Marathon Watch CL800003 Wall Clock with Temperature and Humidity Sensor User Manual 1

Download:
Mirror Download [FCC.gov]
Document ID	2916429
Application ID	Th8+ibkgQDpzbjH90U/VDg==
Document Description	Users Manual 1 English
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	215.32kB (2691505 bits)
Date Submitted	2016-03-01 00:00:00
Date Available	2016-03-01 00:00:00
Creation Date	2016-02-03 12:21:07
Producing Software	GPL Ghostscript 9.05
Document Lastmod	2016-02-03 12:21:07
Document Title	Document1
Document Creator	PDFCreator Version 1.4.1
Document Author:	kenleung

Instruction Manual
Marathon Blueloolh
Wall Clock with
Temperature and
Humidity Sensor
CL800003/CL800003WD
Mummy
. E'El .
‘7' ® “ "
l fill??? $31!?)
I Avlilzbleanth: . Mg ,,,,,,
‘AppStore ‘LmogIe-pray
MARATHON
Marathon Watch Company Ltd.
TF: 1.800.822.4329 - T: 905.764.9420 ' F: 905.764.0035
www.MarathonWatch.com
This device complies with Industry Canada licence-exempt RSS
standard(s). Operatlon Is subject to the followlng two condltlons:
(1) this device may not cause interference, and (2) this device must
accept any interference, including interference that may cause
undesired operation of the device.
Warnin Changes or modifications to this unit not expressly
approved by the party responsible for compliance could void the user
authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the
limits for a Class B digital device, pursuant to Part 15 of the FCC
Rules. These limits are designed to provide reasonable protection
against harmful interference in a residentia Installation. This
equipment generates, uses and can radiate radio frequency energy
and, if not installed and used in accordance with the instructions,
may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined
by turning the equipment off and on, the user is encouraged to try to
correct the interference by one or more of the following measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that
to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.
This device complies with Part 15 of the FCC Rules. Operation is
subject to the following two conditions: (1)this device may not cause
harmful interference, and (2) this device must accept any interference
received, including interference that may cause undesired operation.
FCC Statement
This device complies With Part 15 ofthe FCC rules. Operation locum," of Como.
is subject to the following two conditions: (1) This device may
riot cause harmful interference, and (Qt This device must
accept any interference received, inciuding interference that
may cause undesired operation,
Snooze button _ Reset
Pair
Scroll
PP’Nt“
. Battery door
. Stand
Warning: Changes or modifications to this unit not expressly
approved by the party responsible for compliance could void
the user's authority to operate the equipment,
Alarm on/off 6. Battery Compartment
NOTE: This equipment has been tested and found to comply
with the limits for a Class 8 digital device, pursuant to Part
15 of the FCC Rules. These limits are designed to orovlde
reasonable protection against harmful interference in a a
residential installation This equipment generates, uses and
can radiate radio frequency energy and, if not installed and T Mixfi‘iw.‘ V '
used in accordance With the instructions, may cause harmful l llucwflwm’ IE'ES
interference to radio communications
However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause
harmful interference to radio or television reception, which
can be determined by turning the equipment Off and On, the
user is encouraged to try to correct the interference by one or
more of the followmg measures:
- Recrient or relocate the receiving antenna
‘ Increase the separation between the equipment and
the receivert
- Connect the equipment into an outlet on a circuit different
from that to which the receiver is connected,
' Consult the dealeror an exoerienced radio/TV technician
for help
Japan Radio Law Statement
This product containsthe certified module byJapan Radio Law.
The certification number is 6 IE 0187140077
¥ B
AC
®
MARATHON
l J
2S
Thank you for purchasing the Marathon Bluetooth Wall Clock. This
product is designed to work with iPad, iPhone, iPod, other iOS
devices and Android 4.3 or above deVices.
- Supports iOS version 7.1 or above
- Supports Android version 4.3 or above
' Up to 5 alarms with snooze function
- Take full control of the Bluetooth Wall Clock With app
- Selectable alarm tone pattern and volume
- Temperature and Humidity reading With history chart
that can be read on App without alarm clock connection
- Count down timer
- Monitor the battery status otthe Bluetooth Wall Clock and have
battery warning if it is at low level
- Can stop alarm via App
- Wall mounting or desk stand
- Operating temperature is 0"C to 40° C (23“ F ~ 104 ° Fl
Belore you start using it:
- Please make sure to read the instruction manual carefully.
- FollOWing and respecting the instructions in your manual will
prevent damage to your instrument and avoid causing your
warranty to become void.
- We shall not be liable for any damage occurring as a result of not
following these instructions. Likewise, we take no responsibility
for any incorrect readings and forany consequences which may
result from them
- Please take particular note of the safety advice!
- Please keep this instruction manual forfuture reference
Disposal at Your Old Product
Vour product is deSigned and manufactured With
high quality materials and components, which
can be recycled and reused. When this crossed-
out wheeled bin symbol is attached to a product
lt means the product is covered by the European
Directive 2002/96/ECt Please inform yourself about
the local separate collection system tor electrical and
electronrc products.
Please act according to your local rules and do
not dispose of your old Droducts with your normal
household waste. The correct disposal of your old
product Wlll help prevent potential negative
consequences for the environment and human health.
Disposal at Flat Batteries / Accumulator:
YOU, as the end user, are legally obliged (Battery
Ordinance) to return all flat batteries and
rechargeable batteries.
Disposal in the household waste is prohibited,
"European Directive 2006/66/EC” Batteries, including
rechargeable batteries, which Contain hazardous
substances are marked by symbols which Indicate the
prohibition of disposal in the household Waste, The
desrgnations for the heavy metals concerned are as
follows:
Cd = cadmium, Hg = mercury, Pd = lead. You can
return flat batteries / rechargeable batteries free or
charge to the collection points in your community or
anywhere where batteries/ rechargeable batteries are
Sold. You thus fullill your statutory obligations and help
protect the environment.
Caution
Replace only with the same or equivalent type of
battery, please refer to the engraved battery marks
inside the battery compartment for the correct battery
polarity H) and (7). Danger of explosion is possible if
battery is incorrectly replaced.
This product complies With the requirement of the
1999/5/32 directive.
Use this unit and mobile phone only In envrronments
with ambient temperatures between 0°C and 40"C.
And the maximum operating temperature of the unit
is 40 “C
27
Care of your Bluetooth Wall Clock
Getting Started
- The unit should not be exposed to dripping or splashing of liquid,
- Do not expose unitand/or batteries to liquid, sand or
excessive heat.
- No objects filled with liquids, such as vases, shall be placed on
the unit.
~ Do not cover the unit, Allow adequate space with a small gap
between the buzzer holes and surrounding surfaces.
' To clean the set, use a soft dry cloth. Do not use any cleaning
agents containing alcohol, ammonia, benzene or abrasives as
these may harm the housing.
Manufacturer reserves the right to update the contents of this
manual and App,
26
1. Install battery
11 Open the battery compartment.
1.2 insert 2 x C size batteries in polarity H) and (r) as indicated.
1.3 Close the battery compartment.
2. Install Clock System App on your devrce.
2.1 Access App Store or Google play search for Clock System
2.2 Select and install Clock System App on your mobile device.
Please Note:
User manual is based on OS version and may differ with Android
version which will be specified as supplementary information at
bottom of relative page.
Scroll Funclion
Pairing lhe Blueloolh Wall Clock
Temperature and humidity with clock mode'
3 Pair the Blueloolh Wall Clock with Clock System App.
3.1 Before running the Clock System App, make sure your device I A
has Bluetooth enabled. .
3.2 After you tap the app icon ,the ‘Nearby Devrces' screen .
appears. You need to pair the Bluetooth Wall Clock devrce
before you enter the main app screen.
MAR/mum
. _ ----- - w r i - mm‘mjfl‘d
L. mm a
was"! _‘ . .
”‘ ( ‘ 7‘ “Clock wuh alarm time mode"
(show if any alarm enabled)
“WWW
L .. PM
®
MA R ATH ON
mnmw
I05 Versron 57%‘3-“3’9573 In: flu
TIMER mode
‘rmrhce‘ (only ifthe timer is running)
“" 0 " LL L j M .
L WALL-L, .
. n r \ O
I v
MARATHON
M A R EH 0 N gfiflfififi’fifig
14.2 In autorscrolling mode, each mode will stay 3 seconds and
Andrmd Version
then switch to next display.
25
Scroll Function
14. You can press the [Scroll] button on the Bluetooth Wall Clock
to switch between different information manually. Oryou can
press and hold the [Scroll] button to enable/disable auto-
scrolling display function.
14.1 The scrolling display will be in following order:
“Clock with calendar mode"
PM IE'IEIEL
T ® . .
l 91m! $31521
“Calendar mode"
M n
U - a 3
g m
MARATHON n
"1 D rd Lama] 51.}?! '3 . 38
24
Pairing lhe Bluetoolh Wall Clock
MARATHON
3.3 Tap“ Pair New Device" to search for nearby devices.
3.4 Press and hold the [PAIR] button on the Bluetooth Wall Clock
device for 5 seconds. You will see that the a icon will start
to blink on the clock.
.mmmzs
WNW Wm
M u m cm
iOS Version Android Version
3.5 The new Marathon Bluetooth Wall Clock will be displayed
on the App and is ready for pairing. Tap the Marathon
"Bluetooth Wall Clock" to start the pairing and connection
process. Once the Eluetooth Wall Clock + is paired, it will
start time and data synchronization. 5
Pairing ihe Blueiooih Wall Clock Offline Temperature and Humidity Reading
133 When the Marathon Clock and App are offiine‘ user can
stili read the latest history record from the last connection
by tapping the chart icon on the right hand side of specific
unit list in Nearby Devices screen.
..... , u- .m x -»
Nearby om: g
Mu Wm
Far New Device
®
MARATHON
iOS Version
jumped“, (+1
MaW‘sNam‘
H... 4;“ saw.
Android Version
3.6 After the connection is made, the following information
Wili be synchronized:
i) Current time and date ®
ii) Aiarms&timer setting MARATHON
iii) Unit battery ievel
iv) Temperature and Humidity history Android VBTSiOH
Temperature and Relative Humidity
Pairing the Bluetooth Wall Clock
132 The unit can accumulate temperature / humidity readings
up to 7 days. To read the data tap the conditions then go
into the historical chart showingtemnerature / relative
humidity reading by time and date, including the maximum
and minimum record of each day. Number of historical
records stored in app depends on yourdevice memory.
Note:
(Resetting the unit will clear all memory stored in the unit
and the record in app after synchronization.)
..... v gm t- . mm 5-.
(mm MarysAlm m (Done mem m
mow my,
515:9” 237‘ 215“ 250° ;5 0‘ 263°
59% 53% 430?: an 53%
C) ’57 5}“ M ‘3
iOS Version
75: 247' 255‘ Mar ”,4
52'; 5‘ ‘z 54v, 542', 5217 577a
Android Version 22
No Bluetooth
connection
Bluetooth establishing
connection
Bluetooth connected
successfully
3.7 When the Bluetooth Wall Clock is paired with one device, clock
must be reset to pair With other devrces.
3.8 One device can pair with a maximum of 5 Bluetooth Wall
Clucks at once.
Rename the Blueloolh Wall Clock Temperature and Relative Humidity
4. Rename the device. 13. Current Temperature and Relative Humidity (Conditions)
Tap the device name (default is “Biuetooth Wall Clock") atthe m. 1.... 2..)
top of the screen to edit the device name. (We Maww I n
m, Wu...” 8
9 0'; AN
u , e- » a sum ‘-» ‘
arma- cm 1 (Mme Mmswm r . , i - < an AV
r, d: w
It; 1.
ms Version Android Version
ovrgnrvurop
ASDFGHJKL
ZXCVENM
E e _. m e g .5,“ m.
iOS Version
:1 .. m ..
e E]
iiiff‘ciaek g Mammal j
» _
m. M
’ r 2’ .
1 JD AM 9 on AM In Mm
C. on AM 900 AM
(4' , e
, qu AM MARATHON
/ _ 1 2 3 4 5 o 7 s «a n
, 2 03 AM
GWERIVUiOP
(JAM ASDFGHJKL
m. 9 z x c v a n M u 131 The unit can measure temperature and relative humidity.
“0‘00 a," r.” ._ r m The current temperature and humidity reading will be shown
”" on the App or you can browse it on the Bluetooth Wali Clock
Android Version LCD screen by pressing the “Scroil” button.
Reset the Blueloolh Wall Clock
Battery Status Indicator
12, Reset the Bluetuoth Wall Clock
MARATHON
If the Bluetooth Wall Clock Is not working properly, try to press
RESET button to resume default setting. The LED flashes twice
in (purple) colour, then the LED will flash once per 6 seconds
in red colour.
Maury med Dem
m 5mm mm mm!
W m r. um“ u: WM
WW t Demons “mm
would ymukeio mm
m xmngn
m,» Ramon:
Cum 9x
iOS Version Android Version
After reset, all data in the Bluetooth Wall Clock is deleted.
Press and hold the [PAIR] button again to re—palrthe Bluetooth
Wall Clock. If it has been paired previously with the same devrce,
you can select “Restore" to resume all setting and data or select
“Erase" to start all from scratch.
20
Battery status indicator:
Indicates the battery level of your Bluetooth Wall Clock
device. When the battery level drops below 20%, the battery
icon is ln red status and a low battery warning will pop up as a
reminder to replace the battery
Meanwhile, low battery indicator icon will be shown on the
alarm clock LCD.
..... . mm x-
< Don M m. clam g
_ {W
6 00 am e
Above 60% IE ~
E3 CO am t,
_ or
Between E E WM"!
20% ' 50% a maze;
_ r") UU err ll
Below 20% fl ms
6 00 am
5'. 9 J“ “P.
iDS Version
Above 60% m
Between
20% ~ 50%
Below 20% D
Android Version
Setting the Alarm Time Preference
6. Setting the alarm time 11.1 Snooze Enabled: Tap to select ON/OFF to ena ole/disable the
Snooze function. IfSnooze Enabled is ON, you will have two
6.1 Each Marathon Bluetooth Wall Clock can set up to a maximum more options, which are:
01 5 Alarms. 0n the main screen, tap individual alarm
(e.g. Alarm 1) to enter the alarm setting page. Maximum Snoozes:
,,,,, . ._ The maximum number of times to repeat the snooze
s“: mum function, which can be set to Unlimited or values from 1to 9.
Snooze Duration:
The time duration of snooze function, which can be set
to values from 1 to 15 Minutes.
5 on :im 3 as m
11.2 Alarm Sound Duration:
The alarm duration, which can be set to values from
m 1 to 15 minutes.
11.3 Auto DST update:
It will adjust Daylight Saving Time (DST) automatically based
on yourdevice time Zone setting. The alarm clock will be
iOS Version Android Version automatically one hour ahead of Standard Time in summer
time and will be back to the normal Standard Time when
back to wintertime, accordingto your devices time zone.
11.4 Scroll Display:
Turn on to enable the LCD screen to switch automatically
(screen detail please referto point 14)
11.5 Temperature: Select ‘0 or ‘F
11.6 Time Format: Select 12 or 24 hour format
6.2 The alarm setting screen appears. You can edit and adiust
different items on this screen, which include: 11.7 Date Format: Select MM / DD or DD/ MM day format.
i) Alarm Name: Tap alarm 1, 5 to edit your preferred nameto
this alarm.
ii) Time: Tap to adjust the time for this alarm.
iii) Day of Week: Tap to select which day of week to enable
the alarm.
, If none are selected, the alarm will only sound once.
, If all days are selected, it will sound daily.
iv) Sound pattern: Tap to select which tone pattern (5 patterns
plus one random pattern available) is applied to this alarm. 19
10
Preference
Setting the Alarm Time
11. Preference setting
Tap the a /
and adjust the following items on this screen.
nme Farms!
new, lemon
VVVVV e .-. .... ._
(Doha WWW m (rm Mum
Amusrwm
swam“ (
‘uezune
n Hm mm A.
“W‘WWWW Smell nuvm
mu mm WWW" :—
Mmm. :- fimram :-
_ - wmm mm
M- Fm" M
Shana Emma:
Wm WM
Small bum
mm..."
mm“:
Amonsnhdn
Small mva-v
Vuuwnutum
Ylne Forum
mm mm
m ns' mm
W mule,
Andrnld Version
3 to enter the Preference screen. You can edit
18
V)
Alarm volume level: Tap to select the alarm sound volume level
(three options: Low, Med and High).
6.3 Complete the alarm setting.
I)
Tap {Donel/ to save the alarm setting and turn on
the alarm.
Atthe main screen, user can turn the alarm on / off by
scrolling the (J rlght and left.
....- um a- , mm +-
< um Mary 5 um a mm mm a
‘ 0“ t pm
on M ry . arr"
car New mm
®
M A R ATH o N
I x n r.
iOS Version
E o
gar-Lu . ll
m n
9 an AM In
9 an AM
990 AM
<3 00 AM
9‘ch AM
D CID on
Android Version
11
Remote Alarm OFF
Deleting the Bluelooth Wall Clock Record
6.4 Stop the alarm via App. (iOS version only)
i) When the alarm sounds, enter the App and tap the blinking
icon 1 located under Paired Devices
ii) Tap the / icon to stop the alarm.
..... m. #-
Mumy nmm G
Man/Cs Alarm ,
4 £5
>11erw Dewe
®
MARATHON
iOS Version
6.5 Stop the alarm during lockscreen. (iOS version only)
i) An alarm notification Will pop up on the lockscreen. Swipe
right on the notification and tap “Alarm Cancel" to stop alarm
or “Snooze" to enter snooze mode.
ii) For Android version, the notification icon appears at the top
of status bar. Slide down the status bar to show the
notification and tap “Alarm Cancel" to stop alarm or "Snooze"
to enter snooze mode.
12
10. Delete the Marathon Bluetooth Wall Clock record.
iOS Version
a (non. ”“an m «w. ”mum“ gr...
, «lxrrr
WNW Burrs
® ® ®
MARATHON MARATHON MARATHON
You can tap the Q at Nearby Devices screen to enter the Known
Devices page By tapping “Edit" and then the e , you can select
"Delete" to delete the Bluetooth Wall Clock record on the
current devrce.
Android Version
3mm“... gamma"...
Mary‘s Arm J um Ala'm
® @
MARATHON MARATHON
You can tap the at Nearby Devices screen to enter the Known
Devices page. By tapping “Edit” and then the x , you can select
“Delete" to delete the Bluetootn Wall Clock record on the
current devrce.
17
Setting the Timer
9.2 Using the Timer
In the Home screen, you can tap “Start" under Timerto
start counting.
.... . . .- e . x-
(Dmi Marya Nu m (Dam M'vya/llnrw m
0 hr 0 mil 0 sec 0hr D rrrin 57sec
J .Tj—i—ru . a 53‘
Mm“ I ll
9 cu m é LU I‘M
UUD AM QUUAM
9LU AM ‘1 LU AM
QED/\M QC“ AM
“u fl'DU'DD "- 0'59‘44 Rcm
5w;
Android Version
Then you can tap “Stop” to stop the current timer and Start” to
re-contlnue the tlmer again. The tlmer can be reset by tapping
the [Reset].
16
Snooze Operation
7. Usingthe SNOOZE function
7.1 When the alarm sounds.
press the [SNOOZE] button
to get an extra 5 minutes
of sleep. The snooze will
repeat up to three times.
o l
®
MARATHON
(OW mexua'm a Q”’""""'
5mm mm C‘ 3, mm Ill
Mum s m.
mean w W
. Hm sum 1) m
m “5' “new ( Scroll mum
mm r, -
rm Ln'r'u mew. - ,
mm.‘ .-
ScrollD-apln/
7mm... -—
a; . Amman.“ u
iOS Version Android Version
7.2 The above default value is set by the factory. User can set
the "Maxrmum Snoozes" and “Snooze Duration" ll’l the
preference screen.
13
To Turn OFF the Alarm
8. To disable the alarm
®
MARATHON
9 Jti Nvl
U 3U r'l't’i
9 Jtl AM
~ iOS Version 7 Android Version
8.2 The alarm will sound for 1 minute and stop automatically.
if Snooze is enabled setting is ON. the alarm will repeat every
5 minutes. You can press the [Snooze] button to interrupt the
alarm momentarily, or can press [Alarm] button to turn off the
alarm and stop the snooze function completely.
8.3 User can tap the alarm time to disable the alarm completely
(Please make sure your app is paired with the device)
14
Setting the Timer
9. To set the timer:
Tap timer on main screen and go into timer screen.
< Dan: mm W
0 iv a m u m
, 4 xi
iOS Version
Android Versron
9.1 You can edit and adjust the following items on this screen:
i) Timer period:
Scroll to adjust the timer period.
ii) Sound pattern:
Tap to select the tone pattern (5 patterns plus one random
pattern available).
iii) Sound volume level:
Tap to select the sound volume level [three options: 15
Low, Med and High).

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.4
Linearized                      : No
Page Count                      : 16
XMP Toolkit                     : XMP toolkit 2.9.1-13, framework 1.6
About                           : uuid:0fbe62dc-cc89-11e5-0000-8ede5424e51d
Producer                        : GPL Ghostscript 9.05
Keywords                        : ()
Modify Date                     : 2016:02:03 12:21:07+08:00
Create Date                     : 2016:02:03 12:21:07+08:00
Creator Tool                    : PDFCreator Version 1.4.1
Document ID                     : uuid:0fbe62dc-cc89-11e5-0000-8ede5424e51d
Format                          : application/pdf
Title                           : Document1
Creator                         : kenleung
Description                     : ()
Author                          : kenleung
Subject                         : 

EXIF Metadata provided by EXIF.tools