Marposs E86NP Wireless Industrial Telemeter System User Manual E86N USA CANADA

Marposs SpA Wireless Industrial Telemeter System E86N USA CANADA

Contents

Users Manual Part 2

Download: Marposs E86NP Wireless Industrial Telemeter System User Manual E86N USA CANADA
Mirror Download [FCC.gov]Marposs E86NP Wireless Industrial Telemeter System User Manual E86N USA CANADA
Document ID631073
Application IDimHn3jo1SKBSRJ1NuZlXHA==
Document DescriptionUsers Manual Part 2
Short Term ConfidentialNo
Permanent ConfidentialNo
SupercedeNo
Document TypeUser Manual
Display FormatAdobe Acrobat PDF - pdf
Filesize4.31kB (53853 bits)
Date Submitted2006-02-23 00:00:00
Date Available2006-02-23 00:00:00
Creation Date0000-00-00 00:00:00
Producing SoftwareGNU Ghostscript 7.05
Document Lastmod2006-02-06 08:21:37
Document TitleMicrosoft Word - E86N USA_CANADA.doc
Document CreatorPScript5.dll Version 5.2.2
Document Author: ferraria

DECLARATION FOR U.S.A. FCC
THIS EQUIPMENT HAS BEEN TESTED AND FOUND TO COMPLY WITH THE LIMITS FOR A CLASS B DIGITAL DEVICE,
PURSUANT TO PART 15 OF THE FCC RULES. THESE LIMITS ARE DESIGNED TO PROVIDE REASONABLE PROTECTION
AGAINST HARMFUL INTERFERENCE IN A RESIDENTIAL INSTALLATION. THIS EQUIPMENT GENERATES, USES AND CAN
RADIATE RADIO FREQUENCY ENERGY AND, IF NOT INSTALLED AND USED IN ACCORDANCE WITH THE INSTRUCTIONS,
MAY CAUSE HARMFUL INTERFERENCE TO RADIO COMMUNICATIONS. HOWEVER, THERE IS NO GUARANTEE THAT
INTERFERENCE WILL NOT OCCUR IN A PARTICULAR INSTALLATION. IF THIS EQUIPMENT DOES CAUSE HARMFUL
INTERFERENCE TO RADIO OR TELEVISION RECEPTION, WHICH CAN BE DETERMINED BY TURNING THE EQUIPMENT OFF
AND ON, THE USER IS ENCOURAGED TO TRY TO CORRECT THE INTERFERENCE BY ONE OR MORE OF THE FOLLOWING
MEASURES:
· REORIENT OR RELOCATE THE RECEIVING ANTENNA
· INCREASE THE SEPARATION BETWEEN THE EQUIPMENT AND THE RECEIVER.
· CONNECT THE EQUIPMENT INTO AN OUTLET ON A CIRCUIT DIFFERENT FROM THAT TO WHICH THE RE
CEIVER IS CONNECTED.
· CONSULT THE DEALER OR AN EXPERIENCED RADIO/TV TECHNICIAN FOR HELP.
CHANGES OR MODIFICATIONS NOT EXPRESSLY APPROVED IN WRITING BY THE MANUFACTURER MAY VOID THE USER´S
AUTHORITY TO OPERATE THIS EQUIPMENT.
THIS DEVICE COMPLIES WITH PART 15 OF THE FCC RULES.
OPERATION IS SUBJECT TO THE FOLLOWING TWO CONDITIONS:
(1) THIS DEVICE MAY NOT CAUSE HARMFUL INTERFERENCE, AND (2) THIS DEVICE MUST ACCEPT ANY INTERFERENCE
RECEIVED, INCLUDING INTERFERENCE THAT MAY CAUSE UNDESIRED OPERATION.
DECLARATION FOR CANADA RSS-GEN
OPERATION IS SUBJECT TO THE FOLLOWING TWO CONDITIONS:
(1) THIS DEVICE MAY NOT CAUSE INTERFERENCE, AND (2) THIS DEVICE MUST ACCEPT ANY INTERFERENCE, INCLUDING
INTERFERENCE THAT MAY CAUSE UNDESIRED OPERATION OF THE DEVICE.
MARPOSS S.p.A. does not take on the obligation of notifying possible further changes to the product.
The descriptions reported in this book not authorize any tampering by non-authorized personnel.
The warranty on the equipments will decay if such tamperings are found.
MARPOSS S.p.A. non assume l'obbligo di notificare eventuali successive modifiche al prodotto.
Le descrizioni riportate nel presente libro non autorizzano in alcun modo manomissioni da parte di personale non autorizzato.
La garanzia sulle apparecchiature decade nel momento in cui tali manomissioni vengano riscontrate.
MARPOSS S.p.A. ist nicht verpflichtet, nachträgliche Produktänderungen mitzuteilen.
Die in diesem Handbuch enthaltenen Beschreibungen rechtfertigen keine Eingriffe durch nicht dazu ermächtiges Personal.
Bei Feststellung derartiger Eingriffe verfällt der Garantieanspruch.
La Société MARPOSS S.p.A. n'est pas tenue de notifier les éventuelles modifications qu'elle pourra apporter au produit.
Les descriptions figurant dans le présent livret n'autorisent en aucune façon des interventions du personnel non autorisé.
La garantie sur les appareils ne s'appliquera pas si sont constatées des interventions de ce genre.
© Copyright Marposs 2006

Source Exif Data:
File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.3
Linearized                      : No
XMP Toolkit                     : 3.1-702
Creation Date--Text             : 2/3/2006 13:51:36
Producer                        : GNU Ghostscript 7.05
Format                          : application/pdf
Creator                         : ferraria
Title                           : Microsoft Word - E86N USA_CANADA.doc
Creator Tool                    : PScript5.dll Version 5.2.2
Modify Date                     : 2006:02:06 08:21:37+01:00
Metadata Date                   : 2006:02:06 08:21:37+01:00
Document ID                     : uuid:c350454b-fc3e-49eb-b187-62f546445de4
Instance ID                     : uuid:d7c46fd3-a2d2-447c-9c0c-a69d04603be3
Page Count                      : 1
Create Date                     : 2/3/2006 13:51:36
Author                          : ferraria
EXIF Metadata provided by EXIF.tools
FCC ID Filing: NXIE86NP

Navigation menu