Marshall Amplification Plc CODE MD116D Guitar Amplifiers User Manual

Marshall Amplification Plc MD116D Guitar Amplifiers

User Manual

QUICK STARTENGLISHTHE 50 WATT CONNECTED AMP1) Read these instructions.2) Keep these instructions.3) Heed all warnings.4) Follow all instructions.5) Do not use this apparatus near water.6) Clean only with dry cloth.7) Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including ampliers) that produce heat.8) Do not defeat the safety purpose of the polarised or grounding-type plug. A polarised plug has two blades with one wider than the other. A grounding type plug has two blades and a third grounding prong. The wide blade or the third prong are provided for your safety. If the provided plug does not t into your outlet, consult an electrician for replacement of the obsolete outlet.9) Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point where they exit from the apparatus.10) Only use attachments/accessories specied by the manufacturer.11) Unplug this apparatus during lightning storms or when unused for long periods of time.12) Refer all servicing to qualied service personnel. Servicing is required when the apparatus has been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.13) WARNING: To reduce the risk of re or electric shock, do not expose this apparatus to rain or moisture.14) The appliance coupler is used as the disconnect device, the disconnect device shall remain readily operable. 15) The apparatus shall not be exposed to dripping or splashing and that no objects lled with liquid, such as vases, shall be placed on the apparatus. IMPORTANT SAFETY INFORMATION This “bolt of lightning” symbol indicates uninsulated material within your unit may cause an electric shock. For the safety of everyone in your household, please do not remove product covering. The “exclamation point” calls attention to features for which you should read the enclosed literature closely to prevent operating and maintenance problems.2200This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation.Warning: Changes or modications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:- Reorient or relocate the receiving antenna.- Increase the separation between the equipment and receiver.- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. - Consult the dealer or an experienced radio/TV technician for help.This equipment complies with FCC RF radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 20 centimeters between the radiator and your body. Industry Canada caution. This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions: (1) This device may not cause interference, and (2) This device must accept any interference, including interference that may cause undesired operation of the device. Francais:Le présent appareil est conforme aux CNR d’Industrie Canada applicables aux appareils radio exempts de licence. L’exploitation est autorisée aux deux conditions suivantes: (1) l’appareil ne doit pas produire de brouillage, et (2) l’utilisateur de l’appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d’en compromettre le fonctionnement.COMPLIANCE STATEMENT
Whilst the information contained herein is correct at the time of publication, due to its policy of constant improvement and development, Marshall Amplification Plc reserves the right to alter specifications without prior notice.Marshall Amplication Plc, Denbigh Road, Bletchley, Milton Keynes, MK1 1DQ, England.Telephone: +44 (0) 1908 375411 | Fax: +44 (0) 1908 376118Registered in England. Registered Number: 805676MARSHALLAMPS.COM | #LIVEFORMUSICCODE is a new generation of Marshall amplier featuring Marshall Softube Technology (MST). Fully programmable, CODE combines authentic modelling of classic and contemporary Marshall tones with studio quality FX. CODE in-corporates full Bluetooth® control and audio streaming using the Marshall Gateway™ App. Thank you for choosing Marshall.- The Marshall Team.WELCOME TO CODEWhat is a Preset?A Preset is a group of amplier & speaker models, with tonal settings and FX: Chorus, Delay, Reverb etc, stored to a single location within your CODE amplier’s memory. This is like a ‘snapshot’ of the whole amplier’s settings (excluding MASTER volume), which can be recalled using the PRESET selector, the Marshall Gateway™ App or with the CODE footcontroller (PEDL-91009, sold separately). Exploring PresetsTurn the PRESET selector to explore CODE’s factory Presets.PRESETS!Discover how to create your own Presets in the full CODE Owner’s Manual at marshallamps.comCODE has 100 editable Presets: 50 factory, which you can modify to create your own personal Presets, and 50 blank for you to create your own personal Presets from scratch.!The Preset name, number and active Sections will show on the display screen. Take some time to listen to the factory Presets before creating your own unique sound.CODE’s control knobs adjust GAIN, BASS, MIDDLE, TREBLE and VOLUME. Because these settings are stored as part of a Preset, the control knobs are inactive until used. This means that until they are turned their position is not related to their setting within a Preset.CONTROLSYou can QUICK STORE your setting changes at any point by pressing and holding down the EXIT/STORE switch. CAUTION: When you use QUICK STORE, the existing Preset will be overwritten with your setting changes.When you turn a control knob it becomes active. The display screen will show the name and setting of whichever control you are using. !Your adjusted settings will remain active until you move off the current Preset. When you return to that Preset its settings will have reverted back to what is stored.!GETTING STARTEDPlug your guitar cable into to your guitar and into the amplier INPUT jack socket. Gradually turn the MASTER up to your desired volume level. Set the MASTER volume control to zero.Turn the amplier ON using the ON/OFF switch.Connect the supplied power cord to the rear of the amplier before plugging into the mains electricity supply.Ensure that the ON/OFF switch is set to the OFF position.Always use a good quality screened/shielded ¼” jack to jack guitar cable.!Download the Marshall Gateway™ App, which is available now from the App Store and Google Play, to control CODE with your iOS or Android device via Bluetooth.GET CONNECTEDConnect your iOS or Android device via Bluetooth, your MP3 player via the dedicated MP3 mini jack socket, or your computer via USB, to stream tracks from your music library through CODE. Connect to your preferred audio software via USB to use CODE as a digital recording interface.CATS-00222-01The Bluetooth® word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any use of such marks by Marshall Amplication Plc is under license. Other trademarks and trade names are those of their respective owners.

Navigation menu