Marshall Amplification Plc CODE MD116D Guitar Amplifiers User Manual

Download:
Mirror Download [FCC.gov]
Document ID	2827641
Application ID	QUxTaq21xqTPo82aKUhkXw==
Document Description	User Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	145.57kB (1819605 bits)
Date Submitted	2015-12-01 00:00:00
Date Available	2015-12-01 00:00:00
Creation Date	2015-10-13 16:35:18
Producing Software	Adobe PDF Library 11.0
Document Lastmod	2015-10-13 16:35:20
Document Title	User Manual
Document Creator	Adobe InDesign CC 2014 (Macintosh)

T H E 5 0 WAT T C O N N E C T E D A M P
QUICK START
ENGLISH
IMPORTANT SAFETY INFORMATION
1) Read these instructions.
2) Keep these instructions.
3) Heed all warnings.
4) Follow all instructions.
5) Do not use this apparatus near water.
6) Clean only with dry cloth.
7) Do not install near any heat sources such as
radiators, heat registers, stoves, or other apparatus
(including amplifiers) that produce heat.
8) Do not defeat the safety purpose of the
polarised or grounding-type plug. A polarised plug
has two blades with one wider than the other. A
grounding type plug has two blades and a third
grounding prong. The wide blade or the third
prong are provided for your safety. If the provided
plug does not fit into your outlet, consult an
electrician for replacement of the obsolete outlet.
9) Protect the power cord from being walked on
or pinched particularly at plugs, convenience
receptacles, and the point where they exit from
the apparatus.
10) Only use attachments/accessories specified
by the manufacturer.
11) Unplug this apparatus during lightning
storms or when unused for long periods of time.
12) Refer all servicing to qualified service
personnel. Servicing is required when the
apparatus has been damaged in any way, such
as power-supply cord or plug is damaged, liquid
has been spilled or objects have fallen into the
apparatus, the apparatus has been exposed to
rain or moisture, does not operate normally, or
has been dropped.
This “bolt of lightning” symbol indicates uninsulated material
within your unit may cause an electric shock. For the safety of
everyone in your household, please do not remove product covering.
13) WARNING: To reduce the risk of fire or
electric shock, do not expose this apparatus to
rain or moisture.
14) The appliance coupler is used as the
disconnect device, the disconnect device shall
remain readily operable.
15) The apparatus shall not be exposed to
dripping or splashing and that no objects filled
with liquid, such as vases, shall be placed on the
apparatus.
The “exclamation point” calls attention to features for which
you should read the enclosed literature closely to prevent
operating and maintenance problems.
COMPLIANCE STATEMENT
This device complies with Part 15 of the FCC
Rules.
Operation is subject to the following two
conditions: (1) This device may not cause harmful
interference, and (2) This device must accept any
interference received, including interference that
may cause undesired operation.
Warning: Changes or modifications to this unit
not expressly approved by the party responsible
for compliance could void the user’s authority to
operate the equipment.
residential installation. This equipment generates,
uses and can radiate radio frequency energy and,
if not installed and used in accordance with the
instructions, may cause harmful interference
to radio communications. However, there is no
guarantee that interference will not occur in a
particular installation. If this equipment does
cause harmful interference to radio or television
reception, which can be determined by turning
the equipment off and on, the user is encouraged
to try to correct the interference by one or more
of the following measures:
- Consult the dealer or an experienced radio/TV
technician for help.
Operation is subject to the following two
conditions:
(1) This device may not cause interference, and
(2) This device must accept any interference,
including interference that may cause undesired
operation of the device.
This equipment complies with FCC RF radiation
exposure limits set forth for an uncontrolled
environment. This equipment should be installed
and operated with a minimum distance of 20
centimeters between the radiator and your body.
Francais:
Le présent appareil est conforme aux CNR
d’Industrie Canada applicables aux appareils
radio exempts de licence. L’exploitation est
autorisée aux deux conditions suivantes:
- Connect the equipment into an outlet on a
circuit different from that to which the receiver
is connected.
- Reorient or relocate the receiving antenna.
Note: This equipment has been tested and found
to comply with the limits for a Class B digital
device, pursuant to Part 15 of the FCC Rules.
These limits are designed to provide reasonable
protection against harmful interference in a
2200
Industry Canada caution.
- Increase the separation between the equipment
and receiver.
This device complies with Industry Canada
licence-exempt RSS standard(s).
(1) l’appareil ne doit pas produire de brouillage, et
(2) l’utilisateur de l’appareil doit accepter tout
brouillage radioélectrique subi, même si le
brouillage est susceptible d’en compromettre le
fonctionnement.
WELCOME TO CODE
CONTROLS
CODE is a new generation of Marshall amplifier featuring Marshall Softube
Technology (MST). Fully programmable, CODE combines authentic modelling
of classic and contemporary Marshall tones with studio quality FX. CODE incorporates full Bluetooth® control and audio streaming using the Marshall
Gateway™ App. Thank you for choosing Marshall.
- The Marshall Team.
CODE’s control knobs adjust GAIN, BASS, MIDDLE, TREBLE and VOLUME.
Because these settings are stored as part of a Preset, the control knobs are
inactive until used. This means that until they are turned their position is not
related to their setting within a Preset.
GETTING STARTED
When you turn a control knob it becomes active. The display screen
will show the name and setting of whichever control you are using.
Your adjusted settings will remain active until you move off the
current Preset. When you return to that Preset its settings will have
reverted back to what is stored.
Ensure that the ON/OFF switch is set to the OFF position.
Connect the supplied power cord to the rear of the amplifier before
plugging into the mains electricity supply.
Plug your guitar cable into to your guitar and into the amplifier INPUT
jack socket.
Always use a good quality screened/shielded ¼” jack to jack guitar
cable.
You can QUICK STORE your setting changes at any point by pressing and
holding down the EXIT/STORE switch.
Set the MASTER volume control to zero.
Turn the amplifier ON using the ON/OFF switch.
CAUTION: When you use QUICK STORE, the existing Preset will be overwritten
with your setting changes.
Gradually turn the MASTER up to your desired volume level.
PRESETS
What is a Preset?
A Preset is a group of amplifier & speaker models, with tonal settings and FX:
Chorus, Delay, Reverb etc, stored to a single location within your CODE
amplifier’s memory. This is like a ‘snapshot’ of the whole amplifier’s settings
(excluding MASTER volume), which can be recalled using the PRESET
selector, the Marshall Gateway™ App or with the CODE footcontroller
(PEDL-91009, sold separately).
CODE has 100 editable Presets: 50 factory, which you can modify to
create your own personal Presets, and 50 blank for you to create your
own personal Presets from scratch.
GET CONNECTED
Download the Marshall Gateway™ App, which is
available now from the App Store and Google Play,
to control CODE with your iOS or Android
device via Bluetooth.
Connect your iOS or Android device via Bluetooth, your MP3 player via the
dedicated MP3 mini jack socket, or your computer via USB, to stream tracks
from your music library through CODE.
Connect to your preferred audio software via USB to use CODE as a digital
recording interface.
Exploring Presets
Turn the PRESET selector to explore CODE’s factory Presets.
The Preset name, number and active Sections will show on the display
screen. Take some time to listen to the factory Presets before creating your
own unique sound.
Discover how to create your own Presets in the full CODE Owner’s
Manual at marshallamps.com
The Bluetooth® word mark and logos are registered trademarks owned by Bluetooth
SIG, Inc. and any use of such marks by Marshall Amplification Plc is under license. Other
trademarks and trade names are those of their respective owners.
MARSHALLAMPS.COM | #LIVEFORMUSIC
CATS-00222-01
Marshall Amplification Plc, Denbigh Road, Bletchley, Milton Keynes, MK1 1DQ, England.
Telephone: +44 (0) 1908 375411 | Fax: +44 (0) 1908 376118
Registered in England. Registered Number: 805676
Whilst the information contained herein is correct at the time of publication, due to its policy of constant improvement and development, Marshall Amplification Plc reserves the right to alter specifications without prior notice.

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.7
Linearized                      : Yes
XMP Toolkit                     : Adobe XMP Core 5.6-c014 79.156797, 2014/08/20-09:53:02
Create Date                     : 2015:10:13 16:35:18+01:00
Metadata Date                   : 2015:10:13 16:35:20+01:00
Modify Date                     : 2015:10:13 16:35:20+01:00
Creator Tool                    : Adobe InDesign CC 2014 (Macintosh)
Instance ID                     : uuid:b670ea4e-c19f-ff48-b13b-b908c161ef55
Original Document ID            : xmp.did:d8ab5c6a-d64c-4012-9ceb-69fbf87bf7db
Document ID                     : xmp.id:ec58f416-9baf-4cd4-b4d1-30fed0c4d029
Rendition Class                 : proof:pdf
Derived From Instance ID        : xmp.iid:5f349c03-6616-484f-ad21-cb37f58c4858
Derived From Document ID        : xmp.did:f42ed18e-f0d0-476c-b2bf-6a3699b27794
Derived From Original Document ID: xmp.did:d8ab5c6a-d64c-4012-9ceb-69fbf87bf7db
Derived From Rendition Class    : default
History Action                  : converted
History Parameters              : from application/x-indesign to application/pdf
History Software Agent          : Adobe InDesign CC 2014 (Macintosh)
History Changed                 : /
History When                    : 2015:10:13 16:35:18+01:00
Format                          : application/pdf
Producer                        : Adobe PDF Library 11.0
Trapped                         : False
Page Count                      : 2
Creator                         : Adobe InDesign CC 2014 (Macintosh)

EXIF Metadata provided by EXIF.tools