Marson Technology Co MT100A Mini Wireless Barcode Reader User Manual MT100A QG revFCC
Marson Technology Co Ltd Mini Wireless Barcode Reader MT100A QG revFCC
Users Manual
| Download: |  |
| Mirror Download [FCC.gov] | |
| Document ID | 3112008 |
| Application ID | O2FDrrD8ZemWj4ocX+UTjw== |
| Document Description | Users Manual |
| Short Term Confidential | No |
| Permanent Confidential | No |
| Supercede | No |
| Document Type | User Manual |
| Display Format | Adobe Acrobat PDF - pdf |
| Filesize | 70.32kB (879026 bits) |
| Date Submitted | 2016-08-25 00:00:00 |
| Date Available | 2017-02-21 00:00:00 |
| Creation Date | 2016-07-28 10:14:03 |
| Producing Software | Adobe PDF library 9.00 |
| Document Lastmod | 2016-07-28 10:14:03 |
| Document Title | MT100A QG - revFCC |
| Document Creator | Adobe Illustrator CS4 |
Mini Wireless Barcode Reader Quick Guide For full user’s manual, please contact your local distributor. Mini Wireless Barcode Reader Quick Guide (Rev7) P/N: 8012-0061000 FCC WARNING STATEMENT This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one of the following measures: • Reorient or relocate the receiving antenna. • Increase the separation between the equipment and receiver. • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. • Consult the dealer or an experienced radio/TV technician for help. CANADIAN DOC STATEMENT This digital apparatus does not exceed the Class B limits for radio noise for digital apparatus set out in the Radio Interference Regulations of the Canadian Department of Communications. Le présent appareil numérique n’émet pas de bruits radioélectriques dépassant les limites applicables aux appareils numériques de las classe B prescrites dans le Réglement sur le brouillage radioélectrique édicté par les ministère des Communications du Canada. CE MARKING AND EUROPEAN UNION COMPLIANCE Testing for compliance to CE requirements was performed by an independent laboratory. The unit under test was found compliant with all the applicable Directives, 2004/108/EC and 2006/95/EC. NON-MODIFICATION STATEMENT Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. This device and its antenna must not be co-located or operating in conjunction with any other antenna or transmitter. -1- RoHS WARNING AND CAUTION 1. Take any metals into contact with the terminals in connectors. 2. Use the scanner where any inflammable gases. If following condition occur, immediately power off the host computer, disconnect the interface cable, and contact your nearest dealer. 1. Smoke, abnormal odors or noises come from the scanner. 2. Drop the scanner so as to affect the operation or damage its housing. Do not do behavior below. 1. Put the scanner in places excessively high temperatures such as expose under direct sunlight. 2. Use the scanner in extremely humid area or drastic temperature changes. 3. Place the scanner in oily smoke or steam environment such as cooking range. 4. Be covered or wrapped up the scanner in bad-ventilated area such as under cloth or blanket. 5. Insert or drop foreign materials or water into scanning window or vents. 6. Using the scanner while hand is wet or damp. 7. Use the scanner with anti-slip gloves containing plasticizer and Do Not chemicals or organic solvents such as benzene, thinner, insecticide etc to clean the housing. Otherwise, it could not result fire and electrical shock but housing may be broken and injured. 8. Scratch or modify the scanner and bend, twist, pull or heat its interface cable. 9. Put heavy objects on interface cable. Do not stare the light source from the scanning window or do not point the scanning window at other people’s eyes or eyesight may be damaged by direct exposure under the light. Do not put the scanner on an unstable or inclined plane. The scanner may drop, creating injuries. Once the interface cable is damaged such as exposed or broken copper wires, stop using immediately and contact your dealer. Otherwise, it could result fire or electrical shock. -2- OUT OF THE BOX INTRODUCTION Trigger LED Indicator Mini Wireless Barcode Reader Mini USB port (w/ Protective Cover) Exit Window NUMERIC BARCODES Mini Wireless Barcode Reader *1* *2* *3* *4* *5* Quick Guide Quick Guide Quick Connection Card USB Charger Cable Hand Strap -3- SPECIFICATIONS Sensor Resolution Indicator PCS Housing Profile Battery Life Charge Time Radio Coverage Symbologies Linear CMOS sensor 4mil/ 0.1mm LED, Buzzer 30% Plastic(PC) SPP, HID 6000 scans (1 scan/ 5 sec) 2 hours (fully charged) Bluetooth 2.1 + EDR (Class2) 10M/33ft. (line of sight) All major 1D barcodes incl. GS1 Databar -4- BEEPER INDICATION GETTING STARTED Single long beep Single beep Single short beep Two beeps To scan a barcode, make sure the aiming beam crosses every bar and space of the barcode. Two short beeps Four beeps (Hi-Lo-Hi-Lo) Five beeps Three beeps Three short beeps CHARGING THE BATTERY Host USB A Scanner Mini USB 1. Flip open the mini USB port on the scanner. 2. Insert the mini USB connector into the port on the scanner and USB A connector into a USB port on the host PC. -5- Several short beeps Power up Good read The scanner reads a Code39 of ASCII in configuration procedure i. Wireless connection ii. The scanner successfully reads a configuration barcode Good read (Batch mode/Memory mode) Out of range/Poor connection Low power Wireless disconnection i. The scanner reads a barcodes while disconnected. ii. The scanner reads an unexpected barcode during configuration procedure. (scan [ABORT] to abort and start over) The scanner switches from one communication mode to another LED INDICATION Off Flashing Green Green for 2 sec Flashing Red Solid Red Standby or Power off Disconnected or Discoverable Good Read Low power Charging -6- GETTING CONNECTED PINCODE SETUP There are two modes of wireless communication: . E043$ *.E043$* [ Recommended ] BT mode - HID 1. Press the trigger for 1 second to activate the scanner. 2. Scan [DISCONNECT] 3. Scan [BT mode - HID]; the scanner will emit several beeps. 4. Select “Wireless Scanner” from discovered device list. 5. The Bluetooth application may prompt you to scan a pincode(see PINCODE SETUP section) it generated. 6. The scanner will beep twice to verify the connection. . E042$ *.E042$* BT mode - SPP 1. Press the trigger for 1 second to activate the scanner. 2. Scan [DISCONNECT] 3. Scan [BT mode - SPP]; the scanner will emit several beeps. 4. Select “Wireless Scanner” from discovered device list. The default pincode is “1234”. 5. Open serial communication software with com port (see Device Manager) properly set up. 6. The scanner will beep twice to verify the connection. . E032$ STEP 1 Pincode Start *.E032$* STEP 2 Scan numeric barcodes (see NUMERIC BARCODES section on the next pages) based on the pincode generated by the Bluetooth application. STEP 3 $TX *$TX* Enter STEP 4 Pincode Stop . E033$ *.E033$* . E031$ *.E031$* -7- Disconnect -8- NUMERIC BARCODES *1* *2* *3* *4* *5* -9- *6* *7* *8* *9* *0* - 10 - POWER OFF TIMEOUT The period of inactivity before auto power-off. Variable Timeout Simply follow instruction in [BT mode - HID] (page 7) ,in which step 5 can be skipped since iOS & Android will not require pin-code for connection. . B030$ *.B030$* *.B029$* SMARTPHONE/TABLET CONNECTION Getting Connected - iOS & Android SET MINUTE (Range: 00 ~ 60) . B029$ SET SECOND (Range: 00 ~ 60) The default timeout is 3 minutes 0 second. For example, to set the timeout as 5 minutes 30 seconds: 1. Scan [Set Minute] 2. Scan [0] & [5] on page 9 & 10. 3. Scan [Set Minute] 4. Scan [Set Second] 5. Scan [3] & [0] on page 9 & 10. 6. Scan [Set Second] No Timeout (Scanner Always On) Touch Keyboard - iOS . E047$ ENABLE iOS HOTKEY After enabling iOS Hotkey(disabled by default), you may simply double-click the trigger to toggle the iPhone/iPad Touch Keyboard. Touch Keyboard - Android Please follow below steps to toggle Android virtual keybaord: 1. Enter “Settings” 2. Enter “Language & input” 3. In Keyboard & input window, tap “Default” to continue. 4. Turn off “Hardware - Physical keyboard”, and the Touch Keyboard will function properly again. . B021$ *.B021$* - 11 - DISABLE TIMEOUT - 12 - INTERFACE SELECTION BATCH MODE . E043$ *.E043$* *.E042$* *.C008$* *.C006$* . E054$ BT HID ENABLE . E042$ . E053$ BT SPP . C008$ USB HID . C006$ USB VCP 1. BT HID - Emulates a Bluetooth HID keyboard that transmits each barcode data to the host. (see page 9 for defails) 2. BT SPP - Emulates a Bluetooth SPP device that transmits each barcode data to the host. (see page 9 for details) 3. USB HID - Emulates a USB keyboard that transmits each barcode data to the host. 4. USB VCP - Emulates a USB virtual com device that transmits each barcode data to the host. - 13 - DISABLE In Batch Mode, data will be temporarily stored in memory buffer (2KB RAM) when the scanner is out of range or in poor connection quality. Once the scanner gets back in range, the stored data will be sent back to the host immediately, which will also be erased in memory buffer at the same time. Batch Mode can only function in the following conditions: 1. The scanner has been connected to a host device. 2. The scanner is NOT in Memory Mode. - 14 - GENERAL SETTINGS READING MODE . A001$ . F002$ DEFAULT TRIGGER . P023$ . F003$ ABORT TOGGLE . A007$ CHECK VERSION BEEPER . F001$ FLASH . F005$ CONTINUOUS . F012$ BEEP OFF . F018$ BEEP ON - 15 - . F006$ CONTINUOUS AUTO OFF - 16 - KEYBOARD LAYOUT . C010$ ENGLISH (USA) JAPAN (106 key) ENGLISH (UK) CANADIAN (FRENCH) FRENCH CANADIAN (TRADITIONAL) . C018$ . C009$ . C025$ . C034$ . C012$ . C029$ . C011$ GERMAN NORWEGIAN . C026$ . C014$ ITALIAN SWEDISH . C031$ . C013$ SPANISH - 17 - PORTUGUESE - 18 - KEYBOARD LAYOUT . C017$ CZECH (QWERTY) BELGIAN (AZERTY) . C030$ . C028$ . C022$ CZECH (QWERTZ) DUTCH . C027$ . C021$ HUNGARIAN (QWERTZ) DANISH . C032$ . C024$ HUNGARIAN (101 KEY) SLOVAK . C033$ . C016$ SWISS (GERMAN) . C023$ SWISS (FRENCH) - 19 - BRAZILIAN (PORTUGUESE) . C015$ ALT CODE - 20 - ENABLE SYMBOLOGIES . G010$ . A002$ ENABLE ALL CODE CODE 93 . N017$ . K010$ CODE 32 IATA . L014$ . L010$ UK PLESSEY TELEPEN . L001$ . N032$ MSI GS1 DATABAR INDUSTRIAL 2 OF 5 GS1 DATABAR LIMITED MATRIX 2 OF 5 GS1 DATABAR EXPANDED . N010$ . N001$ . M010$ - 21 - . N026$ - 22 - TERMINATOR . D012$ CR . D011$ The following pages only apply to the memory version mini wireless scanner. LF . D013$ CR + LF . D010$ NONE The firmware version with suffix “MEM” supports memory function. e.g. SM3-c-X.XX.BTA.MEM The firmware version can be found either on the scanner box or by scanning below barcode. . A007$ . D015$ SPACE CHECK VERSION . D014$ TAB - 23 - - 24 - MEMORY MODE For memory version only DATA FORMAT For memory version only . R011$ . C035$ *.c035$* DATA FORMAT MEMORY MODE After scanning the above barcode, the scanner will be able to collect barcode data off-line. The barcode data will be stored in the format of: < Date >, < Time >, < Barcode Data > < CR > To retrieve stored data, please connect the scanner to the host with cable, access removable storage device “MiniScan” from which you may open or copy the file “BARCODE.txt” to your computer. To delete ONE stored data, please scan below barcode : *.R011$* The default Data Format isonly below are all items available for display and their codes: Code Item Code Item Date Barcode Data Time Example: To change Data Format to , ,
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.5 Linearized : No XMP Toolkit : Adobe XMP Core 4.2.2-c063 53.351735, 2008/07/22-18:11:12 Format : application/pdf Title : MT100A QG - revFCC Metadata Date : 2016:07:28 10:14:03+08:00 Modify Date : 2016:07:28 10:14:03+08:00 Create Date : 2016:07:28 10:14:03+09:00 Creator Tool : Adobe Illustrator CS4 Thumbnail Width : 256 Thumbnail Height : 16 Thumbnail Format : JPEG Thumbnail Image : (Binary data 2740 bytes, use -b option to extract) Instance ID : uuid:f8c8a4e7-79d0-400f-87bc-5cfb0d27b30e Document ID : xmp.did:CE002DF26854E611A0DDB87FA8FEC18F Original Document ID : uuid:5D20892493BFDB11914A8590D31508C8 Rendition Class : proof:pdf Derived From Instance ID : uuid:524ead5e-e9da-4e13-94af-4ceffe255bdf Derived From Document ID : xmp.did:78B40750F9F3E2118B6791199F480930 Derived From Original Document ID: uuid:5D20892493BFDB11914A8590D31508C8 Derived From Rendition Class : proof:pdf History Action : converted, saved, converted, converted, saved, saved, saved, saved, saved, converted, saved, converted, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, converted, saved, converted, saved, converted, saved, converted, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved History Instance ID : xmp.iid:D27F11740720681191099C3B601C4548, xmp.iid:F97F1174072068118D4ED246B3ADB1C6, xmp.iid:FA7F1174072068118D4ED246B3ADB1C6, xmp.iid:EF7F117407206811A46CA4519D24356B, xmp.iid:F07F117407206811A46CA4519D24356B, xmp.iid:F77F117407206811BDDDFD38D0CF24DD, xmp.iid:F97F117407206811BDDDFD38D0CF24DD, xmp.iid:FA7F117407206811BDDDFD38D0CF24DD, xmp.iid:FB7F117407206811BDDDFD38D0CF24DD, xmp.iid:FC7F117407206811BDDDFD38D0CF24DD, xmp.iid:FD7F117407206811BDDDFD38D0CF24DD, xmp.iid:FE7F117407206811BDDDFD38D0CF24DD, xmp.iid:B233668C16206811BDDDFD38D0CF24DD, xmp.iid:B333668C16206811BDDDFD38D0CF24DD, xmp.iid:B433668C16206811BDDDFD38D0CF24DD, xmp.iid:F77F11740720681197C1BF14D1759E83, xmp.iid:F87F11740720681197C1BF14D1759E83, xmp.iid:F97F11740720681197C1BF14D1759E83, xmp.iid:FA7F117407206811B628E3BF27C8C41B, xmp.iid:FF7F117407206811B628E3BF27C8C41B, xmp.iid:07C3BD25102DDD1181B594070CEB88D9, xmp.iid:F87F1174072068119098B097FDA39BEF, xmp.iid:F77F117407206811BB1DBF8F242B6F84, xmp.iid:F97F117407206811ACAFB8DA80854E76, xmp.iid:0180117407206811834383CD3A8D2303, xmp.iid:01E540664A3DDD11BD33D3EB8D3A1068, xmp.iid:6B6AE2A5723EDD11A6F1BABF7C5A7A51, xmp.iid:BFB9DE0A9741DD11B635A7E64BB34B63, xmp.iid:0B9FED2F200A11689FE8CB9EA85C5459, xmp.iid:99D9A2DF7848DD11BB47877F8DDF9079, xmp.iid:FA7F117407206811ACAFBB7619075ADF, xmp.iid:F97F11740720681195FEE5A36E835ED7, xmp.iid:FB7F11740720681195FEE5A36E835ED7, xmp.iid:FC7F11740720681195FEE5A36E835ED7, xmp.iid:F66EA07E6B4DE211A83CD6F0639901B0, xmp.iid:78B40750F9F3E2118B6791199F480930, xmp.iid:CE002DF26854E611A0DDB87FA8FEC18F History When : 2008:04:17 14:19:15+05:30, 2008:05:15 16:23:06-07:00, 2008:05:15 17:10:45-07:00, 2008:05:15 22:53:33-07:00, 2008:05:15 23:07:07-07:00, 2008:05:16 10:35:43-07:00, 2008:05:16 10:40:59-07:00, 2008:05:16 11:26:55-07:00, 2008:05:16 11:29:01-07:00, 2008:05:16 11:29:20-07:00, 2008:05:16 11:30:54-07:00, 2008:05:16 11:31:22-07:00, 2008:05:16 12:23:46-07:00, 2008:05:16 13:27:54-07:00, 2008:05:16 13:46:13-07:00, 2008:05:16 15:47:57-07:00, 2008:05:16 15:51:06-07:00, 2008:05:16 15:52:22-07:00, 2008:05:22 13:28:01-07:00, 2008:05:22 16:23:53-07:00, 2008:05:28 16:45:26-07:00, 2008:06:02 13:25:25-07:00, 2008:06:09 14:58:36-07:00, 2008:06:11 14:31:27-07:00, 2008:06:11 22:37:35-07:00, 2008:06:18 22:24:01+07:00, 2008:06:19 20:30:34-07:00, 2008:06:24 10:41:26+08:00, 2008:06:26 06:05:12-07:00, 2008:07:02 13:59:06-07:00, 2008:07:21 17:59:44+05:30, 2008:08:01 16:42:45+07:00, 2008:08:01 16:48:13+07:00, 2008:08:01 16:48:23+07:00, 2012:12:24 09:44:45+08:00, 2013:07:24 08:38:26+08:00, 2016:07:28 10:13:59+08:00 History Software Agent : Adobe Illustrator CS4, Adobe Illustrator CS4, Adobe Illustrator CS4, Adobe Illustrator CS4, Adobe Illustrator CS4, Adobe Illustrator CS4, Adobe Illustrator CS4, Adobe Illustrator CS4, Adobe Illustrator CS4, Adobe Illustrator CS4, Adobe Illustrator CS4, Adobe Illustrator CS4, Adobe Illustrator CS4, Adobe Illustrator CS4, Adobe Illustrator CS4, Adobe Illustrator CS4, Adobe Illustrator CS4, Adobe Illustrator CS4, Adobe Illustrator CS4, Adobe Illustrator CS4, Adobe Illustrator CS4, Adobe Illustrator CS4, Adobe Illustrator CS4, Adobe Illustrator CS4, Adobe Illustrator CS4, Adobe Illustrator CS4, Adobe Illustrator CS4, Adobe Illustrator CS4, Adobe Illustrator CS4, Adobe Illustrator CS4, Adobe Illustrator CS4, Adobe Illustrator CS4, Adobe Illustrator CS4, Adobe Illustrator CS4, Adobe Illustrator CS4, Adobe Illustrator CS4, Adobe Illustrator CS4 History Changed : /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, / History Params : from application/vnd.adobe.illustrator to application/vnd.adobe.illustrator Startup Profile : Print Has Visible Overprint : False Has Visible Transparency : False N Pages : 1 Max Page Size W : 13.999990 Max Page Size H : 9.999838 Max Page Size Unit : Centimeters Font Name : BankGothicBT-Light, Arial-BoldMT, Arial-ItalicMT, ArialMT, Arial-Black, AvantGarde-Book-Bold, Calibri-Bold, BankGothicBT-Medium, 3Of9Barcode, Futura, Myriad-Roman, Wingdings2, Swiss911BT-ExtraCompressed Font Family : BankGothic Lt BT, Arial, Arial, Arial, Arial, AvantGarde-Book Bold, Calibri, BankGothic Md BT, 3 of 9 Barcode, Futura, Myriad, Wingdings 2, Swiss911 XCm BT Font Face : Light, Bold, Italic, Regular, Black, Bold, Bold, Medium, Regular, Regular, Roman, Regular, Regular Font Type : TrueType, Open Type, Open Type, Open Type, Open Type, TrueType, Open Type, TrueType, TrueType, TrueType, Type 1, Open Type, TrueType Font Version : mfgpctt-v1.52 Tuesday, January 26, 1993 3:00:13 pm (EST), Version 6.88, Version 6.88, Version 6.88, Version 5.21, Version 5.88, mfgpctt-v1.52 Monday, January 25, 1993 2:11:37 pm (EST), 1.0 Wed Nov 15 18:50:28 1995, Futura 4.2 08/06/99, 001.001, Version 1.55, mfgpctt-v4.4 Dec 29 1998 Font Composite : False, False, False, False, False, False, False, False, False, False, False, False, False Font File Name : Bank Gothic Light BT.ttf, arialbd.ttf, ariali.ttf, arial.ttf, ariblk.ttf, AvantGarde-Book Bold.ttf, calibrib.ttf, Bank Gothic Medium BT.ttf, 3OF9_NEW_0.TTF, FUTURA.TTF, wmr_____.pfb; wmr_____.pfm, WINGDNG2.TTF, Swiss 911 Extra Compressed BT.ttf Plate Names : Cyan, Magenta, Yellow, Black Swatch Groups Group Name : 鮮豔 Swatch Groups Group Type : 1 Swatch Groups Colorants Swatch Name: C=60 M=90 Y=0 K=0 Swatch Groups Colorants Mode : CMYK Swatch Groups Colorants Type : PROCESS Swatch Groups Colorants Cyan : 60.000002 Swatch Groups Colorants Magenta : 90.000004 Swatch Groups Colorants Yellow : 0.003099 Swatch Groups Colorants Black : 0.003099 Producer : Adobe PDF library 9.00 Page Count : 16 Creator : Adobe Illustrator CS4EXIF Metadata provided by EXIF.tools