Marson Technology Co MT6337BT BT Barcode Scanner User Manual Users manual3
Marson Technology Co Ltd BT Barcode Scanner Users manual3
Contents
- 1. Users manual1
- 2. Users manual2
- 3. Users manual3
Users manual3
%8/(7227+02'(/
%OXH7RRWKVHWWLQJ SLQFRGHDQGGLVFRQQHFWLRQ
Č Č
Č Č
Č Č
Č Č
Č Č
Č Č
Č Č
Ë
ĘĽ
" #" # !
" #" # !
# #" # !
$SSHQGL[
%$5&2'(7(67&+$57
'(16,7<
1$552:
PP PLO
:,'(
PP PLO
&+$5*$3
PP PLO
1:
5$7,2
0(',80
'(16,7<
"
(+%*'%#,%$
)&
!
$SSHQGL[
%$5&2'(7(67&+$57
This equipment has been tested and found to comply with the
limits for a class B digital device, pursuant to part 15 of the FCC
rules. These limits are designed to provide to provide reasonable
protection against harmful interference in a residential installation.
This equipment generates, uses and can radiate radio frequency
energy and, if not installed and used in accordance with the
installation. , May cause harmful interference to radio
communication. However, there is no guarantee that interference
Will not occur in a particular installation. if this equipment does
cause harmful interference to radio or television reception, which
can be determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one or more of the
following measures:
-Reorient or relocate the receiving antenna
-Increase the separation between the equipment and receiver
-Connect the equipment into an outlet on a circuit different from
that to which the receiver is connected
-Consult the dealer or an experienced radio / TV technician for help
You are cautioned that changes or modifications not expressly
approved by the party responsible for compliance could void your
authority to operate the equipment. This device complies with part
the
FCC rules.
Operation
is subject to the following two
15 ofRF
FCC
radiation
exposure
statement:
1.conditions
this transmitter must not be co-located or operating in conjunction
(1) This
deviceantenna
may notorcause
harmful. interference and
with
any other
transmitter
Thisequipment
device must
acceptwith
any interference
received,
including
2.(2)this
complies
FCC RF radiation
exposure
limits set
interference
that
may
cause
undesired
operation
forth for an uncontrolled environment . this device was tested for typical
devices without
co-location
conditiondirectly
(the transmitting
lapmobile
held operations
with the
device contacted
to the human body
antenna
is
installed
or
located
more
than
20cm
from the
to the back side of the Bluetooth barcode scanner.away
to maintain
body of user and near by person)
compliance with fcc rf exposure compliance requirements. Avoid direct
FCC RF radiation exposure statement:
contact to the transmitting antenna during transmitting.
1. This transmitter must not be co-located or operating in
conjunction with any other antenna or transmitter.
2. This equipment complies with FCC RF radiation exposure limits
set forth for an uncontrolled environment. This equipment should
be installed and operated with a minimum distance of 20
centimeters between the radiator and your body.
Industry Canada - Class B
This digital apparatus does not exceed the Class B limits for
radio noise emissions
from digital apparatus as set out in the interference-causing
equipment standard
entitled âDigital Apparatus,â ICES-003 of Industry Canada.
Cet appareil numĂŠrique respecte les limites de bruits
radioĂŠlectriques applicables
aux appareils numĂŠriques de Classe B prescrites dans la norme
sur le matĂŠrial
brouilleur: âAppareils NumĂŠriques,â NMB-003 ĂŠdictĂŠe par
lâIndustrie.
(1) this device may not cause interference,and (2) this device
must accept any
interference, including interference that may cause undesired
operation of the device."
This equipment has been tested and found to comply with the limits for a class B
digital device, pursuant to part 15 of the FCC rules. These limits are designed to
provide to provide reasonable protection against harmful interference in a residential
installation. This equipment generates, uses and can radiate radio frequency energy
and, if not installed and used in accordance with the installation. , May cause harmful
interference to radio communication. However, there is no guarantee that interference
Will not occur in a particular installation. if this equipment does cause harmful
interference to radio or television reception, which can be determined by turning the
equipment off and on, the user is encouraged to try to correct the interference by one
or more of the following measures:
-Reorient or relocate the receiving antenna
-Increase the separation between the equipment and receiver
-Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected
-Consult the dealer or an experienced radio / TV technician for help
You are cautioned that changes or modifications not expressly approved by the party
responsible for compliance could void your authority to operate the equipment.
FCC RF radiation exposure statement:
1. This transmitter must not be co-located or operating in conjunction with any other
antenna or transmitter.
2. This equipment complies with FCC RF radiation exposure limits set forth for an
uncontrolled environment. This equipment should be installed and operated with
a minimum distance of 20 centimeters between the radiator and your body.
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.4 Linearized : No Modify Date : 2007:11:13 11:32:33+08:00 Create Date : 2007:11:13 11:32:25+08:00 Producer : Acrobat Distiller 5.0.5 (Windows) Page Count : 17 Mod Date : 2007:11:13 11:32:33+08:00 Creation Date : 2007:11:13 11:32:25+08:00 Metadata Date : 2007:11:13 11:32:33+08:00 Has XFA : NoEXIF Metadata provided by EXIF.tools