Matrix MPWBLK Black Ops User Manual

Matrix Industries, Inc. Black Ops

User Manual

1. Hold MODE and SET for one second. The bars around the display rise and fall depending on how much heat you provide. Put your PowerWatch on a friend’s wrist, observe as the bars rise, then thank them for donating their calories to charge your battery!MODE buttonSCROLL knobSET buttonMATRIX POWERWATCHThe SmartWatch Powered by You!PAIR WITH YOUR SMARTPHONE OPTIMAL CHARGING CONDITIONSREAL TIME ENERGY HARVESTINGTURN ON211. Download & launch iOS or Android app.2. From Welcome screen, press SET.Download the Matrix PowerWatch app for iOS or Android.POWER & BACKLIGHTPowerSave Mode: The PowerWatch measures your steps and activity. After about 45 minutes of inactivity, the PowerWatch will automatically enter PowerSave mode and turn o the screen. If fully charged, your settings should be saved for one year or more. When the PowerWatch detects activity, it will turn on again. Keeping the PowerWatch Charged:  The PowerWatch charges whenever you wear it.  It charges even faster on the inside of your wrist.Turn On Backlight: Hold MODE for two seconds.In order charge its internal battery, the MATRIX PowerWatch requires a temperature dierential with the ambient air. This means that it can generate more power when the air is cooler, and also when you are active and your skin is warmer. Here is a chart that shows how fast the PowerWatch will charge its internal battery at dierent air temperatures:SittingWalkingRunning60ºQuicklyVery quicklyVery quicklyAir TemperatureHow Fast the PowerWatch Charges70º SlowlyQuicklyVery quickly80ºNoSlowlyQuicklyAs you can see on the chart, the PowerWatch will charge its battery most quickly when you are active (walking or running), and when the ambient temperature is below 80°F. Above 90°F, the PowerWatch cannot charge its internal battery.
RUNNING MODE STOP WATCHSYNC DATA TO YOUR SMARTPHONESLEEP TRACKING MODE SUPPORTOur Frequently Asked Questions (FAQ) page is lled  with detailed instructions, tips and warranty information: https://store.powerwatch.com/pages/f-a-qThe Matrix PowerWatch does not need charging under normal use, which includes: adjusting the watch so it stays in direct contact with the user’s wrist; limiting  Bluetooth and backlight activity while the watch is worn on the user’s wrist; and not activating the watch  unnecessarily or repeatedly when it is not worn on the  user’s wrist. PowerWatch rmware can be updated through the app.One Year Satisfaction GuaranteeSee the FAQ and guarantee at  https://store.powerwatch.com/pages/f-a-q.For questions or problems, contact us at  support@matrixindustries.com. Thank you!1. Press MODE until Daily Activity screen appears.2. Turn SCROLL to read Steps, Calories and Sleep.The PowerWatch can track each run you take.1. Press MODE until Running Mode screen appears.2. Press SET to cycle through Start, Stop and Reset.1. Press MODE until Stop Watch screen appears.2. Press SET to cycle through Start, Stop and Reset1. While under the Watch Settings menu, SCROLL until the Mobile screen appears.2. Press SET to sync. Steps, Calories & Sleep are tracked automatically and reset each day. Results sync to iOS or Android app.See https://store.powerwatch.com/pages/f-a-q for more details. Display may update slowly, but Stop Watch result is accurate.See https://store.powerwatch.com/pages/f-a-q for more details.1. Press SET until Sleeping Now screen appears while in the real time power screen.2. Press and hold SET when you wake up.TRACK ACTIVITY1 1 1 112 2 2 22REGULATORY STATEMENTThis device complies with Part 15 of the FCC Rules. Operation is subject to the following two  conditions: (1) this device may not cause harmful interference, and (2) this device must accept  any interference received, including interference that may cause undesired operation.WARNING: Changes or modifications not expressly approved by the manufacturer responsible  for compliance could void the user’s authority to operate the equipment.NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates,  uses and can radiate radio frequency energy and, if not installed and used in accordance with  the instructions, may cause harmful interference to radio communications.However, there is no guarantee that interference will not occur in a particular installation.  If this equipment does cause harmful interference to radio or television reception, which can  be determined by turning the equipment off and on, the user is encouraged to try to correct  the interference by one or more of the following measures:• Reorient or relocate the receiving antenna. • Increase the separation between the equipment and receiver. • Connect the equipment into an outlet on a circuit different from that to which the receiver  is connected. • Consult the dealer or an experienced radio/TV technician for help.EUROPE (EU)1.Safety: a) Rated Voltage:3.8V DC,                   460mA b) Model Name: PowerWatch ; Black Ops c)  d) Manufacturer’s name: Matrix Industries Inc e) Manufacturer name & address: Matrix Industries Inc. 1455 Adams Drive, Suite 1190 Menlo Park, CA 94025 USA f) CANADAThis device complies with Industry Canada’s licence-exempt RSSs. Operation is subject to the  following two conditions: (1) This device may not cause interference, and (2) This device must accept any interference, including interference that may cause undesired operation of the device.JAPAN CHINA2. RF & EMC • Frequency band(s) = 2402-2480MHz  • Maximum radio frequency power transmitted in the frequency band(s) = -14dBm or 0.04mW • Declaration of Conformity Inserts • Hereby, Matrix Industries Inc, declares that the radio equipment type is in compliance with Directive 2014/53/EU. The declaration of  conformity may be consulted at  www.powerwatch.com/declaration.pdf • This equipment may be operated in:Manufacturer’s name: Matrix Industries Inc. FCC ID: 2ANY2MPWBLK FCC ID: 2ANY2MPW01

Navigation menu