User Manual
| Download: |  |
| Mirror Download [FCC.gov] | |
| Document ID | 3843858 |
| Application ID | irBIybu7trB6M1Bdvd2JnA== |
| Document Description | User Manual |
| Short Term Confidential | No |
| Permanent Confidential | No |
| Supercede | No |
| Document Type | User Manual |
| Display Format | Adobe Acrobat PDF - pdf |
| Filesize | 83.9kB (1048731 bits) |
| Date Submitted | 2018-05-08 00:00:00 |
| Date Available | 2018-05-08 00:00:00 |
| Creation Date | 2018-03-22 11:30:54 |
| Producing Software | Adobe PDF Library 15.0 |
| Document Lastmod | 2018-03-22 11:30:55 |
| Document Title | User Manual |
| Document Creator | Adobe InDesign CC 13.1 (Macintosh) |
MATRIX POWERWATCH TURN ON PAIR WITH YOUR SMARTPHONE REAL TIME ENERGY HARVESTING OPTIMAL CHARGING CONDITIONS In order charge its internal battery, the MATRIX PowerWatch requires a temperature differential with the ambient air. This means that it can generate more power when the air is cooler, and also when you are active and your skin is warmer. Here is a chart that shows how fast the PowerWatch will charge its internal battery at different air temperatures: MODE button SCROLL knob How Fast the PowerWatch Charges SET button 1. Hold MODE and SET for one second. 1. Download & launch iOS or Android app. 2. From Welcome screen, press SET. The SmartWatch Powered by You! Download the Matrix PowerWatch app for iOS or Android. 60º The bars around the display rise and fall depending on how much heat you provide. Put your PowerWatch on a friend’s wrist, observe as the bars rise, then thank them for donating their calories to charge your battery! Air Temperature 70º 80º Sitting Quickly Slowly No Walking Very quickly Quickly Slowly Running Very quickly Very quickly Quickly POWER & BACKLIGHT As you can see on the chart, the PowerWatch will charge its battery most quickly when you are active (walking or running), and when the ambient temperature is below 80°F. Above 90°F, the PowerWatch cannot charge its internal battery. PowerSave Mode: The PowerWatch measures your steps and activity. After about 45 minutes of inactivity, the PowerWatch will automatically enter PowerSave mode and turn off the screen. If fully charged, your settings should be saved for one year or more. When the PowerWatch detects activity, it will turn on again. Keeping the PowerWatch Charged: The PowerWatch charges whenever you wear it. It charges even faster on the inside of your wrist. Turn On Backlight: Hold MODE for two seconds. TRACK ACTIVITY RUNNING MODE SYNC DATA TO YOUR SMARTPHONE STOP WATCH SLEEP TRACKING MODE SUPPORT REGULATORY STATEMENT EUROPE (EU) Our Frequently Asked Questions (FAQ) page is filled with detailed instructions, tips and warranty information: https://store.powerwatch.com/pages/f-a-q This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. 1.Safety: a) Rated Voltage:3.8V DC, 460mA b) Model Name: PowerWatch ; Black Ops c) The Matrix PowerWatch does not need charging under normal use, which includes: adjusting the watch so it stays in direct contact with the user’s wrist; limiting Bluetooth and backlight activity while the watch is worn on the user’s wrist; and not activating the watch unnecessarily or repeatedly when it is not worn on the user’s wrist. PowerWatch firmware can be updated through the app. One Year Satisfaction Guarantee 1. Press MODE until Daily Activity screen appears. The PowerWatch can track each run you take. 2. Turn SCROLL to read Steps, Calories and Sleep. 1. Press MODE until Running Mode screen appears. 2. Press SET to cycle through Start, Stop and Reset. 1. While under the Watch Settings menu, SCROLL until the Mobile screen appears. 2. Press SET to sync. 1. Press MODE until Stop Watch screen appears. 2. Press SET to cycle through Start, Stop and Reset 1. Press SET until Sleeping Now screen appears while in the real time power screen. See the FAQ and guarantee at https://store.powerwatch.com/pages/f-a-q. 2. Press and hold SET when you wake up. For questions or problems, contact us at support@matrixindustries.com. Thank you! WARNING: Changes or modifications not expressly approved by the manufacturer responsible for compliance could void the user’s authority to operate the equipment. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: • Reorient or relocate the receiving antenna. • Increase the separation between the equipment and receiver. • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. • Consult the dealer or an experienced radio/TV technician for help. Manufacturer’s name: Matrix Industries Inc. Steps, Calories & Sleep are tracked automatically and reset each day. Results sync to iOS or Android app. See https://store.powerwatch.com/pages/f-a-q for more details. See https://store.powerwatch.com/pages/f-a-q for more details. Display may update slowly, but Stop Watch result is accurate. FCC ID: 2ANY2MPWBLK FCC ID: 2ANY2MPW01 d) Manufacturer’s name: Matrix Industries Inc e) Manufacturer name & address: Matrix Industries Inc. 1455 Adams Drive, Suite 1190 Menlo Park, CA 94025 USA f) 2. RF & EMC • Frequency band(s) = 2402-2480MHz • Maximum radio frequency power transmitted in the frequency band(s) = -14dBm or 0.04mW • Declaration of Conformity Inserts • Hereby, Matrix Industries Inc, declares that the radio equipment type is in compliance with Directive 2014/53/EU. The declaration of conformity may be consulted at www.powerwatch.com/declaration.pdf • This equipment may be operated in: CANADA This device complies with Industry Canada’s licence-exempt RSSs. Operation is subject to the following two conditions: (1) This device may not cause interference, and (2) This device must accept any interference, including interference that may cause undesired operation of the device. JAPAN CHINA
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.4 Linearized : Yes Language : en-US XMP Toolkit : Adobe XMP Core 5.6-c143 79.161424, 2017/09/22-11:52:47 Create Date : 2018:03:22 11:30:54-07:00 Metadata Date : 2018:03:22 11:30:55-07:00 Modify Date : 2018:03:22 11:30:55-07:00 Creator Tool : Adobe InDesign CC 13.1 (Macintosh) Instance ID : uuid:ba4e7eb4-1f08-a546-a6ee-2366cf3e7df2 Original Document ID : xmp.did:cbfad5e2-a464-46fc-854c-4b46d2415276 Document ID : xmp.id:3b025902-9327-40dd-96b8-e9c06dbe61bc Rendition Class : proof:pdf Derived From Instance ID : xmp.iid:7ad1433b-1c58-47c6-ac9b-799928d67553 Derived From Document ID : xmp.did:a0f41ad9-1f0c-4756-9b51-7b9831015f59 Derived From Original Document ID: xmp.did:cbfad5e2-a464-46fc-854c-4b46d2415276 Derived From Rendition Class : default History Action : converted History Parameters : from application/x-indesign to application/pdf History Software Agent : Adobe InDesign CC 13.1 (Macintosh) History Changed : / History When : 2018:03:22 11:30:54-07:00 Format : application/pdf Producer : Adobe PDF Library 15.0 Trapped : False Page Count : 2 Creator : Adobe InDesign CC 13.1 (Macintosh)EXIF Metadata provided by EXIF.tools