Matsushita Cf W4Gwczz Users Manual

CF-W4GWCZZ to the manual b3004a2f-a979-4c52-aa8a-2e94dd86a00f

2015-02-09

: Matsushita Matsushita-Cf-W4Gwczz-Users-Manual-553883 matsushita-cf-w4gwczz-users-manual-553883 matsushita pdf

Open the PDF directly: View PDF PDF.
Page Count: 68

DownloadMatsushita Matsushita-Cf-W4Gwczz-Users-Manual-  Matsushita-cf-w4gwczz-users-manual
Open PDF In BrowserView PDF
ORDER NO. CPD0511051C1

Personal Computer

CF-W4
This is the Service Manual for
the following areas.
M …for U.S.A. and Canada

Model No. CF-W4GWCZZ 1 2
1: Operation System
B: Microsoft® Windows® XP Professional
2: Area
M: Refer to above area table

© 2005 Matsushita Electric Industrial Co., Ltd. All rights reserved.
Unauthorized copying and distribution is a violation of law.

LASER SAFETY INFORMATION
For U.S.A
Class 1 LASER-Product
This product is certified to comply with DHHS Rules 21 CFR Subchapter J.
This product complies with European Standard EN60825 (or IEC Publication 825)
For all areas
This equipment is classified as a class 1 level LASER product and there is no hazardous LASER radiation.
Caution:
(1) Use of controls or adjustments or performance of procedures other than those specified herein may result
in hazardous radiation exposure.
(2) The drive is designed to be incorporated into a computer-based system or unit which has an enclosing
cover. It should never be used as a stand alone drive.
Danger:
The serviceman should not remove the cover of drive unit and should not service because the drive unit is a
non-serviceable part.
Please check DANGER label on bottom cabinet of the equipment.
. Unplug the AC power cord and remove the battery pack from the equipment before opening the top cover of
the drive.
. When the power switch it on, do not place your eyes close to the top cover to look into the interior of the unit.
LASER Specification
Class 1 level LASER Product
Wave Length:
DVD
650
CD
778

660 nm
787 nm

Laser safety information is appropriate only when drive with laser is installed.

Handling

A

B

This computer has been designed so as to minimize shock to the LCD and hard disk drive, etc.,
but no warranty is provided against such trouble. Therefore, as a precision instrument, be
extremely careful in the handling.
Do not carry the computer while the display is open, or carry it by gripping the display or the
cabinet around the display (see figure A). When closing the display, ensure that the latch is
positioned correctly in the slot .
Do not carry your computer when the power is on.
Do not drop or hit your computer against solid objects.
Remove all external devices, cables, PC Cards sticking out of the computer (see figure B),
SD memory cards, and MultiMedia Cards before transporting the computer.
We recommend preparing a fully charged battery pack.
When transporting a spare battery pack inside a package, briefcase, etc., it is recommended
that it be placed in a plastic bag so that its contacts are protected.
Always carry your computer with you. Never check it in with luggage. For use of the computer inside an aircraft, we recommend asking the airlines regarding their policy on this issue.
It is a good idea to make backup copies on disks and carry them with you.

Maintenance

Touch Pad

Display
Avoid using water when cleaning the panel. Ingredients included in water may leave scratches
and reduce readability of the screen.

Avoid rubbing off dust/dirt with cloth since it may leave scratch on the screen.
Sweep dust/dirt with fine brush, then wipe it with a dry soft cloth used for cleaning glasses.

Apply camera lens cleaner on a soft gauze and clean it with gentle force. Then, wipe with a
dry soft cloth used for cleaning glasses.

Areas excluding the display
Wipe these areas with a soft cloth, after applying water or detergent diluted with water to the
soft cloth and firmly wringing out excess water.

CAUTION
Do not use benzene, thinner, or rubbing alcohol. Doing so may adversely affect the
surface, e.g., discoloration. In addition, do not use commercially-available household
cleaners and cosmetics, as they may contain components harmful to the surface.
Do not directly add or spray water or detergent. If liquid enters the inside of the
computer, it may cause it to work improperly or be damaged.

1 Connection Diagram
Connection by Cable

Connection Cable
1
Drive FFC
2
LCD Cable
3
Speaker Cable
4
SW Board FFC
5
Antenna PCB-L
6
Antenna PCB-R
7
Modem Cable
8
LAN Cable
9
PAD FFC
10 HDD FPC Unit
11 DC-IN Cable
12 Main-Sub Cable

Direct connection Connectors
Parts on Bottom Side

DFJK9000ZA
DFJS957ZA
DFJS962ZA
DFJE20T108BB
N1ZYYY000002
N1ZYYY000001
DFJS959ZB
DFJS979ZA
DFJE12U112BB
DL3UP1443AAA
DFJS961ZB
DFJS960ZA

Antenna Board
(R)
2

LCD

6

LCD Back Light
3

Wireless
LAN Module

Battery Pack

Keyboard

Speaker

5
Antenna Board
(L)

Inverter Board

CN601
CN26

VGA

CN10

CN15
Main Board

CN11
CN12

HDD

10
CN4

CN600

CN2

11

CN19

DC-IN

MODEM

7

12

CN18

CN23

CN902 USB

CN901
USB Board
CN903 USB

CN25

CN13

1
SD Card

CD-RW,DVD-ROM Drive

CN14

CN16

CN3
CN21

PCMCIA
SLOT
SW6
POWER SW

JK2

JK1

Headphone

Mic

4
SW Board

CN951

SW 7
W-LAN ON/OFF
Lithium Battery
9

DIMM memory
(Option)
CF-BAV0256U
CF-BAV0512U

8
LAN
Touch Pad

1-1

SW951
Open SW

2 Disassembly instructions
2.1.

Disassembly Flow Chart

Main Unit
9.2.1.
Preparation
1. End the Windows.
2. Turn off the Power, and then remove the AC Adaptor or Battery Pack.
3. Remove any optional DIMM Memory Cards or PCMCIA Cards.
4. Remove any other peripherals or Connected Devices.
9.2.2.

9.2.3.
HDD

Keyboard
9.2.4.
Top Case

9.2.5.

9.2.7.

SW Board

9.2.9.
Speaker

Touch Pad

9.2.6.

9.2.8.

Disk Cover

9.2.14.
Antenna Board
(L, R) / DC-IN

9.2.13.

Drive Unit

Main Board

9.2.15.

USB Board

9.2.16.

W-LAN Module

Solenoid

LCD Knob

9.2.12.

9.2.11.

9.2.10.

MODEM

9.2.17.
Card Bus ejector

Main replaceable parts
9.2.1.

Display Unit
9.2.18.
LCD Unit

9.2.2.
9.2.3.

9.2.19.
Hinge Cover

9.2.4.
9.2.5.

LCD Unit / LCD Rear

9.2.6.
9.2.7.

9.2.20.

9.2.21.
Inverter Board

9.2.8.
9.2.9.

Battery Pack
DIMM Cover
Side Cover
Keyboard
HDD
HDD FFC
HDD Cover
Top Case
SW Board
Disk Cover Open Knob
Disk Cover
Touch Pad
Touch Pad Knob
Touch Pad Ring
PAD FFC
LCD Knob
Speaker

2-1

9.2.10.
9.2.11.
9.2.12.
9.2.13.
9.2.14.
9.2.15.
9.2.16.
9.2.17.
9.2.18.
9.2.19.
9.2.20.

9.2.21.

Solenoid
Main Board
Drive Unit
USB Board
Antenna Board
Antenna Cover(L, R)
W - LAN Module
Heat Spreader
MODEM
Card Bus ejector
LCD Unit
Hinge Cover
Hinge (L, R)
LCD Unit
LCD Rear
LCD Front
Inverter Board
LCD Cable

2.2.

Disassembly

2.2.1.

5. Open the Keyboard from LCD side and then turn it inside
out on the Top Case.

Preparation

Attention:
Before disassembly, be sure to perform the following steps.

LCD unit

Hook (B)

1. End the Windows.
2. Turn off the power and then remove the AC Adaptor.
3. Slide the Hooks (A) and then remove the Battery Pack.
4. Remove the Screw (A) and then remove the DIMM cover.
(Remove if the DIMM memory is equipped with)
Screw(A):XSB2+4FNL(N16)
Battery Pack
Hook (A)

Hook (B)

LCD Knob

6. Remove the Heat Spreader from buttom of the Keyboard.
7. Remove the Keyboard FFC from the Connector (CN15),
(CN26) and then remove the Keyboard.
Screw (A)

Heat Spreader

DIMM cover

2.2.2.

CN26

Remove the Keyboard
Keyboard

Preparation : perform the section 2.2.1. first.
1. Remove the 4 Screws (F).
Screw(F):DXQT2+E12FNL(N11)
2. Remove the Keyboard Hook Plate and then remove the
Hook of back side of Keyboard with small screwdriver.
Screw (F)
Screw (F)
Screw (F)

CN15

Keyboard Hook Plate

3. The LCD unit is opened up to about 90° by operating the
LCD Knob.
4. Remove the 6 Hooks (B).

2-2

2.2.3.

Remove the HDD

2.2.4.

Preparation : perform the section 2.2.1. 2.2.2. first.

Remove the Top Case

Preparation : perform the section 2.2.1. , 2.2.2. first.

1. Remove the 2 Screws (V).

1. Insert a small screwdriver into the hole and slide the look in
the direction shown by arrow (C) to open the Disc Cover.

Screw(V):DFHE5025XA(N1)

2. The Anttena Cover (R) is rotated from the Bottom Case side
in the direction of arrow (A) and the Antenna Cover (R)
removed in the direction of arrow (B).

2. The slide is done in the direction of the arrow and the HDD
Cover is removed.
Screw (V)

LCD unit
Antenna cover (R)

HDD Cover

B
A

3. Lift up the HDD Unit and remove the FFC Connector and
then remove the HDD Unit.

C

4. HDD is taken out of the HDD Case.
Note:
Please do not bend pins of the HDD Connector, at the
time of removing HDD and FFC Connector.

Back Side

HDD Case
HDD

Small
screwdriver

Hole

FFC Connector
HDD FFC
HDD Unit

3. Remove the 3 Screws (B), 2 Screws (C) and 3 Screws (E)
from the Bottom Case.
Screw(B):DRHM0092ZA(N4)
Screw(C):DXHM0057ZA(N7)
Screw(E):DXHM0039ZA(N6)
Screw (B) Screw (E)
Screw (B)
Screw (E)

Screw (E)

Screw (B)

Screw (C)

Screw (C)

2-3

4. Remove the 3 Screws (I), 2 Screws (J), 2 Screws (K) and 2
Screws (L) from the Top Case.
Screw(I):DXQT2+E6FNL(N13)

2.2.5.

Preparation : perform the section 2.2.1. to 2.2.3. first.
1. Peel off the Tape.

Screw(J):DXQT26+D8FCL(N16)

2. Remove the Solenoid Cable.

Screw(K):DXQT2+E6FCL(N12)

3. Remove the 1 Screw (Q) and then remove the SW Board.

Screw(L):DFHE5025XA(N1)
Screw (J)

Remove the SW Board

Screw(Q):DXHM0057ZA

Disc Cover

Note:
Note it that the Disc Eject Knob comes off at the same
time.

Screw (K) Screw (K)
Screw (I)

Screw
(J)
Screw
(I)

Tape
Screw (Q)

Switch Board

Screw (L)
Screw (L)

Screw (I)

Disc Eject Knob

5. Lift up the Top Case, remove the Pad FFC and then
remove the Top Case.
Solenoid Cable

Top Case

FFC (PAD)

FFC (SW)

2-4

Top Case

2.2.6.

Remove the Disc Cover

Preparation : perform the section 2.2.1. to 2.2.3. first.

2.2.7.

Remove the Touch Pad

Preparation : perform the section 2.2.1. to 2.2.3. first.

1. Remove the 2 Screw (R), 1 Screw (S) and 1 Screw (T) of
the Disk Angle.

1. Peel off the Tape.
2. The 6 Hooks of the Pad Cover are depressed in the
direction of the center of the Touch Pad by using the small
screwdriver.

Screw(R):DXQT2+E12FNL(N11)
Screw(S):DXQT2+E6FNL(N13)
Screw(T):DXHM0057(N7)

Tape

2. Slide the Disc Cover to the Disc Cover Shaft and remove
the Cover.
3. The Disk Cover Shaft is pulled out while sliding and
removed it from the Disk Angle in the direction of the Touch
Pad.

Hook

Top Case

Hook

Disc Cover
Screw (R) Screw (S)

Disk Cover Shaft

Hook
Screw (R)
Disc Cover Spring

PAD FFC
Hook

Screw (T)
Disk Angle

3. Remove the Hooks of the Toutch Pad and the Pad Button,
and remove the Touch Pad.

Top Case

Pad Cover
Touch Pad
Pad bottun

Hook (F)

Hook (F)

2-5

2.2.8.

Remove the LCD Knob

Preparation : perform the section 2.2.1. to 2.2.3. first.

2.2.10.

Remove the Solenoid

Preparation : perform the section 2.2.1. to 2.2.3. first.

1. Remove the Spring from the Top Case.

1. Remove the 1 Screw (Z) and then remove the Solenoid.

2. Remove the Hook of LCD Knob from the Stopper Rib of the
Top Case and then the LCD Knob is removed.

Screw(Z):DXQT2+F2FNL(N14)
Screw

Stopper Rib

Top Case

Latch
Spring

Solenoid

2.2.11.

LCD Knob
Location of the Spring

Remove the Main Board

Preparation : perform the section 2.2.1. to 2.2.3. first.
1. Remove the 1 Screw (D), (H) and 2 screws.

2.2.9.

Remove the Speaker

Screw(D):DXQT2+E10FNL(N10)
Screw(H):DXQT2+D4FNL(N9)

Preparation : perform the section 2.2.1. to 2.2.3. first.
1. Peel off the Speaker Box Sheet.

Screw(G):DFHE5035ZB(N2)

2. Peel off the tape on the Speaker and Speaker Ring and
then remove the Speaker.

Screw(W):K1YE50000022(N500)

Speaker Box Sheet
Speaker

Screw (G)
Screw (W)

Speaker
Ring

Screw (D)

Top Case

Screw (H)

2. Remove the 2 Screws (N).
Screw(N):DXQT2+E6FNL(N13)
3. Remove the Connector (CN23)

2-6

4. The Antenna Cover (L) is inclined in the direction of arrow
A and remove it.

6. Remove the DC-IN Jack Holder.

Remove the Antenna Cover (L) from the Top Case.

DC Jack
Holder

Antenna Cover (L)

A

Antenna PCB (L)
Screw (N)
Screw (N)

Main Board

Bottom Case

7. Returns the Main Board on the reverse.
Peel the Tape of the Drive FFC and remove the FFC.
Main Board

Bottom Case

8. Remove the Connector (CN3) and the Connector (CN16) of
LAN Cable.

CN23

Peel off the Tape of HDD FFC and remove the FFC.

5. Remove the Connectors (CN10) and (CN11) of LCD Cable.

Remove the Main Board.
Tape
LCD Cable
CN10
CN11

LAN
cable
Lithium Battery
Cable

2-7

CN3
CN16

Tape

2.2.12.

Remove the Drive Unit

Preparation : perform the section 2.2.1. to 2.2.3. first.

2.2.14.

Remove the Antenna Board(L,R)

Preparation : perform the section 2.2.1. to 2.2.10. first.

1. Peel off the Tape from the Connector.

1. Remove the Antenna Cable (L, R) on the Wireless LAN
Module and then remove the Antenna Board from the
Bottom Case.

2. Remove the Drive FFC from the Connector (CN501) and
remove out the Drive Unit.

2. Remove the DC-IN Cable (CN600) from the Main Board.
Tape

CN501

Antenna Cable (R)

Antenna PCB (L)

Antenna Cable (L)

CN600

Drive unit

2.2.13.

Drive FFC

Remove the USB Board

Preparation : perform the section 2.2.1. to 2.2.3. first.
1. Remove the Connector (CN23) on the Main Board.
2. Remove the USB Board from the Bottom Case.

Bottom Case

2.2.15.

DC - IN Cable

Remove the Wireless LAN Module

Preparation : perform the section 2.2.1. to 2.2.3. and 2.2.10.
first.
1. Peel off the Tape on the Wireless LAN Module.
2. Open the Wireless LAN Module maintenance arm and
remove the Wireless LAN Module.

CN23
USB Cable

Tape
Wireless LAN
Module

USB Board

Main Board

2-8

2.2.16.

Remove the MODEM

2.2.17.

Preparation : perform the section 2.2.1. to 2.2.3. and 2.2.10.
first.

Remove the Card Bus Ejector

Preparation : perform the section 2.2.1. to 2.2.3. and 2.2.10.
first.

1. Remove the 2 Screws (O).

1. Remove the 1 Screw (P) from connected side of Main
Board.

Screw(O):DXQT2+D25FNL(N8)

Screw(P):DFHE5025XA(N1)

2. Remove the MODEM to the vertical direction from
Connector (CN8) on the Main Board.

Screw (P)
Screw (O) Screw (O)

MODEM

CN18

Main Board

2. Return it on the revers to Card Bus Ejector side.
3. Remove the 2 hooks (C) of the Card Bus Ejector from the
Connector (CN14) and the Card Bus Ejector is removed.

Card Bus Ejector

Hook(C)
Main Board

CN14

2-9

2.2.18.

Remove the LCD Unit

2.2.20.

Preparation : perform the section 2.2.1. to 2.2.3. first.
1. Remove the 2 Screws (M)

Remove the LCD Unit and the LCD
Rear

Preparation : perform the section 2.2.1. to 2.2.3. and 2.2.18.
to 2.2.19. first.

Screw(M):DXQT26+D5FNL(N15)

1. Remove the 2 Screws (Y).

2. Remove the LCD Cable from the Connectors (CN10) and
(CN11) on the Main Board and then remove the LCD Unit.

Screw(Y):DRHM0074ZA(N3)

Screw (M)

LCD Unit
Screw (Y)

LCD Cable
Screw (M)
CN10
CN11

Screw (Y)

2. The LCD Front Case and the combination parts of LCD
Rear Case are separated.
(Combination parts are 6 the top and bottom places for
each, 4 right and left places for each)
3. Remove the Hinge (L, R).

Bottom Case

Hook Position

2.2.19.

Remove the Hinge Cover

LCD Unit

Preparation : perform the section 2.2.1. to 2.2.3. and 2.2.18.
first.
1. Remove the 2 Screws(U) and the Hinge Cover(L,R).

Hinge (L)

Screw(U):DRHM0074ZA(N3)
LCD Front Case

LCD Unit
LCD Rear Case

Screw (U)

Hinge Cover (L)

Screw (U)
Hinge Cover (R)

2-10

Hinge (R)

2.2.21.

Remove the Inverter Board

Preparation : perform the section 2.2.1. to 2.2.4. and 2.2.17.
to 2.2.19. first.
1. Remove the LCD Cable from the Inverter.
2. Peel off the Tape for fixation from Inverter Case.
3. Remove the Inverter with the Inverter Case.

LCD Front Case
LCD Hook
LCD High voltage
2pin Wire Rod

Inverter Box
Tape
Gasket Cloth
LCD Cable

2-11

3 Reassembly instructions
3.1.

Attention when CF-W4G series is repaired

· Please execute writing BIOS ID when you exchange the Main Board.
· Parts (Sheet and rubber) etc. related various the Conductive Cloth and Heat Spreader cannot be recycled. Use new parts.

3.2.

Assembly knowhow of part LCD
LCD Rubber, LCD side Rubber and LCD backing Rubber’s putting
LCD Rubber (Upper)
LCD Rubber (Upper
big

small LCD Front Case

LCD parallel after putting
LCD Side Rubber
LCD Back Rubber (Lower)

LCD Front Case

LCD Cable processing
Clamping processing of LCD Cable, LCD Connector connection and putting of PET Tape of cable
The LCD Insulation Sheet is peeled off and after processes as shown in the figure below,
1 2mm
Put the Insulation Sheet.
PET Tape

1

2mm

LCD Insulation Sheet

Connector

LCD Frame Clamp

A red line of the cable is matched to the LCD Frame externals.

0

1mm

Putting of The Conductive Cloth
The Conductive Cloth is put and after putting, a both side tape is put.
Process the part in the signal line of the LCD Cable in the Conductive Cloth.
Put the Conductive Cloth on the connector surely.

Connector of externals match
There must not be beginning to see from externals.

Connector
Both Side Tape

LCD Insulation Seat

3-1

Insulation seat of edge match
0 1mm
Conductive Cloth
(LCD Label)

LCD Cable

Putting of PET Sheet
The cable must not run aground on the damper.
Along the LCD Module and put the LCD Cable (Inverter part) with the PET Tape.
PET Tape
Conductive Cloth (LCD cable)

LCD Cable
(Inverter part)
LCD Cable

Damper

Putting of Rear Damper
Conductive Cloth (LCD cable)

LCD Cable

Rib application putting of LCD Front Case
0 1mm
Externals suiting of Inverter Case
0 1mm

Rear Damper

Processing of Inverter Cable

The cable must not come in succession.
Inverter Cable

The cable must not run aground on the cushion.

Putting of Gasket (LCD)
Put on Hinge (R) surely.
The line of the remainder
is put on Hinge (R) side.

Gasket (LCD)

Externals suiting of reflector
0 1mm

Hinge (R)

Put the reflector part surely.

3-2

Putting of LCD Damper(C)

LCD Damper(C)
Plinth externals match
0 1mm
Rib application putting of LCD Front Case
0 1mm

Rib application putting of LCD Front Case
0 1mm

Rib edge match of LCD Front Case
0 1mm

Drawing out specification of LCD Cable

Putting of Conductive Cloth of LCD Cable

LCD Cable (Inverter)

75

5mm

Conductive Cloth is wrapped
(Leave the half)

The Cable is processed under the shaft .
Note:It is confirmed that the cable does not narrow
between cabinets.

LCD Cable processing 2

LCD cable processing 1
Process the LCD Cable (2) such as DC-IN Jack Holders,
after process the Conductive Cloth of the LCD cable puts
as shown in the figure below.

0

Processing cable to under point
hanging part
Processing the cable to
the DC-IN Jack Holder
The cable is processed
to the ditch

1mm
0

1mm

Put the Conductive Cloth

Connector connection specification

The order of connecting connector
Inverter Cable LCD Cable

DC-IN Jack Holder

3-3

3.3.

Assembly of Brake Lever
Brake Lever completion chart
Brake Spring
Brake Lever
Brake Pad

Do not touch the bonding side when the brake pad is affixed.

Brake Lever built-in figure
Surface chart

In the slide and then install.
Brake lever preparation goods

The above is

shape.

The back chart
Be sure not to do the slide with struck the rib.

3-4

3.4.

Solenoid Wire Rod processing

Inserts between ribs
Up that there is no screw hole

Inserts under the rib

Solenoid Cable

Disk Cover Lock

Solenoid with cable
The Solenoid with the cable is made
on the Disk Cover Lock

3.5.

Switch Board assembly specification
Connection to SW Board

Affixation of PET Tape
SW Board FFC

SW Board FFC

Fold as valley type

Terminal Side
Suiting with
shape of board
0 1mm

SW Board

Central suiting
with the pin
0 1mm

Suiting with shape of case
0 1mm

Tape

Pin

Screw
Disk Eject Knob
To confirms that the Lever of the switch has been
surely inserted in the ditch of the knob

3.6.

Speaker installation and Line processing
Soldering of Speaker Cable

Affixation of Speaker Ring
Put it according to the shape of the rib.
Note not running aground in the rib.
Speaker Ring

Speaker

Soldering
Red Line

Soldering
Rib

Black Line

Speaker Cable
Rib

3-5

Speaker installation

Processing of Speaker Cable

Secure 2mm or more for the space in each rib
and the soldering part.
Rib
Rib

Rib outside suiting
0 1mm

Speaker Box
Rib outside suiting
0 1mm

Soldering Part

Inserts in latch

2mm or more

Inserts in the table side.

Rib

2mm or more
Rib

3.7.

Inserts in ditch

Inserts in Ditch

Assembly of Antenna Board Part
Line processing of Antenna Cable (L)
Install the Antenna Board in the Bottom Case.
And process remainder of the Antenna Cable as shown in the figure below.
Boss
Process the cable
with the boss between ribs.
Install DC Jack in bottom

Antenna Cable (L)

Place between the bottom base
and install.

Process the cable to the ditch
of the Bottom Case.
Bottom Case
The terminal must become
straight below.

Antenna Cable (L)

The upper side is close with
the under latch is hooked
the Bottom Case
Antenna Cover(L)
DC Jack Holder

The under latch is hooked
the Bottom Case

3-6

The under latch is hooked
the Bottom Case

3.8.

MODEM Cable, Rib and LAN Cable processing
Conductive Cloth affixation of Modem Cable
Modem Cable

Wrap Gasket Cloth.
1 3mm

Gasket Cloth
Tape is wrapped

Tape
Standard size
8mm

0
Process under
the pin.
Do not get on up.
Process the remainder
between the pin and the pin.
Process at the
right of the pin.
Do not get on up.

1mm

Process the cable so as not to
come in succession.
Peel off the both sides tape
flaking off paper and then
fix to the cover.
Touch the pin.
MODEM
Pin
Pin

Touch the pin.

Shut the cap.
PET
Tape

Process the cable to
the cutting lack part.

LAN

Process between the
Main Board and the Pin.
and do LAN Cable up.
(Prevent from floating by Modem Cable.)

Process the Modem Cable to
the cutting lack of the Board.

Install connector in bottom.

PET
Tape

Pin

Draw out RJ cable
straight.

Divide the cable into the center
and paste the tape vertically.
Paste the remainder to an opposite side.

Main Board
LAN Cable
Modem Cable

3-7

3.9.

USB Cable processing
Process between the pin and the pin.

Process between the boss and the HDD.

Boss
Pin

USB Board

USB Cable

Process between the pin
and the Main Board.

Fix the substrate
with two pins.

HDD FFC

Put the cable when there is no space
between the Main Board and the cable
in the Main Board.

Process the USB cable on the Drive Board.
Do not multiply the stress by the Drive Board.
USB Cable

Drive

Main Board

Open space between the Drive Board and the cable.

3.10. Wire Rod processing of Lithium Battery
Paste to round shape of the Bottom Case.
Draw out the cable straight.

0

3mm

Tape

Boss

0

2mm

Process the Antenna Cable between the Lithium Battery and the Boss.

3-8

3.11. Affixation of HDD Gasket
HDD

HDD Case

0

1mm

Insertion

Gasket
Affixes in the corner of concave part.
Do not run aground on difference.

3-9

0

1mm

3.12. Assembly of Disk Cover
Assembly of Disk Cover
Installation of PAD Cover Ring

Installation of Disk Cover Shaft

Disc Cover
Pin 2

Arm spring for
Disk Cover

Pin 1

Convex part
Latch

Insert under
the Hook

Disk Cover Shaft

Convex part

PAD Cover Ring
Insert two Convex parts in the hole of Disc Cover.
Hang two latch on Disc Cover.

Insert the Arm Spring for the Disk Cover in the Disk Cover.
Insert pin 1 of the Disk Cover Shaft through the
inside diameter of the Spring.
Pin 2 of the Disk Cover Shaft must be slided,
and insert in the hole of the Disk Cover.

Installation of various dampers on Disk Angle
Prevention rubber with disk wound
is pasted.
Paste the remainder internally. Disk Angle
(The other side is also the same.)
0
Prevention rubber 0
with disk wound

1mm

Tape for Keyboard/
Seat 2 is pasted.
0

LCD Cushion is pasted.

Disk Angle

1mm

0

1mm

0

1mm

0 1mm
0

1mm

1mm

0

0
2
1mm

0 1mm

1mm

Tape for Keyboard

LCD Cushion

LCD Cushion

Installation of Disk Cover
Disk Angle

Insert the hook in the corner hole.

Suit a round hole.

Disk Cover Shaft
Arrange Disk Cover Shaft Z bend
part at the left of the bend
of the Disk Angle.

Do the Disk Cover in the slide.
Arrange Disk Cover Shaft Z bend part under the bend of the Disk Angle.
Insert the latch of The Disk Angle in the corner hole of the Disk Cover Shaft and slide of the Disk Cover in the direction of the arrow. 3-10 3.13. Assembly of Touch Pad Insertion of PAD FFC Installation of Pad Button Affixation of PAD Sheet Top Case Gasket (PAD) PAD FFC Pin insertion PAD Button Touch Pad PAD Seat The Concave part is inserted in the hole of a Top Case Affixes it according to the inside concave part edge side Installation of Pad Cover Affixation of Touch Pad Pressurizing Affixes it according to the convex positioned part Pad Cover Hook Convex part Hook Insert two places in the convex part in the ditch of a Top Case and hang Hooks four places. Touch Pad 3.14. Screw tightening procedure of each unit When serving, the screw tightening is executed according to the undermentioned procedure. 1. Screw tightening of Top Case 1-1. DXQT2+E6FNL(I:N13) is tightened. No.1 to No.3 1-2. DFHE5025XA(L:N1) is tightened. No.4 to No.6 1-3. DXQT2+E6FCL(LK:N12) is tightened. No.7, No.8 1-4. DXQT26+D8FCL(J:N16) is tightened. No.9, No.10 Screw (J) Screw (K) Screw (I) Screw (K) Screw (I) Screw (J) A Screw (L) Screw (L) Screw (L) Screw (I) Conclude coloring part A pressing when you conclude 3-11 Screw (K). 2. Installation of Keyboard 1.The Keyboard is surely installed in the Hook (2 places) at the right and the Hook (4 places) behind a Top Case . 2.The Keyboard is held and the Keyboard Hook is inserted and locked. Note:Never touch the edge part of the Keyboard Hook by bare-handed. 3.It is confirmed that the Keyboard Hook do not run aground in the rib. Screw tightening of Keyboard Hook Keyboard Do not run aground on the rib (Refer to the figure below) Hook Hook OK Keyboard Hook plate Keyboard Hook plate Top Case Keyboard Hook plate 3. Screw tightening of Bottom Case 1.The screw tightening is done in the undermentioned order. 3-1. DXHM0039ZA(E:N6) is tightened.No.1 to No.3 3-2. DXHM0057ZA(C:N7) is tightened. No.4,No.5 3-3. DXQT2+E12FNL(F:N11) is tightened. No.6 to No.9 3-4. DXQT2+E10FNL(D:N10) is tightened. No.10 3-5. DXQT2+D4FNL(H:N9) is tightened. No.11 3-6. DRHM0092ZA(B:N4) is tightened. No.12 to No.14 Screw (E) Screw (B) Screw (B) Screw (F) Screw (F) Screw (F) Screw (E) Screw (F) Screw (E) Screw (B) Screw (C) Screw (D) Screw (H) Screw (C) 3-12 NG 3.15. Specification of affixation of PET tape to Heat Spreader The extent that length remains pastes on an opposite side. Heat Radiation Grease(G-751) Spread with a treatment device. Heat Spreader 1~2mm The extent that length remains pastes on an opposite side. PET Tape PET Tape 1~2mm Never touch the aluminum edge part directly by bare-handed when the part of aluminum with a thin all surroundings bends. Correct in that case with a radio pincers etc. and instal. 3.16. Affixation of Win Logo Label (XP), CENTRINO Label and ENERTGY STAR Label Win Logo Label (XP) 2 5mm CENTRINO Label 2 0 In Win Logo Label / CENTRINO Label / ENERGY STAR Label Affixation inclination, the both ends difference is within 0.2mm. 3-13 5 1mm 7mm 2 5mm ENERGY STAR Label 5mm Exploded View Display Section K8 N3 K88 K81 N15 K5 K39 K63 K22 N15 K6 K51 K45 K51 K18 K51 K39 E26 K39 K63 K37 K51 K52 K38 K19 K53 K23 K38 E24 K42 K52 K39 K92 K36 K30 K33 K30 K37 N3 K33 K12 K85 N3 K64 K99 K51 E5 K82 Screw tightening torque N3 Cabinet Section E27 K525 K10 K111 K511 K119 K523 K9 K89 K523 K507 K17 K508 E2 K106 E28 K1 K50 N13 PET Tape N16 K35 K35 K500 K94 K504 N1 K20 K114 K502 K49 K35 K69 K112 K505 K97 K506 K35 N12 K503 N1 N12 K520 N13 N11 N7 N11 K91 N8 K41 N16 K506 K506 K90 N14 K59 K519 E23 N1 K7 K60 K522 K501 K123 K61 K16 N13 K44 K74 K4 K76 K76 a E10 K101 K46 K113 E25 K115 a K116 K117 E3 E13 K93 N7 SW951 N13 Screw tightening torque Bottom Section N8 Screw tightening torque K105 E22 E29 K100 N8 K96 K108 K102 K509 N13 CN12 CN13 CN14 CN601 CN22 E11 SW6 SW7 SW5 K43 JK1 E18 JK2 K98 K49 K510 K34 K110 K109 K107 N5 E4 K32 N1 K79 E19 A3 K27 E9 K24 K104 E14 K524 K515 N500 K86-2 N2 N11 E6 K515 K513 K517 E7 N7 N9 K515 E8 N6 K2 K86-1 K86-3 K86-2 CN902 K3 CN903 K86-1 K86 N4 K86-1 N11 N10 E12 K512 N11 K11 K84 N7 N6 N6 N17 N4 K518 K29 N1 N1 E1 N11 K516 K521 N4 E16 K514 E20 K80 E21 K40 Replacement Parts List Note: Important Safety Notice Components identified by mark have special characteristics important for safety. When replacing any of these components, use only manufacturer's specified parts. CF-W4GWCZZBM REF.NO. and AREA Main Block Unit E1 E2 E3 E4 E5 E6 E7 E8 E9 E10 E11 E12 E13 E14 E16 E18 E19 E20 E21 E22 E23 E24 E25 E26 E27 E28 E29 Accessories A1 A2 A3 A4 A500 Packing Material P1 P2 P3 P5 P6 P7 P8 Mechanical Parts K1 K2 K3 K4 K5 K6 K7 K8 K9 PART NO. DESCRIPTION Q'TY CR-2032/K5A DFJK12U112BB DFJK20T108BB DFJK9000ZA DFJS957ZA DFJS979ZA DFJS959ZB DFJS960ZA DFJS961ZB DFJS962ZA DL3U11436MAB DL3U21436MAB DL3UP1492KAA N1ZYYY000002 N1ZYYY000001 N5HZC0000014 UJDA769PD1-A DL3UP1443AAA N3CABRD00011 K1YYZZ000060 L0AA01A00018 L5EDD3Q00023 L9AAA5DB0010 N0GB1J000012 N2AZZJ000038 N2EAYYY00001 N5HAZ0000012 COIN BATTERY PAD FFC SW PCB FFC DRIVE FFC LCD CABLE LAN CABLE MODEM CABLE MAIN SUB CABLE DC-IN CABLE SP CABLE PCB, MAIN PCB, USB PCB, SW ANTENNA PCB-L ASSY ANTENNA PCB-R ASSY WIRELESS LAN MODULE CD-R/RW, DVD-ROM DRIVE FPC, HDD HDD CONNECTOR SPEAKER LCD SOLENOID INVERTER KEY BOARD US TOUCH PAD MODEM CF-AA1623AM6 K2CG3DR00003 N4HULTA00009 DFQX5574ZA DFJS954ZA AC ADAPTOR AC CABLE LITHIUM ION BATTERY PACK MANUAL MODEM CABLE 1 1 1 1 1 DFPE0806ZA DFPE0812ZA DFPE0819ZA DFPK1037ZA DFPK1180YA DFPN0827ZA DFPN0828ZA HOLDER PAD W BATTERY SPACER ACCESSORIES BOX PACKING CASE (EXPORT) CUSHION T CUSHION B 1 1 1 1 1 2 2 DFBC0314ZB-0 DFBD0180ZB-0 DFBD0182ZA-0 DFBD9006ZA-0 DFBH3043ZA DFBH3044ZA DFBS0068ZC-0 DFGB0089VB-0 DFGE0106ZB-0 PAD BUTTON POWER KNOB LAN SW KNOB DISK EJECT KNOB ASSY HINGE-L USA HINGE-R USA LCD KNOB PANASONIC LABEL PAD COVER 1 1 1 1 1 1 1 1 1 RTL RTL RTL 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 K10 K11 K12 K16 K17 K18 K19 K20 K22 K23 K24 K27 K29 K30 K32 K33 K34 K35 K36 K37 K38 K39 K40 K41 K42 K43 K44 K45 K46 K49 K50 K51 K52 K53 K59 K60 K61 K63 K64 K69 K74 K76 K79 K80 K81 K82 K84 K85 K86 K86-1 K86-2 K86-3 K88 K89 K90 K91 K92 K93 K94 K96 DFGE0107ZB-0 DFGT1028ZA DFGX0397ZA-0 DFHE0215ZA DFHE0416ZA DFHE0436ZA DFHE0843ZA DFHE0844ZA DFHE0943ZA DFHE0945ZA DFHE0953ZA DFHE0957ZA DFHG1471YA DFHG1546ZB-0 DFHG1744ZA DFHG1766ZA-0 DFHG1767ZA-0 DFHG1768YA-0 DFHG1771ZA DFHG1772ZA DFHG1773ZA DFHG1774ZA DFHG1808ZA DFHG1778ZA DFHG1779WA DFHG1786ZA DFHG1787ZA DFHG1797ZA DFHG1800ZA DFHP7106YA DFHP7221YA DFHP7208YA DFHP7209ZA DFHP7210ZA DFHR3A37ZA DFHR3A38ZA DFHR3A71YA DFHR3A78ZA DFHR3A95ZA DFHR3B19ZA DFHR3B53ZA DFHR6188ZA DFKE0772ZA-0 DFKE0773ZA-0 DFKE0774ZA-0 DFKE0775ZA-0 DFKE0815ZA-0 DFKF0255ZB-0 DFKF8165ZA-0 DFHG371ZA-1 DFKL0026ZA-0 DFMX1174ZA DFKM0482ZA-0 DFKM0483UA-0 DFKM8170VA-0 DFKE0817ZA DFMD1189XA DFMD1190YA DFMD2165ZA DFMD3121ZA PAD COVER RING BOTTOM SHEET USA LCD BATT RUBBER SHEET TAPE (KBD) CLOTH LCD CABLE 1 LCD MAGNET GASKET PAD GASKET CLOTH (LCD CABLE) GASKET CLOTH (LCD) SHEET GASKET CLOTH LCD METAL DAMPER B LCD RUBBER M-PCI CUSHION LCD SIDE RUBBER DC JACK HOLDER DISK COVER CUSHION LCD DAMPER A LCD DAMPER B LCD DAMPER C LCD SIDE DAMPER HDD CASE ASSY W4 USA PCMCIA STOPPER CUSHION LCD HOOK CUSHION CPU CUSHION MINI-PCI CUSHION REAR DAMPER BATT CUSHION(W4) BOTH SIDES TAPE PAD SHEET LCD FRONT TAPE A LCD FRONT TAPE B LCD FRONT TAPE C SPEAKER RING SPEAKER BOX DISK EJECT KNOB SHEET LCD INSULATOR INVERTER TAPE HINGE BACKUP SHEET T4 DISK KNOB SHEET DISK LOCK BUSH ANTENNA COVER-L ANTENNA COVER-R HINGE COVER L HINGE COVER R DIMM COVER LIGHT LCD FRONT BOTTOM CASE USA ASSY FOOT RUBBER FOOT RUBBER BACK AUDIO JACK SHEET LCD REAR (SANKI) DISK COVER (TOUGH COMBO) TOP CASE ASSY DISK ANGLE MG LCD HOOK DISK COVER LOCK DISK CV SHAFT ANGLE MDC PLATE 1 1 1 1 2 1 1 1 1 1 1 1 1 2 1 2 1 4 1 2 2 4 1 1 1 1 1 1 1 2 1 5 2 1 1 1 1 2 1 1 1 2 1 1 1 1 1 1 1 3 2 1 1 1 1 1 1 1 1 1 K97 K98 K99 K100 K101 K102 K104 K105 K106 K107 K108 K109 K110 K111 K112 K113 K114 K115 K116 K117 K119 K123 K500 K501 K502 K503 K504 K505 K506 K507 K508 K509 K510 K511 K512 K513 K514 K515 K516 K517 K518 K519 K520 K521 K522 K523 K524 K525 N1 N2 N3 N4 N5 N6 N7 N8 N9 N10 N11 N12 DFMD4057ZA DFMX0635ZB DFMX1155ZA DFMX1156ZA DFMX1158ZA DFMX1160ZA DFMX1184ZA DFMY0399ZA DFMY3191YA DFMY3192ZA DFMY3206ZA DFMY3207ZA DFMY3208ZA DFQT9950ZA DFQT9948ZA DFUD0037ZA DFUN0078ZB JDBC0044ZA JDBG0032ZA JDKJ0059ZA DFHP7180ZA DFUD0040ZA DFHR3C40ZA DFHR3C14ZA DFHR3C36ZA DFHR3C37ZA DFHR3C38ZA DFMD7A63ZA DFHG1833ZA DFHP7226ZA DFHR3C39ZA DFHR3C33ZA DFHR3B86ZA DFQT9675ZA DFKE0781ZA-0 DFHP7228ZA DFHG1835ZA DFHR3C13ZA DFHR3C19ZA DFHR3C24ZA DFKE0770ZA-0 DFHG1834ZA DFHP7231ZA DFHR3B99ZA DFHR3C12ZA DFHR3C18ZA DFHR3C54ZA DFMY0421ZA DFHE5025XA DFHE5035ZB DRHM0074ZA DRHM0092ZA DRQT2+G6FKL DXHM0039ZA DXHM0057ZA DXQT2+D25FNL DXQT2+D4FNL DXQT2+E10FNL DXQT2+E12FNL DXQT2+E6FCL KB HOOK F999 SHEET INVERTER BOX MAIN PW SHEET1 DVD PWB SHEET PCMCIA-MAIN SHEET SW CABLE SHEET MCH RUBBER HEAT SPREADER TOP HEAT SPREADER BOTTOM MEMORY SHEET TOP MEMORY SHEET BOTTOM WLAN SHEET WINDOWS XP LABEL (FOR NOTE) CENTRINO LABEL DISK KNOB SPRING DISK COVER ARM SPRING BREAK SPRING BREAK PAD BREAK LEVER LCD TAPE E LATCH SPRING DISK COVER SHEET LCD KNOB SPACER DISK ANGLE SHEET A DISK ANGLE SHEET B DISK ANGLE SHEET C DISK ANGLE FPC COVER DISK ANGLE CUSHION KB FPC TAPE KB SHEET LCD CABLE FIX SHEET DVD HEAT INSULATION PACK ENERGY STAR LABEL RJ DUST COVER RJ DUST COVER FIX TAPE HDD DAMPER RJ CABLE SHEET HDD FPC EDGE SHEET USB CABLE FIX SHEET HDD COVER SP CABLE FIX CUSHION KBD TAPE RJ CABLE BLIND SHEET SP CABLE SHEET KB EDGE SHEET HINGE BACKUP SHEET HEAT SHEET KB LARGE SCREW SCREW SCREW SCREW SCREW SCREW SCREW SCREW SCREW SCREW SCREW SCREW 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 2 1 1 1 1 3 1 1 1 1 1 1 1 1 4 1 1 1 1 1 1 1 2 1 1 6 2 4 3 1 3 4 6 1 1 6 2 N13 N14 N15 N16 N17 N500 DXQT2+E6FNL DXQT2+F2FNL DXQT26+D5FNL DXQT26+D8FCL XSB2+4FNL K1YE50000022 SCREW SCREW SCREW SCREW SCREW SCREW, I/O PIN 6 1 2 2 1 2 Replacement Parts List Note: Important Safety Notice Components identified by mark have special characteristics important for safety. When replacing any of these components use only manufacturer's specified parts. CF-W4GWCZZBM REF. NO and AREA MAIN PCB C 2 PART NO. DESCRIPTION Q'TY F1J0J106A024 CAPACITOR, 6.3V, 10µF 40 EEFCD0D151ER CAPACITOR, 2V, 150µF 2 C 3 C 4 C 6 C 7 C 8 C 11 C 12 C 13 C 15 C 16 C 17 C 19 C 20 C 21 C 23 C 24 C 25 C 26 C 29 C 30 C 31 C 32 C 34 C 35 C 36 C 37 C 40 C 41 C 42 C 43 C 45 C 46 C 47 C 48 C 63 C 66 C 67 C 100 C 103 C 5 C 688 C 9 C 10 C 14 C 18 C 22 C 27 C 33 C 38 C 39 C 44 C 60 C 61 C 69 C 71 C 72 C 73 C 78 C 79 C 80 C 82 C 83 C 86 C 91 C 92 C 101 C 104 C 110 C 113 C 115 C 116 C 119 C 120 C 121 C 122 C 125 C 126 C 127 C 128 C 131 C 132 C 134 C 135 C 138 C 139 C 142 C 143 C 144 C 152 C 153 F1G1C104A042 CAPACITOR, 16V, 0.1µF 169 C 154 C 155 C 161 C 162 C 163 C 164 C 165 C 166 C 167 C 171 C 187 C 194 C 195 C 196 C 197 C 200 C 202 C 203 C 206 C 207 C 210 C 211 C 213 C 214 C 215 C 217 C 220 C 221 C 222 C 223 C 228 C 229 C 230 C 231 C 232 C 233 C 234 C 235 C 236 C 237 C 239 C 241 C 242 C 246 C 247 C 249 C 250 C 253 C 257 C 258 C 270 C 278 C 279 C 280 C 281 C 283 C 284 C 293 C 304 C 307 C 308 C 309 C 311 C 313 C 314 C 315 C 316 C 317 C 318 C 319 C 323 C 328 C 329 C 331 C 332 C 333 C 334 C 336 C 337 C 338 C 339 C 341 C 342 C 343 C 344 C 345 C 346 C 349 C 350 C 364 C 367 C 368 C 388 C 391 C 392 C 394 C 399 C 401 C 402 C 403 C 408 C 409 C 412 C 413 C 417 C 429 C 430 C 431 C 432 C 434 C 435 C 442 C 443 C 444 C 446 C 605 C 609 C 625 C 631 C 702 C 49 F1J0J1060004 CAPACITOR, 6.3V, 10µF 25 F1G1E103A062 CAPACITOR, 25V, 0.01µF 28 C 54 C 74 C 81 C 89 C 90 C 102 C 106 C 107 C 111 C 169 C 174 C 180 C 181 C 184 C 291 C 292 C 352 C 353 C 354 C 355 C 356 C 404 C 433 C 723 C 50 C 170 C 172 C 173 C 175 C 178 C 179 C 182 C 183 C 201 C 219 C 238 C 262 C 264 C 266 C 296 C 305 C 327 C 369 C 376 C 378 C 385 C 415 C 416 C 601 C 678 C 729 C 730 C 55 F1G1H222A450 CAPACITOR, 50V, 2200pF 1 C 56 F1G1A104A014 CAPACITOR, 10V, 0.1µF 3 F1H0J1050022 CAPACITOR, 6.3V, 1µF 6 F1G1H102A450 CAPACITOR, 50V, 1000pF 33 C 57 C 191 C 70 C 88 C 112 C 145 C 168 C 185 C 75 C 255 C 256 C 290 C 297 C 298 C 325 C 326 C 359 C 365 C 366 C 387 C 389 C 390 C 395 C 396 C 397 C 407 C 414 C 418 C 419 C 420 C 421 C 422 C 423 C 616 C 621 C 632 C 633 C 659 C 667 C 679 C 690 C 76 EEFUD0D331ER CAPACITOR, 2V, 330µF 4 EEFSX0D271ER CAPACITOR, 2V, 270µF 4 F1G1A474A018 CAPACITOR, 10V, 0.47µF 7 F1G0J224A001 CAPACITOR, 6.3V, 0.22µF 5 EEFCD0D101ER CAPACITOR, 2V, 100µF 4 EEFUD0E221ER CAPACITOR, 2.5V, 220µF 3 DCUM1A1051BD CAPACITOR, 10V, 1µF 26 C 77 C 84 C 85 C 87 C 648 C 649 C 650 C 93 C 94 C 95 C 97 C 98 C 99 C 254 C 96 C 109 C 300 C 301 C 360 C 105 C 652 C 686 C 696 C 108 C 212 C 218 C 114 C 117 C 118 C 123 C 124 C 129 C 130 C 133 C 136 C 137 C 156 C 157 C 158 C 159 C 192 C 198 C 199 C 204 C 248 C 310 C 400 C 427 C 606 C 635 C 703 C 706 C 140 F1G1H3R3A475 CAPACITOR, 50V, 3.3pF 2 F1G1H101A451 CAPACITOR, 50V, 100pF 10 F1G1H220A451 CAPACITOR, 50V, 22pF 8 F1G1H4R0A543 CAPACITOR, 50V, 4pF 2 F1G1H100A452 CAPACITOR, 50V, 10pF 8 F1G1H330A451 CAPACITOR, 50V, 33pF 7 C 141 C 147 C 294 C 295 C 299 C 393 C 607 C 636 C 637 C 638 C 680 C 176 C 177 C 611 C 647 C 660 C 664 C 683 C 725 C 190 C 193 C 259 C 260 C 261 C 263 C 265 C 267 C 268 C 269 C 271 C 272 C 273 C 274 C 275 C 276 C 277 C 285 ECJ2FF1A106Z CAPACITOR, 10V, 10µF 5 C 302 C 312 C 370 C 373 C 288 ERJ2GEJ103X RESISTOR, 1/16W, 10KΩ 1 C 320 F1G1H6R0A452 CAPACITOR, 50V, 6pF 2 C 324 F1L3D102A003 CAPACITOR, 2000V, 1000pF 1 C 347 F1J0J475A009 CAPACITOR, 6.3V, 4.7µF 6 F1G1H471A450 CAPACITOR, 50V, 470pF 2 F1H1A105A030 CAPACITOR, 10V, 1µF 4 C 358 F1J1A1050021 CAPACITOR, 10V, 1µF 1 C 363 F1J0J106A016 CAPACITOR, 6.3V, 10µF 6 F1G1C473A004 CAPACITOR, 16V, 0.047µF 6 C 322 C 348 C 436 C 620 C 642 C 685 C 351 C 634 C 357 C 361 C 362 C 398 C 374 C 426 C 428 C 663 C 701 C 384 C 619 C 627 C 629 C 630 C 670 C 386 F1G1A683A014 CAPACITOR, 10V, 0.068µF 1 C 405 F1G1H470A451 CAPACITOR, 50V, 47pF 2 F1G1H8R0A452 CAPACITOR, 50V, 8pF 2 C 600 F1H1H104A731 CAPACITOR, 50V, 0.1µF 1 C 602 F1G1H221A495 CAPACITOR, 50V, 220pF 7 C 406 C 424 C 425 C 641 C 646 C 661 C 662 C 675 C 726 C 603 F1H1H103A748 CAPACITOR, 50V, 0.01µF 2 F1L1E106A021 CAPACITOR, 25V, 10µF 7 C 608 F1J1E105A009 CAPACITOR, 25V, 1µF 1 C 610 F1J1E104A081 CAPACITOR, 25V, 0.1µF 1 C 613 EEFUD0J101ER CAPACITOR, 6.3V, 100µF 2 F1H1H104A783 CAPACITOR, 50V, 0.1µF 16 F1K1E1060001 CAPACITOR, 25V, 10µF 7 EEFUD0G151ER CAPACITOR, 4V, 150µF 2 C 639 F1G1H681A450 CAPACITOR, 50V, 680pF 1 C 640 F1J1H334A533 CAPACITOR, 50V, 0.33µF 1 C 656 F1H1H182A009 CAPACITOR, 50V, 1800pF 2 C 674 F1H1H472A748 CAPACITOR, 50V, 4700pF 1 C 704 F1G1H152A450 CAPACITOR, 50V, 1500pF 1 C 654 C 604 C 614 C 623 C 671 C 687 C 693 C 714 C 676 C 615 C 617 C 622 C 655 C 658 C 665 C 682 C 684 C 691 C 700 C 705 C 708 C 709 C 712 C 724 C 727 C 618 C 644 C 645 C 653 C 672 C 716 C 717 C 624 C 673 C 668 CF 1 D4CC1103A038 THERMISTOR 1 CN 2 K1MMH2B00003 CONNECTOR 1 CN 3 K1KA02BA0014 CONNECTOR 2 CN 26 CN 4 K1MN45AA0044 CONNECTOR 1 CN 10 K1KA05BA0014 CONNECTOR 1 CN 11 K1KB30AA0049 CONNECTOR 1 CN 12 K1FB315BA003 CONNECTOR 1 CN 13 K1NA09E00027 CONNECTOR 1 CN 14 K1NA68E00096 CONNECTOR 1 CN 15 K1MY26BA0001 CONNECTOR 1 CN 16 K1KA08BA0014 CONNECTOR 1 CN 18 K1KB12A00099 CONNECTOR 1 CN 19 K1MMC4B00011 CONNECTOR 1 CN 21 K1MN12BA0134 CONNECTOR 1 CN 22 K1FY150BA007 CONNECTOR 1 CN 23 K1KA20BA0114 CONNECTOR 1 CN 25 K1MN60B00008 CONNECTOR 1 CN 600 K1KA02B00247 CONNECTOR 1 CN 601 K1KA10B00233 CONNECTOR 1 MA2J72900L DIODE 4 B0JDBE000002 DIODE 2 B0ADDH000004 DIODE 6 B3ABB0000164 DIODE 4 D 1 D 2 D 3 D 8 D 4 D 641 D 5 D 6 D 7 D 600 D 601 D 603 D 10 D 11 D 12 D 13 D 15 B3AKB0000008 DIODE 1 D 16 B3ACB0000020 DIODE 2 B0JCMD000014 DIODE 8 D 21 D 19 D 610 D 612 D 626 D 628 D 631 D 632 D 635 D 20 B3ABB0000196 DIODE 1 D 22 B0KB00000044 DIODE 2 D 602 MAZ81200ML DIODE 1 D 604 MAZ81800ML DIODE 1 D 605 B0JCCE000008 DIODE 3 D 23 D 624 D 630 D 606 MA3S132E0L DIODE 2 D 609 B0JCQD000001 DIODE 1 D 611 B0JDAE000004 DIODE 2 MAZ80510ML DIODE 6 D 616 MAZ80620ML DIODE 1 D 619 MA2S111-TX DIODE 2 D 622 D 627 D 613 D 614 D 615 D 617 D 618 D 640 D 621 D 620 B2ABAM000002 DIODE 1 D 625 DEDRB081L20 DIODE 1 D 629 B0JCPD000023 DIODE 3 K5H2021A0003 FUSE, 2A 2 D 642 D 643 F 2 F 3 IC 1 C2GBC0000263 IC, CPU 1 IC 2 C1DB00001476 IC, CHIP SET 1 IC 3 C1DB00001359 IC, CHIP SET 1 IC 4 C3ABSY000001 IC, MEMORY 8 IC 5 IC 6 IC 7 IC 8 IC 9 IC 10 IC 11 IC 12 C0JBAZ002423 IC, CLOCK GENERATOR 1 IC 14 C1ZBZ0002445 IC, PC-CARD SW 1 IC 15 C0CBCBG00008 IC, REGULATOR 1 IC 16 C1DB00001182 IC, LAN CONTROLLER 1 IC 17 C3EBCG000100 IC, EEPROM 1 IC 21 C0EBE0000460 IC 4 IC 24 C0EBH0000457 IC 1 IC 25 C0CBCBC00137 IC, REGULATOR 1 IC 26 C2CBJA000003 IC, MICON 1 IC 34 C0JBZZ000327 IC, THERMAL SENSOR 1 IC 36 C3FBLC000040 IC, FLASH MEMORY 1 IC 39 C0JBAB000619 IC, GATE LOGIC 1 IC 40 C0JBAA000344 IC, GATE LOGIC 5 IC 22 IC 23 IC 67 IC 50 IC 52 IC 77 IC 614 IC 41 C0JBAE000302 IC, LOGIC 3 C0JBAA000346 IC, LOGIC 4 IC 44 C1DB00001439 IC, CARDBUS CONTROL 1 IC 55 C0JBZZ000371 IC 2 C0DBZHG00043 IC, USB POWER CONTROL 2 IC 60 C1DB00001221 IC, USB-ATAPI LSI 1 IC 61 C1BB00001025 IC, AUDIO AMP 1 IC 62 C0ABBA000093 IC, OP AMP 2 C0JBAB000616 IC, LOGIC 3 IC 46 IC 49 IC 42 IC 43 IC 73 IC 74 IC 57 IC 56 IC 59 IC 601 IC 63 IC 70 IC 604 IC 64 C0CBCBC00181 IC 1 IC 65 C1BB00000868 IC, AC97 CODEC 1 IC 66 C3EBEC000061 IC, EEPROM 1 IC 69 C0CBCAC00183 IC, REGULATOR 1 IC 71 C0JBAZ002422 IC, FET SWITCH 1 IC 600 C0ABZA000047 IC, AMP 1 IC 602 C0DBALH00003 IC 4 IC 603 C0JBAD000182 IC, LOGIC 1 IC 605 C0DBAFH00029 IC 1 IC 608 C0DBEFH00002 IC, REGULATOR 1 IC 609 C0EBE0000333 IC 1 IC 613 C0DBDJH00009 IC, LINER 1 JK 1 K2HC103B0090 JK 2 G1C100Z00013 INDUCTOR 2 G1C1R0Z00002 INDUCTOR 6 L 6 G1C91NM00001 INDUCTOR 1 L 9 J0JJC0000015 INDUCTOR 1 IC 606 IC 607 IC 610 JK 2 L 1 L 2 L 3 L 4 L 5 L 7 L 8 L 55 L 10 J0JHC0000074 INDUCTOR 3 J0MAB0000169 INDUCTOR 2 DDB5Z024E-L INDUCTOR 2 J0JCC0000186 INDUCTOR 7 DDB5Z024C-L INDUCTOR 4 DDB5Z021C-Y INDUCTOR 6 L 600 DDB5Z028C-L INDUCTOR 1 L 601 DDAZS100MT3T INDUCTOR 2 L 603 G1C1R6Z00001 INDUCTOR 1 L 604 G1C4R7ZA0059 INDUCTOR 1 L 605 G1C220MA0077 INDUCTOR 1 L 607 G1C4R7MA0022 INDUCTOR 2 G1A160H00001 INDUCTOR 1 K5J1BB000001 POLY SW 2 UNR9214J0L TRANSISTOR 16 L 13 L 25 L 23 L 24 L 26 L 54 L 27 L 28 L 29 L 30 L 31 L 32 L 33 L 34 L 35 L 36 L 37 L 48 L 49 L 50 L 51 L 52 L 53 L 602 L 608 L 609 PS 1 PS 2 Q 1 Q 3 Q 7 Q 22 Q 27 Q 28 Q 32 Q 602 Q 608 Q 642 Q 647 Q 653 Q 654 Q 661 Q 662 Q 663 Q 4 B1DHDC000028 TRANSISTOR 9 B1CFGD000004 TRANSISTOR 7 XP0421300L TRANSISTOR 14 XP0421400L TRANSISTOR 3 Q 23 B1GFCFEN0003 TRANSISTOR 1 Q 24 DETA144EETL TRANSISTOR 3 Q 8 Q 10 Q 13 Q 17 Q 19 Q 624 Q 625 Q 668 Q 5 Q 6 Q 628 Q 630 Q 644 Q 648 Q 657 Q 9 Q 12 Q 14 Q 16 Q 29 Q 615 Q 617 Q 618 Q 621 Q 622 Q 623 Q 626 Q 671 Q 672 Q 20 Q 21 Q 600 Q 33 Q 664 Q 31 UNR9111J0L TRANSISTOR 1 Q 605 UNR9213J0L TRANSISTOR 4 B1DHFD000015 TRANSISTOR 2 B1CHRD000001 TRANSISTOR 2 B1DBGD000006 TRANSISTOR 6 Q 606 Q 620 Q 659 Q 607 Q 666 Q 609 Q 610 Q 611 Q 613 Q 632 Q 646 Q 655 Q 665 Q 614 B1MBEDA00017 TRANSISTOR 3 B1DHFB000003 TRANSISTOR 2 B1ABCF000023 TRANSISTOR 2 Q 633 B1DFGD000032 TRANSISTOR 1 Q 637 B1CFGD000003 TRANSISTOR 2 Q 645 B1DFED000020 TRANSISTOR 1 Q 650 B1MBEDA00018 TRANSISTOR 1 Q 674 B1CFMC000008 TRANSISTOR 1 R 1 ERJ2GEJ681X RESISTOR, 1/16W, 680Ω 2 ERJ2RKF27R4X RESISTOR, 1/16W, 27.4Ω 3 ERJ2GEJ151X RESISTOR, 1/16W, 150Ω 2 ERJ2RKF54R9X RESISTOR, 1/16W, 54.9Ω 6 R 5 ERJ2RKF39R2X RESISTOR, 1/16W, 39.2Ω 1 R 11 ERJ3GEY0R00V RESISTOR, 1/16W, 0Ω 5 ERJ2RKF2000X RESISTOR, 1/16W, 200Ω 2 ERJ2GEJ560X RESISTOR, 1/16W, 56Ω 6 ERJ3GEYJ100V RESISTOR, 1/16W, 10Ω 6 ERJ2RKF1001X RESISTOR, 1/16W, 1KΩ 1 Q 636 Q 638 Q 619 Q 667 Q 629 Q 631 Q 660 R 252 R 2 R 15 R 16 R 3 R 6 R 4 R 7 R 17 R 18 R 35 R 36 R 240 R 335 R 336 R 447 R 12 R 43 R 13 R 14 R 27 R 29 R 31 R 32 R 23 R 679 R 703 R 734 R 738 R 780 R 24 R 25 ERJ2RKF2001X RESISTOR, 1/16W, 2KΩ 1 R 26 ERJ2GEJ562X RESISTOR, 1/16W, 5.6KΩ 6 R 312 R 609 R 613 R 614 R 752 R 28 ERJ2GEJ750X RESISTOR, 1/16W, 75Ω 1 R 33 ERJ2RKF2210X RESISTOR, 1/16W, 221Ω 2 ERJ2RKF1000X RESISTOR, 1/16W, 100Ω 3 ERJ2RKF24R9X RESISTOR, 1/16W, 24.9Ω 4 ERJ2GE0R00X RESISTOR, 1/16W, 0Ω 65 R 39 R 34 R 40 R 42 R 37 R 38 R 66 R 232 R 41 R 114 R 115 R 116 R 117 R 118 R 119 R 120 R 121 R 122 R 123 R 124 R 125 R 126 R 127 R 128 R 129 R 130 R 131 R 132 R 133 R 134 R 135 R 136 R 137 R 138 R 139 R 145 R 147 R 162 R 167 R 169 R 224 R 229 R 235 R 236 R 245 R 246 R 289 R 297 R 330 R 355 R 356 R 366 R 377 R 379 R 383 R 384 R 417 R 432 R 434 R 436 R 439 R 442 R 443 R 477 R 478 R 479 R 480 R 604 R 689 R 693 R 694 R 784 R 786 R 47 ERJ2RKF80R6X RESISTOR, 1/16W, 80.6Ω 2 ERJ2GEJ103X RESISTOR, 1/16W, 10KΩ 62 R 48 R 49 R 190 R 191 R 193 R 198 R 220 R 221 R 225 R 230 R 233 R 241 R 243 R 247 R 279 R 293 R 294 R 302 R 307 R 308 R 315 R 321 R 322 R 324 R 325 R 342 R 353 R 381 R 382 R 386 R 387 R 399 R 400 R 408 R 412 R 419 R 420 R 421 R 423 R 445 R 446 R 454 R 457 R 459 R 463 R 471 R 616 R 684 R 697 R 698 R 705 R 710 R 711 R 717 R 719 R 722 R 728 R 730 R 731 R 746 R 747 R 776 R 781 R 50 R 51 R 280 R 281 ERJ2GEJ222X RESISTOR, 1/16W, 2.2KΩ 8 R 285 R 286 R 340 R 341 R 52 ERJ2GEJ101X RESISTOR, 1/16W, 100Ω 25 R 53 ERJ2RKF1002X RESISTOR, 1/16W, 10KΩ 1 R 54 ERJ2RKF75R0X RESISTOR, 1/16W, 75Ω 3 R 57 D1H82224A024 RESISTOR ARRAY 1 R 58 ERJ2RKF1501X RESISTOR, 1/16W, 1.5KΩ 2 ERJ2GEJ390X RESISTOR, 1/16W, 39Ω 2 R 65 ERJ2RKF2550X RESISTOR, 1/16W, 255Ω 1 R 67 ERJ6GEYJ100V RESISTOR, 1/10W, 10Ω 1 R 68 ERJ2GEJ201X RESISTOR, 1/16W, 200Ω 4 D1HG2208A001 RESISTOR ARRAY 8 R 203 R 226 R 228 R 242 R 259 R 288 R 290 R 309 R 319 R 362 R 365 R 401 R 402 R 418 R 449 R 617 R 618 R 651 R 652 R 653 R 654 R 655 R 656 R 788 R 55 R 56 R 462 R 63 R 64 R 70 R 72 R 74 R 80 R 81 R 82 R 83 R 108 R 109 R 110 R 111 R 84 ERJ2GEJ220X RESISTOR, 1/16W, 22Ω 27 D1HA56080001 RESISTOR ARRAY 7 ERJ2GEJ102X RESISTOR, 1/16W, 1KΩ 12 ERJ3GEYJ2R2V RESISTOR, 1/16W, 2.2Ω 2 R 85 R 86 R 87 R 88 R 89 R 90 R 91 R 92 R 93 R 94 R 95 R 96 R 97 R 98 R 99 R 100 R 101 R 102 R 103 R 104 R 105 R 106 R 107 R 350 R 351 R 444 R 112 R 113 R 140 R 141 R 142 R 143 R 144 R 149 R 150 R 151 R 152 R 267 R 300 R 339 R 354 R 425 R 474 R 475 R 677 R 153 R 176 R 154 ERJ2RKF49R9X RESISTOR, 1/16W, 49.9Ω 16 ERJ2GEJ120X RESISTOR, 1/16W, 12Ω 4 ERJ2GEJ330X RESISTOR, 1/16W, 33Ω 19 R 170 D1H83304A024 RESISTOR ARRAY 1 R 175 ERJ2RKF4750X RESISTOR, 1/16W, 475Ω 1 R 177 ERJ3GEYJ1R0V RESISTOR, 1/16W, 1Ω 3 ERJ2GEJ104X RESISTOR, 1/16W, 100KΩ 35 R 155 R 156 R 157 R 158 R 159 R 194 R 195 R 196 R 197 R 295 R 313 R 314 R 316 R 317 R 404 R 160 R 161 R 185 R 409 R 166 R 178 R 179 R 181 R 182 R 183 R 186 R 187 R 188 R 189 R 219 R 265 R 266 R 270 R 271 R 407 R 464 R 465 R 468 R 248 R 685 R 192 R 217 R 222 R 276 R 277 R 278 R 287 R 291 R 296 R 299 R 305 R 329 R 346 R 358 R 363 R 369 R 371 R 375 R 388 R 395 R 396 R 413 R 415 R 612 R 621 R 622 R 628 R 629 R 646 R 649 R 650 R 690 R 745 R 789 R 795 R 218 D1H81034A024 RESISTOR ARRAY 9 R 231 ERJ2RKF22R6X RESISTOR, 1/16W, 22.6Ω 1 R 237 ERJ2GEJ203X RESISTOR, 1/16W, 20KΩ 1 R 238 ERJ2GEJ106X RESISTOR, 1/16W, 10MΩ 1 R 239 ERJ2GEJ105X RESISTOR, 1/16W, 1MΩ 10 R 223 R 256 R 301 R 333 R 359 R 410 R 431 R 473 R 318 R 348 R 349 R 619 R 627 R 647 R 678 R 683 R 790 R 249 ERJ3GEYJ121V RESISTOR, 1/16W, 120Ω 2 DEARA8AJ103M RESISTOR ARRAY 6 ERJ2GEJ473X RESISTOR, 1/16W, 47KΩ 12 J0JAC0000021 FILTER 2 ERJ2GEJ472X RESISTOR, 1/16W, 4.7KΩ 6 ERJ2GEJ100X RESISTOR, 1/16W, 10Ω 15 R 311 ERJ2RHD562X RESISTOR, 1/16W, 5.6KΩ 1 R 331 ERJ2GEJ223X RESISTOR, 1/16W, 22KΩ 2 ERJ2GEJ153X RESISTOR, 1/16W, 15KΩ 6 R 250 R 253 R 254 R 255 R 304 R 389 R 458 R 258 R 261 R 263 R 264 R 303 R 344 R 368 R 448 R 623 R 661 R 687 R 773 R 268 R 269 R 272 R 441 R 451 R 472 R 686 R 756 R 298 R 663 R 664 R 701 R 702 R 706 R 707 R 714 R 715 R 723 R 727 R 732 R 736 R 777 R 778 R 657 R 338 R 440 R 704 R 716 R 739 R 775 R 306 ERJ2GEJ334X RESISTOR, 1/16W, 330KΩ 2 R 372 R 320 EXBV8V750JV RESISTOR ARRAY 1 R 323 ERJ2GEJ333X RESISTOR, 1/16W, 33KΩ 3 ERJ2GEJ363X RESISTOR, 1/16W, 36KΩ 3 ERJ2GEJ471X RESISTOR, 1/16W, 470Ω 2 R 334 R 343 R 326 R 327 R 328 R 347 R 397 R 380 ERJ2RKF3901X RESISTOR, 1/16W, 3.9KΩ 1 R 385 ERJ2RHD103X RESISTOR, 1/16W, 10KΩ 3 ERJ2GEJ561X RESISTOR, 1/16W, 560Ω 2 ERJ3GEYJ151V RESISTOR, 1/16W, 150Ω 2 R 394 ERJ2GEJ391X RESISTOR, 1/16W, 390Ω 1 R 398 ERJ2GEJ470X RESISTOR, 1/16W, 47Ω 2 ERJ6GEYJ101V RESISTOR, 1/10W, 100Ω 2 ERJ2RKF39R0X RESISTOR, 1/16W, 39Ω 2 R 456 ERJ2RKF2431X RESISTOR, 1/16W, 2.43KΩ 1 R 466 ERJ6GEY0R00V RESISTOR, 1/10W, 0KΩ 1 R 600 ERJ2RHD104X RESISTOR, 1/16W, 100KΩ 2 ERJ2RKD154X RESISTOR, 1/16W, 150KΩ 2 D1ZZ00000046 RESISTOR, 1W, 5mΩ 2 R 608 R 611 R 390 R 391 R 392 R 393 R 452 R 403 R 450 R 453 R 461 R 603 R 601 R 602 R 605 R 692 R 606 ERJ3GEYJ562V RESISTOR, 1/16W, 5.6KΩ 1 R 610 RL1220SR47F RESISTOR, 1/8W, 0.47Ω 1 R 615 ERJ2GEJ474X RESISTOR, 1/16W, 470KΩ 4 R 744 R 754 R 774 R 620 ERJ3GEYJ3R3V RESISTOR, 1/16W, 3.3Ω 1 R 624 RL1220SR15F RESISTOR, 1/8W, 0.15Ω 3 D1BDR0220001 RESISTOR, 1/8W, 0.022Ω 7 R 625 R 626 R 630 R 631 R 695 R 696 R 725 R 726 R 743 R 632 ERA3YKB104V RESISTOR, 1/16W, 100KΩ 3 ERA3YEB203V RESISTOR, 1/16W, 20KΩ 2 R 639 ERA3YEB103V RESISTOR, 1/16W, 10KΩ 1 R 640 ERA3YEB303V RESISTOR, 1/16W, 30KΩ 1 R 641 D1BDR0330001 RESISTOR, 1/8W, 0.033Ω 3 R 751 R 762 R 633 R 740 R 642 R 741 R 644 ERJ2GEJ684X RESISTOR, 1/16W, 680KΩ 1 R 648 ERJ2GEJ225X RESISTOR, 1/16W, 2.2MΩ 1 R 658 ERJ6GEYJ561V RESISTOR, 1/10W, 560Ω 1 R 659 ERJ6GEYJ222V RESISTOR, 1/10W, 2.2KΩ 2 ERJ2RKF1004X RESISTOR, 1/16W, 1MΩ 2 R 666 ERJ2RHD223X RESISTOR, 1/16W, 22KΩ 1 R 667 ERJ2RHD333X RESISTOR, 1/16W, 33KΩ 1 R 668 ERJ2RKF1003X RESISTOR, 1/16W, 100KΩ 2 R 669 ERJ2RHD222X RESISTOR, 1/16W, 2.2KΩ 1 R 670 ERJ2RKF5102X RESISTOR, 1/16W, 51KΩ 2 R 672 ERJ2RHD133X RESISTOR, 1/16W, 13KΩ 1 R 674 ERJ2RHD123X RESISTOR, 1/16W, 12KΩ 2 ERJ2GEJ154X RESISTOR, 1/16W, 150KΩ 2 R 681 ERJ2GEJ513X RESISTOR, 1/16W, 51KΩ 1 R 682 ERJ2GEJ302X RESISTOR, 1/16W, 3KΩ 1 R 660 R 665 R 671 R 676 R 712 R 724 R 680 R 688 R 708 ERJ2RKF4701X RESISTOR, 1/16W, 4.7KΩ 1 R 709 ERJ2RKF1502X RESISTOR, 1/16W, 15KΩ 2 1 R 733 R 713 ERJ2RKF2402X RESISTOR, 1/16W, 24KΩ R 720 D1BDR0470002 RESISTOR, 1/8W, 0.047Ω 1 R 729 ERA3YEB622V RESISTOR, 1/16W, 6.2KΩ 1 R 735 ERJ2GEJ221X RESISTOR, 1/16W, 220Ω 1 R 737 ERA3YEB471V RESISTOR, 1/16W, 470Ω 1 R 742 ERA3YEB243V RESISTOR, 1/16W, 24KΩ 1 R 748 ERJ2RKD114X RESISTOR, 1/16W, 110KΩ 1 R 749 ERJ2RKF1503X RESISTOR, 1/16W, 150KΩ 1 R 750 ERJ2RHD3652X RESISTOR, 1/16W, 36.5KΩ 1 R 757 ERJ2RHD302X RESISTOR, 1/16W, 3KΩ 2 D1BDR0680001 RESISTOR, 1/8W, 0.068Ω 2 R 758 R 759 R 760 R 763 ERA3YEB333V RESISTOR, 1/16W, 33KΩ 1 R 768 ERJ2RHD132X RESISTOR, 1/16W, 1.3KΩ 1 R 769 ERJ2RKF1102X RESISTOR, 1/16W, 11KΩ 2 R 771 ERJ2RKF1302X RESISTOR, 1/16W, 13KΩ 1 R 779 ERA3YEB621V RESISTOR, 1/16W, 620Ω 1 R 793 ERJ1TYJ201U RESISTOR, 1W, 200Ω 2 SW 5 K0ZZ00000617 SW 1 SW 6 ESD165225 SW 1 SW 7 K0D112B00071 SW 1 SW 8 EVQPLDA15 SW 2 R 772 R 794 SW 9 T 1 G5BYC0000010 TRANCE 1 X1 H0J143500058 OSCILLATOR, 14.318MHz 1 X2 H0J327200141 OSCILLATOR, 32.768KHz 1 X3 H0J250500025 OSCILLATOR, 25MHz 1 X4 H2D800400015 OSCILLATOR, 8MHz 1 X5 H0J300500011 OSCILLATOR, 30MHz 1 ZA 1 DRHM0100ZA SPACER 1 ZA 2 DRHM0099ZA SPACER 1 EEFUD0J151ER CAPACITOR, 6.3V, 150µF 2 CN 901 K1KA12BA0014 CONNECTOR 1 CN 902 K1FB104B0055 CONNECTOR 2 B0KB00000044 DIODE 2 J0MAB0000116 INDUCTOR 2 J0JHC0000074 INDUCTOR 4 F1G1A104A014 CAPACITOR, 10V, 0.1µF 2 C 953 F1G1E103A062 CAPACITOR, 25V, 0.01µF 1 CN 952 K1KA02BA0181 CONNECTOR 1 CN 951 K1MY20BA0002 CONNECTOR 1 D 951 B3ABB0000196 DIODE 1 D 952 MA2S111-TX DIODE 1 IC 951 C0EBE0000460 IC 1 Q 952 B1DHFB000003 TRANSISTOR 1 Q 951 UNR9214J0L TRANSISTOR 1 USB PCB C 901 C 902 CN 903 D 901 D 902 L 901 L 902 L 903 L 904 L 905 L 906 SW PCB C 951 C 952 R 952 ERJ2GEJ104X RESISTOR, 1/16W, 100KΩ 1 R 951 ERJ3GEYJ101V RESISTOR, 1/16W, 100Ω 1 R 953 ERJ6GEY0R00V RESISTOR, 1/10W, 0Ω 1 SW 951 K0D113B00081 SW 1 SW 952 K0L1BA000115 SW 2 SW 953

Source Exif Data:
File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.4
Linearized                      : Yes
Create Date                     : 2005:11:16 05:48:00Z
Modify Date                     : 2005:11:17 15:42:49+09:00
Page Count                      : 68
Creation Date                   : 2005:11:16 05:48:00Z
Mod Date                        : 2005:11:17 15:42:49+09:00
Producer                        : Acrobat Distiller 5.0.5 (Windows)
Metadata Date                   : 2005:11:17 15:42:49+09:00
Has XFA                         : No
EXIF Metadata provided by EXIF.tools

Navigation menu