Mattel Asia Pacific Sourcing FNH11-17A5T Jurassic World R/C Gyrosphere User Manual

Download:
Mirror Download [FCC.gov]
Document ID	3598334
Application ID	JLQlAyTOEz2ZfviHSGQHlA==
Document Description	User Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	94.75kB (1184366 bits)
Date Submitted	2017-10-11 00:00:00
Date Available	2017-10-11 00:00:00
Creation Date	2017-10-10 09:20:38
Producing Software	Adobe PDF library 11.00
Document Lastmod	2017-10-10 09:20:38
Document Title	User Manual
Document Creator	Adobe Illustrator CC 2014 (Macintosh)

INSTRUCTION SHEET
SPECIFICATIONS
5: QUICK TIPS
Toy:
GYROSPHERE RC
4+
INSTRUCTIONS
Toy No.:
FNH11
Part No.:
0970
Trim Size:
A4
Folded Size:
A5
Type of Fold:
# colors:
Colors:
Paper Stock:
Please keep these instructions for future reference as they contain important information.
(4) Don’t store your vehicle near heat or in direct sunlight. Always turn switches
OFF and remove all batteries for storage.
(5) Don't drive your vehicle in sand or through water or snow. Do not immerse in
water. If your vehicle or remote control does get wet, wipe it with a towel,
remove batteries, and allow to dry completely overnight. Replace with fresh
batteries before next use.
(6) When exposed to an electrostatic source, the product may malfunction. To
resume normal operation, remove and re-install the batteries.
This should reset your vehicle and let you resume normal operation.
(1) When your vehicle starts to lose power, it may lose functionality
or performance. This means it's time for fresh batteries. Your vehicle’s
running time may change depending upon your driving style and driving
environment.
(2) Radio interference can affect your vehicle's performance. Interference can be
caused by other RC vehicles running on the same frequency, electrical wires,
large buildings, or CB radios. Try to stay away from these!
(3) Point your remote control up and not down toward your vehicle. If your
vehicle gets too far away, it won’t work properly.
CONTENTS
NOTE TO ADULTS: To ensure that your child’s play is both safe and fun, please review all operating instructions and safety rules together.
• NEVER drive your vehicle on streets! Streets are for real cars!
• DO NOT pick up the vehicle while it is in motion.
• Keep fingers, hair, and loose clothing away from the wheels while the vehicle is switched ON.
• Adult supervision is recommended while this toy is being operated.
• When not in use, turn OFF the vehicle. To avoid accidental operation, remove all batteries.
BATTERY SAFETY INFORMATION
In exceptional circumstances batteries may leak fluids that can cause a chemical burn injury or ruin your product. To avoid battery leakage:
• Non-rechargeable batteries are not to be recharged.
• Rechargeable batteries are to be removed from the product before being charged.
• Rechargeable batteries are only to be charged under adult supervision.
• Do not mix alkaline, standard (carbon-zinc), or rechargeable batteries.
• Do not mix old and new batteries.
• Only batteries of the same or equivalent type as recommended are to be used.
• Batteries are to be inserted with the correct polarity.
• Exhausted batteries are to be removed from the product.
• The supply terminals are not to be short-circuited.
• Dispose of battery(ies) safely.
• Do not dispose of this product in a fire. The batteries inside may explode or leak.
REQUIRES 4 AA (LR6) and 2 AAA (LR03) ALKALINE BATTERIES,
NOT INCLUDED. DISPOSE OF BATTERIES SAFELY.
Protect the environment by not disposing of this product or any batteries
with household waste. This symbol indicates that this product shall not be
treated as household waste. Check your local authority for recycling
advice and facilities.
2.4 GHz
FOR PRODUCT SOLD IN USA
This device complies with Part 15 of the FCC Rules.
Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that
may cause undesired operation.
• This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC rules. These
limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates,
uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this
equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on,
the user is encouraged to try to correct the interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
NOTE: Changes or modifications not expressly approved by the manufacturer responsible for compliance could void the user’s authority to
operate the equipment.
©2017 Mattel. All Rights Reserved. ® and ™ designate U.S. trademarks of Mattel, except as noted. Mattel, Inc., 636 Girard Avenue, East Aurora, NY 14052,
U.S.A. Consumer Services 1-800-524-8697. Mattel U.K. Ltd., Vanwall Business Park, Maidenhead SL6 4UB. Helpline 01628 500303. Mattel Australia Pty.,
Ltd., Richmond, Victoria. 3121.Consumer Advisory Service - 1300 135 312. Mattel South Africa (PTY) LTD, Office 102 I3, 30 Melrose Boulevard,
Johannesburg 2196. Mattel East Asia Ltd., Room 503-09, North Tower, World Finance Centre, Harbour City, Tsimshatsui, HK, China. Tel.: (852) 3185-6500.
Diimport & Diedarkan Oleh: Mattel Southeast Asia Pte. Ltd. , No 19-1, Tower 3 Avenue 7, Bangsar South City, No 8, Jalan Kerinchi, 59200 Kuala Lumpur,
Malaysia. Tel: 03-33419052.
FNH11_0970
1101636913_DOM
Jurassic World is a trademark and copyright of Universal Studios and Amblin Entertainment, Inc.
Licensed by Universal Studios. All Rights Reserved.
1:
3:
BATTERY INSTALLATION
Requires 4 AA (LR6) alkaline batteries for the vehicle and 2 AAA (LR03) alkaline batteries for the remote control. Replace batteries in the vehicle or
remote control if the vehicle begins to run slowly or does not respond. For longer life, use alkaline batteries. Dispose of batteries safely.
VEHICLE
1. Unscrew the battery cover with a Phillips head screwdriver (not
included).
2. Install 4 AA (LR6) alkaline batteries (not included) with polarity (+/-)
as shown inside the battery compartment.
3. Replace battery cover and tighten screw.
CAUTION:
To prevent entanglement, keep all hair
away from the wheels.
SET UP
A.
B.
REMOTE CONTROL
1. Unscrew the battery cover with a Phillips head
screwdriver (not included).
2. Install 2 AAA (LR03) alkaline batteries (not included)
with polarity (+/-) as shown inside the battery
compartment.
3. Replace battery cover and tighten screw.
NOTE: Once batteries are installed, the remote control will
always be “ON” and will work the moment you use it.
1 figure included. Additional figure sold separately,
subject to availability. Fits most figures.
C.
D.
OPEN
FEATURES
(1) ON (I) / OFF (0)
(2) BATTERY COVER
FORWARD
TURN
(A) FORWARD
(B) TURN
4: TO PLAY
2:
CLOSED
NOTE: If the vehicle goes into sleep mode after sitting idle, pick up and shake the vehicle to wake it up and resume normal play.
Paper Weight:
EDM No.:
Black
White Offset
70 lb.
00007-1850 FCC flyer for
2.4 GHz RC item only
size: 138 x 175 (mm)
FOR PRODUCT SOLD IN USA • POUR LES PRODUITS VENDUS AUX ÉTATS-UNIS
This device complies with Part 15 of the FCC Rules.
Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and (2) this device must accept any interference received, including
interference that may cause undesired operation.
• This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the
FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential
installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee
that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct
the interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
NOTE: Changes or modifications not expressly approved by the manufacturer responsible for compliance could void the
user’s authority to operate the equipment.
Cet appareil est conforme à l'article 15 de la réglementation de la FCC.
L'utilisation de ce dispositif est autorisée seulement aux deux conditions suivantes :
(1) il ne doit pas produire de brouillage nuisible, et (2) l'utilisateur du dispositif doit être prêt à accepter tout brouillag e
radioélectrique reçu, même si ce brouillage est susceptible de compromettre le fonctionnement du dispositif.
• Cet appareil a été testé et jugé conforme aux limites de la classe B pour un appareil numérique en vertu de l'article 15 de l a
réglementation de la FCC. Ces limites ont été instaurées pour fournir une protection raisonnable contre toute interférence
nuisible dans une installation résidentielle. Cet appareil génère, utilise et peut émettre de l'énergie radiofréquence. S'il n' est
pas installé et utilisé conformément aux instructions, il peut provoquer des interférences sur les communications radio.
Cependant, il n'est pas garanti que des interférences ne se produiront pas dans certaines installations. Si cet appareil
cause des interférences à la réception radio ou télévisée (ce qui peut être vérifié en éteignant l'appareil puis en le remettan t
sous tension), l'utilisateur peut tenter de les résoudre en suivant une ou plusieurs des mesures ci-après :
• Réorienter ou déplacer l'antenne réceptrice.
• Augmenter l'espace entre l'appareil et le récepteur.
• Brancher l'appareil sur une prise de courant différente de celle sur laquelle le récepteur est branché.
• Pour obtenir de l'aide, contacter le vendeur ou un technicien radio/télévision expérimenté.
REMARQUE : Tout changement ou modification de cet appareil n'ayant pas été expressément approuvé par les parties
responsables de sa conformité peut entraîner l'annulation du droit d'exploitation de l'équipement par l'utilisateur.
FOR PRODUCT SOLD IN CANADA • POUR LES PRODUITS VENDUS AU CANADA
This equipment complies with FCC & Canada radiation exposure limits set forth for uncontrolled environments.
This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.
Cet équipement est conforme aux limites d’exposition aux radiations définies par le Canada pour des environnements non contrôlés.
Cet émetteur ne doit pas être installé au même endroit ni utilisé avec une autre antenne ou un autre émetteur.
THIS DEVICE COMPLIES WITH INDUSTRY CANADA LICENCE-EXEMPT RSSs.
CET APPAREIL EXEMPT DE LICENCE EST CONFORME AU RSSs D'INDUSTRIE CANADA.
Operation is subject to the following two conditions:
(1) this device may not cause interference, and (2) this device must accept any interference, including interference that
may cause undesired operation of the device.
L’utilisation de ce dispositif est autorisée seulement aux conditions suivantes :
(1) il ne doit pas produire de brouillage et (2) il doit pouvoir tolérer tout brouillage radioélectrique reçu, même si ce
brouillage est susceptible de compromettre son fonctionnement.
00007-1850

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.6
Linearized                      : Yes
Create Date                     : 2017:10:10 09:20:38+08:00
Creator                         : Adobe Illustrator CC 2014 (Macintosh)
Modify Date                     : 2017:10:10 09:20:38+08:00
Title                           : 
XMP Toolkit                     : Adobe XMP Core 5.4-c005 78.147326, 2012/08/23-13:03:03
Metadata Date                   : 2017:10:10 09:20:38+08:00
Creator Tool                    : Adobe Illustrator CC 2014 (Macintosh)
Format                          : application/pdf
Document ID                     : uuid:bcd5a63d-e88f-4a31-b789-2a16ca76a0d9
Instance ID                     : uuid:8ddb4058-393c-439f-a253-2607761b824e
Producer                        : Adobe PDF library 11.00
Page Count                      : 2

EXIF Metadata provided by EXIF.tools