Mattel Asia Pacific Sourcing T9499-11A2T RC CARS 2 REMOTE CONTROL EVERETT CAR TRANSPORTER User Manual

Download:
Mirror Download [FCC.gov]
Document ID	1418499
Application ID	fPDviuk9pZVg9UHIhr1hdg==
Document Description	Users Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	30.7kB (383701 bits)
Date Submitted	2011-02-18 00:00:00
Date Available	2011-02-18 00:00:00
Creation Date	2011-01-24 10:47:04
Producing Software	Adobe PDF Library 8.0
Document Lastmod	2011-01-24 10:47:10
Document Title	Users Manual
Document Creator	Adobe InDesign CS3 (5.0.2)

ENG
ESP
Questions or problems with your
product? DON’T RETURN IT TO THE
STORE! Just call us for help.
U.S. consumers may also register
their products at this number.
Si tiene alguna pregunta o problema
con el producto, NO DEVUELVA EL
PRODUCTO A LA TIENDA. Llámenos,
y con gusto le ayudaremos.
Vous avez des questions à propos de
votre produit ou il ne fonctionne pas
correctement? NE LE RETOURNEZ
PAS AU MAGASIN! Un appel suffit.
• Protect the environment by not disposing of this product with household waste (2002/96/EC). Check your local authority for
recycling advice and facilities.
• Proteger el medio ambiente no disponiendo de este producto en la basura del hogar (2002/96/EC). Consultar con la agencia
local pertinente en cuanto a información y centros de reciclaje.
• Protéger l'environnement en ne jetant pas ce produit avec les ordures ménagères (2002/96/EC). Consulter la municipalité
pour obtenir des conseils sur le recyclage et connaître les centres de dépôt de la région.
COMPLIANCE WITH FCC REGULATIONS (VALID IN U.S.
ONLY).
This device complies with Part 15 of the FCC Rules.
Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and
(2) this device must accept any interference received,
including interference that may cause undesired operation.
This equipment has been tested and found to comply with
the limits for a Class B digital device, pursuant to part
15 of the FCC rules. These limits are designed to provide
reasonable protection against harmful interference in a
residential installation. This equipment generates, uses
and can radiate radio frequency energy and, if not installed
and used in accordance with the instructions, may cause
harmful interference to radio communications. However,
there is no guarantee that interference will not occur in
a particular installation. If this equipment does cause
harmful interference to radio or television reception, which
can be determined by turning the equipment off and on,
the user is encouraged to try to correct the interference by
one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and
receiver.
• Connect the equipment into an outlet on a circuit
different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician
for help.
COMPLIANCE WITH FCC REGULATIONS (VALID IN U.S.
ONLY).
This device complies with Part 15 of the FCC Rules.
Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and
(2) this device must accept any interference received,
including interference that may cause undesired operation.
This equipment has been tested and found to comply with
the limits for a Class B digital device, pursuant to part
15 of the FCC rules. These limits are designed to provide
reasonable protection against harmful interference in a
residential installation. This equipment generates, uses
and can radiate radio frequency energy and, if not installed
and used in accordance with the instructions, may cause
harmful interference to radio communications. However,
there is no guarantee that interference will not occur in
a particular installation. If this equipment does cause
harmful interference to radio or television reception, which
© 2010 Mattel, Inc. All Rights Reserved. Tous droits réservés.Mattel, Inc. 636 Girard Avenue, East Aurora, NY 14052, U.S.A. Consumer Relations 1-888-557-8926.
Mattel Canada Inc., Mississauga, Ontario L5R 3W2. You may call us free at 1-888-557-8926. Mattel Australia Pty., Ltd., Richmond, Victoria. 3121.Consumer
Advisory Service - 1300 135 312. Mattel East Asia Ltd., Room 1106, South Tower, World Finance Centre, Harbour City, Tsimshatsui, HK, China. Diimport &
Diedarkan Oleh: Mattel SEA Ptd Ltd.(993532-P) Lot 13.5, 13th Floor, Menara Lien Hoe, Persiaran Tropicana Golf Country Resort, 47410 PJ. Tel:03-78803817,
Fax:03-78803867. Retain this address for future reference. Mattel U.K. Ltd., Vanwall Business Park, Maidenhead SL6 4UB. Importado y distribuido por Mattel
de México, S.A. de C.V.R.F.C, Insurgentes Sur # 3579, Torre 3, Oficina 601, Col. Tlalpan, Delegación Tlalpan, C.P. 14020, México, D.F. MME-920701-NB3.
59-05-51-00. Ext. 5206 ó - 01-800-463 59-89 Mattel Chile, S.A., Avenida Américo Vespucio 501-B, Quilicura, Santiago. Mattel de Venezuela, C.A. RIF J301596439,
Ave. Mara, C.C. Macaracuay Plaza, Torre B, Piso 8, Colinas de la California, Caracas 1071. Mattel Argentina S.A., Curupaytí 1186, (1607) - Villa Adelina, Buenos
Aires. Mattel Colombia, S.A., calle 123#7-07 P.5, Bogotá. Importado por : Mattel do Brasil Ltda.- CNPJ : 54.558.002/0008-04 - Av. Tenente Marques, 1246 - Sala
02 - 2º. Andar - 07770-000 - Polvilho - Cajamar - SP - Brasil Serviço de Atendimento ao Consumidor (SAC): 0800-550780 - sac@mattel.com Mattel France,
27/33 rue d’Antony, Silic 145, 94523 Rungis Cedex N° Indigo 0 825 00 00 25 (0,15 € TTC/mn) ou www.allomattel.com. Mattel España, S.A., Aribau 200. 08036
Barcelona. cservice.spain@mattel.com Tel: 902.20.30.10 http://www.service.mattel.com/es Mattel Portugal Lda., Av. da República, nº 90/96, 2º andar Fracção 2,
1600-206 Lisboa service.mattel.com
COMPLIANCE WITH FCC REGULATIONS (VALID IN U.S.
ONLY).
This device complies with Part 15 of the FCC Rules.
Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and
(2) this device must accept any interference received,
including interference that may cause undesired operation.
This equipment has been tested and found to comply with
the limits for a Class B digital device, pursuant to part
15 of the FCC rules. These limits are designed to provide
reasonable protection against harmful interference in a
residential installation. This equipment generates, uses
and can radiate radio frequency energy and, if not installed
and used in accordance with the instructions, may cause
harmful interference to radio communications. However,
there is no guarantee that interference will not occur in
a particular installation. If this equipment does cause
harmful interference to radio or television reception, which
NOTE: Changes or modifications not expressly approved
by the manufacturer responsible for compliance could void
the user’s authority to operate the equipment.
RSS - 310 (Canada) (VALID FOR CANADA
ONLY - VALABLE AU CANADA SEULEMENT)
This Category II radiocommunication device complies with
Industry Canada Standard RSS-310. Operation is subject
to the following two conditions: (1) this device may
not cause interference, and (2) this device must accept
any interference, including interference that may cause
undesired operation of the device.
Ce dispositif de radiocommunication de catégorie
II respecte la norme CNR-310 d’Industrie Canada.
L'utilisation de ce dispositif est autorisée seulement aux
deux conditions suivantes : (1) il ne doit pas produire de
brouillage, et (2) l'utilisateur du dispositif doit être prêt
à accepter tout brouillage radioélectrique reçu, même
si ce brouillage est susceptible de compromettre le
fonctionnement du dispositif. CNR-310 d’Industrie Canada
(CANADA SEULEMENT)
CNR-310 d’Industrie Canada (CANADA SEULEMENT)
27.145 MHz TX RF = 54 dBμV/m @ 3m.
3+
®
T9499-0720
CAUTION: Surfaces may become hot and cause burns
if electronics get wet. Do not operate vehicle through water
or snow.
CAUTION:
To prevent entanglement, keep all hair
away from the wheels.
PRECAUCIÓN: Las superficies se pueden calentar y
causar quemaduras si las piezas electrónicas se mojan. No usar
el vehículo en agua ni nieve.
PRECAUCIÓN: Para evitar lesiones, mantener el cabello
MISE EN GARDE : Les surfaces peuvent devenir
chaudes et causer des brûlures si les composants électroniques
sont mouillés. Ne pas utiliser le véhicule dans l'eau ou la neige.
MISE EN GARDE : Pour éviter tout risque
d'enchevêtrement, tenir les cheveux éloignés des roues.
alejado de las ruedas.
can be determined by turning the equipment off and on,
the user is encouraged to try to correct the interference by
one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and
receiver.
• Connect the equipment into an outlet on a circuit
different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician
for help.
NOTE: Changes or modifications not expressly approved
by the manufacturer responsible for compliance could void
the user’s authority to operate the equipment.
Keep these instructions for future reference as they contain important information.
IMPORTANT: Please read all “Consumer Information” before operating your vehicle.
can be determined by turning the equipment off and on,
the user is encouraged to try to correct the interference by
one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and
receiver.
• Connect the equipment into an outlet on a circuit
different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician
for help.
NOTE: Changes or modifications not expressly approved
by the manufacturer responsible for compliance could void
the user’s authority to operate the equipment.
Leer y guardar estas instrucciones para futura referencia,
ya que contienen información de importancia acerca de este producto.
IMPORTANTE: Leer toda la "Información al consumidor" antes de usar el vehículo.
Conserver ce mode d'emploi pour s'y référer en cas de besoin car
il contient des informations importantes. IMPORTANT : Lire tous les
«Renseignements pour les consommateurs» avant d'utiliser le véhicule.
1
Transmitter batteries not included.
2 X AA
X = TRY ME
O = OFF
I = ON
ONE-TIME SNAP ASSEMBLY
4 X AA
ENG
I. CONTENTS/ FEATURES
Plane
Transmitter
II. BATTERY INSTALLATION
(Transmitter & Vehicle)
Requires 2 AA alkaline batteries for the transmitter and
includes 4 AA batteries for the vehicle.
Vehicle
1. Unscrew the battery cover with a Phillips head
screwdriver (not included).
2. Remove batteries included for demonstration
purposes and dispose of them safely.
3. Install 4 new alkaline batteries with polarity (+/-) as
shown inside the battery compartment.
4. Replace battery cover and tighten screw.
Transmitter
1. Unscrew the battery cover with a Phillips head
screwdriver (not included).
2. Transmitter requires 2 AA alkaline batteries. Install
with polarity (+/-) as shown inside the battery
compartment.
3. Replace battery cover and tighten screw.
III. OPERATION
Your vehicle is designed for easy operation. Switch
vehicle ON. Push control stick forward and vehicle
will move forward as if taking off. Pull control stick
backward and vehicle will reverse left in a circle.
IV. QUICK TIPS
 hen your vehicle starts to lose power, it may lose
functionality or performance. It’s time for fresh
batteries. Your vehicle’s running time varies depending
on your driving style.
Interference can affect your vehicle's performance.
Interference can be caused by other I/R devices like a
TV remote control or other remotes in the house. Try
to stay away from these!
Point the transmitter toward the vehicle. If your vehicle
gets too far away, it won’t work properly.
Don't drive your vehicle in sand or through water or
snow. If your vehicle does get wet, wipe it with a towel
and allow to dry completely overnight.
Don’t store your vehicle near heat or in direct sunlight.
Always turn switches OFF and remove all batteries for
storage.
Do not obstruct the line of sight.
Do not exceed the specified range.
This vehicle works better indoors than outdoors where
sunlight can sometimes interfere with the I/R.
If that doesn't work, simply turn the vehicle's power
switch OFF and then ON again. This should reset your
vehicle and let you resume normal operation.
V. BATTERY SAFETY INFORMATION
I. CONTENTS/ FEATURES
In exceptional circumstances batteries may leak fluids
that can cause a chemical burn injury or ruin your
product. To avoid battery leakage:
• Non-rechargeable batteries are not to be recharged.
• Rechargeable batteries are to be removed from the
product before being charged (if designed to be
removable).
• Rechargeable batteries are only to be charged under
adult supervision (if designed to be removable).
• Do not mix alkaline, standard (carbon-zinc), or
rechargeable (nickel-cadmium) batteries.
• Do not mix old and new batteries.
• Only batteries of the same or equivalent type as
recommended are to be used.
• Batteries are to be inserted with the correct polarity.
• Exhausted batteries are to be removed from the product.
• The supply terminals are not to be short-circuited.
• Dispose of battery(ies) safely.
• Do not dispose of this product in a fire. The batteries
inside may explode or leak.
Plane
Transmitter
Battery Performance Note:
For best performance use regular or high-performance
alkaline batteries (where disposable batteries are called
for). If your vehicle is supplied with standard (carbonzinc) batteries for initial use and/or demonstration
purposes, we recommend replacing them with alkaline
batteries when necessary. Battery life may vary depending
on battery brand.
Transmitter
1. Unscrew the battery cover with a Phillips head
screwdriver (not included).
2. Transmitter requires 2 AA alkaline batteries. Install
with polarity (+/-) as shown inside the battery
compartment.
3. Replace battery cover and tighten screw.
VI. CONSUMER INFORMATION
Note to Adults: To ensure that the child’s play is both
safe and fun, please review all operating instructions and
safety rules with your child.
Safety Tips
• NEVER drive your vehicle on streets! They’re for real
cars!
• DO NOT pick up the vehicle while in motion.
• Keep fingers, hair and loose clothing away from the tires
and the wheel hubs while the vehicle is switched ON.
• Adult supervision is recommended when this vehicle is
being operated.
• To avoid accidental operation, remove all batteries when
not in use.
ESP
II. BATTERY INSTALLATION
(Transmitter & Vehicle)
Requires 2 AA alkaline batteries for the transmitter and
includes 4 AA batteries for the vehicle.
Vehicle
1. Unscrew the battery cover with a Phillips head
screwdriver (not included).
2. Remove batteries included for demonstration
purposes and dispose of them safely.
3. Install 4 new alkaline batteries with polarity (+/-) as
shown inside the battery compartment.
4. Replace battery cover and tighten screw.
III. OPERATION
Your vehicle is designed for easy operation. Switch
vehicle ON. Push control stick forward and vehicle
will move forward as if taking off. Pull control stick
backward and vehicle will reverse left in a circle.
IV. QUICK TIPS
 hen your vehicle starts to lose power, it may lose
functionality or performance. It’s time for fresh
batteries. Your vehicle’s running time varies depending
on your driving style.
Interference can affect your vehicle's performance.
Interference can be caused by other I/R devices like a
TV remote control or other remotes in the house. Try
to stay away from these!
Point the transmitter toward the vehicle. If your vehicle
gets too far away, it won’t work properly.
Don't drive your vehicle in sand or through water or
snow. If your vehicle does get wet, wipe it with a towel
and allow to dry completely overnight.
Don’t store your vehicle near heat or in direct sunlight.
Always turn switches OFF and remove all batteries for
storage.
Do not obstruct the line of sight.
Do not exceed the specified range.
This vehicle works better indoors than outdoors where
sunlight can sometimes interfere with the I/R.
If that doesn't work, simply turn the vehicle's power
switch OFF and then ON again. This should reset your
vehicle and let you resume normal operation.
V. BATTERY SAFETY INFORMATION
In exceptional circumstances batteries may leak fluids
that can cause a chemical burn injury or ruin your
product. To avoid battery leakage:
• Non-rechargeable batteries are not to be recharged.
• Rechargeable batteries are to be removed from the
product before being charged (if designed to be
removable).
• Rechargeable batteries are only to be charged under
adult supervision (if designed to be removable).
• Do not mix alkaline, standard (carbon-zinc), or
rechargeable (nickel-cadmium) batteries.
• Do not mix old and new batteries.
• Only batteries of the same or equivalent type as
recommended are to be used.
• Batteries are to be inserted with the correct polarity.
• Exhausted batteries are to be removed from the product.
• The supply terminals are not to be short-circuited.
• Dispose of battery(ies) safely.
• Do not dispose of this product in a fire. The batteries
inside may explode or leak.
Battery Performance Note:
For best performance use regular or high-performance
alkaline batteries (where disposable batteries are called
for). If your vehicle is supplied with standard (carbonzinc) batteries for initial use and/or demonstration
purposes, we recommend replacing them with alkaline
batteries when necessary. Battery life may vary depending
on battery brand.
VI. CONSUMER INFORMATION
Note to Adults: To ensure that the child’s play is both
safe and fun, please review all operating instructions and
safety rules with your child.
Safety Tips
• NEVER drive your vehicle on streets! They’re for real
cars!
• DO NOT pick up the vehicle while in motion.
• Keep fingers, hair and loose clothing away from the tires
and the wheel hubs while the vehicle is switched ON.
• Adult supervision is recommended when this vehicle is
being operated.
• To avoid accidental operation, remove all batteries when
not in use.
I. CONTENTS/ FEATURES
Plane
Transmitter
II. BATTERY INSTALLATION
(Transmitter & Vehicle)
Requires 2 AA alkaline batteries for the transmitter and
includes 4 AA batteries for the vehicle.
Vehicle
1. Unscrew the battery cover with a Phillips head
screwdriver (not included).
2. Remove batteries included for demonstration
purposes and dispose of them safely.
3. Install 4 new alkaline batteries with polarity (+/-) as
shown inside the battery compartment.
4. Replace battery cover and tighten screw.
Transmitter
1. Unscrew the battery cover with a Phillips head
screwdriver (not included).
2. Transmitter requires 2 AA alkaline batteries. Install
with polarity (+/-) as shown inside the battery
compartment.
3. Replace battery cover and tighten screw.
III. OPERATION
Your vehicle is designed for easy operation. Switch
vehicle ON. Push control stick forward and vehicle
will move forward as if taking off. Pull control stick
backward and vehicle will reverse left in a circle.
IV. QUICK TIPS
 hen your vehicle starts to lose power, it may lose
functionality or performance. It’s time for fresh
batteries. Your vehicle’s running time varies depending
on your driving style.
Interference can affect your vehicle's performance.
Interference can be caused by other I/R devices like a
TV remote control or other remotes in the house. Try
to stay away from these!
Point the transmitter toward the vehicle. If your vehicle
gets too far away, it won’t work properly.
Don't drive your vehicle in sand or through water or
snow. If your vehicle does get wet, wipe it with a towel
and allow to dry completely overnight.
Don’t store your vehicle near heat or in direct sunlight.
Always turn switches OFF and remove all batteries for
storage.
Do not obstruct the line of sight.
Do not exceed the specified range.
This vehicle works better indoors than outdoors where
sunlight can sometimes interfere with the I/R.
If that doesn't work, simply turn the vehicle's power
switch OFF and then ON again. This should reset your
vehicle and let you resume normal operation.
V. BATTERY SAFETY INFORMATION
In exceptional circumstances batteries may leak fluids
that can cause a chemical burn injury or ruin your
product. To avoid battery leakage:
• Non-rechargeable batteries are not to be recharged.
• Rechargeable batteries are to be removed from the
product before being charged (if designed to be
removable).
• Rechargeable batteries are only to be charged under
adult supervision (if designed to be removable).
• Do not mix alkaline, standard (carbon-zinc), or
rechargeable (nickel-cadmium) batteries.
• Do not mix old and new batteries.
• Only batteries of the same or equivalent type as
recommended are to be used.
• Batteries are to be inserted with the correct polarity.
• Exhausted batteries are to be removed from the product.
• The supply terminals are not to be short-circuited.
• Dispose of battery(ies) safely.
• Do not dispose of this product in a fire. The batteries
inside may explode or leak.
Battery Performance Note:
For best performance use regular or high-performance
alkaline batteries (where disposable batteries are called
for). If your vehicle is supplied with standard (carbonzinc) batteries for initial use and/or demonstration
purposes, we recommend replacing them with alkaline
batteries when necessary. Battery life may vary depending
on battery brand.
VI. CONSUMER INFORMATION
Note to Adults: To ensure that the child’s play is both
safe and fun, please review all operating instructions and
safety rules with your child.
Safety Tips
• NEVER drive your vehicle on streets! They’re for real
cars!
• DO NOT pick up the vehicle while in motion.
• Keep fingers, hair and loose clothing away from the tires
and the wheel hubs while the vehicle is switched ON.
• Adult supervision is recommended when this vehicle is
being operated.
• To avoid accidental operation, remove all batteries when
not in use.

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.4
Linearized                      : Yes
XMP Toolkit                     : Adobe XMP Core 4.0-c006 1.236519, Wed Jun 14 2006 08:31:24
Instance ID                     : uuid:4872d814-5193-4410-930b-f7acdd60c1af
Document ID                     : adobe:docid:indd:47b4fb19-261f-11e0-9b41-ba403ee9089c
Rendition Class                 : proof:pdf
Derived From Instance ID        : 55e2040e-9489-11de-b024-adef6c9adf7e
Derived From Document ID        : adobe:docid:indd:04d6c321-71ef-11de-8c78-c5beea69f835
Manifest Link Form              : DirectStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream
Manifest Placed X Resolution    : 72.00, 300.00, 180.00, 180.00, 180.00, 180.00, 180.00
Manifest Placed Y Resolution    : 72.00, 300.00, 180.00, 180.00, 180.00, 180.00, 180.00
Manifest Placed Resolution Unit : Inches, Inches, Inches, Inches, Inches, Inches, Inches
Manifest Reference Instance ID  : uuid:C984D65017F411DB8A31E5FB42EDD708, uuid:5C52B92D12CCDF1199CCCE182A247254, uuid:B7316899FC9FDF11A1E591A6DB1DB5A2, uuid:49A54F9CFE9FDF11A1E591A6DB1DB5A2, uuid:B7316899FC9FDF11A1E591A6DB1DB5A2, uuid:B7316899FC9FDF11A1E591A6DB1DB5A2, uuid:B7316899FC9FDF11A1E591A6DB1DB5A2
Manifest Reference Document ID  : uuid:C984D64F17F411DB8A31E5FB42EDD708, uuid:5352B92D12CCDF1199CCCE182A247254
Create Date                     : 2011:01:24 10:47:04+08:00
Modify Date                     : 2011:01:24 10:47:10+08:00
Metadata Date                   : 2011:01:24 10:47:10+08:00
Creator Tool                    : Adobe InDesign CS3 (5.0.2)
Format                          : application/pdf
Producer                        : Adobe PDF Library 8.0
Trapped                         : False
Page Count                      : 2
Creator                         : Adobe InDesign CS3 (5.0.2)

EXIF Metadata provided by EXIF.tools