Mattel Asia Pacific Sourcing V0098-11A2T RC HW GYMKHANA CAR User Manual
Mattel asia Pacific Sourcing Ltd. RC HW GYMKHANA CAR Users Manual
Users Manual
| Download: |  |
| Mirror Download [FCC.gov] | |
| Document ID | 1444854 |
| Application ID | 2nYhGYhqrDXBHWFPsWjb4w== |
| Document Description | Users Manual |
| Short Term Confidential | No |
| Permanent Confidential | No |
| Supercede | No |
| Document Type | User Manual |
| Display Format | Adobe Acrobat PDF - pdf |
| Filesize | 123.75kB (1546828 bits) |
| Date Submitted | 2011-04-07 00:00:00 |
| Date Available | 2011-04-07 00:00:00 |
| Creation Date | 2011-03-28 19:43:37 |
| Producing Software | Adobe PDF Library 8.0 |
| Document Lastmod | 2011-03-28 19:44:28 |
| Document Title | Users Manual |
| Document Creator | Adobe InDesign CS3 (5.0.2) |
8+ Keep these instructions for future reference as they contain important information. IMPORTANT: Please read all “Consumer Information” before operating your vehicle. ® V0098-0920 C AUTION: Surfaces may become hot and CAUTION: To prevent entanglement, keep all cause burns if electronics get wet. Do not operate vehicle through water or snow. hair away from the wheels. I. CONTENTS/ FEATURES Vehicle Transmitter Steering wheel Battery cover ON (I) / OFF (0) Steering adjuster Tight Drift Button V0098-0920 .indd 1 3/28/11 7:43:38 PM II. BATTERY INSTALLATION (Transmitter & Vehicle) Requires 6 AA alkaline batteries for the vehicle and 2 AA alkaline batteries for the transmitter. Batteries not included. Vehicle 1. Unscrew the battery cover with a Phillips head screwdriver (not included). 2. Your vehicle requires 6 AA alkaline batteries. Install with polarity (+/-) as shown inside the battery compartment. 3. Replace battery cover and tighten screw. 6 X AA Transmitter 1. Unscrew the battery cover with a Phillips head screwdriver (not included). 2. Transmitter requires 2 AA alkaline batteries. Install with polarity (+/-) as shown inside the battery compartment. 3. Replace battery cover and tighten screw. NOTE: Once the batteries are installed the transmitter will always be “ON” and will work automatically the moment you use it. 2 X AA III. OPERATION FORWARD WIDE DRIFT LEFT WIDE DRIFT RIGHT REVERSE TIGHT DRIFT LEFT TIGHT DRIFT RIGHT One-touch tight drifts! V0098-0920 .indd 2 One-touch tight drifts! 3/28/11 7:43:39 PM IV. QUICK TIPS hen your vehicle starts to lose power, it may lose functionality or performance. It’s time for fresh batteries. Your vehicle’s running time may change depending on your driving style. Radio interference can affect your vehicle's performance. Interference can be caused by other R/C vehicles running on the same frequency, electrical wires, large buildings or CB radios. Try to stay away from these! Point your transmitter up - not down toward your vehicle. If your vehicle gets too far away, it won’t work properly. Don't drive your vehicle in sand or through water or snow. If your vehicle does get wet, wipe it with a towel and allow to dry completely overnight. Don’t store your vehicle near heat or in direct sunlight. Always turn switches OFF and remove all batteries for storage. If the vehicle malfunctions, please turn the power OFF and ON again. This should reset your vehicle and let you resume normal operation. V. BATTERY SAFETY INFORMATION In exceptional circumstances batteries may leak fluids that can cause a chemical burn injury or ruin your product. To avoid battery leakage: • Non-rechargeable batteries are not to be recharged. • Rechargeable batteries are to be removed from the product before being charged (if designed to be removable). • Rechargeable batteries are only to be charged under adult supervision (if designed to be removable). • Do not mix alkaline, standard (carbon-zinc), or rechargeable (nickel-cadmium) batteries. • Do not mix old and new batteries. • Only batteries of the same or equivalent type as recommended are to be used. • Batteries are to be inserted with the correct polarity. • Exhausted batteries are to be removed from the product. • The supply terminals are not to be short-circuited. • Dispose of battery(ies) safely. • Do not dispose of this product in a fire. The batteries inside may explode or leak. VI. CONSUMER INFORMATION Note to Adults: To ensure that the child’s play is both safe and fun, please review all operating instructions and safety rules with your child. Safety Tips • NEVER drive your vehicle on streets! They’re for real cars! • DO NOT pick up the vehicle while in motion. • Keep fingers, hair and loose clothing away from the tires and the wheel hubs while the vehicle is switched ON. • Adult supervision is recommended when this vehicle is being operated. • To avoid accidental operation, remove all batteries when not in use. Protect the environment by not disposing of this product with household waste (2002/96/EC). Check your local authority for recycling advice and facilities. Battery Performance Note: For best performance use regular or high-performance alkaline batteries (where disposable batteries are called for). If your vehicle is supplied with standard (carbonzinc) batteries for initial use and/or demonstration purposes, we recommend replacing them with alkaline batteries when necessary. Battery life may vary depending on battery brand. V0098-0920 .indd 3 3/28/11 7:43:43 PM © 2011 Mattel, Inc. All Rights Reserved. Mattel, Inc., 636 Girard Avenue, East Aurora, NY 14052, U.S.A. Consumer Relations 1-888-557-8926. • Mattel U.K. Ltd., Vanwall Business Park, Maidenhead SL6 4UB. Helpline 01628 500303. • Mattel Australia Pty., Ltd., Richmond, Victoria. 3121.Consumer Advisory Service - 1300 135 312. • Mattel East Asia Ltd., Room 1106, South Tower, World Finance Centre, Harbour City, Tsimshatsui, HK, China. • Diimport & Diedarkan Oleh: Mattel SEA Ptd Ltd.(993532-P) Lot 13.5, 13th Floor, Menara Lien Hoe, Persiaran Tropicana Golf Country Resort, 47410 PJ. Tel:03-78803817, Fax:03-78803867. service.mattel.com Ford Oval and nameplates are registered trademarks owned and licensed by Ford Motor Company. www.ford.com All commercial and publicity rights to use or market the name and likeness of ‘Ken Block’ are licensed exclusively through the Wasserman Media Group, LLC. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. • This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: • Reorient or relocate the receiving antenna. • Increase the separation between the equipment and receiver. • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. • Consult the dealer or an experienced radio/TV technician for help. NOTE: Changes or modifications not expressly approved by the manufacturer responsible for compliance could void the user’s authority to operate the equipment. RSS - 310 (Canada) (VALID FOR CANADA ONLY - VALABLE AU CANADA SEULEMENT) This Category II radiocommunication device complies with Industry Canada Standard RSS-310. Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device. Ce dispositif de radiocommunication de catégorie II respecte la norme CNR-310 d’Industrie Canada. L'utilisation de ce dispositif est autorisée seulement aux deux conditions suivantes : (1) il ne doit pas produire de brouillage, et (2) l'utilisateur du dispositif doit être prêt à accepter tout brouillage radioélectrique reçu, même si ce brouillage est susceptible de compromettre le fonctionnement du dispositif. CNR-310 d’Industrie Canada (CANADA SEULEMENT) 27.145MHz is 71.1 dBuV/m @ 3m. V0098-0920 .indd 4 3/28/11 7:43:43 PM
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.4 Linearized : No Tagged PDF : Yes XMP Toolkit : Adobe XMP Core 4.0-c316 44.253921, Sun Oct 01 2006 17:08:23 Instance ID : uuid:79851569-334c-624b-8bc1-ca4b3655209f Document ID : adobe:docid:indd:118d2cf2-d9d9-11df-8803-d3f7e26fa360 Rendition Class : proof:pdf Derived From Instance ID : 118d2cf1-d9d9-11df-8803-d3f7e26fa360 Derived From Document ID : adobe:docid:indd:80e8d1b4-d60f-11df-b678-eb7c6a07227d Manifest Link Form : ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream Manifest Placed X Resolution : 300.00, 300.00, 72.00, 72.00 Manifest Placed Y Resolution : 300.00, 300.00, 72.00, 72.00 Manifest Placed Resolution Unit : Inches, Inches, Inches, Inches Manifest Reference Instance ID : uuid:393A070F4346E011B2BBD911305DA758, xmp.iid:0380117407206811B596B4C880F8E833, uuid:9EAF8B1F09B711DB843DB1315DF1E31D, uuid:F03AAE98C24BE0119C9AC5EBB176D519 Manifest Reference Document ID : uuid:A76BD2F14246E01180CFC7B029AD20F7, uuid:98D2D02E05CEDF118908A369150E2B86, uuid:9EAF8B1D09B711DB843DB1315DF1E31D, uuid:8A813FA2C329DE11B07C919A3015169B Create Date : 2011:03:28 19:43:37+08:00 Modify Date : 2011:03:28 19:44:28+08:00 Metadata Date : 2011:03:28 19:44:28+08:00 Creator Tool : Adobe InDesign CS3 (5.0.2) Thumbnail Format : JPEG Thumbnail Width : 256 Thumbnail Height : 256 Thumbnail Image : (Binary data 9669 bytes, use -b option to extract) Format : application/pdf Producer : Adobe PDF Library 8.0 Trapped : False Page Count : 4 Creator : Adobe InDesign CS3 (5.0.2)EXIF Metadata provided by EXIF.tools