Maytel TELME-XT Wireless Digital Intercom User Manual

Maytel Co., Ltd Wireless Digital Intercom Users Manual

User Manual

           Copyright ⓒ 2017. Lab-T, Inc.     User Manual
TelMe-XT (SP-100M);Wireless Digital IntercomIts user’s manual has been provided inIts package separately
●77 channels selection and 9 stepsaudio output control
Plug the USB charging cable into theUSB port and recharge the battery.The Red color LED in the right sidetop corner of device is turned onduring the charging and turned offwhen the battery is fully charged.For functional quality, this device is notoperate when the battery is charging.
Compliance StatementTHIS DEVICE COMPLIES WITH PART 15 OF THE FCC RULES.Operation  is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.CAUTIONChanges or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.This equipment complies with the essential requirements of ECDirective 2014/35/EU, 2014/30/EC and 2014/53/EU, as applicable.Declarations are available from your local representative.77chISM 2403MHz~2479MHz6.5dBm ±0.5dB1MHz2Mbps2MHzTelMe-XT :      60g typ.SP-100S :    385g typ.Li-ion Battery@3.7V 800mA forTelMe-XT and @7.4V 1700mA forSP-100SFor TelMe-XT : 10Hr typ.For SP-100S : 6Hr typ.TelMe-XT : 50mm X 88mm X 15mmSP-100S : 130mm X 96mm X 61mmReplaceable batteryIf an equipment is provided with a replaceable battery, and if replacement by anincorrect type could result in an explosion (for example, with some lithium batteries),the following:- if the battery is placed in an OPERATOR ACCESS AREA, there shall be a marking close to the battery or a statement in both the operating and the servicing instructions;- if the battery is placed elsewhere in the equipment, there shall be a marking close tothe battery or a statement in the servicing instructions.This marking or statement shall include the following or similar text:CAUTIONRISK OF EXPLOSION IF BATTERY IS REPLACED BY AN INCORRECT TYPE.DISPOSE OF USED BATTERIES ACCORDING TO THE INSTRUCTIONS.Type of ModulationISM 2.4GHz: GFSK Modulation withFrequency Hopping / F1E

Navigation menu