Medtronic M333688D001 RFID MODULE FOR USE WITH A RF GENERATOR FOR IDENTIFICATION OF COMPATIBILITY PURPOSES User Manual 10116967DOC Rev1A
Medtronic, Inc. RFID MODULE FOR USE WITH A RF GENERATOR FOR IDENTIFICATION OF COMPATIBILITY PURPOSES 10116967DOC Rev1A
User Manual
RFID_User_Manual_FCV.fm 10/1/13 10:18 am 8.5 in x 11 in (215.9 mm x 279.4 mm) RFID Module MODEL NUMBER: M333688D001 10116967DOC Rev. 1A Medtronic Confidential CS0049 RFID_User_Manual_FCV.fm 10/1/13 8.5 in x 11 in (215.9 mm x 279.4 mm) 10:18 am Medtronic Confidential CS0049 FEDERAL COMMUNICATIONS COMMISSION (FCC) COMPLIANCE: FCC ID: LF5-M333688D001 This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. The FCC regulates marketing, sale and importation of radio frequency (RF) devices. When importing an RF device the importer or ultimate consignee, or their designated broker, may be required to declare that the RF device meets the FCC importation conditions under Title 47 of the Code of Federal Regulation (CFR) Section 2.1204. See KDB 997198 Importation Guidelines for more details. The host product manufacturer is responsible for ensuring that the final product with the module installed and fully operational complies with all applicable FCC equipment authorizations regulations, requirements and equipment functions. Refer to CFR Title 47 Part 2 Subpart J Equipment Authorization Procedures, and KDB 784748 D01 V07 Labeling Guidelines. The antenna must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi transmitter product codes. Separate approval is required for all other operating configurations, including portable configurations with respect to CFR Title 47 Part 2.1093 and different antenna configuration. Any changes or modifications of this product, not approved by manufacturer will void the user's authority to operate the equipment. The antenna must be installed such that it is a distance of at least 20 cm (7.9 in) between the antenna and users. The module will only be installed in mobile applications as defined by part 2.1091(b). ■ ■ ■ ■ ■ ■ ■ ■ INDUSTRY CANADA COMPLIANCE: IC: 3408D-M333688D001 This device complies with Industry Canada license-exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device. Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de licence. L'exploitation est autorisée aux deux conditions suivantes : (1) l'appareil ne doit pas produire de brouillage, et (2) l'utilisateur de l'appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d'en compromettre le fonctionnement. ■ ■ 10116967DOC Rev. 1A RFID_User_Manual_EN_CH.fm 10/1/13 10:18 am 8.5 in x 11 in (215.9 mm x 279.4 mm) Medtronic Confidential CS0049 The following statements must be on the label or the manual of the host device: ■ “This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a distance of at least 20 cm between the radiator and your body. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.” ■ “This device complies with Industry Canada license-exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device.” ■ “Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de licence. L'exploitation est autorisée aux deux conditions suivantes: (1) l'appareil ne doit pas produire de brouillage, et (2) l'utilisateur de l'appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d'en compromettre le fonctionnement.” The following statements must be on the label of the host device: ■ “Contains FCC ID: LF5-M333688D001” ■ “Contains IC: 3408D-M333688D001” 10116967DOC Rev. 1A RFID_User_Manual_CST_bcv.fm 10/1/13 Medtronic Confidential CS0049 10:18 am 8.5 in x 11 in (215.9 mm x 279.4 mm) Manufacturer: Medtronic, Inc. 710 Medtronic Parkway Minneapolis, MN 55432 USA Tel. +1 763 514 4000 Fax +1 763 514 4879 www.medtronic.com *10116967DOC* 10116967DOC Rev. 1A © Medtronic, Inc. 2013 All Rights Reserved 10116967DOC Rev. 1A
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.5 Linearized : Yes Page Mode : UseOutlines XMP Toolkit : 3.1-702 Creator Tool : FrameMaker 10.0.2 Modify Date : 2013:12:09 13:32:14-05:00 Create Date : 2013:10:01 10:17:38Z Metadata Date : 2013:12:09 13:32:14-05:00 Format : application/pdf Title : 10116967DOC_Rev1A.book Creator : haltek1 Producer : Acrobat Distiller 10.1.4 (Windows) Document ID : uuid:a6ffc941-f003-4cef-b304-ad28a054e26b Instance ID : uuid:52dd5cf9-315d-4a43-86d0-173e709eafda Page Count : 4 Author : haltek1EXIF Metadata provided by EXIF.tools