MeiDong Acoustics DIAMOND Bluetooth Speaker User Manual Diamond manual with NFC without voice guaidance
Shenzhen MeiDong Acoustics Co., LTD Bluetooth Speaker Diamond manual with NFC without voice guaidance
Contents
- 1. Users Manual
- 2. User Manual
User Manual
User’s Guide Diamond FCC ID:2AB5T-DIAMOND Contents 2 3 1. Introduction 2. Battery Precaution 3. Getting Started 6. NFC Connection 5. Bluetooth Connection and disconnection 4. Cable Connection 7. Microphone usage 8. LED Display Status 9. Battery Charging 10. Product Care Please read the following safety warning and precaution before using your device. -1- Specification Diamond Output Power: 10W Battery Capacity: 1300mAh >75dB S/N: Frequency range: 40Hz-20KHz Lithium battery or USB cable Power supply: iPhone, iPad, Smartphone, Notebook, MP3, MP4, etc Audio source: Bluetooth, Microphone, Line-in Function spec: 120mm x 70mm x 56mm Size: Rechargeable battery can be charged by USB cable Operating range up to 20 meters 1. Introduction Thank you for purchasing the Diamond Audio system-a music player, an innovative portable Bluetooth speaker with built-in battery. This device can be easily connected with audio or video devices for your traveling and daily needs. The BT Speaker supports both Bluetooth and Aux-in function. -2- 2. Battery Precautions The device can be powered by built-in rechargeable lithium battery. Please charge the battery for at least 8 hours before your first use of device. If the device is not used for a long period of time, the battery may be out of power. Please charge the battery. Rechargeable batteries are only to be charged under adult supervision. Use only the supplied USB micro cable to recharge the battery. Improper charging may damage the battery and the device. Do not attempt to open the rechargeable battery or battery pack. There are no serviceable parts inside. Should a battery leak, the device may become damaged. Clean the battery compartment immediately, avoiding touching your skin. Keep the battery out of reach of children. If swallowed, consult a physician immediately. Avoid storing the battery in extremely hot or cold environment. A device with a hot or cold battery may not work temporarily, even when the battery is fully charged. Do not dispose batteries in a fire as they may explode. Batteries may also explode if damaged. Please dispose them according to local regulation. Do not dispose them as household waste. -3- 3. Getting Started General controls Play/Pause MIC Previous Next Volume Down Volume UP Bluetooth pairing key AUX Power switch Micro USB/Only for Charging. -4- 4. Cable Connection 3.5mm stereo jack 5. Bluetooth Connection and disconnection Pairing Diamond with your smartphone ( should be within 20 meters) a. Activate pairing mode on Diamond by switching “ON/OFF” button to “ON”. The LED will flash in red and blue color. b. On your speaker, navigate to the Bluetooth function (refer to the tablet owner’s manual to locate Bluetooth function). c. Select “Set Up” Bluetooth or turn “ON” Bluetooth. d. Select “Search” or “Discover” devices. e. Select “Bluetooth”. f. If requested, type the password or PIN 0000 g. Press the Enter key. -5- After completing the steps above, a message on your smartphone will appear cofirming that your device is now . paired/connected. then you will see the blue LED light stay solid, which means that this speaker pairs with your smartphone succeessfully. In case of unsuccessfully pairing, push this speaker to “OFF” and restart it to “ON” Notice: 1. If you turn off the speaker but the Bluetooth on your smartphone remains open, when you restart it, the Bluetooth will be connected automatically. 2. When your smartphone and this speaker beyond the Bluetooth receiving range. This speaker will diconnect with your smartphone and turn into paring mode. If within 10 minutes your smartphone is back, will connect with this speaker automatically. 3. If long press “ ”,the speaker will be disconnected and ready to pair with other smartphones. -6- 6. NFC Connection NFC: Near Field Communication, is a set of standard for Smartphone and this speaker to establish Bluetooth radio communication with each other by touching them together or bringing them into close proximity, usually no more than a few centimeters. Please activate the NFC function (subjects to tablets own setting) of your Bluetooth device. Bring your Bluetooth device close to speaker, as above picture. Your Bluetooth device will ask you whether you want to pair the speaker, confirm “Yes” or “OK”, then the pairing process is completed. 7. Microphone usage When a phone call comes in, you could talk through the microphone on speaker. 8. LED Display Status LED color Red/ Blue light LED Display Light indication Red & Blue flash alternatively ready to pair Blue light stay solid paired Green Light stay solid stay solid Flash off Line-in charging Red Light Low battery Full charged -7- 9. Battery Charging The device has built-in rechargeable lithium battery that can be charged by connecting to the USB port of your computer or into an AC adapter with USB port. When charging is completed, the red light will go off. 10. Product care Your device is designed be portable, as an electronic device and it must be treated carefully. Putting unnecessary pressure on it or striking the device against other objects may cause damage. Do not drop, crush, or apply excessive force to the device. Do not expose your device to moisture, extreme or prolonged heat, cold, humidity, or other adverse conditions. Avoid storing it in damp, humid or wet places. As it is not waterproof. Clean the unit with a soft cloth or damp chamois leather. Never use solvents. The unit can only be opened by qualified person. This device contains magnets. Keep magnetic field such as credit cards and video screen away from this device to avoid damage or malfunction. -8- FCC Statement: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: • Reorient or relocate the receiving antenna. • Increase the separation between the equipment and receiver. • Connect the equipment to an outlet on a circuit different from that to which the receiver is connected. This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Note: Modifications to this product will void the user’s authority to operate this equipment.
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.6 Linearized : No XMP Toolkit : Adobe XMP Core 5.2-c001 63.139439, 2010/09/27-13:37:26 Format : application/pdf Title : Diamond manual with NFC without voice guaidance Metadata Date : 2015:07:31 10:30:55+08:00 Modify Date : 2015:07:31 10:30:55+08:00 Create Date : 2014:06:10 17:10:26+08:00 Creator Tool : Adobe Illustrator CS6 (Windows) Thumbnail Width : 256 Thumbnail Height : 88 Thumbnail Format : JPEG Thumbnail Image : (Binary data 5688 bytes, use -b option to extract) Instance ID : uuid:a918b1b8-3008-4be4-aaee-bc723593421e Document ID : xmp.did:2D0E50977EF0E3118B19E7720EFE3FEB Original Document ID : uuid:5D20892493BFDB11914A8590D31508C8 Rendition Class : proof:pdf Derived From Instance ID : uuid:faf0329a-c350-4c87-aaf8-f2e5f123e088 Derived From Document ID : xmp.did:FFD4E886B6B4E311BDB191415F05DCF2 Derived From Original Document ID: uuid:5D20892493BFDB11914A8590D31508C8 Derived From Rendition Class : proof:pdf History Action : saved, saved History Instance ID : xmp.iid:EBE71C198813E3118B3FBE09B19A1BF7, xmp.iid:2D0E50977EF0E3118B19E7720EFE3FEB History When : 2013:09:02 12:28:20+08:00, 2014:06:10 17:10:20+08:00 History Software Agent : Adobe Illustrator CS6 (Windows), Adobe Illustrator CS6 (Windows) History Changed : /, / Manifest Link Form : EmbedByReference Manifest Reference File Path : C:\Users\ye\Desktop\DSC_1549.png Startup Profile : Print Has Visible Overprint : False Has Visible Transparency : True N Pages : 1 Max Page Size W : 67.000217 Max Page Size H : 109.999832 Max Page Size Unit : Millimeters Font Name : Arial-Black, ArialMT, Arial-BoldMT, MicrosoftNewTaiLue, TimesNewRomanPS-BoldMT, AdobeSongStd-Light Font Family : Arial, Arial MT, Arial MT, Microsoft New Tai Lue, Times New Roman, Adobe 宋体 Std Font Face : Black, Regular, Bold, Regular, Bold, L Font Type : Open Type, Type 1, Type 1, Open Type, Open Type, Open Type Font Version : Version 2.35, 001.001, 001.001, Version 5.90, Version 5.07, Version 5.017;PS 5.002;hotconv 1.0.67;makeotf.lib2.5.33168 Font Composite : False, False, False, False, False, False Font File Name : ariblk.ttf, _A______.PFB; _A______.PFM, _AB_____.PFB; _AB_____.PFM, ntailu.ttf, timesbd.ttf, AdobeSongStd-Light.otf Plate Names : Cyan, Magenta, Yellow, Black Swatch Groups Colorants Tint : 100.000000 Swatch Groups Group Name : 明亮 Swatch Groups Group Type : 1 Swatch Groups Colorants Swatch Name: C=60 M=90 Y=0 K=0 Swatch Groups Colorants Mode : CMYK Swatch Groups Colorants Type : PROCESS Swatch Groups Colorants Cyan : 60.000004 Swatch Groups Colorants Magenta : 90.000000 Swatch Groups Colorants Yellow : 0.003099 Swatch Groups Colorants Black : 0.003099 Producer : Adobe PDF library 10.01 Page Count : 10 Creator : Adobe Illustrator CS6 (Windows)EXIF Metadata provided by EXIF.tools