MeiDong Acoustics E-2 Bluetooth Headphone User Manual E 2

Shenzhen MeiDong Acoustics Co., LTD Bluetooth Headphone E 2

User Manual

User’s Guide
Please read the following safety warnings and precaution before using your device.234566788810. Product careContents-1-1. Introduction2. Battery Precautions3. Getting Started4. Installation Operation5. Cable Connection6. Bluetooth Connection7. Function Guidance8. LED Display Status9. Battery Charging
E-2Thank you for purchasing our Bluetooth headphone: E-2. This device can be easily connected with Smartphone, tablet PC and other devices via Bluetooth during your traveling and daily usage. It will bring you an easy lifestyle.Load impedance: 32ΩS/N: ≥85dBFrequency range: 20Hz-20KHzPower supply: Lithium battery or USB cableAudio source: iPhone, iPad, Smartphone, Notebook, MP3, MP4, etcFunction spec: Bluetooth, Microphone, Size: 156x73x97mm Operating range up to 10 meters.-2-1. IntroductionSpecification
The device is powered by a built-in rechargeable lithium battery. If the device is not used for a long period, the battery may be out of power. Please charge the battery before using.Rechargeable batteries are only to be charged under adult supervision. Use only the supplied cable to charge the battery. Improper charging may damage the battery and the device.Do not attempt to open the rechargeable battery or battery pack. There are no serviceable parts inside.Should a battery leak, the device may become damaged. Clean the battery compartment immediately, avoiding touching your skin.Keep the battery out of reach from children. If swallowed, consult a physician immediately.Don't dispose battery in fire as it may explode. Battery may also explode if damaged. Please dispose it according to local regulation, don't dispose it as household waste.-3-2. Battery Precaution
General controlsChargeMICON/OFFVolume Up/NextPlay/Pause, Answer callVolume Down/Previous-4-3. Getting Started
Step . 1 Step . 2Step . 3It can be adjusted To be fit by twisting the left and right ear muffs.Adjustable lengthput on this headphoneAdjustable angle-5-4. Installation Operation
USBAfter completing the steps above, a message on your Smart device will appear confirming that your device is now paired/ connected.In case of unsuccessful pairing, turn off it and restart it, then do as steps above. If you turn off the device, but the Bluetooth on your tablet remains open, when you restart the device, the Bluetooth will be connected automatically.for power2. Turn on your device, navigate to the Bluetooth function (refer to the device owner’s manual to locate Bluetooth function).3. Select “Set Up” Bluetooth or turn “ON” Bluetooth.4. Select “Search” or “Discover” devices.5. Select “Bluetooth”.6. If requested, type the password or PIN 00007. Press the Enter key.6. Bluetooth ConnectionPairing headphone to your Smart device (Smart device should be within 10 meters of your headphone).1. Activate pairing mode on headphone by long pressing” ON/OFF” button until you hear two kinds of short music. The LED will flash in blue and red.-6-5. Cable Connection
Answer /end a callPress “ ” (the middle button)to answer or end a call.7. Function GuidanceButton Operation FunctionLong Press Volume upShort Press Next songLong Press Volume downShort Press Previous songShort Press Play/Pause, Answer/End a callLong press Ready for pairingPlay music from your phone -7-LED DisplayFlash quicklyFlash twiceAlternativelyStay solidOFFLight indicationPower ONPairedReady to pairCharging in processFully chargedBlue LightBlue/Red Red Light8. LED Display Status
10. Product careYour device is designed to be light, compact and durable. As an electronic device it must be treated carefully. Putting unnecessary pressure on it or striking the device against other objects may cause damage. To avoid damage to your device, pleaseDo not drop, crush, bend or apply excessive force to the device.Do not expose your device to moisture, extreme or prolonged heat, cold, humidity, or other adverse conditions. Avoid storing it in damp, humid or wet places, as it is not waterproof.Clean the unit with a soft cloth or damp chamois leather. Never use solvents. This device contains magnets. Keep magnetic field sensitive products such as credit cards and video screen away from this device to avoid damage or malfunction.9. Battery ChargingThe device has a built-in rechargeable battery. This can be charged by USB cable connected with your computer. When it’s charging, the light below the left button will turn to redAfter charging, the device can be used without the power connection. Charge the device again when you hear the headphone make successive beep sound.-8- The Unit can only be opened by qualified personnel.
FCC NOTE： This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. THE MANUFACTURER IS NOT RESPONSIBLE FOR ANY RADIO OR TV INTERFERENCE CAUSED BY UNAUTHORIZED MODIFICATIONS OR CHANGE TO THIS EQUIPMENT. SUCH MODIFICATIONS OR CHANGE COULD VOID THE USER’S AUTHORITY TO OPERATE THE EQUIPMENT.

Navigation menu