MeiDong Acoustics MAGIC Bluetooth speaker User Manual Manual of Magic II NFC

Shenzhen MeiDong Acoustics Co., Ltd. Bluetooth speaker Manual of Magic II NFC

Contents

User Manual (statements)

Magic
1. Introduction2.Battery Precautions3.Getting Started4.Bluetooth Connection5.NFC Connection6.Functions 7.LED Display Status8.Microphone Usage9.Battery and Wireless Charging10.Product CarePlease read the following safety warnings and precautions before using your device.Contents-1-
-2-1. IntroductionPower Output: 35W Bluetooth SubwooferMaster: Magic, 10W stereo speakerSlave: Subwoofer, 25WS/N: >85dBFrequency Range: 20Hz-20KHzPower Supply: DC adapter for slave,wireless charge or USB cable for MasterAudio Source: iPhone, iPad, Smartphone, Notebook, MP3, MP4, etc Functions: Bluetooth, Microphone, Line in, wireless ChargingSize: Master: 200mm X 64mm X 60.7mm Slave: 300mm X 144mm X 166mmMaster (Magic) can be charged by USB cable or by Slave wirelessly. Slave (Subwoofer) is not rechargeable.SpecificationsOperating range: Smartphone to Master: from 10 to 20 meters, Slave: from 10 to 20 meters, due to different environmentThank you for purchasing the Magic II. This device can be easily connectedto your smartphone, Tablet PC and other devices via Bluetooth or audiocable.Magic　
2. Battery Precautions-3-Master can be powered by a built-in rechargeable lithium battery. Pleasecharge the battery at least 8 hours before your first use of device. If thedevice is not used for a long period of time, Please charge the battery.Use only the supplied USB micro cable to recharge the battery. Impropercharging may damage the battery and the device.Do not attempt to open the rechargeable battery or battery pack. There is notserviceable part inside.Should a battery leak, the device may become damaged. Clean the batterycompartment immediately, Avoid it touching your skin.Keep the battery out of reach of children. If swallowed, consult a physicianimmediately.Avoid storing the battery in extreme hot or cold environments. A device witha hot or cold battery may not work temporarily, even when the battery is fullycharged.Do not dispose batteries in a fire as they may explode. Batteries may alsoexplode if damaged. Please dispose of them according to local regulations.Do not dispose them as household waste.
3. Getting StartedGeneral controls-4-LEDON/OFFAUX jackUSB portON/OFFDC Adapter jackDC_15V/2AMasterVolume DownPreviousNextPlay / Pause; Answer / End a callVolume UpNFCMICSlave
4. Bluetooth Connection-5-The Magic II can be used in two ways :1. Use both the Master and Slave.Pair Magic II to your smart device ( keep pairing distance with 10meters )Generally speaking, the Master and Slave are connected before packaing. They will connect automatically when you open both of them.The master and slave connect automatically, how to connect the Master with your device:1. Select "Set Up" Bluetooth or turn "on" Bluetooth on your device.2. Select "search" or "Discover" devices3. Select "Magic II"4. If requested, type the password 0000.5. Press the Enter keyAfter completing the steps above, a message on your device will appear confirming that your device is now paired /connected.In case of unsuccessful pairing, Press “ ” to turn off the device and restart them2. Use the Master especially when you are outside.
Notice:If you turn off the device, but the Bluetooth on your smart phone remains open, when you restart the device, the Bluetooth will be connected automatically.When your smartphone and this speaker are apart beyond bluetooth receiving range, after 10 minutes, this speaker will disconnect with your smartphone and turn into pairing mode. If within 10 minutes your smartphone is back, It will connect with this speaker automatically.If long press “ ” buttom, the speaker will be disconnected and ready to pair with other smartphones.Disconnected, connect the Master with Slave first:If the Master and Slave were disconnected, please connect it as following: 1. Connect the Slave via DC adapter.2. Short press Slave ON/OFF button until the light flashes slowly in blue then release it.3. Short press ON/OFF button again until the light flashes quickly in blue then release it.4. Long press ON/OFF button of Master until the light flashes slowly in blue then release it.5. Long press ON/OFF button again until you hear two beeps then release it.6. Wait a while until the light of the master/slave turn solid blue. Now the two speakers are paired.In case of unsuccessful pairing, Press “ ” to turn off the device and restart process .-6-
-7-5. NFC ConnectionPlease activate the NFC function (subject to tablets own setting) on yourbluetooth device. Bring your device close to the speaker, (as abovepicture).Your bluetooth device will ask you whether you want to pair the speaker,confirm by “Yes” or “OK”, then the pairing process is completed.NFC: Near Field Communication, is a set of standards for Smartphones and this speaker to establish Bluetooth radio communication with each other by touching them together or bringing them into close proximity, usually no more than a few centimeters.6. Function GuidanceButton FunctionVolume upVolume downNext songPrevious songPlay/Pause/Answer/End a callPlay music from your Magic II.
7. LED Display Status LED DisplayMasterRed LightSolidOffFlash quicklyBlue Light FlashSolidSlave Blue LightSolidFlash slowlyFlash quicklyLight indicationChargingFully chargedLow batteryReady to pairReady to pair or disconnect with SlaveAonnectedPaired with MasterDisconnect with Master8. Microphone UsageWhen a phone call comes in, press the pause button, you can now talkthrough the microphone on the speaker.-8-
-9-9. Battery and Wireless Charging ࡨ۞͹ҭऄગוબ঺էݢݹҭऄͫબԓࠦէݢݹҭऄ͠ࡨ۞͹ҭऄગוબ঺էݢݹҭऄͫબԓࠦէݢݹҭऄ͠Charge for smartphoneࡨ۞͹ҭऄગוબ঺էݢݹҭऄͫબԓࠦէݢݹҭऄ͠The Master has a built-in rechargeable lithium battery that can be charged bySlave or USB port.When it’s charging, the light will turn red.The Slave can support power to the Master and Smart phone by wireless.Put the Master onto the Slave for charging (to avoid the Master slipping,a non-slip mat can be used)
10. Product careYour device is designed to be, powerful and durable. As an electronic device, it must be treated carefully. Putting unnecessary pressure on it or striking the device against other objects may cause damage. To avoid damage to your device :Do not drop, crush, bend or apply excessive force to the device.Do not expose your device to moisture, extreme or prolonged heat, cold, humidity, or other adverse conditions. Avoid storing it in damp, humid or wet places. It is not waterproof.Clean the unit with a soft cloth or damp chamois leather. Never use solvents.The Unit can Only be opened by qualified personnel.This device contains magnets. Keep magnetic field sensitive products such as credit cards and video screen away from this device to avoid damage or malfunction.-10-
FCC Information and Copyright This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: —Reorient or relocate the receiving antenna. —Increase the separation between the equipment and receiver. —Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.—Consult the dealer or an experienced radio/TV technician for help. 15.19 Labelling requirements.This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1)This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. FCC RF warning statement: the device has been evaluated to meet general RF exposure requirement , The device can be used in portable exposure condition without restriction.

Navigation menu