MeiDong Acoustics MD-6110 Bluetooth speaker User Manual

Shenzhen MeiDong Acoustics Co., LTD Bluetooth speaker

User Manual

MD-6110S/N:  Frequency range: Power supply: Audio source: Function spec: Size: >75dBLithium battery or USB cableiPhone, iPad, Smartphone, Notebook, MP3, MP4, etcBluetooth, Microphone, Line-in180mm x 55.2mm x 55.8mm1. IntroductionThank  you  for  purchasing MD-6110 This  device  can  be  easily connected with  audio  or  video devices for your daily needs. The MD-6110 speaker supports  both Bluetooth  and Aux-in function. Specification2. Battery PrecautionsThe device is power by a built-in rechargeable lithium battery. Please charge the battery at least 8 hours before your first use of device. If the device is not used for a long period of time, the battery may be out of power. please charge the battery. Rechargeable batteries are only to be charged under adult supervision.Do not attempt to open the rechargeable battery or battery pack. There are no serviceable parts inside.Should a battery leak, the device may become damaged. Clean the battery compartment immediately, avoiding contact with your skin.Keep the battery out of reach of children. If swallowed, consult a physician immediately. Avoid storing the  battery in extremely  hot or cold  environment. A device with a hot or cold battery may not work temporarily, even when the battery is fully charged. 3. Getting Started4. Cable Connection3.5mm stereo jackAUXTFUSBAUXMicro USB5. Bluetooth ConnectionPairing MD-6110 to your devise (devise should be within 10 meters of your speaker)Activate pairing  mode  on MD-6110 by  pressing “ON/OFF” button. After     prompt voice,   the  device is in pairing mode and can be searched. Navigate to the Bluetooth function (refer to the tablet owner’s manual to locate Bluetooth function).Select “Set Up” Bluetooth or turn “ON” Bluetooth.Select “Search” or “Discover” devices.Select “MD-6110” If requested, type the password or PIN 0000Press the enter key.After completing the steps above, a message on your devise will appear confirming that your device is now paired/connected.In case of unsuccessful pairing, turn off the speaker by long pressing “ ON/OFF” button and restart it.  If you turn off the device, but the Bluetooth on your devise remains open, when you restart the device, the Bluetooth will be connected automatically.1.2.3.4.5.6.7.Notice:1. If  you  turn  off  the  device,  but  the  Bluetooth  on  your  devise  remains open,  when  you  restart  the  device,  the  Bluetooth  will  be  connected automatically.2. When  your smartphone  and  this speaker  are apart  beyond  bluetooth receiving range, after  10  minutes, this speaker will disconnect  with  your smartphone  and  turn  into  pairing  mode.  If  within  10  minutes  your smartphone is back, will connect with this speaker automatically.6. Microphone Usage 8. FAQ&Customer SupportWhen  a  phone  call  comes  in,  you  could  talk  through  the  microphone  on speaker.Tips:When you make a call from your mobile phone the call will (subject to phone settings) automatically transfer to your MD-6110.Flash slowStay solidStay solidFlash fast Low batteryCharging in processFully chargedOFFGreen LightRed LightThe indicator light status display as below:LED Display Light IndicationReady to pairPaired Built-in  lithium  battery,can  be  charged  through  micro  USB  cable, see below picture:7. Charging and LED Indicator LightCharging by USBPCNotebookVolume Down Volume UPPlay/PauseNext PreviousMicrophone OFF/ONBluetoothFor Apple Mac.Please go to the bluetooth device list and if the MD-6110 is lited please remove it. With the MD-6110 removed or if was not listed, restart your Apple Mac and try again to pair and connect. For windows systems.Please go to the bluetooth device list and if the MD-6110 is lited please remove it. With the MD-6110 removed or if was not listed, restart your Apple Mac and try again to pair and connect. .If your windows system displays an error message requesting a driver. You need to update your computer’s bluetooth driver. The MD-6110 does not require a special driver itself and there is no driver for it. Go to the support site for your system manufacture and specific model and select the bluetooth driver. Download and install the bluetooth driver, restart your system and try again to pair and connect to your MD-6110 speaker.3-No audo playing from the MD-6110 when connect over bluetooth.Remove the MD-6110 from the bluetooth device list on your device, restart your device, and then re-pair and connect to the speaker. .Make sure the volume is up on your MD-6110 and your device..Make sure your bluetooth device is playing audio, and is not paused and volume is up..Your bluetooth device may be out of range, move closer within 30 unobstructed feet..Turn your MD-6110 off and back on.Some apps have their own volume setting. Please check the app to make sure the volume is not on mute and the volume is up.4-Poor sound quality when connect over bluetooth.Your bluetooth device may be out of range, move closer within 30 unobstructed feet..Remove the MD-6110 from the bluetooth device list on your souce device, restart your source device, and then re-pair and connectto the speaker.5-No audio playing from the MD-6110 when connected with the 3.5mm audio cable.Make sure the 3.5mm audio cable is fully inserted into the MD-6110 and device. Some devices have cases that prevent a proper fit and need to be removed to connect. Make sure your device is on and playing and music..Increase the volume level on the MD-6110 and the device.6-Poor soundquality when connected with the 3.5mm audio cable.Reduce the volume level on the AUX source..Remove the charging cable while playing.1- MD-6110 will not turn on.The battery may have become fully drained. Charge the MD-6110 using a USB wall charger from a smartphone/iPhone or table for at least 15 minutes, then press the power button to turn the speaker on. Then continue charging the battery.2-Cannot pair or connect to the MD-6110.Check that your MD-6110 has a sufficient battery charge, the speaker may not connect when the battery has a low charge. Connect the speakerto a charging source and try again to pair and connect..Your soure device may be out of range. Move it closer to within 30 unobstructed feet of your speaker..Check the bluetooth LED light to make sure it is flashing. If it is solid blue that MD-6110 is already connected to another device. The MD-6110 can be connected to one device at a time. You need to disconnect the connected device then you can connect to the next device. .Your device may have a temporary bluetooth connection issue please try the following steps which can resolve this:For iPhone, iPad, iPod, smartphone and tablets.Turn off the MD-6110 speaker, go to the bluetooth device list on your iPhone, iPad or iPod, smartphone or table and check if the MD-6110 is listed. If it listed press the bluetooth icon and then press unpair this device. With the MD-6110 unpaired or if it was not listed, do a hard restart on your smartphone or tablet. When it restarts turn on the MD-6110 and then try again to pair and connect. Please see instructions 5..Turn your MD-6110 off and back on..Some devices need to have their WIFI turned off to improve audio quality over bluetooth.ManualUserModel:MD-6110,MD-6110ABrand:COWINManufacture:Shenzhen MeiDong Acoustics Co., LTD2402-2480MHz
FCC Caution.  This  device  complies  with  part  15  of  the  FCC  Rules.  Operation  is  subject  to the  following  two conditions:   (1) This device may not cause harmful interference, and   (2)  this  device  must  accept  any  interference  received,  including  interference  that  may  cause undesired operation.  Any  Changes  or  modifications not expressly approved  by  the party responsible for compliance could void the user's authority to operate the equipment.  Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part  15 of  the  FCC Rules. These  limits are  designed to  provide reasonable protection  against  harmful  interference  in  a  residential  installation.  This  equipment  generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions,  may  cause  harmful  interference  to  radio  communications.  However,  there  is  no guarantee  that  interference  will  not  occur  in  a  particular  installation.  If  this  equipment  does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user  is  encouraged to try to correct the interference by one or more of the following measures: -Reorient or relocate the receiving antenna. -Increase the separation between the equipment and receiver. -Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. -Consult the dealer or an experienced radio/TV technician for help.  The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction.

Navigation menu