Mercury Innovations Science and Technology A10 Bluetooth Speaker User Manual Users manual

Shenzhen Mercury Innovations Science and Technology Ltd Bluetooth Speaker Users manual

Users manual

Bluetooth SpeakerA10USER MANUAL
LISTEN.MIFATHE MUSIC POWER TO YOUR DEEP HEART!MIFA W ECH ATMIFA A PPMIFA 电台/音乐/资讯 MIFA 官方微信www.mifa.net
Table of Contents01 - 09 English
Warnings01◆To ensure proper use and trouble-free operation, please carefully read this user manual first.◆For the first use, a full charge is recommended.◆Please use and store the product at room temperature.◆Do not throw and drop the product to avoid damages.◆Do not expose the product to fire, high temperature, direct sunlight, etc. ◆Do not use organic solvents or other chemicals to clean the product. ◆Do not allow small particles to get into the product.◆Please contact the seller if the cable is not matched.◆Please keep volumes of the speaker moderate to avoid temporary or permanent hearing impairment.◆Do not dissemble the product, or make any modifications to the structure or any parts of it.◆Keep the product out of children’s reach.English
Product Features02◎Wireless Bluetooth music playback◎Impressively clear and full-range sound◎Automatically connects to the last-connected device◎Aux-in jack and 3.5mm audio cable for non-Bluetooth devices◎Built-in Mic for hands-free calls◎Supports up to 32 GB Micro-SD card◎Supports MP3, WMA,WAV, FLAC, APE◎Automatically turns off after 10 minutes if there is no manual operation and no device connected◎Supports ring tong playing under IOS system ,others are default toneEnglish
1 × 3.5 mm Audio Cable1 × Micro USB Cable1 × A10 Bluetooth SpeakerPacking Contents031 × User Manual1 × Detachable StrapEnglishUser ManualWarranty Card 1 x Warranty card
Keys Functions04Volume Down ButtonShort press to decrease the volumeLong press to play the previous songVolume Up ButtonShort press to increase the volumeLong press to play the next songPlay / Pause ButtonShort press to pause or playBluetooth Button• When a call coming, short press to answer or hang up; long press to reject• Press and hold the button for 2 seconds to disconnect the paired device. The speaker enters pairing mode. To reconnect it to the last-connected device, short press it.English
Keys Functions05LED IndicatorPower Button• Press and hold the button for 2 seconds to turn on or turn off• Short press to switch the mode in the powered-on status• • If it is inserted with a Micro SD card or an audio cable, modes switch in turns: Bluetooth mode → Micro SD card mode or Aux-in mode• • If it is inserted with a Micro-SD card and an audio cable, modes switch in turns: Bluetooth mode → Micro SD card mode → Aux-in modeWhite light flashes after powered onWhite light stays on after connected to a deviceWhite light stays on while playingWhite light flashes slowly when playing is pausedWhite light flashes rapidly at the max / min volumeRed light stays on while charging; when fully charged, red light goes offBuilt-in MicEnglish
Ports Functions06MICROSDMicro SD Card SlotIn the powered-on state, insert a Micro-SD card into the slot. It will play the music stored in the card automatically after two beeps.Aux-in jack• In the powered-on state, insert an audio cable. It will beep to indicate a successful connection.• To reset the speaker, press the reset button in the jack with a needle.Micro USB port• Charging: use a DC 5V / 1A adaptor or connect it to a computer to charge the speaker• Data transmission: in the powered-off state, insert a Micro-SD card and connect it to a computer. Press and hold the power button for 2 seconds to turn it on. Then you can manage music files in the card on the computer.English
Bluetooth Connection071. Turn on the speakerPress and hold the power button for more than 2 seconds until it issues a sound of DingDong and then a sound of Ding with a flashing white LED light. It enters the pairing mode.2. Connect it to your deviceTurn on the Bluetooth of your device and select Mifa_A10. Once the connection is completed, it will beep and the white LED light will stay on. The speaker will connect to the last-connected • device automatically once the device's Bluetooth is turned on.Other Instructions To connect to another device, press and hold the • Bluetooth button for 2 seconds. The paired one will be disconnected and the speaker will enter the .pairing mode To reconnect it to the last used device, short press the • Bluetooth button.English
Specifications08Size: 6.0 × 2.6 × 2.5 in / 152 × 66 × 64 mmWeight: 12 oz / 341g (including the built-in Lithium battery)6.0 in 2.5 in2.6 in Basic ParametersSpeaker Type Portable Bluetooth SpeakerSpeaker System Dual-channel + BassActive / Passive ActiveBattery Built-in 2200 mAh Lithium batteryInput 5V / 1ASupported StorageUp to 32 GB Micro SD card (FAT32)About 3 hours with 1A output adapterCharging TimeSuppor ted Media TypeAPE\FLAC\WAV\WMA\MP3Bit RatePlaying ParametersMP3: 8Kbps-320KbpsWMA: 5Kbps-384KbpsOutput Power 2 × 5W, THD=3%Technical ParametersLoudspeakerFrequency Response50 Hz - 20 KHzUSB Standard USB 2.0 (compatible with U SB 1.1)APE: 100Kbps-1200KbpsFLAC: 100Kbps-1200KbpsWAV: 32Kbps-384KbpsDual 1.5 inches internal magnetic speakers + Low frequency amplifierEnglish
Trouble Shooting09Copyright © MIFA. All rights reserved.MIFA, the MIFA logo and other MIFA marks are all owned and registered by MIFA INNOVATIONS LLC. All other trademarks are the property of their respective owners. The information contained here is subject to change without prior notice.MIFA INNOVATIONS LLCwww.mifa.net Designed in USMade in ChinaNot able to connect to your deviceFAQ Solutions1. Restart the speaker and try again2. If your device requires a Pin Code, please enter 00001. Please ensure the format of the Micro SD card is FAT32. It only supports FAT32 Micro SD card2. Please ensure the formats of the music files are APE, FLAC, WAV, WMA or MP3No sound when playing1. Please adjust the volume of the speaker2. Please adjust the volume of your device3. Please check if the speaker is pausedKeeps cutting out when playing Please ensure the speaker is within the operating range and there are no obstacles between the speaker and the deviceNot able to play the music in Micro SD cardNo sound in AUX-in mode Please ensure the audio cable is connected wellNot able to turn on Please try to charge the speaker for about 3 hoursNo respond to any operation Please try to reset the speaker by pressing the reset button in the AUX-in jackEnglish
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not causeharmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.Any changes or modifications not expressly approved by the party responsible for compliancecould void the user's authority to operate the equipment.NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCCRules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipmentgenerates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may causeharmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation.If this equipment does cause harmful interference to radio or television reception,which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more ofthe following measures:-- Reorient or relocate the receiving antenna.-- Increase the separation between the equipment and receiver.-- Connect the equipment into an outlet on a circuit differentfrom that to which the receiver is connected.-- Consult the dealer or an experienced radio/TV technician for help.The device has been evaluated to meet general RF exposure requirement. The device can be used in portableexposure condition without restrictionFCC ID: 2AF7A-A10

Navigation menu