Mercury Innovations Science and Technology MIFAM1 bluetooth speaker User Manual

Shenzhen Mercury Innovations Science and Technology Ltd bluetooth speaker

User manual

19 English18 EnglishHold for 2 seconds to power on/offShort press to skip to the previous song, long press to decrease the volumeShort press mode key, change between Bluetooth mode, SD card mode(SD card music mode requiresa SD card inserting first) and USBsound card mode(connecting withcomputer with the cable)in turn.Short press to skip to the next song, long press to increase the volumeKeys FunctionMBluetooth disconnected or reconnect:Hands-free callShort press to answer or hang up the call, long press to reject the callShort press to play/pause music playIn the Bluetooth connection mode, long press to disconnect , short press again to reconnect the previous deviceJU S T EN J OYMBluetooth speaker User manual 17 EnglishUs er Ma nualWarranty Car d  Speaker 1pcUSB cable/data cable 1pcWhat's in the box 规格40x100MM 105克铜版纸封面专⾊Y012CPower on: Blue light flashing fast, ready for Bluetooth pairing, paired continuous bluePause: Blue light slow flashingCharging: Continuous red, die out while fully charged, while out of power, the red light flashing fastMax. volume: Blue LED light flashing fastPlaying mode: Blue LED light flickeringLED indicator20 English 21 EnglishChargeCharging with a DC5V~500mA USB adaptorData transferWhen the speaker power off, insert micro SD card, connect the speaker to computer,short press           key, voice prompt “Card Reader enabled” and then can copy or delete files from the micro SD card.Press the power button and insert the micro SD card, the speaker will say”SD card enabled”, and then the speaker will play the music in the SD card.Micro SD Music playReset button:Press to reset the deviceUSB sound cardPlay music stored in the computer through the speaker with the supplied cable by shorting press          key until you hear” Auxliary enabled”. Built-in microphoneM22 EnglishPower on the speaker after “Ding-dong” sound and “Bluetooth enabled”, blue light flickering ,allow pairing a Bluetooth device.If requires to connect other devices, press and hold          key to disconnect first and then the speaker is discoverable and ready to pair a new device.Turn on the Bluetooth device, set it to discover the “Mifa_M1”, once connected successfully, you will hear a sound and the LED light remains steadily on.The speaker will auto-connect the last paired device when it powers on.Bluetooth Connection23 EnglishTechnical parametersProduct size: W105×D64×H40mmProduct weight: 225glithium battery includedOutput Power 4Ω  3W x 2   THD=10%Frequency Response  60Hz~20KHzLoudspeakerBluetooth VersionUSB Specification Storage Type  Power Supply         File FormatAPE / FLAC / WAV / WMA / MP3Features·Bluetooth wireless music playing, hands-free function·One button Bluetooth reconnection, Micro SD card music playing·USB sound card and card reader functionM 1.5 inch + passive radiatorBluetooth 4.0Built-in 950 mAh Polymer battery DC5V-500mA USB adaptorMax. 32GB micro SD cardUSB 2.0 compatible with USB 1.1MI CR OSD24 English© MIFA all rights reserved .The product and the packaging trademarks or registered trademarks of MIFA INNOVATIONS LLC in the united states or other countries .All rights reserved . Other trademarks and trade names are registered mark of their respective owners . MIFA INNOVATIONS LLC for any errors that may occur in this manual does not undertake any responsibility. The information contained in this manual are subject to change no prior notice.MIFA INNOVATIONS LLC   Hotline:4007-881-899    www.mifa.net    Designed in US   Made in China Warnings◆Please use and store this product at room temperature Do not expose this product to rain or ◆wet conditions Do not throw and drop this product to ◆avoid product damage Do not self-dismantling ,repair and ◆transform the product Do not use chemical solvent cleaning ◆the product Please don’t arbitrarily discarded or ◆placed the lithium battery in the fire in order to avoid  the risk of explosion MThis device complies with part 15 of the FCC Rules. Operation is subject to the condition that this device does not cause harmful interference (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.Changes or modifications not expressly approved by the party responsible for compliancecould void the user's authority to operate the equipment.NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation.If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:-- Reorient or relocate the receiving antenna. -- Increase the separation between the equipment and receiver.-- Connect the equipment into an outlet on a circuit differentfrom that to which the receiver is connected. -- Consult the dealer or an experienced radio/TV technician for help.The device has been evaluated to meet gener al RF exposure requirement. The device can be  used in portable exposure condition without restriction. FCC ID: 2AF7A-MIFAM1

Navigation menu