Merrytek Technology MC609VRCA Lighting Control Switch User Manual
Shenzhen Merrytek Technology CO., LTD Lighting Control Switch
User manual
Shenzhen Merrytek Technology Co.,Ltd
Add: 2nd and 3rd floor, NO.3 Building, 380 Xiangshan Avenue, Luotian, Yanluo, Baoan, Shenzhen, 518127,China
Tel: +86 (0)755-2305 7253 Fax: +86 (0)755-2786 3012 Website: www.merrytek.com
Page 1 of 10
1. Features
SPECIFICATION
Product Name: Lighting Control Switch
Model No.:
MC609V RC A
Issue Date: March 28, 2018
CUSTOMER APPROVED
PRODUCT
DIRECTOR
APPROVED
SALES
CHECKED
R&D
CHECKED PREPARED
Shenzhen Merrytek Technology Co.,Ltd
Add: 2nd and 3rd floor, NO.3 Building, 380 Xiangshan Avenue, Luotian, Yanluo, Baoan, Shenzhen, 518127,China
Tel: +86 (0)755-2305 7253 Fax: +86 (0)755-2786 3012 Website: www.merrytek.com
Page 2 of 10
Operating voltage 120/277/347V AC, suitable to North American market.
Patented microwave antenna, mounting height is 15m Max, suitable to install in most of warehouses.
Work with 1-10V dimmable LED driver, easy to achieve 2-step or 3-step dimming function.
Work with remote controller MH01, easy to adjust sensor parameters.
2. Parameter
Input
Operating Voltage Rage 108-381V AC, 50Hz/60Hz
DC Input Voltage N/A
Rated Voltage 120/277/347Vac, 50/60Hz
No-load Power N/A
Stand-by Power <1.5W
Surge Test L--N: 2kV
Output
Working Mode ON/OFF function, 1-10V step dimming
Type of Load Inductive or Resistive Load
Load Capacity 120VAC: 3.6A; 277VAC: 3.4A; 347VAC: 3.3A
Current of Load N/A
Max. Surge Capacity 50A (50% Ipeak, twidth =500uS, 277Vac full load, cold start);
80A (50% Ipeak, twidth =200uS, 277Vac, full load, cold start）
Dim Interface
1-10V Dimming
< 50mA （Non-constant source）
10%(1.4-1.6V), 20%(1.9-2.1V),
30%(2.9-3.1V), 50% (4.9-5.1V)
Synchronous Control N/A
High Low-level N/A
PWM Control N/A
Sensor
Parameters
Operating Frequency 5.8 GHz ±75 MHz，ISM Band.
Transmitting power 0.5mW Max.
Hold time DIP switch: 5s/30s/1min/3min/20min/30min
Remote control: 5s/30s/1min/3min/5min/10min/20min/30min
Stand-by DIM Level DIP switch & Remote control: 10%/20%/30%/50%
Stand-by Period DIP switch: 0s/1min/3min/10min/30min/+∞
Remote control: 0s/10s/1min/3min/5min/10min/30min/+∞
Detection Area DIP switch: 100%/50%
Remote control: 25%/50%/75%/100%
Daylight Sensor DIP switch & Remote control:
5lux/15lux/30lux/50lux/100lux/150lux/Disable (Ambient light diffusion)
Daylight on/off N/A
Detecting Radius 5-8m (mounting height 8m) See note 2
Shenzhen Merrytek Technology Co.,Ltd
Add: 2nd and 3rd floor, NO.3 Building, 380 Xiangshan Avenue, Luotian, Yanluo, Baoan, Shenzhen, 518127,China
Tel: +86 (0)755-2305 7253 Fax: +86 (0)755-2786 3012 Website: www.merrytek.com
Page 3 of 10
Mounting Height 15m Max
Detecting Angle 150°(wall mounting) 360°(ceiling mounting)
Wireless
Module
Operating Frequency N/A
Transmitting power N/A
Transmitting distance N/A
Modulation mode N/A
Number of coding N/A
Operating
Environment
Operating Temperature -35 ℃…+55℃
Storage Temperature Temperature: -40℃…+80℃; Humidity: 10%-95% (non-condensing)
Certificate
Standards
Safety standards UL 60730
EMC standards FCC PART15
Environmental Requirement Compliant to RoHS
Certificate cULus
Others
Wiring Input: STW, 3*18AWG exposed line length: 810-830mm
1-10V DC: SJTW, 2*18AWG exposed line length: 810-830mm
IP Rating IP65
Protection Class Class II
Installation Independent
Dimension (ΦxH)72*59mm
Package Instruction+ White box+ White box tags+ Clapboard+ Carton(K=A)
Net Weight MC609V A: 315g, MC609V C:343g , MC609V D:175g
Lifetime 50,000h @ Ta Full load
Note
1. “N/A”means not available.
2. Detection area is effected on volume of motion object and motion speed. The detection area is tested by a 165cm height
person and walking speed is 0.5m/s.
Shenzhen Merrytek Technology Co.,Ltd
Add: 2nd and 3rd floor, NO.3 Building, 380 Xiangshan Avenue, Luotian, Yanluo, Baoan, Shenzhen, 518127,China
Tel: +86 (0)755-2305 7253 Fax: +86 (0)755-2786 3012 Website: www.merrytek.com
Page 4 of 10
3. Function
1) On/OFF Function (stand-by period be set to “0”s)
2) 2-step dimming function (stand-by period be set to “+∞”)
3) 3-step dimming function (stand-by period be set to “10s/1min/3min/5min/10min/30min”)
Shenzhen Merrytek Technology Co.,Ltd
Add: 2nd and 3rd floor, NO.3 Building, 380 Xiangshan Avenue, Luotian, Yanluo, Baoan, Shenzhen, 518127,China
Tel: +86 (0)755-2305 7253 Fax: +86 (0)755-2786 3012 Website: www.merrytek.com
Page 5 of 10
4. Dimension (mm)
1) Bottom hole mounting: MC609V RC A
5. Wiring
*The sensor is designed for connect one load only. Connect more than one loads may damage the sensor.
Shenzhen Merrytek Technology Co.,Ltd
Add: 2nd and 3rd floor, NO.3 Building, 380 Xiangshan Avenue, Luotian, Yanluo, Baoan, Shenzhen, 518127,China
Tel: +86 (0)755-2305 7253 Fax: +86 (0)755-2786 3012 Website: www.merrytek.com
Page 6 of 10
6. Structure
Shenzhen Merrytek Technology Co.,Ltd
Add: 2nd and 3rd floor, NO.3 Building, 380 Xiangshan Avenue, Luotian, Yanluo, Baoan, Shenzhen, 518127,China
Tel: +86 (0)755-2305 7253 Fax: +86 (0)755-2786 3012 Website: www.merrytek.com
Page 7 of 10
7. Remote Control
8. DIP Switch Setting
Detection Area (Sensitivity)
1
Ⅰ ON 100%
Ⅱ - 50%
Shenzhen Merrytek Technology Co.,Ltd
Add: 2nd and 3rd floor, NO.3 Building, 380 Xiangshan Avenue, Luotian, Yanluo, Baoan, Shenzhen, 518127,China
Tel: +86 (0)755-2305 7253 Fax: +86 (0)755-2786 3012 Website: www.merrytek.com
Page 8 of 10
Hold Time
2 3 4
Ⅰ ON ON ON 5s
Ⅱ - ON ON 30s
Ⅲ ON - ON 1min
Ⅳ - - ON 3min
Ⅴ ON ON - 20min
Ⅵ - - - 30min
Stand-by Period
1 2 3
Ⅰ ON ON ON 0s
Ⅱ - ON ON 1min
Ⅲ ON - ON 3min
Ⅳ - - ON 10min
Ⅴ ON ON - 30min
Ⅵ - - - +∞
Stand-by Dim Level
4 5 Brightness% Voltage of 1-10V interface
Ⅰ ON ON 10% 1.4-1.6V
Ⅱ ON - 20% 1.9-2.1V
Ⅲ - ON 30% 2.9-3.1V
Ⅳ - - 50% 4.9-5.1V
Shenzhen Merrytek Technology Co.,Ltd
Add: 2nd and 3rd floor, NO.3 Building, 380 Xiangshan Avenue, Luotian, Yanluo, Baoan, Shenzhen, 518127,China
Tel: +86 (0)755-2305 7253 Fax: +86 (0)755-2786 3012 Website: www.merrytek.com
Page 9 of 10
Daylight Sensor
6 7 8 9
Ⅰ ON ON ON ON 5Lux
Ⅱ - ON ON ON 15Lux
Ⅲ ON - ON ON 30Lux
Ⅳ - - ON ON 50Lux
Ⅴ ON ON - ON 100Lux
Ⅵ ON ON ON - 150Lux
VII - - - - Disable*
*Disable means the daylight sensor does not work. The sensor will turn on light once motion is detected regardless
of ambient light level.
Shenzhen Merrytek Technology Co.,Ltd
Add: 2nd and 3rd floor, NO.3 Building, 380 Xiangshan Avenue, Luotian, Yanluo, Baoan, Shenzhen, 518127,China
Tel: +86 (0)755-2305 7253 Fax: +86 (0)755-2786 3012 Website: www.merrytek.com
Page 10 of 10
FCC Warning:
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC
Rules.
These limits are designed to provide reasonable protection against harmful interference in a residential installation. This
equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the
following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
Caution:
Any changes or modifications to this device not explicitly approved by manufacturer could void your authority to operate this
equipment. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference.
(2) this device must accept any interference received, including interference that may cause undesired operation.
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment.
This equipment should be installed and operated with minimum distance 20cm between the radiator & your body.
ISED Statement
English: This device complies with Industry Canada license‐exempt RSS standard(s). Operation is subject to the following two
conditions: (1) This device may not cause interference, and (2) This device must accept any interference, including interference
that may cause undesired operation of the device. The digital apparatus complies with Canadian CAN ICES‐3 (B)/NMB‐3 (B).
French: Le présentappareilestconforme aux CNR d'Industrie Canada applicables aux appareils
radio exempts de licence. L'exploitationestautorisée aux deux conditions suivantes: (1) l'appareil ne doit pas produire de
brouillage, et (2) l'utilisateur de l'appareildoit accepter tout brouillageradioélectriquesubi, mêmesi le brouillageest susceptible
d'encompromettre le fonctionnement.
Radiation Exposure Statement
This equipment complies with Canada radiation exposure limits set forth for an uncontrolled environment. This equipment
should be installed and operated with minimum distance 20cm between the radiator & your body.
Déclaration d'exposition aux radiations
Cet équipement est conforme Canada limites d'exposition aux radiations dans un environnement non contrôlé. Cet
équipement doit être installé et utilisé à distance minimum de 20cm entre le radiateur et votre corps.