Merrytek Technology MC609VRCA Lighting Control Switch User Manual

Download:
Mirror Download [FCC.gov]
Document ID	4023049
Application ID	xWmVWe7qj9j/8h+0QSHWkw==
Document Description	User manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	159.25kB (1990612 bits)
Date Submitted	2018-09-28 00:00:00
Date Available	2018-09-28 00:00:00
Creation Date	2018-09-27 21:45:13
Producing Software	Adobe PDF Library 11.0
Document Lastmod	2018-09-27 21:45:19
Document Title	HC008S/H(改单片机) 半成品机检验测试规范
Document Creator	Acrobat PDFMaker 11 for Word
Document Author:	HDYF05

SPECIFICATION
Product Name:
Lighting Control Switch
Model No.:
MC609V RC
Issue Date:
March 28, 2018
CUSTOMER APPROVED
PRODUCT
DIRECTOR
APPROVED
SALES
CHECKED
R&D
CHECKED
PREPARED
1. Features
Shenzhen Merrytek Technology Co.,Ltd
Add: 2nd and 3rd floor, NO.3 Building, 380 Xiangshan Avenue, Luotian, Yanluo, Baoan, Shenzhen, 518127,China
Tel: +86 (0)755-2305 7253
Fax: +86 (0)755-2786 3012
Website: www.merrytek.com
Page 1 of 10

Operating voltage 120/277/347V AC, suitable to North American market.

Patented microwave antenna, mounting height is 15m Max, suitable to install in most of warehouses.

Work with 1-10V dimmable LED driver, easy to achieve 2-step or 3-step dimming function.

Work with remote controller MH01, easy to adjust sensor parameters.
2. Parameter
Operating Voltage Rage
108-381V AC, 50Hz/60Hz
DC Input Voltage
N/A
Rated Voltage
120/277/347Vac, 50/60Hz
No-load Power
N/A
Stand-by Power
<1.5W
Surge Test
L--N: 2kV
Working Mode
ON/OFF function, 1-10V step dimming
Type of Load
Inductive or Resistive Load
Load Capacity
120VAC: 3.6A; 277VAC: 3.4A; 347VAC: 3.3A
Current of Load
N/A
Input
Output
Max. Surge Capacity
50A (50% Ipeak, twidth =500uS, 277Vac full load, cold start);
80A (50% Ipeak, twidth =200uS, 277Vac, full load, cold start）
< 50mA （Non-constant source）
1-10V Dimming
10%(1.4-1.6V), 20%(1.9-2.1V),
30%(2.9-3.1V), 50% (4.9-5.1V)
Dim Interface
Synchronous Control
N/A
High Low-level
N/A
PWM Control
N/A
Operating Frequency
5.8 GHz ±75 MHz，ISM Band.
Transmitting power
0.5mW Max.
Hold time
Stand-by DIM Level
Stand-by Period
Sensor
Parameters
Detection Area
Daylight Sensor
DIP switch: 5s/30s/1min/3min/20min/30min
Remote control: 5s/30s/1min/3min/5min/10min/20min/30min
DIP switch & Remote control: 10%/20%/30%/50%
DIP switch: 0s/1min/3min/10min/30min/+∞
Remote control: 0s/10s/1min/3min/5min/10min/30min/+∞
DIP switch: 100%/50%
Remote control: 25%/50%/75%/100%
DIP switch & Remote control:
5lux/15lux/30lux/50lux/100lux/150lux/Disable (Ambient light diffusion)
Daylight on/off
N/A
Detecting Radius
5-8m (mounting height 8m) See note 2
Shenzhen Merrytek Technology Co.,Ltd
Add: 2nd and 3rd floor, NO.3 Building, 380 Xiangshan Avenue, Luotian, Yanluo, Baoan, Shenzhen, 518127,China
Tel: +86 (0)755-2305 7253
Fax: +86 (0)755-2786 3012
Website: www.merrytek.com
Page 2 of 10
Mounting Height
15m Max
Detecting Angle
150°(wall mounting) 360°(ceiling mounting)
Operating Frequency
N/A
Transmitting power
N/A
Transmitting distance
N/A
Modulation mode
N/A
Number of coding
N/A
Operating Temperature
-35
Storage Temperature
Temperature: -40℃…+80℃; Humidity: 10%-95% (non-condensing)
Safety standards
UL 60730
Certificate
EMC standards
FCC PART15
Standards
Environmental Requirement
Compliant to RoHS
Certificate
cULus
Wireless
Module
Operating
Environment
Wiring
Others
℃…+55℃
Input: STW, 3*18AWG exposed line length: 810-830mm
1-10V DC: SJTW, 2*18AWG exposed line length: 810-830mm
IP Rating
IP65
Protection Class
Class II
Installation
Independent
Dimension
(ΦxH)72*59mm
Package
Instruction+ White box+ White box tags+ Clapboard+ Carton(K=A)
Net Weight
MC609V A: 315g, MC609V C:343g , MC609V D:175g
Lifetime
50,000h @ Ta Full load
Note
1. “N/A”means not available.
2. Detection area is effected on volume of motion object and motion speed. The detection area is tested by a 165cm height
person and walking speed is 0.5m/s.
Shenzhen Merrytek Technology Co.,Ltd
Add: 2nd and 3rd floor, NO.3 Building, 380 Xiangshan Avenue, Luotian, Yanluo, Baoan, Shenzhen, 518127,China
Tel: +86 (0)755-2305 7253
Fax: +86 (0)755-2786 3012
Website: www.merrytek.com
Page 3 of 10
3. Function
1) On/OFF Function (stand-by period be set to “0”s)
2) 2-step dimming function (stand-by period be set to “+∞”)
3) 3-step dimming function (stand-by period be set to “10s/1min/3min/5min/10min/30min”)
Shenzhen Merrytek Technology Co.,Ltd
Add: 2nd and 3rd floor, NO.3 Building, 380 Xiangshan Avenue, Luotian, Yanluo, Baoan, Shenzhen, 518127,China
Tel: +86 (0)755-2305 7253
Fax: +86 (0)755-2786 3012
Website: www.merrytek.com
Page 4 of 10
4. Dimension (mm)
1) Bottom hole mounting: MC609V RC A
5. Wiring
*The sensor is designed for connect one load only. Connect more than one loads may damage the sensor.
Shenzhen Merrytek Technology Co.,Ltd
Add: 2nd and 3rd floor, NO.3 Building, 380 Xiangshan Avenue, Luotian, Yanluo, Baoan, Shenzhen, 518127,China
Tel: +86 (0)755-2305 7253
Fax: +86 (0)755-2786 3012
Website: www.merrytek.com
Page 5 of 10
6. Structure
Shenzhen Merrytek Technology Co.,Ltd
Add: 2nd and 3rd floor, NO.3 Building, 380 Xiangshan Avenue, Luotian, Yanluo, Baoan, Shenzhen, 518127,China
Tel: +86 (0)755-2305 7253
Fax: +86 (0)755-2786 3012
Website: www.merrytek.com
Page 6 of 10
7. Remote Control
8. DIP Switch Setting
Detection Area (Sensitivity)
Ⅰ
ON
100%
Ⅱ
50%
Shenzhen Merrytek Technology Co.,Ltd
Add: 2nd and 3rd floor, NO.3 Building, 380 Xiangshan Avenue, Luotian, Yanluo, Baoan, Shenzhen, 518127,China
Tel: +86 (0)755-2305 7253
Fax: +86 (0)755-2786 3012
Website: www.merrytek.com
Page 7 of 10
Hold Time
Ⅰ
ON
ON
ON
5s
Ⅱ
ON
ON
30s
Ⅲ
ON
ON
1min
Ⅳ
ON
3min
Ⅴ
ON
ON
20min
Ⅵ
30min
Ⅰ
ON
ON
ON
0s
Ⅱ
ON
ON
1min
Ⅲ
ON
ON
3min
Ⅳ
ON
10min
Ⅴ
ON
ON
30min
Ⅵ
+∞
Stand-by Period
Stand-by Dim Level
Brightness%
Voltage of 1-10V interface
Ⅰ
ON
ON
10%
1.4-1.6V
Ⅱ
ON
20%
1.9-2.1V
Ⅲ
ON
30%
2.9-3.1V
Ⅳ
50%
4.9-5.1V
Shenzhen Merrytek Technology Co.,Ltd
Add: 2nd and 3rd floor, NO.3 Building, 380 Xiangshan Avenue, Luotian, Yanluo, Baoan, Shenzhen, 518127,China
Tel: +86 (0)755-2305 7253
Fax: +86 (0)755-2786 3012
Website: www.merrytek.com
Page 8 of 10
Daylight Sensor
Ⅰ
ON
ON
ON
ON
5Lux
Ⅱ
ON
ON
ON
15Lux
Ⅲ
ON
ON
ON
30Lux
Ⅳ
ON
ON
50Lux
Ⅴ
ON
ON
ON
100Lux
Ⅵ
ON
ON
ON
150Lux
VII
Disable*
*Disable means the daylight sensor does not work. The sensor will turn on light once motion is detected regardless
of ambient light level.
Shenzhen Merrytek Technology Co.,Ltd
Add: 2nd and 3rd floor, NO.3 Building, 380 Xiangshan Avenue, Luotian, Yanluo, Baoan, Shenzhen, 518127,China
Tel: +86 (0)755-2305 7253
Fax: +86 (0)755-2786 3012
Website: www.merrytek.com
Page 9 of 10
FCC Warning:
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC
Rules.
These limits are designed to provide reasonable protection against harmful interference in a residential installation. This
equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the
following measures:
•
Reorient or relocate the receiving antenna.
•
Increase the separation between the equipment and receiver.
•
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
•
Consult the dealer or an experienced radio/TV technician for help.
Caution:
Any changes or modifications to this device not explicitly approved by manufacturer could void your authority to operate this
equipment. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1)
This device may not cause harmful interference.
(2)
this device must accept any interference received, including interference that may cause undesired operation.
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment.
This equipment should be installed and operated with minimum distance 20cm between the radiator & your body.
ISED Statement
English: This device complies with Industry Canada license‐exempt RSS standard(s). Operation is subject to the following two
conditions: (1) This device may not cause interference, and (2) This device must accept any interference, including interference
that may cause undesired operation of the device. The digital apparatus complies with Canadian CAN ICES‐3 (B)/NMB‐3 (B).
French: Le présentappareilestconforme aux CNR d'Industrie Canada applicables aux appareils
radio exempts de licence. L'exploitationestautorisée aux deux conditions suivantes: (1) l'appareil ne doit pas produire de
brouillage, et (2) l'utilisateur de l'appareildoit accepter tout brouillageradioélectriquesubi, mêmesi le brouillageest susceptible
d'encompromettre le fonctionnement.
Radiation Exposure Statement
This equipment complies with Canada radiation exposure limits set forth for an uncontrolled environment. This equipment
should be installed and operated with minimum distance 20cm between the radiator & your body.
Déclaration d'exposition aux radiations
Cet équipement est conforme Canada limites d'exposition aux radiations dans un environnement non contrôlé. Cet
équipement doit être installé et utilisé à distance minimum de 20cm entre le radiateur et votre corps.
Shenzhen Merrytek Technology Co.,Ltd
Add: 2nd and 3rd floor, NO.3 Building, 380 Xiangshan Avenue, Luotian, Yanluo, Baoan, Shenzhen, 518127,China
Tel: +86 (0)755-2305 7253
Fax: +86 (0)755-2786 3012
Website: www.merrytek.com
Page 10 of 10

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.5
Linearized                      : Yes
Author                          : HDYF05
Category                        : 
Comments                        : 
Company                         : China
Create Date                     : 2018:09:27 21:45:13+08:00
KSO Product Build Ver           : 2052-10.8.0.5562
Manager                         : 
Modify Date                     : 2018:09:27 21:45:19+08:00
Source Modified                 : D:20180921121532
Subject                         : 
Language                        : EN-US
Tagged PDF                      : Yes
XMP Toolkit                     : Adobe XMP Core 5.4-c005 78.147326, 2012/08/23-13:03:03
Metadata Date                   : 2018:09:27 21:45:19+08:00
Creator Tool                    : Acrobat PDFMaker 11 for Word
Document ID                     : uuid:396ca8ca-1b64-4818-876a-78538685ad47
Instance ID                     : uuid:4373c070-27e2-4aca-aace-9b6cd0e38e47
Format                          : application/pdf
Title                           : HC008S/H(改单片机) 半成品机检验测试规范
Description                     : 
Creator                         : HDYF05
Producer                        : Adobe PDF Library 11.0
Keywords                        : 
Page Layout                     : OneColumn
Page Count                      : 10

EXIF Metadata provided by EXIF.tools