Metering Technology RFLAN RFLAN Module User Manual process format

Download:
Mirror Download [FCC.gov]
Document ID	288802
Application ID	0QXdv8QzaQaBwuarFGRMaw==
Document Description	Assembly Instructions
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	11.37kB (142125 bits)
Date Submitted	2002-12-10 00:00:00
Date Available	2002-12-12 00:00:00
Creation Date	2002-12-09 22:27:41
Producing Software	Acrobat Distiller 5.0.5 (Windows)
Document Lastmod	2002-12-10 01:34:06
Document Title	process document format
Document Creator	Acrobat PDFMaker 5.0 for Word
Document Author:	JFM

FCC ID PDVRFLAN
Tested and Report Prepared By:
ITC Engineering Services
9959Calaveras Road, Box 543
Sunol, CA 94586-0543
Tel: 925-862-2944
Fax: 925-862-9013
Email: docs@itcemc.com
Web: www.itcemc.com
MTC CONFIDENTIAL INFORMATION
PRODUCT:
ASSSEMBLY PART NUMBER:
REV:
Puma
ASSEMBLY INSTRUCTION
FOR
LAN Radio and Meter
ASSY# PRD0900
CREATED BY:
DATE:
Kent Vogel
11/12/02
APPROVED:
DATE:
Carlos Cuturrufo
02
APPROVED:
DATE:
QA:
DATE:
11/12/02
FORM: xxxxxxxxxxxx
Scotts Valley, CA
02
Kent Vogel
DATE:
METERING TECHNOLOGY
CORPORATION
DOCUMENT NUMBER:
ASI0021
REVISION:
PAGE
OF
FCC ID PDVRFLAN
Tested and Report Prepared By:
ITC Engineering Services
9959Calaveras Road, Box 543
Sunol, CA 94586-0543
Tel: 925-862-2944
Fax: 925-862-9013
Email: docs@itcemc.com
Web: www.itcemc.com
MTC CONFIDENTIAL INFORMATION
PRODUCT:
ASSSEMBLY PART NUMBER:
REV:
Puma
DOCUMENT REVISION HISTORY
DOC
REV
REASON FOR CHANGE
Initial Release
DESCRIPTION OF CHANGE
DATE
Release of Instruction
11-12-2002
Procedure:
1. Place the meterboard on the top of the base assembly. Attach the power connector
assembly, CT connector assembly, and battery to the meterboard. Snap the meterboard
onto the base skirt.
2. Attach the display bracket to the top of the board. Install the flex cable from the LCD
to the meterboard, then snap the LCD into the display bracket.
3. Install the LAN radio card to the side of the base skirt using the plastic plunger rivets.
4. Install the LAN antenna board to the display bracket using the pine tree rivets.
5. Connect the flex circuit between the LAN radio and the meterboard.
6. Solder the coax cable between the LAN antenna and the LAN radio.
7. Install the cover seal to the base rib.
8. Place the bezel over the meter base and align the slots so that it snaps into place onto
the base skirt.
9. Add label with the following notation: « Contains FCC ID: PDVRFLAN », MTC p/n.
XXXXXXXXX to the top surface of the meter bezel
10. Install the cover assembly as the final step to the meter.
DATE:
11/12/02
FORM: xxxxxxxxxxxx
DOCUMENT NUMBER:
ASI0021
REVISION:
PAGE
OF

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.4
Linearized                      : No
Encryption                      : Standard V1.2 (40-bit)
User Access                     : Print, Fill forms, Extract, Assemble, Print high-res
Modify Date                     : 2002:12:10 01:34:06-08:00
Create Date                     : 2002:12:09 22:27:41-08:00
Page Count                      : 2
Creation Date                   : 2002:12:09 22:27:41-08:00
Mod Date                        : 2002:12:10 01:34:06-08:00
Producer                        : Acrobat Distiller 5.0.5 (Windows)
Author                          : JFM
Metadata Date                   : 2002:12:10 01:34:06-08:00
Creator                         : JFM
Title                           : process document format
Page Mode                       : UseNone
Tagged PDF                      : Yes

EXIF Metadata provided by EXIF.tools