Micro Star Electronic Technology DBM5 Video Doorbell User Manual

Shenzhen Micro Star Electronic Technology Co., Ltd. Video Doorbell

User manual

Page 1 of 5Add the camera Seup the CameraBefore you begin…> Make sure the HKbell app is installed to your device.> Make sure that your device is connected to a 2.4GHz Wi-Fi network, NOT a 5GHz network.1.) Launch the HKbell app on your device and tapAdd a Camera.2.) Select Setup Camera.Note: If you have multiple cameras, only setupone at a time.Smart Wi-Fi Doorbell APP Easy Setup GuideThank you for choosing our products! Please follow the below instruction to setup and using yourdoorbell device.1. Downloading and Installing the App.Open the App Store (for iOS) or the Google Play Store(for Android) on your mobile devices.Search for "HKbell" or scan the following QR Code to download and install to your device.2. Setting up the App
Page 2 of 53.) Before setup, make sure the device is inconfiguration --- with a voice prompt "The camerais now ready to begin pairing".4.) If you didn't hear the voice prompt, pressand hold the reset button for 5 seconds.Release after the LED indicator turnned off ,and the device will restart to configureautomatically.5.) The name of the Wi-Fi network willautomatically be filled in, enter the Wi-Fipassword. And adjust the volume of your deviceto a reasonable level then tap "Next". The APPwill fill the corresponding password automaticallyif connected with the same Wi-Fi, and you don'tneed to fill the password again.6.) The mobile device will emit sound waves,keep quiet and make sure about 30cm distancebetween the phone and the device , andwaitting for the device to configure thenetwork.If your camera fails to connect, reset thecamera and repeat all the steps(please see theprevious section, Resetting the Camera)
Page 3 of 57.) After a successful connection, you will beprompted to create a name and password foryour camera. The password must be at least 8characters and include letter and a number.8.) Setup completed! The APP will be enteredthe device list interface automatically.Congratulations! The device is ready for use.2. Cloud storageThen Switch change cloud storageCloud storage instructions: equipment in a dormant state, PIR wake up or press the doorbell button,device will automatically upload 8 seconds of video to the cloud storage , Each device can record 20events videos every day and provide cycle video space a week and flow ,for users free use foreverDevice Settings menu, Find "SD card " then open cloud storage Settings
Page 4 of 5Click the calendar icon then you can saw which day video Click video you wanna Accept callShare QR CodeDelete cameraThe mobile device will not receive thenotifications after you delete the camera. Butthe camera still works and the otherconnected mobile devices still able to receivethe notifications.4.The Wi-Fi Doorbell FeaturesIn the device list section, please click settings icon which at the top right corner to enter the Send the QR code to share the device to yourfriends and family or someone that you wantto share.Turn on - Receive the notification ifsomebody press the doorblle or call out.Turn off - Will not receive the notifications
Page 5 of 5PIR Detection InstructionsThe device can support the PIR detection. Tap "PIR detection" to open the submenus.High - 5.Note for using1.) The device is powered by rechargeable lithium batteries. With fully charged, the battery lifeapprox be six months. The mobile device APP will be prompted while the battery voltage is low.Please charge the device after received the reminder.2.) Keep the camera in range of your router.Make sure to pick a place within range of your network. Thick or insulated doors can greatlyreduce the strength of your Wi-Fi signal even if your router is close by, so you should trystreaming video before you mount your camera.3.The device is a low power consumption intelligent products, can support remote wake up fromthe APP, PIR human detection, press doorbell wake up. The device will be works for 20 secondsafter wake up then be in the resting state automatically and until to next waking up.In the state, the device will be able to detectif keep the state what be detected at least 1minutes, and the device start to take videosand call to phones at the same time.Note: In crowded environment, it isrecommended to close or set the device to lowsensitivity to reduce device arousal and calltimes to extend battery life.Disabled - Close the PIR function.Low - Medium - The device will be able to wake up afterdevice detects human for 5 minutes. Devicestart to take videos and call the mobiledevice at the same time.The device will be able to wake up afterdevice detects human for 3 minutes. Devicestart to take videos and call the mobiledevice at the same time.
FCC Warning This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Any Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: -Reorient or relocate the receiving antenna. -Increase the separation between the equipment and receiver. -Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. -Consult the dealer or an experienced radio/TV technician for help. The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction.

Navigation menu