Micro Star MS6809 Access Point User Manual 8801
Micro Star International Co Ltd Access Point 8801
User Manual
Wireless 802.11b MS-6809(AP11B) User’s Guide Version 1.0 June 2003 G52-C6809X1-G22 FCC Radio Frequency Interference Statement This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. The antenna(s) used for this equipment must be installed to provide a separation distance of at least eight inches (20cm) from all persons. This equipment must not be operated in conjunction with any other antenna. CE Warning This is a Class B product. In a domestic environment, this product may cause radio interference, in which case the user may be required to take adequate measures. Copyright Notice The material in this document is the intellectual property of MICRO-STAR INTERNATIONAL. We take every care in the preparation of this document, but no guarantee is given as to the correctness of its contents. Our products are under continual improvement and we reserve the right to make changes without notice. Trademarks All trademarks used in this manual are the sole property of their respective owners. Windows is a registered trademark of Microsoft Corporation. Revision History Revision V 1.0 Revision History First Release Date June 2003 Important Safety Precautions Always read and follow these basic safety precautions carefully when handling any piece of electronic component. 1. 2. 3. 4. 5. 6. 7. 8. Keep this User’s Manual for future reference. Keep this equipment away from humidity. Lay this equipment on a reliable flat surface before setting it up. The openings on the enclosure are for air convection hence protects the equipment from overheating. All cautions and warnings on the equipment should be noted. Never pour any liquid into the opening that could damage or cause electrical shock. If any of the following situations arises, get the equipment checked by a service personnel: Liquid has penetrated into the equipment The equipment has been exposed to moisture The equipment has not work well or you can not get it work according to User’s Manual The equipment has dropped and damaged If the equipment has obvious sign of breakage DO NOT LEAVE THIS EQUIPMENT IN AN ENVIRONMENT UNCONDITIONED, STORAGE TEMPERATURE ABOVE 700 C OR BELOW -300C, IT MAY DAMAGE THE EQUIPMENT. Table of Contents 1. Introduction ................................................................................................... 1 1.1 What is AP11B .......................................................................................... 1 1.2 How AP11B works ..................................................................................... 2 1.3 Features & Benefits ................................................................................... 3 1.4 Specifications ............................................................................................ 4 1.5 System Requirements ................................................................................ 6 1.5 Package Content ........................................................................................ 6 2. Unit Description ............................................................................................ 7 2.1 Front View ................................................................................................. 7 2.1.1 LEDs Display .......................................................................................... 8 2.2 Rear View ................................................................................................... 9 2.3 Side View ................................................................................................... 10 2.4 Installing Your AP11B ............................................................................... 11 2.4.1 Free-standing Installation ................................................................... 12 2.4.2 Wall-mounted Installation ................................................................... 14 3. Network Configuration ................................................................................. 16 3.1 Default Parameters ..................................................................................... 16 3.2 Web-based Configuration ......................................................................... 17 3.2.1 Typical Configuration .......................................................................... 19 3.2.2 Customized Configuration ................................................................... 22 System ...................................................................................................... 23 LAN .......................................................................................................... 27 Wireless .................................................................................................... 28 4. Technical Support ......................................................................................... 32 5. Troubleshooting ............................................................................................ 33 6. Glossary ........................................................................................................ 34 Index .................................................................................................................. 37 Wireless 802.11b AP11B User’s Guide 1. Introduction 1.1 What is AP11B MSI AP11B wireless access point is IEEE802.11b compliant, and connects one or more wireless enabled computers to an Ethernet network or Cable/xDSL modem for high speed connection, anywhere in your home or office. The AP11B wireless access point’s high-powered antennae offer a range of operation of up to 500 feet indoor, providing seamless roaming throughout your LAN infrastructure. Advanced user authentication ensures a high level of security for wireless networking, while easy-to-use Windows-based diagnostics and statistic tools ensure that you’ll always be in control. Best of all, the AP11B wireless access point features easy installation---your choice to be free-standing, wall- or ceiling-mounted. With all these features come together in one compact, lightweight, and power-efficient unit, you have the ultimate in flexible networking---the AP11B wireless access point. Wireless 802.11b AP11B User’s Guide 1.2 How AP11B Works Infrastructure Networking Mode--- Infrastructure networking differs from Ad-hoc networking is that it includes an Access Point. In an Infrastructure networking, the Access Point can manage the bandwidth to maximize bandwidth utilization. Additionally, the Access Point enables users on a wireless LAN to access an existing wired network, allowing wireless users to take advantage of the wired networks resources, such as Internet, email, file transfer, and printer sharing. The scale and range of the Infrastructure networking are larger and wider than that of the Ad-hoc networking. Internet Cable Modem / DSL Router RG11B (optional) Access Point AP11B ○ ○ ○ NAL TIO RNA I NTE STAR ICROM ○ ○ ○ wireless ○ ○ ○ ○ ○ NAL TIO ER NA I NT STA MICRO- ○ Desktop PC with CB11B (The PCI to CardBus module is optional) ○ wireless ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ wireless ○ ○ wireless ○ ○ NAL TIO RNA I NTE STAR ICROM NAL TIO RNA I NTE STAR ICROM ○ ○ Laptop PC with CB11B Laptop PC with CB11B Laptop PC with CB11B Wireless 802.11b AP11B User’s Guide 1.3 Features & Benefits h 11Mbps Data Rate/150-500ft Indoor Range The AP11B runs with data-intensive applications like multimedia and streaming video/audio --- even through walls, floors and ceilings. You get high speed networking without wires --- ideal for home office networking requirements. h Superior Antennae Design One external dipole and one internal patch antennae provide superior polarized reception and transmission for the best signal quality. h Wi-Fi Certified The AP11B complies with IEEE802.11b standard and Wi-Fi, allowing full interoperability with any Wi-Fi certified wireless product. h Easy Installation User-friendly web-based interface and step-by-step setup wizard make the AP11B fast and easy to install. h WEP Security to Ensure Privacy Supports 64/128-bit WEP encryption, which ensures that your network signal is secure and private. Wireless 802.11b AP11B User’s Guide 1.4 Specifications Data Rates Standard Range Frequency Wireless Radio Type Modulation Type WEP Data Encryption Options Antenna Protocols Support Wired Interface User Selectable Settings LED Indicators Output Power Sensitivity Power Consumption Power Adapter Optional Operation Mode Dimensions 11, 5.5, 2, 1 Mbps, auto-fallback IEEE802.11b 150-500 feet (indoor), 1000-1600 feet (outdoor) 2.4 GHz DSSS (Direct Sequence Spread Spectrum) CCK, BPSK, and QPSK 64/128-bit One External and one internal patch TCP/IP, DHCP Client, HTTP for AP configurability using HTML setup pages One Ethernet IEEE 802.3u 10/100 Base-T, RJ-45 with Auto MDI/MDI-X Network Mode, ESSID, Channel, Tx Rate, RTS/ CTS Threshold, Fragmentation Threshold, WEP, AES, Mac Filtering, Firmware Upgrade Power, Wireless Traffic Status, WEP, Ethernet Link Up to +18dBm 82dBm@11Mbps 85dBm@5.5Mbps 87dBM@2Mbps 88dBM@1Mbps Transmit Mode 310mA 110~120AC 220~240AC DC output: 12V DC Output current: 500mA Ethernet Bridging mode (for client use) 124.5 x 88.5 x 24.5 mm Wireless 802.11b AP11B User’s Guide Weight Operating Environment Input Voltage Package Contents Main unit Documentations & Driver Peripherals & Accessories Certifications United States Europe TBD Operating environment: 0~50OC (32~122OF) Storage environment: -30~70OC (-22~158OF) Humidity: Up to 40OC (104OF) with 85% noncondensing 5VDC (includes AC adapter) One AP11B Wireless Access Point Friendly User’s Guide on CD-ROM; Quick Installation Guide Power Adapter & Power Cord FCC Part 15 Class B CE Wireless 802.11b AP11B User’s Guide 1.5 System requirements After installing the AP11B, you need the followings to configure respective network settings: Computers with the following operating systems and with an installed Ethernet adapter --- Windows® ME/2000/XP --- Linux --- MAC Any browser compatible with Internet Explorer 6.0 and later, or Netscape Navigator 6.0 and later 1.6 Package content Unpack the package and check all the items carefully. If any item contained is damaged or missing, please contact your local dealer as soon as possible. Also, keep the box and packing materials in case you need to ship the unit in the future. Your AP11B package should contain the following items: --- AP11B --- Supporting Stand --- Quick Installation Guide --- CD title including user’s manual and drivers --- AC 12V/500mA Wall Power Adaptor Wireless 802.11b AP11B User’s Guide 2. Unit Description 2.1 Front View <2> <1> <1> LEDs LEDs show the power and traffic utilization status. <2> Antenna External dipole antenna. Wireless 802.11b AP11B User’s Guide 2.1.1 LEDs Display <3> <2> <1> <4> <1> Power Indicator Blue light on: power is attached. Blue light off: power is not attached. *Under this condition, the AP11B will not work properly. <2> Ethernet Link Indicator Green light on: link is ready Green light off: no link partner* Green light blinking: traffic through this Ethernet port <3> Encryption Indicator Green light on: encryption function enabled Green light off: encryption function disabled <4> Wireless Status Indicators There are three indicators showing the status of wireless network. Green light on: traffic utilization is good Yellow light on: traffic utilization is fair Orange light on: traffic utilization is low Wireless 802.11b AP11B User’s Guide 2.2 Rear View <1> <1> Mounting Holes The ideal mounting distance between the mounting holes is 5.5cm. (For information on how to use the mounting holes, refer to Free-standing & Wall-mounted Installation) Wireless 802.11b AP11B User’s Guide 2.3 Side View <1> <2> <3> Figure 3: Side Panel <1> Power Jack Power jack with input voltage at 12VDC/500mA. <2> Reset Button Press and hold the button for more than five seconds to reload the factory default settings. <3> RJ-45 Ethernet Jack RJ-45 connector allows your AP11B connected to a network environment. 10 Wireless 802.11b AP11B User’s Guide 2.4 Installing Your AP11B Positioning The AP11B can be free-standing, wall- or ceiling-mounted. (Refer to 2.4.1 Free-standing Installation, 2.4.2 Wallmounted Installation for details.) Before connecting the AP11B to your devices, please note that the AP11B should be placed in a location with the followings: - Easy accessibility: you can conveniently connect the AP11B to the xDSL/Cable Modem through the Ethernet port. - Easy LEDs observation: you may monitor the real-time networking status and take instant measures as problems arise. - Maximum wireless coverage: to achieve the maximal coverage, the AP11B should be placed at a high level in position without obstacles and defiladed space. No matter how you install the AP11B--- in a wall-mounted or free-standing fashion, remember the antenna should always point vertically upward. Connecting Cables 1. Plug the DC end of the power adapter into the connector of the AP11B, and the AC end to the wall outlet later. 2. For wired connection, connect the AP11B to the LAN port. Power Up When the DC end of the power adapter is connected the AP11B, plug the AC end of the power adapter to the wall outlet can power up the system; and, the system will perform POST (Power-On-Self-Test) to diagnose the system. 11 Wireless 802.11b AP11B User’s Guide 2.4.1 Free-standing Installation Step 1 Take out the AP11B and its supporting stand. Step 2 Locate the mounting holes on the rear panel of the AP11B and align them to the hooks of the stand. Step 3 The AP11B is hooked to the supporting stand. 12 Wireless 802.11b AP11B User’s Guide Step 4 Hold and slide the AP11B to either right or left to secure the access point in place. Step 5 The free-standing installation is completed. 13 Wireless 802.11b AP11B User’s Guide 2.4.2 Wall- or Ceiling-mounted Installation Step 1 Take out the AP11B and screws. Step 2 Hammer the screws into the ceiling or the wall. Step 3 The ideal distance between screws is 5.5cm. 14 Wireless 802.11b AP11B User’s Guide Step 4 Hold and slide the AP11B to either right or left to secure the access point in place. (Refer to Step 4 in Freestanding installation.) Step 5 The wall- or ceiling-mounted installation is completed. To have the maximum wireless coverage, point the antenna vertically downward for ceiling-mounted installation. For wall-mounted installation, point the antenna vertically upward. 15 Wireless 802.11b AP11B User’s Guide 3. Network Configuration Before You Begin... To establish your wireless network connection, you will need: - AP11B(s) - One or more network adapters 3.1 Default Parameters Default Parameters Password IP subnet SSID Channel Encryption DHCP client 16 admin 192.168.1.254 255.255.255.0 AP11B Off Disable Wireless 802.11b AP11B User’s Guide 3.2 Web-based Configuration The AP11B provides you a convenient tool to customize the network settings. Whenever you want to configure the respective settings, open your web browser (eg. Internet Explorer or Netscape Navigator), then type the default IP address 192.168.1.254 in the Address bar and press [Enter]. http://192.168.1.254 Enter Password “admin” 17 Wireless 802.11b AP11B User’s Guide The index window will appear as below, providing three options to select: Logout, Typical Configuration and Customized Configuration. Typical Configuration (Section 3.2.1) provides a stepby-step setup wizard to guide you through the basic settings. Generally, after completing the four steps in this option, your wireless gateway can connect to the ISP and your client computer can access to the Internet without any problem. Customized Configuration (Section 3.2.2) allows you to customize the network settings of your wireless gateway for some specific purposes, such as changing password, updating firmware, and other network settings. Logout allows you to exit the configuration utility. 18 Wireless 802.11b AP11B User’s Guide 3.2.1 Typical Configuration Click Typical Configuration, and the 1-2-3 Setup Wizard will appear to guide you through the 3 steps. The Menu Bar Enter SSID “AP11B” press here The Menu Bar During the setup wizard, whenever you click HOME in the menu bar will make you return to the Home window; click Logout to exit the Configuration Utility. The Menu Bar Step 1. Setting the SSID Service Set Identifier (SSID) is the name designated for a specific wireless local area network (WLAN). The SSID’s factory default settings is AP11B. After entering your SSID, click Next to continue. 19 Wireless 802.11b AP11B User’s Guide Step 2. Setting the Channel 7 is the default channel. All devices on the network must share the same channel. Make your choice and click Next to continue. Step 3 WEP Settings 20 Wireless 802.11b AP11B User’s Guide Authentication Type Open System - communicates the key across the network Shared Key - devices must have identical WEP settings to communicate Both - communicate using either open system or shared key Select your authentication type and move on to the next item. Hexadecimal digits consist of the numbers 0-9 and the letters AF. Encryption Type Select the level of encryption desired: 40-bit or 128-bit. If you want to enable the encryption, for 40-bit key, enter 10 hexadecimal digits; for 128-bit key, enter 26 hexadecimal digits. WEP Key Enter your 10- or 26-digit WEP Key. Enter WEP Key here press here When completed, click Next to close the 1-2-3 Setup Wizard. 21 Wireless 802.11b AP11B User’s Guide 3.2.2 Customized Configuration If you want to customize your AP11B for some specific purposes, you may perform the Customized Configuration here. Click Customized Configuration, and the main window appears as below. The Menu Bar Main Window of Customized Configuration The Menu Bar There is a menu bar in the top of the Customized Configuration window, where contains two options to exit the configuration window (HOME and Logout, as described in p. 11); and three options for advanced configuration: System, LAN, Wireless, allowing you to configure these respective settings and view the system status. The Menu Bar 22 Wireless 802.11b AP11B User’s Guide System This page includes all the basic configuration tools such as options to set up password, upgrade system firmware, view system status and restart system. Password Setting The default password of your access point is “admin”. This option allows you to use personal password to replace the old one. Once you have changed the settings in each option, press Apply to save the changes, or Cancle to abandon. Press Help can bring up the help window. 23 Wireless 802.11b AP11B User’s Guide Firmware Upgrade Once you obtained a new version of firmware (eg. download from the MSI website), you can update the firmware of your AP11B. How to upgrade the firmware: 1. Obtain the latest version of the firmware and save it to the designated location of your system. 2. Browse to the designated location and open the file. 24 Wireless 802.11b AP11B User’s Guide 3. Make sure the file is correct. Press Upgrade Firmware to continue. make sure the file is correct press here 4. Click OK to continue with upgrading. 5. To check if the upgrading process is successfully completed, click System Status to view the the firmware version. Select this 25 Wireless 802.11b AP11B User’s Guide Restart You may restart your wireless gateway manually without unplugging the power cable. Please NOTE that selecting “Restart” will not lose your current configuration. System Status This option contains detail information of your AP11B, including general information and respecitve network settings. 26 Wireless 802.11b AP11B User’s Guide LAN LAN is short for Local Area Network. This is considered your internal network. In the LAN setting page, you can configure the IP setting. DHCP Client---default Disable If you enable a DHCP capable router/gateway, you will not need to assign a static IP address. IP Address---default 192.168.1.254 The IP address of the LAN interface. Subnet Mask---default 255.255.255.0 The subnet mask of the LAN interface. Default Gateway---optional The IP address of the router/gateway on your network. 27 Wireless 802.11b AP11B User’s Guide Wireless In the section, you can configure all wireless related settings for your AP11B. SSID & Channel This option is used to set the SSID (Network Name) and channel for your AP11B. 3-1 How to change the SSID and Channel: 1. Enter you new SSID and Channel selection. 2. Press Apply to reset your SSID and Channel. 3. To check if the system has reset the SSID and Channel, first click System and then select System Status to view the Wireless Settings. 3-2 28 Wireless 802.11b AP11B User’s Guide Radio Setting This option allows you to configure the operation parameters of the AP11B radio settings*. * These settings are for advanced users or MIS staff only. If you do not know how to set these parameters, it is recommended to use the default value. 29 Wireless 802.11b AP11B User’s Guide Encryption This option allows you to configure the settings of data encryption. WEP key must be set before the data encryption is enforced. 30 Wireless 802.11b AP11B User’s Guide Associated Client List This option is to display information of stations that are currently associating to your access point. Association Control This option allows you to control the association privilege of client stations. The one which is added to the Association control List can be set to Allowed or Blocked to the access point upon your permission configuration. 31 Wireless 802.11b AP11B User’s Guide 4. Technical Support Micro-Star International provides free technical support. If a problem arises with your system and no solution can be obtained from this user’s manual, please contact your place of purchase or local distributor. Alternatively, please try the following help resources for further guidance. Visit the MSI website for FAQ, technical guide, driver and software updates, and other information: http://www.msi. com.tw/ Contact our technical staff at: support@msi.com.tw 32 Wireless 802.11b AP11B User’s Guide 5. Troubleshooting Connection LEDs do not grow. Connection Failed. Cannot access the web-based configuration. Cannot get an illegal IP address. Link quality is always poor. Cannot see other clients Some clients cannot connect to AP11B Configuration Password is not working. Setup page is not displayed properly. Settings lost. Cannot access the Internet WEP key lost 33 Wireless 802.11b AP11B User’s Guide 6. Glossary Client Privileges Your home network Gateway can block certain services to computers on your network, using the Client Privileges page in Setup. For example, you can block Internet access to your child’s computer during times when you are not able to supervise his/her computer use. DHCP Dynamic Host Configuration Protocol. This protocol automatically configures the TCP/IP settings of every computer on your home network. DNS Server Address DNS stands for Domain Name System, which allows Internet host computers to have a domain name and one or more IP addresses (such as 192.168.0.10). A DNS server keeps a database of host computers and their respective domain names and IP addresses, so that when a domain name is requested, the user is sent to the proper IP address. The DNS server address used by the computers on your home network is the location of the DNS server your ISP has assigned. DSL Modem DSL stands for Digital Subscriber Line. The DSL modem uses your existing phone lines to transmit data at high speeds. Ethernet A standard for computer networks. Ethernet networks are connected by special cables and hubs, and move data around at up to 10 million bits per second (Mbps). 34 Wireless 802.11b AP11B User’s Guide IP Address IP stands for Internet Protocol. An IP address consists of a series of four numbers separated by periods, that identifies an single, unique Internet computer host. Example: 192.34. 45.8. ISP Gateway Address The ISP Gateway Address is an IP address for the Internet router located at the ISP’s office. This address is required only when using a cable or DSL modem. See ISP for definition. ISP Internet Service Provider. An ISP is a business that provides connectivity to the Internet for individuals and other businesses or organizations. NAT Network Address Translation. This process allows all of the computers on your home network to use one IP address. Using the NAT capability of the HomeConnect home network gateway, you can access the Internet from any computer on your home network without having to purchase more IP addresses from your ISP. PPPoE Point-to-Point Protocol over Ethernet. Point-to-Point Protocol is a method of secure data transmission originally created for dial-up connections; PPPoE is for Ethernet connections. SPI Stateful Packet Inspection. SPI is the type of corporategrade Internet security provided by your Home-Connect home network gateway. Using SPI, the gateway acts as a “firewall,” protecting your network from computer hackers. 35 Wireless 802.11b AP11B User’s Guide Subnet Mask A subnet mask, which may be a part of the TCP/IP information provided by your ISP, is a set of four numbers configured like an IP address. It is used to create IP address numbers used only within a particular network (as opposed to valid IP address numbers recognized by the Internet, which must assigned by InterNIC). TCP/IP Transmission Control Protocol/Internet Protocol. This is the standard protocol for data transmission over the Internet. WEP WEP stands for Wired Equivalent Privacy. It is based on the IEEE 802.11 standard and uses the RC4 encryption algorithm. Enabling WEP allows you to increase security by encrypting data being transferred over your wireless network 36 Wireless 802.11b AP11B User’s Guide Index Accessibility 11 Ad-hoc 2 Antenna 3, 4, 7 AP11B 1 Authentication type 21 Channel 20 Customized configuration 18, 22 LAN 27 IP setting 27 System Firmware upgrade 24 Password setting 23 Restart 26 System status 26 Wireless 28 Associated client list 31 Association control 31 Encryption 30 Radio setting 29 SSID & Channel 28 Data rates 4 Default gateway 27 37 Wireless 802.11b AP11B User’s Guide Default parameter 16 DHCP client 27 Encryption type 21 Ethernet Link 8 External dipole antenna 7 Free-standing 11, 12 Frequency 4 Hexadecimal digits 21 IEEE802.11b 1 Infrastructure networking mode 2 Interface 4 IP address 17, 27 LAN 27 LEDs 7, 8 Modulation type 4 Open system 21 Protocols 4 38 Wireless 802.11b AP11B User’s Guide Range 4 RJ-45 Ethernet Jack 10 Sensitivity 4 Shared key 21 SSID (Service Set Identifier) 19 Standard 4 Subnet mask 27 Traffic utilization 8 Typical configuration 18, 19 1-2-3 Setup Wizard 19 Wall-mounted 11, 14 Web-based configuration 17 WEP key 21 WEP settings 20 Wi-Fi 3 Wireless coverage 11 Wireless radio type 4 Wireless status 8 WLAN (Wireless Local Area Network) 19 39
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.4 Linearized : No Encryption : Standard V1.2 (40-bit) User Access : Print, Fill forms, Extract, Assemble, Print high-res Create Date : 2003:06:16 05:38:28Z Modify Date : 2003:06:30 16:47:20+08:00 Subject : 8801 Page Count : 43 Creation Date : 2003:06:16 05:38:28Z Mod Date : 2003:06:30 16:47:20+08:00 Producer : Acrobat Distiller 5.0 (Windows) Author : Charlie Tong Keywords : Metadata Date : 2003:06:30 16:47:20+08:00 Creator : Charlie Tong Title : 8801 Description : 8801EXIF Metadata provided by EXIF.tools