Micro Star MS6855B Wireless 11g + Bluetooth Combo MiniPCI Card User Manual D Work 2005 1st Communication

Micro Star International Co Ltd Wireless 11g + Bluetooth Combo MiniPCI Card D Work 2005 1st Communication

users manual

iMP54GBT2 (MS-6855B)Wireless 11g + Bluetooth Combo MiniPCI CardOEM Guide
iiFCC Caution 1. The device complies with Part 15 of the FCC rules. Operation is subject tothe following two conditions:(1) This device may not cause harmful interference, and(2) This device must accept any interference received, including interference that may cause undesired operation. 2. FCC RF Radiation Exposure Statement: The equipment complies with FCCRF radiation exposure limits set forth for an uncontrolled environment. 3. This Transmitter must not be co-located or operating in conjunction withany other antenna or transmitter. 4. Changes or modifications to this unit not expressly approved by theparty responsible for compliance could void the user authority to operatethe equipment.FCC StatementThis device is intended only for OEM integrators under the following 1) The antenna must be installed such that 20 cm is maintained between antennaand users, and 2) The transmitter module may not be co-located with any other transmitter orantenna.As long as 2 conditions above are met, further transmitter test will not required. However,the OEM integrator is still responsible for testing end-product for any additional compli-ance requirements required with module installed (for example, digital device emissions,PC peripheral requirements, etc.).Important NoteIn the event that these conditions can not be example certain laptop configurations or co-location with another transmitter), then the FCC authorization is no longer consideredvalid the FCC ID can not be used on the final product. In these circumstances, OEMintegrator will be responsible for re-evaluating the end product (including the transmitter)and obtaining a separate FCC authorization.
iiiEnd Product LabelingThis transmitter module is authorized only for use in device where antenna may beinstalled such that 20 cm may be maintained between antenna and users (for exampleaccess points, routers, wireless ADSL and similar equipment). The final end productmust be labeled in a area with the following: “ Contains TX FCC ID: I4L-MS6855B”.Manual Information for End UsersThe end user must not have manual instructions to remove or install device. The usermanual for end users must include the following information in a prominent location:“IMPORTANT NOTE: To comply with FCC RF exposure compliance requirements,the antenna used for this transmitter must be installed to provide a separation distance ofat least 20 cm from all persons and must not be co-located operating in conjunction withany other antenna or transmitter.” as a result of e-mail transmission.”Important Safety PrecautionsAlways read and follow these basic safety precautions carefully when handling anypiece of electronic component.1. Keep this OEM Guide for future reference.2. Keep this equipment away from humidity.3. Lay this equipment on a reliable flat surface before setting it up.4. The openings on the enclosure are for air convection hence protects theequipment from overheating.5. All cautions and warnings on the equipment should be noted.6. Never pour any liquid into the opening that could damage or cause electricalshock.7. If any of the following situations arises, get the equipment checked by aservice personnel:Liquid has penetrated into the equipmentThe equipment has been exposed to moistureThe equipment has not work well or you can not get it work according to OEM ManualThe equipment has dropped and damagedIf the equipment has obvious sign of breakage8. DO NOT LEAVE THIS EQUIPMENT IN AN ENVIRONMENTUNCONDITIONED, STORAGE TEMPERATURE ABOVE 60O C ORBELOW -20OC, IT MAY DAMAGE THE EQUIPMENT.
“FCC RF exposure requirements: SAR compliance has been established in the laptop computer(s) configurations as documented in this OEM Installation Manual, and can be used in laptop computer(s) with substantially similar physical dimensions, construction, and electrical and RF characteristics. Use in other devices such a PDAs or lappads is not authorized. This transmitter is restricted for use with the specific antenna(s) tested in the application for Certification. The antenna(s) used for this transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.”
1IntroductionMSI MP54GBT2, the Wireless 11g + Bluetooth Combo miniPCICard, is a Type IIIB card, which can be used to integrate withsuch systems as notebook, mini-barebone, PDA, portable PC.With MSI MP54GBT2 embedded inside, a system could pro-vide users with the ability and flexibility to connect up to Internetwirelessly via 802.11g with speed up to 54Mbps, and to linkwith peripherals wirelessly through BluetoothTM v2.0 and ad-vanced EDR (Enhanced Data Rate) technology. BluetoothTMv2.0 technology increases the data rate of BluetoothTM v1.1/1.2from 1.0Mbps to 2.1Mbps.MSI MP54GBT2 is taking advantage of leading technologiesfrom Ralink and CSR. It addresses the co-existence issues inPAN (Personal Area Network) and WLAN (Wireless Local AreaNetwork) markets by providing true simultaneous connectivitywhile deploying IEEE 802.11g and Bluetooth v2.0 Along withthis combo solution, a system installed with a single card is ableto offer dual mode capability of WiFi and BluetoothTM. It willbenefit system vendors in miniaturization of system dimensionand BOM cost reduction, as well as also make users happy withthe all-in-one functionality.>>> 1.1 MP54GBT2 (MS-6855B) - Wireless 11g + Bluetooth Combo MiniPCI Card
2Ad-hoc Mode : An Ad-hoc network is a local area network orother small network, especially one with wireless or temporaryplug-in connections, in which some of the network devices arepart of the network only for the duration of a communicationssession. Users in the network can share files, print to a sharedprinter, and access the Internet with a shared modem. In thiskind of network, new devices can be quickly added; however,users can only communicate with other wireless LAN comput-ers that are in this wireless LAN workgroup, and are withinrange.>>> 1.2 How MP54GBT2 WorksMP54GBT2 MP54GBT2In WLAN Environment1.2.1WLAN+Bluetooth Combo MiniPCI Card WLAN+Bluetooth Combo MiniPCI Card
3Infrastructure Mode : The difference between Infrastructurenetwork and Ad-hoc network is that the former one includes anAccess Point. In an Infrastructure network, the Access Point canmanage the bandwidth to maximize bandwidth utilization. Addi-tionally, the Access Point enables users on a wireless LAN toaccess an existing wired network, allowing wireless users to takeadvantage of the wired networks resources, such as Internet,email, file transfer, and printer sharing. The scale and range of theInfrastructure networking are larger and wider than that of theAd-hoc networking.MP54GBT2 MP54GBT2WLAN+Bluetooth Combo MiniPCI CardWLAN+Bluetooth Combo MiniPCI Card
4In Bluetooth ConnectionThe term “Bluetooth” refers to a worldwide standard for thewireless exchange of data between two devices. In order to ex-change data, two Bluetooth devices must establish a connection.Before a connection is established, one device must request aconnection with another. The second device accepts (or rejects)the connection. The originator of the request is known as theclient. The device that accepts (or rejects) the request is knownas the server. Many Bluetooth devices can act as both client andserver. Every Bluetooth device that provides a service must beprepared to respond to a connection request. Bluetooth soft-ware is always running in the background on the server, ready torespond to connection requests.1.2.2Bluetooth-enabled DevicesWLAN+Bluetooth Combo MiniPCI CardMP54GBT2
5>>> 1.3 SpecificationsForm Factor 32-bit Type IIIBOperation voltage 3.3VAntenna Connector Two antenna connectorsOperating System Microsoft® Windows® 98SE/ME/2000/XPEnvironmental - Operating Temperature: 0 ~ 55OC- Operating Humidity: 10 ~ 90%, non-condensingDimensions (WxDxH)59.75 x 44.6 x 3.5mmNetwork Standard IEEE 802.11; IEEE 802.11b/gFrequency Band 2.412-2.484 GHzData Rate IEEE 802.11g (auto-fallback):- OFDM: 54, 48, 36, 24, 18, 12, 9 and 6MbpsIEEE 802.11b (auto-fallback):- CCK: 11, 5.5 Mbps- DQPSK: 2 Mbps- DBPSK: 1 MbpsMedia Access ControlCSMA/CA with ACKTransmission DSSS (direct sequential spreadspectrum)Network ArchitectureAd-Hoc Mode (Peer-to-Peer);Infrastructure ModeAntenna Type Two antenna connectors supportPower Consumption TX peak: 380mA RX peak: 250mAIdle:5mA (TBD)Radio: disabled: TBD Hardware Specification WLAN Specification
6Channel IEEE 802.11g:Ch. 1-11 – N. AmericaCh. 1-13 – JapanCh. 1-13– Europe ETSICh. 10-11 – SpainCh. 10-13 – FranceIEEE 802.11b:Ch. 1-11 – N. AmericaCh. 1-13 – JapanCh. 1-13– Europe ETSICh. 10-11 – SpainCh. 10-13 – FranceOutput Power Output Power(Before Antenna)11b: 18dBm+/-2 Max 11g: 14dBm+/-2 MaxReceiver Sensitivity 54 Mbps OFDM @ 10% PER = -65 dBm(Average Value) 48 Mbps OFDM @ 10% PER = -66 dBm36 Mbps OFDM @ 10% PER = -70 dBm24 Mbps OFDM @ 10% PER = -74 dBm18 Mbps OFDM @ 10% PER = -77 dBm12 Mbps OFDM @ 10% PER = -79 dBm11 Mbps CCK @ 8% PER = -80 dBm9 Mbps OFDM @ 10% PER = -81 dBm6 Mbps OFDM @ 10% PER = -82 dBm5.5 Mbps CCK @ 8% PER = -82 dBm2 Mbps QPSK @ 8% PER = -83 dBm1 Mbps BPSK @ 8% PER = -83 dBm
7Network Standard Bluetooth v2.0 (Class II)Frequency Band 2.4-2.483 GHzData Rate Up to 2.1MbpsChannel 79 sub-channelsTransmission FHSS (Frequency Hopping SpreadSpectrum)Modulation GFSKAntenna Type One antenna connector supportPower Consumption 100mA (maximum, continuous TX)Max. Output Power Up to 2dBmMax. Input Level 0dBmReceiver Sensitivity -79dBm @ BER<0.1%Range Up to 30 mPhysical Links Support ACL linkNetwork Capabilities Support piconet point-to-point andpoint-to multipoint connectionsLink Manager 3-slot Packets: Yes5-slot Packets: YesSlot Offset: YesTiming Accuracy: YesSwitch: YesHold Mode: YesSniff Mode: YesTest Mode: YesPark Mode: YesRSSI: YesPower Control: YesAuthentication: YesEncryption: Yes Bluetooth Specification
8>>> 1.4 System RequirementsBefore installing MP54GBT2, your PC should meet the follow-ing items:- One desktop/notebook PC with an available MiniPCI slot.- Windows® 98SE/ME/2000/XP operating system.- Minimum 5MB free disk space for installing the driver and utilities.- One CD-ROM drive, double speed or higher.>>> 1.5 Package ContentsUnpack the package and check all the items carefully. If any itemcontained is damaged or missing, please contact your local dealeras soon as possible. Also, keep the box and packing materials incase you need to ship the unit in the future. The package shouldcontain the following items:- One Wireless 11g + Bluetooth Combo MiniPCI Card.- One Installation CD-ROM including drivers, utilities, and the manual files.
9>>> 1.6 Product ViewGolden FingerWLAN 11g antenna connectorsConnect to external antennas forenhanced data transmission andreception. The external antennas arewell designed on the desktop or note-book computers.Bluetooth antennaConnector
10Hardware Installation 1. Locate the MiniPCI slot on the mainboard.Place yourMP54GBT2 over the MiniPCI slot (at an angle of 30degrees). Then, gently insert it into the slot until thegolden finger of the card gets fully inserted. 2. Press down the card, and the retaining clips (on twosides of the slot) will lock onto the notches of the card. 3. Connect the attenna’s cable to the connector on the card.Foolproof notchThe following diagrams provide you a basic installation for yourMP54GBT2. The instruction below is suitable for most com-puters with MiniPCI slot. For more information about theMiniPCI module, please refer to your computer’s manual.Installing MP54GBT2:
11Software InstallationThis chapter describes the procedures of installing the driverand utility. Follow the instruction step by step to finish theinstallation. If you use Windows® 98SE/ME, please preparethe Windows® Setup CD at hand before installing the driver;because the system will ask you to insert the Setup CD to copyfiles during the installation.Please NOTE that the MP54GBT2 should be installed intoyour computer before installing the driver and utility. Then,the operating system will detect a new device and start to con-figure the new device. Click Cancel here to start installationfrom the InstallShield Wizard.ClickTip: The MP54GBT2 adaptershould be installed into your PCbefore installing the driver andutility.The adapter model you installed
12Insert the software CD into your CD-ROM drive, and the Setupprogram should launch automatically.If the Autorun program doesn’t launch automatically, click Startat the taskbar and select Run.... Type E:\setup.exe (where E isyour CD-drive) in the Open box and click OK to launch theSetup program manually.The main screen of Setup program will appear as below. 1. Click the Install WLAN Driver button. 2. The welcome screen of InstallShield Wizard appears.Click Next. 3. Read and accept the License Agreement; then, click Next. 4. Click Install and the program will copy the necessaryfiles to the system. The progress indicator shows theinstalling status. 5. Click Finish when the WLAN driver installation iscompleted.STEP1STEP2
13 1. Click the Install Bluetooth Driver button. 2. The welcome screen of InstallShield Wizard appears.Click Next. 3. Read and accept the License Agreement; then, click Next. 4. Click Next to install the driver in the default destinationfolder. 5. Click Install and the program will copy the necessaryfiles to the system. The progress indicator shows theinstalling status. 6. Click Finish when the bluetooth driver installation iscompleted.Wireless LAN iconSTEP3STEP4Click the Exit button.The Wireless LAN icon and Bluetooth icon will appear in thestatus bar.Bluetooth icon
Example of Antennas Installation The distance between WLAN antennas and the user body (excluding hands, wrists, feet, and ankles) must be more than 20 cm. In the laptop, for example, the antennas can be located on the top of the screen. See the follows as an illustration: MS-6855BWLANMain AntennaWLANAux AntennaBluetoothAntennaMS-6855BWLANMain AntennaWLANAux AntennaBluetoothAntenna>20cmWLAN Antennas>20cm>20cmWLAN Antennas>20cm

Navigation menu