Microelectronics Technology RU-813 UHF RFID Reader User Manual CCCCCCCCCCCC

Download:
Mirror Download [FCC.gov]
Document ID	658034
Application ID	Y/FNvgjg5H4V9R1rCE8bZA==
Document Description	Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	56.79kB (709872 bits)
Date Submitted	2006-05-15 00:00:00
Date Available	2006-06-29 00:00:00
Creation Date	2006-04-18 13:14:34
Producing Software	Acrobat Distiller 7.0.5 (Windows)
Document Lastmod	2006-04-26 16:07:22
Document Title	CCCCCCCCCCCC
Document Creator	Acrobat PDFMaker 7.0.7 for Word
Document Author:	QA

台揚企業集團
ISO 9001 Certified
MTI Group.
MTI RFID Reader
Operation Manual
LTR.
AS ISSUED
E.C.O. NO.
DATE
Steven Kao
CHANGE INFORMATION
REVISED
AUTHOR
HISTORY
DWG NO. 43-RFID0900-E1-MANUAL
APPROVED BY
PAGE NO.
Eric Hsiang
OF
23
台揚集團智慧財產
任何未經授權逕予複製、重製、公開或使用本文之行為，將被視為侵害
台揚集團之智慧財產權，將可因此負擔法律責任。
MTI Group Proprietary Information
Any unauthorized use, duplication, reproduction, or disclosure of this document may be
considered as infringement of MTI Group’s intellectual property rights, the infringer may
be accused and liable applicable legal penalties.
LTR.
E.C.O. NO.
DATE
CHANGE INFORMATION
REVISED
AUTHOR
HISTORY
DWG NO. 43-RFID0900-E1-MANUAL
TITLE: MTI RFID Reader Operation Manual
台揚集團智慧財產
任何未經授權逕予複製、重製、公開或使用本文之行為，將被視為侵害
台揚集團之智慧財產權，將可因此負擔法律責任。
MTI Group Proprietary Information
Any unauthorized use, duplication, reproduction, or disclosure of this document may be
considered as infringement of MTI Group’s intellectual property rights, the infringer may
be accused and liable applicable legal penalties.
台揚科技股份有限公司
ISO 9001 Certified
MICROELECTRONICS TECHNOLOGY INC.
MTI RFID Reader Operation Manual
43-RFID0900-E1-MANUAL
PAGE: 3
DATE: 18-04-2006
Contents
Chapter 1 – Introduction......................................................................................... 4
1.1 Purpose...................................................................................................... 4
1.2 Unpacking the Reader ............................................................................... 4
1.3 About the MTI RFID RU-813 Reader ......................................................... 4
1.4 Federal Communication Commission Interference Statement................... 5
Chapter 2 – Installation .......................................................................................... 7
2.1 Antenna Installation ................................................................................... 7
2.2 Reader Mechanical Installation.................................................................. 9
2.2.1 Hollow Concrete Block Wall Mounting ...........................................................10
2.2.2 Solid Concrete Wall Mounting..........................................................................10
2.2.3 Wood or Metal Wall Mounting...........................................................................10
2.2.4 Drywall Mounting ..............................................................................................11
2.3 Ethernet LAN Installation ......................................................................... 11
Chapter 3 – Configuration .................................................................................... 12
3.1 Ethernet Overview ................................................................................... 12
3.2 IP Address or Subnet Mask Setup ........................................................... 12
3.3 Gateway Address Setup .......................................................................... 13
3.4 Destination Address and Destination Port Setup ..................................... 13
3.5 Setup Password Setup ............................................................................ 14
Chapter 4 – Operation.......................................................................................... 15
4.1 Overview .................................................................................................. 15
4.2 Startup ..................................................................................................... 16
4.2 Version Identification................................................................................ 16
4.3. Operating ................................................................................................ 17
4.3.1 Function Tabs ...................................................................................................17
4.3.2 Status Bar..........................................................................................................17
4.3.3 Connect .............................................................................................................18
4.3.4 Read Tag Data...................................................................................................18
4.3.5 Write Data to Tag ..............................................................................................20
Chapter 5 – Specification ..................................................................................... 23
台揚集團智慧財產
任何未經授權逕予複製、重製、公開或使用本文之行為，將被視為侵害
台揚集團之智慧財產權，將可因此負擔法律責任。
MTI Group Proprietary Information
Any unauthorized use, duplication, reproduction, or disclosure of this document may be
considered as infringement of MTI Group’s intellectual property rights, the infringer may
be accused and liable applicable legal penalties.
台揚科技股份有限公司
ISO 9001 Certified
MTI RFID Reader Operation Manual
43-RFID0900-E1-MANUAL
MICROELECTRONICS TECHNOLOGY INC.
PAGE: 4
DATE: 18-04-2006
Chapter 1 – Introduction
1.1 Purpose
This document provides users and technicians with instructions for installing and
operating the MTI RFID RU-813 Reader Application. The MTI RFID Reader
Application and associated documentation are provided as an aid for configuring
your MTI RFID reader and is not intended as an engineering design system.
1.2 Unpacking the Reader
After opening the shipping container perform the following:
1. Unpack the contents of container.
2. Inspect the shipping container for damage. If damaged, notify the carrier and
Microelectronic Technology Inc. Keep the shipping materials for inspection.
3. Verify your reader package includes the following items:
„ MTI RFID UHF RU-813 Reader
„ Antennas
„ SMA Male to SMA Male Antenna Cables
„ 12 Vdc power adapter
„ Power Cord
„ System documentation CD
1.3 About the MTI RFID RU-813 Reader
The RU-813 is the MTI UHF RFID reader. This device currently supports many of
today’s most popular UHF tags including EPC G2. The device can read or write to
any tag depending on the tag capabilities. The RU-813 incorporates a scalable
architecture that enables the reader to be implemented as a stand-alone or
included in a networked reader environment using Ethernert LAN connection.
台揚集團智慧財產
任何未經授權逕予複製、重製、公開或使用本文之行為，將被視為侵害
台揚集團之智慧財產權，將可因此負擔法律責任。
MTI Group Proprietary Information
Any unauthorized use, duplication, reproduction, or disclosure of this document may be
considered as infringement of MTI Group’s intellectual property rights, the infringer may
be accused and liable applicable legal penalties.
台揚科技股份有限公司
ISO 9001 Certified
MICROELECTRONICS TECHNOLOGY INC.
MTI RFID Reader Operation Manual
43-RFID0900-E1-MANUAL
PAGE: 5
DATE: 18-04-2006
1.4 Federal Communication Commission Interference
Statement
This equipment has been tested and found to comply with the limits for a Class B
digital device, pursuant to Part 15 of the FCC Rules. These limits are designed
to provide reasonable protection against harmful interference in a residential
installation. This equipment generates, uses and can radiate radio frequency
energy and, if not installed and used in accordance with the instructions, may
cause harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation. If this
equipment does cause harmful interference to radio or television reception, which
can be determined by turning the equipment off and on, the user is encouraged to
try to correct the interference by one of the following measures:
„ Reorient or relocate the receiving antenna.
„ Increase the separation between the equipment and receiver.
„ Connect the equipment into an outlet on a circuit different from that
to which the receiver is connected.
„ Consult the dealer or an experienced radio/TV technician for help.
This device complies with Part 15 of the FCC Rules. Operation is subject to the
following two conditions: (1) This device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that
may cause undesired operation.
FCC Caution: Any changes or modifications not expressly approved by the party
responsible for compliance could void the user's authority to operate this
equipment.
IMPORTANT NOTE:
FCC Radiation Exposure Statement:
This equipment complies with FCC radiation exposure limits set forth for an
台揚集團智慧財產
任何未經授權逕予複製、重製、公開或使用本文之行為，將被視為侵害
台揚集團之智慧財產權，將可因此負擔法律責任。
MTI Group Proprietary Information
Any unauthorized use, duplication, reproduction, or disclosure of this document may be
considered as infringement of MTI Group’s intellectual property rights, the infringer may
be accused and liable applicable legal penalties.
台揚科技股份有限公司
ISO 9001 Certified
MICROELECTRONICS TECHNOLOGY INC.
MTI RFID Reader Operation Manual
43-RFID0900-E1-MANUAL
PAGE: 6
DATE: 18-04-2006
uncontrolled environment. This equipment should be installed and operated with
minimum distance 20cm between the radiator & your body.
This transmitter must not be co-located or operating in conjunction with any other
antenna or transmitter.
台揚集團智慧財產
任何未經授權逕予複製、重製、公開或使用本文之行為，將被視為侵害
台揚集團之智慧財產權，將可因此負擔法律責任。
MTI Group Proprietary Information
Any unauthorized use, duplication, reproduction, or disclosure of this document may be
considered as infringement of MTI Group’s intellectual property rights, the infringer may
be accused and liable applicable legal penalties.
台揚科技股份有限公司
ISO 9001 Certified
MTI RFID Reader Operation Manual
43-RFID0900-E1-MANUAL
MICROELECTRONICS TECHNOLOGY INC.
PAGE: 7
DATE: 18-04-2006
Chapter 2 – Installation
2.1 Antenna Installation
The RU-813 supports from one Tx/Rx to four Tx/Rx external antennas in a variety
of configurations. One- and two-antenna configurations are typical for most
conveyor and container tracking. Four-antenna configurations are used for portals
and loading dock doorways.
Tx
Rx
Figure 1
6dBi Flat Antenna Outline
台揚集團智慧財產
任何未經授權逕予複製、重製、公開或使用本文之行為，將被視為侵害
台揚集團之智慧財產權，將可因此負擔法律責任。
MTI Group Proprietary Information
Any unauthorized use, duplication, reproduction, or disclosure of this document may be
considered as infringement of MTI Group’s intellectual property rights, the infringer may
be accused and liable applicable legal penalties.
台揚科技股份有限公司
ISO 9001 Certified
MTI RFID Reader Operation Manual
43-RFID0900-E1-MANUAL
MICROELECTRONICS TECHNOLOGY INC.
PAGE: 8
DATE: 18-04-2006
The RU-813 is factory calibrated for operation with the following type of antenna
and cable:
Item
Operating Frequency
Impedance
VSWR
Polarization
Gain
Front to back ratio
Axial ratio
Connector
Dimension
Specification
902-928MHz
50Ohm
<1.3
Circular
6dBi
20dB
3dB
SMA Female
140 x140 x30mm
The RU-813 is factory configured to operate with one Tx/Rx antenna connected
to Port Tx1/Rx1. However, the reader can operate with up to four Tx/Rx
antennas. If additional antennas are to be installed, use RF Command Suite to
select the number of antennas in figure 2.
Antenna RF Ports
One Tx /Rx
Two Tx /RX
Three Tx /Rx
Four Tx/ Rx
Figure 2
Select Port : Tx 1 , Rx 1
Select Port : Tx 1 , Rx 1, Tx 2 , Rx 2
Select Port : Tx 1 , Rx 1, Tx 2 , Rx 2, Tx 3 ,Rx 3
Select Port : Tx 1 , Rx 1, Tx 2 , Rx 2, Tx 3 ,Rx 3 ,Tx 4 , Rx 4
Antenna Port Selection Table
It is highly recommended that the antenna mounting be adjustable in order to
obtain the best performance from the system. However, the antennas must be
installed on a solid surface or frame to prevent damage or later misalignment.
Perform the following to install the antennas.
台揚集團智慧財產
任何未經授權逕予複製、重製、公開或使用本文之行為，將被視為侵害
台揚集團之智慧財產權，將可因此負擔法律責任。
MTI Group Proprietary Information
Any unauthorized use, duplication, reproduction, or disclosure of this document may be
considered as infringement of MTI Group’s intellectual property rights, the infringer may
be accused and liable applicable legal penalties.
台揚科技股份有限公司
ISO 9001 Certified
MICROELECTRONICS TECHNOLOGY INC.
MTI RFID Reader Operation Manual
43-RFID0900-E1-MANUAL
PAGE: 9
DATE: 18-04-2006
2.2 Reader Mechanical Installation
TheRU-813 is designed for easy installation. The following instructions provide
the information to install your UHF reader.
As shown in figure 3, the reader is designed for horizontal installation. Mounting
keyholes are provided on each side of the base plate for easy, non- permanent,
installation and removal in figure 4.
Figure 3
Figure 4
RU-813 Reader Installation
RU-813 Base Plate with Mounting Keyholes
台揚集團智慧財產
任何未經授權逕予複製、重製、公開或使用本文之行為，將被視為侵害
台揚集團之智慧財產權，將可因此負擔法律責任。
MTI Group Proprietary Information
Any unauthorized use, duplication, reproduction, or disclosure of this document may be
considered as infringement of MTI Group’s intellectual property rights, the infringer may
be accused and liable applicable legal penalties.
台揚科技股份有限公司
ISO 9001 Certified
MICROELECTRONICS TECHNOLOGY INC.
MTI RFID Reader Operation Manual
43-RFID0900-E1-MANUAL
PAGE: 10
DATE: 18-04-2006
2.2.1 Hollow Concrete Block Wall Mounting
To temporarily mount theRU-813 to a hollow concrete block wall, MTI
recommends metal sleeve type concrete anchors that accept a #10 screw
and flat washer. To install the reader on a hollow concrete block wall, perform
the following.
1. Refer to Figure 4, and mark the location of the mounting screws. Do not
install the anchors into the mortar joint.
2. Drill the appropriate size hole for a metal sleeve type anchor.
3. Install the anchors.
4. Install the washers and insert the screws.
5. Tighten the screws to within .375” of the anchor.
6. Install the reader and finish tightening the screws.
2.2.2 Solid Concrete Wall Mounting
To temporarily mount theRU-813 to a solid concrete wall, MTI recommends
one-piece expansion type concrete anchors that accept a #10 screw and flat
washer. To install the reader on a concrete wall, perform the following.
1. Refer to Figure 4, and mark the location of the mounting screws.
2. Drill the appropriate size hole for a expansion type anchor and install the
anchors.
3. Install the washers and insert the screws.
4. Tighten the screws to within .375” of the anchor.
5. Install the reader and finish tightening the screws.
2.2.3 Wood or Metal Wall Mounting
To temporarily mount the RU-813 to a wood or sheet metal wall, MTI
recommends either #10 x 1 inch wood screws or #10 x 3/4 inch sheet metal
screws and washers. To install the reader on a wood or metal wall, perform
the following.
台揚集團智慧財產
任何未經授權逕予複製、重製、公開或使用本文之行為，將被視為侵害
台揚集團之智慧財產權，將可因此負擔法律責任。
MTI Group Proprietary Information
Any unauthorized use, duplication, reproduction, or disclosure of this document may be
considered as infringement of MTI Group’s intellectual property rights, the infringer may
be accused and liable applicable legal penalties.
台揚科技股份有限公司
ISO 9001 Certified
MICROELECTRONICS TECHNOLOGY INC.
1.
2.
3.
4.
5.
MTI RFID Reader Operation Manual
43-RFID0900-E1-MANUAL
PAGE: 11
DATE: 18-04-2006
Refer to Figure 4, and mark the location of the mounting screws.
Drill the appropriate size hole for screws.
Install the washers and insert the screws.
Tighten the screws to within .375” of the surface.
Install the reader and finish tightening the screws.
2.2.4 Drywall Mounting
To temporarily mount the RU-813 to drywall or sheetrock, MTI
recommends either #10 toggle bolts or #10 drywall anchors.
2.3 Ethernet LAN Installation
The RU-813 can be networked with other readers on an enterprise 10/100 BaseT
Ethernet LAN with crossover Ethernet cable. The IP address can then be accessed
by your network server or host computer, please refer to chapter 3 for further
information.
Ethernet Port
Power Port
Figure 5
Installation
台揚集團智慧財產
任何未經授權逕予複製、重製、公開或使用本文之行為，將被視為侵害
台揚集團之智慧財產權，將可因此負擔法律責任。
MTI Group Proprietary Information
Any unauthorized use, duplication, reproduction, or disclosure of this document may be
considered as infringement of MTI Group’s intellectual property rights, the infringer may
be accused and liable applicable legal penalties.
台揚科技股份有限公司
ISO 9001 Certified
MICROELECTRONICS TECHNOLOGY INC.
MTI RFID Reader Operation Manual
43-RFID0900-E1-MANUAL
PAGE: 12
DATE: 18-04-2006
Chapter 3 – Configuration
3.1 Ethernet Overview
When the reader is installed on a TCP/IP network connected to the internet, the
reader must be assigned a unique IP address. The default IP address is set as
192.168.1.200, and the default subnet mask is set as 255.255.255.0, when the
reader is shipped from factory. All these can be set by using web browser.
Beside, the gateway, destination IP address, destination port, and setup password
can be set as the same way as above.
Note:
„ The default setting of destination IP address is set as 192.168.1.39
„ The default setting of destination port is set as 100
„ The default setting for the setup password is set as empty.
3.2 IP Address or Subnet Mask Setup
To set up IP address of RU-813 for Ethernet communication, perform the following
steps:
1.
2.
3.
4.
5.
6.
7.
8.
Verify all cables and power supplies are secure and power up the readers.
Set the subnet mask of host computer to the same subnet domain of reader.
Open Web browser (IE or Netscape) on your host computer.
Type IP address at web address on the browser.
Enter password (the default password is empty), then click “Login”.
Change IP address.
Change subnet mask, if necessary.
Click “Update”
台揚集團智慧財產
任何未經授權逕予複製、重製、公開或使用本文之行為，將被視為侵害
台揚集團之智慧財產權，將可因此負擔法律責任。
MTI Group Proprietary Information
Any unauthorized use, duplication, reproduction, or disclosure of this document may be
considered as infringement of MTI Group’s intellectual property rights, the infringer may
be accused and liable applicable legal penalties.
台揚科技股份有限公司
ISO 9001 Certified
MICROELECTRONICS TECHNOLOGY INC.
MTI RFID Reader Operation Manual
43-RFID0900-E1-MANUAL
PAGE: 13
DATE: 18-04-2006
3.3 Gateway Address Setup
To set up IP address of RU-813 for Ethernet communication, perform the following
steps:
1.
2.
3.
4.
5.
6.
7.
Verify all cables and power supplies are secure and power up the readers.
Set the subnet mask of host computer to the same subnet domain of reader.
Open Web browser on your host computer.
Type IP address at web address on the browser.
Enter password, then click “Login”.
Chang Gateway address
Click “Update”
3.4 Destination Address and Destination Port Setup
To set up destination address and destination port of RU-813 for Ethernet
communication, perform the following steps:
1.
2.
3.
4.
5.
6.
7.
Verify all cables and power supplies are secure and power up the readers.
Set the subnet mask of host computer to the same subnet domain of reader.
Open Web browser on your host computer.
Type IP address at web address on the browser.
Enter password, then click “Login”.
Chang destination address and destination port
Click “Update”
台揚集團智慧財產
任何未經授權逕予複製、重製、公開或使用本文之行為，將被視為侵害
台揚集團之智慧財產權，將可因此負擔法律責任。
MTI Group Proprietary Information
Any unauthorized use, duplication, reproduction, or disclosure of this document may be
considered as infringement of MTI Group’s intellectual property rights, the infringer may
be accused and liable applicable legal penalties.
台揚科技股份有限公司
ISO 9001 Certified
MTI RFID Reader Operation Manual
43-RFID0900-E1-MANUAL
MICROELECTRONICS TECHNOLOGY INC.
PAGE: 14
DATE: 18-04-2006
3.5 Setup Password Setup
To set up password of RU-813 for Ethernet communication, perform the following
steps:
1.
2.
3.
4.
Verify all cables and power supplies are secure and power up the readers.
Set the subnet mask of host computer to the same subnet domain of reader.
Open Web browser on your host computer.
Type IP address at web address on the browser.
5. Enter password, then click “Login”.
6. Chang setup password
7. Click “Update”
Note: Once the Setup password is changed, the new password will be
required for next login process.
台揚集團智慧財產
任何未經授權逕予複製、重製、公開或使用本文之行為，將被視為侵害
台揚集團之智慧財產權，將可因此負擔法律責任。
MTI Group Proprietary Information
Any unauthorized use, duplication, reproduction, or disclosure of this document may be
considered as infringement of MTI Group’s intellectual property rights, the infringer may
be accused and liable applicable legal penalties.
台揚科技股份有限公司
ISO 9001 Certified
MICROELECTRONICS TECHNOLOGY INC.
MTI RFID Reader Operation Manual
43-RFID0900-E1-MANUAL
PAGE: 15
DATE: 18-04-2006
Chapter 4 – Operation
4.1 Overview
The RFID Reader Application is a Microsoft Windows application that provides a
Graphical User Interface (GUI) for MTI RFID Reader Products.
Figure 6 Overview of MTI RFID Reader Application
Functions provided by the RFID Reader Application include the following:
„ View tag data
„ Write data to tag
台揚集團智慧財產
任何未經授權逕予複製、重製、公開或使用本文之行為，將被視為侵害
台揚集團之智慧財產權，將可因此負擔法律責任。
MTI Group Proprietary Information
Any unauthorized use, duplication, reproduction, or disclosure of this document may be
considered as infringement of MTI Group’s intellectual property rights, the infringer may
be accused and liable applicable legal penalties.
台揚科技股份有限公司
ISO 9001 Certified
MICROELECTRONICS TECHNOLOGY INC.
MTI RFID Reader Operation Manual
43-RFID0900-E1-MANUAL
PAGE: 16
DATE: 18-04-2006
4.2 Startup
MTI RFID Reader Application can communicate with all MTI readers through the
Ethernet (TCP/IP) port. Verify your reader is connected to the correct port and
power up.
After connect power cord, the PWR LED light on the shell of reader will turn on. As
figure 7.
Figure 7
To start up MTI RFID Reader Application, perform the following:
1. Execute RFID DEMO AP.exe
2. The application will attempt to connect to using the most recent configuration
settings.
Note:
„ The destination port for this application is required to set as 100, please refer
to chapter 3 for Ethernet configuration setting.
4.2 Version Identification
To determine the current version of your MTI RFID Reader Application, refer to
the status bar below the application.
Figure 8 Current version of the application
台揚集團智慧財產
任何未經授權逕予複製、重製、公開或使用本文之行為，將被視為侵害
台揚集團之智慧財產權，將可因此負擔法律責任。
MTI Group Proprietary Information
Any unauthorized use, duplication, reproduction, or disclosure of this document may be
considered as infringement of MTI Group’s intellectual property rights, the infringer may
be accused and liable applicable legal penalties.
台揚科技股份有限公司
ISO 9001 Certified
MTI RFID Reader Operation Manual
43-RFID0900-E1-MANUAL
MICROELECTRONICS TECHNOLOGY INC.
PAGE: 17
DATE: 18-04-2006
4.3. Operating
4.3.1 Function Tabs
RFID Reader Application operations are divided into two functional interfaces
selected by tabs at the top of the display.
Figure 9 functional tabs
„ Read Function: Read tag data.
„ Write Function: Write data to tag
4.3.2 Status Bar
At the application below, the status bar provide the information of the
operation.
message
version
Connection
RF Power
Figure 10 Status bar
Connection light:
„ Red: no connect
„ Green: connected
RF Power light:
„ Red: RF off
„ Yellow: RF On
台揚集團智慧財產
任何未經授權逕予複製、重製、公開或使用本文之行為，將被視為侵害
台揚集團之智慧財產權，將可因此負擔法律責任。
MTI Group Proprietary Information
Any unauthorized use, duplication, reproduction, or disclosure of this document may be
considered as infringement of MTI Group’s intellectual property rights, the infringer may
be accused and liable applicable legal penalties.
台揚科技股份有限公司
ISO 9001 Certified
MICROELECTRONICS TECHNOLOGY INC.
MTI RFID Reader Operation Manual
43-RFID0900-E1-MANUAL
PAGE: 18
DATE: 18-04-2006
4.3.3 Connect
Before read/write tag, you need to establish connection between PC and
reader. Use [Connect] button to connect to reader. If application does not
connect, verify the PC and reader’s Ethernet network setting. Please refer to
Chapter 3 for further information
network
IP address
Subnet mask
IP address
port
PC
192.168.1.39
255.255.255.0
Reader
192.168.1.200
100
4.3.4 Read Tag Data
To display tag data as the data is received from the reader by clicking the RF
On button. When tags are read, they are displayed in the window and the
statistics are updated.
When reader accepted the RF On command from computer, the TX LED light
on the shell of reader will turn on. On the other hand, TX LED light will turn off
when RF OFF. As following figure.
RF ON
RF OFF
Figure 11
台揚集團智慧財產
任何未經授權逕予複製、重製、公開或使用本文之行為，將被視為侵害
台揚集團之智慧財產權，將可因此負擔法律責任。
MTI Group Proprietary Information
Any unauthorized use, duplication, reproduction, or disclosure of this document may be
considered as infringement of MTI Group’s intellectual property rights, the infringer may
be accused and liable applicable legal penalties.
台揚科技股份有限公司
ISO 9001 Certified
MTI RFID Reader Operation Manual
43-RFID0900-E1-MANUAL
MICROELECTRONICS TECHNOLOGY INC.
PAGE: 19
DATE: 18-04-2006
During the RF On period, if reader receive the response signal from tag, the
RX LED light on the shell of reader will flash one time.
Figure 12 RX LED light
The Tag Read Time displayed in the lower window is the total tag read count
since the last reset. The Antenna No is the tag be read by which Tx/Rx
antenna.
Figure 13
台揚集團智慧財產
任何未經授權逕予複製、重製、公開或使用本文之行為，將被視為侵害
台揚集團之智慧財產權，將可因此負擔法律責任。
display tag data
MTI Group Proprietary Information
Any unauthorized use, duplication, reproduction, or disclosure of this document may be
considered as infringement of MTI Group’s intellectual property rights, the infringer may
be accused and liable applicable legal penalties.
台揚科技股份有限公司
ISO 9001 Certified
MICROELECTRONICS TECHNOLOGY INC.
MTI RFID Reader Operation Manual
43-RFID0900-E1-MANUAL
PAGE: 20
DATE: 18-04-2006
4.3.5 Write Data to Tag
Step 1: Select which antenna to write data to tag.
Step 2: Click the Scan button to search the tag in the range of antenna.
台揚集團智慧財產
任何未經授權逕予複製、重製、公開或使用本文之行為，將被視為侵害
台揚集團之智慧財產權，將可因此負擔法律責任。
MTI Group Proprietary Information
Any unauthorized use, duplication, reproduction, or disclosure of this document may be
considered as infringement of MTI Group’s intellectual property rights, the infringer may
be accused and liable applicable legal penalties.
台揚科技股份有限公司
ISO 9001 Certified
MICROELECTRONICS TECHNOLOGY INC.
MTI RFID Reader Operation Manual
43-RFID0900-E1-MANUAL
PAGE: 21
DATE: 18-04-2006
Step 3: Fill up the four columns of the new tag ID.
Step 4: Click the Lock button, then the button will change to Unlock.
台揚集團智慧財產
任何未經授權逕予複製、重製、公開或使用本文之行為，將被視為侵害
台揚集團之智慧財產權，將可因此負擔法律責任。
MTI Group Proprietary Information
Any unauthorized use, duplication, reproduction, or disclosure of this document may be
considered as infringement of MTI Group’s intellectual property rights, the infringer may
be accused and liable applicable legal penalties.
台揚科技股份有限公司
ISO 9001 Certified
MICROELECTRONICS TECHNOLOGY INC.
MTI RFID Reader Operation Manual
43-RFID0900-E1-MANUAL
PAGE: 22
DATE: 18-04-2006
Step 5: Click the Write Tag button.
Step 6: If write command success done, click Unlock to re-scan. And the new
tag ID will display.
台揚集團智慧財產
任何未經授權逕予複製、重製、公開或使用本文之行為，將被視為侵害
台揚集團之智慧財產權，將可因此負擔法律責任。
MTI Group Proprietary Information
Any unauthorized use, duplication, reproduction, or disclosure of this document may be
considered as infringement of MTI Group’s intellectual property rights, the infringer may
be accused and liable applicable legal penalties.
台揚科技股份有限公司
ISO 9001 Certified
MTI RFID Reader Operation Manual
43-RFID0900-E1-MANUAL
MICROELECTRONICS TECHNOLOGY INC.
PAGE: 23
DATE: 18-04-2006
Chapter 5 – Specification
This chapter describes the specification for MTI RFID RU-813 Reader
Operating Frequency
910-920 MHz
RF output power
29dBm
RFID protocol
EPC C1G2 V1.09
Humility
0~99% Non-Condensing
Modulation
Amplitude Modulation
Operation Channels
51
Occupied Channel 20dB Bandwidth
200KHz
Operating Temperature
-20 ~ +50 degree C
Storage Temperature
-40 ~ +70 degree C
Antena
8 port TX/RX Separate for 4 reading points/
6 dBi circular polarization
Power Supply
12VDC/Max 2A
Communication interface
RJ45
LAN Interface
Ethernet/TCP/IP
Indicators
Power/TX/RX
Dimension
230 mm x 264 mm x 40mm
Weight
1.365 kG /2.989 lb
台揚集團智慧財產
MTI Group Proprietary Information
任何未經授權逕予複製、重製、公開或使用本文之行為，將被視為侵害
台揚集團之智慧財產權，將可因此負擔法律責任。
Any unauthorized use, duplication, reproduction, or disclosure of this document may be
considered as infringement of MTI Group’s intellectual property rights, the infringer may
be accused and liable applicable legal penalties.

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.5
Linearized                      : No
Encryption                      : Standard V2.3 (128-bit)
User Access                     : Print, Copy, Extract, Print high-res
Page Count                      : 23
Page Layout                     : OneColumn
XMP Toolkit                     : XMP toolkit 2.9.1-13, framework 1.6
About                           : uuid:5036cc5f-3a14-40fc-a239-aa7648a18ac2
Producer                        : Acrobat Distiller 7.0.5 (Windows)
Company                         : QA of MTI
Source Modified                 : D:20060418050028
Headline                        : 
Create Date                     : 2006:04:18 13:14:34+08:00
Creator Tool                    : Acrobat PDFMaker 7.0.7 for Word
Modify Date                     : 2006:04:26 16:07:22+08:00
Metadata Date                   : 2006:04:26 16:07:22+08:00
Document ID                     : uuid:143fb46f-1b51-4037-be0b-05526d8fb02f
Instance ID                     : uuid:ae6ef7f8-2528-43d6-a030-82b766c38522
Version ID                      : 13
Format                          : application/pdf
Title                           : CCCCCCCCCCCC
Creator                         : QA
Subject                         : 
Tagged PDF                      : Yes
Author                          : QA

EXIF Metadata provided by EXIF.tools