Microhard Systems 12XA58-26 High Power MiniPCI 5.8GHz User Manual XA58 26 manual 120504

Download:
Mirror Download [FCC.gov]
Document ID	1694104
Application ID	daMk1b4rNnCc8Thj+PKVvA==
Document Description	Users Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	211.22kB (2640298 bits)
Date Submitted	2012-05-09 00:00:00
Date Available	2012-05-09 00:00:00
Creation Date	2012-05-08 16:20:16
Producing Software	Ultra PDF
Document Lastmod	2012-05-10 06:35:18
Document Title	Microsoft Word - XA58-26 manual_120504.doc
Document Creator	XA58-26 manual_120504.doc - Microsoft Word
Document Author:	pdscn-88

High Power MiniPCI 5.8GHz
XA58-26
Features
•
Compliant with IEEE 802.11a standard
•
Up to 26dBm output power with Built-in ESD Protection
•
RF ESD/EMP Immunity Threshold: 15KeV
•
•
•
Supports Atheros Proprietary "Super Mode" delivering up to 108 Mbps data link rate
•
•
Multi-Country Roaming Supported (IEEE802.11d Global Harmonization Standard)
•
•
Suitable for Embeded System or OEM Project
①
High efficiency dual-PA design
High Performance combined with Low Power Consumption
Single MMCX/U.FL Antenna Connector
Affordable and Ideal for a Variety of Applications
Technical Specifications
Chipset
Atheros AR54xx series（AR5414）
Host Interface
Operating
Voltage
32-bit mini-PCI Type IIIA+ (1.85mm longer than IIIA type)
Power
Consumption
3.3 VDC
11a Cont. Tx @6M
11a Cont. Rx
Standby
3.5W
1.9W
1.4W
Antenna
Connector
Standards
Conformance
IEEE 802.11a:
Super-A:
54Mbps
108Mbps
Frequency
Range
IEEE
802.11a
5.725 ~ 5.850 GHz (US & Canada)
Modulation
Techniques
Certification
ROHS
Compliance
Temperature
Range
1 x MMCX
48Mbps
96Mbps
36Mbps
72Mbps
24Mbps 18Mbps 12Mbps 9Mbps 6Mbps
54Mbps 48Mbps 36Mbps 24Mbps 18Mbps 12Mbps 6Mbps
OFMD: BPSK, QPSK, 16-QAM, 64-QAM
FCC, CE
Yes
Dimension
Operating: -20ºC to 70ºC
Storage: -40ºC to 90º
Operating: 5% to 95% (non-condensing)
Storage: Max.90% (non-condensing)
59.6 x52.8x 5.5 mm
Weight
20 grams
Humidity
WLM54A-26-ESD MINIPCI CARD RADIO
5GHz
6Mbps
9Mbps
12Mbps
18Mbps
24Mbps
36Mbps
48Mbps
54Mbps
TX SPECIFICATIONS
5600MHz 5700MHz 5785MHz 5825MHz
26dBm
26dBm
26dBm
26dBm
26dBm
24dBm
23dBm
22dBm
26dBm
26dBm
26dBm
26dBm
26dBm
24dBm
23dBm
22dBm
26dBm
26dBm
26dBm
26dBm
26dBm
24dBm
23dBm
22dBm
26dBm
26dBm
26dBm
26dBm
26dBm
24dBm
23dBm
22dBm
Tolerance
+1.0/-1.5 dB
+1.0/-1.5 dB
+1.0/-1.5 dB
+1.0/-1.5 dB
+1.0/-1.5 dB
+1.0/-1.5 dB
+1.0/-1.5 dB
+1.0/-1.5 dB
RX SPECIFICATIONS
DataRate Sensitivity
Tolerance
6Mbps
-96dBm
±2dB
9Mbps
-96dBm
±2dB
12Mbps
-95dBm
±2dB
-88dBm
±2dB
5GHz 18Mbps
24Mbps
-86dBm
±2dB
36Mbps
-83dBm
±2dB
48Mbps
-79dBm
±2dB
54Mbps
-76dBm
±2dB
ADJUSTABLE CHANNEL SIZE SUPPORT
10MHz
20MHz
5MHz
ESD CABLE SPECIFICATIONS
26cm length
Copper
End of ESD Cable tied to Earth Ground
Cable Dimensions
Terminal Material
Attachment Procedure
②
ORDERING INFORMATION
•
②
CODES
Version
WLM54A26ESD 8BS
ESD
CARTON DIMENSIONS
For 50 pcs / carton,
0.45m*0.45m*0.24m/0.006=8.1KG
Module grounding cable included
Configurations are subjected to change without notice
Please contact Compex sales representatives for other available configurations
40MHz
Compliance Information
FCC Compliance Statement:
This device complies with Part 15 of the FCC Rules . Operation is subject to the
following two conditions:
1. This device may not cause harmful interference, and
2. This device must accept any interference received, including
interference that may cause undesired operation. This device must accept
any interference received, including interference that may cause
undesired operation. Product that is a radio transmitter is labeled with FCC ID.
FCC Caution:
(1) Exposure to Radio Frequency Radiation. This equipment must be
installed and operated in accordance with provided instructions and the
antenna(s) used for this transmitter must be installed to provide a
separation distance of at least 20 cm from all persons and must not be
collocated or operating in conjunction with any other antenna or transmitter.
End-users and installers must be provided with antenna installation
instructions and transmitter operating conditions for satisfying RF exposure
compliance.
(2) Any changes or modifications not expressly approved by the grantee
of this device could void the user's authority to operate the equipment.
(3) This Transmitter must not be co-located or operating in conjunction with
any other antenna or transmitter.
(4) Changes or modifications to this unit not expressly approved by the
party responsible for compliance could void the user authority to operate
the equipment.
(5) Outdoor Operations in the 5.15~5.25GHz band is prohibited.
IMPORTANT NOTE: In the event that these conditions can not be met (for
example certain laptop configurations or co-location with another
transmitter), then the FCC authorization is no longer considered valid and
the FCC ID can not be used on the final product. In these circumstances,
the OEM integrator will be responsible for re-evaluating the end product
(including the transmitter) and obtaining a separate FCC authorization.
WARNING: This Wireless Mini PCI Adapter does not support ad-hoc mode
Function
The Host system using XA58-26, should have label indicated "Contains FCC ID: NS912XA58-26"
IC warning
- English:
This device complies with Industry Canada licence-exempt RSS standard(s).
Operation is subject to the following two conditions:
(1) this device may not cause interference, and
(2) this device must accept any interference, including interference that may cause
undesired operation of the device.
2. Changes or modifications not expressly approved by the party responsible for
compliance could void the user's authority to operate the equipment.
- French:
Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils
radio exempts de licence. L'exploitation est autorisée aux deux conditions suivantes :
(1)l'appareil ne doit pas produire de brouillage, et
(2) l'utilisateur de l'appareil doit accepter tout brouillage radioélectrique subi, même si le
brouillage est susceptible d'en compromettre le fonctionnement."
Exposure to Radio Frequency Radiation:
This equipment must be installed and operated in accordance with provided instructions
and the antenna(s) used for this transmitter must be installed to provide a separation
distance of at least 20 cm from all persons and must not be collocated or operating in
conjunction with any other antenna or transmitter. End-users and installers must be
provided with antenna installation instructions and transmitter operating conditions for
satisfying RF exposure compliance.
Transmitter Antenna
Under Industry Canada regulations, this radio transmitter may only operate using an
antenna of a type and maximum (or lesser) gain approved for the transmitter by Industry
Canada. To reduce potential radio interference to other users, the antenna type and its
gain should be so chosen that the equivalent isotropically radiated power (e.i.r.p.) is not
more than that necessary for successful communication.
This radio transmitter (Model XA58-26, IC: 3143A-12XA5826) has been approved by
Industry Canada to operate with the antenna types listed below with the maximum
permissible gain and required antenna impedance for each antenna type indicated.
Antenna types not included in this list, having a gain greater than the maximum gain
indicated for that type, are strictly prohibited for use with this device.
The max antenna gain is 2.00 dBi for test
The Host system using XA58-26, should have label indicated "Contains IC: 3143A-12XA5826"
DIMENSIONS DRAWING
Compex Systems Pte., Ltd.
135 Joo Seng Road, PM Industrial Building #08-01,
Singapore 368363
Tel: (65) 6286 2086
Fax: (65) 6280-9947
Email: sales@compex.com.sg
Compex (Suzhou) Co., Ltd.
NO.12, ChuangTou Industrial Square,
LouFeng North, Suzhou Industrial Park,
Suzhou, Jiangsu Province, China 215122
Tel: (86)-512-62950050
Fax: (86)-512-62950026
Copyright © 2010 Compex Systems. All rights reserved. COMPEX and the COMPEX logo, are registered trademarks of COMPEX Inc. While every effort
is made to ensure the information is accurate, Compex does not accept liability for any errors or mistakes that may arise. All specification is subject to
change without notice. Datasheet Version: V 1.1.1 Rocky100528
For more information, visit www.compex.com.sg

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.6
Linearized                      : No
XMP Toolkit                     : Adobe XMP Core 4.0-c321 44.398116, Tue Aug 04 2009 14:24:39
Create Date                     : 2012:05:08 16:20:16-08:00
Creator Tool                    : XA58-26 manual_120504.doc - Microsoft Word
Modify Date                     : 2012:05:10 06:35:18+08:00
Metadata Date                   : 2012:05:10 06:35:18+08:00
Format                          : application/pdf
Creator                         : pdscn-88
Title                           : Microsoft Word - XA58-26 manual_120504.doc
Producer                        : Ultra PDF
Document ID                     : uuid:764debfc-6eaa-4bdc-8c14-ae2846675cb9
Instance ID                     : uuid:c7b584eb-67a1-4b1e-8787-63bbd98d25fc
Page Count                      : 5
Author                          : pdscn-88

EXIF Metadata provided by EXIF.tools