Microlab Electronics MD212 MULTIMEDIA SPEAKER User Manual 1

Microlab Electronics Co.,Ltd. MULTIMEDIA SPEAKER 1

User Manual

MD212www.microlab.cnMicrolab Electronics Company Ltd.Made in China© 2012 All rights reservedDisclaimer: All symbols and logos belong to the respective brand holder or registered holder. All specifications and information are subject to changes without further notice. Slight variations and differences might appear between the printed photos and actual product due to product enhancement.The Bluetooth® word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any use of such marks by Microlab Electronic Co., Ltd is under license. other trademarks and trade names are those of their respective owners.QDID: B01988980-MD220-97-0001-01 2012-02-0780-MD212-97-0001-01 2012-11-12
Caution:To reduce the risk of electric shock, do not dismantle the product and do not expose the apparatus to rain or moisture. No user-serviceable parts inside. Refer servicing to qualified personnel only.Explanation of Graphical Symbols:The lightning flash within an equilateral triangle is intended to alert you to the presence of uninsulated dangerous voltage within the product's enclosure that may be of sufficient magnitude to constitute an electric shock to a person or persons.The exclamation point within an equilateral triangle is intended to alert you to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the product.English 2WARNINGS:1. Read Instructions - All the safety and operating instructions must be read before the product is operated.2. Retain Instructions - The safety and operating instructions should be kept with the product for future reference.3. Heed warnings - All warnings on the product and in the operating instructions should be adhered to.4. Follow instructions - All operating and users instructions should be followed.5. Installation - Install in accordance with the manufacturer's instructions.6. Power sources - This product should be operated only from the type of power source indicated by the marking adjacent to the power cord entry. If you are not sure of the type of power supply to your home, consult your product dealer or local power company.7. Grounding or polarization - the product is not required to be grounded. Ensure the plug is fully inserted into the wall outlet or extension cord receptacle to prevent blade or pin exposure. Some versions of the product are equipped with a power cord fitted with a polarized alternating line plug (a plug having one blade wide than the other). This plug will fit onto the power outlet only one way. This is a safety feature. If you are unable to insert the plug fully into the outlet, try reversing the plug. If the plug should still fail to fit, contact your electrician to replace your obsolete outlet. Do not defeat the safety purpose of the polarized plug. When using an extension power-supply cord or a power-supply cord other than that supplied with the product, it should be fitted with the appropriate molded plugs and carry safety approval appropriate to the country of use.8. Power cord protection - Power-supply cords should be routed so that they are not likely to be walked on, kinked or pinched by items placed on or against them, paying particular attention to cords from plugs, receptacles and the point where they exit from the appliance.9. Overloading - Do not overload wall outlets, extension cords or multiple sockets, as this can result in a risk 80-MD220-97-0001-01 2012-02-0780-MD212-97-0001-01 2012-11-12
of fire or electric shock.10. Ventilation - The product must be properly ventilated. Do not place the product on a bed, sofa, or other similar surface. Do not cover the product with any items such as tablecloths, newspapers, etc.11. Heat - The product should be situated away from heat sources such as radiators, heat registers, stoves, or other products including amplifiers that produce heat. No naked flame sources, such as lighted candles, should be placed on the apparatus.12. Water and moisture - To reduce the risk of fire or electric shock, do not expose the product to train, dripping, splashing or excessive moisture such as in a sauna or bathroom. Do not use this product near water, for example, near a bathtub, washbowl, kitchen sink, laundry tub, in a wet basement, or near a swimming pool, or etc.13. Object and Liquid Entry - Never push objects of any kind into this product through openings, as they may touch dangerous voltage points or short-circuit parts that could result in a fire or electric shock. Never spill liquid of any kind on the product. Do not place any object containing liquid on top of the product.14. Cleaning - Unplug the product from the wall outlet before cleaning. The cabinet of the subwoofer may be cleaned by dusting with a dry cloth. If you wish to use an aerosol cleaning spray, do not spray directly on the cabinet; spray onto the cloth. Be careful not to damage the drive units.15. Attachments - Do not use attachments not recommended by the product manufacturers, as they may cause hazards.16. Accessories - Do not place this product on an unstable cart, stand, tripod, bracket or table. The product may fall, causing serious injury to a child or adult, and serious damage to the product. Use only with a cart, stand, tripod, bracket or table recommended by the manufacturer or sold with the product. Any mounting of the product should follow the manufacturers’ instructions and should use a mounting accessory recommended by the manufacturer.17. Moving the product - A product and cart combination should be moved with care. Quick stops, excessive force and uneven surfaces may cause the product and cart combination to overturn.18. Un-use periods - The power cord of the device should be unplugged from the outlet during lightning storms or when the apparatus is left unused for a long period of time.19. Servicing - Do not attempt to service this product yourself, as opening or removing covers may expose you to dangerous voltage or other hazards. Refer all servicing to qualified service personnel.20. Please remove the power plug form the main power source or wall power source when not in use. When plugged in to a power source, the system is in standby mode, so the power is not entirely cut off. 21. Replacement parts - When replacement parts are required, ensure the service technician has used replacement parts specified by the manufacturer or have the same characteristics as the original part. Unauthorized substitutions may result in fire, electric shock or other hazards.22. Mains fuses - For continued protection against fire hazard, use fuses only of the correct type and rating. The correct fuse specification for each voltage range is marked on the product.23. Do not turn up the volume while listening to a section with very low level inputs or no audio signals. If you do, the speaker may be damaged when a peak level section is suddenly played.24. The only means of completely disconnecting the product from the power supply is by removing the power cord from the wall outlet or the product. The wall outlet or the power cord entry to the product must remain freely accessible at all times while the product is in use.25. Try to install the product near a wall socket or extension cord and shall be easily accessible.26. The highest environmental temperature suitable for this product is 40°C.FCC STATEMENT1. This device complies with Part 15 of the FCC Rules.Operation is subject to the following two conditions:(1) This device may not cause harmful interference, and(2) This device must accept any interference received, including interference that may cause undesired operation.2. Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.Enhance and power your tablet’s music and sound. Compact design and small soundbar system with two quality speaker drivers. Broaden your tablet sound range and listen to distinct sound effects. Stream music wirelessly from your smartphone, tablet, or even your notebook. Listen to enhanced amplified sound from your favourite gadgets. Connects to any products with Bluetooth® wireless technology using A2DP and HFP profiles. Talk and pickup your smart phone calls directly with built-in speaker phone feature. Easy connection with alternative 3.5mm stereo plug for wide range gadget support. Mount your tablet or smart phone in front with quick pull-out tray. Comes with rechargeable battery for portability. Travel with your tablet, or smartphone, and enjoy to enhanced sound everywhere you go.80-MD220-97-0001-01 2012-02-0780-MD212-97-0001-01 2012-11-12FCC EXPOSURE STATEMENT:This equipment complies with FCC radiation exposure limits setforth for an uncontrolled environment.This equipment should be installed and operated with minimum distance 20cm between theradiator & your body
Wireless music streaming with Bluetooth® wireless technologySupports A2DP and HFP profilesQuality stereo speaker system with built-in amplifierIdeal for movies, gaming, music and PC applicationsClear and uncoloured soundSoundbar type designConnects to any 3.5mm stereo jack easily e.g., tablet, PC, notebook, Mp3/Mp4, CD/DVD player, etc.Rechargeable battery with easy replacementMD212 speaker 1 pcUSB cable 1 pcRechargeable battery, BL-5C 1 pcUser manual 1 pcFront ViewEN61 2 3Connect to3.5 mm stereojackAudioinput jackon playbackdeviceHandsfree function LED: AUX / Bluetooth Pairing3.5 mm stereo plug Charging LED Mini-USB Off/AUX/BluetoothSupport leg Battery compartment Audio cable recessTopviewRearviewRightLeftIllustrationsFeaturesPacking ListConnection (AUX)+IBL-5CBattery orientationSwitch to AUX modePull out tray andmount tablet orsmartphone80-MD220-97-0001-01 2012-02-0780-MD212-97-0001-01 2012-11-12
1 2 354Top viewPull tray outConnection (Bluetooth®)7orswitch toBluetooth® mode Turn on Bluetooth® pairing mode: a) Pairing timeoutb) Change pairing smartphonePairing mode: Blue LED blink rapidlySmartphone:Turn onBluetooth®modeScan for devices7Pair with thespeaker9Select “connect” with speaker6PairingprocessEN88Paired not connectedmore than2 secs80-MD220-97-0001-01 2012-02-0780-MD212-97-0001-01 2012-11-12
BL-5CUSB charging LED (red when charging / illumination off - full charged)Mini-USBUSB cableBL-5C type Lithium battery(Battery to remain in compartment during usage)Power from PC / Notebook / USB hub111012Connectedto speakerCommence music playbackPlace the smartphone or tabletupright on the tray# smartphone and tablet not included in package. Trademar ks and logos belong to their respective owners.EN109Bottom viewSwing open for additional supportSupport legs1) Charge for 4 hours before initial use2) During use, charge till red LED turns offBlue LEDilluminatessteadily80-MD220-97-0001-01 2012-02-0780-MD212-97-0001-01 2012-11-12
-+134Startplaybackon media player such as smartphone, tablet,iPad, notebook orMp3/Mp4 playerMedia playerOutput power: 2 Watt RMSPower distribution: 1 Watt x 2 RMSHarmonic distortion: < 0.5% 1 W 1 kHzFrequency response: 150 Hz - 20 kHzSignal/Noise ratio: > 75 dBSeparation: > 45 dBDriver type: 1.5" x 2Driver rated power: 3 Watt x 2, 4 OhmInput: 3.5mm stereo, Mini-USBBluetooth® wireless technology Bluetooth® v2.1, A2DP, HFPBattery, BL5C 3.7 V / 1000 mAh Lithium rechargeable batteryPowerAmplifierSpeakerInterface2orAUX mode: from 3.5 mm plug Bluetooth® mode: initiate pairing and connectionTechnical InformationFrequently Asked QuestionsQuestion AnswerPairing failed Ensure device supports Bluetooth® v2.1 and aboveHow to tell Pairing is successful?Blue LED is lit steadily, please start the music playbackBattery charging and use Initial charge for 4 hours, andkeep battery inside during use11 1280-MD220-97-0001-01 2012-02-0780-MD212-97-0001-01 2012-11-12

Navigation menu