Microlab Electronics SLATE BLUETOOTH SPEAKER User Manual 1
Microlab Electronics Co.,Ltd. BLUETOOTH SPEAKER 1
User Manual_Slate
| Download: |  |
| Mirror Download [FCC.gov] | |
| Document ID | 3801426 |
| Application ID | yEhuA3R9mwemZ7OnhszS0A== |
| Document Description | User Manual_Slate |
| Short Term Confidential | No |
| Permanent Confidential | No |
| Supercede | No |
| Document Type | User Manual |
| Display Format | Adobe Acrobat PDF - pdf |
| Filesize | 158.79kB (1984848 bits) |
| Date Submitted | 2018-03-29 00:00:00 |
| Date Available | 2018-03-29 00:00:00 |
| Creation Date | 2018-03-30 02:19:26 |
| Producing Software | GPL Ghostscript 9.21 |
| Document Lastmod | 2018-03-30 02:19:26 |
| Document Title | 未命å -1 |
| Document Creator | CorelDRAW X6 |
| Document Author: | æŽå°å‹‡ |
Slate User Manual NFC www.microlab-global.com Microlab Electronics Co., Ltd. Made in China FCCID:OR8-S LATE IC:21231-SLATE Disclaimer: All symbols and logos belong to the respective brand holder or registered holder. All specifications and information are subject to changes without further notice. Slight variations and differences might appear between the printed photos and actual product due to product enhancement. Microlab Slate Bluetooth Speaker System Prior to initial use, please read the manual carefully ETL certification declaration 15. The highest environmental temperature suitable for this product is 0℃ to 35℃ for indoor use only . 16. Appliable to altitude below 2000 meters DU When apparatus operation and installation instructions contain instructions contain instructions for use by service personnel, such instructions shall be separate in format from other instructions and preceded by the word “CAUTION” and the following or the equivalent. “These servicing instructions are for use by qualified service personnel only. To reduce the risk of electric shock do not perform any servicing other than that contained is the operating instructions unless you are qualified to do so” FCC and Canada EMC Compliance Information This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. Any Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction. This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions: (1) This device may not cause interference, and (2) This device must accept any interference, including interference that may cause undesired operation of the device. Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de licence. L'exploitation est autorisée aux deux conditions suivantes: (1) l'appareil ne doit pas produire de brouillage, et (2) l'utilisateur de l'appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d'en compromettre le fonctionnement. L'appareil a été évalué pour répondre aux exigences générales d'exposition aux RF. L'appareil peut être utilisé dans une condition d'exposition portable sans restriction. Introduction Beautifully designed 2.1 speaker system with powerful sound. Power your multimedia player with this system and listen to clear sound. Comes with two stereo satellites for highs and mids sound reproduction. Ultra-low frequency subwoofer with bass reflex tunnel for deeper sound and bass effects. This platinum version features a beautifully crafted subwoofer cabinet and acrylic satellite speakers. ideal for music appreciation and entertainment. Connects easily to your media player via universal 3.5 mm stereo plug. Features wired remote control for quick master volume control, and interfaces for audio input and headphones connections. Features Powerful 2.1 speaker system Perfect for multimedia player and PC High quality speaker drivers used for quality sound characteristics Full audio spectrum performances, ideal for your favourite entertainment from Mp3, Mp4, CD/DVD movies and digital playbacks Bass reflex tunnel built-in subwoofer for deep bass and vocals Wired remote control with rotary volume dial Audio input jack - 3.5 mm stereo Headphones jack for private listening Package contents Slate subwoofer Slate satellites Slate wired control User manual 1 pc 2 pcs 1 pc 1 pc Alternative listening mode: plug to headphones, main speaker system mute. 3.5 mm stereo jack: headphones Illustrations Connections Front view Media Player Subwoofer AS S S Y ST Right Satellite X- Left Satellite CD / VCD / DVD Blu-ray Player TV To 3.5 mm stereo jack Wired remote control Remote control Remote control Subwoofer side panel REMOTE CONTROL Remote control DIN jack BASS volume knob Wired cable junction Power LED Audio output: to satellites Rotary volume AC input junction Audio input 3.5 mm / Headphones 3.5 mm Power switch Ideal listening position and placement FL - front left satellite FR - front right satellite SW - subwoofer Prior to initial use: Please ensure AC ratings matched that of country in use. Mp3 / Mp4 / Media Player PC or Notebook Subwoofer side panel Left satellite Right satellite AC Power Supply ACIN:100 - 240V ~50/60Hz500mA Connections and Operation Connections Prior to connecting the speakers, ensure the AC power plug is unplugged from the AC source. Secondly ensure the volume knob is set to minimum. 1. Connect the satellites to the left and right RCA outputs at the side panel of the subwoofer. 2. Place both satellites on extreme sides of the listening position. Place the subwoofer on the floor and with its back near the wall for more bass. 3. Connect the AC power cord to the power supply source. 4. Please ensure the AC power supply match the power requirement printed at the side panel. Wireless (Bluetooth®) 1. Please turn on the speaker system with the power switch situated at the side panel of the subwoofer. 2. The system will commence the Bluetooth® pairing process immediately. Please note that the system will always default to this process everytime it is turned on. 3. Have your Bluetooth® enabled device activated for Bluetooth broadcast. For connection to the speaker system, please ensure the Bluetooth® device supports A2DP profile. 4. Once your device detects the system, it should display the “Slate” name on its display screen. 5. Select pairing, and then connect functions to commence the A2DP audio streaming mode. The blue LED will illuminate steadily. Slate Slate Slate Slate 6. To disable the mode, simply disconnect the Bluetooth® connection in your device. Continued Technical Information Analog 1. Connect the 3.5 mm plug end from the wired remote control to your media device, such as Mp3/Mp4, CD/DVD player, LCD TV, smartphone, tablet, or notebook. 2. Please ensure any connected Bluetooth® device is turned off, else the signal will continue to stream via Bluetooth® mode. 3. Alternatively, you can connect a 3.5 mm plug from the media player to the side of the wired remote control. 50 Watt RMS 12 Watt x 2+ 26 Watt RMS < 0.5% 1 W 1 kHz 35 Hz - 20 kHz > 75 dB > 40 dB Operations 1. Ensure the master volume is at the lowest setting. 2. Turn on the main AC power and switch on the speaker system from the rear power switch. 3. Start the media player and song. For Bluetooth® enabled device, please start the music playback apps. For Analog connection, start the playback from the Mp3/Mp4 player or notebook, etc. 4. Adjust the volume on the media player, and speaker’s master volume to your preferred listening level. The master volume is located at the side panel of the right speaker. 5. For added sound effects, you can adjust the bass levels on the side panel. 6. Note: it is advisable not to turn the volume too loud or to its extreme volume limit to avoid damage to the speaker driver material and impair your hearing. Always adjust in slow increment. 7. The system will conserve energy if there are no audio signal detected after 20 minutes. It will enter sleep mode till it detects audio signal again. The LED will blink slowly in red colour if it is in AUX mode, and in blue colour if it is in Bluetooth® mode. NFC (Nearfield communication) This function allows any NFC enabled device to easily connect to the speaker system by placing near the NFC logo. 1. To use the NFC function, just tap the NFC enabled device on the NFC logo at the top of the remote control. 2. This will connect the system to this device, and disconnect any previous connected device. 3. Once connected, you can commence the music playback as mentioned above. Tweeter driver type: Tweeter impedance: Woofer driver type: Woofer impedance: 2.5" 4 Ohm 5.25" 8 Ohm Wireless 2RCA, Output 2 - remote control: 3.5 mm Headphones DIN jack, Input 2 - remote control: 3.5 mm stereo NFC supported Troubleshooting Questions Check if the main power is turned on Check if all connectors are properly inserted No sound heard Check if the audio source is working well Check if the media player is playing the audio source Check if the volume level is turned up One or more satellite no sound Sound is distorted or unclear Tap once on the NFC logo (top of right speaker), or place near the logo Speaker connects immediately to NFC enabled device, previous device is disconnected. Solutions Power LED won’t light up Check if the satellite cables are not kinked and properly connected. Check source cable is correctly inserted to the correct jack. Ensure the media file or format is of the supported type. Ensure the bit rate recorded on the digital file is above 192 Kbps, for clearer reproduction. Check all cables for damaged or failed copper wire. What are the products supported? Any media player with 3.5 mm stereo jack such as smartphones, tablets, Mp3/Mp4 players, CD/DVD players, LCD TV, PC or notebooks. For NFC, the media device must be NFC enabled. What the perfect location to place the subwoofer? Subwoofer is non-directional, so it can be placed anywhere. But for deeper bass, it is preferably to place it on the floor and with its back to the wall. Alternative input connection: via 3.5 mm stereo jack on remote control 3.5 mm stereo jack: audio input 2
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.6 Linearized : Yes Encryption : Standard V4.4 (128-bit) User Access : Print, Copy, Extract, Print high-res XMP Toolkit : Adobe XMP Core 4.2.1-c041 52.342996, 2008/05/07-20:48:00 Format : application/pdf Creator : 李小勇 Title : 未命名 -1 Create Date : 2017:11:03 16:11:57+08:00 Creator Tool : CorelDRAW X6 Modify Date : 2018:03:29 16:58:22+08:00 Metadata Date : 2018:03:29 16:58:22+08:00 Producer : Corel PDF Engine Version 16.1.0.843 Document ID : uuid:51cbd448-816d-4efc-b5ae-c7aa98704580 Instance ID : uuid:69069e6e-9fa5-4b98-8fba-0fa6a6a1968f Page Count : 5 Profile CMM Type : Linotronic Profile Version : 2.1.0 Profile Class : Display Device Profile Color Space Data : RGB Profile Connection Space : XYZ Profile Date Time : 1998:02:09 06:49:00 Profile File Signature : acsp Primary Platform : Microsoft Corporation CMM Flags : Not Embedded, Independent Device Manufacturer : Hewlett-Packard Device Model : sRGB Device Attributes : Reflective, Glossy, Positive, Color Rendering Intent : Perceptual Connection Space Illuminant : 0.9642 1 0.82491 Profile Creator : Hewlett-Packard Profile ID : 0 Profile Copyright : Copyright (c) 1998 Hewlett-Packard Company Profile Description : sRGB IEC61966-2.1 Media White Point : 0.95045 1 1.08905 Media Black Point : 0 0 0 Red Matrix Column : 0.43607 0.22249 0.01392 Green Matrix Column : 0.38515 0.71687 0.09708 Blue Matrix Column : 0.14307 0.06061 0.7141 Device Mfg Desc : IEC http://www.iec.ch Device Model Desc : IEC 61966-2.1 Default RGB colour space - sRGB Viewing Cond Desc : Reference Viewing Condition in IEC61966-2.1 Viewing Cond Illuminant : 19.6445 20.3718 16.8089 Viewing Cond Surround : 3.92889 4.07439 3.36179 Viewing Cond Illuminant Type : D50 Luminance : 76.03647 80 87.12462 Measurement Observer : CIE 1931 Measurement Backing : 0 0 0 Measurement Geometry : Unknown Measurement Flare : 0.999% Measurement Illuminant : D65 Technology : Cathode Ray Tube Display Red Tone Reproduction Curve : (Binary data 2060 bytes, use -b option to extract) Green Tone Reproduction Curve : (Binary data 2060 bytes, use -b option to extract) Blue Tone Reproduction Curve : (Binary data 2060 bytes, use -b option to extract) Author : 李小勇EXIF Metadata provided by EXIF.tools