Microlab Electronics TYCOON BLUETOOTH SPEAKER User Manual 1

Microlab Electronics Co.,Ltd. BLUETOOTH SPEAKER 1

User manual

80-MD336-97-0001(US)-01,2017-11-6User’s ManualATTE NTIO N:RISQ UEDECH OCELE CTRI QUE-N EPASOUVR IRRIS K OF ELEC TRIC SH OCK DO NO T OPENFCC and Canada EMC Compliance InformationThis device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:Reorient or relocate the receiving antenna.Increase the separation between the equipment and receiver.Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.Consult the dealer or an experienced radio/TV technician for help.Any Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction.This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions: (1) This device may not cause interference, and (2) This device must accept any interference, including interference that may cause undesired operation of the device.Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de licence. L'exploitation est autorisée aux deux conditions suivantes:(1) l'appareil ne doit pas produire de brouillage, et(2) l'utilisateur de l'appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d'en compromettre le fonctionnement.Remove all packaging from the unit.Retain the Packaging.If you dispose of it please do so sccording to local regulations.The following items are included:3.5mm-2RCA CableSpeakerUserManualPower adapterFCCID:OR8-TYCOONIC:21231-TYCOONIntroductionTycoonManual
ONOFFRLAUDIO INPUTAudio connectionST-BY: StandbyCLOCK： Clock adjustment : Bluetooth pairing, play/pauseINPUT: Input mode select12:15 ： Next track ： Previous track-VOLUME+ :Volume Knob (Press to pop out)IIIustration 22 Watt RMS11 Watt x 2 RMS＜0.8% 1W 1kHz ＞75 dB＞45 dB50 Hz - 20 KHz 3"x 2 DC15V, 1.5AOutput powerPower distributionHarmonic distortionSignal/Noise ratioSeparationFrequency responseTweeter driver typeAudio inputInput voltageAudio cable BluetoothConnectionsTechnical SpecificationsSpeaker will not turn on(AC power)Speaker will not turn on(battery power)No SoundCannot pair correctly withthe Bluetooth deviceWhat are the productssupported?Sound is distortedMake sure your system is connectedto a working AC(mains) outlet.Make sure you are using the Microlabpower supply that shipped with yourspeaker, or a Microlab accessorycharger designed for the Tycoon speakerBattery may be in protection mode ordischarged. Connect to working ACoperational mode. Check if the media player is correctlyconnected. Check if the Bluetoothconnection is correctly paired andconnected. Please remove previously paired devicesfrom your audio devices, and the “search for devices”again.Reconnect and try again.Any playback devices such assmartphone, tablet,PC, notebook,CD/DVD player, media players with3.5mm stereo plug, and Bluetooth.Check if the source file is not corrupted,play a different song and test.InstructionsAUX Mode1.Using AUX cable to connect source device with the speaker system on the rear panel.2.Connect the power cable to the speaker and plug it into the socket, turn on the power switch on the rear panel to power on.3.When it’s turned on, default to standby mode.Short press ST- BY button or rotate the knob to activate the speaker to AUX mode. The screen displays “AU”, ready to play music. Without signal received for 20 min, automatically enter standby mode. Bluetooth Mode1.After power on, press INPUT button to enter Bluetooth mode, “BL” blinks on the screen.2.Turn on Bluetooth on your mobile phone, search for “Tycoon” to connect. After connected successfully, the LED stop blinking with a prompt tone.3.Short press""to play/pause, long press to restart pairing. Press “ ” to rewind or forward the song. Without signal received for 20 min, automatically enter standby mode. Clock SettingPress “CLOCK” to select minute/hour adjustment, “”to minus/plus the digits. Without operation in 5 min, automatically switch to time display on the screen. USB ChargingUSB interface on the rear panel is applicable to charge devices like mobile phones. DC output 5V 1ATroubleshooting

Navigation menu