Microlife BP3GT1-6B Upper Arm Automatic Digital Blood Pressure Monitor User Manual GT1 6B Master IB

Download:
Mirror Download [FCC.gov]
Document ID	3301031
Application ID	bBq0FVWt1MrfZWg7CcZckg==
Document Description	user manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	388.06kB (4850749 bits)
Date Submitted	2017-03-01 00:00:00
Date Available	2017-08-29 00:00:00
Creation Date	2017-01-20 17:37:17
Producing Software	Acrobat Distiller 9.0.0 (Windows)
Document Lastmod	2017-02-22 15:57:21
Document Title	Microsoft Word - GT1-6B Master IB
Document Creator	PScript5.dll Version 5.2.2
Document Author:	ida.chen

Microlife BP3GT1‐6B Instruction Manual
v01
Model # BP3GT1‐6B
Microlife BP3GT1‐6B Instruction Manual
v01
Microlife BP3GT1‐6B Instruction Manual
v01
Microlife BP3GT1‐6B Instruction Manual
v01
Microlife BP3GT1‐6B Instruction Manual
v01
Microlife BP3GT1‐6B Instruction Manual
v01
Microlife BP3GT1‐6B Instruction Manual
v01
Microlife BP3GT1‐6B Instruction Manual
v01
Microlife BP3GT1‐6B Instruction Manual
v01
Microlife BP3GT1‐6B Instruction Manual
v01
10
Microlife BP3GT1‐6B Instruction Manual
v01
11
Microlife BP3GT1‐6B Instruction Manual
v01
12
Microlife BP3GT1‐6B Instruction Manual
v01
13
Microlife BP3GT1‐6B Instruction Manual
v01
14
Microlife BP3GT1‐6B Instruction Manual
v01
15
Microlife BP3GT1‐6B Instruction Manual
v01
16
Microlife BP3GT1‐6B Instruction Manual
v01
17
Microlife BP3GT1‐6B Instruction Manual
v01
18
Microlife BP3GT1‐6B Instruction Manual
v01
19
Microlife BP3GT1‐6B Instruction Manual
v01
20
Microlife BP3GT1‐6B Instruction Manual
v01
21
Microlife BP3GT1‐6B Instruction Manual
v01
22
Microlife BP3GT1‐6B Instruction Manual
v01
23
Microlife BP3GT1‐6B Instruction Manual
v01
24
Microlife BP3GT1‐6B Instruction Manual
v01
25
Microlife BP3GT1-6B Instruction Manual
an experienced radio/TV technician for help.
v01
or consult the dealer or
For body worn operation, this device has been tested and meets FCC RF exposure
guidelines. When used with an accessory that contains metal may not ensure
compliance with FCC RF exposure guidelines.
26
Microlife BP3GT1-6B Instruction Manual
v01
1. Weight:326 g(with batteries)
2. Size:82x160x35 mm
3. Storage/ transportation Condition: Temperature: -20℃ ~ +55℃ (Humidity: 15%
- 90% RH; non-condensed)
4. Operation Condition: Temperature: 10℃ ~ 40℃ (Humidity: 15% ~ 90% RH;
non-condensed)
5. Display: LCD-Display(Liquid Crystal Display)
6. Measuring method: Oscillometric
7. Pressure sensor: Capacitive
8. Measuring range:
Pressure (SYS/DIA): 20 to 280 mmHg
Pulse: 40 to 200 beats/per min
9. Cuff pressure display range:0-299 mmHg
10. Memory: Automatically stores the last 120 measurements for 2 users(total 240)
11. Measuring resolution: 1 mmHg
12. Accuracy: Pressure within ± 3 mmHg; Pulse ± 5% of the reading
13. Power source: a) 4 AAA batteries, 1.5 V ; b) Certificated AC adapter 6 V DC 600
mA(voltage 4.5 V DC to 6 V DC)
14. Accessories:
Wide range cuff for arm circumference 22-46 cm (8.7”-18.1”)
Cradle
Storage case
15. Adaptor Vendor: Deevan
16. Adaptor model: DSA-6E-05
17. atmospheric pressure：（80-105）KPa
Operating instructions
1) comfortably seated
2) legs uncrossed
3) feet flat on the floor
4) back and arm supported
5) middle of the CUFF at the level of the right atrium of the heart
27
Microlife BP3GT1‐6B Instruction Manual
v01
28
Microlife BP3GT1-6B Ins
Manual
v01
safety warning:
1. To avoid accidental strangulation, keep this product away from children and baby.
2. If this equipment is modified, appropriate inspection and testing must be conducted to
ensure continued safe use of equipment
3. Only use accessories provided with the equipment. Otherwise erroneous results will be
recorded.
4. regarding the effect of blood flow interference and resulting harmful injury to the
PATIENT caused by continuous CUFF pressure due to connection tubing kinking;
5. indicating that too frequent measurements can cause injury to the PATIENT due to blood
flow interference;
6. regarding the application of the CUFF over a wound, as this can cause further injury;
7. regarding the application of the CUFF and its pressurization on any limb where
intravascular access or therapy, or an arterio-venous (A-V) shunt, is present because of
temporary interference to blood flow and could result in injury to the PATIENT;
8. regarding the application of the CUFF and its pressurization on the arm on the side of a
mastectomy;
9. regarding the information that pressurization of the CUFF can temporarily cause loss of
function of simultaneously used monitoring ME EQUIPMENT on the same limb;
10.regarding the need to check (for example, by observation of the limb concerned) that
operation of the AUTOMATED SPHYGMOMANOMETER does not result in
prolonged impairment of the circulation of the blood of the PATIENT.
29
Guidance and manufacturer’s declaration-electromagnetic emissions
The BP3GT1-6B is intended for use in the electromagnetic environment
specified below.
The customer or the user of the BP3GT1-6B should assure that it is used in
such an environment.
Emission test
Compliance
Electromagnetic
environment-guidance
RF emissions
CISPR 11
Group 1
The BP3GT1-6B uses RF energy only for
its internal function. Therefore, its RF
emissions are very low and are not likely
to cause any interference in nearby
electronic equipment.
RF emissions
CISPR 11
Class B
Harmonic
emissions
IEC 61000-3-2
Class A
Voltage
fluctuations
/flicker emissions
IEC 61000-3-3
Compliance
The BP3GT1-6B is suitable for use in all
establishments, including domestic
establishments and those directly
connected to the public low-voltage
power supply network that supplies
buildings used for domestic purposes.
Guidance and manufacturer’s declaration-electromagnetic immunity
The BP3GT1-6B is intended for use in the electromagnetic environment specified below.
The customer or the user of the BP3GT1-6B should assure that it is used in such an environment.
Immunity test
IEC 60601
Compliance level
test level
Electromagnetic
environment-guidance
Electrostatic
+ 6 kV contact
+ 6 kV contact
Floors should be wood, concrete
discharge(ESD) IEC
+ 8 kV air
+ 8 kV air
or ceramic tile. If floors are
61000-4-2
covered with synthetic material,
the relative humidity should be
at least 30%
Electrical fast
+ 2kV for power
+ 2kV for power
Mains power quality should be
transient/burst IEC
supply lines
supply lines
that of a typical commercial or
61000-4-4
+ 1kV for input/output
Not applicable
hospital environment.
+ 1kV line(s) to line(s)
+ 1kV differential
Mains power quality should be
+ 2kV line(s) to earth
mode
that of a typical commercial or
Not applicable
hospital environment.
lines
Surge IEC 61000-4-5
Voltage Dips, short
<5% UT(>95% dip in
<5% UT(>95% dip in
Mains power quality should be
interruptions and voltage
UT) for 0,5 cycle
UT) for 0,5 cycle
that of a typical commercial or
variations on power supply
40% UT(60% dip in
40% UT(60% dip in
hospital environment. If the user
input lines IEC 61000-4-11
UT) for 5 cycles
UT) for 5 cycles
of the BP3GT1-6B
70% UT(30% dip in
70% UT(30% dip in
requires continued operation
UT) for 25 cycles
UT) for 25 cycles
during power mains
<5% UT(>95% dip in
<5% UT(>95% dip in
interruptions, it is recommended
UT) for 5 s
UT) for 5 s
that the BP3GT1-6B be powered
from an uninterruptible power
supply or a battery.
Power frequency(50, 60
3 A/m
3 A/m
The BP3GT1-6B
power
Hz) magnetic field IEC
frequency magnetic fields
61000-4-8
should be at levels characteristic
of a typical location in a typical
commercial or hospital
environment.
NOTE
UT is the a.c. mains voltage prior to application of the test level.
Guidance and manufacturer’s declaration-electromagnetic immunity
The BP3GT1-6B is intended for use in the electromagnetic environment specified below.
The customer or the user of the BP3GT1-6B should assure that is used in such and environment.
Immunity test
IEC 60601 test level
Compliance level
Electromagnetic environment-guidance
Portable and mobile RF communications
equipment should be used no closer to any part
of the BP3GT1-6B including cables, than the
recommended separation distance calculated
from the equation applicable to the frequency of
the transmitter.
Recommended separation distance:
Conducted RF
3 Vrms
IEC 61000-4-6
150 KHz to 80 MHz
Radiated RF
3 V/m
IEC 61000-4-3
80MHz to 2,5 GHz
3 Vrms
3 V/m
d = 1,2 √P
d = 1,2 √P
80MHz to 800 MHz
d = 2,3 √P
800MHz to 2,5 GHz
Where P is the maximum output power rating of
the transmitter in watts (W) according to the
transmitter manufacturer and d is the
recommended separation distance in metres
(m).
Field strengths from fixed RF transmitters, as
determined by an electromagnetic site survey,
should be less than the compliance level in
each frequency range.
Interference may occur in the vicinity of
equipment marked with the following symbol:
NOTE1
At 80 MHz and 800 MHz, the higher frequency range applies.
NOTE2
These guidelines may not apply in all situations. Electromagnetic propagation is affected by absorption and
reflection from structures, objects and people.
Field strengths from fixed transmitters, such as base stations for radio (cellular/cordless) telephones and land mobile
radios, amateur radio, AM and FM radio broadcast and TV broadcast cannot be predicted theoretically with accuracy. To
assess the electromagnetic environment due to fixed RF transmitters, an electromagnetic site survey should be
considered. If the measured field strength in the location in which the BP3GT1-6B is used exceeds the applicable RF
compliance level above, the BP3GT1-6B should be observed to verify normal operation. If abnormal performance is
observed, additional measures may be necessary, such as re-orienting or relocating the BP3GT1-6B.
Over the frequency range 150 kHz to 80 MHz, field strengths should be less than 3 V/m.
Recommended separation distance between
portable and mobile RF communications equipment and the BP3GT1-6B
The BP3GT1-6B is intended for use in an electromagnetic environment in which radiated RF disturbances are
controlled. The customer or the user of the BP3GT1-6B can help prevent electromagnetic interference by
maintaining a minimum distance between portable and mobile RF communications equipment (transmitters) and the
BP3GT1-6B as recommended below, according to the maximum output power of the communications equipment.
Rated maximum output
Separation distance according to frequency of transmitter
power of transmitter
150 kHz to 80 MHz
80 MHz to 800 MHz
800 MHz to 2,5 GHz
d =1,2√P
d =1,2√P
d =2,3√P
0,01
0,12
0,12
0,23
0,1
0,38
0,38
0,73
1,2
1,2
2,3
10
3,8
3,8
7,3
100
12
12
23
For transmitters rated at a maximum output power not listed above, the recommended separation distance d in
metres (m) can be estimated using the equation applicable to the frequency of the transmitter, where p is the
maximum output power rating of the transmitter in watts (W) according to the transmitter manufacturer.
NOTE1
At 80 MHz and 800 MHz, the separation distance for the higher frequency range applies.
NOTE2 These guidelines may not apply in all situations. Electromagnetic propagation is affected by absorption
and reflection from structures, objects and people.

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.6
Linearized                      : No
Author                          : ida.chen
Create Date                     : 2017:01:20 17:37:17+08:00
Modify Date                     : 2017:02:22 15:57:21+08:00
XMP Toolkit                     : Adobe XMP Core 5.3-c011 66.145661, 2012/02/06-14:56:27
Creator Tool                    : PScript5.dll Version 5.2.2
Metadata Date                   : 2017:02:22 15:57:21+08:00
Thumbnail Width                 : 184
Thumbnail Height                : 256
Thumbnail Format                : JPEG
Thumbnail Image                 : (Binary data 9545 bytes, use -b option to extract)
Producer                        : Acrobat Distiller 9.0.0 (Windows)
Trapped                         : False
Format                          : application/pdf
Title                           : Microsoft Word - GT1-6B Master IB
Creator                         : ida.chen
Document ID                     : uuid:34763542-9c3c-41a3-aecb-01dd00fe364d
Instance ID                     : uuid:8baf1cdb-9f41-1f44-83b5-d6e6293b2b37
Rendition Class                 : proof:pdf
Version ID                      : 1
N Pages                         : 1
Has Visible Transparency        : False
Has Visible Overprint           : False
Max Page Size W                 : 209.980292
Max Page Size H                 : 297.038889
Max Page Size Unit              : Millimeters
Font Name                       : Calibri, AdobeSongStd-Light
Font Family                     : Calibri, Adobe 宋体 Std
Font Face                       : Regular, L
Font Type                       : Open Type, Open Type
Font Version                    : Version 5.62, Version 5.016;PS 5.002;hotconv 1.0.67;makeotf.lib2.5.33168
Font Composite                  : False, False
Font File Name                  : Calibri.ttf, AdobeSongStd-Light.otf
Plate Names                     : Black
Swatch Groups Group Name        : Default Swatch Group
Swatch Groups Group Type        : 0
GTS PDFX Version                : PDF/X-4
Page Count                      : 33

EXIF Metadata provided by EXIF.tools