Microprogram Information MT160-T30TAG An Easy Versatile T&A; Terminal User Manual

Microprogram Information Co., Ltd. An Easy Versatile T&A; Terminal

User Manual

Copyright 2010 Microprogram Information Co., Ltd. All rights reserved. Microprogram is a registered trademark of Microprogram Information Co., Ltd.An Easy Versatile T&ATerminalQuick ReferenceGuideVersion 1.2
Copyright 2010 Microprogram Information Co., Ltd. All rights reserved. Microprogram is a registered trademark of Microprogram Information Co., Ltd.Regulatory Compliance StatementsTaiwan NC Warning Statement㠠㓁ἵ⊆䍮曢㳉弢⯫『曢㩆䮈䏭徍㲼:䬓⌨ṳ㢄 䵺❲⻶婴嬰⏯㠣Ḳἵ⊆䍮⯫栢曢㩆Ə杅䵺娘⏖˚⅓⏟˚┭噆ㇽὦ䔏俬✮ᷴ⽾㒬凑孱㛛栢䍮Ə⊇⤎⊆䍮ㇽ孱㛛⎆娔姯Ḳ䉠『⎱⊆僤˛䬓⌨⛂㢄 ἵ⊆䍮⯫栢曢㩆Ḳὦ䔏ᷴ⽾⽘柦棂刑⭰⅏⎱⹙㓥⏯㲼态Ὲ:䵺䙣䏥㛰⹙㓥䏥屈㘩Əㆰ䪲⍚⁃䔏Əḍ㔠╫凚䄈⹙㓥㘩㖠⽾乣乳ὦ䔏˛∴柬⏯㲼态ῈƏ㋮ᾄ曢Ὲ奶⮁ὃ㥔Ḳ䄈䷁曢Ὲ˛ἵ⊆䍮⯫栢曢㩆柯⾴⎾⏯㲼态Ὲㇽⷌ㥔˚䦸⭟⎱憒䘩䔏曢㳉弢⯫『曢㩆娔₀Ḳ⹙㓥FCC Warning StatementThis equipment has been tested and found to comply with the limits for a class B digital device, pursuant to part 15 of the FCC rules. These limits are designed to provide to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the installation. , May cause harmful interference to radio communication. However, there is no guarantee that interferenceWill not occur in a particular installation. if this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
Copyright 2010 Microprogram Information Co., Ltd. All rights reserved. Microprogram is a registered trademark of Microprogram Information Co., Ltd.-Reorient or relocate the receiving antenna-Increase the separation between the equipment and receiver-Connect the equipment into an outlet on a circuit different from that to which the receiver is connected-Consult the dealer or an experienced radio / TV technician for helpB. FCC Port 15.21 information for user You are cautioned that changes or modifications not expressly approved by the party responsible for compliance could void your authority to operate the equipment. b-1 fcc part 15.19This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions(1) This device may not cause harmful interference and This device must accept any interference received, including interference that may cause undesired operation
Copyright 2010 Microprogram Information Co., Ltd. All rights reserved. Microprogram is a registered trademark of Microprogram Information Co., Ltd.English-丨檻Ḕ㕮A Tour of MT160-T30TAG (MT160-T30TAG⯵妤)After opening the box, ensure the following items are present:㈺敲⋬壄䚹Ḳ⽳Ə媲㪉㟌䚹Ḕ㘖␍㛰ᷲ灮䉐⒨ƝMT160-T30TAG Main SubjectMT160-T30TAG᳹榒MT160-T30TAG Back PadMT160-T30TAG侊㘽MT160-T30TAGAccessoriesMT160-T30TAG怋ᶴPlease contact a Microprogram representative if anythingis missing or appears damaged.⥩㞃㛰ỢἼ䉐⒨恡⤘ㇽ㮧㏴Ə媲灬䵈Microprogram Ị塏˛
Copyright 2010 Microprogram Information Co., Ltd. All rights reserved. Microprogram is a registered trademark of Microprogram Information Co., Ltd. English-丨檻Ḕ㕮 Front Panel ⇵朊㜧 LCD Screen LCD 垉⸼ Numeric Keypad 㕟⬾㋰捜 Function Keys ⊆僤捜 LED Indicators LED ㋮䤡䆯
Copyright 2010 Microprogram Information Co., Ltd. All rights reserved. Microprogram is a registered trademark of Microprogram Information Co., Ltd. English-䷩橼ᷕ㔯 Back Panel ⼴朊㜧 JP2 Relay2 孍⠘♏ NO NCNC NOJP3 Relay1 曢䢨捽 Anti-Thief Switch 昙㊭晋⁜㸓敲旃 CN3 ㍹䷁㎌⏊
Copyright 2010 Microprogram Information Co., Ltd. All rights reserved. Microprogram is a registered trademark of Microprogram Information Co., Ltd. Using the Terminal Block ὦ䔏䫖⬷ 䲭 Vcc 12V 湹 GND 湫 485 D+ 䲭䘥 Relay1 - 㨁䘥 Relay1 + 䰱 CAN L 䀘 CAN H 啵 485 D- 㨁 DI 1 湹 GND 㡽 DI 2 湹 GND 䳓 DI 3 湹 GND 䵈 Relay2 - 䘥 Relay2 + CN3

Navigation menu