Microprogram Information MT160-T30TAG An Easy Versatile T&A; Terminal User Manual
Microprogram Information Co., Ltd. An Easy Versatile T&A; Terminal
User Manual
Copyright 2010 Microprogram Information Co., Ltd. All rights reserved. Microprogram is a registered trademark of Microprogram Information Co., Ltd.
An Easy Versatile T&A
Terminal
Quick Reference
Guide
Version 1.2
Copyright 2010 Microprogram Information Co., Ltd. All rights reserved. Microprogram is a registered trademark of Microprogram Information Co., Ltd.
Regulatory Compliance Statements
Taiwan NC Warning Statement
㠠㓁ἵ⊆䍮曢㳉弢⯫『曢㩆䮈䏭徍㲼:
䬓⌨ṳ㢄 䵺❲婴嬰⏯㠣Ḳἵ⊆䍮⯫栢曢㩆Ə杅䵺娘
⏖˚⅓⏟˚┭噆ㇽὦ䔏俬✮ᷴ⽾㒬凑孱㛛栢䍮Ə⊇⤎⊆䍮
ㇽ孱㛛⎆娔姯Ḳ䉠『⎱⊆僤˛
䬓⌨⛂㢄 ἵ⊆䍮⯫栢曢㩆Ḳὦ䔏ᷴ⽾⽘柦棂刑⭰⅏⎱⹙
㓥⏯㲼态Ὲ:䵺䙣䏥㛰⹙㓥䏥屈㘩Əㆰ䪲⍚⁃䔏Əḍ㔠╫
凚䄈⹙㓥㘩㖠⽾乣乳ὦ䔏˛
∴柬⏯㲼态ῈƏ㋮ᾄ曢Ὲ奶⮁ὃ㥔Ḳ䄈䷁曢Ὲ˛ἵ⊆䍮⯫
栢曢㩆柯⾴⎾⏯㲼态Ὲㇽⷌ㥔˚䦸⭟⎱憒䘩䔏曢㳉弢⯫『
曢㩆娔₀Ḳ⹙㓥
FCC Warning Statement
This equipment has been tested and found to comply with the
limits for a class B digital device, pursuant to part 15 of the FCC
rules. These limits are designed to provide to provide
reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and can
radiate radio frequency energy and, if not installed and used in
accordance with the installation. , May cause harmful
interference to radio communication. However, there is no
guarantee that interference
Will not occur in a particular installation. if this equipment does
cause harmful interference to radio or television reception,
which can be determined by turning the equipment off and on,
the user is encouraged to try to correct the interference by one
or more of the following measures:
Copyright 2010 Microprogram Information Co., Ltd. All rights reserved. Microprogram is a registered trademark of Microprogram Information Co., Ltd.
-Reorient or relocate the receiving antenna
-Increase the separation between the equipment and
receiver
-Connect the equipment into an outlet on a circuit different
from that to which the receiver is connected
-Consult the dealer or an experienced radio / TV technician
for help
B. FCC Port 15.21 information for user
You are cautioned that changes or modifications not expressly
approved by the party responsible for compliance could void
your authority to operate the equipment.
b-1 fcc part 15.19
This device complies with part 15 of the FCC rules. Operation is
subject to the following two conditions
(1) This device may not cause harmful interference and
This device must accept any interference received, including
interference that may cause undesired operation
Copyright 2010 Microprogram Information Co., Ltd. All rights reserved. Microprogram is a registered trademark of Microprogram Information Co., Ltd.
English-丨檻Ḕ㕮
A Tour of MT160-T30TAG
(MT160-T30TAG⯵妤)
After opening the box, ensure the following items are present:
㈺敲⋬壄䚹Ḳ⽳Ə媲㪉㟌䚹Ḕ㘖␍㛰ᷲ灮䉐⒨Ɲ
MT160-T30TAG Main Subject
MT160-T30TAG᳹榒
MT160-T30TAG Back Pad
MT160-T30TAG侊㘽
MT160-T30TAGAccessories
MT160-T30TAG怋ᶴ
Please contact a Microprogram representative if anything
is missing or appears damaged.
⥩㞃㛰ỢἼ䉐⒨恡⤘ㇽ㮧㏴Ə媲灬䵈Microprogram Ị塏˛
Copyright 2010 Microprogram Information Co., Ltd. All rights reserved. Microprogram is a registered trademark of Microprogram Information Co., Ltd.
English-丨檻Ḕ㕮
Front Panel
⇵朊㜧
LCD Screen
LCD 垉⸼
Numeric Keypad
㕟⬾㋰捜
Function Keys
⊆僤捜
LED Indicators
LED ㋮䤡䆯
Copyright 2010 Microprogram Information Co., Ltd. All rights reserved. Microprogram is a registered trademark of Microprogram Information Co., Ltd.
English-䷩橼ᷕ㔯
Back Panel
⼴朊㜧
JP2 Relay2
孍⠘♏
NO NC
NC NO
JP3 Relay1
曢䢨捽
Anti-Thief Switch
昙㊭晋⁜㸓敲旃
CN3
㍹䷁㎌⏊
Copyright 2010 Microprogram Information Co., Ltd. All rights reserved. Microprogram is a registered trademark of Microprogram Information Co., Ltd.
Using the Terminal Block
ὦ䔏䫖⬷
䲭
Vcc 12V
湹
GND
湫
485 D+
䲭䘥
Relay1 -
㨁䘥
Rela
y
1 +
䰱
CAN L
䀘
CAN H
啵
485 D-
㨁
DI 1
湹
GND
㡽
DI 2
湹
GND
䳓
DI 3
湹
GND
䵈
Relay2 -
䘥
Relay2 +
CN3