QX 870 Industrial Raster Scanner User's Manual Qx870manual

2009-10-08

• QX-870 Industrial Raster Scanner User’s Manual
  • Table of Contents
  • About the QX-870 Industrial Raster Scanner
  • Scanner Communication
  • Warning and Caution Summary
  • Statement of Agency Compliance
  • Statement of RoHS Compliance
  • 1 Quick Start
    • Step 1 — Check Hardware
    • Step 2 — Connect the System
    • Step 3 — Position Scanner and Symbol
    • Step 4 — Install ESP
    • Step 5 — Select Model
    • Step 6 — Connect
    • Step 7 — Test Read Rate
    • Step 8 — Configure the Scanner
    • Step 9 — Save Changes in ESP
  • 2 Using ESP
    • EZ Mode
    • App Mode
    • Menu Toolbar
    • Navigating in ESP
    • Send/Receive Options
  • 3 Hardware Integration
    • Connectors
    • Cordsets
    • QX-870 and QX-1 Connectors and Pinouts
    • Power and Trigger Switching
    • Port Routing
    • Application Examples
  • 4 Scanner Setup
    • Calibration
    • Configuration Database
    • Ordered Output
    • Output Format
  • 5 Scanner Parameters
    • Communication
    • Read Cycle
    • Symbologies
    • I/O Parameters
    • Matchcode
    • Diagnostics
  • 6 Terminal
    • Terminal Window
    • Find
    • Send
    • Macros
    • Terminal Window Menus
  • 7 Utilities
    • Serial Utility Commands
    • Read Rate
    • Counters
    • Device Control
    • Differences from Default
    • Master Database
    • Digital Bar Code
    • Firmware
    • Default / Reset / Save
    • Scanner Status Requests
    • Other Serial Utility Commands
    • Embedded Menus
  • Appendices
    • Appendix A — General Specifications
    • Appendix B — Electrical Specifications
    • Appendix C — Ground and Shield Considerations
    • Appendix D — Flying Lead Cordset Pinouts
    • Appendix E — Serial Commands
    • Appendix F — Protocol Commands
    • Appendix G — ASCII Table
    • Appendix H — Configuring Ethernet TCP/IP
    • Appendix I — Using EtherNet/IP
    • Appendix J — Operating the Serial Gateway Data Fields in the QX-870 EtherNet/IP (CIP) Interface Object
    • Appendix K — Interface Standards
    • Appendix L — Glossary of Terms