Microsoft BH-112U Bluetooth Headset User Manual

Microsoft Mobile Oy Bluetooth Headset

User Manual.pdf

Nokia Bluetooth Headset BH-112U User GuideIssue 1.2
IntroductionAbout your headsetWith the Nokia Bluetooth BH-112U headset, you can handle calls hands-free, even whenyou are using two mobile devices at the same time.The surface of this product is nickel-free.Warning:This product may contain small parts. Keep them out of the reach of small children.Parts of the product are magnetic. Metallic materials may be attracted to the product.Do not place credit cards or other magnetic storage media near the product, becauseinformation stored on them may be erased.Read this user guide carefully before using the product. Also, read the user guide forthe device that you connect to the product.About Bluetooth connectivityYou can use Bluetooth to make a wireless connection to other compatible devices, suchas mobile devices.Devices do not need to be in direct line-of-sight, but they must be within 10 metres (33feet) of each other. The connection may be affected by obstructions such as walls orother electronic devices.This device is compliant with Bluetooth Specification 2.1 +EDR supporting the followingprofiles: Headset Profile (HSP) 1.1, Handsfree Profile (HFP) 1.5. Check with themanufacturers of other devices to determine their compatibility with this device.2
Get startedKeys and parts1Charger connector2Indicator light3Power key4Microphone5Call key6Earpiece7EarloopStart using your headsetWhen you switch on your headset for the first time, a voice prompt helps you set upyour headset. Voice prompts are not available in all languages.The headset comes with different sized earpads. Select the earpad that fits the best andis the most comfortable for your ear. To change the earpad, pull the current earpad fromthe earpiece, and push the new earpad into place.1 To switch the headset on, press and hold for 2 seconds. If the headset doesn'tswitch on, charge the battery.2 Gently push the earpiece into your ear.3 To pair the headset with a compatible phone, follow the voice prompt.Charge the batteryBefore using the headset, you must charge the battery.31237654
Warning:Use only chargers approved by Nokia for use with this particular model. The use of anyother types may invalidate any approval or warranty, and may be dangerous. Use ofunapproved chargers may present a risk of fire, explosion, or other hazard.2 Connect the charger cable to the charger connector on the headset. The red indicatorlight turns green when the battery is fully charged.3 Disconnect the charger from the headset, then from the wall outlet.When you unplug a charger, hold and pull the plug, not the cord.The fully charged battery has power for up to 5 hours of talk time or up to 150 hours ofstandby time.When the battery charge is low, you hear a voice prompt, the headset beeps every 5minutes, and the red indicator light flashes. When the battery is charging, the redindicator light is on.Check the battery chargeMake sure the headset is switched on, and press . A green light indicates a sufficientcharge level. If the light is yellow, you may need to recharge the battery soon. If thelight is red, recharge the battery.Switch the headset on or offSwitch onPress and hold for 2 seconds. The headset beeps, and a green indicator light flashesonce.The headset connects to the last connected device. If you have never paired the headsetwith a device, or you have cleared the device pairings, pairing mode is activated.Switch offPress and hold for 2 seconds. The headset beeps, and a red indicator light flashesonce. All active calls are ended.If not connected to a device within 30 minutes, the headset switches off.Pair and connect the headset to your phoneBefore using the headset, you must pair and connect it to a compatible phone.41Connect the USB cable to the USB connector of the charger. Connect the charger to a wall outlet.
1 To switch the headset off, press and hold for 2 seconds.2 Switch on the phone to pair with.3 If you have never paired the headset with a phone, or you have cleared the phonepairings, switch the headset on.If you have previously paired your headset with another phone, press and hold for 5 seconds.Pairing mode is activated, and a green indicator light starts to flash quickly. Followthe voice prompt.4 Within 3 minutes, activate Bluetooth on the phone, and set it to search for Bluetoothdevices. For details, see the user guide of the phone.5 Select the headset from the list of found devices.6 If required, enter the passcode 0000.You can pair your headset with 8 compatible phones, but you can only connect it to amaximum of 2 phones at the same time.With some phones, you may need to make the connection separately after pairing.Wear the headsetIf you want to use the headset with the earloop, attach the earloop to the headset. Todetach the earloop, gently pull it from the headset.Slide the earloop behind your ear, and gently push the earpiece against your ear.Carefully bend the earloop around your ear for the best fit. Point the headset towardsyour mouth.5
Make callsMake and receive callsTo make and receive calls using your headset, you need to connect it to your phone.Make a callMake a call in the normal way.Answer a callPress .End a callPress .Reject a callPress twice.Switch a call between your headset and phonePress and hold for 2 seconds.You can redial the last called number or use voice dialling, if your phone supports thesefeatures with the headset.Redial the last called numberWhen no call is in progress, press twice.Use voice diallingWhen no call is in progress, press and hold for 2 seconds, and follow the instructionsin the user guide of your phone.6
Change the volumeSet the desired volume level on your connected mobile device. The selected volume levelis saved as the minimum volume level for the device that is currently connected to theheadset.Pair and connect the headset to two phonesWhen you use the headset for the first time, it automatically connects to your phone.You can also connect your headset to another phone, and manage calls from, forexample, both your personal and your work phone at the same time.1 Make sure Bluetooth is activated on both phones.2 To switch the headset off, press and hold for 2 seconds.3 To activate pairing mode, press and hold for 5 seconds, and pair the headsetwith the second phone.4 Switch the headset off and back on. The headset connects to both phones.To use your headset with just one phone again, activate pairing mode, and press andhold and for 5 seconds.Handle calls from two phonesIf your headset is connected to two phones, you can handle calls from both at the sametime.End an ongoing call, and answer a call on another phonePress .Put an ongoing call on hold, and answer a call on another phonePress and hold for 2 seconds.Switch between active and held callsPress and hold for 2 seconds.End an ongoing call, and activate a held callPress .If you redial or use voice dialling, the call is made on the phone you last had an activecall on with the headset.SettingsClear device pairings1 To switch the headset off, press and hold for 2 seconds.7
2Press and hold and for 9 seconds. The headset beeps twice, and the red andgreen indicator lights alternate.3 When the headset switches on, follow the voice prompt. Pairing mode is activated.Deactivate voice prompts1 To switch the headset off, press and hold for 2 seconds.2 Press and hold for 5 seconds. Pairing mode is activated, and a blue indicatorlight starts to flash quickly.3 Press and hold for 5 seconds. You hear a voice prompt, and a yellow indicatorlight flashes once.Activate voice prompts1 To switch the headset off, press and hold for 5 seconds.2 Press and hold for 5 seconds. Pairing mode is activated, and a blue indicatorlight starts to flash quickly.3 Press and hold for 2 seconds. You hear a voice prompt, and a green indicatorlight flashes once.Troubleshooting•Cannot connect the headset to a compatible device? Make sure the headset ischarged, switched on, and paired with the device.•Did the headset stop functioning even though it is charged? Plug the charger intoa wall outlet, and while you press and hold the power key, connect the headset tothe charger.Product and safety informationBattery and charger informationThis device has an internal, nonremovable, rechargeable battery. Do not attempt to remove the battery from the device as youmay damage the device.Charge your device with any Nokia micro-USB charger. Charger plug type may vary. The plug variant is identified by one of the following: E, X, AR, U, A, C, K, or B.The battery can be charged and discharged hundreds of times, but it will eventually wear out.Talk and standby times are estimates only. Actual times are affected by, for example, device settings, features being used,battery condition, and temperature.If the battery has not been used for a long time, to begin charging, you may need to connect the charger, then disconnect andreconnect it.If the battery is completely discharged, it may take several minutes before the charging indicator is displayed.8
When your charger is not in use, unplug it from the electrical plug and the device. Do not leave a fully charged battery connectedto a charger, as overcharging may shorten the battery’s lifetime. If left unused, a fully charged battery will lose its charge overtime.Always keep the battery between 15°C and 25°C (59°F and 77°F). Extreme temperatures reduce the capacity and lifetime of thebattery. A device with a hot or cold battery may not work temporarily.Do not dispose of batteries in a fire as they may explode. Dispose of batteries according to local regulations. Recycle whenpossible. Do not dispose as household waste.Use the charger for its intended purpose only. Improper use or use of unapproved chargers may present a risk of fire, explosion,or other hazard, and may invalidate any approval or warranty. If you believe the charger is damaged, take it to a service centrefor inspection before continuing to use it. Never use a damaged charger. Only use the charger indoors.Take care of your deviceHandle your device, charger and accessories with care. The following suggestions help you protect your warranty coverage.•Keep the device dry. Precipitation, humidity, and all types of liquids or moisture can contain minerals that corrodeelectronic circuits. If your device gets wet, allow the device to dry.•Do not store the device in cold temperatures.•Do not attempt to open the device.•Unauthorised modifications may damage the device and violate regulations governing radio devices.•Do not drop, knock, or shake the device.•Only use a soft, clean, dry cloth to clean the surface of the device.RecycleAlways return your used electronic products, batteries, and packaging materials to dedicated collection points. This way youhelp prevent uncontrolled waste disposal and promote the recycling of materials.Crossed-out wheeled-bin symbolThe crossed-out wheeled-bin symbol on your product, battery, literature, or packaging reminds you that all electrical andelectronic products, batteries, and accumulators must be taken to separate collection at the end of their working life. Thisrequirement applies in the European Union. Do not dispose of these products as unsorted municipal waste. For moreenvironmental information, see the product Eco profile atwww.nokia.com/ecoprofile.Copyright and other noticesDECLARATION OF CONFORMITYHereby, NOKIA CORPORATION declares that this BH-112U product is in compliance with the essential requirements and otherrelevant provisions of Directive 1999/5/EC. A copy of the Declaration of Conformity can be found at http://www.nokia.com/global/declaration/declaration-of-conformity/.© 2011-2013 Nokia. All rights reserved.9
Nokia, Nokia Connecting People, and the Nokia Original Accessories logo are trademarks or registered trademarks of NokiaCorporation. Nokia tune is a sound mark of Nokia Corporation. Other product and company names mentioned herein may betrademarks or tradenames of their respective owners.The Bluetooth word mark and logos are owned by the Bluetooth SIG, Inc. and any use of such marks by Nokia is under license.The availability of products may vary by region. For more information, contact your Nokia dealer. This device may containco mmodit ie s, tec hn olo gy or so ft ware sub je ct t o export la ws a nd regulations from the US and other countries. Diversion contraryto law is prohibited./Issue 1.2 EN10FCC/INDUSTRY CANADA NOTICEThis device complies with Part 15 of the FCC Rules and Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions: 1. This device may not cause harmful interference; and 2. This device must accept any interference received, including interference that may cause undesired operation. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. NOTE: FCC Radiation Exposure Statement: This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. NOTE: Changes or modifications not expressly approved by Nokia could void the user's authority to operate the equipment.NOTICE FCC / INDUSTRY CANADA Cet appareil est conforme à la partie 15 de la réglementation FCC et aux normes RSS exemptes de licence d'Industry Canada. Toute opération est sujette aux deux conditions suivantes: 1. Cet appareil ne doit pas provoquer d'interférence nuisible et 2. Cet appareil doit accepter toute interférence reçue, y compris les interférences pouvant provoquer un fonctionnement inattendu. Le présent équipement a été testé et révélé conforme aux limites fixées pour un périphérique numérique de classeB, conformément à la partie15 de la réglementation FCC. Ces limites sont destinées à apporter une protection raisonnable contre les interférences nuisibles dans une installation résidentielle. Cet équipement génère, utilise et peut émettre une énergie de fréquence radio, et en cas d'installation ou d'utilisation non conforme aux instructions, provoquer des interférences nuisibles aux communications radio. Toutefois, il n'est nullement garanti que des interférences ne se produiront pas dans une installation particulière. Si cet équipement provoque des interférences nuisibles à la réception radio ou télévision, pouvant être déterminées par la mise sous tension et hors tension de l'équipement, l'utilisateur est encouragé à tenter de corriger les interférences par l'une ou plusieurs des mesures suivantes: réorienter ou déplacer l'antenne de réception; augmenter l'espace séparant l'équipement et le récepteur; raccorder l'équipement à une prise située sur un circuit différent de celui auquel le récepteur est raccordé; consulter le distributeur ou un réparateur radio/TV compétent pour obtenir de l'assistance. REMARQUE: Déclaration d'exposition aux radiations FCC: Cet équipement satisfait aux limites d'exposition aux radiations FCC définies pour un environnement non-contrôlé. Ce transmetteur ne doit pas être situé à côté ou fonctionner en même temps que toute autre antenne ou transmetteur. REMARQUE: Les changements ou modifications non expressément approuvés par Nokia peuvent annuler le droit d'usage de l'utilisateur sur l'équipement.

Navigation menu