Microsoft BH-310 Bluetooth headset User Manual

Microsoft Mobile Oy Bluetooth headset

User Manual

Nokia BluetoothMono HeadsetBH-3105555555/1CyanCyanMagentaMagentaYellowYellowBlackBlack
CyanCyanMagentaMagentaYellowYellowBlackBlack
IntroductionAbout your headsetWith the Nokia Bluetooth Mono Headset BH–310, you can handle calls hands-free, evenwhen using two phones at the same time.The surface of this product is nickel-free.Read this user guide carefully before using theproduct. Also, read the user guide for the devicethat you connect to the product.For more info, go to www.nokia.com/support.About Bluetooth connectivityYou can use Bluetooth to make a wirelessconnection to other compatible devices, suchas mobile phones.Devices do not need to be in direct line-of-sight, but they must be within 10 metres (33feet) of each other. The connection may beaffected by obstructions such as walls orother electronic devices.This device is compliant with BluetoothSpecification 3.0 + EDR supporting the followingprofiles: headset profile (1.1) , handsfree profile(1.5). Check with the manufacturers of otherdevices to determine their compatibility withthis device.ENGLISHCyanCyanMagentaMagentaYellowYellowBlackBlack
Get startedKeys and parts1 Charger connector2 Multifunction key 3 NFC area4 Earloop5 Earpiece6 Carrying clip7 Microphone8 Car holder9 Charger connector10 Indicator lightCharge the batteryWarning: Use only chargers approved byNokia for use with this particular model. The useof any other types may invalidate any approvalor warranty, and may be dangerous. Use ofunapproved chargers may present a risk of fire,explosion, or other hazard.1. Plug the charger into a wall outlet.2. Plug the charger to the charger connectoron the headset or on the car holder. Thered indicator light turns green when thebattery is fully charged.3. Unplug the charger from the headset or carholder, then from the wall outlet.ENGLISHCyanCyanMagentaMagentaYellowYellowBlackBlack
When you unplug a charger, hold and pull theplug, not the cord.The fully charged battery has power for up to5 hours of talk time and up to 114 hours ofstandby time. If you keep the headset in theclip, the standby time is up to 90 days.When the battery charge is low, the redindicator light flashes, and you hear a voiceprompt every 5 minutes. If you've switchedvoice prompts off, the headset beeps every 5minutes.Check the battery charge — When theheadset is switched on and you're not in acall, press . A green light means there isenough power. If the light is yellow, you mayneed to recharge the battery soon. If the lightis red, recharge the battery.Switch the headset on or offSwitch on — Remove the headset from theclip or from the car holder. The headsetbeeps, and a green indicator light flashesonce.If you've never paired the headset with aphone, or you've cleared the pairings, pairingmode is switched on. Pair and connect theheadset with your phone within 3 minutes.If you've paired the headset before, itconnects to the last phone it was used with.If the headset can't find that phone, it triesthe next phone on its list of paired devices. IfENGLISHCyanCyanMagentaMagentaYellowYellowBlackBlack
not connected to a phone within 30 minutes,the headset switches off.Switch off — Put the headset in the clip. Theheadset beeps, and a red indicator lightflashes once. All calls are ended.Tip: Don't have the clip with you? Toswitch the headset off, press and hold for 5 seconds. To switch theheadset on, press .Wear the headsetSlide the earloop behind your ear, then gentlypush the earpiece against your ear. Point theheadset towards your mouth.Change the earpad1. The headset comes with different-sizedearpads. Select the earpad that fits thebest, and is the most comfortable for yourear.2. To change the earpad, pull the currentearpad from the earpiece, and push thenew earpad into place.The headset is set up to be used on your rightear.Use the headset on your left ear — Removeand attach the earloop so that it is to the leftof .When you're not using your headset, keep itin the clip, or car holder.ENGLISHCyanCyanMagentaMagentaYellowYellowBlackBlack
Tip: Have your headset always athand – clip it to your pocket as youwould a pen.Use the car holder1. Make sure the surface of the car dashboardis dry and clean.2. Remove the protective film from thebottom of the car holder.3. Firmly press the car holder into place.Tip: You can also charge your headsetthrough the car holder. Use acompatible charger that uses the carcigarette lighter socket, and connectit to the holder.Pair the devicePair and connect the headset to yourphoneBefore using the headset, you must pair andconnect it to a compatible phone.You can pair your headset with 8 phones, butyou can only connect it to a maximum of 2phones at the same time.With some phones, you may need to makethe connection separately after pairing.When the headset is connected to a phone,the Bluetooth indicator light flashes slowly.ENGLISHCyanCyanMagentaMagentaYellowYellowBlackBlack
Pair and connect the headset usingNFCIf the compatible phone supports NFC, switchits NFC feature on, then switch the headseton, and touch the NFC area of the headsetwith the NFC area of your phone. The headsetconnects to the phone automatically.You can also disconnect the headset usingNFC. For details on NFC, see the user guide ofthe phone.If the phone does not support NFC, pair theheadset manually.Pair the headset manually1. Make sure your headset is switched off andyour compatible phone is on.2. If you've never paired the headset with adevice, or you've cleared the pairings,switch the headset on.If you've previously paired your headsetwith another device, press and hold for5 seconds.Pairing mode is switched on, and a blueindicator light starts to flash quickly.3. Within 3 minutes, switch Bluetooth on inyour phone, then set it to search forBluetooth devices. For details, see the userguide of the phone.4. On your phone, select the headset from thelist of found devices.ENGLISHCyanCyanMagentaMagentaYellowYellowBlackBlack
5. If asked, type in the passcode 0000.In some devices, you may need to make theconnection separately after pairing.Pair and connect the headset to twodevices1. Make sure Bluetooth is switche d o n i n bothphones.2. To switch the headset off, press and hold for 5 seconds.3. Press and hold for 5 seconds to switchpairing mode on, then pair the headsetwith the second phone.4. Switch the headset off and back on. Theheadset connects to both phones.Make callsMake and receive callsTo make and receive calls using your headset,you need to connect it to your phone.Make a call — Make a call in the normal way.Answer a call — Remove the headset fromthe clip.Tip: If the headset is not in the clip,press .End a call — Put the headset in the clip.Tip: To end a call, you can also press.ENGLISHCyanCyanMagentaMagentaYellowYellowBlackBlack
Decline a call — Press twice.Switch a call between your headset andphone — Press and hold for 2 seconds.When you're not in a call, you can redial thelast called number or use voice dialling, ifyour phone supports these features with theheadset.Redial the last called number — Press twice.Use voice dialling — Press and hold for2 seconds, then follow the instructions in theuser guide of your phone.Handle calls from two phonesContinue an ongoing call, and decline acall on another phone — Press twice.End an ongoing call, and answer a call onanother phone — Press .Put an ongoing call on hold, and answer acall on another phone — Press and hold for 2 seconds.Switch between active and held calls — Press and hold for 2 seconds.End an ongoing call, and go back to a heldcall — Press .If you redial or use voice dialling, the call ismade on the phone you last used for a callwith the headset.ENGLISHCyanCyanMagentaMagentaYellowYellowBlackBlack
Product and safetyinformationDriving safetyObey all local laws. Always keep your hands freeto operate the vehicle while driving. Your firstconsideration while driving should be roadsafety. Only use the car holder if it is safe to doso under all driving conditions.When you install the car holder in a car, makesure it does not interfere with or hinder thesteering or braking systems or other systemsused in the operation of the vehicle (for example,airbags) or disturb your field of vision whiledriving.Check that the deployment of the airbag is notblocked or impaired in any way. Make sure thatthe car holder is not installed where you mightcome in contact with it in the event of an accidentor collision.Battery and charger informationThis device has an internal, nonremovable,rechargeable battery. Do not attempt to removethe battery from the device as you may damagethe device.This device is intended for use when suppliedwith power from the following chargers: DC-6.The exact charger model number may varydepending on the type of plug. The plug variantis identified by one of the following: E, X, AR, U,A, C, K, or B.ENGLISHCyanCyanMagentaMagentaYellowYellowBlackBlack
The battery can be charged and dischargedhundreds of times, but it will eventually wearout.Talk and standby times are estimates only. Actualtimes are affected by, for example, devicesettings, features being used, battery condition,and temperature.If the battery has not been used for a long time,to begin charging, you may need to connect thecharger, then disconnect and reconnect it.If the battery is completely discharged, it maytake several minutes before the chargingindicator is displayed.When your charger is not in use, unplug it fromthe electrical plug and the device. Do not leave afully charged battery connected to a charger, asovercharging may shorten the battery’s lifetime.If left unused, a fully charged battery will lose itscharge over time.Always keep the battery between 15°C and 25°C(59°F and 77°F). Extreme temperatures reducethe capacity and lifetime of the battery. A devicewith a hot or cold battery may not worktemporarily.Do not dispose of batteries in a fire as they mayexplode. Dispose of batteries according to localregulations. Recycle when possible. Do notdispose as household waste.Use the charger for its intended purpose only.Improper use or use of unapproved chargers maypresent a risk of fire, explosion, or other hazard,and may invalidate any approval or warranty. Ifyou believe the charger is damaged, take it to aENGLISHCyanCyanMagentaMagentaYellowYellowBlackBlack
service centre for inspection before continuingto use it. Never use a damaged charger. Only usethe charger indoors.Take care of your deviceHandle your device, charger and accessories withcare. The following suggestions help you protectyour warranty coverage.•Keep the device dry. Precipitation,humidity, and all types of liquids ormoisture can contain minerals that corrodeelectronic circuits. If your device gets wet,allow the device to dry.•Do not use or store the device in dusty ordirty areas. Moving parts and electroniccomponents can be damaged.•Do not store the device in hightemperatures. High temperatures canshorten the life of the device, damage thebattery, and warp or melt plastics.•Do not store the device in coldtemperatures. When the device warms toits normal temperature, moisture can forminside the device and damage electroniccircuits.•Do not attempt to open the device.•Unauthorised modifications may damagethe device and violate regulationsgoverning radio devices.•Do not drop, knock, or shake the device.Rough handling can break internal circuitboards and mechanics.ENGLISHCyanCyanMagentaMagentaYellowYellowBlackBlack
•Only use a soft, clean, dry cloth to clean thesurface of the device.•Do not paint the device. Paint can clogmoving parts and prevent properoperation.RecycleAlways return your used electronic products,batteries, and packaging materials to dedicatedcollection points. This way you help preventuncontrolled waste disposal and promote therecycling of materials. Check how to recycle yourNokia products at www.nokia.com/recycling.Copyright and othernoticesDECLARATION OF CONFORMITYHereby, NOKIA CORPORATION declares that thisBH-310 product is in compliance with theessential requirements and other relevantprovisions of Directive 1999/5/EC. A copy of theDeclaration of Conformity can be found atwww.nokia.com/phones/declaration_of_conformity/.© 2011 Nokia. All rights reserved.Nokia, Nokia Connecting People and NokiaOriginal Accessories logo are trademarks orregistered trademarks of Nokia Corporation.ENGLISHCyanCyanMagentaMagentaYellowYellowBlackBlack
Reproduction, transfer, distribution, or storageof part or all of the contents in this document inany form without the prior written permission ofNokia is prohibited. Nokia operates a policy ofcontinuous development. Nokia reserves theright to make changes and improvements to anyof the products described in this documentwithout prior notice.The Bluetooth word mark and logos are ownedby the Bluetooth SIG, Inc. and any use of suchmarks by Nokia is under license.The contents of this document are provided "asis". Except as required by applicable law, nowarranties of any kind, either express or implied,including, but not limited to, the impliedwarranties of merchantability and fitness for aparticular purpose, are made in relation to theaccuracy, reliability or contents of this document.Nokia reserves the right to revise this documentor withdraw it at any time without prior notice.To the maximum extent permitted by applicablelaw, under no circumstances shall Nokia or anyof its licensors be responsible for any loss of dataor income or any special, incidental,consequential or indirect damages howsoevercaused.The availability of particular products may varyby region. Please check with your Nokia dealerfor details. This device may containcommodities, technology or software subject toexport laws and regulations from the US andother countries. Diversion contrary to law isprohibited.ENGLISHCyanCyanMagentaMagentaYellowYellowBlackBlack
FCC/INDUSTRY CANADA NOTICEThis device complies with Part 15 of the FCC Rulesand Industry Canada licence-exempt RSSstandard(s). Operation is subject to the followingtwo conditions: 1. This device may not causeharmful interference; and 2. This device mustaccept any interference received, includinginterference that may cause undesiredoperation. This equipment has been tested andfound to comply with the limits for a Class Bdigital device, pursuant to Part 15 of the FCCRules. These limits are designed to providereasonable protection against harmfulinterference in a residential installation. Thisequipment generates, uses and can radiate radiofrequency energy and, if not installed and usedin accordance with the instructions, may causeharmful interference to radio communications.However, there is no guarantee that interferencewill not occur in a particular installation. If thisequipment does cause harmful interference toradio or television reception, which can bedetermined by turning the equipment off and on,the user is encouraged to try to correct theinterference by one or more of the followingmeasures: Reorient or relocate the receivingantenna. Increase the separation between theequipment and receiver. Connect the equipmentinto an outlet on a circuit different from that towhich the receiver is connected. Consult thedealer or an experienced radio/TV technician forhelp. NOTE: FCC Radiation Exposure Statement:This equipment complies with FCC radiationexposure limits set forth for an uncontrolledenvironment. This transmitter must not be co-ENGLISHCyanCyanMagentaMagentaYellowYellowBlackBlack
located or operating in conjunction with anyother antenna or transmitter. NOTE: Changes ormodifications not expressly approved by Nokiacould void the user's authority to operate theequipment.ENGLISHCyanCyanMagentaMagentaYellowYellowBlackBlack

Navigation menu