Microsoft BH-310 Bluetooth headset User Manual

Microsoft Mobile Oy Bluetooth headset

UserManual.wiki >

Microsoft >

BH 310 User Manual HTML Version

User Manual

Nokia Bluetooth

Mono Headset

BH-310

5555555/1

Cyan

Magenta

Yellow

Black

Cyan

Magenta

Yellow

Black

Introduction

About your headset

With the Nokia Bluetooth Mono Headset BH–

310, you can handle calls hands-free, even

when using two phones at the same time.

The surface of this product is nickel-free.

Read this user guide carefully before using the

product. Also, read the user guide for the device

that you connect to the product.

For more info, go to www.nokia.com/

support.

About Bluetooth connectivity

You can use Bluetooth to make a wireless

connection to other compatible devices, such

as mobile phones.

Devices do not need to be in direct line-of-

sight, but they must be within 10 metres (33

feet) of each other. The connection may be

affected by obstructions such as walls or

other electronic devices.

This device is compliant with Bluetooth

Specification 3.0 + EDR supporting the following

profiles: headset profile (1.1) , handsfree profile

(1.5). Check with the manufacturers of other

devices to determine their compatibility with

this device.

ENGLISH

Cyan

Magenta

Yellow

Black

Get started

Keys and parts

1 Charger connector

2 Multifunction key

3 NFC area

4 Earloop

5 Earpiece

6 Carrying clip

7 Microphone

8 Car holder

9 Charger connector

10 Indicator light

Charge the battery

Warning: Use only chargers approved by

Nokia for use with this particular model. The use

of any other types may invalidate any approval

or warranty, and may be dangerous. Use of

unapproved chargers may present a risk of fire,

explosion, or other hazard.

1. Plug the charger into a wall outlet.

2. Plug the charger to the charger connector

on the headset or on the car holder. The

red indicator light turns green when the

battery is fully charged.

3. Unplug the charger from the headset or car

holder, then from the wall outlet.

ENGLISH

Cyan

Magenta

Yellow

Black

When you unplug a charger, hold and pull the

plug, not the cord.

The fully charged battery has power for up to

5 hours of talk time and up to 114 hours of

standby time. If you keep the headset in the

clip, the standby time is up to 90 days.

When the battery charge is low, the red

indicator light flashes, and you hear a voice

prompt every 5 minutes. If you've switched

voice prompts off, the headset beeps every 5

minutes.

Check the battery charge — When the

headset is switched on and you're not in a

call, press . A green light means there is

enough power. If the light is yellow, you may

need to recharge the battery soon. If the light

is red, recharge the battery.

Switch the headset on or off

Switch on — Remove the headset from the

clip or from the car holder. The headset

beeps, and a green indicator light flashes

once.

If you've never paired the headset with a

phone, or you've cleared the pairings, pairing

mode is switched on. Pair and connect the

headset with your phone within 3 minutes.

If you've paired the headset before, it

connects to the last phone it was used with.

If the headset can't find that phone, it tries

the next phone on its list of paired devices. If

ENGLISH

Cyan

Magenta

Yellow

Black

not connected to a phone within 30 minutes,

the headset switches off.

Switch off — Put the headset in the clip. The

headset beeps, and a red indicator light

flashes once. All calls are ended.

Tip: Don't have the clip with you? To

switch the headset off, press and hold

for 5 seconds. To switch the

headset on, press .

Wear the headset

Slide the earloop behind your ear, then gently

push the earpiece against your ear. Point the

headset towards your mouth.

Change the earpad

1. The headset comes with different-sized

earpads. Select the earpad that fits the

best, and is the most comfortable for your

ear.

2. To change the earpad, pull the current

earpad from the earpiece, and push the

new earpad into place.

The headset is set up to be used on your right

ear.

Use the headset on your left ear — Remove

and attach the earloop so that it is to the left

of .

When you're not using your headset, keep it

in the clip, or car holder.

ENGLISH

Cyan

Magenta

Yellow

Black

Tip: Have your headset always at

hand – clip it to your pocket as you

would a pen.

Use the car holder

1. Make sure the surface of the car dashboard

is dry and clean.

2. Remove the protective film from the

bottom of the car holder.

3. Firmly press the car holder into place.

Tip: You can also charge your headset

through the car holder. Use a

compatible charger that uses the car

cigarette lighter socket, and connect

it to the holder.

Pair the device

Pair and connect the headset to your

phone

Before using the headset, you must pair and

connect it to a compatible phone.

You can pair your headset with 8 phones, but

you can only connect it to a maximum of 2

phones at the same time.

With some phones, you may need to make

the connection separately after pairing.

When the headset is connected to a phone,

the Bluetooth indicator light flashes slowly.

ENGLISH

Cyan

Magenta

Yellow

Black

Pair and connect the headset using

NFC

If the compatible phone supports NFC, switch

its NFC feature on, then switch the headset

on, and touch the NFC area of the headset

with the NFC area of your phone. The headset

connects to the phone automatically.

You can also disconnect the headset using

NFC. For details on NFC, see the user guide of

the phone.

If the phone does not support NFC, pair the

headset manually.

Pair the headset manually

1. Make sure your headset is switched off and

your compatible phone is on.

2. If you've never paired the headset with a

device, or you've cleared the pairings,

switch the headset on.

If you've previously paired your headset

with another device, press and hold for

5 seconds.

Pairing mode is switched on, and a blue

indicator light starts to flash quickly.

3. Within 3 minutes, switch Bluetooth on in

your phone, then set it to search for

Bluetooth devices. For details, see the user

guide of the phone.

4. On your phone, select the headset from the

list of found devices.

ENGLISH

Cyan

Magenta

Yellow

Black

5. If asked, type in the passcode 0000.

In some devices, you may need to make the

connection separately after pairing.

Pair and connect the headset to two

devices

1. Make sure Bluetooth is switche d o n i n both

phones.

2. To switch the headset off, press and hold

for 5 seconds.

3. Press and hold for 5 seconds to switch

pairing mode on, then pair the headset

with the second phone.

4. Switch the headset off and back on. The

headset connects to both phones.

Make calls

Make and receive calls

To make and receive calls using your headset,

you need to connect it to your phone.

Make a call — Make a call in the normal way.

Answer a call — Remove the headset from

the clip.

Tip: If the headset is not in the clip,

press .

End a call — Put the headset in the clip.

Tip: To end a call, you can also press

ENGLISH

Cyan

Magenta

Yellow

Black

Decline a call — Press twice.

Switch a call between your headset and

phone — Press and hold for 2 seconds.

When you're not in a call, you can redial the

last called number or use voice dialling, if

your phone supports these features with the

headset.

Redial the last called number — Press

twice.

Use voice dialling — Press and hold for

2 seconds, then follow the instructions in the

user guide of your phone.

Handle calls from two phones

Continue an ongoing call, and decline a

call on another phone — Press twice.

End an ongoing call, and answer a call on

another phone — Press .

Put an ongoing call on hold, and answer a

call on another phone — Press and hold

for 2 seconds.

Switch between active and held calls —

Press and hold for 2 seconds.

End an ongoing call, and go back to a held

call — Press .

If you redial or use voice dialling, the call is

made on the phone you last used for a call

with the headset.

ENGLISH

Cyan

Magenta

Yellow

Black

Product and safety

information

Driving safety

Obey all local laws. Always keep your hands free

to operate the vehicle while driving. Your first

consideration while driving should be road

safety. Only use the car holder if it is safe to do

so under all driving conditions.

When you install the car holder in a car, make

sure it does not interfere with or hinder the

steering or braking systems or other systems

used in the operation of the vehicle (for example,

airbags) or disturb your field of vision while

driving.

Check that the deployment of the airbag is not

blocked or impaired in any way. Make sure that

the car holder is not installed where you might

come in contact with it in the event of an accident

or collision.

Battery and charger information

This device has an internal, nonremovable,

rechargeable battery. Do not attempt to remove

the battery from the device as you may damage

the device.

This device is intended for use when supplied

with power from the following chargers: DC-6.

The exact charger model number may vary

depending on the type of plug. The plug variant

is identified by one of the following: E, X, AR, U,

A, C, K, or B.

ENGLISH

Cyan

Magenta

Yellow

Black

The battery can be charged and discharged

hundreds of times, but it will eventually wear

out.

Talk and standby times are estimates only. Actual

times are affected by, for example, device

settings, features being used, battery condition,

and temperature.

If the battery has not been used for a long time,

to begin charging, you may need to connect the

charger, then disconnect and reconnect it.

If the battery is completely discharged, it may

take several minutes before the charging

indicator is displayed.

When your charger is not in use, unplug it from

the electrical plug and the device. Do not leave a

fully charged battery connected to a charger, as

overcharging may shorten the battery’s lifetime.

If left unused, a fully charged battery will lose its

charge over time.

Always keep the battery between 15°C and 25°C

(59°F and 77°F). Extreme temperatures reduce

the capacity and lifetime of the battery. A device

with a hot or cold battery may not work

temporarily.

Do not dispose of batteries in a fire as they may

explode. Dispose of batteries according to local

regulations. Recycle when possible. Do not

dispose as household waste.

Use the charger for its intended purpose only.

Improper use or use of unapproved chargers may

present a risk of fire, explosion, or other hazard,

and may invalidate any approval or warranty. If

you believe the charger is damaged, take it to a

ENGLISH

Cyan

Magenta

Yellow

Black

service centre for inspection before continuing

to use it. Never use a damaged charger. Only use

the charger indoors.

Take care of your device

Handle your device, charger and accessories with

care. The following suggestions help you protect

your warranty coverage.

•Keep the device dry. Precipitation,

humidity, and all types of liquids or

moisture can contain minerals that corrode

electronic circuits. If your device gets wet,

allow the device to dry.

•Do not use or store the device in dusty or

dirty areas. Moving parts and electronic

components can be damaged.

•Do not store the device in high

temperatures. High temperatures can

shorten the life of the device, damage the

battery, and warp or melt plastics.

•Do not store the device in cold

temperatures. When the device warms to

its normal temperature, moisture can form

inside the device and damage electronic

circuits.

•Do not attempt to open the device.

•Unauthorised modifications may damage

the device and violate regulations

governing radio devices.

•Do not drop, knock, or shake the device.

Rough handling can break internal circuit

boards and mechanics.

ENGLISH

Cyan

Magenta

Yellow

Black

•Only use a soft, clean, dry cloth to clean the

surface of the device.

•Do not paint the device. Paint can clog

moving parts and prevent proper

operation.

Recycle

Always return your used electronic products,

batteries, and packaging materials to dedicated

collection points. This way you help prevent

uncontrolled waste disposal and promote the

recycling of materials. Check how to recycle your

Nokia products at www.nokia.com/recycling.

notices

DECLARATION OF CONFORMITY

Hereby, NOKIA CORPORATION declares that this

BH-310 product is in compliance with the

essential requirements and other relevant

provisions of Directive 1999/5/EC. A copy of the

Declaration of Conformity can be found at

www.nokia.com/phones/

declaration_of_conformity/.

Nokia, Nokia Connecting People and Nokia

Original Accessories logo are trademarks or

registered trademarks of Nokia Corporation.

ENGLISH

Cyan

Magenta

Yellow

Black

Reproduction, transfer, distribution, or storage

of part or all of the contents in this document in

any form without the prior written permission of

Nokia is prohibited. Nokia operates a policy of

continuous development. Nokia reserves the

right to make changes and improvements to any

of the products described in this document

without prior notice.

The Bluetooth word mark and logos are owned

by the Bluetooth SIG, Inc. and any use of such

marks by Nokia is under license.

The contents of this document are provided "as

is". Except as required by applicable law, no

warranties of any kind, either express or implied,

including, but not limited to, the implied

warranties of merchantability and fitness for a

particular purpose, are made in relation to the

accuracy, reliability or contents of this document.

Nokia reserves the right to revise this document

or withdraw it at any time without prior notice.

To the maximum extent permitted by applicable

law, under no circumstances shall Nokia or any

of its licensors be responsible for any loss of data

or income or any special, incidental,

consequential or indirect damages howsoever

caused.

The availability of particular products may vary

by region. Please check with your Nokia dealer

for details. This device may contain

commodities, technology or software subject to

export laws and regulations from the US and

other countries. Diversion contrary to law is

prohibited.

ENGLISH

Cyan

Magenta

Yellow

Black

FCC/INDUSTRY CANADA NOTICE

This device complies with Part 15 of the FCC Rules

and Industry Canada licence-exempt RSS

standard(s). Operation is subject to the following

two conditions: 1. This device may not cause

harmful interference; and 2. This device must

accept any interference received, including

interference that may cause undesired

operation. This equipment has been tested and

found to comply with the limits for a Class B

digital device, pursuant to Part 15 of the FCC

Rules. These limits are designed to provide

reasonable protection against harmful

interference in a residential installation. This

equipment generates, uses and can radiate radio

frequency energy and, if not installed and used

in accordance with the instructions, may cause

harmful interference to radio communications.

However, there is no guarantee that interference

will not occur in a particular installation. If this

equipment does cause harmful interference to

radio or television reception, which can be

determined by turning the equipment off and on,

the user is encouraged to try to correct the

interference by one or more of the following

measures: Reorient or relocate the receiving

antenna. Increase the separation between the

equipment and receiver. Connect the equipment

into an outlet on a circuit different from that to

which the receiver is connected. Consult the

dealer or an experienced radio/TV technician for

help. NOTE: FCC Radiation Exposure Statement:

This equipment complies with FCC radiation

exposure limits set forth for an uncontrolled

environment. This transmitter must not be co-

ENGLISH

Cyan

Magenta

Yellow

Black

located or operating in conjunction with any

other antenna or transmitter. NOTE: Changes or

modifications not expressly approved by Nokia

could void the user's authority to operate the

equipment.

ENGLISH

Cyan

Magenta

Yellow

Black

Microsoft BH-310 Bluetooth headset User Manual

Microsoft Mobile Oy Bluetooth headset

User Manual

Navigation menu

Namespaces

Views

Navigation