Microsoft NPL-2H GSM PCS Cellular Telephone User Manual

Microsoft Mobile Oy GSM PCS Cellular Telephone Users Manual

Users Manual

User’s Guide9354993Issue 1DRAFTnpl-2_en1_1.fm Page 1 Wednesday, August 7, 2002 10:18 AM
The wireless phone described in this guide is approved for use in GSM 900, 1800 and 1900 networks.LEGAL INFORMATIONPart No. 9354993 Issue No. 1Copyright ©2003 Nokia. All rights reserved.Nokia is a registered trademark of Nokia Corporation.Nokia, Nokia Connecting People, Xpress-on, Pop-Port, the Original Accessories logos, Space Impact, Snake II, and Bumper are trademarks of Nokia Corporation and/or its affiliates.Printed in Canada 02/2003US Patent No 5818437 and other pending patents.T9 text input software Copyright ©1999-2002. Tegic Communications, Inc. All rights reserved.Includes RSA BSAFE cryptographic or security protocol software from RSA Security.The information contained in this user guide was written for Nokia 6100 phone.Nokia operates a policy of continuous development. Nokia reserves the right to make changes and improvements to any of the products described in this document without prior notice.UNDER NO CIRCUMSTANCES SHALL NOKIA BE RESPONSIBLE FOR ANY LOSS OF DATA OR INCOME OR ANY SPECIAL, INCIDENTAL, AND CONSEQUENTIAL OR INDIRECT DAMAGES HOWSOEVER CAUSED.THE CONTENTS OF THIS DOCUMENT ARE PROVIDED “AS IS.” EXCEPT AS REQUIRED BY APPLICABLE LAW, NO WARRANTIES OF ANY KIND, EITHER EXPRESS OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE, ARE MADE IN RELATION TO THE ACCURACY AND RELIABILITY OR CONTENTS OF THIS DOCUMENT. NOKIA RESERVES THE RIGHT TO REVISE THIS DOCUMENT OR WITHDRAW IT AT ANY TIME WITHOUT PRIOR NOTICE.EXPORT CONTROLSThis product contains commodities, technology or software exported from the United States in accordance with the Export Administration regulations. Diversion contrary to U.S. law is prohibited.FCC/INDUSTRY CANADA NOTICEYour phone may cause TV or radio interference (for example, when using a telephone in close proximity to receiving equipment). The FCC or Industry Canada can require you to stop using your telephone if such interference cannot be eliminated. If you require assistance, contact your local service facility. This device complies with part 15 of the FCC rules. Operation is subject to the condition that this device does not cause harmful interference.FCC_Layout.fm Page 91 Monday, February 10, 2003 5:16 PM
Contents3ContentsFOR YOUR SAFETY................... 5General information 7Stickers in the sales package............. 7Access codes........................................... 7Overview of the functions in the phone........................................ 9Multimedia messaging service (MMS)......................................... 9Polyphonic sound (MIDI)..................... 9General Packet Radio Service (GPRS) 9Loudspeaker.......................................... 10MIDP JavaTM applications................ 10Nokia OTA settings service............... 10Dynamic memory................................. 111. Your phone......................... 12Keys and connectors........................... 12Standby mode....................................... 13Screen saver....................................... 13Wallpaper........................................... 13Essential indicators in standby mode............................... 14Putting on the wrist strap................. 152. Getting started................... 16Installing the SIM card and the battery.................................... 16Charging the battery.......................... 18Switching the phone on and off..... 18Normal operating position................ 19Keypad lock (Keyguard)..................... 19Changing the front cover.................. 203. Call functions..................... 22Making a call........................................ 22Speed dialling a phone number... 22Making a conference call.............. 23Answering or rejecting an incoming call.................................. 23Call waiting ....................................... 23Options during a call.......................... 24Loudspeaker....................................... 244. Writing text ........................ 25Setting predictive text input on or off............................. 25Using predictive text input............... 25Writing compound words.............. 26Using traditional text input.............. 26Tips for writing text............................ 275. Phone book (Names) .......... 28Selecting the phone book settings. 28Saving names and phone numbers (Add name).......................... 28Saving multiple numbers and text items per name................ 29Searching for a name in the phone book............................... 30Editing a name, number or text item........................................... 30Erasing names and numbers............ 30Copying phone books......................... 30Sending and receiving a business card..................................... 31Speed dials............................................ 32Info numbers......................................... 32Service numbers................................... 32My numbers.......................................... 32Caller groups......................................... 336. Using the menu .................. 34Accessing a menu function.............. 34List of menu functions....................... 357. Menu functions .................. 38Messages (Menu 1)............................. 38Text messages................................... 38Multimedia messages..................... 43Multimedia messages npl-2_en1_1.fm Page 3 Wednesday, August 7, 2002 1:56 PM
Contents4memory full....................................... 46Erasing messages............................. 47Chat..................................................... 47Voice messages................................ 48Info messages................................... 48Message settings............................. 48Service commands.......................... 51Call register (Menu 2)........................ 51Recent calls lists.............................. 51Call counters and call timers....... 52Profiles (Menu 3)................................. 53 Settings (Menu 4).............................. 54Time and date settings................... 54Call settings...................................... 54Phone settings.................................. 56Display settings................................ 58Tone settings..................................... 60Accessory settings........................... 60Security settings.............................. 61Restore factory settings................. 62Alarm clock (Menu 5)........................ 62Gallery (Menu 6)................................. 62Organiser (Menu 7)............................ 64Calendar............................................. 64To-do list............................................ 66Games (Menu 8).................................. 67Launching a game........................... 67Game services................................... 67Memory status for games............. 68Game settings................................... 68Applications (Menu 9)....................... 68Launching an application.............. 68Downloading an application........ 69Memory status for applications.. 71Extras (Menu 10)................................. 71Calculator.......................................... 71Countdown timer ............................ 72Stopwatch ......................................... 72Wallet ................................................. 73Connectivity (Menu 11).................... 75Infrared............................................... 75GPRS.................................................... 76Services (Menu 12)............................. 77Basic steps for accessing and using WAP services................. 78Setting up the phone for a WAP service............................ 78Making a connection to a WAP service.............................. 80Browsing the pages of a WAP service.............................. 81Ending a WAP connection............ 83Appearance settings of WAP browser............................... 83Cookie settings................................. 83Bookmarks......................................... 84Service inbox.................................... 84The cache memory.......................... 85Authority certificates..................... 85Browser security.............................. 86SIM services (Menu 13)..................... 888. PC Connectivity.................. 89PC Suite................................................. 89GPRS and HSCSD............................. 90Using data communication applications.......................................... 909. Battery statements............. 91Charging and Discharging................ 9110.Technical information ...... 9211.Patents .............................. 93CARE AND MAINTENANCE ... 94IMPORTANT SAFETY INFORMATION........................ 95APPENDIX ............................. 100A message from the CTIA.... 100A message from the U.S. Food and Drug Administration..... 103npl-2_en1_1.fm Page 4 Wednesday, August 7, 2002 1:56 PM
FOR YOUR SAFETY5FOR YOUR SAFETYRead these simple guidelines. Breaking the rules may be dangerous or illegal. Further detailed information is given in this manual.Do not switch the phone on when wireless phone use is prohibited or when it may cause interference or danger.ROAD SAFETY COMES FIRSTDon't use a hand-held phone while driving.INTERFERENCEAll wireless phones may get interference, which could affect performance.SWITCH OFF IN HOSPITALSFollow any regulations or rules. Switch the phone off near medical equipment.SWITCH OFF IN AIRCRAFTWireless devices can cause interference in aircraft.SWITCH OFF WHEN REFUELLINGDon't use the phone at a refuelling point. Don't use near fuel or chemicals.SWITCH OFF NEAR BLASTINGDon't use the phone where blasting is in progress. Observe restrictions, and follow any regulations or rules.USE SENSIBLYUse only in the normal position. Don't touch the antenna unnecessarily.QUALIFIED SERVICEOnly qualified personnel may install or repair phone equipment.ACCESSORIES AND BATTERIESUse only approved accessories and batteries. Do not connect incompatible products.CONNECTING TO OTHER DEVICESWhen connecting to any other device, read its user's guide for detailed safety instructions. Do not connect incompatible products.npl-2_en1_1.fm Page 5 Monday, September 2, 2002 2:35 PM
FOR YOUR SAFETY6BACKUP COPIESRemember to make backup copies of all important data.WATER-RESISTANCEYour phone is not water-resistant. Keep it dry.CALLINGEnsure the phone is switched on and in service. Enter the phone number, including the area code, then press . To end a call, press . To answer a call, press .EMERGENCY CALLSEnsure the phone is switched on and in service. Press as many times as needed (e.g. to exit a call, to exit a menu, etc.) to clear the display. Enter the emergency number, then press . Give your location. Do not end the call until told to do so.■Network ServicesThe wireless phone described in this guide is approved for use on the EGSM 900, GSM 1800 and GSM 1900 network.Triband is a network dependent feature. Check with your local service provider if you can subscribe to and use this feature.A number of features included in this guide are called Network Services. These are special services that you arrange through your wireless service provider. Before you can take advantage of any of these Network Services, you must subscribe to them through your service provider and obtain instructions for their use from your service provider.Note: Some networks may not support all language-dependent characters and/or services.■About accessoriesCheck the model number of any charger before use with this device. This device is intended for use when supplied with power from ACP-12 and LCH-12.Warning: Use only batteries, chargers and accessories approved by the phone manufacturer for use with this particular phone model. The use of any other types may invalidate any approval or warranty applying to the phone, and may be dangerous.For availability of approved accessories, please check with your dealer.When you disconnect the power cord of any accessory, grasp and pull the plug, not the cord.npl-2_en1_1.fm Page 6 Monday, September 2, 2002 2:35 PM
General information7General information■Stickers in the sales packageThe stickers contain important information for services and customer support purposes.Attach the sticker to your warranty card.Attach the sticker to the Nokia Club Invitation Card supplied in the sales package.■Access codes•Security code (5 to 10 digits): The security code protects your phone against unauthorised use, and is supplied with the phone. The preset code is 12345. Change the code, and keep the new code secret and in a safe place separate from your phone. To change the code, and to set the phone to request the code, see Security settings on page 61.•PIN code and PIN2 code (4 to 8 digits): The PIN (Personal Identification Number) code protects your SIM card against unauthorised use. The PIN code is usually supplied with the SIM card.Set the phone to request the PIN code each time the phone is switched on, see Security settings on page 61.The PIN2 code may be supplied with the SIM card and is required to access some functions, such as charging unit counters.If you key in an incorrect PIN code several times, the phone may display SIM blocked and ask you to key in the PUK code. Contact your service provider to get the PUK code.•PUK and PUK2 codes (8 digits): The PUK (Personal Unblocking Key) code is required to change a blocked PIN code. The PUK2 code is required to change a blocked PIN2 code. If the codes are not supplied with the SIM card, contact your local service provider for the codes.npl-2_en1_1.fm Page 7 Monday, September 2, 2002 2:35 PM
General information8•Barring password (4 digits): The barring password is needed when using the Call barring service, see Security settings on page 61. You can obtain the password from your service provider.•Signing PIN: The signing PIN is needed for the digital signature. See Digital signature on page 88. The signing PIN is supplied with the SIM card if the SIM card contains a security module.If you key in an incorrect PIN code several times, the phone may display SIM blocked and ask you to key in the PUK code. Contact your service provider to get the PUK code.•Wallet code (4-10 digits): The wallet code is needed to access the wallet services. If you key in a wrong wallet code several times, the wallet application is blocked for five minutes. For further information, see Wallet on page 73.npl-2_en1_1.fm Page 8 Monday, September 2, 2002 2:35 PM
Overview of the functions in the phone9Overview of the functions in the phoneThe Nokia 6100 phone provides many functions which are practical for daily use, such as Calendar, Clock, Alarm clock, Calculator, and many more. Also a range of Nokia Xpress-onTM colour covers is available for your phone. To change the cover, see Changing the front cover on page 20.■Multimedia messaging service (MMS)The phone is able to send multimedia messages made up of text and a picture, and to receive messages containing text, pictures and sounds. You can save the pictures and sounds for personalising your phone. See Multimedia messages on page 43.■Polyphonic sound (MIDI)Polyphonic sound consists of several sound components played at the same time like a real melody through a speaker. Polyphonic sounds are used in ringing tones and message alert tones. Your phone has sound components from over 40 instruments that can be used for polyphonic sounds but the phone can play four instruments simultaneously. The phone supports the Scalable Polyphonic MIDI (SP-MIDI) format.You can receive polyphonic ringing tones via multimedia service, see Reading and replying to a multimedia message on page 45, or download them via the gallery menu, see Gallery (Menu 6) on page 62 or via the PC suite, see PC Suite on page 89.■General Packet Radio Service (GPRS)GPRS technology allows mobile phones to be used for sending and receiving data over the mobile network. GPRS as such is a data bearer that enables wireless access to data networks like the Internet. The applications that use GPRS are WAP services, MMS and SMS messaging, MIDP JavaTM application downloading and the GPRS dial-up (for example, Internet and e-mail).npl-2_en1_1.fm Page 9 Monday, September 2, 2002 2:35 PM
Overview of the functions in the phone10Before you can use GPRS technology• Contact your network operator or service provider for availability and subscription to the GPRS service.• Save the GPRS settings for each of the applications used over GPRS.See Setting up the phone for a WAP service on page 78, Message settings on page 48 and GPRS on page 76.Pricing for GPRS and applicationsBoth the active GPRS connection and the applications used over GPRS are priced. For more detailed information on pricing, contact your network operator or service provider.■LoudspeakerThe loudspeaker allows you to use your phone as a speakerphone, also during a conference call. See Loudspeaker on page 24.■MIDP JavaTM applicationsYour phone supports Java technology and includes some MIDP Java applications and games that have been specially designed for mobile phones. You can download new applications and games to your phone from a PC with a Java installer software or from WAP services, e.g. from Club Nokia. See Applications (Menu 9) on page 68.■Nokia OTA settings serviceIn order to use WAP, MMS, GPRS and other wireless services you need to set proper settings in your phone. You may receive the settings directly as an OTA (Over The Air) message and you only need to save the settings. For more information and availability of the settings, contact your nearest authorised Nokia dealer.npl-2_en1_1.fm Page 10 Monday, September 2, 2002 2:35 PM
Overview of the functions in the phone11■Dynamic memoryYour phone uses dynamic memory for some functions. Dynamic memory means that the phone’s memory is shared between different functions. In addition to the dynamic memory, a minimum amount of memory is reserved for each of the functions. The phone displays a note if there is not enough memory for a function. In the Gallery, Games and Applications menu you can view the size of the downloaded graphic and ringing tone files and the downloaded Java applications. The maximum size of the memory for a function is available if enough dynamic memory is freeThe following functions share the phone’s dynamic memory• Phone book (Names), see page 28.You may save up to 300 names and phone numbers.• Text messages, see page 38.You may save up to 150 text messages or 50 picture or multi-part messages.• Multimedia messages, see page 43.You may save up to 15 messages with the maximum size of 30kB each.• Gallery (Menu 6) for ringing tones and images, see page 62.You may save up to 60 ringing tones with an average size of 5kB of which 20 are removable and up to 35 images with an average size of 10kB.• Calendar, see page 64. You may save up to 250 calendar notes.• To-do list, see page 66. You may save up to 30 notes.• Java applications, see Games (Menu 8) on page 67 and Applications (Menu 9) on page 68. You may save up to six applications and/or games with a maximum size of 64kB each.npl-2_en1_1.fm Page 11 Monday, September 2, 2002 2:35 PM
Your phone121. Your phone■Keys and connectors1. Power key Switches the phone on and off. For example, when the keypad is locked, pressing the power key briefly turns the phone’s display lights on for approximately 15 seconds.2. Volume keysKeys to adjust the earpiece, headset and loudspeaker volume.3. Selection keys and The function of the keys depends on the guiding text shown on the display above the keys, for example, Menu and Names in standby mode.4. 4-way scroll key with , , and Enables scrolling through names, phone numbers, menus or settings and in the calendar. In standby mode, pressing opens the Create message menu and pressing opens the Calendar menu.5. dials a phone number, and answers a call. In standby mode it shows the most recently called number.6. ends an active call. Exits from any function.7. - enter numbers and characters. and are used for various purposes in different functions.npl-2_en1_1.fm Page 12 Monday, September 2, 2002 2:35 PM
Your phone131. Charger connector2. Pop-PortTM connector for headset and data cable, for example3. Infrared (IR) port■Standby modeWhen the phone is ready for use, and you have not keyed in any characters, the phone is in standby mode.1. Indicates in which cellular network the phone is currently being used.2. Shows the signal strength of the cellular network at your current location. The higher the bar, the stronger the signal.3. Shows the battery charge level. The higher the bar, the more power in the battery.4. The left selection key in standby mode is Menu.5. The right selection key in standby mode is Names.See also Essential indicators in standby mode on page 14.Screen saverThe phone automatically activates the screen saver, a digital clock view, for power saving in standby mode. It will be activated after a certain time when no function of the phone is used. See Screen saver on page 59. Press any key to deactivate the screen saver.Note that if you have not set the time, 00:00 is displayed. To set the time, see Clock on page 54.WallpaperYou can set your phone to display a background picture, wallpaper, when the phone is in standby mode. See Wallpaper on page 58.npl-2_en1_1.fm Page 13 Monday, September 2, 2002 2:35 PM
Your phone14Essential indicators in standby modeYou have received one or several text or picture messages. See Reading and replying to a message or an e-mail on page 40.You have received one or several multimedia messages. See Reading and replying to a multimedia message on page 45.You have received one or several voice messages. See Voice messages on page 47.The phone’s keypad is locked. See Keypad lock (Keyguard) on page 19.The phone does not ring at an incoming call or text message when Incoming call alert is set to Off and Message alert tone is set to Off. See Tone settings on page 60.The alarm clock is set to On. See Alarm clock (Menu 5) on page 62.The countdown timer is running. See Countdown timer on page 72.The stopwatch timer is running in the background. See Stopwatch on page 72.A GPRS dial-up connection is established, refer to GPRS modem settings on page 77. The indicator is shown on the top left of the display.There is an incoming or outgoing call or a text message during a GPRS dial-up connection. The GPRS connection is suspended.Infrared connection indicator, see Infrared on page 75.All your calls are diverted to another number, Divert all voice calls. If you have two phone lines, the divert indicator for the first line is and for the second line . See Call divert on page 54. or Indicates the selected phone line, if you have two phone lines. See Line for outgoing calls on page 56.npl-2_en1_1.fm Page 14 Monday, September 2, 2002 2:35 PM
Your phone15The loudspeaker has been activated, see Loudspeaker on page 24.Calls are limited to a closed user group. See Security settings on page 61.The timed profile is selected. See Profiles (Menu 3) on page 53., or Headset, handsfree or loopset accessory is connected to the phone.To set the phone to show the time and date in standby mode, see Clock on page 54 and Date on page 54.■Putting on the wrist strapThread the strap as shown in the picture and then tighten it.npl-2_en1_1.fm Page 15 Monday, September 2, 2002 2:35 PM
Getting started162. Getting started■Installing the SIM card and the batteryKeep all miniature SIM cards out of the reach of small children.• The SIM card and its contacts can easily be damaged by scratches or bending, so be careful when handling, inserting or removing the card.• Before removing the battery switch off the phone.1. To remove the back cover from the phone:With the back of the phone facing you, push the back cover release button (1) and slide the back cover off (2).Remove the battery by lifting it with the finger grip.2. To release the SIM card holder, gently pull the locking of the card holder (4) and open it (5).npl-2_en1_1.fm Page 16 Monday, September 2, 2002 2:35 PM
Getting started173. Insert the SIM card into the SIM card holder (6). Make sure that the SIM card is properly inserted and that the golden contact area on the card is faced like shown.4. Close the SIM card holder (7) and press it as it locks.5. Insert the battery (8).6. Slide the back cover into its place (9).npl-2_en1_1.fm Page 17 Monday, September 2, 2002 2:35 PM
Getting started18■Charging the battery1. Connect the lead from the charger to the socket on the bottom of your phone.2. Connect the charger to an AC wall socket.The text Charging is displayed briefly if the phone is switched on. If the battery is completely empty, it may take a few minutes before the charging indicator appears on the display or any calls can be made.You can use the phone while the charger is connected.The charging time depends on the charger and the battery used. For example, charging a BL-4C battery with the ACP-12 charger takes up to one hour and 30 minutes in standby mode.■Switching the phone on and offPress and hold the power key .Note that if the phone displays Insert SIM card even though the SIM card is properly inserted, or SIM card not supported, contact your network operator or service provider. Your phone does not support 5 Volt SIM cards and the card may need to be changed.• If the phone asks for a PIN code, key in the PIN code (displayed as ****), and press OK.See also PIN code request in Security settings on page 61 and Access codes on page 7.• If the phone asks for a security code, key in the security code (displayed as *****), and press OK.See also Access codes on page 7.Warning: Do not switch the phone on when wireless phone use is prohibited or when it may cause interference or danger.npl-2_en1_1.fm Page 18 Monday, September 2, 2002 2:35 PM
Getting started19■Normal operating positionUse the phone only in its normal operating position.Your phone has a built-in antenna. As with any other radio transmitting device, do not touch the antenna unnecessarily when the phone is switched on. Contact with the antenna affects call quality and may cause the phone to operate at a higher power level than otherwise needed.Not touching the antenna area during a phone call optimises the antenna performance and the talktime of your phone.■Keypad lock (Keyguard)You can lock the keypad to prevent the keys being accidentally pressed, for example, when your phone is in your handbag.•Locking the keypadIn standby mode, press Menu and then within 1.5 seconds.•Unlocking the keypadPress Unlock and then within 1.5 seconds.To answer a call when the keypad is locked, press . During a call, the phone can be operated normally. When you end or reject the call, the keypad will automatically be locked again.For automatic keypad lock, see Automatic keyguard on page 56.For locking the keypad during a call, see Options during a call on page 24.Note: When the keypad is locked, calls may be possible to the emergency number programmed into your phone (e.g. 112, 911 or other official emergency number). Key in the emergency number and press . The number is displayed only after you have keyed in its last digit.npl-2_en1_1.fm Page 19 Monday, September 2, 2002 2:35 PM
Getting started20■Changing the front coverBefore changing the front cover, always switch off the power and disconnect the phone from the charger or any other device. Always store and use the phone with the covers attached.1. Remove the back cover of the phone. See step 1 in Installing the SIM card and the battery on page 16.2. To remove the front cover, gently disperse the back part of the phone and the front cover beginning at the bottom of the phone.3. Insert the key mat on the new front cover.npl-2_en1_1.fm Page 20 Monday, September 2, 2002 2:35 PM
Getting started214. To attach the front cover, first place the back part of the phone and the front cover properly together and then gently push on the bottom and the top of the phone until the catches are locked properly.5. Slide the back cover into its place. See step 6 in Installing the SIM card and the battery on page 16.npl-2_en1_1.fm Page 21 Monday, September 2, 2002 2:36 PM
Call functions223. Call functions■Making a call1. Key in the phone number, including the area code. If you key in a wrong character, press Clear to delete it.For international calls, press twice for the international prefix (the + character replaces the international access code) and then key in the country code, area code without the leading 0, if necessary, and the phone number.2. Press to call the number.3. Press to end the call or to cancel the call attempt.See also Options during a call on page 24.Making a call using the phone book• See Searching for a name in the phone book on page 30. Press to call the number on the display.Last number redialling• In standby mode, press once to access the list of the 20 numbers you last called or attempted to call. Scroll to the number or name you want, and press to call the number.Calling your voice mailbox• In standby mode, press and hold , or press and .If the phone asks for the voice mailbox number, key it in and press OK. See also Voice messages on page 47.Speed dialling a phone numberAssign a phone number to one of the speed dialling keys, from to , see Speed dials on page 32. Call the number in either of the following ways:• Press the speed dialling key you want and then press .•If Speed dialling is set to on, press and hold a speed dialling key until the call is started. See Speed dialling on page 55.npl-2_en1_1.fm Page 22 Monday, September 2, 2002 2:36 PM
Call functions23Making a conference callConference calling is a network service that allows up to six persons to take part in a conference call.1. Make a call to the first participant.2. To make a call to a new participant, press Options and select New call.3. Key in, or retrieve from the phone book, the phone number of the new participant and press Call. The first call is put on hold.4. When the new call has been answered, join the first participant in the conference call. Press Options and select Conference.5. To add a new participant to the call, repeat steps 2 to 4.6. To have a private conversation with one of the participants:Press Options and select Private and select the desired participant. Rejoin the conference call as described in step 4.7. To end the conference call, press .■Answering or rejecting an incoming callPress to answer the incoming call and press to end the call.Press to reject the incoming call.Press Silence, if available, to mute the ringing tone. Then either answer or reject the call.If the headset HDB-4 is connected to the phone, you can answer and end a call by pressing the headset key.Tip: If the Divert if busy function is activated to divert the calls, for example to your voice mailbox, rejecting an incoming call will also divert the call. See Call divert on page 54.Call waitingDuring a call, press to answer the waiting call. The first call is put on hold. Press to end the active call.To activate the Call waiting function, see Call waiting on page 55.npl-2_en1_1.fm Page 23 Monday, September 2, 2002 2:36 PM
Call functions24■Options during a callMany of the options that you can use during a call, are network services. Press Options during a call for some of the following options:Mute or Unmute, End call, End all calls, Phone book, Menu and Hold or Unhold, New call, Conference, Private, Answer, Reject and Loudspeaker or Handset.Lock keypad to activate the keypad lock.Send DTMF to send DTMF tone strings, for example, passwords or bank account numbers. Key in the DTMF string or search for it in the phone book and press OK. Note that you can key in the wait character w and the pause character p by repeatedly pressing .Swap to switch between the active call and the call on hold, Transfer to connect a call on hold to an active call, and disconnect yourself from the calls.LoudspeakerYou can use your phone as a loudspeaker during a call. Do not hold the phone to your ear during loudspeaker operation.• To activate the loudspeaker, press Options and select Loudspeaker, or press Loudsp., if available.• To deactivate the loudspeaker during a call, press Options and select Handset, or press Handset, if available.If you have connected the handsfree unit CARK126 or the headset to the phone, Handset in the options list is replaced with Handsfree or Headset and the selection key Handset with Handsfr. or Headset, respectively.The loudspeaker is automatically deactivated when you end the call or call attempt or connect the handsfree unit or headset to the phone.npl-2_en1_1.fm Page 24 Monday, September 2, 2002 2:36 PM
Writing text254. Writing textYou can key in text, for example when writing messages, using the traditional or predictive text input.When you are writing text, the predictive text input is indicated by and the traditional text input by at the top left of the display. The character case is indicated by , , or next to the text input indicator. You can change the character case by pressing . The number mode is indicated by , and you can change between the letter and number mode by pressing and holding .■Setting predictive text input on or offWhen writing text, press Options and select Dictionary.• To set the predictive text input on, select a language in the dictionary options list. Predictive text input is only available for the languages on the list.• To change back to the traditional text input, select Dictionary off.Tip: To quickly set the predictive text input on or off when writing text, press twice, or press and hold Options.■Using predictive text inputYou can key in any letter with a single keypress. The predictive text input is based on a built-in dictionary to which you can also add new words.1. Start writing a word by using the keys to . Press each key only once for one letter. The word changes after each keystroke.Example: To write Nokia when the English dictionary is selected, press once for N, once for o, once for k, once for i and once for a:To insert a number while in letter mode, press and hold the desired number key.npl-2_en1_1.fm Page 25 Monday, September 2, 2002 2:36 PM
Writing text26More instructions for writing text, see Tips for writing text on page 27.2. When you have finished writing the word and it is correct, confirm it by adding a space with or by pressing any of the scroll keys. Pressing a scroll key also moves the cursor.If the word is not correct, press repeatedly or press Options and select Matches. When the word you want appears, confirm it.If the ? character is displayed after the word, the word you intended to write is not in the dictionary. To add the word to the dictionary, press Spell, key in the word (traditional text input is used) and press Save. When the dictionary becomes full, the new word replaces the oldest one that was added.3. Start writing the next word.Writing compound wordsKey in the first part of the word and confirm it by pressing . Write the last part of the word and confirm the word.■Using traditional text inputPress a number key, to , repeatedly until the desired character appears. Not all characters available under a number key are printed on the key. The characters available depend on the language selected in the Language menu, see Language on page 56.To insert a number while in letter mode, press and hold the desired number key.• If the next letter you want is located on the same key as the present one, wait until the cursor appears, or press any of the scroll keys and then key in the letter.• The most common punctuation marks and special characters are available under the number key .More instructions for writing text, see Tips for writing text on page 27.npl-2_en1_1.fm Page 26 Monday, September 2, 2002 2:36 PM
Writing text27■Tips for writing textThe following functions may also be available for writing text:• To insert a space, press .• To move the cursor to the left, right, down or up, press the scroll keys , , or , respectively.• To delete a character to the left of the cursor, press Clear. Press and hold Clear to delete the characters more quickly.To delete all the characters at once when writing a message, press Options and selectClear text.• To insert a word when using the predictive text input, press Options and select Insert word. Write the word using the traditional text input and press Save. The word is also added to the dictionary.• To insert a special character when using the traditional text input, press , or when using the predictive text input, press and hold , or press Options and select Insert symbol.Press any of the scroll keys to scroll to a character and press Use to select the character.You can also scroll to a character by pressing , , or , and select the character by pressing .The following options are available when writing text messages:• To insert a number while in letter mode, press Options and select Insert number. Key in the phone number or search it in the phone book and press OK.• To insert a name from the phone book, press Options and select Insert name. To insert a phone number or a text item attached to the name, press Options and select View details.npl-2_en1_1.fm Page 27 Monday, September 2, 2002 2:36 PM
Phone book (Names)285. Phone book (Names)You can save names and phone numbers in the phone’s memory (internal phone book) and in the SIM card’s memory (SIM phone book).• The internal phone book may save up to 300 names with numbers and textual notes for each name. How many names can be saved depends on the length of the names, and the number and length of phone numbers and text items.The internal phone book uses dynamic memory, see Dynamic memory on page 11.• The phone supports SIM cards that can save up to 250 names and phone numbers. Names and numbers saved in the SIM card’s memory, are indicated by .■Selecting the phone book settingsPress Names and select Settings. Select•Memory in use to select the phone book you want to use. To recall names and numbers from both phone books, select Phone and SIM. The names and numbers will be saved in the phone’s memory.•Phone book view to select how the names (and numbers) in the phone book are displayed.•Memory status to see how many names and phone numbers are currently saved and how many can still be saved in the selected phone book.■Saving names and phone numbers (Add name)Names and numbers will be saved in the used memory, see Selecting the phone book settings above.1. Press Names and select Add name.2. Key in the name and press OK. See Using traditional text input on page 26.3. Key in the phone number, and press OK. To key in the numbers, see Making a call on page 22.npl-2_en1_1.fm Page 28 Monday, September 2, 2002 2:36 PM
Phone book (Names)294. When the name and number are saved, press Done.Tip: Quick save In standby mode, key in the phone number. Press Options, and select Save. Key in the name, press OK and Done. Saving multiple numbers and text items per nameYou can save different types of phone numbers and short text items per name in the phone’s internal phone book.The first number saved is automatically set as the default number and it is indicated with a frame around the number type indicator, for example . When you select a name from the phone book, for example to make a call, the default number is used unless you select another number.1. Make sure that the memory in use is either Phone or Phone and SIM. See Selecting the phone book settings on page 28.2. To access the list of names and phone numbers, press or in standby mode.3. Scroll to the name saved in the phone’s internal phone book to which you want to add a new number or text item, and press Details.4. Press Options and select Add number or Add detail.5. Select one of the following number types General, Mobile, Home, Office and Fax,or text types E-mail address, Web address, Postal address and Note.To change the type of a number or text, select Change type in the options list.6. Key in the number or text item and press OK to save it.7. Press Back and then Exit to return to standby mode.Changing the default numberPress or in standby mode, scroll to the name you want and press Details. Scroll to the number you want to set as the default number. Press Options and select Set as default.npl-2_en1_1.fm Page 29 Monday, September 2, 2002 2:36 PM
Phone book (Names)30■Searching for a name in the phone book1. Press Names and select Search.2. You can key in the first characters of the name you are searching for in the pop-up window. Press and to scroll through the names in the list, and and to move the cursor in the pop-up window.3. Scroll to the name you want, and press Details. Scroll to view the details of the selected name.Tip: To quickly find a name and phone number, press or in standby mode. Key in the first letter(s) of the name, and/or scroll to the name you want.■Editing a name, number or text itemSearch for the name (and number) you want to edit and press Details. Scroll to the name, number or text item you want to edit, and press Options. Select Edit name, Edit number, or Edit detail, and edit the name, number, or text and press OK.■Erasing names and numbersPress Names and select Delete.• To delete names and numbers one by one, select One by one and scroll to the name (and number) you want to delete. Press Delete and press OK to confirm.• To delete names and numbers in the phone book all at once, select Delete all and then scroll to the phone book, Phone or SIM card and press Delete. Press OK and confirm with the security code.■Copying phone booksYou can copy names and phone numbers from the phone’s memory to your SIM card’s memory and vice versa.1. Press Names and select Copy.2. Select the copying direction, From phone to SIM card or From SIM card to phone.npl-2_en1_1.fm Page 30 Monday, September 2, 2002 2:36 PM
Phone book (Names)313. Select One by one, All or Default nos..• If you select One by one, scroll to the name you want to copy and press Copy.Default nos. is shown if you copy from the phone to the SIM card. Only the default numbers will be copied.4. To choose whether you want to keep or delete the original names and numbers, select Keep original or Move original.• If you select All or Default nos., press OK when Start copying? or Start moving? is displayed.■Sending and receiving a business cardYou can send and receive a person’s contact information as a business card either via IR or as an OTA message if supported by the network.Receiving a business cardTo receive a business card via IR, make sure that your phone is ready to receive data through its IR port, see Infrared on page 75. The user of the other phone can now send the name and phone number via Infrared.When you have received a business card via IR or as an OTA message, press Show. Press Save to save the business card in the phone’s memory. To discard the business card, press Exit and then OK.Sending a business cardYou can send a business card via IR or as an OTA message to a compatible phone or other handheld device which supports the vCard standard.1. Search for the name and phone number you want to send from the phone book, press Details and Options and select Send bus. card.2. To send the business card via IR, make sure that the other phone or the PC is set up to receive data via its IR port and select Via infrared.To send the business card as an OTA message, select Via text message.npl-2_en1_1.fm Page 31 Monday, September 2, 2002 2:36 PM
Phone book (Names)32■Speed dialsTo make a call by using the speed dialling keys, see Speed dialling a phone number on page 22.Assigning a number to a speed dialling keyPress Names, select Speed dials and scroll to the speed dialling key number you want.Press Assign, press Search, and select first the name and then the number you want to assign. If a number is already assigned to the key, press Options, and you can view, change or delete the assigned number.■Info numbersYou can call the information numbers of your service provider if the numbers are included in your SIM card.Press Names and select Info numbers. Scroll in a category to an information number and press to call the number.■Service numbersYou can call the service numbers of your service provider if the numbers are included in your SIM card.Press Names and select Service numbers. Scroll to a service number and press to call the number.■My numbersThe phone numbers assigned to your SIM card are saved in My numbers if this is allowed by the card. To view the numbers press Names and select My numbers. Scroll to the desired name or number, and press View.npl-2_en1_1.fm Page 32 Monday, September 2, 2002 2:36 PM
Phone book (Names)33■Caller groupsYou can arrange the names and phone numbers saved in the phone book into caller groups. For each caller group, you can set the phone to play a specific ringing tone and show a selected logo on the display when you receive a call from a phone number in the group, see below. To set the phone to ring only upon calls from phone numbers belonging to a selected caller group, see Alert for in Tone settings on page 60.Press Names, and select Caller groups and select the desired caller group. Select•Group name, key in a new name for the caller group and press OK.•Group ringing tone and select the ringing tone for the group. Default is the ringing tone selected for the currently active profile.•Group logo and select On to set the phone to display the group logo, Off not to display it, or View to view the logo.•Group members to add a name to the caller group, press Options and select Add name. Scroll to the name you want to add to the group and press Add.To remove a name from a caller group, scroll to the name you want to remove, and press Options and select Remove name.npl-2_en1_1.fm Page 33 Monday, September 2, 2002 2:36 PM
Using the menu346. Using the menuThe phone offers you an extensive range of functions which are grouped in menus. Most of the menu functions are provided with a brief help text. To view the help text, scroll to the menu function you want and wait for 15 seconds. To exit the help text, press Back. See Help text activation on page 58.■Accessing a menu functionBy scrolling1. To access the menu, press Menu.2. Scroll with or through the menu and select, for example, Settings by pressing Select.3. If the menu contains submenus, select the one you want, for example Call settings.4. If the selected submenu contains further submenus, repeat step 3. Select the next submenu, for example Anykey answer.5. Select the setting of your choice.6. Press Back to return to the previous menu level, and Exit to exit the menu.By shortcutThe menus, submenus and setting options are numbered and you can access them by using their shortcut number. • To access the menu, press Menu. Key in quickly, within two seconds, the index number of the menu function you want to access.Example: To set the Anykey answer On, press Menu, , , and . Press Back to return to the previous menu level, and Exit to exit the menu.npl-2_en1_1.fm Page 34 Monday, September 2, 2002 2:36 PM
Using the menu35■List of menu functions1. Messages1. Text messages1. Create message2. Inbox3. Create e-mail4. Sent items5. Archive6. Templates7. My folders8. Distribution lists9. Delete messages2. Multimedia msgs.1. Create message2. Inbox3. Outbox4. Sent items5. Saved items6. Delete messages3. Chat4. Voice messages1. Listen to voice messages2. Voice mailbox number5. Info messages1. Info service2. Topics3. Language4. Info topics saved on SIM card5. Read6. Message settings1. Text messages2. Multimedia msgs.3. Other settings7. Service commands2. Call register1. Missed calls2. Received calls3. Dialled numbers4. Delete recent call lists1. All2. Missed3. Received4. Dialled5. Call duration1. Last call duration2. Received calls' duration3. Dialled calls' duration4. All calls' duration5. Clear timers6. Call costs1. Last call units2. All calls' units3. Call cost settings7. GPRS data counter1. Data sent in last session2. Data received in last session3. All sent data4. All received data5. Clear counters8. GPRS connection timer1. Duration of last session2. Duration of all sessions3. Clear timers3. Profiles1. General1. Activate2. Personalise3. Timed2. Silent (same submenus as in General)3. Meeting (same submenus as in General)npl-2_en1_1.fm Page 35 Monday, September 2, 2002 2:36 PM
Using the menu364. Outdoor (same submenus as in General)5. Pager (same submenus as in General)4. Settings1. Time and date settings1. Clock2. Date3. Auto-update of date & time2. Call settings1. Call divert2. Anykey answer3. Automatic redial4. Speed dialling5. Call waiting service6. Summary after call7. Send my caller identity8. Line for outgoing calls13. Phone settings1. Language2. Automatic keyguard3. Cell info display4. Welcome note5. Network selection6. Confirm SIM service actions7. Help text activation8. Start-up tone4. Display settings1. Wallpaper2. Colour schemes3. Operator logo4. Screen saver timeout5. Display brightness5. Tone settings1. Incoming call alert2. Ringing tone3. Ringing volume4. Vibrating alert5. Message alert tone6. Keypad tones7. Warning tones8. Alert for6. Accessory settings21. Headset2. Handsfree3. Loopset7. Security settings1. PIN code request2. Call barring service3. Fixed dialling4. Closed user group5. Security level6. Access codes8. Restore factory settings5. Alarm clock6. Gallery1. View folders1. Images2. Tones2. Delete folder3. Rename folder4. Add folder5. Downloads1. For availability, contact your network operator or service provider.2. This menu is shown only if the phone is or has been connected to a headset, handsfree unit or loopset available for the phone.npl-2_en1_1.fm Page 36 Monday, September 2, 2002 2:36 PM
Using the menu377. Organiser1. Calendar2. To-do list8. Games1. Select game2. Game services3. Memory4. Settings1. Game sounds2. Game lights3. Shakes4. Club Nokia ID9. Applications1. Select application2. App. services3. Memory10.Extras1. Calculator2. Countdown timer3. Stopwatch4. Wallet1. Cards2. Personal notes3. Settings11.Connectivity1. Infrared2. GPRS1. GPRS connection2. GPRS modem settings12.Services1. Home2. Bookmarks3. Service inbox4. Settings1. Active service settings2. Edit active service settings3. Appearance settings4. Cookies5. Authority certificates6. Security module settings7. Service inbox settings5. Go to address6. Clear the cache13.SIM services11. Only shown if supported by your SIM card. The name and contents vary depending on the SIM cardnpl-2_en1_1.fm Page 37 Monday, September 2, 2002 2:36 PM
Menu functions387. Menu functions■Messages (Menu 1)You can read, write, send and save text, multimedia, and e-mail messages. All the messages are organised in folders.Before you can send any text, picture, and e-mail messages, you need to save your message centre number, see Message settings on page 48.Text messagesYour phone is able to send and receive multi-part messages made of several ordinary text messages (network service). Invoicing is based upon how many ordinary messages are needed for a multi-part message.You can also send and receive text messages which contain pictures. Each of these picture messages is made up of several text messages. Therefore, sending one picture message may cost more than sending one text message.Note: Picture message function can be used only if it is supported by your network operator or service provider. Only phones that offer picture message features can receive and display picture messages.Writing and sending messagesThe number of available characters and the current part number of a multi-part message are shown at the top right of the display.1. Press Menu, and select Messages, Text messages and Create message.Tip: To quickly open the Create message menu, press in standby mode.2. Key in a message. See Writing text on page 25. To insert text templates or a picture in the message, see Templates on page 41.3. To send the message, press Options and select Send.npl-2_en1_1.fm Page 38 Monday, September 2, 2002 2:36 PM
Menu functions394. Enter the recipient’s phone number or search for the phone number in the phone book.Press OK to send the message.Note: When sending messages via the SMS network service, your phone may display the words Message sent. This is an indication that the message has been sent by your phone to the message centre number programmed into your phone. This is not an indication that the message has been received at the intended destination. For more details about SMS services, check with your service provider.Options for sending a messageAfter you have written a message, press Options and select Sending options.• To send a message to several recipients, select Send to many. When you have sent the message to everyone you want to send it to, press Done.• To send a message to a predefined distribution list, select Send to list.To define and edit distribution lists, see Distribution lists on page 42.• To send a message using a message profile, first select Sending profile and then the desired message profile.To define a message profile, see Message settings on page 48.Writing and sending an e-mailBefore you can send any e-mails via SMS you need to save the settings for e-mail sending, see Message settings on page 48. For availability and subscription to the e-mail service, contact your network operator or service provider. To save an e-mail address in the phone book, see Saving multiple numbers and text items per name on page 29.1. Press Menu, and select Messages, Text messages and Create e-mail.2. Key in the recipient’s e-mail address or search for it in the phone book and press OK.3. You can key in the subject for the e-mail if you want and press OK.4. Key in the e-mail message. See Writing text on page 25. The number of characters you can key in, is shown at the top right of the display. E-mail address and subject are included in the total number of characters.npl-2_en1_1.fm Page 39 Monday, September 2, 2002 2:36 PM
Menu functions40See also Inserting a text template in a message or in an e-mail on page 41. Inserting a picture is not possible.5. To send the e-mail, press Options and selectSend e-mail. If you have not saved the settings for e-mail sending, the phone asks for the e-mail server number.Press OK to send the e-mail.Note: When sending e-mails via the SMS network service, your phone may display the words Message sent. This is an indication that the e-mail has been sent by your phone to the e-mail server. This is not an indication that the e-mail has been received at the intended destination. For more details about e-mail services, check with your service provider.Reading and replying to a message or an e-mailWhen you have received a message or an e-mail, the indicator and the number of new messages followed by messages received is shown.You may be able to receive up to 75 text messages or 25 picture or multi-part messages. Received messages are automatically stored in dynamic memory, see Dynamic memory on page 11.The blinking indicates that the message memory is full. Before you can receive new messages, delete old messages.1. Press Show to view the message, or press Exit to view it later.Reading the message later:Press Menu, and select Messages, Text messages and Inbox.2. If more than one message is received, select the message you want to read. An unread text message is indicated by in front of it and an unviewed picture message by .3. While reading or viewing the message, press Options.You can select, for example, an option to delete, forward or edit the message as a text message or an e-mail, move and rename the message you are reading.Select Copy to calendar to copy text from the beginning of the message to your phone’s calendar as a reminder note for the current day.npl-2_en1_1.fm Page 40 Monday, September 2, 2002 2:36 PM
Menu functions41Select Message details to view the sender’s name and phone number, the message centre used, reception date and time.Select Use detail to extract numbers, e-mail addresses and website addresses from the current message.When reading a picture message, select Save picture to save the picture in the Templates folder.4. Select Reply to reply to a message. Select Original text to include the original message in the reply, or select a standard answer to be included in the reply, or select Empty screen.When replying to an e-mail, first confirm or edit e-mail address and subject. Write your reply message.5. Press Options, select Send, and press OK to send the message to the displayed number.Inbox and outbox foldersThe phone saves the incoming text messages in the Inbox folder and the sent messages in the Sent items folder of the Text messages submenu.The text messages you want to send later, can be saved in the Archive, My folders or Templates folder.TemplatesYour phone offers you text templates, indicated with , and picture templates, indicated with .To access the template list, press Menu, and select Messages, Text messages and Templates.Inserting a text template in a message or in an e-mail• When you are writing or replying to a message, or an e-mail, press Options. Select Use template and select the template you want to insert.Inserting a picture in a text message• When you are writing or replying to a message, press Options. Select Insert picture and select a picture to view it. Press Insert to insert the picture into your message. The indicator on the header of the message indicates that a picture has been attached. The number of npl-2_en1_1.fm Page 41 Monday, September 2, 2002 2:38 PM
Menu functions42characters that you can enter in a message, depends on the size of the picture.To view the text and the picture together before sending the message, press Options and select Preview.Archive folder and my foldersTo organise your messages, you can move some of your messages to the Archive folder, or add new folders for your messages.While reading a message, press Options. Select Move, scroll to the folder where you want to move the message and press OK.To add or delete a folder, press Menu, and select Messages and My folders.• To add a folder, press Options and select Add folder.• To delete a folder, scroll to the folder you want to delete, press Options and select Delete folder.Distribution listsIf you need to send messages more often to a fixed group of recipients, you can define a distribution list containing those recipients and use this list, when sending a message. You can define up to 10 distribution lists containing up to 20 recipients.Note: As recipients in a distribution list, phone book entries that are stored in your phone memory are used. Phone book entries that are stored on your SIM can be copied to your phone memory, see Copying phone books on page 30.To view and edit distribution lists, press Menu, and select Messages, Text messages and Distribution lists.Press Options to get the following options to edit distribution lists:•View list to view the names in the selected distribution list.•Add list to add a new distribution list.•Rename list to rename the selected distribution list.•Clear list to delete all names in the selected distribution list.•Delete list to delete the selected distribution list.npl-2_en1_1.fm Page 42 Monday, September 2, 2002 2:38 PM
Menu functions43To edit the content of a distribution list, you have to be in the list view with the option View list. Press Options to get the following options to edit the content of a distribution list:•Add name to add a name to the distribution list.•View details to view the details of the selected name.•Delete name to delete the selected name in the distribution list.To send a message to the recipients in a distribution list, after writing the message, press Options and select Sending options and Send to list. While sending the message to the recipients, the phone displays the progress with the number of messages left to send. If a message failed to send to one or more recipients, the message is stored in Failed messages, which you can find in the list of Distribution lists. Select Failed messages and press Options to get the following options to handle the failed message:•Resend to list to resend the message to the failed recipients.•View list to view the list of failed recipients.•Delete list to delete the listof failed recipients.•View message to view the failed message.Multimedia messagesNote: This function can be used only if it is supported by your network operator or service provider. Only phones that offer multimedia message features can receive and display multimedia messages.A multimedia message can contain text, picture and sound. The phone supports multimedia messages of size up to 30 KB. If that maximum size is exceeded, the phone may not be able to receive the message. Depending on the network, you may receive a text message including an Internet address where you can view the multimedia message.If the message contains a picture, the phone scales them down to fit the display area.Note: The default setting of the multimedia message service is on (Allow multimedia reception is set Yes), and your operator or service provider may charge you for every message you receive.npl-2_en1_1.fm Page 43 Monday, September 2, 2002 2:38 PM
Menu functions44Multimedia messaging supports the following formats:• Picture: JPEG, GIF, PNG, and BMP.• Sound: Scalable Polyphonic MIDI (SP-MIDI) and monophonic ringing tones.If the received message contains any unsupported elements, they may be replaced with the file name and the text Object format not supportedNote that you are not able to receive any multimedia messages if you have a call in progress, a game or another Java application running, or an active WAP connection over GSM data (see Keying in the service settings manually on page 79). Because delivery of multimedia messages can fail for a variety of reasons, do not rely solely upon them for essential communications.Writing and sending a multimedia messageTo set the settings needed for multimedia messaging, see Settings for the multimedia messages on page 49. For availability and subscription to the multimedia messaging service, contact your network operator or service provider.1. Press Menu, and select Messages, Multimedia msgs. and Create message.2. Key in a message. See Writing text on page 25.You can insert one picture in a multimedia message. To insert a picture, press Options, and select Insert image. The list of available folders in the Gallery is shown. To open the desired folder, select it and then select the desired picture. The indicator on the header of the message indicate that a picture has been attached.To insert a name from the phone book, press Options and select More options and Insert name. Scroll to the desired name, press Options and select Insert name.To insert a number, press Options and select More options and Insert number. Key in the number or search it in the phone book, and press OK.3. To view the message before sending it, press Options and select Preview.npl-2_en1_1.fm Page 44 Monday, September 2, 2002 2:38 PM
Menu functions454. To send the message, press Options and select Send to number (or Send to e-mail).5. Enter the recipient’s phone number (or e-mail address) or search for the phone number (or e-mail address) in the phone book. Press OK and the message is moved to the Outbox folder for sending.Sending a multimedia message takes more time than sending a text message. During sending the animated indicator is displayed and you can use other functions of the phone. If the sending is interrupted, the phone tries to resend it for a few times. If the sending fails, the message remains in the Outbox folder and you can try to resend it.The sent messages will be saved in the Sent items folder if the setting Save sent messages is set to Yes. See Settings for the multimedia messages on page 49.Reading and replying to a multimedia messageWhen your phone is receiving a multimedia message, the animated indicator is displayed. When the message is received, the indicator and the text Multimedia message received is shown.The blinking indicates that the memory for multimedia messages is full, see Multimedia messages memory full on page 46.1. Press Show to view the message, or press Exit to view it later.Reading the message later: Press Menu, and select Messages, Multimedia msgs. and Inbox.2. Scroll to view the message. Press Options and some of the following options may be available.•Delete message to delete a saved message.•Reply to reply to a message. To send the reply message, press Options and select Send. Sender’s phone number (or e-mail address) is used as the default value.•Forward to no. or Forward to e-mail to use a phone number or e-mail address.•Edit to edit a message. You can only edit messages you have written. See Writing and sending a multimedia message on page 44.npl-2_en1_1.fm Page 45 Monday, September 2, 2002 2:38 PM
Menu functions46•Message details to view the message subject, size and class. •Play to listen to the sound in the message.•Save sound clip to save the sound in the Gallery.•Zoom in to zoom the picture in the message bigger.•Save image to save the picture in the Gallery.Inbox, Outbox, Saved and Sent items foldersThe phone saves the received multimedia messages in the Inbox folder of the Multimedia msgs. submenu.Multimedia messages to be sent are moved to the Outbox folder of the Multimedia msgs. submenu.The multimedia messages you want to send later, can be saved in the Saved items folder of the Multimedia msgs. submenu.The sent multimedia messages are saved in the Sent items folder of the Multimedia msgs. submenu.Multimedia messages memory fullYou may be able to receive up to 15 multimedia messages with the maximum size of 30kB each. Received messages are automatically stored in dynamic memory, see Dynamic memory on page 11.When you have a multimedia message waiting and the memory for the messages is full, the indicator is blinking and Multimedia memory full, view waiting msg. is shown. To view the waiting message, press Show. To save the message, press Options, select Save message and delete old messages by first selecting the folder and then an oId message to be deleted.To discard the waiting message, press Exit and Yes. If you press No, you can view the message.Erasing messages1. To delete the text messages, press Menu, and select Messages, Text messages and Delete messages.To delete the multimedia messages, press Menu, and select Messages, Multimedia msgs. and Delete messages.npl-2_en1_1.fm Page 46 Monday, September 2, 2002 2:38 PM
Menu functions472. To delete all the messages in a folder, scroll to the folder and press OK. Then press OK when Delete all read messages from folder? is displayed.To delete all read messages from all the folders, scroll to All read and press OK . Then press OK when Delete read messages from all folders? is displayed.ChatYou can have a conversation with another person using this text messaging application. You cannot save received or sent messages, but you can view them while chatting. Each chat message is priced as a text message.1. To start a chat, press Menu, select Messages and Chat. Key in or search in the phone book the phone number of the person with whom you want to start the chat session and press OK.Another way to start a chat: When you have received a message, press Show to read it. To start a chat, press Options and select Chat.2. Key in your nickname for the chat and press OK.3. Write your chat message, see Writing text on page 25.4. To send the message, press Options and select Send.5. The reply message from the other person is shown above your original message. To reply to the message, press OK and repeat the steps 3 and 4.6. To end the chat session, press OK and select Quit.To view the latest messages of the current chat session, press Options and select Chat history. The messages you sent are indicated by "<" and your nickname and the messages you received by ">", and the sender’s nickname. Press Back to return to the message you are writing. To edit your nickname, select the option Chat name.Voice messagesVoice mailbox is a network service and you may need to subscribe to it first. For more information and for the voice mailbox number, contact your service provider.npl-2_en1_1.fm Page 47 Monday, September 2, 2002 2:38 PM
Menu functions48Press Menu, and select Messages and Voice messages. Select•Listen to voice messages to call your voice mailbox at the phone number you have saved within the Voice mailbox number menu.Each phone line may have its own voice mailbox number, see Line for outgoing calls on page 56.•Voice mailbox number to key in, search for or edit your voice mailbox number and press OK to save it.If supported by the network, the indicator will indicate new voice messages. Press Listen to call your voice mailbox number.Tip: Pressing and holding calls your voice mailbox.Info messagesWith the info message network service you can receive messages on various topics, for example weather or traffic conditions, from your service provider. For available topics and relevant topic numbers, contact your service provider.If the GPRS connection is set to Always online, the info messages may not be received. In that case, set the GPRS connection to When needed, see GPRS connection on page 76.Message settingsThe message settings affect the sending, receiving or viewing of the messages.Settings for text and e-mail messages1. Press Menu, and select Messages, Message settings, Text messages and Sending profile.2. If more than one message profile set is supported by your SIM card, select the set you want to change. • Select Message centre number to save the phone number of the message centre needed for sending text messages. You receive the number from your service provider. • Select Messages sent as to select the message type Text or E-mail, Paging and Fax.npl-2_en1_1.fm Page 48 Monday, September 2, 2002 2:38 PM
Menu functions49•Select Message validity to select the time for how long the network should attempt to deliver your message.• For message type Text, select Default recipient number to save a default number to send messages for this message profile.For message type E-mail, select E-mail server to save the e-mail server number.•Select Delivery reports to request the network to send delivery reports on your messages (network service).•Select Use GPRS to set GPRS as the preferred SMS bearer.•Select Reply via same centre to allow the recipient of your message to send you a reply message via your message centre (network service).•Select Rename sending profile to change the name of the selected message profile. The message profile sets are displayed only if your SIM card supports more than one set.Overwrite settingsWhen the text message memory is full, the phone cannot receive or send any new messages. However, you can set the phone to automatically replace old text messages in the Inbox and Sent items folders with the new ones.Press Menu, and select Messages, Message settings, Text messages and Overwriting in inbox or Overwriting in sent items. Select Allowed to set the phone to replace the old text messages with new ones in the Inbox or the Sent items folder, respectively.Settings for the multimedia messagesPress Menu, and select Messages, Message settings and Multimedia msgs.. Select•Save sent messages. Select Yes to set the phone to save the sent multimedia messages in the Sent items folder. If you select No, the sent messages are not saved.•Allow multimedia reception. Choose No, Yes or In home network to use multimedia service. If you choose In home network, you cannot receive multimedia messages when outside your home network.npl-2_en1_1.fm Page 49 Monday, September 2, 2002 2:38 PM
Menu functions50•Incoming multimedia messages. Select Retrieve to set the phone automatically to fetch received multimedia messages, or select Reject if you do not wish to receive multimedia messages.•Connection settings. Define WAP connection settings for retrieving multimedia messages. Activate the set where you want to save the connection settings and then edit the settings. Refer also Keying in the service settings manually on page 79.•Settings' name. Key in the new name for the connection set and press OK.•Homepage. Key in the homepage address of the WAP service that you want to use, press for a dot, and press OK.•Session mode. Select Permanent or Temporary.•Data bearer. Select GPRS.•GPRS access point. Key in the access point name and press OK. An access point name is needed to establish a connection to a GPRS network. You obtain the access point name from your network operator or service provider.•IP address. Key in the address, press for a dot, and press OK. You obtain the IP address from your network operator or service provider.•Authentication type. Select Secure or Normal.•User name . Key in the user name and press OK.•Password. Key in the password and press OK.•Allow adverts. You can receive or reject adverts.To receive the multimedia connection settings as a text messageYou may receive the service settings as a text message from the network operator or service provider that offers the WAP service that you want to use. For more information, contact your network operator or service provider, or visit Club Nokia’s website (www.club.nokia.com).Font size settingTo select the font size for reading and writing messages, press Menu, and select Messages, Message settings, Other settings and Font size.npl-2_en1_1.fm Page 50 Monday, September 2, 2002 2:38 PM
Menu functions51Service commandsPress Menu, and select Messages and Service commands. Key in and send service requests (also known as USSD commands) such as activation commands for network services, to your service provider.■Call register (Menu 2)The phone registers the phone numbers of missed, received and dialled calls, and the approximate length and cost of your calls.The phone registers missed and received calls only if the network supports these functions, the phone is switched on and within the network’s service area.When you press Options in the Missed calls, Received calls and Dialled numbers menu, you can, for example, view the date and the time of the call, edit or delete the phone number from the list, save the number in the phone book, or send a message to the number.Recent calls listsPress Menu, and select Call register and then select•Missed calls to view the list of the last ten phone numbers from which somebody has tried to call you (network service). The number in the front of the (name or) phone number indicates the amount of call attempts from that caller.Tip: When a note about missed calls is being displayed, press List to access the list of phone numbers. Scroll to the number you would like to call back and press .•Received calls to view the list of the last ten phone numbers from which you have most recently accepted calls (network service).•Dialled numbers to view the list of the 20 phone numbers that you have most recently called or attempted to call. See also Last number redialling on page 22.•Delete recent call lists to delete the recent calls lists. Select whether you want to delete all the phone numbers in the recent call lists, or npl-2_en1_1.fm Page 51 Monday, September 2, 2002 2:38 PM
Menu functions52only those numbers in the missed calls, received calls or dialled numbers lists. You cannot undo the operation.Call counters and call timersNote: The actual invoice for calls and services from your service provider may vary, depending upon network features, rounding-off for billing, taxes and so forth.Press Menu, and select Call register and then select•Call duration, scroll to view the approximate duration of your incoming and outgoing calls in hours, minutes and seconds. To clear the timers, the security code is needed.Each phone line has its own call timers and the timers of the selected line are displayed. See Line for outgoing calls on page 56.•Call costs (network service). Select Last call units or All calls' units to check the cost of your last call or all calls in terms of units specified within the Show costs in function.Select Call cost settings and select Clear counters to clear the counters, or select Show costs in to set the phone to show the remaining talk time in terms of charging units, Units, or units of currency, Currency. Contact your service provider for charging unit prices.Select Call cost limit to limit the cost of your calls to a certain amount of charging units or units of currency. The PIN2 code is needed for the call cost settings.Note: When no more charging units or currency units are left, calls may only be possible to the emergency number programmed into your phone (e.g. 112, 911 or other official emergency number).•GPRS data counter and scroll to check the amounts of sent and received data in last session, data sent and received in total, and to clear the counters. The counters unit is a byte. To clear the counters, the security code is needed.•GPRS connection timer scroll to check the duration of the last GPRS connection or the total GPRS connection. You can also clear the timers. To clear the timers, the security code is needed.npl-2_en1_1.fm Page 52 Monday, September 2, 2002 2:38 PM
Menu functions53■Profiles (Menu 3)Your phone has various setting groups, profiles, for which you can customise the phone tones for different events and environments. At first, personalise the profiles to your liking and then you only need to activate a profile to use it. Available profiles are General, Silent, Meeting, Outdoor, and Pager.Press Menu, and select Profiles. Scroll to a profile and press Select.• To activate the selected profile, select Activate.• To set the profile to be active for a certain amount of time up to 24 hours, select Timed and set the end time. When the time set for the profile expires, the previous profile that was not timed, becomes active.• To personalise the profile, select Personalise. Select the setting you want to change and make the changes.The settings can also be changed in the Tone settings menu, see Tone settings on page 60.In addition you can rename a profile, Profile name. The General profile can not be renamed.Tip: To change the profile quickly in standby mode, press the power key , scroll to the profile you want to activate and press Select.npl-2_en1_1.fm Page 53 Monday, September 2, 2002 2:38 PM
Menu functions54■ Settings (Menu 4)Time and date settingsClockPress Menu, and select Settings, Time and date settings and Clock.Select Show clock to show the clock on the top right of the display in standby mode. Select Set the time, to adjust the clock to the right time, and Time format to select the 12-hour or 24-hour time format.The clock serves the functions Messages, Call register, Alarm clock, timed Profiles , Calendar and screen saver, for example.If the battery is removed from the phone for a long time, you may need to set the time again.DatePress Menu, and select Settings, Time and date settings and Date.Select Show date and the date is shown on the display when the phone is in standby mode. Select Set the date to adjust the date. You can also select the date format.Auto update of date and timePress Menu, and select Settings, Time and date settings and Auto-update of date & time (network service). To set the phone to automatically update the time and date according to the current time zone, select On. To set the phone to ask for a confirmation before the update, select Confirm first.Automatic update of date and time does not change the time you have set for the alarm clock, calendar or the alarm notes. They are in local time. Updating may cause some alarms you have set to expire.Call settingsCall divertPress Menu, and select Settings, Call settings and Call divert (network service). With call divert you can direct your incoming calls to another number, for example, to your voice mailbox number. For details, contact npl-2_en1_1.fm Page 54 Monday, September 2, 2002 2:38 PM
Menu functions55your service provider. Divert options not supported by your SIM card or your network operator may not be shown.Select the divert option you want, for example, select Divert if busy to divert the voice calls when your number is busy or when you reject an incoming call.To set the divert setting to on, select Activate, to set the divert setting to off, select Cancel, or Check status to check whether the divert is activated or not. To change the timeout when the call is diverted, first select Set delay if this is available for the divert option, and then select Activate to set the divert setting to on. Several divert options may be active at the same time.To see the divert indicators in standby mode, see Standby mode on page 13.Anykey answerPress Menu, and select Settings, Call settings and then Anykey answer. Select On and you can answer an incoming call by briefly pressing any key, except , selection keys and , and .Automatic redialPress Menu, and select Settings, Call settings and Automatic redial. Select On and your phone will make a maximum of ten attempts to connect the call after an unsuccessful call attempt.Speed diallingPress Menu, and select Settings, Call settings and Speed dialling. Select On and the names and phone numbers assigned to the speed dialling keys, from to , can be dialled by pressing and holding the corresponding number key.Call waitingPress Menu, and select Settings, Call settings and Call waiting. Select Activate and the network will notify you of an incoming call while you have a call in progress (network service). See Call waiting on page 23.npl-2_en1_1.fm Page 55 Monday, September 2, 2002 2:38 PM
Menu functions56Summary after callPress Menu, and select Settings, Call settings and Summary after call. Select On and the phone will briefly display the duration and cost (network service) of the last call.Send my caller identityPress Menu, and select Settings, Call settings and Send my caller identity. Select Yes and your phone number will be displayed to the person you are calling (network service). Select Set by network and the setting agreed upon with your service provider is used.Line for outgoing callsLine for outgoing calls is a network service to select the phone line 1 or 2, that is subscriber number, for making calls.Press Menu, and select Settings, Call settings and Line for outgoing calls. If you select Line 2 and have not subscribed to this network service, you will not be able to make calls. However, calls on both lines can be answered regardless of the selected line.If supported by your SIM card, you can prevent the line selection by selecting the option Lock.For more information on availability, contact your network operator or service provider.Tip: In standby mode you can switch from one line to the other by pressing and holding .Phone settingsLanguagePress Menu, and select Settings, Phone settings and Language. Select the language for the display texts. If Automatic is selected, the phone selects the language according to the information on the SIM card.Automatic keyguardNote: When the keypad is locked, calls may be possible to the emergency number programmed into your phone (e.g. 112, 911 or other official emergency number). Key in the emergency number and press . The number is displayed only after you have keyed in its last digit.npl-2_en1_1.fm Page 56 Monday, September 2, 2002 2:38 PM
Menu functions57You can set the keypad of your phone to lock automatically after a preset time delay. You can set the delay time from 10 seconds up to 60 minutes and when the time is up, the keypad locks automatically preventing accidental keypresses.Press Menu, and select Settings, Phone settings and Automatic keyguard.• To activate the automatic keyguard, select On and the phone displays Set delay:. Key in the time and press OK.• To deactivate the automatic keyguard, select Off.Refer also Keypad lock (Keyguard) on page 19.Cell info displayPress Menu, and select Settings, Phone settings and Cell info display. Select On to set the phone to indicate when it is used in a cellular network based on Micro Cellular Network (MCN) technology.If the GPRS connection is set to Always online, the info messages may not be received. In that case, set the GPRS connection to When needed, see GPRS connection on page 76.Welcome notePress Menu, and select Settings, Phone settings and Welcome note. Key in the note you would like to be shown briefly when the phone is switched on. To save the note, press Options, and select Save.Network selectionPress Menu, and select Settings, Phone settings and Network selection. Select Automatic and the phone automatically selects one of the cellular networks available in your area.If you select Manual, you can select a network that has a roaming agreement with your home network operator. If No access is displayed, you must select another network. The phone stays in manual mode until the automatic mode is selected or another SIM card is inserted into the phone.Confirm SIM service actionsSee SIM services (Menu 13) on page 88.npl-2_en1_1.fm Page 57 Monday, September 2, 2002 2:38 PM
Menu functions58Help text activationTo set the phone to show or not to show the help texts, press Menu, and select Settings, Phone settings and Help text activation.See also Using the menu on page 34.Start-up toneTo set the phone to play or not to play a start-up tone when the phone is switched on, press Menu, and select Settings, Phone settings and Start-up tone. Display settings WallpaperYou can set your phone to display a background picture, wallpaper, when the phone is in standby mode. Some pictures are presaved in the Gallery menu. You can also receive pictures via multimedia message, download them from WAP pages or transfer them with PC Suite from your PC and then save them in Gallery. Your phone supports JPEG, GIF, BMP and PNG formats.To select a wallpaper picture1. Press Menu, and select Settings, Display settings and Wallpaper.2. Select Change image and the folder list in the Gallery menu will be shown.3. Select the folder and scroll to the desired picture.4. To set the picture as wallpaper, press Options and select Set as wallpaper.Note that if you delete the selected wallpaper picture from the gallery, it will still be used as wallpaper until you replace it with another picture.Note that the wallpaper is not displayed when the phone activates the screen saver.To activate or deactivate the wallpaperPress Menu, and select Settings, Display settings and Wallpaper. To activate/deactivate the wallpaper, select On/Off, respectively.npl-2_en1_1.fm Page 58 Monday, September 2, 2002 2:38 PM
Menu functions59Colour schemesYou can change the colour in some display components, for example, indicators and signal bars.Press Menu, and selectSettings, Display settings and Colour schemes. Select the desired colour scheme.Operator logoTo set your phone to display or hide the operator logo, press Menu, and selectSettings, Display settings and Operator logo.Note that the operator logo is not displayed when the phone activates the screen saver.For more information and availability of an operator logo via SMS, MMS or WAP, contact your network operator and/or WAP service provider, and see also PC Suite on page 89.Screen saverThe screen saver showing a digital clock is used for power saving in standby mode. It will be activated when no function of the phone is used for a certain time. Press any key to deactivate the screen saver. Screen saver is also deactivated when the phone is out of the network coverage area.Press Menu, and selectSettings, Display settings and Screen saver timeout. Select the timeout from 5 seconds to 5 minutes when the digital clock display will be activated.Note that the screen saver overrides all the graphics and texts on the display in standby mode.Display brightnessYou can change the display contrast level used on the phone display.Press Menu, and selectSettings, Display settings and Display brightness. Scroll with and to decrease and increase the contrast level, and press OK to accept it.npl-2_en1_1.fm Page 59 Monday, September 2, 2002 2:38 PM
Menu functions60Tone settingsPress Menu, and select Settings and then Tone settings. You can find the same settings in the Profiles menu, see Profiles (Menu 3) on page 53. Note that the settings you make, change the settings in the active profile.Select Incoming call alert to select how the phone notifies you of an incoming voice call. The options are Ringing, Ascending, Ring once, Beep once and Off.Select Ringing tone for incoming voice calls. To select ringing tones saved in the Gallery, select Open gallery from the ringing tone list.Select Ringing volume and Vibrating alert for incoming voice calls and incoming messages. The vibrating alert does not work when the phone is connected to a charger, desktop stand, or a car kit.Tip: If you receive a ringing tone via OTA or by downloading, you can save the ringing tone in the Gallery.Select Message alert tone to set the alert tone for the incoming messages, Keypad tones, or Warning tones to set the phone to sound tones for example, when the battery is running out of power.Select Alert for to set the phone to ring only upon calls from phone numbers that belong to a selected caller group. Scroll to the caller group you want or All calls and press Mark.Accessory settingsAccessory settings menu is shown only if the phone is or has been connected to one of the following accessories: headset HDB-4, handsfree unit CARK126, or mobile inductive loopset LPS-4.Press Menu, and select Settings and Accessory settings. You can select Headset, Handsfree or Loopset if the corresponding accessory is or has been connected to the phone.•Select Default profile to select the profile you want to be automatically activated when you connect the selected accessory. You can select another profile while the accessory is connected.npl-2_en1_1.fm Page 60 Monday, September 2, 2002 2:38 PM
Menu functions61•Select Automatic answer to set the phone to answer an incoming call automatically after five seconds. If the Incoming call alert is set to Beep once or Off, automatic answer will not be in use.•Select Lights to set the lights permanently On. Select Automatic to set the lights on for 15 seconds after a keypress. The Lights option is available only when Handsfree is selected.Security settingsNote: When security features that restrict calls are in use (call barring, closed user group and fixed dialling), calls may be possible to certain emergency numbers in some networks (e.g. 112, 911 or other official emergency numbers).Press Menu, and select Settings and Security settings. Select•PIN code request to set the phone to ask for your PIN code every time the phone is switched on. Some SIM cards do not allow the PIN code request to be turned off.•Call barring service (network service) to restrict incoming calls to and outgoing calls from your phone. A barring password is required.•Fixed dialling to restrict your outgoing calls to selected phone numbers if this function is supported by your SIM card. The PIN2 code is required.•Closed user group. Closed user group is a network service that specifies the group of people whom you can call and who can call you. For more information contact your network operator or service provider.•Security level. Select Phone and the phone will ask for the security code whenever a new SIM card is inserted into the phone.Select Memory and the phone will ask for the security code when SIM card’s memory is selected and you want to change the memory in use, (see Selecting the phone book settings on page 28) or copy from one memory to another (Copying phone books on page 30).•Access codes to change the security code, PIN code, PIN2 code or barring password. Codes can only include numbers from 0 to 9.npl-2_en1_1.fm Page 61 Monday, September 2, 2002 2:39 PM
Menu functions62Restore factory settingsTo reset some of the menu settings to their original values, press Menu, and select Settings and Restore factory settings. Key in the security code and press OK. Note that the data you have keyed in or downloaded, for example, the names and phone numbers saved in the phone book are not deleted.■Alarm clock (Menu 5)The alarm clock uses the time format set for the clock. The alarm clock works even when the phone is switched off.Press Menu, and select Alarm clock. Key in the alarm time and press OK. To change the time when the alarm time is set, select On.When the alarm time expiresThe phone will sound an alert tone, and flash Alarm! and the current time on the display.Press Stop to stop the alarm. If you let the phone continue to alarm for a minute or press Snooze, the alarm stops for about ten minutes and then resumes.If the alarm time is reached while the phone is switched off, the phone switches itself on and starts sounding the alarm tone. If you press Stop, the phone asks whether you want to activate the phone , Switch the phone on?. Press No to switch off the phone or Yes to switch on the phone.Note: Do not press Yes when wireless phone use is prohibited or when it may cause interference or danger.■Gallery (Menu 6)Note: Your phone must be switched on to use this function. Do not switch the phone on when wireless phone use is prohibited or when it may cause interference or danger.You can save images and ringing tones, for example, if received in a multimedia message, in the folders of the gallery, see Reading and replying to a multimedia message on page 45.npl-2_en1_1.fm Page 62 Monday, September 2, 2002 2:39 PM
Menu functions63You may save up to 60 ringing tones with an average size of 5kB of which 20 are removable and up to 35 images with an average size of 10kB. The gallery uses dynamic memory, see Dynamic memory on page 11.1. Press Menu and select Gallery. The list of options is shown.2. Select View folders to open the list of folders.Other options available are:•Delete folder to select the folder you want to delete. You can not delete the original folders in the phone.•Rename folder to select the folder you want to give a new name. You can not rename the original folders in the phone.•Add folder to add a new folder. Key in a name for the folder and press OK.•Gallery services to download more images and tones. Select Image services or Tone services, respectively. The list of available WAP bookmarks is shown. Select More bookmarks to access the list of WAP bookmarks in the Services menu, see Bookmarks on page 84. Select the appropriate bookmark to connect to the desired WAP page. If the connection fails, you may not be able to access the WAP page from the WAP service whose connection settings are currently active. In this case, enter the Services menu and activate another set of service settings, see Making a connection to a WAP service on page 80. Try again to connect to the WAP page.For the availability of different WAP services, pricing and tariffs, contact your network operator and/or the WAP service provider.3. Select the desired folder and the list of files in the folder is shown. Images and Tones are the original folders in the phone.npl-2_en1_1.fm Page 63 Monday, September 2, 2002 2:39 PM
Menu functions644. Scroll to the desired file. Press Options and some of the following options are available:•Open to open the seleted file.•Delete to delete the seleted file.•Set as wallpaper to set the selected file as wallpaper.•Set as ring tone to set the selected file as ringing tone.•Move to move a file to another folder.•Rename folder to give a new name for the file.•Details to see the details of the file, the size, for example.•Sort to sort the files and folders by date, type, name or size.■Organiser (Menu 7)Note: Your phone must be switched on to use the functions in Organiser menu. Do not switch the phone on when wireless phone use is prohibited or when it may cause interference or danger.CalendarThe calendar helps you to keep track of reminders, calls that you need to make, meetings, and birthdays.You may save up to 250 calendar notes. The calendar uses dynamic memory, see Dynamic memory on page 11.Press Menu, and select Organiser and Calendar. Tip: To quickly open the Calendar menu, press in standby mode.Scroll to the day you want. The current day is indicated with a frame around the day. If there are any notes set for the day, the day is bolded. To view the day notes, press Options and select Day notes.To view a single note, scroll to the note you want to view, press Options and select View. The note view allows you to view the details of the selected note. You can scroll through the note.npl-2_en1_1.fm Page 64 Monday, September 2, 2002 2:39 PM
Menu functions65The other options for the calendar views may include:• Options for making a note, for sending a note via IR, or as a note directly to another phone’s calendar or as a text message.• Options for deleting, editing, moving and repeating a note and for copying a note to another day.•Settings to set the date, time, date or time format, or the first day of the week. In the Auto-delete option you can set the phone to delete old notes automatically after a specified time. However, the repeat notes, for example, birthday notes, will not be deleted.Making a calendar noteFor keying in letters and numbers, see Writing text on page 25.Press Menu, and select Organiser and Calendar. Scroll to the date you want, press Options and select Make a note. Select one of the following note types:• Meeting - Key in the note or search for the name in the phone book. Press Options and select Save. Key in the location for the meeting and press OK. Key in the start time for the meeting and press OK, and then the end time and press OK. To set the alarm for the note, select With tone or Silent (no alarm tone) and then set the alarm time.• Call - Key in the phone number, press Options and select Save. Key in the name, press Options and select Save. (Instead of keying in the phone number, you can press Options to search for the name and number in the phone book.) Then key in the time for the call and press OK. To set the alarm for the note, select With tone or Silent (no alarm tone) and then set the alarm time.• Birthday - Key in the person’s name (or press Options to search for it in the phone book), press Options and select Save. Then key in the year of birth, and press OK. To set the alarm for the note, select With tone or Silent (no alarm tone) and then set the alarm time. • Memo - Key in the note, press Options and select Save. Key in the end day for the note and press OK. To set the alarm for the note, select With tone or Silent (no alarm tone) and then set the alarm time.npl-2_en1_1.fm Page 65 Monday, September 2, 2002 2:39 PM
Menu functions66• Reminder - Key in the subject for the reminder, press Options and select Save. To set the alarm for the note, select Alarm on and then set the alarm time.When you have set the alarm, the indicator is displayed when you view the notes.When the phone alarms for a noteThe phone beeps, and displays the note. With a call note on the display, you can call the displayed number by pressing . To stop the alarm and view the note, press View. To stop the alarm without viewing the note, press Exit.To-do listYou can save a note for a task that you have to do, select a priority level for the note and mark it as done when you have completed it. You can sort the notes by priority or by date.You may save up to 30 notes. The to-do list uses dynamic memory, see Dynamic memory on page 11.Press Menu, and select Organiser and To-do list and the list of notes is shown. Press Options, or scroll to the desired note and press Options.• To add a new note, select Add. Key in the subject for the note. When you have keyed in the maximum number of characters for a note, more characters are not accepted. Press Options and select Save. Select the priority for the note, High, Medium, or Low.Dictionary, refer to Setting predictive text input on or off on page 25.• You can set, delete and edit the deadline and an alarm for a note, and also view, delete or edit the selected note and delete all the notes that you have marked as done. You can edit the priority of the selected note, send a note to another phone, save a note as a calendar note, or access the calendar.npl-2_en1_1.fm Page 66 Monday, September 2, 2002 2:39 PM
Menu functions67■Games (Menu 8)Note: Your phone must be switched on to use this function. Do not switch the phone on when wireless phone use is prohibited or when it may cause interference or danger.Launching a game1. Press Menu, and select Games and Select game.2. Scroll to a game or a game set (name depends on the game).3. Press Options and select Open or press . If the selection is a single game it will be launched.Otherwise, a list of games in the selected game set is displayed. To launch a single game, scroll to the desired game and press Options and select Open, or press .Other options available for a game or game setOptions for games, see Other options available for an application or application set on page 69.Game servicesPress Menu, and select Games and Game services. The list of available WAP bookmarks is shown. Select More bookmarks to access the list of WAP bookmarks in the Services menu, see Bookmarks on page 84.Select the appropriate bookmark to connect to the desired WAP page. If the connection fails, you may not be able to access the WAP page from the WAP service whose connection settings are currently active. In this case, enter the Services menu and activate another set of service settings, see Making a connection to a WAP service on page 80. Try again to connect to the WAP page.For the availability of different WAP services, pricing and tariffs, contact your network operator and/or the WAP service provider.Note that when downloading a game or an application, it may be saved in Applications menu instead of the Games menu.npl-2_en1_1.fm Page 67 Monday, September 2, 2002 2:39 PM
Menu functions68Memory status for gamesTo view the size of memory available for game and application installations, press Menu, and select Games and Memory.You may save up to six applications and/or games with a maximum size of 64kB each. The games use dynamic memory, see Dynamic memory on page 11.Game settingsPress Menu, and select Games and Settings to set sounds, lights and shakes for the game. You can save your Club Nokia membership number, Club Nokia ID. For more information on Club Nokia and the game services, visit www.club.nokia.com. Availability may vary by country.■Applications (Menu 9)Note: The phone must be switched on to use this function. Do not switch on the phone when the use of a wireless phone is prohibited or when it may cause interference or danger.This menu allows the management of Java applications installed on your phone. Your phone software includes some Java applications specially designed for this Nokia phone. Various service providers offer other applications via WAP services. Before you can use one of these applications you have to download it to your phone.Launching an application1. Press Menu, and select Applications and Select application.2. Scroll to an application or an application set (name depends on the application).3. Press Options and select Open or press . If the selection is a single application it will be launched.Otherwise, a list of applications in the selected application set is displayed. To launch a single application, scroll to the desired application and press Options and select Open, or press .npl-2_en1_1.fm Page 68 Monday, September 2, 2002 2:39 PM
Menu functions69Other options available for an application or application set•Delete to delete the application or application set from the phone.Note that if you delete a pre-installed application or an application set from your phone, you may download it back to your phone from the Nokia Software Market, www.softwaremarket.nokia.com/wap.•Web access to restrict the application for accessing the network. Select Ask first and the phone asks for net access, Allowed to allow the net access, or Not allowed not to allow the net access.•Check version to check if a new version of the application is available for download from the WAP services.•Web page to provide further information or additional data for the application from an Internet page. This feature needs to be supported by the network. It is only shown if an Internet address has been provided with the application.•Details to give additional information about the application.Downloading an applicationYou can download new Java applications in different ways:• Press Menu, and select Applications and App. services and the list of available WAP bookmarks is shown. Select More bookmarks to access the list of WAP bookmarks in the Services menu, see Bookmarks on page 84.Select the appropriate bookmark to connect to the desired WAP page. If the connection fails, you may not be able to access the WAP page from the WAP service whose connection settings are currently active. In this case, enter the Services menu and activate another set of service settings, see Making a connection to a WAP service on page 80. Try again to connect to the WAP page.For the availability of different WAP services, pricing and tariffs, contact your network operator and/or the WAP service provider.• Press Menu, and select Services to find a WAP page to download an appropriate Java application. See Browsing the pages of a WAP service on page 81.• Use the game download functionality, see Game services on page 67.npl-2_en1_1.fm Page 69 Monday, September 2, 2002 2:39 PM
Menu functions70• Use the Java Application installer from PC Suite to download the applications in your phone.Note that Nokia does not warrant for applications from non-Nokia sites. If you choose to download Java applications from them, you should take the same precautions, for security or content, as you would with any site. Note that when downloading a game or an application, it may be saved in Games menu instead of the Applications menu.The following texts may appear during a download or during an operation of a Java application:•Action failed , too many applications in the phone. Erase any unwanted application and download again.•Application error , an error occurs in the running application.•Application not supported , the application is incompatible with the phone.•Call in progress , the application tries to establish a web connection while the phone is already in call.•File format not recognised , either the application is invalid or the transfer from PC has not finished.•File too large , a file is too large to run on the phone or the gateway does not support large files.•Invalid file , the application is invalid.•Launch failed , the phone couldn't start the application. Please try again.•Unable to run application , there is insufficient resource to run the application. End any active calls or features and try to open the application again.•Unknown (appearing in the Application's list), the application has no name.npl-2_en1_1.fm Page 70 Monday, September 2, 2002 2:39 PM
Menu functions71Memory status for applicationsTo view the size of memory available for game and application installations, press Menu, and select Applications and Memory.You may save up to six applications and/or games with a maximum size of 64kB each. The applications use dynamic memory, see Dynamic memory on page 11.■Extras (Menu 10)Note: Your phone must be switched on to use the functions in Extras menu. Do not switch the phone on when wireless phone use is prohibited or when it may cause interference or danger.CalculatorThe calculator in your phone adds, subtracts, multiplies, divides, counts the square and the square root and converts currency values.This calculator has a limited accuracy and rounding errors may occur, especially in long divisions.1. Press Menu, and select Extras and Calculator.2. When ’0’ is displayed on the screen, key in the first number in the calculation, press for a decimal point.3. Press Options and select Add, Subtract, Multiply, Divide, Square, Square root or Change sign.Tip: Alternatively, press once to add, twice to subtract, three times to multiply or four times to divide.4. Key in the second number.5. For a total, press Options and select Equals. Repeat steps 3 to 5 as many times as is necessary.6. To start a new calculation, first press and hold Clear.npl-2_en1_1.fm Page 71 Monday, September 2, 2002 2:39 PM
Menu functions72Making a currency conversion1. Press Menu, and select Extras and Calculator.2. To save the exchange rate, press Options and select Exchange rate. Select either of the displayed options. Key in the exchange rate, press for a decimal point, and press OK. The exchange rate remains in the memory until you replace it with another one.3. To make the currency conversion, key in the amount to be converted, press Options and select In domestic or In foreign.Tip: You can also make the currency conversion in standby mode. Key in the amount to be converted, press Options and select In domestic or In foreign.Countdown timerPress Menu, and select Extras and Countdown timer. Key in the alarm time in hours and minutes and press OK. If you wish, write your own note text which is displayed when the time expires, and press OK to start the countdown timer.• To change the countdown time, select Change time, or to stop the timer, select Stop timer.If the alarm time is reached when the phone is in standby mode, the phone sounds a tone and flashes the note text if it is set or else Countdown time up. Stop the alarm by pressing any key. If no key is pressed, the alarm automatically stops within 30 seconds. To stop the alarm and to delete the note text, press OK.StopwatchYou can measure time, take intermediate times or lap times using the stopwatch. During timing, the other functions of the phone can be used. To set the timing in the background, press .Using the stopwatch consumes the battery and the phone's operating time will be reduced. Be careful not to let it run in the background when performing other operations with your phone.npl-2_en1_1.fm Page 72 Monday, September 2, 2002 2:39 PM
Menu functions73Time observation and time splitting1. Press Menu, and select Extras, Stopwatch and Split timing. You can select Continue if you have set the timing in the background.2. Press Start to start the time observation. Press Split every time you want to take an intermediate time. The intermediate times are listed below the running time on the display. Scroll to view the times.3. Press Stop to stop the time observation.4. Press Options and selectStart to start the time observation again. The new time is added to the previous time.Save to save the time. Key in a name for the measured time and press OK. If no name is keyed in, the total time is used as a title.Reset to reset the time without saving it.Lap timesPress Menu, and select Extras, Stopwatch and Lap timing. Press Start to start the time observation and Lap to take a lap time. Press Stop to stop the lap timing. Press Options and you can save or reset the lap times. Refer to Time observation and time splitting above.Viewing and deleting timesPress Menu, and select Extras, and Stopwatch.If the stopwatch is not reset, you can select Show last to view the latest measured time. Select View times and a list of names or final times of the time sets is shown, select the time set you want to view. To delete the saved times, select Delete times. Select All at once and press OK, or select One by one, scroll to the times you want to delete, press Delete and press OK.WalletIn Wallet you can save personal information, for example, credit card information and make purchases with your phone.You can access the wallet via the Wallet menu or via the WAP browser, see Options while browsing on page 82.npl-2_en1_1.fm Page 73 Monday, September 2, 2002 2:39 PM
Menu functions74When you access the wallet for the first time, you need to create your own wallet code. At Create wallet code: key in the code and press OK to confirm it and at Verify wallet code: key in the code again and press OK.If you want to delete all the content of the wallet and the wallet code, key in *#3925538# (*#ewallet# in letters) in standby mode. You also need the security code of the phone. See also Access codes on page 7Saving and changing personal card informationTo access the wallet, press Menu, select Extras and Wallet. If needed, key in your wallet code and press OK, see Wallet settings on page 75. Select Cards to view the list of cards. The maximum amount of cards is five. Scroll to the desired card.• To save information on a card, press Options and select View. Select•Card info to key in, for example, the card holder’s name, card type, number and expiry information.•User info to save user name and password.•Shipping info to save your contact information.•Billing info to save the contact information in case the invoicing address differs from the stored address, which may be the case with company credit cards.•Receipt info to save phone numbers and e-mail addresses where you want the service provider to send a receipt of your purchase.• To make a copy of the card, press Options and select Copy card.• To delete all the information of the card, press Options and select Clear card.• To rename the card, press Options and select Rename card.Personal notesYou can save up to 30 confidential personal notes, for example, passwords, codes or notations. Press Menu, select Extras, Wallet and Personal notes. Press Options and you can view, add, edit a selected note and sort notes either by name or date. Send as text copies the note to a text message. Copy to calendar copies the note to the calendar as a reminder. Use number extracts numbers from a note. npl-2_en1_1.fm Page 74 Monday, September 2, 2002 2:39 PM
Menu functions75Wallet settingsPress Menu, select Extras, Wallet and Settings. Select•Code request to set the wallet code request to on or off. You need to key in the correct wallet code before you can set the code request to on or off. •Change code to change the wallet code.Guidelines for paying your purchases with wallet1. Access the desired WAP site to do shoppings, see Making a connection to a WAP service on page 80, and choose the product you want to buy.2. To pay your purchases, press Options and select Use wallet info. See Options while browsing on page 82.3. Select the card you want to pay with. Fill in the data form you receive from the service provider by transferring the credit card details from the wallet. If you want to fill in all the fields automatically, select Fill in all fields. The option is shown only when the WAP service supports the Electronic Commerce Modeling Language standard. You can also fill the form by selecting information fields from the card one by one. The phone displays the filled form.4. Approve the purchase, and the information is sent forward.5. To close the wallet, select Close wallet. See Options while browsing on page 82.■Connectivity (Menu 11)InfraredYou can set up the phone to receive data through its infrared (IR) port. To use an IR connection, the device with which you want to establish a connection must be IrDA compliant. You can send or receive data such as business cards and calendar notes to or from a compatible phone or data device (for example, a computer) via the IR port of your phone.Do not point the IR (infrared) beam at anyone's eye or allow it to interfere with other IR devices. This device is a Class 1 Laser product.npl-2_en1_1.fm Page 75 Monday, September 2, 2002 2:39 PM
Menu functions76Note: Your phone must be switched on to use this function. Do not switch the phone on when wireless phone use is prohibited or when it may cause interference or danger.Sending and receiving data via IR• Ensure that the IR ports of the sending and receiving devices are pointing at each other and that there are no obstructions between the devices. The preferable distance between the two devices in an infrared connection is 60 cm (24 inches) at most.• To activate the IR port of your phone to receive data via IR, press Menu, and select Connectivity and Infrared.• The user of the sending phone selects the desired IR function to start data transfer.If data transfer is not started within two minutes after the activation of the IR port, the connection is cancelled and has to be started again.IR connection indicator• When is shown continuously, the IR connection is activated and your phone is ready to send or receive data via its IR port.• When blinks, your phone is trying to connect to the other device or a connection has been lost.GPRSGPRS connectionYou can set the phone to automatically register to a GPRS network when you switch the phone on. Press Menu, and select Connectivity, GPRS, GPRS connection and Always online. Starting a WAP or PC dial-up application, or sending/receiving multimedia messages creates the connection between phone and network and data transfer is possible. When you end the application, GPRS connection is ended but the registration to the GPRS network remains.If you select When needed, the GPRS connection is established when an application needs it and closed when you end the application.npl-2_en1_1.fm Page 76 Monday, September 2, 2002 2:39 PM
Menu functions77GPRS modem settingsYou can connect the phone via infrared or data cable connection to a compatible PC and use the phone as a modem to enable GPRS connectivity from the PC.Press Menu, and select Connectivity, GPRS and GPRS modem settings. Select Active access point and activate the access point you want to use. Select Edit active access point to change the access point settings.• Scroll to Alias for access point and press Select. Key in the name you would like for the activated access point and press OK.• Scroll to GPRS access point and press Select. Key in the Access Point Name (APN) and press OK.An access point name is needed to establish a connection to a GPRS network. You can obtain the Access Point Name from your network operator or service provider.You can also set the GPRS dial-up service settings (Access Point Name) on your PC by using the Nokia Modem Options software, see PC Suite on page 89. If you have set the settings both on your PC and on your phone, note that the settings set on the PC will be used.■Services (Menu 12)You can access various WAP services such as banking, news, weather reports and flight times. These services are specially designed for mobile phones and they are maintained by WAP service providers.Check the availability of WAP services, pricing and tariffs with your network operator and/or the service provider whose service you wish to use. Service providers will also give you instructions on how to use their services.Note: Your phone must be switched on to use this function. Do not switch the phone on when wireless phone use is prohibited or when it may cause interference or danger.WAP services use the Wireless Mark-Up Language (WML) on their WAP pages. Internet web pages cannot be viewed on your phone.npl-2_en1_1.fm Page 77 Monday, September 2, 2002 2:39 PM
Menu functions78Basic steps for accessing and using WAP services1. Save the service settings that are needed to access the WAP service that you want to use. See page 83.2. Make a connection to the given WAP service. See page 80.3. Start browsing the pages of the WAP service. See page 81.4. Once you are finished browsing, end the connection to the WAP service. See page 83.Setting up the phone for a WAP serviceYou may receive the service settings as a text message from the network operator or service provider that offers the WAP service that you want to use. For more information, contact your network operator or service provider, or visit Club Nokia’s website (www.club.nokia.com).You can also key in the settings manually or add and edit the settings with PC Suite. For appropriate settings, contact your network operator or service provider. The WAP settings may be available, for example, on their website.Saving the service settings received as a text messageWhen you receive the service settings as a text message, Service settings received is displayed.• To save the received settings, press Options and select Save.If no settings are saved in Active service settings, the settings are saved under the first free connection set and also activated.If there are settings saved in Active service settings, Activate saved service settings? will be displayed. To activate the saved settings, press Yes, or to save them only, press No.• To discard the received settings, press Options and select Discard.• To view the received settings first, press Options and select View. To save the settings, press Save.npl-2_en1_1.fm Page 78 Monday, September 2, 2002 2:39 PM
Menu functions79Keying in the service settings manually1. Press Menu, and select Services, and Settings.2. Select Active service settings.You need to activate the set where you want to save the service settings. A set is a collection of settings needed for making a connection to a WAP service.3. Scroll to the set you would like to activate and press Activate.4. Select Edit active service settings.Select each of the following service settings one by one and key in all the required settings.•Settings' name - Key in the new name for the connection set and press OK.•Homepage - Key in the homepage address of the WAP service that you want to use, press for a dot, and press OK.•Session mode - Select Permanent or Temporary.•Connection security - Select On or Off.When the connection security is On, the phone tries to use a secure connection with the WAP service. If a secure connection is not available, the connection will not be made. If you wish to connect anyway, with a non-secure connection, you must set the connection security to Off.•Data bearer - Select GSM data or GPRS. Settings for the selected bearer, see Settings when GSM data is the selected data bearer and Settings when GPRS is the selected data bearer below.For pricing, connection speed and other information, contact your network operator or service provider.Settings when GSM data is the selected data bearer•Dial-up number - Key in the phone number and press OK.•IP address - Key in the address, press for a dot, and press OK. You obtain the IP address from your network operator or service provider.•Authentication type - Select Secure or Normal.•Data call type - Select Analogue or ISDN.npl-2_en1_1.fm Page 79 Monday, September 2, 2002 2:39 PM
Menu functions80•Data call speed - Select the speed you want to use, or select Automatic. Automatic is available only if the current selected data call type is Analogue. The actual data call speed depends on the service provider.•Login type - Select Manual or Automatic.•User name - Key in the user name and press OK.•Password - Key in the password and press OK.Settings when GPRS is the selected data bearer•GPRS access point - Key in the access point name and press OK.An access point name is needed to establish a connection to a GPRS network. You obtain the access point name from your network operator or service provider.•IP address - Key in the address, press for a dot , and press OK. You obtain the IP address from your network operator or service provider.•Authentication type - Select Secure or Normal. If you select Automatic, the login type uses the user name and password keyed in the following settings. If you select Manual, the login information is required when establishing a connection.•Login type - Select Manual or Automatic. •User name - Key in the user name and press OK.•Password - Key in the password and press OK.Making a connection to a WAP serviceFirstly, make sure that the service settings of the WAP service you want to use are activated. To activate the settings:•Press Menu, and select Services and Settings. Select Active service settings and scroll to the set you want to activate and press Activate.Secondly, make a connection to the WAP service. There are three ways to connect:npl-2_en1_1.fm Page 80 Monday, September 2, 2002 2:39 PM
Menu functions81• Open the homepage of the WAP service:Press Menu, and select Services and Home.Tip: To quickly open the homepage, press and hold in standby mode.OR• Select a bookmark of the WAP service:Press Menu, and select Services, Bookmarks, and select a bookmark.If the bookmark does not work with the current active service settings, activate another set of service settings and try again.OR• Key in the address of the WAP service:Press Menu, and select Services and then Go to address. Key in the address of the WAP service, press for special characters, and press OK.Note that it is not necessary to add the prefix http:// in front of the address since it will be added automatically.Browsing the pages of a WAP serviceAfter you have made a connection to the WAP service, you can start browsing its WAP pages. The function of the phone keys may vary in different WAP services. Follow the text guides on the phone display. For more information, contact your WAP service provider.Note that if GPRS is selected as the data bearer, the indicator is shown on the top left of the display during browsing. If you receive or make a call during a GPRS connection, the indicator will be shown on the top right of the display to indicate that the GPRS connection is suspended.Using the phone keys while browsing• Use the scroll keys or to browse the WAP page.• To select a highlighted item, press .• To enter letters and numbers, press the keys - and to enter special characters, press the key .npl-2_en1_1.fm Page 81 Monday, September 2, 2002 2:40 PM
Menu functions82Options while browsingPress Options and select one of the options available. The service provider may also offer other options. Select•Home to go back to the homepage of the WAP service.•Bookmarks. See page 84.•Call / Edit / Open row / Open link / Open list to call, to key in text or to select a highlighted item on the WAP page.•Add bookmark to save the WAP page as a bookmark.•View image or View images to view images and animations from the WAP page.•Go to address to key in the address of the WAP service you want to access.•Service inbox. See page 84.•Use wallet info and Close wallet. See Guidelines for paying your purchases with wallet on page 75.•Appear. settings. See Appearance settings of WAP browser on page 83.•Cookie settings. See page 83.•Use number to copy a number from the WAP page for saving or making a call. If the WAP page contains several numbers, you may select the desired one.•Reload to reload and update the current WAP page.•Clear the cache. See The cache memory on page 85.•Security info to view security information about the current WAP connection and the server.•Quit. See Ending a WAP connection on page 83.Direct callingThe WAP browser supports functions which you can access while browsing. You can make a voice call, send DTMF tones while a voice call is in progress, and save in the phone book a name and a phone number from a WAP page.npl-2_en1_1.fm Page 82 Monday, September 2, 2002 2:40 PM
Menu functions83Ending a WAP connectionTo quit browsing and to end the connection, press Options and select Quit. When Quit browsing? is shown, press Yes.Alternatively, press . If GSM data is the selected data bearer, press twice. The phone ends the connection to the WAP service.Appearance settings of WAP browser1. While browsing, press Options and select Appear. settings, or in standby mode, press Menu, and select Services, Settings and Appearance settings.2. Select Text wrapping or Show images.3. Select On or Off for Text wrapping and Yes or No for Show images.When Text wrapping is set to On, the text continues on the next line if it cannot be shown on one line. If you select Off, the text is abbreviated if it is too long to be shown on one line.When Show images is set to No, any pictures appearing on the WAP page are not shown. This can speed up the browsing of WAP pages that contain a lot of pictures.Cookie settingsYou can set the phone to allow or prevent receiving cookies.A cookie is data that a WAP site saves in your phone’s browser cache memory. The data can be, for example, your user information or your browsing preferences. Cookies will be saved until you clear the cache memory, see The cache memory on page 85.1. While browsing, press Options and select Cookie settings, or in standby mode, press Menu, and select Services and Settings.2. Select Cookies and select Allow or Reject to allow or prevent the phone receiving cookies.npl-2_en1_1.fm Page 83 Monday, September 2, 2002 2:40 PM
Menu functions84BookmarksYou can save up to 30 WAP page addresses as bookmarks in the phone’s memory.1. While browsing, press Options and select Bookmarks, or in standby mode, press Menu, and select Services and Bookmarks.2. Scroll to the bookmark you want to use and press Options.3. Select one of the following options:Go to to make a connection to the WAP page associated with the bookmark. Edit or Delete to modify or delete the selected bookmark.Send to send the selected bookmark directly to another phone select As bookmark, or to send the bookmark as a text message, select As text message.New bookmark to create a new bookmark without connection to the WAP service. Key in the address and the title of the WAP page and press OK.Note that your phone may have some pre-installed bookmarks for sites not affiliated with Nokia. Nokia does not warrant or endorse these sites. If you choose to access them, you should take the same precautions, for security or content, as you would with any Internet site, for example. Receiving a bookmarkWhen you have received a bookmark as a text message, press Options and select View to view the bookmark, Save to save the bookmark, or Discard to discard it.Service inboxThe phone is able to receive service messages (pushed messages) sent by your service provider. Service messages are notifications of, for example, news headlines, and they may contain a text message or address of a WAP service.To access the Service inbox in standby mode, when you have received a service message, press View.npl-2_en1_1.fm Page 84 Monday, September 2, 2002 2:40 PM
Menu functions85• If you press Exit the message is moved to the Service inbox. To access the Service inbox later, press Menu, and select Services, and Service inbox.To access the Service inbox while browsing, press Options and select Service inbox. Scroll to the message you want, press Options and select•Retrieve to activate the WAP browser and download the indicated content.•Details to display detailed information on the service notification.•Delete to delete the selected service notification.To set the phone to receive service messagesPress Menu, and select Services, Settings, Service inbox settings, and Service messages. To set the phone to receive service messages, select On. If you select Off, the phone will not receive service messages.The cache memoryNote: The information or services you have accessed are stored in the cache of your phone. A cache is a buffer memory, which is used to store data temporarily. If you have tried to access or have accessed confidential information requiring passwords (for example, your bank account), empty the cache of your phone after each use.To empty the cache,• while browsing, press Options and select Clear the cache, or• in standby mode, press Menu, and select Services, and Clear the cache.Authority certificatesFor using some WAP services, such as banking services, you need security certificates. Using the certificates can help you improve the security of connections between your phone and a WAP gateway or WAP server, if the Connection security is set to On.You can download authority certificate from a WAP page, if the WAP service supports the use of authority certificates. After the download, you can view the certificate and then save or delete it. If you save the certificate, it is added to the certificate list in the phone.npl-2_en1_1.fm Page 85 Monday, September 2, 2002 2:40 PM
Menu functions86The phone indicates if the identity of the WAP server or WAP gateway cannot be verified, if the WAP server or WAP gateway certificate is not authentic or if you do not have the correct authority certificate in your phone.Viewing the list of authority certificatesPress Menu, select Services, and Settings. Select Authority certificates.See also Security info in Using the phone keys while browsing on page 81.Security indicatorIf the security indicator is displayed during a WAP connection, the data transmission between the phone and the WAP gateway or WAP server (identified by the IP address in the Edit active service settings) is encrypted.However, the security indicator does not indicate that the data transmission between the gateway and the content server (the location where the requested resource is stored) is secure. It is up to the service provider to secure the data transmission between the gateway and the content server.Browser securitySecurity features are needed for some WAP services, such as banking or shopping services on a WAP site. For such connections you need security certificates and probably a security module which may be available on your SIM card. For more information, contact your service provider.Security moduleThe security module provides security services for WAP related applications, and allows you to use digital signatures. The security module can contain user and/or authority certificates as well as private and public keys. The certificates are saved in the security module by the SIM card issuer or the service provider.Press Menu, and select Services, Settings and Security module settings. Select•Security module details to show the security module title, its status, manufacturer and serial number.npl-2_en1_1.fm Page 86 Monday, September 2, 2002 2:40 PM
Menu functions87•Change signing PIN to select the signing PIN you want to change. Key in the current signing PIN code. Press Change and key in the new code twice.See also Access codes on page 7.CertificatesThere are three kinds of certificates; server certificates, authority certificates and user certificates. Authority certificates can either be saved in the security module by the SIM card issuer or service provider, or they can be downloaded from a WAP page and be saved in the phone’s memory or on the SIM card. User certificates are saved in the security module by the SIM card issuer or the service provider. Server certificates are not saved.• Server certificatesA server certificate is sent from the WAP server to the phone and its validity is checked using the authority certificates saved in the phone or the security module. The phone indicates if the identity of the WAP server or WAP gateway cannot be verified, if the WAP server or WAP gateway certificate is not authentic or if you do not have the correct authority certificate in your phone.The security indicator is displayed during a WAP connection, if the data transmission between the phone and the WAP gateway or WAP server (identified by the IP address in the Edit active service settings) is encrypted.It is up to the service provider to secure the data transmission between the gateway and the content server.• Authority certificatesAuthority certificates are used by some WAP services, such as banking services, for checking signatures of server certificates or other authority certificates.• User certificatesUser certificates are issued to users by a Certifying Authority. They associate a user with a specific private key in a security module and are used for digital signature.npl-2_en1_1.fm Page 87 Monday, September 2, 2002 2:40 PM
Menu functions88Digital signatureYou can make digital signatures with your phone. The signature can be traced back to you via the user certificate that was used to perform the signature. Making the digital signature can be the same as signing your name to a paper bill, contract or other document.For issuing a digital signature, select a link on a WAP page, for example, the title of the book you want to buy and its price. The text to sign, possibly including amount and date, for example, will be shown. Check that the header text is Read and the digital signature icon is shown. Note: If the digital signature icon does not appear, there is a security breach, and you should not enter any personal data such as your signing PIN.To sign the text, read all of the text first and then you can select Sign.Note: The text may not fit within a single screen. Therefore, make sure to scroll through and read all of the text before signing.Select the user certificate you want to use. Key in the signing PIN (see Access codes on page 7) and press OK. The digital signature icon will disappear, and the WAP service may display a confirmation of your purchase.■SIM services (Menu 13)In addition to the functions available on the phone, your SIM card may provide additional services that you can access in menu 13. Menu 13 is shown only if it is supported by your SIM card. The name and contents of the menu depends on the available services.Note: For availability, rates and information on using SIM services, contact your SIM card vendor, e.g. network operator, service provider or other vendor.You can set the phone to show you the confirmation messages sent between your phone and the network when you are using the SIM services by selecting the option Yes within the menu Confirm SIM service actions, menu 4-3-6.Note that accessing these services may involve sending a text message (SMS) or making a phone call for which you may be charged.npl-2_en1_1.fm Page 88 Monday, September 2, 2002 2:40 PM
PC Connectivity898. PC ConnectivityYou can send and receive e-mails, and access the Internet when your phone is connected to a compatible PC via an IR connection or a data cable. You can use your phone with a variety of PC connectivity and data communications applications. With the PC suite you can, for example, send text and picture messages, synchronise contacts, calendar and to-do notes between your phone and the PC and manage your WAP bookmarks and connection sets.You may find more information and downloadable files on the Nokia website, www.nokia.com/phones/productsupport/6100.■PC SuiteThe PC Suite contains the following applications :•Nokia Application Installer to install Java applications from the PC to the phone.•Nokia Image Converter to make images usable for multimedia messages, wallpapers or operator logos and to transfer them to your phone.•Nokia Sound Converter to edit polyphonic ringing tones to be compatible with your phone and to transfer them to your phone.•Nokia Content Copier to copy data or back-up data from your phone to PC or to another Nokia phone.•Nokia PC WAP Manager to edit and send your WAP bookmarks or update the connection sets to your phone.•Nokia Phone Editor to send text messages and edit the phone book, profiles and message settings of your phone.•Nokia PC Sync to synchronise the phone book, calendar and to-do notes between your phone and PC.•Nokia PC Graphics to create and edit picture messages for previous compatible Nokia phone models, for example, Nokia 8310.•Nokia PC Composer to create monophonic ringing tones for previous compatible Nokia phone models, for example, Nokia 8310.npl-2_en1_1.fm Page 89 Monday, September 2, 2002 2:40 PM
PC Connectivity90• Nokia 6100 data modem drivers enable you to use your phone as a modem.•Nokia Modem Options contains settings for HSCSD and GPRS connections.•Nokia Connection Manager to select the connection type between the PC and the phone.GPRS and HSCSDWith your phone you can use GPRS (General Packet Radio Service) and HSCSD (High Speed Circuit Switched Data) high-speed data services.For availability and subscription to high-speed data services, contact your network operator or service provider.Note that the use of HSCSD service consumes the phone’s battery faster than normal voice or data calls. You may need to connect the phone to a charger for the duration of data transfer.See GPRS modem settings on page 77.■Using data communication applicationsFor information on using a data communication application, refer to the documentation provided with it.1. If you use IR connection:• Activate the IR connection in the phone, see Infrared on page 75. Make sure that the connection is active in your PC.If you use the cable DKU-5:• Connect the cable to the USB port on the back of your computer and to the connector on your phone.2. Start using the data communications application on the computer.Note that making or answering phone calls during a computer connection is not recommended as it might disrupt the operation.For better performance during data calls, place the phone on a stationary surface with the keypad facing downward. Do not move the phone by holding it in your hand during a data call.npl-2_en1_1.fm Page 90 Monday, September 2, 2002 2:40 PM
Battery statements919. Battery statements■Charging and DischargingYour phone is powered by a rechargeable battery.Note that a new battery's full performance is achieved only after two or three complete charge and discharge cycles!The battery can be charged and discharged hundreds of times but it will eventually wear out. When the operating time (talk-time and standby time) is noticeably shorter than normal, it is time to buy a new battery.Use only batteries approved by the phone manufacturer and recharge your battery only with the chargers approved by the manufacturer. Unplug the charger when not in use. Do not leave the battery connected to a charger for longer than a week, since overcharging may shorten its lifetime. If left unused a fully charged battery will discharge itself over time.Temperature extremes can affect the ability of your battery to charge.Use the battery only for its intended purpose.Never use any charger or battery which is damaged.Do not short-circuit the battery. Accidental short-circuiting can occur when a metallic object (coin, clip or pen) causes direct connection of the + and - terminals of the battery (metal strips on the battery) for example when you carry a spare battery in your pocket or purse. Short-circuiting the terminals may damage the battery or the connecting object.Leaving the battery in hot or cold places, such as in a closed car in summer or winter conditions, will reduce the capacity and lifetime of the battery. Always try to keep the battery between 15°C and 25°C (59°F and 77°F). A phone with a hot or cold battery may temporarily not work, even when the battery is fully charged. Batteries' performance is particularly limited in temperatures well below freezing.Do not dispose of batteries in a fire !Dispose of batteries according to local regulations (e.g. recycling). Do not dispose as household waste.npl-2_en1_1.fm Page 91 Wednesday, August 7, 2002 10:20 AM
9210. Technical InformationWeight....................................77 grams (6.4 ounces) with BL-4C batteryBattery....................................720 mAh Li-polymer BatteryNetworks................................Wireless networks GSM 900, 1800 and1900Size (volume)........................3.69 cubic inches (60.3 cc)Frequency range (Tx)..................................................GSM 900: 880 - 915 Mhz..................................................GSM 1800: 1710 - 1785 Mhz..................................................GSM1900: 1850 - 1910 MhzFrequency range (Rx)..................................................GSM 900: 925 - 960 Mhz..................................................GSM1800: - 1805 - 1865 Mhz..................................................GSM1900: - 1930 - 1990 MhzTx output power..................2 W (Max)Battery voltage ....................3.7 v DCNumber of channels...........299FCC_Layout.fm Page 92 Monday, September 2, 2002 2:52 PM
9311 . Pa t e n t sManufactured or sold under one or more of the following US Patents.Asterisk (*) indicates design patents pending.:4558302486884649691924969192500137250459735061928510117552128345230091523363452412845241583530340453111795331638533536253533285384782539022353966575400949541643554425215444816544636454794765487084549325555198855526366555312555576395581244562527456403955664053566906956776205692032569940656994825699482570139257013925729534572954157346835754976575497657605685782646579414258024655805084580530158184375827082583588958391015844884584521958571515862178587068358872665889770589247558989255907823591479659154405917868592082659261385926769593023359466515953541595662559566335960389596390159663745966378597005959871375991716599185759995236005857601155460118536014573602616160285676029128603823860437606047196604979660554396060193606992360815346084962608874660945876097964611209961156176118775612249861283226128509613809161442436144676615148561515076163609616454761672486170073618529561889096195338619903562018766219560624007662400796249584626633062823736289205629266862952866310609632441229137976*29137979*29137984*29138033*29138035*29138036*D406261D410623D410892D412484D417428D425480D426830D445415RE32580FCC_Layout.fm Page 93 Wednesday, August 7, 2002 1:34 PM
94CARE AND MAINTENANCEYour phone is a product of superior design and craftsmanship and should be treated with care. The suggestions below will help you to fulfil any warranty obligations and to enjoy this product for many years.• Keep the phone and all its parts and accessories out of the reach of small children.• Keep the phone dry. Precipitation, humidity and all types of liquids or moisture can contain minerals that will corrode electronic circuits.• Do not use or store the phone in dusty, dirty areas. Its moving parts can be damaged.• Do not store the phone in hot areas. High temperatures can shorten the life of electronic devices, damage batteries, and warp or melt certain plastics.• Do not store the phone in cold areas. When it warms up (to its normal temperature), moisture can form inside, which may damage electronic circuit boards.• Do not attempt to open the phone. Non-expert handling may damage it.• Do not drop, knock or shake the phone. Rough handling can break internal circuit boards.• Do not use harsh chemicals, cleaning solvents, or strong detergents to clean the phone.• Do not paint the phone. Paint can clog the moving parts and prevent proper operation.• Use only the supplied or an approved replacement antenna. Unauthorised antennas, modifications or attachments could damage the phone and may violate regulations governing radio devices.All of the above suggestions apply equally to your phone, battery, charger or any accessory. If any of them is not working properly, take it to your nearest qualified service facility. The personnel there will assist you and, if necessary, arrange for service.FCC_Layout.fm Page 94 Wednesday, August 7, 2002 1:34 PM
95IMPORTANT SAFETY INFORMATION■Traffic safetyDon’t use a hand-held telephone while driving a vehicle. If you’re using a hand-held phone, park the vehicle before conversing. Always secure the phone in its holder and don’t place the phone on the passenger seat or where it can break loose in a collision or sudden stop.■Operating environmentRemember to follow any special regulations and always switch off your phone wherever forbidden, or when it may cause interference or danger. When connecting the phone or accessory to another device, read its user’s guide for safety instructions. Don’t connect incompatible products. As with other mobile radio transmitting equipment, users are advised to operate this equipment only in the normal operating position (held to your ear with the antenna pointing over your shoulder).■PacemakersPacemaker manufacturers recommend a distance of 20 cm (6 inches) be maintained between a hand-held wireless phone and a pacemaker to avoid interference with the pacemaker. These recommendations are consistent with independent research and recommendations of Wireless Technology Research.PERSONS WITH A PACEMAKER:• Should always keep the phone more than 20 cm (6 inches) from their pacemaker when the phone is switched on.• Should not carry the phone in a breast pocket.• Should use the ear opposite the pacemaker to minimize the potential for interference.• Should switch off the phone immediately if there is any reason to suspect that interference is taking place.FCC_Layout.fm Page 95 Wednesday, August 7, 2002 1:34 PM
96■Hearing aidsSome digital wireless phones may interfere with hearing aids. In the event of such interference, consult your wireless provider.Other medical devicesOperation of any radio transmitting equipment, including cellular phones, may interfere with the functionality of inadequately protected medical devices. Consult a physician or the manufacturer of the medical device to determine if it is adequately shielded from external RF energy, or if you have any questions.Switch off your phone in health care facilities when regulations posted in these areas instruct you to do so. Hospitals or health care facilities may be using equipment that could be sensitive to RF energy.■Electronic devicesMost modern electronic equipment is shielded from radio frequency (RF) signals. However, certain electronic equipment may not be shielded against the RF signals emanating from your wireless phone.■Posted facilitiesSwitch your phone off in any facility where posted notices so require.■Potentially explosive atmospheresSwitch off your phone when in any area with a potentially explosive atmosphere and obey all signs and instructions. Sparks in such areas could cause an explosion or fire resulting in bodily injury or even death. Users are advised to switch off the phone when at a refuelling point (service station). Users are reminded of the need to observe restrictions regarding the use of radio equipment in fuel depots (fuel storage and distribution areas), chemical plants, or where blasting operations are in progress.Areas with a potentially explosive atmosphere are often but not always clearly marked. They include below deck on boats, chemical transfer/storage facilities, vehicles using liquefied petroleum gas (such as propane or butane), areas where the air contains chemicals or particles, such as grain, dust or metal powders, and any other area where you would be advised to turn off your vehicle engine.FCC_Layout.fm Page 96 Wednesday, August 7, 2002 1:34 PM
97■VehiclesOnly qualified personnel should install or service the phone in a vehicle. Faulty installation or service may be dangerous and invalidate the warranty. RF signals may affect improperly installed or inadequately shielded electronic systems in motor vehicles (for example, electronic fuel injection systems, electronic anti-skid (anti-lock) braking systems, electronic speed control systems, air bag systems). Check with the manufacturer or its representative regarding your vehicle.You should also consult the manufacturer of any equipment that has been added to your vehicle. Ensure all wireless phone equipment in your vehicle is mounted and operating properly. Don’t carry or store flammable liquids, gases or explosive materials in the same compartment as the phone or its accessories. For vehicles equipped with an air bag, remember that an air bag inflates with great force. Don’t place any objects in the area over the air bag or in the air bag deployment area. If in-vehicle wireless equipment is improperly installed and the air bag inflates, serious injury could result.■AircraftFCC regulations prohibit using your phone while in the air.Switch off your phone before boarding an aircraft. The use of wireless telephones in an aircraft may be dangerous to the operation of the aircraft, disrupt the wireless telephone network, and may be illegal. Failure to observe these instructions may lead to suspension or denial of telephone services to the offender, legal action, or both.■Emergency callsImportant: This phone, like any wireless phone, operates using radio signals, wireless, and landline networks as well as userprogrammed functions. Because of this, connections in all conditions cannot be guaranteed.Therefore you should never rely solely upon any wireless phone for essential communications (for example, medical emergencies).FCC_Layout.fm Page 97 Wednesday, August 7, 2002 1:34 PM
98MAKING AN EMERGENCY CALLNote: Some networks may require that a valid SIM card be properly inserted in the phone. Official emergency numbers vary by location (for example, 911 or other official emergency number).1. If the phone is not on, switch it on. Check for adequate signal strength.2. Press as many times as needed (for example, to exit a call, to exit a menu, etc.) to clear the display and ready the phone for calls.3. Enter the emergency number for your present location (for example, 911 or other official emergency number). Emergency numbers vary by location.4. Press .If certain features are in use, you may first need to turn those features off before you can make an emergency call. Consult this user guide and your local cellular service provider.When making an emergency call, remember to provide all information as accurately and clearly as possible. Remember that your wireless phone may be the only means of communication at the scene of an accident - don’t cut off the call until given permission to do so.■CERTIFICATION INFORMATION (SAR)THIS MODEL PHONE MEETS THE GOVERNMENT'S REQUIREMENTS FOR EXPOSURE TO RADIO WAVES.Your wireless phone is a radio transmitter and receiver. It is designed and manufactured not to exceed the emission limits for exposure to radio frequency (RF) energy set by the Federal Communications Commission of the U.S. Government. These limits are part of comprehensive guidelines and establish permitted levels of RF energy for the general population. The guidelines are based on standards that were developed by independent scientific organizations through periodic and thorough evaluation of scientific studies. The standards include a substantial safety margin designed to assure the safety of all persons, regardless of age and health. The exposure standard for wireless mobile phones employs a unit of measurement known as the Specific Absorption Rate, or SAR. The SAR limit set by the FCC is 1.6W/kg.* Tests for SAR are conducted using standard operating positions accepted by the FCC with the phone transmitting at its highest certified power level in all tested frequency bands. Although the SAR is determined at the highest FCC_Layout.fm Page 98 Monday, February 10, 2003 4:10 PM
99certified power level, the actual SAR level of the phone while operating can be well below the maximum value. This is because the phone is designed to operate at multiple power levels so as to use only the power required to reach the network. In general, the closer you are to a wireless base station antenna, the lower the power output. Before a phone model is available for sale to the public, it must be tested and certified to the FCC that it does not exceed the limit established by the government-adopted requirement for safe exposure. The tests are performed in positions and locations (for example, at the ear and worn on the body) as required by the FCC for each model. The highest SAR value for this model phone as reported to the FCC when tested for use at the ear is 0.88 W/kg and when worn on the body, as described in this user guide, is 1.21 W/kg. (Body-worn measurements differ among phone models, depending upon available accessories and FCC requirements). While there may be differences between the SAR levels of various phones and at various positions, they all meet the government requirement. The FCC has granted an Equipment Authorization for this model phone with all reported SAR levels evaluated as in compliance with the FCC RF exposure guidelines. SAR information on this model phone is on file with the FCC and can be found under the Display Grant section of http://www.fcc.gov/oet/fccid after searching on FCC ID PPINPL-2 or PPINPL-2H. The FCC ID of your phone can be found on the type label under the battery.For body worn operation, this phone has been tested and meets the FCC RF exposure guidelines for use with an accessory that contains no metal and that positions the handset a minimum of 5/8 inch (1.5 cm) from the body. Use of other accessories may not ensure compliance with FCC RF exposure guidelines. If you do not use a body worn accessory, and are not holding the phone at the ear, position the handset a minimum of 5/8 inch (1.5 cm) from your body when the phone is switched on.*In the United States and Canada, the SAR limit for mobile phones used by the public is 1.6 watts/kilogram (W/kg) averaged over one gram of tissue. The standard incorporates a substantial margin of safety to give additional protection for the public and to account for any variations in measurements. SAR values may vary depending on national reporting equirements and the network band. For SAR information in other regions please look under product information at www.nokia.com. For body worn operation, this phone has been tested and meets the FCC RF exposure guidelines when used with the Nokia accessories supplied or designated for this product. Use of other accessories may not ensure compliance with FCC RF exposure guidelines.FCC_Layout.fm Page 99 Monday, February 10, 2003 4:10 PM
100APPENDIX■A message from the CTIA© 2001 Cellular Telecommunications & Internet Association. All Rights Reserved.1250 Connecticut Avenue, NW Suite 800, Washington, DC 20036.Phone: (202) 785-0081Safety is the most important call you will ever make.A Guide to Safe and Responsible Wireless Phone UseTens of millions of people in the u.s. today take advantage of the unique combination of convenience, safety and value delivered by the wireless telephone. Quite simply, the wireless phone gives people the powerful ability to communicate by voice--almost anywhere, anytime--with the boss, with a client, with the kids, with emergency personnel or even with the police. each year, americans make billions of calls from their wireless phones, and the numbers are rapidly growing.But an important responsibility accompanies those benefits, one that every wireless phone user must uphold. When driving a car, driving is your first responsibility. A wireless phone can be an invaluable tool, but good judgment must be exercised at all times while driving a motor vehicle--whether on the phone or not.The basic lessons are ones we all learned as teenagers. Driving requires alertness, caution and courtesy. It requires a heavy dose of basic common sense---keep your head up, keep your eyes on the road, check your mirrors frequently and watch out for other drivers. It requires obeying all traffic signs and signals and staying within the speed limit. It means using seatbelts and requiring other passengers to do the same.But with wireless phone use, driving safely means a little more. This brochure is a call to wireless phone users everywhere to make safety their first priority when behind the wheel of a car. Wireless telecommunications is keeping us in touch, simplifying our lives, protecting us in emergencies and providing opportunities to help others in need.FCC_Layout.fm Page 100 Wednesday, August 7, 2002 1:34 PM
101When it comes to the use of wireless phones, safety is your most important call.Wireless Phone “Safety Tips”Below are safety tips to follow while driving and using a wireless phone which should be easy to remember.1. Get to know your wireless phone and its features such as speed dial and redial. Carefully read your instruction manual and learn to take advantage of valuable features most phones offer, including automatic redial and memory. Also, work to memorize the phone keypad so you can use the speed dial function without taking your attention off the road.2. When available, use a hands free device. A number of hands free wireless phone accessories are readily available today. Whether you choose an installed mounted device for your wireless phone or a speaker phone accessory, take advantage of these devices if available to you.3. Position your wireless phone within easy reach. Make sure you place your wireless phone within easy reach and where you can grab it without removing your eyes from the road. If you get an incoming call at an inconvenient time, if possible, let your voice mail answer it for you.4. Suspend conversations during hazardous driving conditions or situations. Let the person you are speaking with know you are driving; if necessary, suspend the call in heavy traffic or hazardous weather conditions. Rain, sleet, snow and ice can be hazardous, but so is heavy traffic. As a driver, your first responsibility is to pay attention to the road.5. Do not take notes or look up phone numbers while driving. If you are reading an address book or business card, or writing a “to do” list while driving a car, you are not watching where you are going. It’s common sense. Don’t get caught in a dangerous situation because you are reading or writing and not paying attention to the road or nearby vehicles.6. Dial sensibly and assess the traffic; if possible, place calls when you are not moving or before pulling into traffic. Try to plan your calls FCC_Layout.fm Page 101 Wednesday, August 7, 2002 1:34 PM
102before you begin your trip or attempt to coincide your calls with times you may be stopped at a stop sign, red light or otherwise stationary. But if you need to dial while driving, follow this simple tip--dial only a few numbers, check the road and your mirrors, then continue.7. Do not engage in stressful or emotional conversations that may be distracting. Stressful or emotional conversations and driving do not mix--they are distracting and even dangerous when you are behind the wheel of a car. Make people you are talking with aware you are driving and if necessary, suspend conversations which have the potential to divert your attention from the road.8. Use your wireless phone to call for help. Your wireless phone is one of the greatest tools you can own to protect yourself and your family in dangerous situations--with your phone at your side, help is only three numbers away. Dial 9-1-1 or other local emergency number in the case of fire, traffic accident, road hazard or medical emergency. Remember, it is a free call on your wireless phone!9. Use your wireless phone to help others in emergencies. Your wireless phone provides you a perfect opportunity to be a “Good Samaritan” in your community. If you see an auto accident, crime in progress or other serious emergency where lives are in danger, call 9-1-1 or other local emergency number, as you would want others to do for you.10. Call roadside assistance or a special wireless non-emergency assistance number when necessary. Certain situations you encounter while driving may require attention, but are not urgent enough to merit a call for emergency services. But you still can use your wireless phone to lend a hand. If you see a broken-down vehicle posing no serious hazard, a broken traffic signal, a minor traffic accident where no one appears injured or a vehicle you know to be stolen, call roadside assistance or other special non-emergency wireless number.Careless, distracted individuals and people driving irresponsibly represent a hazard to everyone on the road. Since 1984, the Cellular Telecommunications Industry Association and the wireless industry have conducted educational outreach to inform wireless phone users of FCC_Layout.fm Page 102 Wednesday, August 7, 2002 1:34 PM
103their responsibilities as safe drivers and good citizens. As we approach a new century, more and more of us will take advantage of the benefits of wireless telephones. And, as we take to the roads, we all have a responsibility to drive safely.The wireless industry reminds you to use your phone safely when driving.For more information, please call 1-888-901-SAFE.For updates: http://www.wow-com.com/consumer/issues/driving/articles.cfm?ID=85© 2001 Cellular Telecommunications & Internet Association.All Rights Reserved.1250Connecticut Avenue, NW Suite 800, Washington, DC 20036. Phone: (202) 785-0081■A message from the U.S. Food and Drug Administration1. Do wireless phones pose a health hazard?The available scientific evidence does not show that any health problems are associated with using wireless phones. There is no proof, however, that wireless phones are absolutely safe. Wireless phones emit low levels of radiofrequency energy (RF) in the microwave range while being used. They also emit very low levels of RF when in the stand-by mode. Whereas high levels of RF can produce health effects (by heating tissue), exposure to low level RF that does not produce heating effects causes no known adverse health effects. Many studies of low level RF exposures have not found any biological effects. Some studies have suggested that some biological effects may occur, but such findings have not been confirmed by additional research. In some cases, other researchers have had difficulty in reproducing those studies, or in determining the reasons for inconsistent results.2. What is FDA's role concerning the safety of wireless phones?Under the law, FDA does not review the safety of radiation-emitting consumer products such as wireless phones before they can be sold, as it does with new drugs or medical devices. However, the agency has FCC_Layout.fm Page 103 Wednesday, August 7, 2002 1:34 PM
104authority to take action if wireless phones are shown to emit radiofrequency energy (RF) at a level that is hazardous to the user. In such a case, FDA could require the manufacturers of wireless phones to notify users of the health hazard and to repair, replace or recall the phones so that the hazard no longer exists.Although the existing scientific data do not justify FDA regulatory actions, FDA has urged the wireless phone industry to take a number of steps, including the following:• Support needed research into possible biological effects of RF of the type emitted by wireless phones;• Design wireless phones in a way that minimizes any RF exposure to the user that is not necessary for device function; and• Cooperate in providing users of wireless phones with the best possible information on possible effects of wireless phone use on human health.FDA belongs to an interagency working group of the federal agencies that have responsibility for different aspects of RF safety to ensure coordinated efforts at the federal level. The following agencies belong to this working group:• National Institute for Occupational Safety and Health• Environmental Protection Agency• Federal Communications Commission• Occupational Safety and Health Administration• National Telecommunications and Information AdministrationThe National Institutes of Health participates in some interagency working group activities, as well.FDA shares regulatory responsibilities for wireless phones with the Federal Communications Commission (FCC). All phones that are sold in the United States must comply with FCC safety guidelines that limit RF exposure. FCC relies on FDA and other health agencies for safety questions about wireless phones.FCC also regulates the base stations that the wireless phone networks rely upon. While these base stations operate at higher power than do the wireless phones themselves, the RF exposures that people get from these base stations are typically thousands of times lower than those FCC_Layout.fm Page 104 Wednesday, August 7, 2002 1:34 PM
105they can get from wireless phones. Base stations are thus not the subject of the safety questions discussed in this document.3. What kinds of phones are the subject of this update?The term wireless phone refers here to hand-held wireless phones with built-in antennas, often called cell mobile or PCS phones. These types of wireless phones can expose the user to measurable radiofrequency energy (RF) because of the short distance between the phone and the user’s head. These RF exposures are limited by Federal Communications Commission safety guidelines that were developed with the advice of FDA and other federal health and safety agencies. When the phone is located at greater distances from the user, the exposure to RF is drastically lower because a person's RF exposure decreases rapidly with increasing distance from the source. The so-called cordless phones; which have a base unit connected to the telephone wiring in a house, typically operate at far lower power levels, and thus produce RF exposures far below the FCC safety limits.4. What are the results of the research done already?The research done thus far has produced conflicting results, and many studies have suffered from flaws in their research methods. Animal experiments investigating the effects of radiofrequency energy (RF) exposures characteristic of wireless phones have yielded conflicting results that often cannot be repeated in other laboratories. A few animal studies, however, have suggested that low levels of RF could accelerate the development of cancer in laboratory animals. However, many of the studies that showed increased tumor development used animals that had been genetically engineered or treated with cancer-causing chemicals so as to be pre-disposed to develop cancer in the absence of RF exposure. Other studies exposed the animals to RF for up to 22 hours per day. These conditions are not similar to the conditions under which people use wireless phones, so we don’t know with certainty what the results of such studies mean for human health.Three large epidemiology studies have been published since December 2000. Between them, the studies investigated any possible association between the use of wireless phones and primary brain cancer, glioma, meningioma, or acoustic neuroma, tumors of the brain or salivary gland, leukemia, or other cancers. None of the studies demonstrated the FCC_Layout.fm Page 105 Wednesday, August 7, 2002 1:34 PM
106existence of any harmful health effects from wireless phone RF exposures. However, none of the studies can answer questions about long-term exposures, since the average period of phone use in these studies was around three years.5. What research is needed to decide whether RF exposure from wireless phones poses a health risk?A combination of laboratory studies and epidemiological studies of people actually using wireless phones would provide some of the data that are needed. Lifetime animal exposure studies could be completed in a few years. However, very large numbers of animals would be needed to provide reliable proof of a cancer promoting effect if one exists. Epidemiological studies can provide data that is directly applicable to human populations, but 10 or more years follow-up may be needed to provide answers about some health effects, such as cancer. This is because the interval between the time of exposure to a cancer-causing agent and the time tumors develop - if they do - may be many, many years. The interpretation of epidemiological studies is hampered by difficulties in measuring actual RF exposure during day-to-day use of wireless phones. Many factors affect this measurement, such as the angle at which the phone is held, or which model of phone is used.6. What is FDA doing to find out more about the possible health effects of wireless phone RF?FDA is working with the U.S. National Toxicology Program and with groups of investigators around the world to ensure that high priority animal studies are conducted to address important questions about the effects of exposure to radiofrequency energy (RF). FDA has been a leading participant in the World Health Organization International Electromagnetic Fields (EMF) Project since its inception in 1996. An influential result of this work has been the development of a detailed agenda of research needs that has driven the establishment of new research programs around the world. The Project has also helped develop a series of public information documents on EMF issues.FDA and the Cellular Telecommunications & Internet Association (CTIA) have a formal Cooperative Research and Development Agreement (CRADA) to do research on wireless phone safety. FDA provides the scientific oversight, obtaining input from experts in government, FCC_Layout.fm Page 106 Wednesday, August 7, 2002 1:34 PM
107industry, and academic organizations. CTIA-funded research is conducted through contracts to independent investigators. The initial research will include both laboratory studies and studies of wireless phone users. The CRADA will also include a broad assessment of additional research needs in the context of the latest research developments around the world.7. How can I find out how much radiofrequency energy exposure I can get by using my wireless phone?All phones sold in the United States must comply with Federal Communications Commission (FCC) guidelines that limit radiofrequency energy (RF) exposures. FCC established these guidelines in consultation with FDA and the other federal health and safety agencies. The FCC limit for RF exposure from wireless telephones is set at a Specific Absorption Rate (SAR) of 1.6 watts per kilogram (1.6 W/kg). The FCC limit is consistent with the safety standards developed by the Institute of Electrical and Electronic Engineering (IEEE) and the National Council on Radiation Protection and Measurement. The exposure limit takes into consideration the body’s ability to remove heat from the tissues that absorb energy from the wireless phone and is set well below levels known to have effects.Manufacturers of wireless phones must report the RF exposure level for each model of phone to the FCC. The FCC website (http://www.fcc.gov/oet/rfsafety) gives directions for locating the FCC identification number on your phone so you can find your phone’s RF exposure level in the online listing.8. What has FDA done to measure the radiofrequency energy coming from wireless phones?The Institute of Electrical and Electronic Engineers (IEEE) is developing a technical standard for measuring the radiofrequency energy (RF) exposure from wireless phones and other wireless handsets with the participation and leadership of FDA scientists and engineers. The standard, Recommended Practice for Determining the Spatial-Peak Specific Absorption Rate (SAR) in the Human Body Due to Wireless Communications Devices: Experimental Techniques, sets forth the first consistent test methodology for measuring the rate at which RF is deposited in the heads of wireless phone users. The test method uses a FCC_Layout.fm Page 107 Wednesday, August 7, 2002 1:34 PM
108tissue-simulating model of the human head. Standardized SAR test methodology is expected to greatly improve the consistency of measurements made at different laboratories on the same phone. SAR is the measurement of the amount of energy absorbed in tissue, either by the whole body or a small part of the body. It is measured in watts/kg (or milliwatts/g) of matter. This measurement is used to determine whether a wireless phone complies with safety guidelines.9. What steps can I take to reduce my exposure to radiofrequency energy from my wireless phone?If there is a risk from these products--and at this point we do not know that there is--it is probably very small. But if you are concerned about avoiding even potential risks, you can take a few simple steps to minimize your exposure to radiofrequency energy (RF). Since time is a key factor in how much exposure a person receives, reducing the amount of time spent using a wireless phone will reduce RF exposure.If you must conduct extended conversations by wireless phone every day, you could place more distance between your body and the source of the RF, since the exposure level drops off dramatically with distance. For example, you could use a headset and carry the wireless phone away from your body or use a wireless phone connected to a remote antenna. Again, the scientific data do not demonstrate that wireless phones are harmful. But if you are concerned about the RF exposure from these products, you can use measures like those described above to reduce your RF exposure from wireless phone use.10. What about children using wireless phones?The scientific evidence does not show a danger to users of wireless phones, including children and teenagers. If you want to take steps to lower exposure to radiofrequency energy (RF), the measures described above would apply to children and teenagers using wireless phones. Reducing the time of wireless phone use and increasing the distance between the user and the RF source will reduce RF exposure.Some groups sponsored by other national governments have advised that children be discouraged from using wireless phones at all. For example, the government in the United Kingdom distributed leaflets containing such a recommendation in December 2000. They noted that no evidence exists that using a wireless phone causes brain tumors or other ill FCC_Layout.fm Page 108 Wednesday, August 7, 2002 1:34 PM
109effects. Their recommendation to limit wireless phone use by children was strictly precautionary; it was not based on scientific evidence that any health hazard exists.11. What about wireless phone interference with medical equipment?Radiofrequency energy (RF) from wireless phones can interact with some electronic devices. For this reason, FDA helped develop a detailed test method to measure electromagnetic interference (EMI) of implanted cardiac pacemakers and defibrillators from wireless telephones. This test method is now part of a standard sponsored by the Association for the Advancement of Medical instrumentation (AAMI). The final draft, a joint effort by FDA, medical device manufacturers, and many other groups, was completed in late 2000. This standard will allow manufacturers to ensure that cardiac pacemakers and defibrillators are safe from wireless phone EMI. FDA has tested hearing aids for interference from handheld wireless phones and helped develop a voluntary standard sponsored by the Institute of Electrical and Electronic Engineers (IEEE). This standard specifies test methods and performance requirements for hearing aids and wireless phones so that no interference occurs when a person uses a compatible phone and a accompanied hearing aid at the same time. This standard was approved by the IEEE in 2000.FDA continues to monitor the use of wireless phones for possible interactions with other medical devices. Should harmful interference be found to occur, FDA will conduct testing to assess the interference and work to resolve the problem.12. Where can I find additional information?For additional information, please refer to the following resources:FDA web page on wireless phoneshttp://www.fda.gov/cdrh/phones/index.htmlFederal Communications Commission (FCC) RF Safety Programhttp://www.fcc.gov/oet/rfsafetyInternational Commission on Non-Ionizing Radiation Protectionhttp://www.icnirp.deFCC_Layout.fm Page 109 Wednesday, August 7, 2002 1:34 PM
110World Health Organization (WHO) International EMF Projecthttp://www.who.int/emfNational Radiological Protection Board (UK)http://www.nrpb.org.uk/July 18, 2001 For updates: http://www.fda.gov/cdrh/phonesFCC_Layout.fm Page 110 Wednesday, August 7, 2002 1:34 PM

Navigation menu