Microsoft NPL-3 GSM/EGPRS Cellular Phone User Manual 6200 1 9356027

Microsoft Mobile Oy GSM/EGPRS Cellular Phone 6200 1 9356027

Manual

DRAFTNokia 6200 User Guide
DRAFTPhone notesMy Nokia information Notes Information sourceMy number Wireless service providerVoice mail number Wireless service providerProvider’s customer care Wireless service providerMessage center number Wireless service providerDefault recipient number (e-mail gateway number)Wireless service providerInternational Mobile Equipment Identifier (IMEI)Type label. Located on the back of your phone, beneath the battery.Model number 6200Phone type NPL-3
DRAFTThe wireless phone described in this guide is approved for use in GSM 850, 1800, and 1900 networks.LEGAL INFORMATIONPart No. 9356027, Issue No. 1Copyright ©2003 Nokia. All rights reserved.Nokia, Nokia 6200, Pop-Port, Nokia Connecting People, and the Nokia Original Accessories logos are trademarks or registered trademarks of Nokia Corporation. All other product and company names mentioned herein may be trademarks or tradenames of their respective owners.Printed in Canada 02/2003US Patent No 5818437 and other pending patents.T9 text input software Copyright «1999-2003. Tegic Communications, Inc. All rights reserved.Includes RSA BSAFE cryptographic or security protocol software from RSA Security. Java is a trademark of Sun Microsystems, Inc.The information contained in this user guide was written for the Nokia 6200 phone. Nokia operates a policy of on-going development. Nokia reserves the right to make changes and improvements to any of the products described in this document without prior notice.UNDER NO CIRCUMSTANCES SHALL NOKIA BE RESPONSIBLE FOR ANY LOSS OF DATA OR INCOME OR ANY SPECIAL, INCIDENTAL, AND CONSEQUENTIAL OR INDIRECT DAMAGES HOWSOEVER CAUSED.THE CONTENTS OF THIS DOCUMENT ARE PROVIDED “AS IS.” EXCEPT AS REQUIRED BY APPLICABLE LAW, NO WARRANTIES OF ANY KIND, EITHER EXPRESS OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE, ARE MADE IN RELATION TO THE ACCURACY AND RELIABILITY OR CONTENTS OF THIS DOCUMENT. NOKIA RESERVES THE RIGHT TO REVISE THIS DOCUMENT OR WITHDRAW IT AT ANY TIME WITHOUT PRIOR NOTICE.EXPORT CONTROLSThis product contains commodities, technology or software exported from the United States in accordance with the Export Administration regulations. Diversion contrary to U.S. law is prohibited.
DRAFTFCC/INDUSTRY CANADA NOTICEYour phone may cause TV or radio interference (for example, when using a telephone in close proximity to receiving equipment). The FCC or Industry Canada can require you to stop using your telephone if such interference cannot be eliminated. If you require assistance, contact your local service facility. This device complies with part 15 of the FCC rules. Operation is subject to the condition that this device does not cause harmful interference.The term “IC:” before the certification/registration number only signifies that Industry Canada technical specifications were met.
DRAFTManufactured or sold under one or more following US Patents:4868846 5519885 5827082 5966378 6112099 62663304969192 5526366 5835889 5970059 6115617 62824365001372 5553125 5839101 5987137 6118775 62858885045973 5557639 584884 5991716 6121846 62926685101175 5565821 5845219 5991857 6122498 62952865212834 5570369 5857151 5999523 6128322 63080845230091 5581244 5862178 6005857 6128509 63106095233634 5597102 5870683 6011853 6138091 63110545241284 5625274 5887266 6014573 6140966 63141665241583 5640395 5889770 6018277 6144243 63244125266782 5664004 5892475 6026161 6144676 63472185311151 5664053 5898925 6028567 6148209 63567595 3111 7 9 5669069 5907823 6029128 6151485 63599045317283 5677620 5914690 6038238 6151507 63632595331638 5678224 5914796 6043760 6163609 63703625335362 5692032 5915440 6047196 6164547 63703905353328 5699406 5917868 6049796 6167248 63778035378935 5699482 5920826 6050415 6170073 63931215384782 5701392 5926138 6055439 6178535 64307215390223 5729534 5926769 6060193 6185295 64341335396657 5729541 5930233 6069923 61889095400949 5734683 5946651 6072787 61953385416435 5754976 5956332 6081534 61990355442521 5760568 5956625 6084962 62018765444816 5782646 5956633 6088746 62195605446364 5794142 5960354 6094587 62400765479476 5802465 5960389 6097964 62400795487084 5805084 5963901 6105784 62495845493255 5805301 5966374 6108553 6259312
DRAFT
DRAFT[ i ]Contents1 For your safety . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .12 Overview of functions . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3Multimedia messaging service (MMS). . . . . . . . . . . . . . . . . . . . . . . . . . . .3Polyphonic sound (MIDI). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3(E)GPRS. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3Speakerphone. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4JavaTM applications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4FM stereo radio . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .43 Welcome and quick guide . . . . . . . . . . . . . . . . . . . . . . . . . . 5Get the most out of this guide . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5Understand wireless network services . . . . . . . . . . . . . . . . . . . . . . . . . . . .6Register your phone . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6Learn about accessibility solutions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6Understand your phone. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7Get started with the Quick Guide . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .14Menu shortcuts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .15Get help . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .164 Basic operations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .18Switch your phone on or off. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .18Make and answer calls . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .18Options during a call. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .20Check the start screen. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .22Browse phone menus . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .24Set up your phone . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .295 Text entry . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .31Standard mode. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .31Predictive text input . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .326 Manage phone security . . . . . . . . . . . . . . . . . . . . . . . . . . .35Security levels . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .35Fixed dialing. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .36
DRAFT[ ii ]Access codes. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 387 Contacts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 42View the contacts list . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 42Save contacts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 43Copy contact list entries . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 471-touch dialing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 48Voice dialing. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 50View Info, Service, and Own numbers . . . . . . . . . . . . . . . . . . . . . . . . . . 538 Menu functions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 55Messages (Menu 1) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 55Tips for composing a message . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 57Text messages . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 57Picture messages . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 59E-mail . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 62Multimedia messages . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 63Voice messages . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 69Message options . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 72Organize messages with folders . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 73Delete messages. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 75Change text, e-mail, and picture message settings . . . . . . . . . . . . . . . 76Change multimedia message settings . . . . . . . . . . . . . . . . . . . . . . . . . . 78Call log (Menu 2) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 80Call log options . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 80View missed calls . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 81View received calls. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 81View dialed numbers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 82Delete call lists. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 82View call duration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 83Profiles (Menu 3) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 84Select a profile . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 84Customize a profile . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 84Set a timed profile . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 85
DRAFT[ iii ]Settings (Menu 4) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .87Right selection key settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .87Time and date settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .88Call settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .89Phone settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .93Display settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .97Tone settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .99Enhancement settings. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .99Security settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .102Restore factory settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .102Alarm clock (Menu 5) . . . . . . . . . . . . . . . . . . . . . . . . . . .103Set an alarm. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .103Turn off an alarm that has been set. . . . . . . . . . . . . . . . . . . . . . . . . . . .104Radio (Menu 6) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .105Turn the radio on and off . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .105Use the radio . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .105Save a radio channel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .106Gallery (Menu 7) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .107Open the gallery . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .107View folders . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .108Organizer (Menu 8) . . . . . . . . . . . . . . . . . . . . . . . . . . . . .109Calendar . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .109Send and receive calendar notes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .112Make a to-do list. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .114Games (Menu 9) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .116Launch a game. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .116Applications (Menu 10) . . . . . . . . . . . . . . . . . . . . . . . . . .118Launch an application. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .118Download applications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .119View application memory status . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .120
DRAFT[ iv ]Extras (Menu 11) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 121Use the calculator . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 121Use the currency converter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 122Voice recorder . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 123Voice commands . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 124Audible alerts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 126Connectivity (Menu 12) . . . . . . . . . . . . . . . . . . . . . . . . . 127Infrared . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 127(E)GPRS. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 129Synchronize . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 131Nokia PC Suite . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 135Services (Menu 13) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 136Notes on wireless Internet access . . . . . . . . . . . . . . . . . . . . . . . . . . . . 136Sign on to the wireless Internet . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 137Use browser options . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 137Navigate the wireless Internet . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 138Use bookmarks . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 140Security issues . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1409 Reference information. . . . . . . . . . . . . . . . . . . . . . . . . . . 142Battery statements . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 142Use proper care and maintenance . . . . . . . . . . . . . . . . . . . . . . . . . . . . 143Understand important safety information. . . . . . . . . . . . . . . . . . . . . . 144Emergency calls . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 147Certification information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 148Battery information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 150Enhancements . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 151Frequently asked questions. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 155Glossary . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 158Technical information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 160Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 161Appendix A (Message from the CTIA) . . . . . . . . . . . . . . . 167Appendix B (Message from the FDA) . . . . . . . . . . . . . . . . 171
DRAFT[ 1 ]1 For your safetyRead these simple guidelines. Breaking the rules may be dangerous or illegal. Further detailed information is given in this manual.Do not switch on the phone when wireless phone use is prohibited or when it may cause interference or danger.ROAD SAFETY COMES FIRSTDon't use a handheld phone while driving.INTERFERENCEAll wireless phones may get interference, which could affect performance.SWITCH OFF IN HOSPITALSFollow any regulations or rules. Switch the phone off near medical equipment.SWITCH OFF IN AIRCRAFTWireless devices can cause interference in aircraft.SWITCH OFF WHEN REFUELINGDon't use the phone at a refueling point. Don't use near fuel or chemicals.SWITCH OFF NEAR BLASTINGDon't use the phone where blasting is in progress. Observe restrictions, and follow any regulations or rules.USE SENSIBLYUse only in the normal position. Don't touch the antenna unnecessarily.QUALIFIED SERVICEOnly qualified personnel may install or repair phone equipment.
DRAFT[ 2 ]ENHANCEMENTS AND BATTERIESUse only approved enhancements and batteries. Do not connect incompatible products.WATER-RESISTANCEYour phone is not water-resistant. Keep it dry.BACKUP COPIESRemember to make backup copies of all important data.CONNECTING TO OTHER DEVICESWhen connecting to any other device, read its user guide for detailed safety instructions. Do not connect incompatible products.CALLINGEnsure the phone is switched on and in service. Enter the phone number, including the area code, then press h. To end a call, press i. To answer a call, press h.EMERGENCY CALLSEnsure the phone is switched on and in service. Press i as many times as needed (for example, to exit a call, to exit a menu) to clear the display. Enter the emergency number, then press h. Give your location. Do not end the call until told to do so.
DRAFT[ 3 ]Overview of functions2 Overview of functions • MULTIMEDIA MESSAGING SERVICE (MMS)Your phone is able to send and receive multimedia messages made up of text and pictures. You may also be able to receive polyphonic ringing tones. You can also save pictures and ringing tones to personalize your phone. See “Multimedia messages” on page 63 for more information.Important: This feature uses shared memory. Please see “Shared memory” on page 13 for more information. • POLYPHONIC SOUND (MIDI)Polyphonic sounds are used in ringing tones and message alert tones. They consist of several sound components played at the same time, like an actual melody through a speaker. Your phone has sound components from over 40 instruments that can be used for polyphonic sounds and the phone can play up to eight instruments simultaneously. The phone supports Scalable Polyphonic MIDI (SP-MIDI) format.You can receive polyphonic ringing tones via multimedia service (see “Read and reply to a multimedia message” on page 68), or download them via the gallery menu, see “Gallery (Menu 7)” on page 107 for more information. •(E)GPRSEnhanced General Packet Radio Service or (E)GPRS technology allows mobile phones to send and receive data over a mobile network.Applications such as xHTML, MMS, text messaging, and JavaTM use (E)GPRS. Your phone supports up to three simultaneous (E)GPRS connections. For more information, see “(E)GPRS” on page 129.Before using (E)GPRS technology:• Contact your network operator or service provider for availability and subscription to the (E)GPRS service.
DRAFT[ 4 ]• Save the (E)GPRS settings for each of the applications used over (E)GPRS.PRICING FOR (E)GPRS AND APPLICATIONSYour wireless provider may charge for (E)GPRS services. For more information on pricing, contact your wireless provider. •SPEAKERPHONEYou can use your phone as a speakerphone during a call. Do not hold the phone to your ear during speakerphone operation.• To activate the speakerphone, press Loudsp.• To deactivate the speakerphone during a call, press Handset.The speakerphone deactivates automatically when you end the call, attempt to make a new call, or when you connect a headset. •JAVATM APPLICATIONSYour phone supports JavaTM and includes some Java applications and games that have been specially designed for mobile phones. You may be able to download new applications and games to your phone from a PC with Java installer software or from some Mobile Internet services. See “Applications (Menu 10)” on page 118 for more information.Important: This feature uses shared memory. Please see “Shared memory” on page 13 for more information. • FM STEREO RADIOYour phone has an integrated FM stereo radio. You can listen to the radio through a headset or the handsfree speaker (with the headset attached). See “Radio (Menu 6)” on page 105 for more information.
DRAFT[ 5 ]Welcome and quick guide3 Welcome and quick guideCongratulations on your purchase of the Nokia 6200 mobile phone. Your phone provides many functions which are practical for daily use, such as a calendar, radio, alarm clock, calculator, voice recorder, and more. Your phone can also connect to a PC, laptop, or other device using the data cable or built-in IR port. • GET THE MOST OUT OF THIS GUIDEThe following tips can help you get the most from this guide as you learn to use your phone.Learn text conventionsThis user guide provides text clues to help make instructions clear and easy to follow. These clues are called conventions.Follow graphic cluesThis guide uses certain icons to alert you to important information.Tip: Indicates a shortcut or alternate method of doing something.Note: Explains a feature or points out an important concept. Important: Indicates critical information on using a feature.Caution: Warns when you may lose information.Convention What it meansbold The word or phrase appears on the phone display.bold and blue The text refers to an address on the world wide web.italics Indicates emphasis. Pay close attention to any information in italics.
DRAFT[ 6 ]Warning: Helps you avoid personal injury, damage to the phone, or property damage.Look for updatesFrom time to time, Nokia updates this guide to reflect changes. The latest version may be available at www.nokia.com/us. Also, an interactive tutorial may be available at www.nokiahowto.com. • UNDERSTAND WIRELESS NETWORK SERVICESA number of features in this guide are called network services. These are special services that you arrange through your wireless service provider. Before you can take advantage of any of these network services, you must subscribe to them through your wireless provider and obtain instructions for their use from your service provider. •REGISTER YOUR PHONEMake sure to register your phone at www.warranty.nokiausa.com or 1-888-NOKIA-2U (1-888-665-4228) so that we can serve your needs better if you should need to call the center or have your phone repaired.E-NewslettersWhen you register your phone, you can sign up for Nokia's e-newsletter, Nokia Connections, if you would like. You will receive tips and tricks on using your phone, enhancement information, and special offers. • LEARN ABOUT ACCESSIBILITY SOLUTIONSNokia is committed to making mobile phones easy to use for all individuals, including those with disabilities. Nokia maintains an internet site that is dedicated to accessibility solutions. For more information about phone features, enhancements, alternate format user guides, and other Nokia products designed with your needs in mind, visit the website at www.nokiaaccessibility.com or call 1-888-665-4228 for more information.
DRAFT[ 7 ]Welcome and quick guide • UNDERSTAND YOUR PHONEPower keyVolume keysLeft select key Right select keyEnd keyTalk keyDisplay screenEarpieceNumber keysIR PortMicrophonePop-PortTM connectorCharger jack4-way scroll keys+-Handsfree speaker
DRAFT[ 8 ]Use the antennaYour phone has a built-in antenna. As with any other radio transmitting device, avoid touching the antenna unnecessarily when the phone is switched on. Contact with the antenna affects call quality and may cause the phone to operate at a higher power level than otherwise needed. Not touching the antenna area during a phone call optimizes the antenna performance and the talk time of your phone.Use the batteryCHARGE THE BATTERY1Plug the charger transformer in to a standard ac outlet.2Insert the charger output jack into the round connector at the bottom end of the phone.After a few seconds, the battery indicator in the display starts to scroll from bottom to top. If the battery is completely flat, it may take a few minutes before the charging indicator appears on the display or any calls can be made.Tip: You can use the phone while the charger is connected.IMPORTANT BATTERY INFORMATIONImportant: Your phone is powered by a rechargeable battery.Use only batteries approved by Nokia and recharge your battery only with the chargers approved by Nokia. Never use any charger or battery which is damaged.The battery can be charged and discharged hundreds of times but it will eventually wear out. When the operating time (talk-time and standby time) is noticeably shorter than normal, it is time to buy a new battery.
DRAFT[ 9 ]Welcome and quick guidePROLONG THE BATTERYUse the following guidelines to obtain the best performance from your battery:• With your phone turned off, charge your new battery for three hours before its first use. Use the battery until it is fully discharged. Repeat this procedure twice for a total of three charging cycles.• Note that the full performance of a new battery is achieved only after two or three complete charge and discharge cycles. Battery operation time may be less than the estimated times during the first charges. This condition is normal.• You can use your phone while the battery is charging. However, if the battery is completely empty, it may need to recharge a few minutes before you can make or receive calls or the battery indicator appears.• After the first charge, you can make and receive calls during the charging cycle, but the calls interrupt the charge. When the phone call ends, the charge will resume.• The bars on the screen stop scrolling and remain constant when the phone is fully charged. If you leave the phone connected to the charger, the battery receives an additional charge. If you switch the phone on when charging is complete, the message Battery full momentarily appears in the display.Note: The battery will accept a “trickle charge" for an additional two hours.
DRAFT[ 10 ]REPLACE THE BATTERYYou will need to remove the existing battery if you want to replace the battery or insert the SIM card. Make sure the phone has been turned off for 10 seconds before removing the battery.REMOVE THE BACK COVER1With the back of the phone facing you, push down on the back cover release button.2Slide the back cover toward the bottom of the phone and remove.REMOVE THE BATTERY3After you have removed the back cover, insert your finger into the finger grip and lift the battery from its compartment.Install the SIM cardThe SIM card and its contacts can easily be damaged by scratches or bending, so be careful when handling, inserting, or removing the card.Before installing the SIM card, always make sure that the phone is switched off and that you have removed the cover and battery.Warning: Keep all SIM cards out of reach of small children.1Slide the SIM card holder toward the bottom end of the phone until it unlocks.1231
DRAFT[ 11 ]Welcome and quick guide2Swing the SIM card holder open.3Insert the SIM card into the holder (beveled corner last) with the gold contacts facing toward the top end of the phone.4Close the SIM card holder.5Slide the SIM card holder toward the top end of the phone until it locks into place.INSTALL THE BATTERYThe SIM card must be installed before installing the battery.1Position the battery so the gold contacts match up with those on the phone. The battery label should be facing away from the phone.2Insert the battery, contact end first into the battery slot.2 345
DRAFT[ 12 ]3Snap the other end of the battery into place.REPLACE THE BACK COVER4Slide the back cover toward the top of the phone until you hear a click and see the back cover release button.Use the selection and scroll keys Below each corner of the display are the selection keys. Press b when Menu appears above it to show the first of numerous menus. Page through the rest of the menus using the up and down scroll keys (d or g). Press c when Contacts appears above it to enter the contacts list.Tip: Press an up or down scroll key (d or g) from the Start screen to view any entries in your contacts list.Use four-way scrolling In features, such as the calendar monthly view, text messages, and special characters, you can move the cursor up and down as well as left and right. To move the cursor:Left, press f Up, press dDown, press gRight, press e Right selectLeftselect
DRAFT[ 13 ]Welcome and quick guideShared memory The following features in this phone may share memory: contacts, text and multimedia messages, images and ringing tones in gallery, calendar and to-do notes, Java games and applications, and voice recorder and commands. Using any such features may reduce the memory available for any features sharing memory. This is especially true with heavy use of any of the features (although some of these features may have a certain amount of memory specially allotted to them in addition to the amount of memory shared with other features). For example, saving many images, bookmarks, Java applications, or other features sharing memory may take all of the shared memory and your phone may display a message that the memory is full. In this case, delete some of the information or entries stored in the shared memory features before continuing.The following functions use shared memory that is dependent on the data quantity per item and shared memory available at a time in the Nokia 6200:• Contacts (up to 500 entries)• SMS messages (up to 150 text messages or 50 picture/concatenated messages)• Calendar notes (up to 250 entries)• To-do list (up to 30 entries)• Voice tags for commands (up to 5)• Voice tags for contacts (up to 10)The following features share a memory pool of 500 kB:• MMS (up to 5 max size 45 kB MMS messages)• MIDI ringing tones (31 preset, 20 removable, up to 50 average size 5 kB ringing tones)• Images (10 preset, up to 6 max size 45 kB images)• Java applications (3 preset, up to 4 max size 64 kB applications)
DRAFT[ 14 ] • GET STARTED WITH THE QUICK GUIDE Make a call Enter a phone number and press h.Answer a call Press h or press Options and select Answer call.Answer a call with a call waiting Press Answer or h.End a call Press i.Ignore a call Press Silence or i when your phone rings.Redial last number Press h twice.Adjust call volume Press up or down on the side volume key.Use the in-call menu While in a call, press Options.Use 1-touch dialing (if activated) Press and hold any key 2 through 9.Save a contact Enter a number, press Options, and select Save. Enter a name and press OK.Recall a contact Press Contacts and select Find or press g and select the name.Check voice mail Press and hold 1 or dial your voice mailbox number.Write and send a text message Press Menu 01-1-1. After a pause, write the message. Press Options, scroll to Send, press Select, enter the recipient’s number, press OK.Write and send an e-mail message Press Menu 01-1-2. After a pause, enter the recipient’s e-mail address. Press OK, enter a subject, and press OK. Write your e-mail message, press Options, scroll to Send e-mail, and press Select. Enter the e-mail server number if necessary, and press OK. The e-mail message is sent.Read a new message Press Show and, if necessary, press Select.Reply to a message Press Options, select Reply, write the reply, press Options, select Send, and press OK.Reply to an e-mail message Press Options, scroll to Reply, and press Select. Compose your message and press Options. Scroll to Sending options and press Select. Scroll to Sending profile and press Select. Highlight your e-mail profile and press Select. Press Options, Accept, enter the e-mail address, and press OK.Send a business card Recall a contact from the contacts list. Press Details, press Options, scroll to Send bus. card, scroll to Via text message, and press Select. Enter the recipient’s number or press Find to retrieve a number from the contacts list. Press OK. The business card is sent.
DRAFT[ 15 ]Welcome and quick guide • MENU SHORTCUTSTo access a menu or item, press Menu, then enter the numbers associated with the desired menu or item. For example, press Menu 2-1 (Call log > Missed calls) to view any missed calls.1 MESSAGES Text messages. . . . . . . . . . . . 01-1Multimedia msgs . . . . . . . . . 01-2Voice messages. . . . . . . . . . . 01-3Info messages . . . . . . . . . . . . 01-4Message settings . . . . . . . . . 01-5Service commands . . . . . . . . 01-62 CALL LOG Missed calls. . . . . . . . . . . . . . . 2-1Received calls . . . . . . . . . . . . . 2-2Dialed numbers. . . . . . . . . . . . 2-3Delete recent call lists . . . . . . 2-4Call timers. . . . . . . . . . . . . . . . 2-5GPRS data counter . . . . . . . . . 2-6GPRS connection timer . . . . . 2-73PROFILES Normal . . . . . . . . . . . . . . . . . . 3-1Silent . . . . . . . . . . . . . . . . . . . . 3-2Meeting. . . . . . . . . . . . . . . . . . 3-3Outdoor . . . . . . . . . . . . . . . . . . 3-4Pager . . . . . . . . . . . . . . . . . . . . 3-54 SETTINGS Right selection key settings. . 4-1Time and date settings. . . . . . 4-2Call settings . . . . . . . . . . . . . . 4-3Phone settings . . . . . . . . . . . . 4-4Display settings . . . . . . . . . . . 4-5Tone settings. . . . . . . . . . . . . . 4-6Enhancement settings . . . . . . 4-7Security settings. . . . . . . . . . . 4-8Restore factory settings. . . . . 4-95ALARM CLOCK 6RADIO 7 GALLERY 8ORGANIZER Calendar. . . . . . . . . . . . . . . . . . 8-1To-do list . . . . . . . . . . . . . . . . . 8-29GAMES 10 APPLICATIONS Select application . . . . . . . . . 10-1App. downloads. . . . . . . . . . . 10-2Memory . . . . . . . . . . . . . . . . . 10-311 EXTRAS Calculator . . . . . . . . . . . . . . . 11-1Voice recorder . . . . . . . . . . . . 11-2Voice commands . . . . . . . . . . 11-312 CONNECTIVITY Infrared . . . . . . . . . . . . . . . . . 12-1(E)GPRS . . . . . . . . . . . . . . . . . 12-2Synchronize . . . . . . . . . . . . . . 12-313 SERVICES Home . . . . . . . . . . . . . . . . . . . 13-1Bookmarks . . . . . . . . . . . . . . . 13-2Download links . . . . . . . . . . . 13-3Service inbox . . . . . . . . . . . . . 13-4Settings . . . . . . . . . . . . . . . . . 13-5 Go to address. . . . . . . . . . . . . 13-6Clear the cache . . . . . . . . . . . 13-7
DRAFT[ 16 ] •GET HELPFind your phone labelIf you need help, Nokia Customer Care is available for assistance. Before calling, however, please read “Frequently asked questions” on page 155.We also recommend that you write down the following information and have it available if you call. The information can be found on the type label, which is located on the back of the phone, beneath the battery.• The International Mobile Equipment Identifier (IMEI)• We also ask that you write down your zip code.Contact NokiaPlease have your phone or enhancement with you when contacting any of the numbers below.Nokia Customer Care Center, USA Customer Interaction Center, CanadaNokia Mobile Phones7725 Woodland Center Boulevard Suite #150Tampa, Florida 33614Tel: 1-888-NOKIA-2U (1-888-665-4228)Fax: 1-813-249-9619For TTY users: 1-800-24-NOKIA (1-800-246-6542)Nokia Products Ltd.601 Westney Road SouthAjax, Ontario L1S 4N7Tel: 1-888-22-NOKIA (1-888-226-6542)Fax: 1-905-427-1070Web site: www.nokia.ca Type label
DRAFT[ 17 ]Welcome and quick guideContact your service providerTo use the network services available in your phone, you will need to sign up with a wireless provider. In many cases, the wireless provider will make available descriptions of their services and instructions for using features such as:• Voice mail and voice privacy• Call waiting, call forwarding, and caller ID•Messaging• News and information services• Selected Internet servicesWireless providers may differ in their support of features. Before you sign up, make sure a wireless provider supports the features that you need.
DRAFT[ 18 ]4 Basic operations • SWITCH YOUR PHONE ON OR OFFWarning: Do not switch the phone on when wireless phone use is prohibited or when it may cause interference or danger.1To turn your phone on or off, press and hold the power key (a) on top of the phone for at least 4 seconds until the display light comes on.If the phone displays Insert SIM card even though the SIM card is properly inserted, or SIM card not supported, contact your wireless provider.2Enter the PIN code if necessary and press OK.3Enter the security code if necessary and press OK.Note: If the language that appears in your display is not correct, see “Set the display language” on page 93 for information on changing your phone’s display language. • MAKE AND ANSWER CALLSNote: Your phone must be switched on to use this function. Do not switch the phone on when wireless phone use is prohibited or when it may cause interference or danger.Use the keypad1Enter the phone number (including the area code) and press h.• To delete a character to the left of the cursor, press Clear.2Press i to end the call or to cancel the call attempt.Use the contacts list1At the Start screen, press d or g and scroll to the entry you wish to view.
DRAFT[ 19 ]Basic operations2Press h to make the call or press Details to view details of the entry.Tip: To quickly search the list of entries in your contacts list, press any key in which the letters match the first letter of the name for which you are searching.Answer or reject an incoming call•Press h to answer the call.•Press i to reject the call; the call is diverted to your voice mail if you have activated call forwarding to your voice mailbox number (see “Call forwarding” on page 89 for details).If you press c to Silence the call, only the ringing tone is muted. You can then either answer or reject the incoming call.Tip: If the HDB-4 or HDS-3 headset is connected, you can answer or end a call by pressing the key on the headset.Answer a call with the keypad lockedTo answer a call with Keyguard on, simply press h. During the call, all features function as normal. When you end or reject the call, the keypad automatically relocks. For more information on Keyguard, see “Lock the keypad (Keyguard)” on page 35.Note: When the phone is locked, calls may be possible to the emergency number programmed into your phone (for example, 911 or other official emergency number). Key in the emergency number and press h. The number is displayed only after you have keyed in its last digit. Redial the last number1At the Start screen, press h to display the last 20 numbers dialed. 2Press h to redial the last number, or scroll to the number (or name) you wish to redial and press h.
DRAFT[ 20 ]Adjust the earpiece volume• To increase the volume of a call, press the volume up key on the left side of the phone.• To decrease the volume of a call, press the volume down key on the left side of the phone. When adjusting the volume, a bar chart appears in the display indicating the volume level.Make a conference callConference calling is a network service that allows up to six persons to take part in a conference call.1Make a call to the first participant.2To call a new participant, press Options, scroll to New call, and press Select.3Enter the phone number of the new participant (or press Find to retrieve a number from your contacts list) and press Call. The first call is put on hold.4When the new call picks up, press Options, scroll to Conference, and press Select to connect the calls.5To add a new participant to the call, repeat steps 2 through 4.HAVE A PRIVATE CONVERSATION WITH ONE OF THE PARTICIPANTS:6Press Options, select Private, and select the desired participant. Rejoin the conference call as described in step 4.7To end the conference call, press i. • OPTIONS DURING A CALLMany of the options that you can use during a call are network services.1Press Options during a call to display those in the following table: V o l u m e key
DRAFT[ 21 ]Basic operationsOption FunctionMute Mute your voice; you can hear the other party but they can not hear you.Unmute Return to normal from mute status.End call End the call.End all calls End all calls within a conference call.Phone book Open the phone book menu.Menu Display the main menus.Hold Place the current call on hold.Unhold Remove the current call from hold status.New call Place a new call; the first call is put on hold.Conference Call another party and invite them into the call.Private Have a private conversation with one participant in a conference call.Answer Answer another incoming call.Reject Reject a call; the calling party receives a busy signal.Loudspeaker Enable the handsfree feature in your phone.Handset Disable handsfree and return to normal use (earpiece).Touch tones Send touch tones generated by your phone keypad.Swap Switch between the active call and the call on hold.Lock keypad Lock the keypad to prevent accidental key-presses.Record Voice recorder records an active phone conversation.
DRAFT[ 22 ]2Scroll to an option and press Select to activate the option or enter its submenu.3Press Swap to switch between the active call and the call on hold, press Transfer to connect a call on hold, and press i to disconnect yourself from all calls. • CHECK THE START SCREENThe Start screen is “home base” and indicates your phone is in idle mode.What’s on the Start screenHOME Your wireless provider’s name may appear hereSignal strength A higher bar indicates a stronger network signal.Battery level A higher bar indicates more power in the battery. b Left selection key; press this key when Menu is on the Start screen to enter the menu list. c Right selection key; press this key when Contacts is on the Start screen to enter the contacts list. If you have modified the right selection key settings in your phone, Go to appears in the display. d or g Scroll keys; press either of these keys at the Start screen to display any entries in your contacts list.Battery levelContactsSignal strengthMenu
DRAFT[ 23 ]Basic operationsUnderstand indicators and iconsIcon Indicates...You have one or more text or picture messages. See “Reply to a message or e-mail” on page 63.You have one or more multimedia messages. See “Read and reply to a multimedia message” on page 68.You have one or more voice messages. See “Voice messages” on page 69.Your phone’s keypad is locked. See “Lock the keypad (Keyguard)” on page 35.Your phone is set to the Silent profile. See “Profiles (Menu 3)” on page 84.The alarm clock is set to On. See “Alarm clock (Menu 5)” on page 103.An (E)GPRS dial-up connection is established. See “(E)GPRS dial-up connections” on page 129.The (E)GPRS connection is not currently active. See “(E)GPRS dial-up connections” on page 129.You have an incoming or outgoing call during a (E)GPRS dial-up connection. (E)GPRS is suspended. IR connection indicator. See “Infrared” on page 127Forward all voice calls. All calls are forwarded to another number. If you have two phone lines, the indicator for line 1 is and for line 2 .If you have two phone lines, indicates that you are on the 2nd phone line. See “Phone settings” on page 93.
DRAFT[ 24 ] • BROWSE PHONE MENUSYour phone features are grouped according to function and are accessed through the main menus. Each main menu contains submenus and lists from which you can select or view items and customize phone features. You can access these menus and submenus by using the scroll method or by using a shortcut.Note: Some features may not be available, depending on your network. For more information, contact your wireless provider.Use the scroll method1At the Start screen, press Menu, then use the up and down scroll keys(d or g) to scroll through the main menus.As you scroll through the menus, the menu number appears in the upper right corner of the display. Below the menu number is a scroll bar with a tab. The tab moves up or down as you scroll through the menus, providing a visual representation of your current position in the menu structure.Integrated handsfree is active. See “Speakerphone” on page 4.Calls are limited to a closed user group. See “Closed user groups” on page 38.The timed profile is selected. See “Profiles (Menu 3)” on page 84. or A headset or loopset is connected to the phone.The phone is connected to a carkit.Icon Indicates...Menunumber Scroll barwith tab
DRAFT[ 25 ]Basic operationsWhen you arrive at a menu:•Press Select (b) to access submenus.•Press Back (c) to return to the previous menu.•Press i to return to the Start screen from any menu or submenu.Use a shortcutYou can go directly to almost any menu or submenu, as well as activate most features by using a shortcut.•Press Menu, then within 3 seconds, press the key or keys associated with the menu function you want to view or activate.For example, to select the Meeting profile, press Menu 3-3-1 from the Start screen (Menu > 3Profiles > 3Meeting > 1Select). After a brief pause, the Meeting profile is activated.A complete list of shortcuts begins on the following page.Check in-phone helpMany features have brief descriptions (help text) which can be viewed on the display. To view these descriptions, scroll to a feature and wait for about 15 seconds. Press More to view all of the description (if necessary), or press Back to exit.ACTIVATE OR DEACTIVATE HELP TEXT1At the Start screen, press Menu 4-4-7 (Settings > Phone settings > Help text activation).2After a brief pause, On and Off appear in the display.3Scroll to On or Off and press Select. A confirmation message appears in the display indicating your selection.
DRAFT[ 26 ]Menu shortcutsTo access a menu or item, press Menu, then enter the numbers associated with the desired menu or item. For example, press Menu 2-1 (Call log > Missed calls) to view any missed calls.1 MESSAGESTEXT MESSAGES. . . . . . . . 01-1Create message. . . . . . . 01-1-1Inbox . . . . . . . . . . . . . . . 01-1-2Create e-mail . . . . . . . . 01-1-3Sent items . . . . . . . . . . . 01-1-4Archive. . . . . . . . . . . . . . 01-1-5Templates . . . . . . . . . . . 01-1-6My folders . . . . . . . . . . . 01-1-7Distribution lists . . . . . . 01-1-8Delete messages . . . . . . 01-1-9MULTIMEDIA MSGS . . . . . . 01-2Create message. . . . . . . 01-2-1Inbox . . . . . . . . . . . . . . . 01-2-2Outbox. . . . . . . . . . . . . . 01-2-3Sent items . . . . . . . . . . . 01-2-4Saved items. . . . . . . . . . 01-2-5Delete messages . . . . . . 01-2-6VOICE MESSAGES . . . . . . . . 01-3Listen to voicemessages . . . . . . . . . . . . 01-3-1Voice mailbox number . 01-3-2INFO MESSAGES. . . . . . . . . 01-4Info service . . . . . . . . . . 01-4-1Topics. . . . . . . . . . . . . . . 01-4-2Language. . . . . . . . . . . . 01-4-3Info topics saved onSIM card . . . . . . . . . . . . 01-4-4Read (if received only) . 01-4-5MESSAGE SETTINGS . . . . . . 01-5Text messages . . . . . . . . 01-5-1Multimedia msgs. . . . . . 01-5-2Other settings . . . . . . . . 01-5-3SERVICE COMMANDS . . . . 01-62CALL LOGMISSED CALLS . . . . . . . . . . . 2-1RECEIVED CALLS . . . . . . . . . 2-2DIALED NUMBERS . . . . . . . . 2-3DELETE RECENT CALL LISTS. 2-4All . . . . . . . . . . . . . . . . . . . 2-4-1Missed . . . . . . . . . . . . . . .2-4-2Received. . . . . . . . . . . . . . 2-4-3Dialed . . . . . . . . . . . . . . . . 2-4-4CALL TIMERS . . . . . . . . . . . . 2-5Duration of last call. . . . . 2-5-1Duration of receivedcalls. . . . . . . . . . . . . . . . . . 2-5-2Duration of dialedcalls. . . . . . . . . . . . . . . . . . 2-5-3Duration of all calls. . . . . 2-5-4Clear timers . . . . . . . . . . . 2-5-5GPRS DATA COUNTER . . . . . 2-6Data sent in lastsession . . . . . . . . . . . . . . . 2-6-1Data receivedin last session. . . . . . . . . . 2-6-2All sent data. . . . . . . . . . . 2-6-3All received data . . . . . . .2-6-4Clear counters . . . . . . . . . 2-6-5GPRS CONNECTION TIMER. . 2-7Duration of last session . 2-7-1Duration of all sessions. .2-7-2Clear timers . . . . . . . . . . . 2-7-3
DRAFT[ 27 ]Basic operations3PROFILESNORMAL. . . . . . . . . . . . . . . . 3-1Select . . . . . . . . . . . . . . . .3-1-1Customize. . . . . . . . . . . . .3-1-2Ringing options. . . . .3-1-2-1Ringing tone . . . . . . .3-1-2-2Ringing volume. . . . .3-1-2-3Vibrating alert. . . . . .3-1-2-4Message alert tone. .3-1-2-5Keypad tones. . . . . . .3-1-2-6Warning tones . . . . .3-1-2-7Alert for. . . . . . . . . . .3-1-2-8Timed. . . . . . . . . . . . . . . . .3-1-3SILENT . . . . . . . . . . . . . . . . . 3-2Select . . . . . . . . . . . . . . . .3-2-1Customize. . . . . . . . . . . . .3-2-2Ringing options. . . . .3-2-2-1Ringing tone . . . . . . .3-2-2-2Ringing volume. . . . .3-2-2-3Vibrating alert. . . . . .3-2-2-4Message alert tone. .3-2-2-5Keypad tones. . . . . . .3-2-2-6Warning tones . . . . .3-2-2-7Alert for. . . . . . . . . . .3-2-2-8Profile name . . . . . . .3-2-2-9Timed. . . . . . . . . . . . . . . . .3-2-3MEETING . . . . . . . . . . . . . . . 3-3OUTDOOR . . . . . . . . . . . . . . 3-4PAGER. . . . . . . . . . . . . . . . . . 3-5Submenus for Meeting, Outdoor, and Pager are the same as Silent.4 SETTINGSRIGHT SELECTION KEYSETTINGS . . . . . . . . . . . . . . . 4-1Select options. . . . . . . . . .4-1-1Organize. . . . . . . . . . . . . . 4-1-2TIME AND DATE SETTINGS. . 4-2Clock . . . . . . . . . . . . . . . . 4-2-1Date . . . . . . . . . . . . . . . . . 4-2-2Auto-update ofdate & time. . . . . . . . . . . 4-2-3CALL SETTINGS . . . . . . . . . . 4-3Call forwarding . . . . . . . . 4-3-1Anykey answer . . . . . . . . 4-3-2Automatic redial . . . . . . . 4-3-31-touch dialing . . . . . . . . 4-3-4Call waiting . . . . . . . . . . . 4-3-5Summary after call . . . . . 4-3-6Send my caller identity. . 4-3-7Line for outgoing calls1 . 4-3-8PHONE SETTINGS. . . . . . . . . 4-4Language . . . . . . . . . . . . . 4-4-1Automatic Keyguard . . . . 4-4-2Cell info display. . . . . . . . 4-4-3Welcome note . . . . . . . . . 4-4-4System selection. . . . . . . 4-4-5Confirm SIM serviceactions . . . . . . . . . . . . . . . 4-4-6Help text activation . . . . 4-4-7Start-up tone . . . . . . . . . 4-4-8Memory status . . . . . . . . 4-4-9DISPLAY SETTINGS. . . . . . . . 4-5Wallpaper . . . . . . . . . . . . 4-5-1Color schemes . . . . . . . . . 4-5-2Operator logo . . . . . . . . . 4-5-3Screen saver timeout . . . 4-5-4Display brightness. . . . . . 4-5-5TONE SETTINGS . . . . . . . . . . 4-6Ringing options. . . . . . . . 4-6-1Ringing tone . . . . . . . . . . 4-6-2Ringing volume . . . . . . . . 4-6-3Vibrating alert. . . . . . . . . 4-6-4Message alert tone . . . . . 4-6-5Keypad tones. . . . . . . . . . 4-6-61 For availability, contact your wireless provider.
DRAFT[ 28 ]Warning tones. . . . . . . . . 4-6-7Alert for . . . . . . . . . . . . . . 4-6-8ENHANCEMENT SETTINGS . . 4-7Headset . . . . . . . . . . . . . . 4-7-1Default profile. . . . . 4-7-1-1Automatic answer. . 4-7-1-2Handsfree . . . . . . . . . . . . 4-7-2Default profile. . . . . 4-7-2-1Automatic answer. . 4-7-2-2Lights . . . . . . . . . . . . 4-7-2-3Loopset . . . . . . . . . . . . . . 4-7-3Default profile. . . . . 4-7-3-1Automatic answer. . 4-7-3-2TTY/TDD . . . . . . . . . . . . . . 4-7-4Use TTY. . . . . . . . . . . 4-7-4-1Music stand. . . . . . . . . . . 4-7-5SECURITY SETTINGS . . . . . . . 4-8PIN code request. . . . . . . 4-8-1Call restrictions. . . . . . . . 4-8-2Fixed dialing . . . . . . . . . . 4-8-3Closed user group . . . . . . 4-8-4Security level. . . . . . . . . . 4-8-5Access codes . . . . . . . . . . 4-8-6RESTORE FACTORYSETTINGS . . . . . . . . . . . . . . . 4-95ALARM CLOCK6RADIO7 GALLERY8ORGANIZERCALENDAR . . . . . . . . . . . . . . 8-1TO-DO LIST . . . . . . . . . . . . . . 8-29GAMESSELECT GAME. . . . . . . . . . . . 9-1GAME DOWNLOADS . . . . . . . 9-2MEMORY . . . . . . . . . . . . . . . 9-3SETTINGS . . . . . . . . . . . . . . . 9-410 APPLICATIONSSELECTAPPLICATION . . . . . . . . . . . 10-1APP. DOWNLOADS. . . . . . . 10-2MEMORY . . . . . . . . . . . . . . 10-311 EXTRASCALCULATOR . . . . . . . . . . . .11-1VOICE RECORDER. . . . . . . . .11-2VOICE COMMANDS . . . . . . .11-312 CONNECTIVITYINFRARED . . . . . . . . . . . . . 12-1GPRS . . . . . . . . . . . . . . . . . 12-2GPRS connection. . . . . . 12-2-1GPRS modem settings . . 12-2-2SYNCHRONIZE . . . . . . . . . . 12-313 SERVICESHOME . . . . . . . . . . . . . . . . 13-1BOOKMARKS . . . . . . . . . . . 13-2DOWNLOAD LINKS . . . . . . 13-3SERVICE INBOX . . . . . . . . . 13-4SETTINGS . . . . . . . . . . . . . . 13-5Active service settings. . 13-5-1Edit active servicesettings. . . . . . . . . . . . . . 13-5-2Appearance settings . . .13-5-3Cookie settings . . . . . . . 13-5-4Certificates. . . . . . . . . . .13-5-5Security modulesettings. . . . . . . . . . . . . . 13-5-6Service inbox settings . . 13-5-7GO TO ADDRESS . . . . . . . . 13-6CLEAR THE CACHE . . . . . . . 13-7
DRAFT[ 29 ]Basic operations • SET UP YOUR PHONEAdjust display brightness1Press Menu 4-5-5 (Settings > Display settings > Display brightness).After a brief pause, a bar chart appears in the display indicating the current brightness level.2Press f or e to adjust the brightness to your preference.Set the clockBefore many functions such as call timers and other features will operate properly, you need to set the clock.1At the Start screen, press Menu 4-2-1 (Settings > Time and date settings > Clock). After a brief pause, Show clock (or Hide clock), Set the time, and Time format appear in the display with Show clock (or Hide clock) highlighted.2Scroll to Set the time and press Select.3Enter the time (in hh:mm format) and press OK.4Scroll to am or pm and press Select. The time is set.Call and setup your voice mailSee “Voice messages” on page 69 for complete instructions and information on setting up your voice mail.1Once you have saved the voice mailbox number, press and hold 1. 2When you connect and the prerecorded greeting begins, follow the automated instructions to setup your voice mail.Listen to your voice messagesOnce you have setup voice mail, you can dial the number one of three ways:
DRAFT[ 30 ]• Dial the number using the keypad.• Press and hold 1.•Press Listen if there is a notification message in the display.When you connect and the prerecorded greeting begins, follow the automated instructions to listen to your voice messages.Use the optional headsetThe HDB-4 headset kit may be purchased with your phone or separately as an enhancement. CONNECT THE HEADSET1Plug the headset jack into the Pop-PortTM connector at the bottom end of your phone.2Position the headset on your ear as it appears in the illustration to the right.With the headset connected, you can make, answer, and end calls as usual:• Use the keypad to enter numbers.•Press h to place a call.•Press i to end a call.
DRAFT[ 31 ]Text entry5 Text entryYou can use two methods for entering text and numbers.• The standard mode is the only way to enter names into the contacts list or rename caller groups.•Predictive text input is a quick and easy method for writing messages or making calendar notes. • STANDARD MODEEnter text (Abc)• Press a key once to insert the first letter on the key, twice for the second letter, and so on. If you pause briefly, the last letter in the display is accepted and your phone awaits the next entry.•Press 0 to enter a space, thereby accepting a completed word.•Press 1 to enter a period (.).•Press s to display special characters. See more about special characters on the following pages.Enter numbers (123)To switch to 123 mode from Abc mode, press and hold p at any message entry screen until the icon in the upper left corner of the display switches from Abc to 123 (or vice versa).CLEAR THE SCREEN•Press Clear to backspace the cursor and delete a character.• Press and hold Clear to backspace continuously and delete multiple characters.
DRAFT[ 32 ]Enter punctuation and special charactersWhile at any text entry screen, press s to display special characters. Press and hold s if predictive text is on. The following characters are available:Use four-way scrollingNavigate special characters using the scroll keys much as you would a joystick. Once a character is highlighted, press Insert to insert the character into your message. • PREDICTIVE TEXT INPUTPredictive text input allows you to quickly write messages using your keypad and the built-in dictionary. You can use predictive text to write messages, create calendar notes, make to-do lists, and more.Activate/deactivate predictive text• At a text entry screen, press and hold Options. T9 prediction off or T9 prediction on appears (depending on the prior mode).OR1If predictive text is off, press Options, scroll to Predictive text, and press Select.2Scroll to the language of your choice and press Select.Predictive text is turned on. The predictive text icon ( ) appears in the upper left corner of the display..,‘?!“-()@/:_ ; + & %*=<>£$¥¤[ ] {}\ ~^¡¿ § # lUp DownLeft Right
DRAFT[ 33 ]Text entryNote: The Language setting in predictive text affects the time and date formats of the clock, alarm clock, and calendar.Write with predictive textFor example, to write Nokia with the English dictionary selected, press each of the following keys only once: (with predictive text on). The illustration below simulates your display each time a key is pressed. 6 6 5 4 2PREDICTIVE TEXT TIPS•Press 0 to enter a space and begin writing the next word.• If a displayed word is not correct, press s to see other matches.•If ? appears after a word, press Spell to add the word to the dictionary.•Press 1 to insert a period into your message.• Press and hold Options to turn predictive text on and off.• Press and hold s to display special characters. See “Enter punctuation and special characters” and “Use four-way scrolling” on the previous page for the easiest way to enter special characters.Note: Press p to switch predictive text on and off or to cycle through the available modes. As you press p, the following icons (not descriptions) appear in the display:Uppercase text Predictive text is Off Sentence case text Predictive text is OnLowercase text Predictive text is Off Lowercase text Predictive text is On
DRAFT[ 34 ]Add new words to the dictionaryIf you encounter a word that predictive text does not recognize, a question mark (?) follows the word and Spell appears in the lower left of the display.•Press Spell, enter your new word using the keypad, and press Save.The word is added to the dictionary as well as to the message you are writing.NOTES ABOUT ADDING WORDS• New words that you accept by pressing Select, 0, or deleting the space between two words are saved to the dictionary.• Depending on the language and the length of the words, you may be able to add hundreds of words to the dictionary.• When the dictionary is full, the most recent addition replaces the first.
DRAFT[ 35 ]Manage phone security6 Manage phone securityLock the keypad (Keyguard)Remember to lock your phone keypad to prevent accidental calls. If the keypad is locked, it unlocks when you receive a call. After the call, the lock automatically reactivates.Important: When the phone is locked, calls may be possible to emergency numbers (for example, 911 or other official emergency number). Key in the emergency number and press h. The number appears in the display after you have keyed in the last digit.• To lock the keypad, press Menu s.Unlock the keypad• At the Start screen, press Unlock s. • SECURITY LEVELSThe security level determines your access to features when a “non-owner” SIM card is used. A “non-owner” SIM card is one (other than the original) that is inserted after you power off the phone. There are three security levels:Off Owner and non-owner cards are treated the same.Memory Non-owner cards can access SIM memory. Any changes to the memory setting requires the security code.The owner card has access to all features, but the security code is required to change a memory setting.Phone The security code is required upon power-up.
DRAFT[ 36 ]Set your security level1At the Start screen, press Menu 4-8-5 (Settings > Security settings > Security level). 2After a brief pause, you are prompted to enter the security code. The default code is 12345. Enter the security code and press OK. 3Scroll to Off, Memory, or Phone and press Select. A message appears in the display confirming your selection • FIXED DIALINGOnce you setup and activate a fixed dialing list, your phone can make calls only to those numbers that you have defined in the fixed dialing list. Fixed dialing is a network feature and must be supported by your wireless provider.Note: When fixed dialing is set on, calls may be possible to certain emergency numbers in some networks (for example, 911 or other official emergency number).Set up and activate a fixed dialing list1At the Start screen, press Menu 4-8-3 (Settings > Security Settings > Fixed dialing). After a brief pause, the options in the following table appear in the display.Note: If you activate fixed dialing and the number list is empty, a “Call not allowed” message is displayed if you attempt outgoing calls, except for emergency numbers such as 911.On Activate fixed dialing (see note above).Off Deactivate fixed dialing.Number list View the numbers in your fixed dialing list.
DRAFT[ 37 ]Manage phone security2Scroll to Number list and press Select. Fixed dialing not active and then Fixed dialing list empty appear in the display.3You are prompted to enter the PIN2 code. Enter the PIN2 code and press OK.4Enter the fixed dialing number, or press Find to retrieve a number from your contacts list, and press OK.5Enter a name for the number and press OK. A confirmation note appears in the display and you are returned to the fixed dialing number list.6Press Back, scroll to On, and press Select to activate fixed dialing.View or edit the fixed dialing list1At the Start screen, press Menu 4-8-3 (Settings > Security Settings > Fixed dialing).2Scroll to Number list and press Select.3You are prompted to enter the PIN2 code. Enter the PIN2 code and press OK.4Any numbers which you have assigned to fixed dialing appear in the display.5Scroll to a number and press Options. 6The options in the following table appear in the display.View number View the number for an entryAdd Add a number to your fixed dialing listEdit Edit the highlighted entryDelete Delete the highlighted entryDelete all Delete all entries in your fixed dialing list
DRAFT[ 38 ]• Use the scroll keys to highlight an option.•Press Select to activate or enter the submenu of an option.Notes about fixed dialing• If a SIM card with fixed dialing that is activated is inserted into a phone that does not support fixed dialing, the SIM card is rejected.• If you try to add a name (without a number) to the fixed dialing list, you will receive an error message.• If you try to browse the fixed dialing list, but have not stored any numbers, Fixed dialing list empty appears in the display.• You cannot access SIM memory manually (view or copy numbers on the SIM card) while fixed dialing is active.Closed user groupsA closed user group is a network service that specifies the group of people whom you can call and who can call you. For more information contact your network operator or service provider.Note: When calls are limited to closed user groups, calls may be possible to certain emergency numbers in some networks (for example, 911 or other official emergency number). • ACCESS CODESUse access codes to change your security code, PIN code, and PIN2 code.Note: Avoid using codes similar to emergency numbers such as 911 to prevent accidental dialing of the emergency number.Security codeThe security code controls access to features such as the security level and is supplied with the phone. The preset code is 12345.Note: If you enter the wrong security code five times in succession, you will not be able to enter a code for five minutes, even if you power off the phone between incorrect entries.
DRAFT[ 39 ]Manage phone securityCHANGE YOUR SECURITY CODEOnce you change the security code from its preset of 12345, keep the new code secret, and in a safe place separate from your phone.1Press Menu 4-7-6-1 (Settings > Security settings > Access codes > Change security code).After a brief pause, you are prompted to enter the current security code (default is 12345).2Enter the current security code and press OK. You are prompted to enter the new security code.Enter the new security code (up to 10 characters) and press OK. You are asked to re-enter the new security code for verification.3Enter the new security code again and press OK. A message appears in the display confirming your security code has been changed.PIN codeThe PIN code protects the SIM card from unauthorized access. The PIN code can be 4- 8 digits in length. After three successive incorrect entries the PIN code is blocked and you will be asked to enter the personal unblocking key (PUK) code.Note: The PIN code must be obtained from your wireless provider. The PIN code is typically provided with your SIM card.PIN CODE REQUESTEnable your phone to request the PIN code upon power-up. This provides extra security in case your phone is lost or stolen.1Press Menu 4-8-1 (Settings > Security settings > PIN code request).2After a brief pause, you are prompted to enter the current PIN code. Enter the PIN code and press OK.3Scroll to On and press OK. A message appears in the display confirming your selection.
DRAFT[ 40 ]CHANGE YOUR PIN CODEBefore you can change your PIN code, you will need to enable PIN code request. See “PIN code request” immediately preceding this section.1Press Menu 4-7-6-2 (Settings > Security settings > Access codes > Change PIN code).2After a brief pause, you are prompted to enter the current PIN code. Enter the PIN code and press OK. 3You are prompted to enter the new PIN code. Enter the new PIN code and press OK.4You are prompted to re-enter the new PIN code for verification. Enter the new PIN code again and press OK. A message appears in the display confirming your PIN code has been changed.PIN2 CodeThe PIN2 code is required for features such as Fixed dialing. If you enter an incorrect PIN2 code three times in succession, the PIN2 code is blocked and you will have to enter the PUK2 code.Note: The original PIN2 code must be obtained from your wireless provider.CHANGE YOUR PIN2 CODE1Press Menu 4-7-6-3 (Settings > Security settings > Access codes > Change PIN2 code). You are prompted to enter the current PIN2 code.2Enter the current PIN2 code and press OK. You are prompted to enter the new PIN2 code.3Enter the new PIN2 code and press OK. You are asked to verify the new PIN2 code by entering it again.4Enter the new PIN2 code again and press OK. A message appears in the display confirming you have changed the PIN2 code.
DRAFT[ 41 ]Manage phone securityPersonal unblocking key (PUK) codesPUK and PUK2 codes are used to restore blocked PIN and PIN2 codes. Both PUK and PUK2 codes are eight characters in length and cannot be changed. PUK and PUK2 codes must be obtained from your wireless provider.Important: If you enter an incorrect PUK or PUK2 code 10 times in succession, the message SIM rejected appears in the display and the SIM card can no longer be used. You must contact your wireless provider for a new SIM card.
DRAFT[ 42 ]7ContactsYour contacts list can save up to 500 names, with multiple numbers and text notes for each name. The amount of numbers and text entries that you can save may vary, depending on their length and the total number of entries in the contacts list.Note: This feature uses shared memory. Please see “Shared memory” on page 13 for more information. • VIEW THE CONTACTS LIST1At the Start screen, press the right selection key (c) under Contacts. The menu items in the left column of the following table appear in the displayNote: If you have changed the function of the right selection key on your phone, Go to appears in the Start screen. See “Right selection key settings” on page 87 for details.Menu item FunctionFind Find a name or select from a list.Add contact Add an entry to your contacts list.Edit name Edit an existing contact.Delete Delete a contact and its associated numbers.Copy Copy entries from phone memory to SIM and vice versa.Add number Add a number to an existing contact.Settings Set memory in use (phone or SIM), change your contacts list view, and check the memory status of your phone and SIM card.
DRAFT[ 43 ]Contacts2Scroll to an item. Press Select to activate the feature or enter its submenu. • SAVE CONTACTSYou can save contacts to phone memory or to SIM memory.Quickly save a contact (name and number)1At the Start screen, enter the phone number you wish to save.2Press Options, ensure Save is highlighted, and press Select.3Enter a name for the number and press OK. A confirmation message appears in the display indicating your entry has been saved.Quickly save a number onlyYou can save a phone number as a stand-alone entry in your contacts list.1At the Start screen, enter the number you wish to save.2Press and hold Options. A save confirmation is displayed. 1-touch dialingDisplays the list of 1-touch dialing numbers saved to memory.Voice tags “Tag” is a contacts listing with a voice signal so you can call by speaking the signal into your phone.Info numbers Contact your wireless provider to obtain information.Service numbersContact your wireless provider to obtain service.Own numbers Displays the numbers (line 1, line 2, data) in use by your SIM card.Caller groups View and edit the properties (such as the ring tone) for any of the caller groups.Menu item Function
DRAFT[ 44 ]Save an entry using the contacts list1At the Start screen, press Contacts, scroll to Add contact, and press Select.2Enter a name using the keypad and press OK.3Enter a number and press OK.4Press Done to return to the Start screen.Save addresses and notesTo save an e-mail address, you will need to add it to an existing contact. 1Find the contact (name) in your contacts list to which you would like to add an address or note.2With the entry highlighted, press Details.3Press Options, scroll to Add detail, and press Select.4Scroll to the address or note of your choice and press Select.5Enter the text for the note or address and press OK.Select your contacts view and memory1Press Contacts, scroll to Settings, and press Select. 2Scroll to any of the options in the following table. Press Select to enter the submenu.Option FunctionMemory in useSelect the memory you wish to use. Options are Phone, SIM card, or Phone and SIM combined. With Phone and SIM selected, names and numbers are saved to phone memory but entries saved to both memories appear in the display.Contacts viewSelect the Name list, Name and number, or Name only view
DRAFT[ 45 ]ContactsNote: Address and notes information cannot be saved into the SIM card memory.Save multiple numbers and text items per contactYou can save different types of phone numbers and short text items per contact to the contacts list. The first number you save for any entry is automatically set as the default, or primary number.1At the Start screen, press d or g and scroll to the entry to which you wish to add a number or text item.2Press Details, then press Options.3Scroll to Add number or Add detail and press Select.4Scroll to one of the following types and press Select: 5Enter the number or text for the type you have selected and press OK.• To change the type, select Change type in the options list.CHANGE THE DEFAULT (PRIMARY) NUMBER1At the Start screen, press d or g, scroll to the entry you wish to change, and press Details. 2Scroll to the number you wish to set as default and press Options.3Scroll to As primary number and press Select.Memory statusView the amount of phone or SIM memory used as well as the amount of phone or SIM memory available General Mobile Home Work Fax E-mail address Web address Street address NoteOption Function
DRAFT[ 46 ]Search for a name in the contacts list1At the Start screen, press d or g to display the contents of your contacts list.2Press the key which corresponds to the first letter of the name for which you are performing a search.3Press d or g to scroll up and down through contacts in the list. Press f or e to move the cursor left or right in the search window at the bottom of the display, if necessary.4Press Details to view the details of the selected contact.Edit a name, number, or text item1Search for the entry as described in the previous section and press Details.2Scroll to the name, number, or text item you wish to edit and press Options. 3Scroll to Edit name, Edit number, or Edit detail and press Select. 4Edit the name, number, or detail to your preference and press OK.Delete contacts1At the Start screen, press Contacts, scroll to Delete, and press Select.2To delete individual names and numbers, scroll to One by one and press Select. 3Scroll to the entry you wish to delete, press Delete, and press OK to confirm the deletion.4To delete the entire contents of your contacts list, scroll to Delete all, then scroll to the contacts list you wish to delete (Phone or SIM card).5Press Delete, then press OK to confirm. You are asked to enter the security code.6Enter the security code and press OK.
DRAFT[ 47 ]Contacts • COPY CONTACT LIST ENTRIES1At the Start screen, press Contacts, scroll to Copy, and press Select.2Scroll to From phone to SIM card or From SIM card to phone and press Select.The following options appear in the display:3Scroll to the copy method of your choice and press Select. a) If you selected One by one, go to step 4.b) If you selected All or Primary numbers., go to step 6.4Scroll to the entry you wish to copy and press Copy.5Scroll to Keep original or Move original and press Select. The entry is copied and you are returned to the list of contact list entries.6If you selected All or Primary numbers in step 3, scroll to Keep original or Move original and press Select.7Press OK to confirm your choice. All entries are copied to the selected destination. Press Back to return to the list of contact list entries, or press i to exit and return to the Start screen.Caution: Select Keep original if you are unsure of which copy method to use. This ensures original entries are merely copied to the new location. Move original deletes files after copying.Send and receive business cardsYou can send and receive an entry in your contacts list via IR or text message, if supported by your wireless provider.One by one Select and copy entries one by one.All Copies all entries from the SIM card or phone.*Primary numbers Copies only primary numbers. This appears only if you select From phone to SIM.
DRAFT[ 48 ]RECEIVE A BUSINESS CARD USING IR1Press Menu 12-1 (Connectivity > Infrared) to ensure IR is activated.When you receive the business card, your phone beeps and a message appears in the display. 2Select Save to save the business card in the phone memory, or press Exit (or OK) to discard the business card.SEND A BUSINESS CARDYou can send a business card through IR or as an text message to a compatible phone or other handheld device.1Highlight an entry from the contacts list that you wish to send and press Details.2Press Options, scroll to Send bus. card, and press Select.• To send the business card through IR, make sure the receiving device is set up to receive data through its IR port and select Via infrared.• To send the business card as a message, select Via text message.3If you selected Via infrared (and the entry has multiple subentries), scroll to Primary number or All details and press Select. Your business card is sent.4If you selected Via text message (and the entry has multiple sub-entries), scroll to Primary number or All details and press Select.5Enter the number for your recipient or press Find to retrieve a number from your contacts list.6Press OK and the business card is sent. •1-TOUCH DIALINGYou can assign any entry in your contacts list with keys 2 through 9, and then dial those entries by pressing and holding the assigned key.
DRAFT[ 49 ]ContactsAssign a key to 1-touch dialing1At the Start screen, press Contacts, scroll to 1-touch dialing, and press Select.2Scroll to any empty slot and press Assign.3Enter the number (including the area code) and press OK, or press Find to retrieve a number from your contacts list.4Enter a name for the number and press OK. If 1-touch dialing is off, the phone displays a prompt asking if you would like to turn 1-touch dialing on. Press Yes to activate 1-touch dialing. The entry appears in the slot you have assigned.Make a call with 1-touch dialing• Press and hold the key to which an entry has been assigned. Your phone dials the entry assigned to the key.OR• Press the key to which an entry has been assigned and then press h. Your phone dials the entry assigned to the key. CHANGE 1-TOUCH DIALING NUMBERS1At the Start screen, press Contacts, scroll to 1-touch dialing, and press Select.2Scroll to the 1-touch dialing entry you wish to change and press Options.3Scroll to Change and press Select.4Enter the new number, or press Find to retrieve a number from your contacts list, and press OK.5Enter a name for the entry and press OK.
DRAFT[ 50 ]DELETE 1-TOUCH DIALING NUMBERS1At the Start screen, press Contacts, scroll to 1-touch dialing, and press Select.2Scroll to the 1-touch dialing location you wish to delete and press Options.3Scroll to Delete and press Select. You are asked to confirm the deletion.4Press OK to delete the key assignment. • VOICE DIALING You can dial up to 10 stored numbers in your contacts list using the voice dialing feature. Before you can place a call using voice dialing, you must first assign a voice ‘tag’ to the number.Note: Your phone must be on to use this function. Do not switch on the phone when wireless phone use is prohibited or when it may cause interference or danger.Assigning a voice tag to a phone numberYou can create a voice tag (such as a person’s name) for up to 10 contact list entries, then dial the number using the voice dialing feature. See “Dial a number using voice dialing” on page 51 for more information. It is easier for the phone to differentiate between long, unique voice tags. For example, you might want to record a person’s first and last names rather than only the first name.ASSIGNING A VOICE TAG TO AN ENTRY1At the Start screen, scroll to the name you want to give a voice tag.2Press Details, then Options, and scroll to Add voice tag. 3Press Select. The phone displays Press Start, then speak after tone.4Press Start. You hear several beeps, and Please speak now appears. 5Speak clearly into the microphone.
DRAFT[ 51 ]ContactsNote: Do not press Quit unless you want to cancel the recording.The phone automatically stops recording and then saves and replays the voice tag. If recording is not successful, your phone displays Voice system error. Press Options, scroll to Add voice tag, and repeat Steps 3-5.DIAL A NUMBER USING VOICE DIALINGBefore using voice dialing, note that:• Voice tags are not language dependent. They are dependent on the speaker’s voice.• Voice tags are sensitive to background noise. For best results, record them and make calls in a quiet environment.• When recording a voice tag or making a call by saying a voice tag, hold the phone in the normal position near to your ear.• Very short names are not accepted. Use long names and avoid similar names for different numbers.• Voice tags must be shorter than 2 seconds. Record them and make calls in a quiet environment.Note: You must say the name exactly as you said it when you recorded it. This may be difficult in, for example a noisy environment or during an emergency, so you should not rely solely upon voice dialing in all circumstances.1Press and hold the Contacts selection key.When you hear several beeps and Please speak now appears, release the button.Note: If you have the optional headset attached, press and hold the headset button. When the phone beeps and Please speak now appears, release the button.2Pronounce the voice tag clearly into the microphone. When the phone finds the voice tag, Found appears, and the phone automatically dials the number.If the phone does not locate a number, No match found appears.
DRAFT[ 52 ]If you are using the headset and the phone does not locate the number, you will hear an error tone and No match found appears. To start voice dialing again, press and hold the headset button immediately after the error tone.WORK WITH AN EXISTING VOICE TAGAfter you have associated a voice tag to a command, you can choose one of the following options:Play back a voice tag1Press Contacts and scroll to Voice tags.2Press Select, then scroll to the name with the voice tag you want to hear.3Press Options, scroll to Playback, and press Select.Change a voice tag1Press Contacts and scroll to Voice tags.2Press Select, then scroll to the name with the voice tag you want to change.3Press Options, scroll to Change, and press Select.4The phone displays Press Start, then speak after tone.5Press Start.6The phone repeats your voice tag, and Voice tag saved appears.Delete a voice tag1Press Contacts and scroll to Voice tags.2Press Select, then scroll to the name with the voice tag you want to erase.3Press Options, scroll to Delete, and press Select. Delete voice tag? appears. 4Press OK to erase the voice tag.
DRAFT[ 53 ]Contacts • VIEW INFO, SERVICE, AND OWN NUMBERSYour wireless provider may save the operating number of your phone, as well as various information and service numbers, to your SIM card.Note: This feature may not be supported by your SIM card. If so, contact your wireless provider for more information.1Press Contacts at the Start screen, scroll to one of the number types in the following table, and press Select.2To view details of any of the number types in the previous table, press Details when the number type appears in the display.Caller groupsYou can add contact list entries to any of five caller groups, then assign a unique ringing tone or graphic to that group. This enables you to identify callers from the group by their unique ringing tone or graphic. A caller group can be as small as one person or as large as your entire contacts list. Caller groups can be renamed to suit your preference.CALLER GROUP OPTIONS1At the Start screen, press Contacts, scroll to Caller groups, and press Select. The following caller groups are available.:2Use the scroll keys (d or g) to highlight a group. Press Select to display the following caller group options:Number type Used this number to...Info numbers Contact your wireless provider to obtain informationService numbers Contact your wireless provider to obtain serviceOwn numbers Display the operating number, or numbers which have been assigned to your phone by your wireless providerFamily VIP Friends Business Other
DRAFT[ 54 ]Set up a caller group1At the Start screen, press d or g to display a list of entries in your contacts list.Tip: Perform a “quick find” when contact list entries are displayed by entering the first letter of a name. appears at the bottom of the display to indicate that you are performing a search.2Scroll to a contact you would like to add to a caller group and press Details.3Press Options, scroll to Caller groups, and press Select.4Scroll to the caller group to which you would like to add the contact and press Select. A confirmation message appears in the display.Rename group Rename the group to your preference.Group ringing tone Set the ringing tone for the group.Group logo Turn the graphic for the caller group on or off.Group members Add or remove members from the caller group.
DRAFT[ 55 ]Menu functions8 Menu functionsMessages (Menu 1)If you have subscribed to a message service, you can send and receive messages to compatible phones that are also subscribed to a message service. You can also send and receive picture messages, multimedia messages, and e-mail if supported by your network. Composed messages can be up to 600 characters in length, and multimedia messages can be up to 1000 characters in length. Before you can send and receive messagesYou will need the following to send and receive messages:• A messaging service through your wireless provider• A message center number, which must be saved to your phone (if your wireless provider has not done so already)Message iconsIcons that precede the title of a message indicate the following:The message has not been read.The message has been read.A message (which you have composed) has not been sent.iThe message is a delivery report.The message is a MMS (multimedia message).
DRAFT[ 56 ]Choose your message typeYou can choose the type of message sent by your phone. Types include text, fax, e-mail, and page.Note: The default message type is Text.Note: This function can be used only if it is supported by your wireless provider.1At the Start screen, press Menu 01-5 (Messages > Message settings).2After a brief pause, Text messages appears highlighted. Press Select.3Sending profile is highlighted. Press Select.4Default profile is highlighted. Press Select. 5Scroll to Messages sent as and press Select.6Scroll to the message type of your choice and press Select. A message appears in the display confirming your selection.Save your message center numberMessages sent by your phone are routed through your wireless provider’s message center. Normally, this number is saved to your phone by your wireless provider. To save the number manually, do the following:1At the Start screen, press Menu 01-5 (Messages > Message settings).2Text messages is highlighted. Press Select.3Sending profile is highlighted. Press Select.4Default profile is highlighted. Press Select.5Scroll to Message center number and press Select.6If the box in the display is empty, enter the number given by your wireless provider and press OK.OR
DRAFT[ 57 ]Menu functionsIf the box is in the display is full, edit the number only if you are sure the number is incorrect and you would like to change the number, and press OK. A message appears in the display that confirms your number is saved. • TIPS FOR COMPOSING A MESSAGEPredictive text inputPredictive text allows you to write messages using a built-in dictionary. It is much faster than using the traditional “multi-tap” method. For each letter of the word that you are spelling, you only need to press the corresponding key on your keypad once. You can use predictive text to write a message, create a calendar note, make a to-do list, and more. See “Text entry” on page 31 for more information on writing with predictive text and special characters. • TEXT MESSAGESImportant:When sending SMS messages, your phone may display the words Message sent. This is an indication that the message has been sent to the SMS network and is not an indication that the message has been received at the intended destination. For more details about SMS services, check with your service provider.Write and send a text messageNote: This feature uses shared memory. Please see “Shared memory” on page 13 for more information.1At the Start screen, press Menu 01-1-1 (Messages > Text messages > Create message).After a brief pause, the message entry screen appears in the display.2Compose a message using the keypad and press Options.3Send is highlighted. Press Select.4Enter the recipient’s phone number, or press Find to retrieve a number from your contacts list, and press OK. Your message is sent.
DRAFT[ 58 ]Read a messageWhen you receive a message, your phone beeps and 1 message received appears in the display as well as the unopened letter icon ( ).1Press Show to read the message, or Exit to move it to your inbox.Note: When you have unopened messages in your inbox, is shown in the upper left corner of the Start screen as a reminder.2Use the scroll keys (d or g) to view the whole message if necessary. Tip: Keep scrolling to view other information, such as the sender number and time the message was sent.3Press Exit to return to the Start screen, or press Options for other choices, such as Reply or Forward.READ A LINKED MESSAGEYour phone can receive one long message (up to 600 characters) in sequences. You can start reading the first part before the phone has received the entire message.While viewing the message, you may see Some text missing on the display. This is normal, and the message content will be updated as soon as the missing sequence arrives.If the memory is full, you may have to delete a message from your inbox or outbox before your phone can update the missing text.Reply to a message1While viewing a message, press Options, scroll to Reply, and press Select.2Scroll to a format on the Start reply with menu and press Select.3Compose your reply using the keypad, then press Options, scroll to Send, and press Select. 4The number of the original sender appears in the display. Press OK and your reply is sent.
DRAFT[ 59 ]Menu functionsForward a message1While viewing a message, press Options. 2Scroll to Forward and press Select.3Choose to forward As text message or As e-mail and press Select.If you chose to forward As text message, Send is highlighted. Press Options and select Send. The text message is forwarded.If you chose to forward As e-mail, enter the recipient’s phone number or e-mail address, or press Find to retrieve the data from your contacts list then press OK. The e-mail is forwarded. • PICTURE MESSAGESNote: This feature uses shared memory. Please see “Shared memory” on page 13 for more information.Note: This function can be used only if it is supported by your network operator or service provider. Only phones that offer picture message features can receive and display picture messages.Your phone comes with 10 preloaded pictures. You can, however, overwrite any of the 10 pictures that come with your phone. Pictures can be attached to a message and sent by way of text message to compatible phones. Picture messages behave the same as text messages, but pictures take up more space than text. Pictures are stored in the “Templates” folder under Messages > Text messages > Templates.Note: You cannot send a picture message through e-mail.Download picturesYour phone can download pictures or receive them from compatible phones to use in messages. You can also create pictures and send them to your phone or other compatible phones using Nokia PC Suite.
DRAFT[ 60 ]Note: This function can be used only if it is supported by your wireless provider. Only phones that offer picture message features can receive and display picture messages.Receive a picture messageWhen you receive a picture message, your phone beeps and Message received appears in the display as well the message icon ( ).1Press Show to view the picture message, or press Exit to move it to your inbox.2If you have more than one picture message, scroll to the message of your choice and press Select to view the message.Note: When you have unopened picture messages in your inbox, is shown in the upper left corner of the Start screen as a reminder.3Use the scroll keys to view the whole picture if necessary. Tip: Keep scrolling to view other information, such as the sender number and time the message was sent.4Once you are finished, press Back to move the picture message to the Inbox, or press Options for other choices, such as Reply or Forward.TO SAVE THE PICTUREIf you want to save the picture to your Templates folder for later use:1Press Options, scroll to Save picture, and press Select. You can then enter a title for the picture and press OK.Note: If your templates folder is full of pictures, scroll to the picture you want to replace and press Select.Compose and send a picture messageOne picture message is equivalent in size to at least three text messages. When you insert a picture into a message, you will have enough remaining space for about 121 characters in the message. If you try to insert a picture into a message that is almost full of text, a beep sounds and you are prompted to delete some text before proceeding.
DRAFT[ 61 ]Menu functions1At the Start screen, press Menu 01-1-1 (Messages > Text messages > Create message). After a brief pause, the message edit screen appears in the display.2Write a message using the keypad (or enter nothing if you choose to just send a picture), and press Options.Tip: Insert pictures before adding text. You can then check remaining space for text in the upper right corner of the display.3Scroll to Insert picture and press Select. A list of pictures appears in the display.4Scroll to a picture and press View.5Press Insert to insert the picture into your message.ORPress Back, scroll to another picture, and press View again.6To send the picture message, press Options, scroll to Send, and press Select.7Enter the phone number for your recipient or press Find to retrieve a number from your contacts list and press OK. The message is sent.PREVIEW, CHANGE, OR DELETE A PICTURE MESSAGE1After a picture has been inserted into your message, press Options at the message edit screen.2Scroll to one of the following options and press Select.a) Preview—Previews the inserted message before sending. Press Back to return to the list of options.b) Change picture—Takes you back to the picture list.Scroll to highlight a new picture, press View, then press Insert to replace the previous picture in your message.c) Delete picture—Press OK to delete the picture from your message, or press Back to return to the list of options.
DRAFT[ 62 ] •E-MAILYou can send e-mail up to 160 characters in length to anyone with an e-mail address.Important: The e-mail address is included in the total character count for an e-mail message, which is 160 characters.Note: You cannot insert pictures into e-mail.Note: Wireless providers may customize the text message settings interface. For more details about text message services, please contact your wireless provider.Write and send an e-mail messageNote: See “Tips for composing a message” on page 57 for ways to write messages faster.1At the Start screen, press Menu 01-1-3 (Messages > Text messages > Create e-mail).After a brief pause, you are prompted to enter the e-mail address.2Enter the e-mail address or press Find to retrieve an e-mail address from your contacts list, and press OK.3Enter a subject for the e-mail and press OK.4Compose your e-mail using the keypad and press Options.Tip: Be sure and leave enough space in the total character count (160) for the e-mail address.5Scroll to Send e-mail, if necessary, and press Select. An E-mail server number box appears in the display.6If the box in the display is empty, enter the e-mail server number and press OK.OR
DRAFT[ 63 ]Menu functionsIf the box is in the display is full, edit the number only if you are sure the number is incorrect and you would like to change the number, then press OK.A message appears in the display confirming your e-mail is sent.Reply to a message or e-mailWhen you have received a text message or e-mail, , the number of new messages and ___ Message(s) received appears in the display.Note: The blinking indicates that the message memory is full. Before you can receive new messages, delete some of your old messages. See “Delete messages” on page 75 for more information.•Press Show to view the message now or Exit to view it later.READING THE MESSAGE LATER:1Press Menu, and select Messages, Text messages, and Inbox.2If more than one message is received, select the message you want to read and press Select.An unread text message is indicated by in front of the message, and an unviewed picture message by . • MULTIMEDIA MESSAGESNote: This feature uses shared memory. Please see “Shared memory” on page 13 for more information.A multimedia message (MMS) can contain text, images, and MIDI tones. Your phone has a multimedia message viewer for playing messages and a multimedia inbox for storing saved messages. Once you save the multimedia message, the image can be used as a screen saver or the sound as a ringing tone.
DRAFT[ 64 ]Your phone supports multimedia messages of up to 45 kB. If the maximum size is exceeded, the phone may not be able to receive the message. Depending upon your network, you may receive a message that includes an Internet address where you can go to view the multimedia message.Note: This function can be used only if it is supported by your wireless provider. Only compatible devices can receive and display multimedia messages.Pictures included in multimedia messages are scaled down to fit the size of your display.Note: The default setting of the multimedia message service is on, and your wireless provider may charge for messages received.Multimedia messaging supports the following formats:• Picture: JPEG, GIF, PNG, OTA-BMP and WBMP.• Sound: MIDINote: If a received message contains unsupported elements, they may be replaced with the text Object format not supported.Define MMS settingsBefore you can use the multimedia message feature, you need to first define the way you want to receive the messages.ALLOW MULTIMEDIA RECEPTIONYou can choose to receive all messages or to receive messages only when you are in the service provider’s home network.1At the Start screen, press Menu 01-6-2-2 (Messages > Message settings > Multimedia msgs. > Allow multimedia reception). After a brief pause, a list of options appears in the display.•Yes to allow all incoming messages•In home system to allow incoming messages only if you are in the service provider’s home system
DRAFT[ 65 ]Menu functions2After selecting one of the reception options, scroll to Incoming multimedia messages, then press Select.3Scroll to Retrieve, then press Select.BLOCK MULTIMEDIA RECEPTION1At the Start screen, press Menu 01-6-2-2 (Messages > Message settings > Multimedia msgs. > Allow multimedia reception). After a brief pause, a list of options appears in the display.2Scroll to No and press Select. ALLOW OR NOT ALLOW ADVERTISEMENTS1At the Start screen, press Menu 01-6-2-5 (Messages > Message settings > Multimedia msgs. > Allow advertisements). After a brief pause, Yes and No appear in the display.2Scroll to the setting of your choice and press Select.Other MMS settingsOther multimedia settings include saving your messages to the Sent items folder and editing your connection settings.1At the Start screen, press Menu 01-5-2 (Messages > Message settings > Multimedia msgs.). After a brief pause, a list of options appears in the display.2Scroll to an option. Press Select to activate the option or to enter its submenu.MessageSetting FunctionSave sent messagesSaves sent multimedia messages to the Sent items folder.Allow multimedia receptionChooses Yes, No, or In home network for your multimedia service. In home network cannot receive multimedia messages outside the home network.
DRAFT[ 66 ]Edit multimedia connection settings1At the Start screen, press Menu 01-6-2-4 (Messages > Message settings > Multimedia msgs. > Connection settings).2Scroll to Edit active multimedia settings and press Select.3The connection settings in the following table appear in the display. Scroll to a setting. Press Select to enter the setting submenu.Incoming multimedia messagesSelect Retrieve to receive multimedia messages, or Reject if you do not wish to receive multimedia messages.Connection settingsDefine connection settings for retrieving multimedia messages. Activate the set where you want to save the connection settings and then edit the settings.Allow advertisementsAllows you to enable or disable reception of automatic multimedia advertisements.Connection setting FunctionSettings’ name Rename the setting to your preference.Homepage Enter the internet address where your browser retrieves multimedia messages.Session mode Select session modes Temporary or Permanent.Data bearer Select the data bearer.GPRS access pointDefine the access point.MessageSetting Function
DRAFT[ 67 ]Menu functionsABOUT CONNECTION SETTINGSYou may be able to receive multimedia connection settings as a text message from your wireless provider or they may already be programmed into your phone. For more information, contact your wireless provider.SELECT A FONT SIZE FOR YOUR MESSAGES1Press Menu 01-6-3-1 (Messages > Message settings > Other settings > Font size). After a brief pause a list of choices appear in the display.2Scroll to Small font or Large font and press Select. A message appears in the display confirming your selection.Write and send a multimedia messageFor availability and subscription to the multimedia messaging service, contact your wireless provider.1At the Start screen, press Menu 01-2-1 (Messages > Multimedia msgs. > Create message) and press Select.2Enter the text of your message and press Options.3Scroll to Insert image or Insert sound clip and press Select.4From the Gallery menu, select Graphics or Tones and press Open.5Choose an image or sound clip from the list and press Options.6Scroll to Insert and press Select.IP address Enter or change the IP address.Authentication typeSelect from Normal or Secure.User name Edit or enter your user name.Password Edit or enter a password.Connection setting Function
DRAFT[ 68 ]A confirmation message appears when the object is added and appears at the top of the display screen to indicate that a multimedia message has been created.7Press Options, scroll to Send to number or Send to e-mail, and press Select.8Enter the number of the recipient or the e-mail address and press OK. The message is sent.Read and reply to a multimedia messageWhen a multimedia message is being received, appears (blinking) in the display. Once the message has been fully downloaded, and Multimedia message received appears in the display.1To view the message, press Show. To view the message later, press Exit (and then No when asked to discard).2While viewing the message, press Options. Some or all of the following options may appear in the display. Scroll to an option and press Select to activate the option or enter its submenu.Option FunctionDelete messageDelete a saved message.Reply Reply to the message. Press Options and then Send. The sender’s phone number or e-mail is used as the default.Forward to no. Forward the message to another number.Forward to e-mailForward the message to an e-mail address.Edit Edit the message. You can only edit messages that you have written.Details View the message subject, size, and class.
DRAFT[ 69 ]Menu functionsNote: If blinks and Multimedia memory full, view waiting msg. appears in the display, memory for multimedia messages is full. You need to delete some of your old messages. See “Delete messages” on page 75 for more information. • VOICE MESSAGESIf you subscribe to voice mail, your wireless provider will furnish you with a voice mailbox number. You need to save this number to your phone to use voice mail. When you receive a voice message, your phone lets you know by beeping, displaying a message, or both. If you receive more than one message, your phone shows the number of messages received.Save your voice mailbox numberYour wireless provider may have already saved your voice mailbox number to your phone. If so, the number will appear in the display in Step 2. Press OK to leave the number unchanged.1At the Start screen, press Menu 01-3-2 (Messages > Voice messages > Voice mailbox number).2After a brief pause, the Voice mailbox number screen appears in the display.3If the box is empty, enter the voice mailbox area code and number.4Press OK. Your phone confirms the number has been saved.Play Listen to a sound clip in the message, if one is included.Save tone Save a ringing tone, if included, to the gallery.Save image Save any picture that is attached to your picture gallery.Option Function
DRAFT[ 70 ]Tip: Save yourself the trouble of entering the mailbox codes each time you dial voice mail. See “Automate voice mail” later in this section for more information.Call and setup your voice mail1Once you have saved the voice mailbox number, press and hold 1. 2When you connect to voice mail and the prerecorded greeting begins, follow the service’s automated instructions to setup your voice mail.Listen to your voice messagesOnce you have setup voice mail, you can dial the number in one of four ways:• Dial the number using the keypad.• Press and hold 1.•Press Listen if there’s a notification message in the display.•Press Menu 01-3-1 (Messages > Voice messages > Listen to voice messages). After a brief pause, your phone dials the voice mail number.Once you connect and the prerecorded greeting begins, follow the automated instructions to listen to your voice messages.Automate voice mailYou can insert special characters called “dialing codes” into phone numbers such as voice mail and then save the number to a 1-touch dialing location. Dialing codes instruct the receiving system to pause, wait, bypass, or accept the numbers that follow them in the dialing string.Note: Each voice mail service can vary. The examples and steps that follow are for clarification. Check with your wireless provider if you have specific questions about your voice mail service.
DRAFT[ 71 ]Menu functionsWrite down some information1Write down your voice mailbox number.2Call and check your voice mail as you normally would.3Write down your step-by-step interaction with the recorded prompts. Keep in mind that each voice mail service may vary. However, it should look something like this:Dial 2145551212, pause 5 seconds, press 1, pause 2 seconds, press 1234, press pound key.Important: Be precise. You will need this information in “Setup voice mail with dialing codes” later in this section.LEARN HOW TO INSERT DIALING CODESPress s repeatedly to cycle through dialing codes. Once the desired code appears in the display, pause briefly and the code is inserted into the dialing string.For example, press s four times to display the “w” (wait character). Pause briefly and the wait character is inserted into the dialing string. Available dialing codes are as follows:*Bypasses a set of instructions+Precedes an international telephone numberpPauses for 2.5 seconds before sending any numbers that followwWait. Your phone waits for you to press h before it sends any numbers or codes that follow.
DRAFT[ 72 ]Setup voice mail with dialing codes1At the Start screen, press Contacts, scroll to 1-touch dialing, and press Select.2Scroll to an empty 1-touch dialing slot and press Assign.3Enter your voice mailbox number, including the area code.4Refer to the table entitled “dialing codes,” and enter any codes as necessary using the information that you wrote down earlier.For example, if you pause for 5 seconds after connecting to voice mail, enter p twice after the voice mailbox number, such as 2145551212pp.5Enter any remaining pauses, PIN codes, and other information that allows you to listen to your messages, then press OK.6Enter a name (such as Voice mail) and press OK. A message appears in the display confirming your 1-touch dialing location has been saved.Now, to dial and listen to your voice mail, just press and hold the assigned 1-touch dialing key at the Start screen. No other keypresses should be necessary to connect and listen to your messages. • MESSAGE OPTIONSSome or all of the options in the following table are available for text messages, picture messages, multimedia messages, and e-mail.1While viewing a text, picture, multimedia message, or e-mail press Options.2Scroll to highlight an option. Press Select to activate the option or enter its submenu:Option FunctionDelete Delete the message you are viewing.
DRAFT[ 73 ]Menu functions • ORGANIZE MESSAGES WITH FOLDERSSave messages to foldersYou can save messages to an existing folder or to a folder that you have created.1Press Menu 01-1-1 (Messages > Text messages > Create message).After a brief pause, the message entry screen appears in the display.2Write your message and press Options.3Scroll to Save message and press Select.4Scroll to the Archive, Templates, or My folders (if you have created a folder of your own) and press Select. The message is saved.Reply Reply to the message; you have the option to include the original text in the reply, a template, or empty screen.Use detail Extract numbers, e-mail addresses and website addresses from the current message.Forward Forward the message to another recipient.Edit Edit the message.Move Move the message to a folder you specify.Rename Rename the message before it is saved to a folder.Copy to calendarCopy text from the beginning of the message to your phone calendar as a reminder note for the current day.Message detailsView the sender’s name and phone number, the message center used, reception date and time.Option Function
DRAFT[ 74 ]See “My folders” on page 74 for more information on creating your own folders.View saved messages1At the Start screen, press Menu 01-1 (Messages > Text messages).2After a brief pause, scroll to the folder containing the message you wish to view and press Select.3Once the folder opens, scroll to the message you wish to view and press Select.Inbox folderMessages are automatically stored in the inbox after they have been read or if you press Back when Message received appears on the Start screen.Archive folderStore messages that have been read in the Archive folder.Templates folderPictures and prewritten templates are stored in the Templates folder. Preloaded templates can be edited/customized.USE TEMPLATES1At the Start screen, press Menu 01-1-6 (Messages > Text messages > Templates). After a brief pause, the folder opens.2Scroll to a template and press Select.My foldersKeep your messages organized by creating custom folders and saving some of your messages there.ADD A FOLDER OF YOUR OWN1At the Start screen, press Menu 01-1-7 (Messages > Text messages > My folders). After a brief pause, the folder opens. 2Press Options. Scroll to Add folder and press Select.3Enter a name for the new folder and press OK. The folder is added.
DRAFT[ 75 ]Menu functionsREMOVE A FOLDEROnly folders created in My folders can be deleted. The Inbox, Outbox, Archive, and Template folders are protected. When you delete a folder, all messages in the folder are also deleted.1At the Start screen, press Menu 01-1-7 (Messages > Text messages > My folders). After a brief pause, the folder opens.2Any folders that you have created appear in the display. Scroll to the folder you wish to remove and press Options. 3Scroll to Delete folder and press Select. You are asked to confirm the deletion.4Press OK to delete or Back to exit.Move a message to a folder1While viewing the message, press Options.2Scroll to Move and press Select.3Scroll to the destination folder and press Select. • DELETE MESSAGESIf your message memory is full and you have more messages waiting at the network, blinks in on Start screen. You can do the following to create more space:• Read some of the unread messages and then delete them.• Delete messages from some of your folders.Delete a single messageTo delete a single message, you need to open it first.1Press Menu 01-1 (Messages > Text messages). After a brief pause, a list of options appears in the display.2Scroll to the folder containing the message you wish to delete and press Select. A list of messages, if you have any, appears in the display.
DRAFT[ 76 ]3Scroll to the message you wish to delete and press Select. The message opens.4Press Options, scroll to Delete, and press Select.5You are asked to confirm the erasure. Press OK to delete the message or Back to exit.Delete all messages in a folder1At the Start screen, press Menu 01-1-9 (Messages > Text messages > Delete messages). After a brief pause, a list of your folders appears in the display.2Scroll to the folder containing the messages you wish to delete and press Select. You are asked to confirm your request.Important: If you select All messages, it deletes all messages in all of the folders.3Press OK to empty the folder. • CHANGE TEXT, E-MAIL, AND PICTURE MESSAGE SETTINGS1At the Start screen, press Menu 01-6-1-1 (Messages > Message settings > Text messages > Sending profile).2If more than one message profile set is supported by your SIM card, scroll to the set you wish to change and press Select. Message Setting FunctionMessage center numberSave the phone number of the message center, which is necessary for sending text messages; obtain this number is from your wireless provider.Default recipient numberFor text messages, the default number used to send messages.
DRAFT[ 77 ]Menu functionsOVERWRITE SETTINGS FOR TEXT, E-MAIL, AND PICTURE MESSAGESWhen the message memory is full, your phone cannot send or receive any new messages. However, you can set your phone to automatically replace old messages in the Inbox and Outbox folders when new ones arrive.1Press Menu 01-5-1 (Messages > Message settings > Text messages). After a brief pause, a list of options appear in the display.2Scroll to Overwriting in sent items or Overwriting in inbox and press Select. 3Scroll to Allowed and press Select to replace the old messages with new ones in the Sent items or Inbox folder, respectively.Use GPRS Set GPRS as the preferred method of sending text messages.Reply via same centerAllow the recipient of your message to send you a reply message by way of your message center (network service).Messages sent asSelect the message type: Text, E-mail, Page, or Fax.Message validity Define how long the network attempts to send your messages before it gives up.E-mail server numberThe default number used to send e-mail.Delivery reports Request the network to send delivery reports on your messages.Rename sending profileChange the name of the selected sending profile; the sending profile sets display only if your SIM card supports more than one set.Message Setting Function
DRAFT[ 78 ] • CHANGE MULTIMEDIA MESSAGE SETTINGS1At the Start screen, press Menu 01-5-2 (Messages > Message settings > Multimedia msgs.). After a brief pause, a list of options appears in the display.2Scroll to an option. Press Select to activate the option or to enter its submenu.Receive multimedia connection settings as a text messageYou may be able to receive multimedia connection settings as a text message from your wireless provider. For more information, contact your wireless provider.Message Setting FunctionSave sent messages Saves sent multimedia messages to the Sent items folder.Allow multimedia receptionChoose Yes, No, or In home network for your multimedia service. In home network cannot receive multimedia messages outside the home network.Incoming multimedia messagesSelect Retrieve to receive multimedia messages, or Reject if you do not wish to receive multimedia messages.Connection settings Allows you to view or edit active multimedia message settingsAllow advertisements Allows you to enable or disable reception of automatic multimedia advertisements.
DRAFT[ 79 ]Menu functionsUse the info message serviceWith the info message network service, you can receive short text messages on various topics, such as weather and traffic conditions, from your wireless provider. 1At the Start screen, press Menu 01-4 (Messages > Info messages). After a brief pause, the list of options in the following table appears in the display.2Scroll to an option. Press Select to activate the option or to enter its submenu.Note: For more information on topics, contact your wireless provider.Message setting FunctionInfo service Select On, Off, or Topic index to activate or deactivate the service.Topics Displays options for selecting, adding, editing, and deleting info topics.Language Select the language in which info messages are received. The language you select does not affect the language you select under the phone settings menu.Info topics saved on SIM cardSelect one or more info topics to save to your SIM card.
DRAFT[ 80 ]Call log (Menu 2) Call log stores information about the last 20 missed, 20 received, or 20 dialed calls. It also adds the total duration of all calls. When the number of calls exceed the maximum, the most recent call replaces the oldest. For Call log to work properly:• Your wireless provider must support caller ID, and it must be enabled.• Your calls cannot be blocked.• Your phone must be on and within the service area. • CALL LOG OPTIONSWhether you are viewing missed, received, or dialed calls, each of the menu options will be the same. Please refer to the following table regarding menu options for these features.Call time Display the date and time of the call.Send message Send a message to the number.View number Display the number.Edit number Edit the number and associate a name with the number.Save Enter a name for the number and save it to your contacts list.Add to contactsAdd the number to an existing entry in your contacts list, if the number is not associated with a name.Delete Clear the number from memory.Call Call the number.
DRAFT[ 81 ]Menu functions • VIEW MISSED CALLSMissed calls are calls that were never answered. You can check for missed calls in two ways:Note: The missed calls feature does not function while your phone is off or outside of the service area.1If # missed call appears in the display, press List. The phone number appears in the display.2Press Options to display the options listed in the table on page 80.3Scroll to an option, press Select to activate the option or to enter its submenu.OR1At the Start screen, press Menu 2-1 (Call log > Missed calls).After a brief pause, a list of missed calls appears in the display (if any exist).2Scroll to a name or number and press Options to display the options listed under “Call log options” on page 80.3Scroll to an option, press Select to activate the option or to enter its submenu. • VIEW RECEIVED CALLSReceived calls are calls that have been answered.1At the Start screen, press Menu 2-2 (Call log > Received calls).After a brief pause, a list of received calls appears in the display (if any exist).2Scroll to a name or number and press Options to display the options listed under “Call log options” on page 80.3Scroll to an option, press Select to activate the option or enter its submenu.
DRAFT[ 82 ] • VIEW DIALED NUMBERSYou can view dialed numbers in one of two ways:1At the Start screen, press h. Your most recently dialed numbers appear in the display.OR2At the Start screen, press Menu 2-3 (Call log > Dialed numbers). After a brief pause, your most recently dialed numbers appear in the display.3Scroll to a name or number and press Options to display the options listed under “Call log options” on page 80.4Scroll to an option, press Select to activate the option or enter its submenu.Call timesYou can receive up to five calls from the same number and view the time each call occurred. Your clock must be set for this feature to work accurately. See “Set the clock” on page 88 for instructions on setting your clock.1While viewing a missed or received call, press Options, scroll to Call time, and press Select.2The time that the last call occurred appears in the display. 3Press g to view other call times from this number. Press Back to return to the options list. • DELETE CALL LISTSTo clear any missed, dialed, or received calls from your phone memory:1At the Start screen, press Menu 2-4 (Call log > Delete recent call lists).After a brief pause, All, Missed, Received and Dialed appear in the display.2Scroll to the call type you want to clear and press Select.
DRAFT[ 83 ]Menu functions • VIEW CALL DURATION1Duration of last call. At the Start screen, press Menu 2-5-1 (Call log > Call timers > Duration of last call). The duration of your last call appears in the display.2Duration of received calls. At the Start screen, press Menu 2-5-2 (Call log > Call timers > Duration of received calls). The duration of all received calls appears in the display.3Duration of dialed calls. At the Start screen, press Menu 2-5-3 (Call log > Call timers > Duration of dialed calls). The duration of all dialed calls appears in the display.4Duration of all calls. At the Start screen, press Menu 2-5-4 (Call log > Call timers > Duration of all calls). The duration of all calls (missed, dialed, and received) appears in the display.Note: The actual time invoiced for calls by your service provider may vary, depending upon network features, rounding-off for billing, and so forth.
DRAFT[ 84 ]Profiles (Menu 3)Profiles define how your phone reacts when you receive a call or a message, how your keypad sounds when you press a key, and more. Ringing options, keypad tones, and other settings for each of the five available profiles can be left at their default setting, or customized to suit your needs. Select and customize the most suitable profile for your situation, such as when you are in a meeting or outdoors. The following profiles are available:Note: Profiles are also available for enhancements such as a headset and car kit. See “Enhancement settings” on page 99 for more information about enhancement profiles. • SELECT A PROFILE1At the Start screen, press Menu 3 (Profiles) or quickly press the power key.After a brief pause, the list of profiles appears in the display.2Scroll through the available profiles and press Select once the profile of your choice is highlighted. 3Scroll to Select and press Select. • CUSTOMIZE A PROFILEYou can customize any of the profiles in a variety of ways.1At the Start screen, press Menu 3 (Profiles).After a brief pause, the list of profiles appears in the display.2Scroll to the profile you wish to customize and press Select.• Normal • Silent • Meeting • Outdoor • Pager
DRAFT[ 85 ]Menu functions3Scroll to Customize and press Select.4Use the scroll keys to display each of the options in the following table. Once you arrive at the option you want to customize, press Select.Note: You cannot rename the Normal profile. • SET A TIMED PROFILETimed profiles can be used to prevent missed calls. For example, suppose you attend an event that requires your phone be set to Silent before the event starts, but you forget to return it to Normal until long after the event. During this time, you have missed several calls because the ringing tone was silent. A timed profile can prevent this by automatically returning your phone to the default profile at a time you specify.Ringing options Select the ringing tone styleRinging tone Select the ringing tone for incoming callsRinging volume Set the volume of your ringing toneVibrating alert Turn the vibrating alert on or offMessage alert tone Select the tone for received messagesKeypad tones Set the volume of your keypad tones (or turn them off)Warning tones Turn warning and confirmation tones on or offAlert for Define which caller groups the selected profile will accept or decline. See “Caller groups” on page 53 for more information.Profile name Rename the profile (up to 16 characters)
DRAFT[ 86 ]Note: Timed profiles can be set up to 24 hours in advance.1At the Start screen, press Menu 3 (Profiles).After a brief pause, the list of profiles appears in the display.2Scroll to the profile you wish to activate and set for timed expiration, then press Select.3Scroll to Timed and press Select.4Enter the time (in hh:mm format) and press OK.5Scroll to am or pm and press Select.The profile you have set for expiration is now active and appears in the Start screen along with the icon.
DRAFT[ 87 ]Menu functionsSettings (Menu 4) • RIGHT SELECTION KEY SETTINGSYou can change the function of the right selection key (c) on your phone so that your most frequently used functions can be quickly accessed from the Start screen. Choose functions1At the Start screen, press Menu 4-1 (Settings > Right selection key settings).2After a brief pause, Options is highlighted in the display. Press Select.3Use the scroll keys (d or g) to highlight the desired function from the list of available functions.4Press Mark. A mark appears in the box next to the selected function indicating that you have selected the function. Use Unmark to remove a function from the list.Note: The Contacts function cannot be Unmarked from the list.5Repeat steps 3 and 4 to select as many functions as you wish.6Press Done when you have added all desired functions.7Save changes? appears in the display. Select Yes.At the Start screen, Go to is now the right selection key (c) option on your phone. Selecting Go to displays a list of the functions you selected in steps 4 and 5.Organize functions1At the Start screen, press Menu 4-1 (Settings > Right selection key settings).2Scroll to Organize and press OK. The list of functions is displayed.
DRAFT[ 88 ]3Use the scroll keys (d or g) to highlight the function you wish to rearrange and select Move.4Highlight Move up, Move down, Move to top, or Move to bottom from the list of choices and press Select.The list of right selection key functions is displayed in the new order. • TIME AND DATE SETTINGSSet the clock1At the Start screen, press Menu 4-2-1 (Settings > Time and date settings > Clock). After a brief pause, Show clock (or Hide clock) Set the time, and Time format appear in the display with Show clock (or Hide clock) highlighted.2Scroll to Set the time and press Select.3Enter the time (in hh:mm format) and press OK.4Scroll to am or pm and press Select. The time is set.Show/hide the clockYou have the option of displaying (or not displaying) the clock on the Start screen.1At the Start screen, press Menu 4-2-1 (Settings > Time and date settings > Clock). After a brief pause, Show clock (or Hide clock) Set the time, and Time format appear in the display with Show clock (or Hide clock) highlighted.2Press Select.• If your clock was previously “hidden,” (not shown on the display), it will now appear in the upper right corner of the Start screen.• If your clock was previously shown in the display, it will now be hidden from view.
DRAFT[ 89 ]Menu functionsChange the time formatYou can set the time format for am/pm or 24-hour format (military time).1At the Start screen, press Menu 4-2-1 (Settings > Time and date settings > Clock). After a brief pause, Show clock (or Hide clock) Set the time, and Time format appear in the display with Show clock (or Hide clock) highlighted.2Scroll to Time format and press Select.3Scroll to 24-hour or am/pm and press Select. A message appears in the display confirming your selection.Set the date1At the Start screen, press Menu 4-2-2 (Settings > Time and date settings > Date). After a brief pause, a list of options appears in the display.2Scroll to Set the date and press Select.3Enter the date and press OK. The date is set.Set or change the date format1At the Start screen, press Menu 4-2-2 (Settings > Time and date settings > Date). 2Scroll to Date format or Date separator and press Select. 3Scroll to the format of your choice and press Select. A message appears in the display confirming your selection. • CALL SETTINGSCall forwardingCall forwarding tells your network to redirect incoming calls to another number.
DRAFT[ 90 ]Note: Call forwarding is network-dependent and may not work the same in all networks. Contact your wireless provider for availability.ACTIVATE CALL FORWARDINGNote: This is a network dependent feature. All options listed in the following table may not appear in the display. Contact your wireless provider for more information.1At the Start screen, press Menu 4-3-1 (Settings > Call settings > Call forwarding).2After a brief pause, the forwarding options listed in the following table appear in the display.3Scroll to the option of your choice and press Select.Forward all voice callsForward all calls to the number you specify.Forward if busy Forward incoming calls when you are in a call.Forward if not answeredForward incoming calls to another number if you are unable to answer. You can also set a delay before forwarding takes place.Forward if out of reachForward incoming calls when your phone is off.Forward when not able to take callsForward calls that aren’t picked up. You can also set a delay before forwarding takes place.Forward all fax calls Forward all fax calls to a fax mailbox.Forward all data calls Forward all data calls to a data mailbox.Cancel all call forwardingCancel any call forwarding options you may have set.
DRAFT[ 91 ]Menu functions4Scroll to Activate and press Select.5Scroll to the destination to which your calls will be forwarded (such as To other no.) and press Select.6Enter the number to which your calls, data, or other information will be forwarded and press OK.Your phone calls the network to activate the feature you have requested. The network sends a confirmation note when the feature has been activated successfully.CANCEL CALL FORWARDING• At the Start screen, press Menu 4-3-1-8 (Settings > Call settings > Call forwarding > Cancel all call forwarding).Note: Cancel all call forwarding may affect your ability to receive voice mail messages. Contact your wireless provider for specific details.Anykey answerAnykey answer allows you to answer an incoming call by briefly pressing any key except a, b, c, and i.1At the Start screen, press Menu 4-3-2 (Settings > Call settings > Anykey answer). After a brief pause, On and Off appear in the display.2Scroll to your choice and press Select.Automatic redialOccasionally, your network may experience heavy traffic, resulting in a “fast” busy signal when you dial. With automatic redial activated, your phone redials the number up to 10 times, and notifies you once the network becomes available.ACTIVATE OR DEACTIVATE AUTOMATIC REDIAL1At the Start screen, press Menu 4-3-3 (Settings > Call settings > Automatic redial). After a brief pause, On and Off appear in the display.2Scroll to your choice and press Select.
DRAFT[ 92 ]Call waitingIf supported by your wireless provider, call waiting notifies you of an incoming call even while you are in a call. You can then accept, reject, or ignore the incoming call.ACTIVATE CALL WAITING1Press Menu, scroll to Settings, and press Select.2Scroll to Call settings and press Select. 3Scroll to Call waiting and press Select.4Scroll to Activate and press Select.USE CALL WAITING• During a call, press h to answer the waiting call. The first call is put on hold. •Press i to end the active call.Activate/deactivate summary after callYour phone can display the time spent on a call when you hang up. TURN ON SUMMARY AFTER CALL1At the Start screen, press Menu 4-3-6 (Settings > Call settings > Summary after call). After a brief pause, On and Off appear in the display. 2Scroll to On and press Select.TURN OFF SUMMARY AFTER CALL1At the Start screen, press Menu 4-3-6 (Settings > Call settings > Summary after call). After a brief pause, On and Off appear in the display. 2Scroll to Off and press Select.
DRAFT[ 93 ]Menu functionsSend my caller identity with next callYou can prevent your number from being displayed on the receiving party’s caller ID. This feature is network dependent and works on a call-by-call basis. Contact your wireless provider for more information.1At the Start screen, press Menu 4-3-7 (Settings > Call settings > Send my caller identity). After a brief pause, Default, Yes, and No appear in the display.2Scroll to the selection of your choice and press Select. A message appears in the display confirming your selection.Select a line for outgoing callsNote: This is a network dependent feature. Check with your wireless provider for availability and a description of the feature.1At the Start screen, press Menu 4-3-8 (Settings > Call settings > Line for outgoing calls). After a brief pause, Line 1 and Line 2 appear in the display.Important: If you select Line 2 and have not subscribed to this network service, you will not be able to place calls. However, calls on both lines can be answered regardless of the selected line.2Scroll to Line 1 or Line 2 and press Select. A message appears in the display confirming your selection.Tip: If supported by your SIM card, you can prevent the line selection by using the Lock option. • PHONE SETTINGSSet the display language1At the Start screen, press Menu 4-4-1 (Settings > Phone settings > Language).After a brief pause, Automatic, English, Português, Español, and Français appear in the display.
DRAFT[ 94 ]2Scroll to the language of your choice and press Select.Note: The language setting affects the time and date formats of the clock, alarm clock, and calendar.Activate or deactivate automatic KeyguardImportant: When Keyguard is on, it may be possible to dial emergency numbers (for example, 911 or other official emergency numbers). Key in the emergency number and press h. The number is displayed only after you have keyed in its last digit.You can set the keypad of your phone to lock automatically after a preset time delay (from 10 seconds to 60 minutes). When the preset delay expires, the keypad locks automatically.1At the Start screen, press Menu 4-4-2 (Settings > Phone settings > Automatic keyguard). After a brief pause, On and Off appear in the display.2Scroll to On (or Off to deactivate) and press Select. 3If you selected On, Set delay appears in the display. 4Enter the delay (in minutes and seconds) and press OK.Cell info displayNote: Cell info display is network-dependent and may not work the same in all networks. Contact your wireless provider for availability.When this function is selected, your phone will indicate when it is used in a system cell based on micro-cellular network technology. MCN technology increases the capacity of wireless networks in urban areas. The setting will remain in effect even if the SIM card is changed or the phone is switched off.1Press Menu 4-4-3 (Settings > Phone settings > Cell info display). After a brief pause, On and Off appear in the display.2Scroll to On (or Off) and press Select. A message appears in the display confirming your selection.
DRAFT[ 95 ]Menu functionsNote: If the GPRS connection is set to Always online, info messages may not be received. In that case, set the GPRS connection to When needed. See “(E)GPRS” on page 129 for more information.Welcome noteYou can write a welcome note which shows up briefly on your display whenever you power up your phone.Note: Predictive text input is unavailable for entering welcome note text.1At the Start screen, press Menu 4-4-4 (Settings > Phone settings > Welcome note). After a brief pause, the message edit screen appears in the display awaiting text input.2Enter a note (up to 44 characters). •Press s to display and select from available special characters. For more information on special characters, “Enter punctuation and special characters” on page 32.3When you are finished, press Options, scroll to Save, and press Select.Scroll to Delete and press Select if you want to delete the previous text and begin writing another note.System selectionYou may be able to manually search for another network which has a roaming agreement with your home wireless provider.1At the Start screen, press Menu 4-4-5 (Settings > Phone settings > System selection). After a brief pause, Automatic and Manual appear in the display.
DRAFT[ 96 ]2Scroll to Automatic or Manual and press Select.Note: If No system access appears in the display, you will need to switch to Automatic mode, or insert another SIM card into the phone.Confirm SIM service actionsThis option allows you to request notification when your service provider makes changes to SIM-related services (such as activating (E)GPRS service).1Press Menu 4-4-6 (Settings > Phone settings > Confirm SIM service actions). After a brief pause, Yes and No appear in the display.2Scroll to the selection of your choice and press Select. A message appears in the display confirming your selection.Note: For availability, rates and information on using SIM services, contact your SIM card vendor, for example, network operator, service provider, or other vendor.Help textYour phone displays brief descriptions for most menu items. When you arrive at a feature or menu, pause for about 10 seconds. Use the scroll keys to page through the full help text, if necessary.ACTIVATE/DEACTIVATE HELP TEXTThe default setting for Help text is On. However, you can turn help text on or off by doing the following from the Start screen.Option FunctionAutomatic Your phone defaults to those settings which have been preset by your wireless provider.Manual Your phone searches for a network which has a roaming agreement with your wireless provider.
DRAFT[ 97 ]Menu functions1Press Menu 4-4-7 (Settings > Phone settings > Help text activation). After a brief pause, On and Off appear in the display.2Scroll to your choice and press Select. A message appears in the display confirming your selection.Start-up toneNote: This feature is network dependent and may not be supported by your wireless provider. Contact your wireless provider for more information.You can set your phone to play (or not to play) a start-up tone when the phone is switched on.1At the Start screen, press Menu 4-4-8 (Settings > Phone settings > Start-up tone). After a brief pause, On and Off appear in the display.2Scroll to your choice and press Select. A message appears in the display confirming your selection. • DISPLAY SETTINGS WallpaperYou can set your phone to display a background picture (wallpaper) on the Start screen. Some preselected pictures are saved in the Gallery menu.You can also receive pictures via multimedia message, download them from xHTML pages, or transfer them with PC Suite from your PC, then save them in the Gallery. Your phone supports JPEG, GIF, BMP, PNG, and WBMP formats.SELECT WALLPAPER1Press Menu 4-5-1 (Settings > Display settings > Wallpaper). After a brief pause, On, Off, and Change image appear in the display.2Scroll to Change image and press Select to browse the gallery for another image.
DRAFT[ 98 ]3Use the scroll keys (d or g) to browse the image gallery. When you arrive at the image of your choice, press Options, scroll to Set as wallpaper, and press Select.4If Replace current wallpaper? appears in the display, press OK. A message appears in the display confirming your selection.ACTIVATE/DEACTIVATE WALLPAPER1Press Menu 4-5-1 (Settings > Display settings > Wallpaper). After a brief pause, On, Off, and Change image appear in the display.2Scroll to On or Off and press Select.Color schemesYou can change the color of some display components in your phone, such as indicators and signal bars.1At the Start screen, press Menu 4-5-2 (Settings > Display settings > Color Schemes). After a brief pause, a list of color schemes appear in the display.2Scroll to the color scheme of your choice and press Select. A message appears in the display confirming your selection.Screen saverThe screen saver is activated when no function of the phone is used after a preset period of time. Press any key to deactivate the screen saver. The screen saver is also deactivated when the phone is out of the network coverage area.You can set your phone to display a screen saver after a preset time or after a custom time (up to 60 minutes) of your choosing.1At the Start screen, press Menu 4-5-4 (Settings > Display settings > Screen saver timeout). After a brief pause, 2 minutes, 5 minutes, and Other appear in the display.2Scroll to 2 minutes or 5 minutes and press Select. 3If you want to set a custom time (up to 60 minutes), scroll to Other and press Select. Enter the custom time and press OK.
DRAFT[ 99 ]Menu functionsA message appears in the display confirming your selection.Display brightnessYou can change the brightness of your phone display. See “Adjust display brightness” on page 29 for more information. • TONE SETTINGSYou can adjust the ringing volume, keypad tones, and more for the currently active profile. The same options are described in detail under “Customize a profile” on page 84. • ENHANCEMENT SETTINGSThe Enhancement settings menu and submenus are shown only if the phone is or has been connected to one of the compatible enhancements such as the headset, car kit, mobile inductive loopset, TTY/TDD device, or music stand.1At the Start screen, press Menu 4-7 (Settings > Enhancement settings).2Scroll to Headset, Handsfree, Loopset, TTY, or Music stand and press Select.HeadsetScroll to the option of your choice and press Select to enter the option submenu and modify its settings. The following options are available:•Default profile—Choose the profile you wish to be automatically activated when a headset is connected.•Automatic answer—Calls are answered automatically after 1 ring when a headset is connected. Scroll to On or Off and press Select.HandsfreeScroll to the option of your choice and press Select to enter the option submenu and modify its settings. The following options are available:
DRAFT[ 100 ]•Default profile—Choose the profile you wish to be automatically activated when your phone is connected to a car kit.•Automatic answer—Calls are answered automatically after one ring when a car kit is connected. Scroll to On or Off and press Select.•Lights—Choose to keep the phone lights always on, or to shut off automatically after several seconds. Scroll to On or Automatic and press Select.LoopsetScroll to the option of your choice and press Select to enter the option submenu and modify its settings. The following options are available:•Default profile—Choose the profile you wish to be automatically activated when a loopset is connected.•Automatic answer—Calls are answered automatically after one ring when a loopset is connected. Scroll to On or Off and press Select.TTYWHAT YOU WILL NEEDIn addition to the Nokia phone, you will need the following for TTY/TDD communication.• A TTY/TDD device that is “cellular ready” or “cellular compatible.”• A cable for connecting the TTY/TDD to your phone, usually supplied by the manufacturer of the TTY/TDD device.• The TTY/TDD Adapter (HDA-10), which can be purchased as an enhancement at www.nokia.com/us. See “Enhancements” on page 151.SET UP THE TTY/TDD PROFILEYou can connect your phone to a TTY/TDD using the Nokia TTY/TDD Adapter (HDA-10). In order for your phone to recognize the TTY/TDD, you will need to set up the TTY/TDD profile.
DRAFT[ 101 ]Menu functionsImportant: Some manufacturers of TTY/TDD devices suggest that the phone be least 18 inches from the TTY/TDD device. When connecting to any other device, read its user guide or contact its manufacturer for detailed instructions and safety information.1Plug the HDA-10 adapter into the connector on the bottom of your phone, as shown in the illustration.2Press Menu 4-7-4-1 (Settings > Accessory settings > TTY/TDD > Use TTY).3Scroll to Yes, then press Select.4Connect the TTY/TDD by a cable to the HDA-10 adapter.NOTES ABOUT TTY/TDD CALLS• The Nokia TTY/TDD Adapter (HDA-10) is for use with compatibleTTY/TDD devices only. Check with the manufacturer of the TTY/TDD device to ensure that the connection is compatible. • Check with the manufacturer of the TTY/TDD device for a connecting cable that is compatible with the Nokia TTY/TDD Adapter (HDA-10).• TTY/TDD communications depend on network availability. Check with your service provider for availability and description of services.MAKE A TTY/TDD CALL1From the Start screen, enter the number and press h.2When the receiving party answers, begin typing your conversation on the TTY/TDD. Press i to end the call.18”
DRAFT[ 102 ]RECEIVE A TTY/TDD CALL1Make sure the TTY/TDD device is connected to your phone.2Press h to answer the call, then type your responses on theTTY/TDD. Press i to end the call.Music StandScroll to the option of your choice and press Select to enter the option submenu and modify its settings. The following options are available: •Default profile—Choose the profile you wish to be automatically activated when your phone is connected to a music stand.•Automatic answer—Calls are answered automatically after one ring when a music stand is connected. Scroll to On or Off and press Select.•Lights—Choose to keep the phone lights always on, or to shut off automatically after several seconds. Scroll to On or Automatic and press Select. • SECURITY SETTINGSFor information on PIN code request, call restrictions, fixed dialing, and other security features, see “Manage phone security” on page 35. • RESTORE FACTORY SETTINGSYou can reset some of the menu settings to their original values.1At the Start screen, press Menu 4-9 (Settings > Restore factory settings). After a brief pause, you are prompted to enter the security code.2Enter the security code (the default is 12345) and press OK. A message appears in the display confirming your original settings have been restored.Note: Any data that you have entered, such as names and numbers in your contact list will not be deleted.
DRAFT[ 103 ]Menu functionsAlarm clock (Menu 5)The alarm clock is based on the internal clock of your phone. It sounds an alert any time you specify and even works if the phone is off. • SET AN ALARMIF AN ALARM HAS NOT BEEN SET1At the Start screen, press Menu 5 (Alarm clock). After a brief pause, you are prompted to enter a time for the alarm.2Enter the time for the alarm in hh:mm format and press OK. 3Scroll to am or pm and press Select. Alarm on appears briefly in the display and appears on the Start screen.IF AN ALARM HAS PREVIOUSLY BEEN SET1At the Start screen, press Menu 5 (Alarm clock). After a brief pause, On and Off appear in the display.2Scroll to On and press Select. You are prompted to set the alarm time.3Enter the time for the alarm (in hh:mm format) and press OK. 4Scroll to am or pm and press Select. Alarm on appears briefly in the display and appears on the Start screen.When the alarm soundsYour phone beeps, vibrates, and the display lights up. Stop and Snooze appear in the bottom of the display.WITH THE PHONE ONPress Stop to shut the alarm off.OR Press Snooze. The alarm stops for 10 minutes and Snoozing appears in the display.
DRAFT[ 104 ]Note: If you do not press a key, the alarms stops (snoozes) for 10 minutes, and then sounds again.WITH THE PHONE OFF1The alarm sounds. If you press Stop the following appears in the display:Switch the phone on?Note: The phone will only power up if you select Yes when Switch the phone on? appears in the display.2Press Yes to power up the phone. Press No to keep it switched off.Warning: Do not press Yes when wireless phone use is prohibited or when it may cause interference or danger. • TURN OFF AN ALARM THAT HAS BEEN SET1At the Start screen, press Menu 5 (Alarm clock). After a brief pause, On and Off appear in the display.2Scroll to Off and press Select. Alarm off appears briefly in the display.
DRAFT[ 105 ]Menu functionsRadio (Menu 6)To listen to the FM radio on your phone, connect the Stereo Headset (HDS-3) or Headset Kit (HDB-4) to the connector on the bottom of the phone. The leads of the headset function as the antenna, so let it hang freely.Note: Your phone must be switched on to use this function. Do not switch the phone on when wireless phone use is prohibited or when it may cause interference or danger.Note: The quality of the radio broadcast depends on the coverage of the radio station in that particular area. • TURN THE RADIO ON AND OFF• At the Start screen, press Menu 6 (Radio). • To quickly turn off the radio, press and hold i. • USE THE RADIONote: When you place or receive a call, the radio automatically mutes. Once the call is ended, the radio automatically switches back on.• With the radio on, press Options to choose from the options listed in the following table. Press d or g to scroll to an option. Press Select to activate the option or enter its submenu.Option FunctionTurn off Turn off the radio.Save channel Save the current station to one of 20 locations.Automatic tuningBriefly press either scroll key to start the channel search up or down. Press OK when a channel is found.
DRAFT[ 106 ]Tip: To quickly set the radio frequency, press s with the radio on.Tip: To manually tune the radio, press p with the radio on.Note: When an application using a (E)GPRS connection is sending or receiving data, it may interfere with the radio. • SAVE A RADIO CHANNELYou can save a preset station to any one of 20 locations in memory, and then tune to that station by simply pressing d or g with the radio on.1With the radio on, press and hold d or g to start the channel search. Searching stops when a channel is found. 2To save the channel, press Options, scroll to Save channel, and press Select.3Enter a name for the channel and press OK. 4Next, scroll to an (empty) location to save the channel and press Select.Tip: To quickly save an FM station to a memory location from 1 to 9, press and hold the corresponding number key while the radio is playing. Then, enter the name of the channel and press OK.Manual tuning Press d or g to search in increments of 0.1 MHz.Set frequency Manually enter the frequency of a known radio station.Delete channelDelete a saved channel.Loudspeaker Listen to the radio through the speakerphone.(The headset must be connected.)Mono output/Stereo outputListen to the radio in monaural mode. If already in manual mode, Stereo output appears in the display.Option Function
DRAFT[ 107 ]Menu functionsGallery (Menu 7)You can save pictures and ringing tones to folders in the gallery, or create folders of your own and save them there. You can download images and tones using MMS, xHTML, or Nokia PC Suite.Note: This feature uses shared memory. Please see “Shared memory” on page 13 for more information.Note: Your phone must be switched on to use this function. Do not switch the phone on when wireless phone use is prohibited or when it may cause interference or danger. • OPEN THE GALLERYAt the Start screen, press Menu 7 (Gallery). After a brief pause, the submenus in the following table appear in the display.Option FunctionView folders Explore the folders in the gallery menu. See “View folders” in the following section for more info.Add folder Add a folder of your own.Delete folder Delete a folder you have created.Rename folder Rename a folder you have created.aGallery downloadsa. The phone tries to connect to the Internet using your xHTML browser and the currently active set of gallery downloads. If the connection fails, you may need to acti-vate another set or change the current settings. See “Set up for browsing” on page 137 for more information.Use the image and tone downloads in your phone; see the following for more information.
DRAFT[ 108 ] •VIEW FOLDERS1At the Start screen, press Menu 7 (Gallery), and then press Select.2Scroll to View Folders and press Select. A list of folders appear in the display.3Scroll to a folder, such as Graphics or Tones and press Open.4Scroll through the list of graphics or tones, and press Options. Press Select to activate the option or to enter its submenu.Option FunctionOpen Open the selected file.Delete Delete the selected file.Move Move the file to another folder.Rename Rename the selected file.Set as wallpaper/Set as ring toneSet the graphic as wallpaper. In the Tones folder, this option is Set as ringing tone; the tone is applied to profile in use.Details View details of the file, such as the name, time and date the file was created.Sort Sort the files according to date, type, name, or size.
DRAFT[ 109 ]Menu functionsOrganizer (Menu 8)Your phone has many useful features for organizing your everyday life, including a calendar and a to-do list.Note: Your phone must be switched on to use this function. Do not switch the phone on when wireless phone use is prohibited or when it may cause interference or danger. •CALENDARThe calendar keeps track of reminders, calls you need to make, meetings, and birthdays. It can even sound an alarm for any of these events.Note: This feature uses shared memory. Please see “Shared memory” on page 13 for more information.Open the calendar• At the Start screen, press Menu 8-1 (Organizer > Calendar). After a brief pause, the Monthly view appears in the display with the current date highlighted by a black box.Tip: To quickly open the calendar, press e at the Start screen. MONTHLY VIEWMonthly view provides an overview of the selected month and weeks. It also allows you to jump to a specific date. Any days or dates that appear in bold font contain calendar notes such as a meeting or reminder.
DRAFT[ 110 ]USE FOUR-WAY SCROLLINGYou can move the cursor in some calendar views using the four-way scroll keys. To move the cursor: Go to a date1Press Menu 8-1 (Organizer > Calendar). After a brief pause, the monthly view appears in the display.2Press Options, scroll to Go to date, and press Select.3Enter the date (for example 03/21/2003) and press OK. The monthly view appears in the display with the “jump date” highlighted.MAKE A NOTE FOR A SPECIFIC DATEYou can choose from five types of notes; Meeting, Call, Birthday, Memo, and Reminder. Your phone asks for further information depending on which note you choose. You also have the option to set an alarm for any note that you select.Note: This feature uses shared memory. Please see “Shared memory” on page 13 for more information.1Go to the date for which you want to set a reminder. See “Go to a date” in the previous section if you need more information. 2From the monthly view (with the go to date highlighted), press Options.3Scroll to Make a note, and press Select.4Scroll to one of the following note types and press SelectLeft, press f Up, press d Down, press gRight, press e Meeting Call Birthday Memo Reminder
DRAFT[ 111 ]Menu functions5Enter your note, press Options, scroll to Save, then press Select.•For a Meeting note, you are prompted to enter a subject, location, and then a start/end time (hh:mm). You are then given the option to set an alarm.•For a Call note, you are prompted to enter a phone number, a name, and the time (hh:mm). You are then given the option to set an alarm.•For a Birthday note, you are prompted to enter the person’s name and year of birth. You are then given the option to set an alarm.•For a Memo note, you are prompted to enter a subject and then an end date. You are then given the option to set an alarm.•For a Reminder note, you are prompted to enter the subject you wish to be reminded about. You are then given the option to set an alarm.View calendar notes - the Day viewAfter you have created some calendar notes, you can view them as follows:1At the Start screen, press Menu 8-1 (Organizer > Calendar).After a brief pause, the monthly view appears in the display with the current date highlighted. Any dates that contain calendar notes will be in bold font.2Use four-way scrolling to go to the date containing the note.3Press Options, scroll to View day, and press Select. Any notes you have for the day will appear in a list format.4To view the body of a highlighted note, press Options, scroll to View and press Select.Options while viewing a list of notes1Press Options while viewing the notes of a day to display those options listed in the following table.2Scroll to an option. Press Select to activate the option or to enter its submenu.
DRAFT[ 112 ]*Indicates an option that is available only while viewing the body of a note (not the header). • SEND AND RECEIVE CALENDAR NOTESSend a note via Infrared or text messageNote: If sending via IR (infrared), ensure the other device is set to receive data via IR. For more information on enabling the receiving device’s IR, refer to the user guide for the receiving device.View View the full note.Make a note Make another note for the selected date.*Delete Delete the note.*Edit Edit the note.*Move Move the note to another date on your calendar.*Repeat Enable the note to recur on a regular basis (daily, weekly, bi-weekly, monthly, and yearly)Go to date Jump to another date on your calendar*Send note Send the note to another device via Infrared or as a text message or in vCal format.*Copy Copy the note. You can then paste the note to another date.*SettingsSet the date and time, date and time format, the day each week starts, and whether you want your notes to auto-delete after a specified time.Go to to-do listTakes you to the to-do list for today’s date.
DRAFT[ 113 ]Menu functions1At the Start screen, press Menu 8-1 (Organizer > Calendar). After a brief pause, the monthly view appears in the display. 2Jump, or scroll to the date containing the note you wish to send. Tip: Any days containing notes will be in bold font.3Press Options, scroll to View day, and press Select. 4Scroll to the note you wish to send and press Options.5Scroll to Send note and press Select.6Scroll to Via Infrared, As note, or As text message, and press Select.7If you selected Via Infrared, align the infrared ports of both devices and press Select. The note is sent.• If you selected As note, enter the number for the recipient (or press Find to retrieve a number from your contacts list), and press OK. The note is sent.• If you selected As text message, the note appears in the display. •Press Options, scroll to Send, and press Select.• Enter the number for the recipient (or press Find to retrieve a number from your contacts list), and press OK. The note is sent.Receive calendar notes from another deviceWhen you receive a calendar note, your phone displays Calendar note received. You can then save the note in your calendar and set an alarm for any date and time.VIEW RECEIVED CALENDAR NOTES1When your phone displays Calendar note received, press Show.2The text of your note appears in the display. Use the scroll keys to view the entire message, if necessary.SAVE RECEIVED CALENDAR NOTES1After viewing the Calendar note, press Options.2Scroll to Save and press Select.
DRAFT[ 114 ]DISCARD VIEWED CALENDAR NOTES1After viewing the calendar note, press Options.2Scroll to Discard and press Select. • MAKE A TO-DO LISTNote: This feature uses shared memory. Please see “Shared memory” on page 13 for more information.You can keep track of your tasks with the to-do list feature. You may be able to save up to 30 notes, depending on their length.Note: To-do notes are not related to specific dates.Add a to-do note1At the Start screen, press Menu 8-2 (Organizer > To-do list).2After a brief pause, press Options. If this is your first time to use the to-do list, Add is highlighted. You can also go to the calendar.3Press Select, enter your to-do note and press Options.4Scroll to Save and press Select.5Scroll to High, Medium, or Low priority and press Select. The to-do note is saved.Options while viewing notesPress Options while viewing the header or body of a particular note and the following options appear in the display:
DRAFT[ 115 ]Menu functionsHeader view optionsFunction Body view optionsFunctionView View the body of a note.Edit Edit the content of a note.Add Add another note. Deadline Set a deadline for the note.Delete Delete the note. Mark note as doneMark a note or task as complete; no more reminders will follow.Sort by deadlineSort the notes according to their deadline.Delete Delete the note.Send Send the note as a text message.Edit priority Change the priority to high, medium, or low.Go to calendarLeave the to-do list and go to the calendar.Send Send the note as a text message.Save to calendarSave the to-do note to a date on your calendar.Go to calendarLeave the to-do list and go to the calendar.NA NA Save to calendarSave the to-do note to a date on your calendar.
DRAFT[ 116 ]Games (Menu 9) Not only can you use your phone for communication, but also for some serious fun. Your phone offers multiple games from which to choose.Note: Your phone must be switched on to use this function. Do not switch the phone on when wireless phone use is prohibited or when it may cause interference or danger. • LAUNCH A GAME1At the Start screen, press Menu 9 (Games). After a brief pause, the following list of game submenus appear in the display:Note: Some menus listed in the following table are network dependent. Contact your wireless provider for more information.2Scroll to a submenu. Press Select to enter the submenu and choose other settings.Submenu FunctionSelect game Select a game or enter a game option list. See “Game options” on page 117 for more info on game options.Game downloadsConnect to game downloads on the Internet using your xHTML browser.Memory Check the available memory for games and game related applications.Settings Turn game sounds, lights, and shakes on or off.
DRAFT[ 117 ]Menu functionsPlay a game1Press Menu 9-1 (Games > Select game). After a brief pause, a list of games appears in the display.2Scroll to a game and press h. If the selection is a single game it will launch. Otherwise, a list of games within the selected game set appears in the display. To launch a single game, scroll to the desired game and press h.3Choose one of the following options on the game submenu and press Select:• Choose New game to begin playing a new game.• Choose High score to view previous high scores.• Choose Instructions to get instructions for playing the game.Tip: If a game uses the whole display area, selection keys such as Options or Back will not appear in the display. Press e to show the options keys Select or Back (returns to the game).Game options• While viewing the games list, press Options to display those listed in the following table. Scroll to an option and press Select to activate the option or enter its submenu.Option FunctionOpen Play the game.Delete Delete the game.Web access Options for restricting network access.Check version Display the version of the highlighted game.Details Display details of the game.
DRAFT[ 118 ]Applications (Menu 10)With the applications menu you can manage the Java applications installed on your phone, or those that may be offered by your wireless provider. Note: The phone must be switched on to use this function. Do not switch on the phone when the use of a wireless phone is prohibited or when it may cause interference or danger.Note: This feature uses shared memory. Please see “Shared memory” on page 13 for more information. • LAUNCH AN APPLICATION1At the Start screen, press Menu 10-1 (Applications > Select application). After a brief pause, one or more applications appear in the display.2Scroll to an application or an application set and press Options, or press h.3If the selection is a single application it will be launched. Otherwise, a list of applications in the selected application set is displayed. • To launch a single application within the set, scroll to the desired application and press Options, then press Select or h.Application optionsWhile viewing the applications list, press Options to display those listed in the following table. Scroll to an option and press Select to activate the option or enter its submenu.
DRAFT[ 119 ]Menu functions • DOWNLOAD APPLICATIONSYou can download new Java applications in different ways.Use application downloads1At the Start screen, press Menu 10-2 (Applications > App. downloads). After a brief pause, the list of available xHTML bookmarks appears in the display.Note: This feature is network dependent. Contact your wireless provider for more information.2Scroll to More bookmarks (if necessary) and press Select to access the list of xHTML bookmarks in your Services menu.3Scroll to the appropriate bookmark that contains the application you wish to download, and press Select to connect to the xHTML page. Option FunctionOpen Opens the selected application or application set.Delete Delete the application or application set from your phone.Web access Provides options for restricting network access:Ask first (ask for network access)Allowed (allow network access)Not allowed (to not allow network access)Check version Check if a new version of the application is available for download.Web page Provides further information or data for the application from an Internet page; This feature is network dependent, and only appears if an Internet address has been provided with the application.Details Shows additional information about the application.
DRAFT[ 120 ]See “Navigate the wireless Internet” on page 138 for information on browsing xHTML pages.Use game downloads• At the Start screen, press Menu 9-2 (Games > Game services). After a brief pause, your phone connects to the xHTML pages using the currently active set of xHTML settings.Note: If the connection fails, you may enter the Services menu and activate another set of service settings. See “Use browser options” on page 137 for more info on browser settings.Use PC SuiteUse the Nokia Application Installer from PC Suite to install Java applications from the PC to the phone. For more information on PC Suite, see “Nokia PC Suite” on page 135.Note: Nokia does not warrant for applications from non-Nokia sites. If you choose to download Java applications from non-Nokia sites, take precautions for security or content.Note: When you download a game or an application, it may be saved in the Games menu instead of the Applications menu. • VIEW APPLICATION MEMORY STATUSYou can view the size of memory available for game and application installations.• At the Start screen, press Menu 10-3 (Applications > Memory). After a brief pause, the amount of free memory appears in the display.
DRAFT[ 121 ]Menu functionsExtras (Menu 11)With the Extras menu you can manage the calculator, voice recorder, voice commands, and synchronization features installed on your phone, or those that may be offered by your wireless provider. • USE THE CALCULATORThe calculator in your phone adds, subtracts, multiplies, divides, counts the square and the square root, and converts currency values.Note: Your phone must be switched on to use this function. Do not switch the phone on when wireless phone use is prohibited or when it may cause interference or danger.Note: Calculator has a limited accuracy and rounding errors may occur, especially in long division.1Press Menu 11-1 (Extras > Calculator). After a brief pause, the calculator screen appears in the display.2Enter the first number in the calculation. Press p for a decimal point if necessary.3Press s repeatedly to cycle through the add (+), subtract (-), multiply (*), and divide (/) characters. Pause briefly to select the currently displayed character.Note: To perform a square or square root calculation, press Options, scroll to Square or Square root and press Select. 4Enter the second number in your calculation.5Press Options. The equal sign is highlighted. Press Select. The result of your calculation appears in the display.
DRAFT[ 122 ] • USE THE CURRENCY CONVERTERYou can convert foreign currency to domestic, or vice versa directly from the Start screen.1At the Start screen, enter a currency amount to convert.2Press Options, scroll to one of the following and press Select:If you have not done so already, you are prompted to enter the exchange rate.3Enter the exchange rate and press OK. Press p to insert a decimal. The converted amount appears in the display.EDIT THE EXCHANGE RATE1At the Start screen, press Menu 11-1 (Extras > Calculator). After a brief pause, the calculator screen appears in the display.2Press Options (Exchange rate is highlighted), then press Select and scroll to one of the following options:3Press Select to edit your choice. 4Enter the exchange rate and press OK. The exchange rate is saved.To home Converts foreign currency to domestic currencyTo foreign Converts domestic currency to foreign currencyForeign units in home unitsEnter the number of home units it takes to make one unit of foreign currencyHome units in foreign unitsEnter the number of foreign units it takes to make one unit of your home currency
DRAFT[ 123 ]Menu functions • VOICE RECORDERThis feature allows you to record pieces of speech or sound with your phone and listen to them later. You can record information such as phone numbers and personal memos, but the voice recorder can also record an active phone conversation. The total available time is 90 seconds if no memos have been stored. The maximum length of a recording depends on how much memory remains available. The length of time remaining for a current recording will be displayed on your phone screen. Note: Obey all applicable laws governing recording of calls. Do not use this feature illegally.Record speech or sound1Press Menu 11-2 (Extras > Voice recorder)2After the recorder start tone is heard, begin recording speech or sound.3When you finish recording, select the Stop option.4Enter the title you wish to assign to the recording.Record while in a call1While in a call, press Options, then select Record.2After the recorder start tone is heard, the recorder begins recording the phone conversation. Also, the recorder recording tone will play every 5 seconds to remind the other person on the call that the conversation is being recorded. 3When recording is done, select the Stop option. View recording list and play recordings1You can view saved recordings by selecting the Recording list option. Press Menu 11-2-2 (Extras > Voice recorder > Recordings list). 2Once you are in the Recordings list, select the recording you would like to play, press Options, then select Playback. You can end the playback by selecting Stop.
DRAFT[ 124 ]Delete a recordingFrom the Recording list menu, select the recording you want to erase, press Options then select Delete. Edit a recording titleTo change the title of a recording, go to the Recording list option, select a recording, then select Options and choose Edit title.Setting the voice memo alarmYou can attach an alarm to a recording by going to the Recording list option, selecting a recording, and selecting Add alarm. • VOICE COMMANDSThe voice command feature allows handsfree operation of certain phone features. Voice commands work similar to voice dialing. Before using voice commands, you must first associate a “voice tag” to the phone function. You can set as many as 5 voice commands.View available functions Press Menu 11-3 (Extras > Voice commands) and scroll through the list of functions.Phone feature Feature optionsProfiles Normal, Silent, Meeting, Outdoor, and PagerVoice mailbox Check your voice messages.Radio Radio on, Radio off, Next channel, and Previous channelInfrared Activate infrared.Recorder Record speech or sound.Audible alerts Audible battery bar and Audible signal bar
DRAFT[ 125 ]Menu functionsAdd a voice tag for the command1Press Menu 11- 3 (Extras > Voice commands)2Scroll to the phone function you wish to tag, then press Select.3Press Options, then select Add command. 4Press Start, then speak the voice tag clearly into the microphone.Note: Do NOT press Quit unless you want to cancel the recording.The phone replays and then saves the recorded tag. The icon appears next to commands which have voice tags assigned.Activate a voice commandAfter you have associated a voice tag with a phone function, you can issue a command by speaking the voice tag. There are three ways to activate a voice command: 1If you have the optional headset attached, press and hold the headset button.OR• Press and hold Contacts.OR• Press and hold the volume down key.2When Please speak now appears, pronounce the voice tag clearly into the microphone. When the phone finds the tag, Found appears, and the phone plays the recognized voice tag from the phone memory through the earpiece. Work with an existing voice commandAfter you have associated a voice tag to a command, you can choose one of the following options:• Select Playback to listen to the voice command tag.• Select Change to change the voice command.• Select Delete to erase the voice command tag.
DRAFT[ 126 ] • AUDIBLE ALERTSAudible alerts provide you with the current signal bar or battery bar strength of your phone.Note: In order to obtain audible alerts, the alerts must first be set up as voice commands. To set up voice commands, see “View available functions” on page 124 and “Add a voice tag for the command” on page 125.Set up audible alerts1If you have the optional headset attached, press and hold the headset button.OR• Press and hold Contacts.OR• Press and hold the volume down key.2When Please speak now appears, pronounce the voice tag clearly into the microphone. When the phone finds the tag, Found appears, and the phone plays the recognized voice tag from the phone memory through the earpiece.The phone then beeps, according to the strengths indicated in the following table (and according to which voice command has been activated):Audible Alert One Beep Two Beeps Three beeps Four BeepsBattery Bar StrengthLow Half-full Almost full FullSignal Bar StrengthWeak Somewhat strongAlmost strongStrong
DRAFT[ 127 ]Menu functionsConnectivity (Menu 12)You can make a serial connection between your phone and a PC using the DKU-5 data cable, which is available for purchase as an enhancement. Once you establish this connection, you can access phone information from your PC, or use your phone as a wireless modem. It may also be possible to make this same serial connection between your phone and an Infrared-equipped laptop or IR-equipped desktop PC using the infrared port of your phone.Note: Your phone must be switched on to use this function. Do not switch the phone on when wireless phone use is prohibited or when it may cause interference or danger. •INFRAREDYou can set up the phone to receive data through its infrared (IR) port. To use an IR connection, transmission and reception must be to or from an infrared compatible phone or device. You can send or receive data such as business cards and calendar notes to or from a compatible phone or data device (such as a computer) through the IR port of your phone.Important: Do not point the IR (infrared) beam at anyone's eye or allow it to interfere with other IR devices.SEND AND RECEIVE DATA USING IR• Ensure that the IR ports of the sending and receiving devices are pointing at each other and that there are no obstructions between the devices. The preferable distance between the two devices in an infrared connection is from 3 inches to 3 feet. 3 ft. maximum distance
DRAFT[ 128 ]• Activate IR in your phone by pressing Menu 12-1 (Connectivity > Infrared) at the Start screen. • The user of the other device should activate IR as well.If data transfer is not started within two minutes after the activation of the IR port, the connection is cancelled and has to be started again.IR CONNECTION INDICATOR• When is shown continuously, the IR connection is activated and your phone is ready to send or receive data through its IR port.• When blinks, your phone is trying to connect to the other device or a connection has been lost.Using data communication applicationsFor information on using a data communication application, refer to the documentation provided with the application.If you use an IR connection:• Activate the IR connection in your phone by pressing Menu 12-1 (Connectivity > Infrared). Also, make sure that the connection is active in your PC.If you use the DKU-5 data cable:1Connect the cable to the USB port on the back of your computer and to the connector on your phone.2Start using the data communications application on the computer.Note: Making or answering phone calls during a computer connection is not recommended as it might disrupt the operation.• For better performance during data calls, place the phone on a stationary surface with the keypad facing downward. Do not move the phone by holding it in your hand during a data call.
DRAFT[ 129 ]Menu functions •(E)GPRSEnhanced General Packet Radio Service or (E)GPRS is a technology used to send and receive data in short bursts or packets over the wireless network. With (E)GPRS, you can stay connected to the Internet and allow faster downloads without completing a dial-up connection. Applications using (E)GPRS include the xHTML browser, text messaging, and dial-up connections for making digital data calls.Enhanced General Packet Radio Service or (E)GPRS may also be available. (E)GPRS works just like GPRS, but the connection is roughly 2-3 times faster.Note: In order to use (E)GPRS for dial-up connections, you must first subscribe to the (E)GPRS network service. Contact your service provider for details on pricing and availability.Some service providers may have already set up information for your (E)GPRS dial-up connection. (E)GPRS dial-up connectionsWhen you use your Nokia phone as a wireless modem, you have the option of enabling (E)GPRS connectivity from your PC or laptop computer. For more information, see the Nokia PC Suite and PC/PDA Connectivity Guide. This document can be downloaded from the Nokia website at http://www.nokia.com/us.(E)GPRS iconsThe following icons appear on the screen to show you the status of your (E)GPRS connection.Appears in the upper left corner of the screen. Indicates an active (E)GPRS connection, for example, when you are using the xHTML browser.
DRAFT[ 130 ]Set up an automatic connectionSome service providers may have customized the options on the Services menu. Contact your service provider for more information if the options shown here are not available.Important: (E)GPRS may not be available in all wireless networks. The establishment and continuation of a (E)GPRS and Internet connection depends on network availability, service provider support, and signal strength.You can choose one of the following options for your (E)GPRS connection.1At the Start screen, press Menu 12-2-1 (Connectivity > GPRS > GPRS connection). After a brief pause, the following options appear in the display.2Scroll to an option and press Select to activate the option.•When needed—the (E)GPRS connection is established when you use the xHTML browser and is closed when you exit the xHTML browser. •Always online—the phone is automatically registered to a (E)GPRS network when you turn your phone on. When you use the xHTML browser, the connection between your phone and the network is created and data transfer is possible. When you exit the xHTML browser, the (E)GPRS connection ends but the registration to the (E)GPRS network remains. Appears in the upper left corner of the screen. Indicates you are registered to a (E)GPRS network but the (E)GPRS connection is not currently active.Indicates that circuit switched (CS) or voice calls are not possible when using (E)GPRS.Indicates that the (E)GPRS connection has been interrupted by a voice call.
DRAFT[ 131 ]Menu functionsReceive a call while onlineIf you are using the xHTML browser over (E)GPRS, you can still receive a voice call. Your data call is put on hold and you can choose to answer the call.• To answer the incoming call, press h. • To reject the incoming call, press i. Note: After you end your voice call, the (E)GPRS connection automatically resumes.Make a call while onlineWhen you are browsing an xHTML page and want to make a call, you can select Use number. Your phone searches the information on the xHTML page for a string of numbers. You then choose from the number or numbers displayed to place the call.An alternate way is to press i to disconnect from the Internet, then place your call by searching the contacts list for a name and number or by keying in the phone number. Make an emergency call while onlineIf you are using (E)GPRS to connect to the Internet, you can end your data connection and then make an emergency call. 1To close your Internet connection, simply press i.2Enter the emergency number for your present location (for example, 911 or any other official emergency number—emergency numbers vary by location).3Press h. • SYNCHRONIZEYou can synchronize the calendar and contacts list data in your phone with a remote Internet server or a compatible PC. Note: The contacts list in your SIM card will not be synchronized.
DRAFT[ 132 ]Note: This feature must be supported by your wireless service provider. For more information on availability and synchronization service settings, contact your service provider.Save synchronization settingsYou may receive the synchronization settings as a text message or may need to enter the synchronization settings manually. If you do not receive the synchronization setting as a text message, see “Save settings manually” below for more information. SAVE SETTINGS WHEN RECEIVED AS A TEXT MESSAGEWhen you receive the synchronization settings as a text message, Synchronization settings received is displayed.•Press Options and select:•Details to view the received settings first.•Save to save the synchronization settings.•Discard to discard the synchronization settings.SAVE SETTINGS MANUALLYYou need to activate the set where you want to save the synchronization settings. A set is a collection of settings required to make a connection to a service.1At the Start screen, press Menu 12-3-2-1 (Connectivity > Synchronize > Settings > Active synch. settings).2Scroll to the set you wish to activate and press Activate.Select Custom. active Internet sync. settings. Select each setting from the following table and key in the required settings.Settings name Rename the synchronization setting and press OK.Data to be synchronizedSelect All (phone book and calendar), Phone book, or Calendar and press Done.
DRAFT[ 133 ]Menu functionsSynchronize from your phoneIf you have saved data in the remote Internet server, you can synchronize your phone by starting the synchronization from your phone. Once you have customized and selected the appropriate synchronization settings, you are ready to synchronize data. (See “Save synchronization settings” on page 132 or “Save settings manually” on page 132 for more information.)1At the Start screen, press Menu 13-5-1 (Services > Settings > Active service settings). Select the connection settings you need for synchronization.Note: The synchronization settings may differ from the service settings required for xHTML browsing. After synchronizing, change your Active service settings back to the previous ones if you want to use other xHTML services later.2Mark the data to be synchronized. (See “Save settings manually” on page 132 for more information.)3At the Start screen, press Menu 12-3-1 (Connectivity > Synchronize > Synchronize). Synchronization begins. Database addresses Select Phone book database and/or Calendar database, key in the name of the database, and press OK.User name Key in the user name and press OK. (Contact your service provider, if necessary, for this information.)Password Key in the password and press OK. (Contact your service provider, if necessary, for this information.)Synchronization serverKey in the name of the server and press OK.
DRAFT[ 134 ]Depending on the type of connection you are using to synchronize data, connecting or initializing messages may appear.Note: Synchronizing for the first time or after an interrupted synchronization may take time up to 30 minutes, if the contacts list or calendar are full.STOP SYNCHRONIZATION1To stop synchronization press Quit or i. The Quit synchronization? message appears.2Press OK. HANDLING CALLS DURING SYNCHRONIZATIONDuring synchronization, outgoing calls are not possible. Incoming calls can still be received, and can be handled in one of the following ways:• To reject the incoming call, press i (synchronization continues)• To answer the incoming call, press h (synchronization is interrupted and a Synchronization suspended message appears)Note: Once the incoming call is ended, a Start synchronization again? message appears. Selecting Yes starts synchronization over again, from the beginning.Synchronize from your PCYou can synchronize the data in your phone’s contact list and calendar to correspond with the data of your PC by starting the synchronization from your PC.To synchronize the contact list and calendar from your PC, use either an IR connection or a data cable. You also need the PC Suite software of your (See “Nokia PC Suite” in the next section for details.)Start the synchronization from your PC using PC suite. After synchronizing, the data in the phone and in the PC are the same.
DRAFT[ 135 ]Menu functions • NOKIA PC SUITEOnce your phone is connected to your PC, you can use the following features of Nokia PC Suite:•Nokia Application Installer allows you to install Java applications from your PC to your phone.•Nokia Image Converter allows you to convert and optimize graphics for use in MMS messages or for creating desktop wallpaper for your phone.•Nokia Sound Converter allows you to convert General MIDI files for use with MMS messages and as ringing tones for your phone.•Nokia Content Copier allows you to copy data between two Nokia phones, backup your phone’s data to your PC (then restore the data back to your phone), and erase data from your phone.•Nokia Connection Manager allows you to monitor the serial connection between your phone and PC and switch to a different type of connection (cable, IR, Bluetooth) when copying data from one phone to another.•Nokia Phone Editor allows you to edit your phone book and settings from your PC.•Nokia PC Sync allows you to synchronize contacts, calendar, and to-do list items between your phone and PIM applications such as Microsoft Outlook and Lotus Organizer.•Nokia Phone Browser allows you to browse the contents of your phone using Windows Explorer or My Computer.•Nokia WAP Manager allows you to manage WAP bookmarks and settings.For more information, refer to the Nokia PC Suite and PC/PDA Connectivity Guide for installation and setup instructions.Note: The Nokia PC Suite and PC/PDA Connectivity Guide, Nokia PC Suite, and all related software can be downloaded from the U.S. Mobile Phone products section of www.nokia.com/us.
DRAFT[ 136 ]Services (Menu 13)Your phone has a built-in browser you can use to connect to selected services on the Internet. You can view weather reports, check news or flight times, view financial information, and much more.Note: This feature is network dependent. Contact your wireless provider for more information.Note: Your phone must be switched on to use this function. Do not switch the phone on when wireless phone use is prohibited or when it may cause interference or danger. • NOTES ON WIRELESS INTERNET ACCESSThis section gives a brief overview of wireless Internet technology.Technology backgroundXHTMLA technology called HyperText Markup Language (xHTML) is to mobile devices what the World Wide Web (WWW) is to personal computers. xHTML is a relatively new development that provides access to the Internet for mobile users.Today, most xHTML sites are made up of text and hyperlinks. Some pages even contain low-resolution graphics, or require data input. Your service provider and others are free to design xHTML sites as they choose, so the sites are as variable as Web pages on the Internet.Internet content on your personal computer is called a “web page.” Internet content on your mobile phone is called a “page,” or “xHTML card.” The wireless provider’s roleBecause wireless Internet content is designed to be viewed from your phone, your wireless provider now becomes your “wireless Internet service provider” as well.
DRAFT[ 137 ]Menu functionsYour wireless provider has probably created a home page and set up your browser to go to this page when you log on to the Internet. Once at your service provider’s home page, you may find links to a number of other sites.Set up for browsingIt should not be necessary to manually configure the browser on your phone. Normally this is done by your wireless provider once you have subscribed to the feature. Contact your wireless provider if you have problems using the browser. • SIGN ON TO THE WIRELESS INTERNETNote: Your phone must be switched on to use this function. Do not switch the phone on when wireless phone use is prohibited or when it may cause interference or danger.•Press Menu 13-1 (Services > Home). After a brief pause, your phone attempts to connect to your wireless provider’s home page.OR• At the Start screen, press and hold 0.Your phone connects to the Internet and to your service provider’s home page.If you see the Check service settings message, the phone may not be set up for browsing. Contact your wireless provider to make sure that your phone is configured properly. • USE BROWSER OPTIONSThe Services menu gives you the options shown in the following table. Some wireless providers may have customized the options on the Services menu. Contact your wireless provider for more information if any of the options shown in the following table are not available.
DRAFT[ 138 ] • NAVIGATE THE WIRELESS INTERNETSince your phone screen is much smaller than a computer screen, Internet content is displayed differently than you may be accustomed to seeing. This section contains guidelines for using phone keys to navigate a xHTML site and examples of how to read an xHTML site.General guidelines for using the phone keys• Use the four-way scroll keys to browse the xHTML site. • To select a highlighted item, press h.• To enter letters and numbers, press the keys 0 through 9.• To enter special characters, press the s key.Choice What it doesHome Starts the browser and takes you to your service provider’s home page.Bookmarks Shows a list of all saved bookmarks. Bookmarks help you find an xHTML site quickly. Download linksAllows you to download content from pre-programmed xHTML sites.Service inboxAllows you to receive notifications from your service provider about new e-mail messages, changes in stock prices, and so on.Settings Provides options for changing connection settings, appearance settings, cookie settings, and certificates. Go to addressAccepts an address you enter.Clear the cacheEmpties the browser’s temporary memory. It is advisable to empty the cache at the end of each session.
DRAFT[ 139 ]Menu functionsExamples of wireless Internet sitesThe following illustrations show most of the elements you may find on a wireless Internet site. These are examples only. 1) Header line: shows the current Internet site.2) Active link: appears as a highlighted word.3) Inactive link: appears as an underlined word.Scroll through the list of links using d or g.4) Selection list: Brackets [ ] appear when you have the option to enter information.5) Options: Press Options to go to the site menu and/or browser page.6) Back: Press Back to return to the previous page.7) Data entry field: Brackets [ ] that enclose dots indicate when you need to enter information. In this example, you can enter your zip code to receive the local weather forecast.1)2)3)5) 6)4)7)
DRAFT[ 140 ] • USE BOOKMARKSYou can save addresses for your favorite sites as bookmarks. A bookmark helps you find a site again, just as a slip of paper helps you find a page in a book. You can add up to 30 bookmarks to your browser.Set a bookmark while browsing1Press Menu 13-2 (Services > Bookmarks). After a brief pause, a list of bookmarks (if any) appear in the display.2Press Options, scroll to New bookmark (if necessary), and press Select.3Enter an address for the bookmark and press OK.4Enter a title for the bookmark and press OK. A message appears in the display confirming your bookmark is saved.Disconnect from the Internet• To quit browsing and end the connection, press Options and select Quit. When the Quit browsing? message appears, press Yes.OR•Press i. If GSM data is the selected data bearer, then press i twice. • SECURITY ISSUESNote: The information or services you have accessed are stored in the cache of your phone. A cache is a buffer memory, which is used to store data temporarily. If you tried to access or have accessed confidential information requiring passwords (for example, your bank account), empty the cache of your phone after each use.CLEAR THE CACHE1Press Menu 13 (Services). After a brief pause, a list of options appear in the display.ORIf browsing, press Options.
DRAFT[ 141 ]Menu functions2Scroll to Clear the cache and press Select.About authority certificatesTo use some xHTML services, such as banking services, you need an authority certificate. Using the certificate can help you to improve the security of connections between your phone and an xHTML server.You can download the certificate from an xHTML page if the xHTML service supports the use of authority certificates. After the download, you can view the certificate, then save or delete it. If you save the certificate, it is added to the list of certificates in the phone.Your phone alerts you if the identity of the xHTML server or xHTML gateway cannot be verified or is not authentic.VIEW THE LIST OF AUTHORITY CERTIFICATES1Press Menu 13-5-5-2 (Services > Settings > Certificates > Authority Certificates). After a brief pause, a list of settings appears in the display.2Scroll to Certificate list and press Select. The list of authority certificates is displayed.
DRAFT[ 142 ]9 Reference informationThis section provides information about your phone’s batteries, enhancements, chargers, safety guidelines, and technical information. Be aware that the information in this section is subject to change as batteries, chargers, and enhancements change.Check the model number of any charger before use with this device. This device is intended for use when supplied with power from ACP-12 and LCH-9.Warning: Use only batteries, charters, and enhancements that have been approved by the phone manufacturer. The use of any other types could invalidate any approval or warranty applying to the phone and could be dangerous.For availability of approved enhancements, please check with your dealer. • BATTERY STATEMENTSCharging and DischargingYour phone is powered by a rechargeable battery.Note that a new battery's full performance may be achieved only after two or three complete charge and discharge cycles!The battery can be charged and discharged hundreds of times but it will eventually wear out. When the operating time (talk time and standby time) is noticeably shorter than normal, it is time to buy a new battery.Use only batteries approved by the phone manufacturer and recharge your battery only with the chargers approved by the manufacturer. Unplug the charger when not in use. Do not leave the battery connected to a charger for longer than a week, since overcharging may shorten its lifetime. If left unused, a fully charged battery will discharge itself over time.
DRAFT[ 143 ]Reference informationTemperature extremes can affect the ability of your battery to charge; allow it to cool down or warm up first.Use the battery only for its intended purpose.Never use any charger or battery which is damaged or worn out.Do not short-circuit the battery. Accidental short-circuiting can occur when a metallic object (coin, clip, or pen) causes direct connection of the + and - terminals of the battery (metal strips on the battery), for example, when you carry a spare battery in your pocket or purse. Short-circuiting the terminals may damage the battery or the connecting object.Leaving the battery in hot or cold places, such as in a closed car in summer or winter conditions, will reduce the capacity and lifetime of the battery. Always try to keep the battery between 59°F and 77°F (15°C and 25°C). A phone with a hot or cold battery may temporarily not work, even when the battery is fully charged. Batteries' performance is particularly limited in temperatures well below freezing.Do not dispose of batteries in a fire!Dispose of batteries according to applicable local regulations (for example, recycling). Do not dispose of as household waste. • USE PROPER CARE AND MAINTENANCEYour phone is a product of superior design and craftsmanship and should be treated with care. The suggestions below will help you to fulfill any warranty obligations and to enjoy this product for many years:• Keep the phone and all its parts and enhancements out of the reach of small children.• Keep the phone dry. Precipitation, humidity and all types of liquids or moisture can contain minerals that will corrode electronic circuits.• Do not use or store the phone in dusty, dirty areas. Its moving parts can be damaged.• Do not store the phone in hot areas. High temperatures can shorten the life of electronic devices, damage batteries, and warp or melt certain plastics.
DRAFT[ 144 ]• Do not store the phone in cold areas. When it warms up (to its normal temperature), moisture can form inside which may damage electronic circuit boards.• Do not attempt to open the phone. Nonexpert handling may damage it.• Do not drop, knock, or shake the phone. Rough handling can break internal circuit boards.• Do not use harsh chemicals, cleaning solvents, or strong detergents to clean the phone.• Do not paint the phone. Paint can clog the moving parts and prevent proper operation.• Use only the supplied or an approved replacement antenna. Unauthorized antennas, modifications, or attachments could damage the phone and may violate regulations governing radio devices.All of the above suggestions apply equally to your phone, battery, charger or any enhancement. If any of them are not working properly, take them to your nearest qualified service facility. The personnel there will assist you, and if necessary, arrange for service. • UNDERSTAND IMPORTANT SAFETY INFORMATIONTraffic SafetyDo not use a handheld telephone while driving a vehicle. Always secure the phone in its holder; do not place the phone on the passenger seat or where it can break loose in a collision or sudden stop.Remember road safety always comes first!Operating environmentRemember to follow any special regulations in force in any area and always switch off your phone whenever it is forbidden to use it, or when it may cause interference or danger.Use the phone only in its normal operating positions.
DRAFT[ 145 ]Reference informationElectronic devicesMost modern electronic equipment is shielded from radio frequency (RF) signals. However, certain electronic equipment may not be shielded against the RF signals from your wireless phone.PACEMAKERSPacemaker manufacturers recommend that a minimum separation of 6 inches (20 cm) be maintained between a handheld wireless phone and a pacemaker to avoid potential interference with the pacemaker. These recommendations are consistent with the independent research by and recommendations of Wireless Technology Research. Persons with pacemakers:• Should always keep the phone more than 6 inches (20 cm) from their pacemaker when the phone is switched on• Should not carry the phone in a breast pocket• Should use the ear opposite the pacemaker to minimize the potential for interference.• If you have any reason to suspect that interference is taking place, switch off your phone immediately.HEARING AIDSSome digital wireless phones may interfere with some hearing aids. In the event of such interference, you may want to consult your service provider.Other medical devicesOperation of any radio transmitting equipment, including cellular phones, may interfere with the functionality of inadequately protected medical devices. Consult a physician or the manufacturer of the medical device to determine if they are adequately shielded from external RF energy or if you have any questions. Switch off your phone in health care facilities when any regulations posted in these areas instruct you to do so. Hospitals or health care facilities may be using equipment that could be sensitive to external RF energy.
DRAFT[ 146 ]VehiclesRF signals may affect improperly installed or inadequately shielded electronic systems in motor vehicles (for example, electronic fuel injection systems, electronic antiskid/antilock braking systems, electronic speed control systems, air bag systems). Check with the manufacturer or its representative regarding your vehicle. You should also consult the manufacturer of any equipment that has been added to your vehicle.Posted facilitiesSwitch your phone off in any facility where posted notices so require.Potentially explosive atmospheresSwitch off your phone when in any area with a potentially explosive atmosphere and obey all signs and instructions. Sparks in such areas could cause an explosion or fire resulting in bodily injury or even death.Users are advised to switch off the phone when at a refueling point (service station). Users are reminded of the need to observe restrictions on the use of radio equipment in fuel depots (fuel storage and distribution areas), chemical plants, or where blasting operations are in progress.Areas with a potentially explosive atmosphere are often but not always clearly marked. They include below deck on boats; chemical transfer or storage facilities; vehicles using liquefied petroleum gas (such as propane or butane); areas where the air contains chemicals or particles, such as grain, dust, or metal powders; and any other area where you would normally be advised to turn off your vehicle engine.VehiclesOnly qualified personnel should service the phone or install the phone in a vehicle. Faulty installation or service may be dangerous and may invalidate any warranty which may apply to the unit.Check regularly that all wireless phone equipment in your vehicle is mounted and operating properly.Do not store or carry flammable liquids, gases, or explosive materials in the same compartment as the phone, its parts, or enhancements.
DRAFT[ 147 ]Reference informationFor vehicles equipped with an air bag, remember that an air bag inflates with great force. Do not place objects, including both installed or portable wireless equipment in the area over the air bag or in the air bag deployment area. If in-vehicle wireless equipment is improperly installed and the air bag inflates, serious injury could result.FCC regulations prohibit using your phone while in the air. Switch off your phone before boarding an aircraft. The use of wireless telephones in an aircraft may be dangerous to the operation of the aircraft, disrupt the wireless telephone network, and may be illegal.Failure to observe these instructions may lead to suspension or denial of telephone services to the offender, legal action, or both. • EMERGENCY CALLSImportant: This phone, like any wireless phone, operates using radio signals, wireless, and landline networks as well as user-programmed functions. Because of this, connections in all conditions cannot be guaranteed. Therefore you should never rely solely upon any wireless phone for essential communications (for example, medical emergencies).Emergency calls may not be possible on all wireless phone networks or when certain network services and/or phone features are in use. Check with local service providers.To make an emergency call:1If the phone is not on, switch it on. Check for adequate signal strength.Note: Some networks may require that a valid SIM card is properly inserted in the phone.2Press i as many times as needed (for example, to exit a call, to exit a menu, etc.) to clear the display and ready the phone for calls. 3Key in the emergency number for your present location (for example, 911 or other official emergency number). Emergency numbers vary by location.
DRAFT[ 148 ]4Press the h key.If certain features are in use, you may first need to turn those features off before you can make an emergency call. Consult this user guide and your local cellular service provider.When making an emergency call, remember to give all the necessary information as accurately as possible. Remember that your wireless phone may be the only means of communication at the scene of an accident - do not end the call until given permission to do so. • CERTIFICATION INFORMATIONTHIS MODEL PHONE MEETS THE GOVERNMENT’S REQUIREMENTS FOR EXPOSURE TO RADIO WAVES.Your wireless phone is a radio transmitter and receiver. It is designed and manufactured not to exceed the emission limits for exposure to radio frequency (RF) energy set by the Federal Communications Commission of the U.S. Government. These limits are part of comprehensive guidelines and establish permitted levels of RF energy for the general population. The guidelines are based on standards that were developed by independent scientific organizations through periodic and thorough evaluation of scientific studies. The standards include a substantial safety margin designed to assure the safety of all persons, regardless of age and health. The exposure standard for wireless mobile phones employs a unit of measurement known as the Specific Absorption Rate, or SAR. The SAR limit set by the FCC is 1.6W/kg.* Tests for SAR are conducted using standard operating positions accepted by the FCC with the phone transmitting at its highest certified power level in all tested frequency bands. Although the SAR is determined at the highest certified power level, the actual SAR level of the phone while operating can be well below the maximum value. This is because the phone is designed to operate at multiple power levels so as to use only the power required to reach the network. In general, the closer you are to a wireless base station antenna, the lower the power output.
DRAFT[ 149 ]Reference informationBefore a phone model is available for sale to the public, it must be tested and certified to the FCC that it does not exceed the limit established by the government-adopted requirement for safe exposure. The tests are performed in positions and locations (for example, at the ear and worn on the body) as required by the FCC for each model. The highest SAR value for this model phone as reported to the FCC when tested for use at the ear is 0.91 W/kg, and when worn on the body, as described in this user guide, is 0.77 W/kg. (Body-worn measurements differ among phone models, depending upon available enhancements and FCC requirements). While there may be differences between the SAR levels of various phones and at various positions, they all meet the government requirement.The FCC has granted an Equipment Authorization for this model phone with all reported SAR levels evaluated as in compliance with the FCC RF exposure guidelines. SAR information on this model phone is on file with the FCC and can be found under the Display Grant section of http://www.fcc.gov/oet/fccid after searching on FCC ID LJP NPL-3. For body worn operation, this phone has been tested and meets the FCC RF exposure guidelines for use with an enhancement that contains no metal and that positions the handset a minimum of 7/8 inch (2.2 cm) from the body. Use of other enhancements may not ensure compliance with FCC RF exposure guidelines. If you do not use a body-worn enhancement and are not holding the phone at the ear, position the handset a minimum of 7/8 inch (2.2 cm) from your body when the phone is switched on.*In the United States and Canada, the SAR limit for mobile phones used by the public is 1.6 watts/kilogram (W/kg) averaged over one gram of tissue. The standard incorporates a substantial margin of safety to give additional protection for the public and to account for any variations in measurements. SAR values may vary depending on national reporting requirements and the network band. For SAR information in other regions please look under product information at http://www.nokia.com/us.
DRAFT[ 150 ] • BATTERY INFORMATION This section provides information about the phone’s battery. Be aware that the information in this section is subject to change.Note: Dispose of used batteries in accordance with any local regulations.The tables shown in this section provide information about battery options that are available for your phone, charging times with the Travel Charger (ACP-12), the Rapid Travel Charger (ACP-8), the Standard Travel Charger (ACP-7), talk times, and standby times. Consult your service provider for more information.Charging timesThe following charging times are approximate: Talk and standby timesOperation times are estimates only and depend on signal strength, phone use, network conditions, features used, battery age and condition (including the effect of charging habits), temperatures to which the battery is exposed, and many other factors. The amount of time a phone is used for calls will affect its standby time. Likewise, the amount of time that the phone is turned on and in standby mode will affect its talk time.Charger Options ACP-12 ACP-8 ACP-7BLD-3 780 mAh Li-Ion battery Up to 1.5 h Up to 2 h Up to 3 h Talk/Standby Time 850 1800 1900Talk time 2.5 h 4 h 3.5 hTalk time with Speakerphone 2 h 2.5 h 3 hRadio and Headset standby time 28.5 hRadio and Speakerphone standby time 6.4 hStandby time 18 d
DRAFT[ 151 ]Reference information • ENHANCEMENTS If you want to enhance your phone’s functionality, a range of enhancements is available for you. You can select any of these items to help accommodate your specific communication needs. Use enhancements safelyA few practical rules for enhancement operation:• Keep all enhancements out of the reach of small children.• When you disconnect the power cord of any enhancement, grasp and pull the plug, not the cord.• Check regularly that any vehicle-installed enhancements are mounted and are operating properly.• Installation of any complex car enhancements must be made by qualified personnel only.• Use only batteries, charters, and enhancements that have been approved by the phone manufacturer. The use of any other types could invalidate any approval or warranty applying to the phone and could be dangerous.780 mAh Li-Ion Battery (BLD-3)Provides up to 4 hours of talk time and up to 3 hours of talk time with the speakerphone.For information on the phone’s battery (including talk, standby, and charging times), see “Battery information” on page 150.
DRAFT[ 152 ]Mobile Charger (LCH-12)The mobile charger quickly charges the phone battery from your vehicle.Also available:Rapid Cigarette Lighter Charger (LCH-9)Travel Charger (ACP-12)This lightweight ac charger can be used with all battery options. To use the charger, plug it into a standard 120V ac wall outlet, and connect the lead from the charger to the base of your phone. Calls can be made during charging, even with a fully discharged battery. Also available: Standard Travel Charger (ACP-7)Rapid Travel Charger (ACP-8)Headset Kit (HDB-4)New over-the-ear design concept boom headset is small, lightweight, and provides excellent audio quality.Also available:Stereo Headset (HDS-3)Headset (HS-5)
DRAFT[ 153 ]Reference informationCamera Headset (HS-1C)The camera headset allows you to take single-shot pictures from a small camera which is mounted on the headset. The camera is powered by the Pop-portTM connector on the bottom of your phone, and you use the functions in your phone to store, send, or delete pictures. The microphone on the camera and the answer/end button on the headset allow you to conveniently use your phone while snapping pictures.Loopset (LPS-4)With the Nokia Loopset, people who use a -Toil equipped hearing aid have the freedom to talk on a digital mobile phone. The loopset goes around your neck—so it can be worn comfortably and discreetly. Data Cable (DKU-5)For e-mail, faxes, Internet and data transmissions. Easy and convenient connection with no modem or PC card needed.TTY/TDD Adapter (HDA-10)The TTY/TDD adapter is a Nokia enhancement that allows you to connect your mobile phone to a Telecommunications Device for the Deaf (TTY/TDD) to make a call in digital mode.
DRAFT[ 154 ]Complete Car Kit (CARK-143)The Complete Car Kit is a complete hands-free solution for your vehicle.Also available: Handsfree Headrest (BHF-1)Mobile Holder (MBC-15S)RF-Coupler (AXF-15S)Connectivity Desk Stand(DCV-14)The desktop charging stand is an economical choice when you need your phone close at hand, always ready for calls.Also available:Battery Charging Stand (DDC-1)Music Stand (DT-1)The music stand is a convenient way to listen to the radio or speaker in your phone. The music stand has two, full- range speakers and a built-in stereo amplifier. The microphone, answer/end button, and volume control key all enhance the convenience and handsfree method of using your Nokia phone. The music stand also has a built-in charger.
DRAFT[ 155 ]Reference information • FREQUENTLY ASKED QUESTIONSThis section lists answers to the most frequently asked questions. Some of the answers contain menu shortcuts. For a list of shortcuts, see “Menu shortcuts” on page 15.Q. What is my security code?A. The default security code is 12345. However, Nokia recommends that you change this code immediately. Certain features can be used only after the correct security code has been successfully entered.Q. How do I lock and unlock the keypad?A. Lock the keypad by pressing Menu s. To unlock the keypad, press Unlock s.Q. How do I make the phone ring louder?A. Press Menu 3 (Profiles), and scroll through the list of profiles until you find the one for which you want to set the ringing volume. Then press Select.• Scroll to Customize and press Select.• Scroll to Ringing volume and press Select.• Scroll to the volume level of your preference and press Select.Q. How do I change the ringing tone?A. Press Menu 3 (Profiles) and scroll through the list of profiles until you find the one for which you want to set the ringing tone. Then press Select.• Scroll to Customize and press Select.• Scroll to Ringing tone, and then press Select. • Scroll through the options. After you hear the tone you want to use, press Select.
DRAFT[ 156 ]Q. How do I store my voice mailbox number?A. Press Menu 01-3-2 (Messages > Voice messages > Voice mailbox number). Enter your voice mailbox phone number, and press OK.Q. How do I call my voice mailbox number (retrieve voice messages)?A. When your phone alerts you to new voice messages, press Listen and follow the instructions on the phone. If you would rather listen to your messages later, press Exit.To listen to your voice messages at a later time, perform one of the following actions:• Press and hold 1.•Press Menu 01-3-1 (Messages > Voice messages > Listen to voice messages). Follow the recorded voice prompts to listen to your messages.Q. How do I redial the last-dialed number?A. Press h twice.Q. How do I assign a key to 1-touch dialing?A. First, you must verify that 1-touch dialing is activated:•Press Menu 4-3-4 (Settings > Call settings > 1-touch dialing). • After a brief pause, On and Off appear in the display.• Scroll to On and press Select.Then you can assign a key to 1-touch dialing:•Press Contacts and scroll to 1-touch dialing.•Press Select.• Scroll to the first (empty) slot and press Assign.• Enter or retrieve the name/number you want to assign to the key and press OK. Repeat these steps as many times as necessary.
DRAFT[ 157 ]Reference informationQ. How do I check the contacts list memory status?A. Press Contacts, scroll to Settings, and press Select. Scroll to Memory status and press Select. Scroll to Phone or SIM card and press Select. The memory status for your selection appears in the display.Q. How do I find my phone’s Model number and IMEI number?A. The model number and IMEI numbers are located on a label under the phone battery. Turn your phone off, remove the back cover and then remove the battery from the phone.Q. How do I clear my call timers?Important: Clearing call timers cannot be undone.A. Press Menu 2-5-5 (Call log > Call timers > Clear timers). When the security code prompt appears, enter your security code and press OK.
DRAFT[ 158 ] • GLOSSARYBusiness card A business card is the same as an entry in the contacts list. It may contain a name, phone number, and text entry. It can also be sent to other devices.Call forwarding A network services feature you use to forward incoming calls to another number. Call lists A list used to track numbers for incoming, outgoing, or missed calls.Call log A log that registers information about calls you make and receive. Call timers Timers used to track the amount of time you spend on calls.Call waiting A network services feature that enables your phone to beep while you are in the middle of a call. The beep lets you know that someone else is calling you.Gallery A menu within your phone that stores downloaded images and tones.International Mobile Equipment Identifier (IMEI) The identification number that is assigned to the phone. This number is located on the type label, located underneath the battery.In-call options Features available for use while you are in a call.Keyguard Locks the keypad to prevent accidental key presses.Keypad tones The tone you hear when you press a key.Menu A list of choices you can make to change settings on your phone or use various phone features.
DRAFT[ 159 ]Reference informationMultimedia messagesA message that contains a combination of text, images, or MIDI tonesPredictive text A method of entering information in your phone that uses a dictionary to predict, or guess, what you are writing. Profile A group of settings you can use to customize the way your phone works.Quick save A fast method for saving a number. Ringing tone The sound your phone makes when you receive a call. Ringing tones can be ringing sounds or short tunes. Scroll bar A bar that appears on the right side of the screen when you scroll through the main menus.Start screen Your phone’s idle screen.Voice mail A network services feature that enables people who call and miss you to leave a voice message on your phone. Warning tones Sounds your phone makes during error conditions, during confirmations, when the battery is low, and when you need to recharge the battery.
DRAFT[ 160 ] • TECHNICAL INFORMATIONFeature SpecificationWeight 3.2 oz. (92 grams) with BLD-3 780 mAh Li-Ion batteryWireless networks GSM 850, 1800, and 1900 networksSize (volume) 4.6 cubic inches (75 cubic centimeters)Frequency range (Tx) GSM 850: 824-849 MHzGSM 1800: 1710-1785 MHzGSM 1900: 1850-1910 MHzFrequency range (Rx)GSM 850: 869-894 MHzGSM 1800: 1805-1880 MHzGSM 1900: 1930-1990 MHzTx output power 2 W (GSM 850 max)1 W (GSM 1800/GSM 1900 max)Battery voltage 3.7 VdcOperating temperature +14°F to +131°F (-10°C to +55°C)Number of channels GSM 850: 124GSM 1800: 374 GSM 1900: 299Memory locations Up to 500 in phone memory
DRAFT[ 161 ]Reference information • TROUBLESHOOTINGProblem Possible cause Possible solutionMy phone is not chargingThe charger and phone are not properly connected.Securely connect the charger to the phone.The charger is not properly plugged into the wall.Ensure the charger is plugged in correctly.My phone is not making/receiving callsThe battery is not charged. Charge the battery.The signal strength is poor. If you are indoors, move toward a window.I cannot listen to my voice messagesYou do not have voice mail service.Call your wireless provider.You have not setup your voice mail service with your wireless provider.Call your wireless provider.You have not saved your voice mail number to your phone.See “Save your voice mailbox number” on page 69.You have forgotten your password or are entering it incorrectly.Call your wireless provider.The voice mail number you have saved to your phone is incorrect.Call your wireless provider.When I insert my SIM card into another phone, it is rejectedFixed dialing is activated on your SIM card and the receiving phone does not support fixed dialing.Deactivate fixed dialing on the SIM.
DRAFT[ 162 ] • Nokia ONE-YEAR LIMITED WARRANTY Nokia Inc. (“Nokia”) warrants that this cellular phone (“Product”) is free from defects in material and workmanship that result in Product failure during normal usage, according to the following terms and conditions:1The limited warranty for the Product extends for ONE (1) year beginning on the date of the purchase of the Product. This one year period is extended by each whole day that the Product is out of your possession for repair under this warranty.2The limited warranty extends only to the original purchaser (“Consumer”) of the Product and is not assignable or transferable to any subsequent purchaser/end-user.3The limited warranty extends only to Consumers who purchase the Product in the United States of America.4During the limited warranty period, Nokia will repair, or replace, at Nokia’s sole option, any defective parts, or any parts that will not properly operate for their intended use with new or refurbished replacement items if such repair or replacement is needed because of product malfunction or failure during normal usage. No charge will be made to the Consumer for any such parts. Nokia will also pay for the labor charges incurred by Nokia in repairing or replacing the defective parts. The limited warranty does not cover defects in appearance, cosmetic, decorative or structural items, including framing, and any non-operative parts. Nokia’s limit of liability under the limited warranty shall be the actual cash value of the Product at the time the Consumer returns the Product for repair, determined by the price paid by the Consumer for the Product less a reasonable amount for usage. Nokia shall not be liable for any other losses or damages. These remedies are the Consumer’s exclusive remedies for breach of warranty.5Upon request from Nokia, the Consumer must prove the date of the original purchase of the Product by a dated bill of sale or dated itemized receipt.
DRAFT[ 163 ]Reference information6The Consumer shall bear the cost of shipping the Product to Nokia in Melbourne, Florida. Nokia shall bear the cost of shipping the Product back to the Consumer after the completion of service under this limited warranty.7The Consumer shall have no coverage or benefits under this limited warranty if any of the following conditions are applicable:a) The Product has been subjected to abnormal use, abnormal conditions, improper storage, exposure to moisture or dampness, unauthorized modifications, unauthorized connections, unauthorized repair, misuse, neglect, abuse, accident, alteration, improper installation, or other acts which are not the fault of Nokia, including damage caused by shipping.b) The Product has been damaged from external causes such as collision with an object, or from fire, flooding, sand, dirt, windstorm, lightning, earthquake or damage from exposure to weather conditions, an Act of God, or battery leakage, theft, blown fuse, or improper use of any electrical source, damage caused by computer or internet viruses, bugs, worms, Trojan Horses, cancelbots or damage caused by the connection to other products not recommended for interconnection by Nokia.c) Nokia was not advised in writing by the Consumer of the alleged defect or malfunction of the Product within fourteen (14) days after the expiration of the applicable limited warranty period.d) The Product serial number plate or the enhancement data code has been removed, defaced or altered.e) The defect or damage was caused by the defective function of the cellular system or by inadequate signal reception by the external antenna, or viruses or other software problems introduced into the Product.8Nokia does not warrant uninterrupted or error-free operation of the Product. If a problem develops during the limited warranty period, the Consumer shall take the following step-by-step procedure:
DRAFT[ 164 ]a) The Consumer shall return the Product to the place of purchase for repair or replacement processing.b) If “a” is not convenient because of distance (more than 50 miles) or for other good cause, the Consumer shall ship the Product prepaid and insured to:Nokia Inc., Attn: Repair Department795 West Nasa Blvd. Melbourne, FL 32901c) The Consumer shall include a return address, daytime phone number and/or fax number, complete description of the problem, proof of purchase and service agreement (if applicable). Expenses related to removing the Product from an installation are not covered under this limited warranty.d) The Consumer will be billed for any parts or labor charges not covered by this limited warranty. The Consumer will be responsible for any expenses related to reinstallation of the Product.e) Nokia will repair the Product under the limited warranty within 30 days after receipt of the Product. If Nokia cannot perform repairs covered under this limited warranty within 30 days, or after a reasonable number of attempts to repair the same defect, Nokia at its option, will provide a replacement Product or refund the purchase price of the Product less a reasonable amount for usage. In some states the Consumer may have the right to a loaner if the repair of the Product takes more than ten (10) days. Please contact the Customer Service Center at Nokia at the telephone number listed at the end of this warranty if you need a loaner and the repair of the Product has taken or is estimated to take more than ten (10) days.f) If the Product is returned during the limited warranty period, but the problem with the Product is not covered under the terms and conditions of this limited warranty, the Consumer will be notified and given an estimate of the charges the Consumer must pay to
DRAFT[ 165 ]Reference informationhave the Product repaired, with all shipping charges billed to the Consumer. If the estimate is refused, the Product will be returned freight collect. If the Product is returned after the expiration of the limited warranty period, Nokia’s normal service policies shall apply and the Consumer will be responsible for all shipping charges.9You (the Consumer) understand that the product may consist of refurbished equipment that contains used components, some of which have been reprocessed. The used components comply with Product performance and reliability specifications.10 ANY IMPLIED WARRANTY OF MERCHANTABILITY, OR FITNESS FOR A PARTICULAR PURPOSE OR USE, SHALL BE LIMITED TO THE DURATION OF THE FOREGOING LIMITED WRITTEN WARRANTY. OTHERWISE, THE FOREGOING LIMITED WARRANTY IS THE CONSUMER’S SOLE AND EXCLUSIVE REMEDY AND IS IN LIEU OF ALL OTHER WARRANTIES, EXPRESS OR IMPLIED. NOKIA SHALL NOT BE LIABLE FOR SPECIAL, INCIDENTAL, PUNITIVE OR CONSEQUENTIAL DAMAGES, INCLUDING BUT NOT LIMITED TO LOSS OF ANTICIPATED BENEFITS OR PROFITS, LOSS OF SAVINGS OR REVENUE, LOSS OF DATA, PUNITIVE DAMAGES, LOSS OF USE OF THE PRODUCT OR ANY ASSOCIATED EQUIPMENT, COST OF CAPITAL, COST OF ANY SUBSTITUTE EQUIPMENT OR FACILITIES, DOWNTIME, THE CLAIMS OF ANY THIRD PARTIES, INCLUDING CUSTOMERS, AND INJURY TO PROPERTY, RESULTING FROM THE PURCHASE OR USE OF THE PRODUCT OR ARISING FROM BREACH OF THE WARRANTY, BREACH OF CONTRACT, NEGLIGENCE, STRICT TORT, OR ANY OTHER LEGAL OR EQUITABLE THEORY, EVEN IF NOKIA KNEW OF THE LIKELIHOOD OF SUCH DAMAGES. NOKIA SHALL NOT BE LIABLE FOR DELAY IN RENDERING SERVICE UNDER THE LIMITED WARRANTY, OR LOSS OF USE DURING THE PERIOD THAT THE PRODUCT IS BEING REPAIRED.11 Some states do not allow limitation of how long an implied warranty lasts, so the one year warranty limitation may not apply to you (the Consumer). Some states do not allow the exclusion or limitation of incidental and consequential damages, so certain of the above limitations or exclusions may not apply to you (the Consumer). This
DRAFT[ 166 ]limited warranty gives the Consumer specific legal rights and the Consumer may also have other rights which vary from state to state.12 Nokia neither assumes nor authorizes any authorized service center or any other person or entity to assume for it any other obligation or liability beyond that which is expressly provided for in this limited warranty including the provider or seller of any extended warranty or service agreement.13 This is the entire warranty between Nokia and the Consumer, and supersedes all prior and contemporaneous agreements or understandings, oral or written, relating to the Product, and no representation, promise or condition not contained herein shall modify these terms.14 This limited warranty allocates the risk of failure of the Product between the Consumer and Nokia. The allocation is recognized by the Consumer and is reflected in the purchase price.15 Any action or lawsuit for breach of warranty must be commenced within eighteen (18) months following purchase of the Product.16 Questions concerning this limited warranty may be directed to: Nokia Inc. Attn: Customer Service7725 Woodland Center Blvd., Ste. 150Tampa, FL 33614Telephone: 1-888-NOKIA-2U (1-888-665-4228)Facsimile: (813) 287-6612TTY/TDD Users Only: 1-800-24-NOKIA (1-800-246-6542)17 The limited warranty period for Nokia supplied attachments and enhancements is specifically defined within their own warranty cards and packaging.
DRAFT[ 167 ]Appendix AAppendix AMessage from the CTIA (Cellular Telecommunications & Internet Association) to all users of mobile phones.© 2001 Cellular Telecommunications & Internet Association. All Rights Reserved.1250 Connecticut Avenue, NW Suite 800, Washington, DC 20036. Phone: (202) 785-0081
DRAFT[ 168 ]Safety is the most important call you will ever make.A Guide to Safe an d R esp on sible Wire less Phone UseTens of millions of people in the U.S. today take advantage of the unique combination of convenience, safety and value delivered by the wireless telephone. Quite simply, the wireless phone gives people the powerful ability to communicate by voice--almost anywhere, anytime--with the boss, with a client, with the kids, with emergency personnel or even with the police. Each year, Americans make billions of calls from their wireless phones, and the numbers are rapidly growing.But an important responsibility accompanies those benefits, one that every wireless phone user must uphold. When driving a car, driving is your first responsibility. A wireless phone can be an invaluable tool, but good judgment must be exercised at all times while driving a motor vehicle--whether on the phone or not.The basic lessons are ones we all learned as teenagers. Driving requires alertness, caution and courtesy. It requires a heavy dose of basic common sense---keep your head up, keep your eyes on the road, check your mirrors frequently and watch out for other drivers. It requires obeying all traffic signs and signals and staying within the speed limit. It means using seatbelts and requiring other passengers to do the same.But with wireless phone use, driving safely means a little more. This brochure is a call to wireless phone users everywhere to make safety their first priority when behind the wheel of a car. Wireless telecommunications is keeping us in touch, simplifying our lives, protecting us in emergencies and providing opportunities to help others in need. When it comes to the use of wireless phones, safety is your most important call. Wire less Phone "S afety Tips"Below are safety tips to follow while driving and using a wireless phone which should be easy to remember. 1 Get to know your wireless phone and its features such as speed dial and redial. Carefully read your instruction manual and learn to take advantage of valuable features most phones offer, including automatic redial and memory. Also, work to memorize the phone keypad so you can use the speed dial function without taking your attention off the road.2 When available, use a hands free device. A number of hands free wireless phone accessories are readily available today. Whether you choose an installed mounted device for your wireless phone or a speaker phone accessory, take advantage of these devices if available to you.3 Position your wireless phone within easy reach. Make sure you place your wireless phone within easy reach and where you can grab it without removing your eyes from the road. If you get an incoming call at an inconvenient time, if possible, let your voice mail answer it for you.4 Suspend conversations during hazardous driving conditions or situations. Let the person you are speaking with know you are driving; if necessary, suspend the
DRAFT[ 169 ]Appendix Acall in heavy traffic or hazardous weather conditions. Rain, sleet, snow and ice can be hazardous, but so is heavy traffic. As a driver, your first responsibility is to pay attention to the road.5 Do not take notes or look up phone numbers while driving. If you are reading an address book or business card, or writing a "to do" list while driving a car, you are not watching where you are going. It’s common sense. Don’t get caught in a dangerous situation because you are reading or writing and not paying attention to the road or nearby vehicles.6 Dial sensibly and assess the traffic; if possible, place calls when you are not moving or before pulling into traffic. Try to plan your calls before you begin your trip or attempt to coincide your calls with times you may be stopped at a stop sign, red light or otherwise stationary. But if you need to dial while driving, follow this simple tip--dial only a few numbers, check the road and your mirrors, then continue.7 Do not engage in stressful or emotional conversations that may be distracting. Stressful or emotional conversations and driving do not mix--they are distracting and even dangerous when you are behind the wheel of a car. Make people you are talking with aware you are driving and if necessary, suspend conversations which have the potential to divert your attention from the road.8 Use your wireless phone to call for help. Your wireless phone is one of the greatest tools you can own to protect yourself and your family in dangerous situations--with your phone at your side, help is only three numbers away. Dial 9-1-1 or other local emergency number in the case of fire, traffic accident, road hazard or medical emergency. Remember, it is a free call on your wireless phone!9 Use your wireless phone to help others in emergencies. Your wireless phone provides you a perfect opportunity to be a "Good Samaritan" in your community. If you see an auto accident, crime in progress or other serious emergency where lives are in danger, call 9-1-1 or other local emergency number, as you would want others to do for you.10 Call roadside assistance or a special wireless non-emergency assistance number when necessary. Certain situations you encounter while driving may require attention, but are not urgent enough to merit a call for emergency services. But you still can use your wireless phone to lend a hand. If you see a broken-down vehicle posing no serious hazard, a broken traffic signal, a minor traffic accident where no one appears injured or a vehicle you know to be stolen, call roadside assistance or other special non-emergency wireless number.Careless, distracted individuals and people driving irresponsibly represent a hazard to everyone on the road. Since 1984, the Cellular Telecommunications Industry Association and the wireless industry have conducted educational outreach to inform wireless phone users of their responsibilities as safe drivers and good citizens. As we approach a new century, more and more of us will take advantage of the benefits of wireless telephones. And, as we take to the roads, we all have a responsibility to drive safely.The wireless industry reminds you to use your phone safely when driving.
DRAFT[ 170 ]For more information, please call 1-888-901-SAFE.For updates: http://www.wow-com.com/consumer/issues/driving/articles.cfm?ID=85© 2001 Cellular Telecommunications & Internet Association. All Rights Reserved.1250 Connecticut Avenue, NW Suite 800, Washington, DC 20036. Phone: (202) 785-0081
DRAFT[ 171 ]Appendix BAppendix B Message from the FDA (U.S. Food and Drug Administration) to all users of mobile phones.July 18, 2001...... For updates: http://www.fda.gov/cdrh/phones
DRAFT[ 172 ]Consum er Update on Wire less PhonesU.S. Food and Drug Adm inistra tion1. Do wire less phones pose a health hazard?The available scientific evidence does not show that any health problems are associated with using wireless phones. There is no proof, however, that wireless phones are absolutely safe. Wireless phones emit low levels of radiofrequency energy (RF) in the microwave range while being used. They also emit very low levels of RF when in the stand-by mode. Whereas high levels of RF can produce health effects (by heating tissue), exposure to low level RF that does not produce heating effects causes no known adverse health effects. Many studies of low level RF exposures have not found any biological effects. Some studies have suggested that some biological effects may occur, but such findings have not been confirmed by additional research. In some cases, other researchers have had difficulty in reproducing those studies, or in determining the reasons for inconsistent results.2. What is FD A 's ro le concerning the safety of wire less phones?Under the law, FDA does not review the safety of radiation-emitting consumer products such as wireless phones before they can be sold, as it does with new drugs or medical devices. However, the agency has authority to take action if wireless phones are shown to emit radiofrequency energy (RF) at a level that is hazardous to the user. In such a case, FDA could require the manufacturers of wireless phones to notify users of the health hazard and to repair, replace or recall the phones so that the hazard no longer exists.Although the existing scientific data do not justify FDA regulatory actions, FDA has urged the wireless phone industry to take a number of steps, including the following:• Support needed research into possible biological effects of RF of the type emitted by wireless phones;• Design wireless phones in a way that minimizes any RF exposure to the user that is not necessary for device function; and• Cooperate in providing users of wireless phones with the best possible information on possible effects of wireless phone use on human health.FDA belongs to an interagency working group of the federal agencies that have responsibility for different aspects of RF safety to ensure coordinated efforts at the federal level. The following agencies belong to this working group:• National Institute for Occupational Safety and Health• Environmental Protection Agency• Federal Communications Commission• Occupational Safety and Health Administration• National Telecommunications and Information AdministrationThe National Institutes of Health participates in some interagency working group activities, as well.FDA shares regulatory responsibilities for wireless phones with the Federal Communications Commission (FCC). All phones that are sold in the United States must comply with FCC safety guidelines that limit RF exposure. FCC relies on FDA and other health agencies for safety questions about wireless phones. FCC also regulates the base stations that the wireless phone networks rely upon. While these base stations operate at higher power than do the wireless phones themselves, the
DRAFT[ 173 ]Appendix BRF exposures that people get from these base stations are typically thousands of times lower than those they can get from wireless phones. Base stations are thus not the subject of the safety questions discussed in this document.3. What kinds of phones are th e subject of this update?The term wireless phone refers here to hand-held wireless phones with built-in antennas, often called cell mobile or PCS phones. These types of wireless phones can expose the user to measurable radiofrequency energy (RF) because of the short distance between the phone and the user’s head. These RF exposures are limited by Federal Communications Commission safety guidelines that were developed with the advice of FDA and other federal health and safety agencies. When the phone is located at greater distances from the user, the exposure to RF is drastically lower because a person's RF exposure decreases rapidly with increasing distance from the source. The so-called cordless phones; which have a base unit connected to the telephone wiring in a house, typically operate at far lower power levels, and thus produce RF exposures far below the FCC safety limits.4. What are the re s u lts of the research done alre a d y ?The research done thus far has produced conflicting results, and many studies have suffered from flaws in their research methods. Animal experiments investigating the effects of radiofrequency energy (RF) exposures characteristic of wireless phones have yielded conflicting results that often cannot be repeated in other laboratories. A few animal studies, however, have suggested that low levels of RF could accelerate the development of cancer in laboratory animals. However, many of the studies that showed increased tumor development used animals that had been genetically engineered or treated with cancer-causing chemicals so as to be pre-disposed to develop cancer in the absence of RF exposure. Other studies exposed the animals to RF for up to 22 hours per day. These conditions are not similar to the conditions under which people use wireless phones, so we don’t know with certainty what the results of such studies mean for human health.Three large epidemiology studies have been published since December 2000. Between them, the studies investigated any possible association between the use of wireless phones and primary brain cancer, glioma, meningioma, or acoustic neuroma, tumors of the brain or salivary gland, leukemia, or other cancers. None of the studies demonstrated the existence of any harmful health effects from wireless phone RF exposures. However, none of the studies can answer questions about long-term exposures, since the average period of phone use in these studies was around three years.5.What research is needed to decide whether RF exposure fro m wire less phones poses a health risk?A combination of laboratory studies and epidemiological studies of people actually using wireless phones would provide some of the data that are needed. Lifetime animal exposure studies could be completed in a few years. However, very large numbers of animals would be needed to provide reliable proof of a cancer promoting effect if one exists. Epidemiological studies can provide data that is directly applicable to human populations, but 10 or more years follow-up may be needed to provide answers about some health effects, such as cancer. This is because the interval between the time of exposure to a cancer-causing agent and the time tumors develop - if they do - may be many, many years. The interpretation of epidemiological studies is hampered by difficulties in measuring actual RF exposure during day-to-day use of wireless phones. Many factors affect this measurement, such as the angle at which the phone is held, or which model of phone is used.
DRAFT[ 174 ]6.W hat is FDA doing to find out more about the possible health effects of wire less phone RF?FDA is working with the U.S. National Toxicology Program and with groups of investigators around the world to ensure that high priority animal studies are conducted to address important questions about the effects of exposure to radiofrequency energy (RF).FDA has been a leading participant in the World Health Organization International Electromagnetic Fields (EMF) Project since its inception in 1996. An influential result of this work has been the development of a detailed agenda of research needs that has driven the establishment of new research programs around the world. The Project has also helped develop a series of public information documents on EMF issues.FDA and the Cellular Telecommunications C Internet Association (CTIA) have a formal Cooperative Research and Development Agreement (CRADA) to do research on wireless phone safety. FDA provides the scientific oversight, obtaining input from experts in government, industry, and academic organizations. CTIA-funded research is conducted through contracts to independent investigators. The initial research will include both laboratory studies and studies of wireless phone users. The CRADA will also include a broad assessment of additional research needs in the context of the latest research developments around the world.7. How can I find out how much ra d iofrequency energy exposure I can get by using my wire less phone?All phones sold in the United States must comply with Federal Communications Commission (FCC) guidelines that limit radiofrequency energy (RF) exposures. FCC established these guidelines in consultation with FDA and the other federal health and safety agencies. The FCC limit for RF exposure from wireless telephones is set at a Specific Absorption Rate (SAR) of 1.6 watts per kilogram (1.6 W/kg). The FCC limit is consistent with the safety standards developed by the Institute of Electrical and Electronic Engineering (IEEE) and the National Council on Radiation Protection and Measurement. The exposure limit takes into consideration the body’s ability to remove heat from the tissues that absorb energy from the wireless phone and is set well below levels known to have effects.Manufacturers of wireless phones must report the RF exposure level for each model of phone to the FCC. The FCC website (http://www.fcc.gov/oet/rfsafety) gives directions for locating the FCC identification number on your phone so you can find your phone’s RF exposure level in the online listing.8. What has FDA done to measure the ra d iofre q u e n c y energy com ing fro m wire less phones?The Institute of Electrical and Electronic Engineers (IEEE) is developing a technical standard for measuring the radiofrequency energy (RF) exposure from wireless phones and other wireless handsets with the participation and leadership of FDA scientists and engineers. The standard, Recommended Practice for Determining the Spatial-Peak Specific Absorption Rate (SAR) in the Human Body Due to Wireless Communications Devices: Experimental Techniques, sets forth the first consistent test methodology for measuring the rate at which RF is deposited in the heads of wireless phone users. The test method uses a tissue-simulating model of the human head. Standardized SAR test methodology is expected to greatly improve the consistency of measurements made at different laboratories on the same phone. SAR is the measurement of the amount of energy absorbed in tissue, either by the whole
DRAFT[ 175 ]Appendix Bbody or a small part of the body. It is measured in watts/kg (or milliwatts/g) of matter. This measurement is used to determine whether a wireless phone complies with safety guidelines.9. What steps can I take to re d u c e my exposure to ra d iofrequency energy fro m my wire less phone?If there is a risk from these products--and at this point we do not know that there is--it is probably very small. But if you are concerned about avoiding even potential risks, you can take a few simple steps to minimize your exposure to radiofrequency energy (RF). Since time is a key factor in how much exposure a person receives, reducing the amount of time spent using a wireless phone will reduce RF exposure.If you must conduct extended conversations by wireless phone every day, you could place more distance between your body and the source of the RF, since the exposure level drops off dramatically with distance. For example, you could use a headset and carry the wireless phone away from your body or use a wireless phone connected to a remote antenna.Again, the scientific data do not demonstrate that wireless phones are harmful. But if you are concerned about the RF exposure from these products, you can use measures like those described above to reduce your RF exposure from wireless phone use.10. What about children using wire less phones?The scientific evidence does not show a danger to users of wireless phones, including children and teenagers. If you want to take steps to lower exposure to radiofrequency energy (RF), the measures described above would apply to children and teenagers using wireless phones. Reducing the time of wireless phone use and increasing the distance between the user and the RF source will reduce RF exposure.Some groups sponsored by other national governments have advised that children be discouraged from using wireless phones at all. For example, the government in the United Kingdom distributed leaflets containing such a recommendation in December 2000. They noted that no evidence exists that using a wireless phone causes brain tumors or other ill effects. Their recommendation to limit wireless phone use by children was strictly precautionary; it was not based on scientific evidence that any health hazard exists.11. What about wire less phone interference with medical equipm ent?Radiofrequency energy (RF) from wireless phones can interact with some electronic devices. For this reason, FDA helped develop a detailed test method to measure electromagnetic interference (EMI) of implanted cardiac pacemakers and defibrillators from wireless telephones. This test method is now part of a standard sponsored by the Association for the Advancement of Medical instrumentation (AAMI). The final draft, a joint effort by FDA, medical device manufacturers, and many other groups, was completed in late 2000. This standard will allow manufacturers to ensure that cardiac pacemakers and defibrillators are safe from wireless phone EMI. FDA has tested hearing aids for interference from handheld wireless phones and helped develop a voluntary standard sponsored by the Institute of Electrical and Electronic Engineers (IEEE). This standard specifies test methods and performance requirements for hearing aids and wireless phones so that no interference occurs when a person uses a compatible phone and a accompanied hearing aid at the same time. This standard was approved by the IEEE in 2000.
DRAFT[ 176 ]FDA continues to monitor the use of wireless phones for possible interactions with other medical devices. Should harmful interference be found to occur, FDA will conduct testing to assess the interference and work to resolve the problem.12. W here can I find additional inform ation?For additional information, please refer to the following resources:• FDA web page on wireless phoneshttp://www.fda.gov/cdrh/phones/index.html• Federal Communications Commission (FCC) RF Safety Program http://www.fcc.gov/oet/rfsafety• International Commission on Non-Ionizing Radiation Protectionhttp://www.icnirp.de• World Health Organization (WHO) International EMF Projecthttp://www.who.int/emf• National Radiological Protection Board (UK)http://www.nrpb.org.uk/July 18, 2001For updates: http://www.fda.gov/cdrh/phones
DRAFT[ 177 ]1-touch dialing 48assign a key 49change numbers 49delete numbers 50make a call 49Aactivateautomatic redial 91call forwarding 90adding folders 74alarmsetting 103snooze 103turning off 104with phone off 104with phone on 103alarm clock 103antennause the antenna 8applications 118downloading 119launching 118options 118view memory status 120audible alerts 126setting up 126sounds 126authority certificates 141about 141viewing 141automatic Keygaurddeactivate 94automatic Keyguard 94activate 94automatic redial 91Bbatteryprolonging battery life 9use the battery 8battery (BLD-3) 151battery infocharging times 150talk and standby times 150battery operation times 150birthday note 110bookmarkset while browsing 140bookmarks 140browseruse bookmarks 140browser options 137Business cardsreceive 47send 47Ccalculator 121calendar4-way scrolling 110birthday note 110call note 110date notes 110discard viewed notes 114go to date 110meeting note 110memo note 110monthly view 110note options 111note types 110opening 109reminder 110
DRAFT[ 178 ]save received notes 113saving notes 110uses 109view notes 111view received notes 113calendar notessending and receiving 112call duration 83viewing 83call forwardingactivate 90cancelling 91definition 89call logabout 80call duration 92delete call lists 82options 80view call duration 83view dialed numbers 82view missed calls 81view received calls 81call note 110call waiting 92activate 92caller groups 53options 53setup 54callsforwarding 90ignoring 14redial last 14camera headset (HS-1C) 153cancel call forwarding 91cell info display 94certification information 148change1-touch dialing numbers 49keypad tones 85message alert tone 85PIN2 code 40profile names 85ringing options 85ringing tone 85ringing volume 85security codes 39security levels 36time format 89chargerconnecting 8charging times 150ACP-12 150ACP-7 150ACP-8 150clockalarm 103set 88set the date 89show/hide 88time format 89closed user groups 38codesaccess 38dialing 71PIN2 40PUK 41complete car kit (CARK-143) 154connect to other devices 127connectivity 127IR 127connectivity desk stand (DCV-14) 154Contacts 42copy 47
DRAFT[ 179 ]delete 46edit 46save 43search 46view 42currencyconverting 122exchange rate 122to foreign 122to home 122currency conversion 122customer careCanada 16USA 16customizedisplay language 93Ddata cable (DKU-5) 153deactivate automatic redial 91definition of terms 158delete1-touch dialing numbers 50messages 75delete call lists 82dialed calls, viewing 82dialing codeshow to use 71setup voicemail with 72dictionaryadd new words 34in predictive text 34disconnect from wireless Internet 140display brightnessscreen brightness 99display language 93display settings 97color schemes 98screen brightness 29screen saver 98wallpaper 97downloadpictures 59E(E)GPRS 129dial-up connections 129make a call while online 131make an emergency call 131phone symbols 129receive a call while online 131set up 130e-mailreplying 63writing and sending 62emergency callmake while using (E)GPRS 131emergency calls 147with keypad locked 35, 94enhancement settings 99handsfree 99headset 99loopset 100music stand 102TTY 100enhancements 151battery (BLD-3) 151camera headset (HS-1C) 153complete car kit (CARK-143) 154connectivity stand (DCV-14) 154data cable (DKU-5) 153headset kit (HDB-4) 152loopset (LPS-4) 153
DRAFT[ 180 ]mobile charger (LCH-12) 152music stand (DT-1) 154safety 151travel charger (ACP-12) 152TTY/TDD adapter (HDA-10) 153extras 121FFAQs 155FCC information 148fixed dialingedit number list 37emergency numbers 36notes about 38setup and activate 36foldersadding 74list of 74organize messages with 73removing 75four-way scrollingin calendar 110Ggames 116launching 116options 117playing 117glossary 158Hhandsfree 99headset 99headset kit (HDB-4) 152help text 96IIMEIlocation on the phone 16, 158Infrared connections 127sending and receiving data 127Internetconnect with your phone 137Llanguagesavailable 93setting 93loopset 100description 153loopset (LPS-4) 153Mmeeting note 110memo note 110menu functions 55messages 55messageschange message settings 76change MMS settings 78deleting 75e-mail 62message center number 56message icons 55moving 75picture messages 59save to folders 73text messages 57view saved 74voice messages 69missed calls 81MMS
DRAFT[ 181 ]defining 64editing 66reading and replying 68writing and sending 67mobile charger (LCH-12) 152moving messages 75multimedia messages 63music stand 102music stand (DT-1) 154NNokia one-year limited warranty 162Nokia PC Suitefeatures 135Nokia PC Suite 129, 135OOrganizer 109Pphone securitysecurity code 38security levels 35picture messagescomposing and sending 60downloading pictures for 59modifying 61receiving 60sending 59PIN 2 code 40PIN codechanging 40PIN code request 39predictive textabout 57activate and deactivate 32add new words 34primary numbercopying 47profiles 84customizing 84list of 84selecting 84timed 85PUK codes 41Rreceived calls 81receivingcalendar notes 112reference information 142battery statements 142emergency calls 147safety information 144care and maintenance 143reminder note 110removing folders 75restore factory settings 102right selection key settings 87SSARdefinition 148limits 149savecalendar notes 110received calendar notes 113screen saver 98securitysecurity code 38security levels 35security settings 102sending
DRAFT[ 182 ]calendar notes 112services 136set clock 88set the display language 93settings 87right selection key settings 87time and date settings 88tone settings 99setupvoicemail 70show/hide clock 88SIMSIIM-related services 96SIM cardif rejected 41info numbers 53non-owner 35own numbers 53PIN code 39security levels 35service numbers 53start-up tone 97synchronizefrom your PC 134from your phone 133saving settings 132synchronize data 131system selection 95Ttalk and standby times 150technical information 160text messagesforwarding 59reading 58replying to 58send calendar notes as 115writing and sending 57time and date settings 88time format 89timed profiles 85to-do list 114adding to a note 114making 114options 114travel charger (ACP-12) 152troubleshooting 161TTY/TDD 100make a call 101receive a call 102set up profile 100TTY/TDD adapter (HDA-10) 153Vvibrating alertturn on or off 85viewcalendar notes 111call duration 83clock on the start screen 88dialed numbers 82fixed dialing numbers 37missed calls 81monthly view, calendar 110picture messages 60received calendar notes 113received calls 81received messages 58saved messages 74voice commandsactivating 125adding 125functions 124working with 125
DRAFT[ 183 ]Voice dialing 50assigning a voice tag 50dialing a number 51voice dialingchange a voice tag 52delete a voice tag 52play back a voice tag 52voice messages 29voice recorder 123deleting a recording 124editing a recording 124recording speech or sound 123recording while in a call 123setting voice memo alarm 124view and play recordings 123voicemailautomate 70call and setup 29, 70listen to voice messages 29, 70save voice mailbox number 69using dialing codes 72Wwallpaper 97warning tonesturn on or off 85warranty information 162welcome note 95wireless Internetbrowsing 137navigating 138security issues 140signing off 140signing on 137wireless internet accessnotes 136wireless Internet siteexamples 139how to read 139XxHTML 136xHTML broswer 137use phone keys 138xHTML pageactive link 139enter information 139examples 139using bookmarks 140

Navigation menu