Microsoft NPM-6X PCS Band GSM Cellular Transceiver User Manual Manual

Microsoft Mobile Oy PCS Band GSM Cellular Transceiver Manual

UserManual.wiki >

Microsoft >

NPM 6X User Manual

Manual

[ 1 DRAFT ]Safety first1Safety firstRead these simple guidelines. Breaking the rules may be dangerous or illegal. Further detailed information is given in this manual.Do not switch the phone on when wireless phone use is prohibited or when it may cause interference or danger.ROAD SAFETY COMES FIRSTDon't use a hand-held phone while driving.INTERFERENCEAll wireless phones may get interference, which could affect performance.SWITCH OFF IN HOSPITALSFollow any regulations or rules. Switch the phone off near medical equipment.SWITCH OFF IN AIRCRAFTWireless devices can cause interference in aircraft.SWITCH OFF WHEN REFUELINGDon't use the phone at a refuelling point. Don't use near fuel or chemicals.SWITCH OFF NEAR BLASTINGDon't use the phone where blasting is in progress. Observe restrictions, and follow any regulations or rules.USE SENSIBLYUse only in the normal position. Don't touch the antenna unnecessarily.QUALIFIED SERVICEOnly qualified personnel may install or repair phone equipment.

[ 2 DRAFT ]OBSERVE INFRARED PRECAUTIONSDo not point the IR beam at anyone’s eyes or allow it to interfere with other IR devices.ACCESSORIES AND BATTERIESUse only approved accessories and batteries. Do not connect incompatible products.CONNECTING TO OTHER DEVICESWhen connecting to any other device, read its user's guide for detailed safety instructions. Do not connect incompatible products.BACKUP COPIESRemember to make backup copies of all important data.WATER-RESISTANCEYour phone is not water-resistant. Keep it dry.CALLINGEnsure the phone is switched on and in service. Enter the phone number, including the area code, then press the Talk key. To end a call, press the End key. To answer a call, press the Talk key.EMERGENCY CALLSEnsure the phone is switched on and in service. Press the End key as s many times as needed (e.g. to exit a call, to exit a menu, etc.) to clear the display. Enter the emergency number, then press the Talk key. Give your location. Do not end the call until told to do so. • ABOUT ACCESSORIESCheck the model number of any charger before use with this device. This device is intended for use when supplied with power from ACP-12 and LCH-12.

[ 3 DRAFT ]Safety firstWarning: Use only batteries, chargers and accessories approved by the phone manufacturer for use with this particular phone model. The use of any other types may invalidate any approval or warranty applying to the phone, and may be dangerous.For availability of approved accessories, please check with your dealer.When you disconnect the power cord of any accessory, grasp and pull the plug, not the cord.

[ 4 DRAFT ]2An overview of functions • MULTIMEDIA MESSAGING SERVICE (MMS)Your phone is able to send and receive multimedia messages made up of text and pictures. You may also be able to receive polyphonic ringing tones. You can also save pictures and ringing tones to personalize your phone. See “Multimedia Messages” on page70 for more information. This feature uses shared memory. Please see “Shared memory” on page15 for more information. • POLYPHONIC SOUND (MIDI)Polyphonic sounds are used in ringing tones and message alert tones. They consist of several sound components played at the same time, like an actual melody through a speaker. Your phone has sound components from over 40 instruments that can be used for polyphonic sounds and the phone can play four instruments simultaneously. The phone supports Scalable Polyphonic MIDI (SP-MIDI) format.You can receive polyphonic ringing tones via multimedia service, (see “Read and reply to a multimedia message” on page74), or download them via the gallery menu, see “Gallery (Menu 7)” on page113 for more information. • GENERAL PACKET RADIO SERVICE (GPRS)GPRS technology allows mobile phones to send and receive data over a mobile network. Applications such as WAP, MMS, text messaging, and JavaTM use GPRS. Your phone supports up to three simultaneous GPRS connections.For more information on GPRS, see “GPRS” on page137. Also, consult the PC Connectivity Guide. The PC Connectivity Guide, Nokia PC Suite, and all related software can be downloaded from the U.S. Mobile Phone products section of www.nokia.com.

[ 5 DRAFT ]An overview of functionsBefore you can use GPRS technology•Contact your network operator or service provider for availability and subscription to the GPRS service.•Save the GPRS settings for each of the applications used over GPRS.PRICING FOR GPRS AND APPLICATIONSYour wireless provider may charge for GPRS services. For more information on pricing, contact your wireless provider. • SPEAKERPHONEYou can use your phone as a speakerphone during a call.•To activate the speakerphone, press Loudsp.•To deactivate the speakerphone during a call, press Handset.The speakerphone deactivates automatically when you end the call, attempt to make a new call, or when you connect a headset. • FLASHLIGHTThere is a flashlight in your phone. You can activate it while in standby mode when the keypad is not locked.•To activate the flashlight, press and hold the up scroll key. To switch off the flashlight, release the scroll key.•To have the flashlight on continuously, quickly press the up scroll key twice. To switch it off again, press the up scroll key once. • JAVATM APPLICATIONSYour phone supports JavaTM and includes some Java applications and games that have been specially designed for mobile phones. You may be able to download new applications and games to your phone from a PC with Java installer software or from some Mobile Internet services. See “Applications (Menu 10)” on page124 for more information.

[ 6 DRAFT ] This feature uses shared memory. Please see “Shared memory” on page15 for more information. • FM STEREO RADIOYour phone has an integrated FM stereo radio. You can listen to the radio through a headset or the handsfree speaker (with the headset attached). See “Radio (Menu 6)” on page110 for more information.

[ 7 DRAFT ]Welcome and quick guide3Welcome and quick guideCongratulations on your purchase of the Nokia 5100 mobile phone. Your phone provides many functions which are practical for daily use, such as a Calendar, Radio, Alarm clock, Calculator, and more. A variety of Xpress-onTM color shells are also available. Your phone can also connect to a PC, laptop, or other device using the data cable or built-in IR port. For more information on connectivity, refer to the PC Connectivity Guide. The PC Connectivity Guide, Nokia PC Suite, and all related software can be downloaded from the U.S. Mobile Phone products section of www.nokia.com.Improved durabilityThe Nokia 5100 phone has been designed for an active lifestyle. It is a phone with enduring quality and reliability. It has an improved protection against water splashes, dust, and bumps. The rubbery surface and ergonomic shape provide a firm and reliable grip and convenience.The top and bottom shells provide improved protection against water splashes and dust. Also the inner module including the bottom connector has resistance to splashes and dust when the shells and key mat are mounted. There are membranes and gaskets to give protection for inner parts.The phone has improved durability to protect against accidental bumps (e.g. if phone drops from your pocket or desk). The bottom flap gives extra protection for the connectors against knocks and dirt. • GET THE MOST OUT OF THIS GUIDEThe tips that follow can help you get the most from this guide as you learn to use your phone.

[ 8 DRAFT ]Learn text conventionsThis user guide provides text clues to help make instructions clear and easy to follow. These clues are called conventions.Follow graphic cluesThis guide uses certain icons to alert you to important information.Tip: Indicates a shortcut or alternate method of doing something.Note: Explains a feature or points out an important concept. Important:Indicates critical information on using a feature.Caution: Warns when you may lose information.Warning:Helps you avoid personal injury, damage to the phone, or property damage.Access alternate formatsThis user guide is available in alternate formats, contact Nokia at www.nokiaaccessibility.com or call 1-888-665-4228 for more information.Look for updatesFrom time to time, Nokia updates this guide to reflect changes. The latest version may be available at www.nokia.com.Also, an interactive tutorial may be available at www.nokiahowto.com.Convention What it meansbold The word or phrase appears on the phone’s displaybold and blue The text refers to an address on the world wide webitalics Indicates emphasis. Pay close attention to any information in italics

[ 10 DRAFT ] • UNDERSTAND YOUR PHONEPower keyVolume keysLeft select key Right select keyEnd keyTalk keyDisplay screenEarpieceNumber keysIR PortMicrophonePop-PortTM connectorCharger jack4-way scroll keys+-

[ 11 DRAFT ]Welcome and quick guideUse the antennaYour phone has a built-in antenna. As with any other radio transmitting device, do not touch the antenna unnecessarily when the phone is switched on. Contact with the antenna affects call quality and may cause the phone to operate at a higher power level than otherwise needed. Not touching the antenna area during a phone call optimizes the antenna performance and the talk time of your phone.Use the batteryCHARGE THE BATTERY1Plug the charger transformer in to a standard AC outlet.2Insert the charger output jack into the round connector at the bottom end of the phone.After a few seconds, the battery indicator in the display starts to scroll from bottom to top. If the battery is completely flat, it may take a few minutes before the charging indicator appears on the display or any calls can be made.Tip: You can use the phone while the charger is connected.

[ 12 DRAFT ]IMPORTANT BATTERY INFORMATIONImportant:Your phone is powered by a rechargeable battery.Use only batteries approved by Nokia and recharge your battery only with the chargers approved by Nokia. Never use any charger or battery which is damaged.The battery can be charged and discharged hundreds of times but it will eventually wear out. When the operating time (talk-time and standby time) is noticeably shorter than normal, it is time to buy a new battery.PROLONG THE BATTERYUse the following guidelines to obtain the best performance from your battery:•With your phone turned off, charge your new battery for three hours before its first use. Use the battery until it is fully discharged. Repeat this procedure twice for a total of three charging cycles.•Note that a new battery's full performance is achieved only after two or three complete charge and discharge cycles. Battery operation time may be less than the estimated times during the first charges. This condition is normal.•You can use your phone while the battery is charging. However, if the battery is completely empty, it may need to recharge a few minutes before you can make or receive calls or the battery indicator appears.•After the first charge, you can make and receive calls during the charging cycle, but the calls interrupt the charge. When the phone call ends, the charge will resume.•The bars on the screen stop scrolling and remain constant when the phone is fully charged. If you leave the phone connected to the charger, the battery receives an additional charge. If you switch the phone on when charging is complete, the message Battery full momentarily appears in the display.Note: The battery will accept a "trickle charge" for an additional two hours.

[ 13 DRAFT ]Welcome and quick guideREMOVE THE LOWER SHELL1With the back of the phone facing you, push the lower shell release indentions.2Slide the bottom of the shell to remove.REMOVE THE BATTERY3After you’ve removed the lower shell, grasp the removal flap and gently pull; the battery lifts from its compartment.Install the SIM cardWarning: Keep all miniature SIM cards out of the reach of small children.•The SIM card and its contacts can easily be damaged by scratches or bending, so be careful when handling, inserting or removing the card.•Before installing the SIM card, always make sure that the phone is switched off and that you’ve removed the shell and battery.1Slide the SIM card holder toward the bottom end of the phone until it unlocks.2Swing the SIM card holder open.121

[ 14 DRAFT ]3Insert the SIM card into the holder, (beveled corner last) and the gold contacts facing toward the top end of the phone.4Close the SIM card holder.5Slide the SIM card holder toward the top end of the phone until it locks into place.REPLACE THE BATTERYThe SIM card must be installed before installing the battery.1Position the battery so the gold contacts match up with those on the phone. The battery label should be facing away from the phone.2Insert the battery, contact end first into the battery slot.3Snap the other end of the battery into place and snap the back of the phone closed.345

[ 15 DRAFT ]Welcome and quick guideREPLACE THE LOWER SHELL1Place the phone into the lower shell. 2Slide the shell forward until it clicks into place.Shared memoryThe following features in your phone use shared memory: Phone book, text and multimedia messages, images and ringing tones in gallery, calendar and to-do notes, and JavaTM games and applications. Using any of these features leaves less memory for other features. This is especially true with heavy use of any of the features. For example, saving many images may take all of the shared memory and your phone may display that the memory is full. In this case, delete some of the information or entries reserving the shared memory.The following functions use shared memory that is dependent on the data quantity per item and shared memory available at a time in the Nokia 5100.•Phone book (up to 300 entries)•SMS messages (up to 150 text messages or 50 picture/concatenated messages)•Calendar notes (up to 250 entries)•To-do list (up to 30 entries)•Fixed ring tones (11 preset, not removable)The following features share a memory pool of 725kB:•MMS messages (max size of 30kB per MMS message)•Ring tones in Gallery (20 preset, all removable)•Images (10 preset, all removable)•JavaTM applications (3 preset, max download size 64kB per application)

[ 16 DRAFT ]The following functions use static memory:•WAP cache (up to 20 entries)•WAP bookmarks (up to 30 entries)•WAP security cache and certificates (up to 20 entries) • GET HELPFind your phone’s labelIf you need help, Nokia Customer Care is available for assistance. Before calling, however, please read “Frequently Asked Questions” on page162.We also recommend that you write down the following information and have it available if you call. The information can be found on back of the phone, beneath the battery.•The International Mobile Equipment Identifier (IMEI)•We also ask that you write down your zip code.Information label

[ 17 DRAFT ]Welcome and quick guideContact NokiaPlease have your phone or accessory with you when contacting either of the numbers below.Nokia Customer Care Center, USA Customer Interaction Center, CanadaNokia, Inc.7725 Woodland Center Boulevard Suite #150Tampa, Florida 33614Tel: 1-888-NOKIA2U (1-888-665-4228)Fax: 1-813-249-9619TTY: 1-800-24NOKIA (hearing impaired only) (1-800-246-6542)Nokia Products Ltd.601 Westney Road SouthAjax, Ontario L1S 4N7Tel: 1-888-22NOKIA (1-888-226-6542)Fax: 1-905-427-1070

[ 19 DRAFT ]Welcome and quick guide • MENU SHORTCUTSTo access a menu or item, press “Menu,” then enter the numbers associated with the desired menu or item. For example, press Menu 2-2-1 to view any Missed calls.1MESSAGES Text messages. . . . . . . . . . . . 01-1Multimedia messages. . . . . . 01-2Chat. . . . . . . . . . . . . . . . . . . . 01-3Voice messages. . . . . . . . . . . 01-4Info messages. . . . . . . . . . . . 01-5Message settings . . . . . . . . . 01-6Service commands . . . . . . . . 01-72CALL LOG Missed calls. . . . . . . . . . . . . . . 2-1Received calls. . . . . . . . . . . . . 2-2Dialed numbers. . . . . . . . . . . . 2-3Delete recent call lists. . . . . . 2-4Call timers. . . . . . . . . . . . . . . . 2-5Call costs. . . . . . . . . . . . . . . . . 2-6GPRS Data counter. . . . . . . . . 2-7GPRS Connection timer. . . . . 2-83PROFILES Normal . . . . . . . . . . . . . . . . . . 3-1Silent. . . . . . . . . . . . . . . . . . . . 3-2Meeting. . . . . . . . . . . . . . . . . . 3-3Outdoor. . . . . . . . . . . . . . . . . . 3-4Pager. . . . . . . . . . . . . . . . . . . . 3-54SETTINGS Time and date settings. . . . . . 4-1Call settings . . . . . . . . . . . . . . 4-2Phone settings . . . . . . . . . . . . 4-3Display settings . . . . . . . . . . . 4-4Tone settings. . . . . . . . . . . . . . 4-5Accessory settings . . . . . . . . . 4-6Security settings. . . . . . . . . . . 4-7Restore factory settings . . . . . 4-85ALARM CLOCK 6RADIO 7GALLERY 8ORGANIZER Calendar. . . . . . . . . . . . . . . . . . 8-1To-do list . . . . . . . . . . . . . . . . . 8-29GAMES Select game. . . . . . . . . . . . . . . 9-1Game downloads. . . . . . . . . . . 9-2Memory . . . . . . . . . . . . . . . . . . 9-3Settings . . . . . . . . . . . . . . . . . . 9-410 APPLICATIONS Select application. . . . . . . . .10-1App. downloads. . . . . . . . . . . 10-2Memory . . . . . . . . . . . . . . . . .10-311 EXTRAS Calculator . . . . . . . . . . . . . . . 11-1Countdown timer . . . . . . . . .11-2Stopwatch . . . . . . . . . . . . . . . 11-3Calorie counter . . . . . . . . . . . 11-4Thermometer. . . . . . . . . . . . .11-5Sound meter . . . . . . . . . . . . .11-612 CONNECTIVITY Infrared . . . . . . . . . . . . . . . . .12-1GPRS. . . . . . . . . . . . . . . . . . . . 12-213 SERVICES Home . . . . . . . . . . . . . . . . . . . 13-1Bookmarks. . . . . . . . . . . . . . . 13-2Service inbox. . . . . . . . . . . . .13-3Settings . . . . . . . . . . . . . . . . .13-4 Go to address. . . . . . . . . . . . .13-5Clear the cache. . . . . . . . . . . 13-6

[ 21 DRAFT ]Welcome and quick guide • SWITCH YOUR PHONE ON OR OFFWarning:Do not switch the phone on when wireless phone use is prohibited or when it may cause interference or danger.1To turn your phone on or off, press and hold the power key on top of the phone for at least 3 seconds.If the phone displays Insert SIM card even though the SIM card is properly inserted, or SIM card not supported, contact your wireless provider.2Enter the PIN code if necessary and press OK.3Enter the security code if necessary and press OK.Note: If the language that appears in your display is not correct, see “Set the display language” on page100 for information on changing your phone’s display language.

[ 22 DRAFT ] • CHECK THE START SCREENThe Start screen is “home base” and indicates your phone is in idle mode.

[ 25 DRAFT ]Welcome and quick guide • USE THE SELECTION AND SCROLL KEYSBelow each corner of the display are the selection keys. Press the left selection key when Menu appears above it to show the first of numerous menus. Page through the rest of the menus using the up and down scroll keys. Press the right selection key when Names appears above it to enter the Phone book.Tip: Press an up or down scroll key from the Start screen to view any entries in your Phone book.Use four-way scrollingIn features, such as the calendar monthly view, text messages, and special characters, you can move the cursor up and down as well as left and right. To move the cursor: • BROWSE PHONE MENUSYour phone's features are grouped according to function and are accessed through your phone's main menus. Each main menu contains submenus and lists from which you can select or view items, and customize your phone's features. You can access these menus and submenus by using the scroll method or by using a shortcut.Note: Some features may not be available, depending on your network. For more information, contact your wireless provider.Left, press the left scroll keyUp, press the up scroll keyDown, press the down scroll keyRight, press the right scroll keyRightselectLeftselect

[ 27 DRAFT ]Welcome and quick guideACTIVATE OR DEACTIVATE HELP TEXT1At the Start screen, press Menu 4-3-7 (Settings > Phone settings > Help text activation).2After a brief pause, On and Off appear in the display.3Scroll to On or Off and press Select. A confirmation message appears in the display indicating your selection.

[ 28 DRAFT ]Menu shortcuts1MESSAGESTo access a menu or item, press “Menu,” then enter the numbers associated with the desired menu or item. For example, press Menu 2-2-1 (Call log - Missed calls) to view any Missed calls.TEXT MESSAGES . . . . . . . 01-1Create message. . . . . . . 01-1-1Create e-mail . . . . . . . . 01-1-2Inbox . . . . . . . . . . . . . . . 01-1-3Sent items . . . . . . . . . . . 01-1-4Archive. . . . . . . . . . . . . . 01-1-5Templates . . . . . . . . . . . 01-1-6My folders . . . . . . . . . . . 01-1-7Delete messages . . . . . . 01-1-8MULTIMEDIA MSGS . . . . . . 01-2Create message. . . . . . . 01-2-1Inbox . . . . . . . . . . . . . . . 01-2-2Outbox. . . . . . . . . . . . . . 01-2-3Sent items . . . . . . . . . . . 01-2-4Saved items . . . . . . . . . . 01-2-5Delete messages . . . . . . 01-2-6CHAT. . . . . . . . . . . . . . . . . .01-3VOICE MESSAGES. . . . . . . . 01-4Listen to voice messages . . . . . . . 01-4-1Voice mailbox number . 01-4-2INFO MESSAGES . . . . . . . . . 01-5Info service . . . . . . . . . . 01-5-1Topics. . . . . . . . . . . . . . . 01-5-2Language. . . . . . . . . . . . 01-5-3Info topics saved on SIM card . . . . 01-5-4Read (if received only). .01-5-5MESSAGE SETTINGS . . . . . 01-6Text messages . . . . . . . .01-6-1Multimedia msgs. . . . . .01-6-2Other settings . . . . . . . .01-6-3SERVICE COMMANDS . . . . 01-72CALL LOGMISSED CALLS . . . . . . . . . . . . . . . . . 2-1RECEIVED CALLS . . . . . . . . . 2-2DIALED NUMBERS . . . . . . . . 2-3DELETE RECENTCALL LISTS. . . . . . . . . . . . . . 2-4All. . . . . . . . . . . . . . . . . . .2-4-1Missed . . . . . . . . . . . . . . .2-4-2Received . . . . . . . . . . . . . .2-4-3Dialed . . . . . . . . . . . . . . . .2-4-4CALL TIMERS . . . . . . . . . . . . 2-5Duration of last call. . . . .2-5-1Duration of dialed calls. .2-5-2Duration of received calls . . . . . . . . . .2-5-3Duration of all calls. . . . .2-5-4Clear timers . . . . . . . . . . .2-5-5CALL COSTS. . . . . . . . . . . . . 2-6Last call units. . . . . . . . . .2-6-1Units of all calls. . . . . . . .2-6-2Call cost settings. . . . . . .2-6-3GPRS DATA COUNTER . . . . . 2-7Data sent in last session.2-7-1Data received in last session. . . . . . . . . .2-7-2All sent data. . . . . . . . . . .2-7-3All received data . . . . . . .2-7-4Clear counters . . . . . . . . .2-7-5GPRS CONNECTION TIMER . . 2-8Duration of last session .2-8-1Duration of all sessions. .2-8-2Clear timers . . . . . . . . . . .2-8-3

[ 31 DRAFT ]Basic operations4Basic operations • SET THE CLOCKBefore many functions such as call timers and other features will operate properly, you need to set the clock.1At the Start screen, press Menu 4-1-1 (Settings - Time and date settings - Clock). After a brief pause, Show clock (or Hide clock) Set the time, and Time format appear in the display with Show clock (or Hide clock) highlighted.2Scroll to Set the time and press Select.3Enter the time (in hh:mm format) and press OK.4Scroll to am or pm and press Select. The time is set. • MAKE AND ANSWER CALLSNote: Your phone must be switched on to use this function. Do not switch the phone on when wireless phone use is prohibited or when it may cause interference or danger.Use the keypad1Enter the phone number (including the area code), and press the talk key.•To delete a character to the left of the cursor, press Clear.2Press the end key to end the call or to cancel the call attempt.Use the phone book1At the Start screen, press the up or down scroll key and scroll to the entry you wish to view.2Press the talk key to make the call or press Details to view details of

[ 32 DRAFT ]the entry.Tip: To quickly search the list of entries in your Phone book, press any key in which the letters match the first letter of the name for which you’re searching.Answer or reject an incoming call•Press the Talk key to answer the call•Press the end key to reject the call; the call is diverted to your voicemailIf you press Silence, only the ringing tone is muted. You can then either answer or reject the incoming call.Tip: If the HDB-4 or HDS-3 headset is connected, you can answer or end a call by pressing the key on the headset.Answer a call with the keypad lockedTo answer a call with keyguard on, simply press the talk key. During the call, all features function as normal. When you end or reject the call, the keypad automatically re-locks.Note: When Keyguard is on, calls may be possible to dial emergency numbers (for example, 911 or other official emergency numbers). Key in the emergency number and press the talk key. The number is displayed only after you have keyed in its last digit. Redial the last number1At the Start screen, press the talk key to display the last 20 numbers you have dialed.2Press the talk key to redial the last number, or scroll to the number (or name) you wish to redial and press the talk key.

[ 33 DRAFT ]Basic operationsAdjust the earpiece volume•To increase the volume of a call, press the volume up key on the left side of the phone.•To decrease the volume of a call, press the volume down key on the left side of the phone. When adjusting the volume, a bar chart appears in the display indicating the volume level. • CALL AND SETUP YOUR VOICEMAIL1Once you’ve saved the voice mailbox number, press and hold the 1 key. 2When you connect and the pre-recorded greeting begins, follow the automated instructions to setup your voicemail.Listen to your voice messagesOnce you’ve setup voicemail, you can dial the number one of 3 ways:•Dial the number using the keypad•Press and hold the 1 key•Press Listen if there’s a notification message in the displayWhen you connect and the pre-recorded greeting begins, follow the automated instructions to listen to your voice messages.Make a conference callConference calling is a network service that allows up to six persons to take part in a conference call.1Make a call to the first participant.2To call a new participant, press Options, scroll to New call, and press Select.3Enter the phone number of the new participant (or press Find to Volume key

[ 34 DRAFT ]retrieve a number from your Phone book) and press Call. The first call is put on hold.4When the new call picks up, press Options, scroll to Conference, and press Select to connect the calls.5To add a new participant to the call, repeat steps 2 through 4.HAVE A PRIVATE CONVERSATION WITH ONE OF THE PARTICIPANTS:6Press Options, select Private and select the desired participant. Rejoin the conference call as described in step 4.7To end the conference call, press the end key. • OPTIONS DURING A CALLMany of the options that you can use during a call, are network services. Press Options during a call to display those listed in the following table.•Scroll to an option and press Select to activate the option or enter its submenu Option FunctionMute Mute your voice; you can hear the other party but they can’t hear youUnmute Return to normal from mute statusEnd call End the callEnd all calls End all calls within a conference callPhone book Open the Phone book menuMenu Display the main menusHold Place the current call on holdUnhold Remove the current call from hold statusNew call Place a new call; the first call is put on holdConference Call another party and invite them into the call

[ 35 DRAFT ]Basic operationsPress Swap to switch between the active call and the call on hold, Transfer to connect a call on hold, and the end key to disconnect yourself from all calls. • SET UP YOUR PHONEUse the Optional headsetThe HDB-4 may be purchased with your phone or separately as an accessory. Connect the headset1Plug the headset jack into the Pop-PortTM connector at the bottom end of your phone.Private Have a private conversation with one participant in a conference callAnswer Answer another incoming callReject Reject a call; the calling party receives a busy signalLoudspeaker Enable the handsfree feature in your phoneHandset Disable handsfree and return to normal use (earpiece)Touch tones Send touch tones generated by your phones keypadSwap Switch between the active call and the call on holdOption Function

[ 36 DRAFT ]2Position the headset on your ear as it appears in the illustration to the right.With the headset connected, you can make, answer, and end calls as usual.•Use the keypad to enter numbers•Press the talk key to place a call•Press the end key to end a callAdjust display brightness1Press Menu 4-4-5 (Settings - Display settings - Display brightness).After a brief pause, a bar chart appears in the display indicating the current brightness level.2Press the left or right scroll keys to adjust the brightness to your preference.Change the Xpress-onTM shellsImportant: Before changing the shells, always switch off the power and disconnect the phone from the charger or any other device. Always store the phone with the shells attached.Note: To avoid fingerprints, try to keep your fingers away from your phone’s screen once the upper shell has been removed.REMOVE THE LOWER SHELL1Push the lower shell release indentions at the top of the phone.2Slide the lower shell away from the phone to remove.

[ 37 DRAFT ]Basic operationsREMOVE THE BATTERY3After you’ve removed the lower shell, grasp the removal flap and gently pull; the battery lifts from its compartment REMOVE THE UPPER SHELL4Press the metal release bumps on the sides of the phone while gently sliding the upper shell away from the rest of the phone.INSTALL THE KEY MAT AND NEW SHELLS5Remove the key mat from the old lower shell and place it into the new lower shell as shown.6Slide the upper shell over the top of the phone until it clicks into place.7Repace the battery. Position the battery so the gold contacts match up with those on the phone. The battery label should be facing away from the phone.8Insert the battery, contact end first into the battery slot.9Snap the other end of the battery into place and snap the back of the

[ 38 DRAFT ]phone closed.10 Place the phone into the lower shell. 11 Slide the shell forward until it clicks into place.

[ 39 DRAFT ]Text entry5Text entryYou can use two methods for entering text and numbers.•The standard mode is the only way to enter names into such things as the Phone book, calendar notes, and renaming caller groups•Predictive text input is a quick and easy method for writing messages • STANDARD MODEEnter text (Abc)•Press a key once to insert the first letter on the key, twice for the second letter, and so on. If you pause briefly, the last letter in the display is accepted and your phone awaits the next entry.•Press the 0 key to enter a space thereby accepting a completed word•Press the 1 key to enter a period (.)•Press the star key to display special characters. See more about special characters on the following pagesEnter numbers (123)To switch to 123 mode from Abc mode, press and hold the pound key at any message entry screen until the icon in the upper left corner of the display switches from Abc to 123 (or vice versa).CLEAR THE SCREEN•Press Clear to backspace the cursor and delete a character•Press and hold Clear to backspace continuously and delete

$[ 40 DRAFT ]Enter punctuation and special charactersWhile at any text entry screen, press the star key to display special characters (press and hold the star key if predictive text is on). The following special characters are availableUse four-way scrollingNavigate special characters using the scroll keys much as you would a joystick. Once a character is highlighted, press Insert to insert the character into your message. • PREDICTIVE TEXT INPUTPredictive text input allows you to quickly write messages using your keypad and the phone’s built-in dictionary. You can use predictive text to write messages, create a calendar notes, make to-do lists, and more.Activate/deactivate predictive text•At a text entry screen, press and hold Options. T9 prediction off or T9 prediction on appears (depending on the prior mode).OR1If predictive text is off, press Options, scroll to Predictive text, and press Select.2Scroll to the language of your choice and press Select.Predictive text is turned on. The predictive text icon () appears in ., ‘ ?!“-()@/:_;+&%*=<>£$¥¤[ ] { } \~^¡¿§#lUpDownLeft Right$

[ 41 DRAFT ]Text entrythe upper left corner of the display.Note: The Language setting in predictive text affects the time and date formats of the Clock, Alarm clock, and Calendar.Write with predictive textFor example, to write Nokia with the English dictionary selected, press each of the following keys only once: (with predictive text on). The illustration below simulates your display each time a key is pressed. 6 6 5 4 2PREDICTIVE TEXT TIPS•Press the 0 key to enter a space and begin writing the next word•If a displayed word is not correct, press the star key to see other matches•If ? appears after a word, press Spell to add the word to the dictionary•Press the 1 key to insert a period into your message•Press and hold Options to turn predictive text on and off•Press and hold the star key to display special characters. See “Enter punctuation and special characters” and “Use four-way scrolling” on the previous page for the easiest way to enter special characters

[ 42 DRAFT ]Note: Press the pound key to switch predictive text on and off or to cycle through the various modes available. As you press the pound key, the following icons (not descriptions) appear in the display:Add new words to the dictionaryIf you encounter a word that predictive text doesn’t recognize, a question mark (?) follows the word and Spell appears in the lower left of the display.•Press Spell, enter your new word using the keypad, and press Save.The word is added to the dictionary as well as the message you’re writing.NOTES ABOUT ADDING WORDS•New words that you accept by pressing Select, the 0 key, or deleting the space between two words are saved to the dictionary.•Depending on the language and the length of the words, you may be able to add hundreds of words to the dictionary.•When the dictionary is full, the most recent addition replaces the first. Uppercase textPredictive text is Off Sentence case textPredictive text is On Lowercase textPredictive text is Off Lowercase textPredictive text is On

[ 43 DRAFT ]Manage phone security6Manage phone securityLock the keypad (Keyguard)Remember to lock your phone’s keypad to prevent accidental calls. If the keypad is locked, it unlocks when you receive a call. After the call, the lock automatically reactivates.Important: When Keyguard is on, calls may be possible to dial emergency numbers (for example, 911 or other official emergency numbers). Key in the emergency number and press the talk key. The number appears in the display after you’ve keyed in the last digit.•To lock the keypad, press Menu then the star key.Unlock the keypad•At the Start screen, press Unlock then the star key. • SECURITY LEVELSThe security level determines your access to features when a “non-owner” SIM card is used. A “non-owner” SIM card is one (other than the original) that is inserted after you power off the phone. There are 3 security levels:Set your security level1At the Start screen, press Menu 4-7-5 (Settings - Security settings - Security level). Security levelsOff Owner and Non-owner cards are treated the sameMemoryNon-owner cards can access SIM memory. Any changes to the memory setting requires the security code.The owner card has access to all features, but the security code is required to change a memory settingPhone The security code is required upon power-up

[ 44 DRAFT ]2After a brief pause, you’re prompted to enter the security code. The default code is 12345. Enter the security code and press OK. 3Scroll to Off, Memory, or Phone and press Select. A message appears in the display confirming your selection • FIXED DIALINGOnce you setup and activate a fixed dialing list, your phone can make calls only to those numbers that you’ve defined in the fixed dialing list. Fixed dialing is a network feature and must be supported by your wireless provider.Note: When fixed dialing is set on, calls may be possible to certain emergency numbers in some networks (such as 911 or other official emergency numbers).Set up and activate a fixed dialing list1At the Start screen, press Menu 4-7-3 (Settings - Security Settings - Fixed dialing). After a brief pause, the options in the following table appear in the display.Note: If you activate fixed dialing and the number list is empty, all outgoing calls, except for emergency numbers such as 911, require entry of the PIN2 code.2Scroll to Number list and press Select. Fixed dialing not active and then Fixed dialing list empty appear in the display.3You’re prompted to enter the PIN2 code. Enter the PIN2 code and press OK.Fixed dialing optionsOn Activate fixed dialing (see note above)Off Deactivate fixed dialingNumber list View the numbers in your fixed dialing list

[ 45 DRAFT ]Manage phone security4Enter the fixed dialing number, or press Find to retrieve a number from your Phone book and press OK.5Enter a name for the number and press OK. A confirmation note appears in the display and you’re returned to the fixed dialing number list.6Press Back, scroll to On, and press Select to activate fixed dialing.View or edit the fixed dialing list1At the Start screen, press Menu 4-7-3 (Settings - Security Settings - Fixed dialing).2Scroll to Number list and press Select.3You’re prompted to enter the PIN2 code. Enter the PIN2 code and press OK.4Any numbers which you’ve assigned to fixed dialing appear in the display.5Scroll to a number and press Options. 6The options in the following table appear in the display.•Use the scroll keys to highlight an option•Press Select to activate or enter an option’s submenuFixed dialing number optionsView number View the number for an entryAdd Add a number to your fixed dialing listEdit Edit the highlighted entryDelete Delete the highlighted entryDelete all Delete all entries in your fixed dialing list

[ 46 DRAFT ]Notes about fixed dialing•If a SIM card with fixed dialing that is activated is inserted into a phone that doesn’t support fixed dialing, the SIM card is rejected•If you try to add a name (without a number) to the fixed dialing list, you’ll receive an error message•If you try to browse the fixed dialing list, but haven’t stored any numbers, Fixed dialing list empty appears in the display•You cannot access SIM memory manually (view or copy numbers on the SIM card) while fixed dialing is active • ACCESS CODESUse access codes to change your security code, PIN code, and PIN2 code.Note: Avoid using codes similar to emergency numbers such as 911 to prevent accidental dialing of the emergency number.The security codeThe security code controls access to features such as the security level and is supplied with the phone. The preset code is 12345.Note: If you enter the wrong security code five times in succession, you won’t be able to enter a code for five minutes, even if you power off the phone between incorrect entries.CHANGE YOUR SECURITY CODEOnce you change the security code from its preset of 12345, keep the new code secret, and in a safe place separate from your phone.1Press Menu 4-7-6-1 (Settings - Security settings - Access codes - Change security code).After a brief pause, you’re prompted to enter the current security code (default is 12345).2Enter the current security code and press OK. You’re prompted to enter the new security code.3Enter the new security code (up to 10 characters) and press OK.

[ 47 DRAFT ]Manage phone securityYou’re asked to re-enter the new security code for verification.4Enter the new security code again and press OK. A message appears in the display confirming your security code has been changed.The PIN codeThe PIN code protects the SIM card from unauthorized access. The PIN code can be 4- 8 digits in length. After three successive incorrect entries the PIN code is blocked and you’ll be asked to enter the personal unblocking key (PUK) code.Note: The PIN code must be obtained from your wireless provider. The PIN code is typically provided with your SIM card.PIN CODE REQUESTEnable your phone to request the PIN code upon power-up. This provides extra security in case your phone is lost or stolen.1Press Menu 4-7-1 (Settings - Security settings - PIN code request).2After a brief pause, you’re prompted to enter the current PIN code. Enter the PIN code and press OK.3Scroll to On and press OK. A message appears in the display confirming your selection.CHANGE YOUR PIN CODEBefore you can change your PIN code, you’ll need to enable PIN code request. See “PIN code request” immediately preceding this section.1Press Menu 4-7-6-2 (Settings - Security settings - Access codes - Change PIN code).2After a brief pause, you’re prompted to enter the current PIN code. Enter the PIN code and press OK. 3You’re prompted to enter the new PIN code. Enter the new PIN code and press OK.4You’re prompted to re-enter the new PIN code for verification. Enter the new PIN code again and press OK.

[ 48 DRAFT ]A message appears in the display confirming your PIN code has been changed.The PIN2 CodeThe PIN2 code is required for features such as Fixed dialing. If you enter an incorrect PIN2 code three times in succession, the PIN2 code is blocked and you’ll have to enter the PUK2 code.Note: The original PIN2 code must be obtained from your wireless provider.CHANGE YOUR PIN2 CODE1Press Menu 4-7-6-3 (Settings - Security settings - Access codes - Change PIN2 code). You’re prompted to enter the current PIN2 code.2Enter the current PIN2 code and press OK. You’re prompted to enter the new PIN2 code.3Enter the new PIN2 code and press OK. You’re asked to verify the new PIN2 code by entering it again.4Enter the new PIN2 code again and press OK. A message appears in the display confirming you’ve changed the PIN2 code.Personal unblocking key (PUK) codesPUK and PUK2 codes are used to restore blocked PIN and PIN2 codes. Both PUK and PUK2 codes are eight characters in length and cannot be changed. PUK and PUK2 codes must be obtained from your wireless provider.Important: If you enter an incorrect PUK or PUK2 code 10 times in succession, the message SIM rejected appears in the display and the SIM card can no longer be used. You must contact your wireless provider for a new SIM card.Closed user groupsA closed user group is a network service that specifies the group of people whom you can call and who can call you. For more information contact your network operator or service provider.

[ 49 DRAFT ]The Phone book7The Phone bookYour Phone book can save up to 300 names, with multiple numbers and text notes for each name. The amount of numbers and text entries that you can save may vary, depending on their length and the total number of entries in the Phone book.Note: This feature uses shared memory. Please see “Shared memory” on page15 for more information. • VIEW THE PHONE BOOK MENU1At the Start screen, press the right selection key under Names. The menu items in the left column of the following table appear in the display.2Scroll to an item. Press Select to activate the feature or enter its submenu.Menu item FunctionFind Find a name or select from a listAdd entry Add a name to your Phone bookEdit name Edit an existing nameDelete Delete a name and its associated numbersCopy Copy entries from Phone memory to SIM and vice versaAdd number Add a number to an existing nameSettings Set memory in use (Phone or SIM), change your Phone book view, and check the memory status of your Phone and SIM card

[ 50 DRAFT ] • SAVE NAMES AND NUMBERSYou can save names and numbers to phone memory or to SIM memory.Quickly save a name and number1At the Start screen, enter the phone number you wish to save.2Press Options, ensure Save is highlighted, and press Select.3Enter a name for the number and press OK. A confirmation message appears in the display indicating your entry has been saved.Quickly save (only) a numberYou can save a phone number as a stand-alone entry in your phonebook.1At the Start screen, enter the number you wish to save.2Press and hold Options. A message appears in the display confirming your number is saved. Save an entry using the Phone book menu1At the Start screen, press Names, scroll to Add entry and press Select.2Enter a name using the keypad and press OK.3Enter a number and press OK.1-touch dialing Display the list of 1-touch dialing numbers saved to memoryService numbers Display a list of numbers related to your wireless providerOwn numbers View the numbers (line 1, line 2, data) in use by your SIM cardCaller groups View and edit the properties (such as the ring tone) for any of the caller groupsMenu item Function

[ 51 DRAFT ]The Phone book4Press Done to return to the Start screen.Save addresses and notesTo save an email address, you’ll need to add it to an existing entry (name). 1Find the entry (name) in your Phone book to which you’d like to add an address or note.2With the entry highlighted, press Details.3Press Options, scroll to Add detail and press Select.4Scroll to the address or note of your choice and press Select.5Enter the text for the note or address and press OK.Select your Phone book view and memory1Press Names, scroll to Settings, and press Select. 2Scroll to any of the options in the following table. Press Select to enter the option’s submenu.Option FunctionMemory in use Select the memory you wish to use. Options are Phone, SIM card, or Phone and SIM combined. With Phone and SIM selected, names and numbers are saved to phone memory but entries saved to both memories appear in the displayPhone book viewSelect the Name list, Name and number, or Name only viewMemory status View the amount of phone or SIM memory used as well as the amount of phone or SIM memory available

[ 52 DRAFT ]Save multiple numbers and text items per nameYou can save different types of phone numbers and short text items per name to the Phone book. The first number you save for any entry is automatically set as the default, or primary number.1At the Start screen, press the up or down scroll key and scroll to the entry to which you wish to add a number or text item.2Press Details, and then press Options.3Scroll to Add number or Add detail and press Select.4Scroll to one of the following types and press Select: 5Enter the number or text for the type you’ve selected and press OK.•To change the type, select Change type in the options list.CHANGE THE DEFAULT (PRIMARY) NUMBER1At the Start screen, press the up or down scroll key to scroll to the entry you wish to change and press Details. 2Scroll to the number you wish to set as default and press Options.3Scroll to As primary no. and press Select.Search for a name in the Phone book1At the Start screen, press the up or down scroll key to display the contents of your Phone book.2Press the key which corresponds to the first letter of the name for which you are performing a search.3Press the up or down scroll key to scroll up and down through names in the list. Press the left or right scroll key to move the cursor left or right in the General Mobile Home Work Fax E-mail address Web address Street address Note

[ 53 DRAFT ]The Phone booksearch window at the bottom of the display, if necessary.4Press Details to view the details of the selected name.Edit a name, number or text item1Search for the entry as described in the previous section and press Details.2Scroll to the name, number or text item you wish to edit and press Options. 3Scroll to Edit name, Edit number, or Edit detail and press Select. 4Edit the name, number, or detail to your preference and press OK.Delete names and numbers1At the Start screen, press Names, scroll to Delete, and press Select.2To delete individual names and numbers, scroll to One by one and press Select. 3Scroll to the entry you wish to delete, press Delete, and press OK to confirm the deletion.4To delete the entire contents of your Phone book, scroll to Delete all, then scroll to the phone book you wish to delete (Phone or SIM card).5Press Delete, then press OK to confirm. You’re asked to enter the security code.6Enter the security code and press OK.

[ 54 DRAFT ] • COPY PHONE BOOK ENTRIES1At the Start screen, press Names, scroll to Copy, and press Select.2Scroll to From phone to SIM card or From SIM card to phone and press Select. The following options appear in the display:3Scroll to the copy method of your choice and press Select. a) If you selected One by one, go to step 4.b) If you selected All or Primary nos., go to step 6.4Scroll to the entry you wish to copy and press Copy.5Scroll to Keep original or Move original and press Select. The entry is copied and you’re returned to the list of Phone book entries.6If you selected All or Primary nos. in step 3, scroll to Keep original or Move original and press Select.7Press OK to confirm your choice. All entries are copied to the selected destination. Press Back to return to the list of Phone book entries, or press the end key to exit and return to the Start screen.Caution: Select Keep original if you’re unsure of which copy method to use. This ensures original entries are merely copied to the new location. Move original deletes files after copying.Send and receive business cardsYou can send and receive an entry in your Phone book via IR or text message, if supported by your wireless provider.RECEIVE A BUSINESS CARD VIA IR1Press Menu 12-1 (Connectivity - Infrared) to ensure IR is activated.When you receive the business card, your phone beeps and a message One by one Select and copy entries one by oneAll Copies all entries from the SIM card or Phone*Primary nos. Copies only primary numbers. This appears only if you select From phone to SIM.

[ 55 DRAFT ]The Phone bookappears in the display. 2Select Save to save the business card in the phone’s memory, or press Exit (or OK) to discard the business card.SEND A BUSINESS CARDYou can send a business card via IR or as an text message to a compatible phone or other handheld device.1Highlight an entry from the Phone book that you wish to send and press Details.2Press Options, scroll to Send bus. card and press Select.•To send the business card via IR, make sure the receiving device is set up to receive data via its IR port and select Via infrared.•To send the business card as a message, select Via text message.3If you selected Via infrared (and the entry has multiple sub-entries) scroll to Primary no. or All details and press Select. Your business card is sent.4If you selected Via text message (and the entry has multiple sub-entries), scroll to Primary no. or All details and press Select.5Enter the number for your recipient or press Find to retrieve a number from your Phone book.6Press OK and the business card is sent. • 1-TOUCH DIALINGYou can associate any entry in your Phone book with keys 2 through 9 and then dial those entries by pressing and holding the assigned key.Assign a key to 1-touch dialing1At the Start screen, press Names, scroll to 1-touch dialing and press Select.2Scroll to any empty slot and press Assign.

[ 56 DRAFT ]3Enter the number (including the area code) and press OK, or press Find to retrieve a number from your Phone book.4Enter a name for the number and press OK. •If 1-touch dialing is off, the phone displays a prompt asking if you’d like to turn 1-touch dialing on. Press Yes to activate 1-touch dialing. 5The entry appears in the slot you’ve assigned.Make a call with 1-touch dialing•Press and hold the key to which an entry has been assigned. Your phone dials the entry assigned to the key.CHANGE 1-TOUCH DIALING NUMBERS1At the Start screen, press Names, scroll to 1-touch dialing and press Select.2Scroll to the 1-touch dialing entry you wish to change and press Options.3Scroll to Change and press Select.4Enter the new number, or press Find to retrieve a number from your Phone book, and press OK.5Enter a name for the entry and press OK. DELETE 1-TOUCH DIALING NUMBERS1At the Start screen, press Names, scroll to 1-touch dialing and press Select.2Scroll to the 1-touch dialing location you wish to delete and press Options.3Scroll to delete and press Select. You’re asked to confirm the deletion.4Press OK to delete the key assignment. • VIEW INFO, SERVICE, AND OWN NUMBERSYour wireless provider may have saved your phone’s operating number, as well as various information and service numbers to your SIM card.

[ 58 DRAFT ]Setup a caller group1At the Start screen, press the up or down scroll key to display a list of entries in your Phone book.Tip: Perform a “quick find” when Phone book entries are displayed by entering the first letter of a name. appears at the bottom of the display to indicate you’re performing a search.2Scroll to a name you’d like to add to a caller group and press Details.3Press Options, scroll to Caller groups, and press Select.4Scroll to the caller group to which you’d like to add the name and press Select. A confirmation message appears in the display.

[ 59 DRAFT ]Menu functions8Menu functionsMessages (Menu 1)If you’ve subscribed to a message service, you can send and receive messages to compatible phones that are also subscribed to a message service. You can also send and receive picture messages, multimedia messages, and e-mail if supported by your network. Composed messages can be up to 450 characters in length. Linked messagesYour phone can send and receive long messages (up to 450 characters) in sequences. While receiving linked messages, you can start reading the first part before the phone has received the entire message.While viewing the message, you may see *some text missing* on the display. This is normal, and the message content will be updated as soon as the missing sequence arrives.If the memory is full, you may have to delete a message from your inbox or outbox before your phone can update the missing text.Before you can send and receive messagesYou’ll need the following to send and receive messages:•A messaging service through your wireless provider•A message center number, which must be saved to your phone (if your wireless provider hasn’t done so already)

[ 62 DRAFT ]Use predictive textFor example, to write Nokia, with the English dictionary selected, press each of the following keys once: (with predictive text on):6 6 5 4 2The illustration above simulates your display each time a key is pressed.•Press the 0 key to enter a space and begin writing the next word.•If a displayed word is not correct, press the star key to see other matches. To return to the previous word in the list of matches, press Previous.•If ? appears after a word, press Spell to add the word to the dictionary.•Press the 1 key to insert a period into your message.•Press and hold the star key to display special characters. Press the star key again to cycle through all available characters. See “Use special characters” in the following section for more information on special characters.Note: Press the pound key to switch predictive text on or off and to use predictive text in various modes. As you press the pound key, the following icons (not the descriptions) appear in the upper left of the display: Uppercase textPredictive text is Off Sentence case textPredictive text is On Lowercase textPredictive text is Off Lowercase textPredictive text is On

$[ 63 DRAFT ]Menu functionsAdd new words to the dictionaryIf you encounter a word that predictive text doesn’t recognize, a question mark (?) follows the word and Spell appears in the lower left of the display.•Press Spell, enter your new word using the keypad, and press Save.The word is added to the dictionary as well as the message you’re writing.NOTES ABOUT ADDING WORDS•New words that you accept by pressing Select, the 0 key, or deleting the space between two words are saved to the dictionary.•Depending on the language and the length of the words, you may be able to add hundreds of words to the dictionary.•When the dictionary is full, the most recent addition replaces the first.Use special charactersWhile entering text, press and hold the star key to display the following special characters. Press the star key again to cycle through all available characters:., ‘ ?!“-()@/:_;+&%*=<>£$¤[ ] { } \~^¡¿§#$

[ 64 DRAFT ]Use four-way scrollingIn features, such as the calendar monthly view, text messages, and special characters, you can move the cursor up and down as well as left and right. • WRITE AND SEND A TEXT MESSAGENote: This feature uses shared memory. Please see “Shared memory” on page15 for more information.1At the Start screen, press Menu 01-1-1 (Messages - Text messages > Create message).Tip: To go quickly to the Create message display, press the left scroll key at the Start screen.2After a brief pause, the message entry screen appears in the display.3Compose a message using the keypad and press Options.4Scroll to Send and press Select.5Enter the recipient’s phone number, or press Find to retrieve a number from your Phone book, and press OK. Your message is sent.Read messagesWhen you receive a message, your phone beeps and Message received appears in the display as well as the unopened letter icon ( ).1Press Show to read the message, or Exit to move it to your inbox.Note: When you have unopened messages in your inbox, is shown in the upper left corner of the Start screen as a reminder.2Use the up and down scroll keys to view the whole message if necessary. Left, press the left scroll keyUp, press the up scroll keyDown, press the down scroll keyRight, press the right scroll key

[ 65 DRAFT ]Menu functionsTip: Keep scrolling to view other information, such as the sender number and time the message was sent.3Press Back to move the message to the Inbox, or press Options for other choices, such as Reply or Forward.Read linked messagesYour phone can receive one long message (up to 459 characters) in sequences. You can start reading the first part before the phone has received the entire message.While viewing the message, you may see *some text missing* on the display. This is normal, and the message content will be updated as soon as the missing sequence arrives.If the memory is full, you may have to delete a message from your inbox or outbox before your phone can update the missing text.Reply to a message1While viewing a message, press Options, scroll to Reply, and press Select.2Compose your reply using the keypad, then press Options, scroll to Send, and press Select. 3The number of the original sender appears in the display. Press OK and your reply is sent.Forward a message1While viewing a message, press Options. 2Scroll to Forward and press Select.3Enter the recipient’s phone number, or press Find to retrieve a number from your Phone book.4Press OK. The message is forwarded.

[ 66 DRAFT ] • PICTURE MESSAGESNote: This feature uses shared memory. Please see “Shared memory” on page15 for more information.Your phone comes with 10 pre-loaded pictures. You can, however, over-write any of the 10 pictures that come with your phone. Pictures can be attached to a message and sent via text message to compatible phones. Picture messages behave the same as text messages, but pictures take up more space than text. Pictures are stored in the “Templates” folder under Messages - Templates.Note: You cannot send a picture message via e-mail.Download picturesYour phone can download pictures, or receive them from compatible phones via text messaging to use in messages. You can also create pictures and send them to your phone or other compatible phones using Nokia PC Suite.Note: This function can be used only if it is supported by your wireless provider. Only phones that offer picture message features can receive and display picture messages. Contact your wireless provider for details.When you receive a picture messageWhen you receive a picture message, your phone beeps and Message received appears in the display as well the message icon ( ).1Press Show to view the picture message, or press Exit to move it to your inbox.2If you have more than one picture message, scroll to the message of your choice and press Select to view the message.Note: When you have unopened picture messages in your inbox, is shown in the upper left corner of the Start screen as a reminder.3Use the scroll keys to view the whole picture if necessary.

[ 67 DRAFT ]Menu functionsTip: Keep scrolling to view other information, such as the sender number and time the message was sent.4Once you’re finished, press Back to move the picture message to the Inbox, or press Options for other choices, such as Reply or Forward.TO SAVE THE PICTUREIf you’d like to save the picture to your Templates folder for later use:1Press Options, scroll to Save picture, and press Select. You can then enter a title for the picture and press OK.Note: If your templates folder is full of pictures, just scroll to the picture you’d like to replace and press Select.Compose and send a picture messageOne picture message is equivalent in size to 3 text messages. When you insert a picture into a message, you’ll have enough remaining space for about 121 characters in the message. If you try and insert a picture into a message that is almost full of text, a beep sounds and you’re prompted to delete some text before proceeding.1At the Start screen, press Menu 01-1-1 (Messages - Text messages - Create message). After a brief pause, the message edit screen appears in the display.2Write a message using the keypad (or enter nothing if you choose to just send a picture), and press Options.Tip: Insert pictures before adding text. You can then check remaining space for text in the upper right corner of the display.3Scroll to Insert picture and press Select. A list of pictures appears in the display.4Scroll to a picture and press View.5Press Insert to insert the picture into your message, otherwise:a) Press Back, scroll to another picture, and press View again.b) Press Insert to insert the picture into your message.

[ 69 DRAFT ]Menu functionsWrite and send e-mailNote: See “Tips for composing a message” on page61 for ways to write messages faster.1At the Start screen, press Menu 01-1-2 (Messages - Text messages - Create e-mail).After a brief pause, you’re prompted to enter the e-mail address.2Enter the e-mail address, or press Find to retrieve an e-mail address from your Phone book, and press OK.3Enter a subject for the e-mail and press OK.4Compose your e-mail using the keypad and press Options.Tip: Be sure and leave enough space in the total character count (160) for the e-mail address.5Scroll to Send e-mail, if necessary, and press Select. Your e-mail is sent.Reply to a message or e-mailWhen you have received a text message or e-mail, , the number of new messages and ___ Message(s) received appears in the display.Note: The blinking indicates that the message memory is full. Before you can receive new messages, delete some of your old messages. See “Delete messages” on page82 for more information.•Press Show to view the message now, or Exit to view it later.READING THE MESSAGE LATER:1Press Menu, and select Messages, Text messages and Inbox.2If more than one message is received, select the message you want to read and press Select.An unread text message is indicated by in front of the message, and an unviewed picture message by .

[ 70 DRAFT ] • MULTIMEDIA MESSAGESNote: This feature uses shared memory. Please see “Shared memory” on page15 for more information.A multimedia message (MMS) can contain text, images, and sounds. Your phone has a multimedia message viewer for playing messages and a multimedia inbox for storing saved messages. Once you save the multimedia message, you can use the image as a screen saver or the sound as a ringing tone.Note: This function can be used only if it is supported by your wireless provider. Only compatible devices can receive and display multimedia messages.A multimedia message can contain text, images and sounds. Your phone supports multimedia messages of up to 45 kB. If the maximum size is exceeded, the phone may not be able to receive the message. Depending upon your network, you may receive a message that includes an Internet address where you can go to view the multimedia message.Pictures included in multimedia messages are scaled down to fit the size of your display.Note: The default setting of the multimedia message service is on, and your wireless provider may charge for messages received.Multimedia messaging supports the following formats:•Picture: JPEG, GIF, PNG, OTA-BMP and WBMP.•Sound: MIDINote: If a received message contains unsupported elements, they may be replaced with the text Object format not supported

[ 71 DRAFT ]Menu functionsDefine MMS settingsBefore you can use the multimedia message feature, you need to first define the way you want to receive the messages.ALLOW MULTIMEDIA RECEPTIONYou can choose to receive all messages or to receive messages only when you are in the service provider’s home network.1At the Start screen, press Menu 01-6-2-2 (Messages - Message settings - Multimedia msgs. - Allow multimedia reception). After a brief pause, a list of options appears in the display.•Yes to allow all incoming messages•In home system to allow incoming messages only if you are in the service provider’s home system.2After selecting one of the reception options, scroll to Incoming multimedia messages, then press Select.3Scroll to Retrieve, then press Select.BLOCK MULTIMEDIA RECEPTION1At the Start screen, press Menu 01-6-2-2 (Messages - Message settings - Multimedia msgs. - Allow multimedia reception). After a brief pause, a list of options appears in the display.2Scroll to No and press Select. ALLOW OR NOT ALLOW ADVERTISEMENTS1At the Start screen, press Menu 01-6-2-5 (Messages - Message settings - Multimedia msgs. - Allow advertisements). After a brief pause, Yes and No appear in the display.2Scroll to the setting of your choice and press Select.

[ 72 DRAFT ]Other MMS settingsOther multimedia settings include saving your messages to the Sent items folder and editing your connection settings.1At the Start screen, press Menu 01-6-2 (Messages - Message settings - Multimedia msgs.). After a brief pause, a list of options appears in the display.2Scroll to an option. Press Select to activate the option or to enter its submenu.Edit multimedia connection settings1At the Start screen, press Menu 01-6-2-4 (Messages - Message settings - Multimedia msgs. - Connection settings).2Scroll to Edit active multimedia settings and press Select.MessageSetting FunctionSave sent messages Saves sent multimedia messages to the Sent items folderAllow multimedia receptionChooses Yes, No, or In home network for your multimedia service. In home network can’t receive multimedia messages outside the home network.Incoming multimedia messagesSelect Retrieve to receive multimedia messages, or Reject if you don’t wish to receive multimedia messages.Connection settings Define WAP settings for retrieving multimedia messages. Activate the set where you want to save the connection settings and then edit the settings.Allow advertisements Allows you to enable or disable reception of automatic multimedia advertisements

[ 73 DRAFT ]Menu functions3The connection settings in the following table appear in the display. Scroll to a setting. Press Select to enter the setting’s submenu.ABOUT CONNECTION SETTINGSYou may be able to receive multimedia connection settings as a text message from your wireless provider. For more information, contact your wireless provider.SELECT A FONT SIZE FOR YOUR MESSAGES1Press Menu 01-6-3-1 (Messages - Message settings - Other settings - Font size). After a brief pause a list of choices appear in the display.2Scroll to Small font or Large font and press Select. A message appears in the display confirming your selection.Connection setting FunctionSettings’ name Rename the setting to your preferenceHomepage Enter the homepage where your browser retrieves multimedia messagesSession mode Select session modes Temporary or PermanentData bearer Select the data bearerGPRS access point Define the access pointIP address Enter or change the IP addressAuthentication type Select from Normal or SecureUser name Edit or enter your user namePassword Edit or enter a password

[ 74 DRAFT ]Write and send a multimedia messageFor availability and subscription to the multimedia messaging service, contact your wireless provider.1At the Start screen, press Menu 01-2-1 (Messages - Multimedia messages - Write message). After a brief pause, the message entry screen appears in the display.2Enter the text of your message and press Options.3Scroll to Insert image or Insert sound clip and press Select.4Choose your image or sound clip from the list and press Select.5Scroll to Send to number or Send to e-mail and press Select.Note: If you’ve attached a picture or sound clip to the message, you cannot send the message via e-mail.6Enter the number of the recipient, or the e-mail address and press Select. The message is sent.Read and reply to a multimedia messageWhen a multimedia message is being received, appears (blinking) in the display. Once the message has been fully downloaded, and Multimedia message received appears in the display.1To view the message, press Show. To view the message later, press Exit (and then No when asked to discard).2While viewing the message, press Options. Some or all of the following options may appear in the display. Scroll to an option and press Select to activate the option or enter its submenu.Option FunctionDelete message Delete a saved messageReply Reply to the message. Press Options and then Send. The sender’s phone number or e-mail is used as the defaultForward to no. Forward the message to another number

[ 75 DRAFT ]Menu functionsNote: If blinks and Multimedia memory full, view waiting msg. appears in the display, memory for multimedia messages is full. You need to delete some of your old messages. See “Delete messages” on page82 for more information.ChatYou can have a conversation with another person using this “faster text messaging” application. You can’t save messages, but you can view them while chatting. Chat messages costs about the same as text messages.START A CHAT SESSION1At the Start screen, press Menu 01-3 (Messages - Chat). After a brief pause, you’re prompted to enter the recipient’s phone number.2Enter the recipient’s number or press Find to retrieve a number from the phone book, and press OK.3Enter your Chat name (up to 5 characters) and press OK.Another way to start a chat: When you have received a message, press Show to read it. To start a chat, press Options and select Chat.4Enter your chat message using the keypad. For faster ways to write a message, see “Write with predictive text” on page41.Forward to e-mail Forward the message to an e-mail addressEdit Edit the message. You can only edit messages that you’ve writtenDetails View the message subject, size, and classPlay Listen to a sound clip in the message, if one is includedSave tone Save a ringing tone, if included, to the galleryZoom in Enlarge the pictureSave image Save any picture that is attached to your picture galleryOption Function

[ 77 DRAFT ]Menu functionsTip: Save yourself the trouble of entering the mailbox codes each time you dial voicemail. See “Automate voicemail” later in this section for more information.Call and setup your voicemail1Once you’ve saved the voice mailbox number, press and hold the 1 key. 2When you connect to voicemail and the pre-recorded greeting begins, follow the service’s automated instructions to setup your voicemail.Listen to your voice messagesOnce you’ve setup voicemail, you can dial the number in one of 4 ways:•Dial the number using the keypad•Press and hold the 1 key•Press Listen if there’s a notification message in the display•Press Menu 01-4-1 (Messages - Voice messages - Listen to voice messages). After a brief pause, your phone dials the voicemail number.Once you connect and the pre-recorded greeting begins, follow the automated instructions to listen to your voice messages. • AUTOMATE VOICEMAILYou can insert special characters called “dialing codes” into phone numbers such as voicemail and then save the number to a 1-touch dialing location. Dialing codes instruct the receiving system to pause, wait, bypass, or accept the numbers that follow them in the dialing string.Note: Each voicemail service can vary. The examples and steps that follow are for clarification. Check with your wireless provider if you have specific questions about your voicemail service.Write down some information1Write down your voice mailbox number.

[ 78 DRAFT ]2Call and check your voicemail as you normally would.3Write down your interaction with the recorded prompts step-by-step. Keep in mind that each voicemail service may vary. However, it should look something like this:Dial 2145551212, pause 5 seconds, press 1, pause 2 seconds, press 1234, press pound key.Important: Be precise, you’ll need this information in “Setup voicemail with dialing codes” later in this section.LEARN HOW TO INSERT DIALING CODESPress the star key repeatedly to cycle through dialing codes. Once the desired code appears in the display, pause briefly and the code is inserted into the dialing string.For example, press the star key four times to display the “w” (wait character). Pause briefly and the wait character is inserted into the dialing string. Available dialing codes are as follows:Setup voicemail with dialing codes1At the Start screen, press Names, scroll to 1-touch dialing, and press Select.2Scroll to an empty 1-touch dialing slot and press Assign.3Enter your voice mailbox number, including the area code.4Refer to the table entitled “dialing codes,” and enter any codes as necessary using the information that you wrote down earlier.Dialing codes*Bypasses a set of instructions+Precedes an international telephone numberpPauses for 2.5 seconds before sending any numbers that followwWait. Your phone waits for you to press the talk key before it sends any numbers or codes that follow.

[ 79 DRAFT ]Menu functionsFor example, if you pause for 5 seconds after connecting to voicemail, enter p twice after the voice mailbox number, such as 2145551212pp.5Enter any remaining pauses, PIN codes, and other information that allows you to listen to your messages, then press OK.6Enter a name (such as Voicemail) and press OK. A message appears in the display confirming your 1-touch dialing location has been saved.Now, to dial and listen to your voicemail, just press and hold the assigned 1-touch dialing key at the Start screen. No other keypresses should be necessary to connect and listen to your messages. • MESSAGE OPTIONSSome or all of the options in the following table are available for text messages, picture messages, multimedia messages, and e-mail.1While viewing a text, picture, multimedia message, or e-mail press Options.2Scroll to highlight an option. Press Select to activate the option or enter its submenu.Option FunctionDelete Delete the message you’re viewingReply Reply to the message; you’ve the option to include the Original text in the reply, a template, or empty screenUse detail Extract numbers, e-mail addresses and website addresses from the current messageForward Forward the message to another recipientEdit Edit the messageMove Move the message to a folder you specify

[ 80 DRAFT ] • ORGANIZE MESSAGES WITH FOLDERSSave messages to foldersYou can save messages to an existing folder or to a folder that you’ve created.1Press Menu 01-1-1 (Messages - Text message - Create message). After a brief pause, the message entry screen appears in the display.2Write your message and press Options.3Scroll to Save message and press Select.4Scroll to the Archive, Templates, or My folders (if you’ve created a folder of your own) and press Select. The message is saved.View saved messages1At the Start screen, press Menu 01-1 (Messages - Text messages).2After a brief pause, scroll to the folder containing the message you wish to view and press Select.3Once the folder opens, scroll to the message you wish to view and press Select.Inbox folderMessages are automatically stored in the inbox after they’ve been read or if you press Back when Message received appears on the Start screen.Rename Rename the message before it’s saved to a folderCopy to Calendar Copy text from the beginning of the message to your phone’s calendar as a reminder note for the current day.Message details View the sender’s name and phone number, the message center used, reception date and time.Option Function

[ 81 DRAFT ]Menu functionsArchive folderStore messages that have been read in the Archive folder.Templates folderPictures and pre-written templates are stored in the Templates folder. Pre-loaded templates can be edited/customized.My foldersKeep your messages organized by creating custom folders and saving some of your messages there.ADD A FOLDER OF YOUR OWN1At the Start screen, press Menu 01-1-7 (Messages - Text messages - My folders). After a brief pause, the folder opens. 2Press Options. Scroll to Add folder and press Select.3Enter a name for the new folder and press OK. The folder is added.REMOVE A FOLDEROnly folders created in My folders can be deleted. The Inbox, Outbox, Archive, and Template folders are protected. When you delete a folder, all messages in the folder are also deleted.1At the Start screen, press Menu 01-1-7 (Messages - Text messages - My folders). After a brief pause, the folder opens.2Any folders that you’ve created appear in the display. Scroll to the folder you wish to remove and press Options. 3Scroll to Delete folder and press Select. You’re asked to confirm the deletion.4Press OK to delete or Back to exit.Move a message to a folder1While viewing the message, press Options.2Scroll to Move and press Select.3Scroll to the destination folder and press Select.

[ 82 DRAFT ] • DELETE MESSAGESIf your message memory is full and you have more messages waiting at the network, blinks in on Start screen. You can do the following to create more space:•Read some of the unread messages and then delete them•Delete messages from some of your foldersDelete a single messageTo delete a single message, you need to open it first.1Press Menu 01-1 (Messages - Text messages). After a brief pause, a list of options appears in the display.2Scroll to the folder containing the message you wish to delete and press Select. A list of messages, if you have any, appears in the display.3Scroll to the message you wish to delete and press Select. The message opens.4Press Options, scroll to Delete, and press Select.5You’re asked to confirm the erasure. Press OK to delete the message or Back to exit.Delete all messages in a folder1At the Start screen, press Menu 01-1-8 (Messages - Text messages - Delete messages). After a brief pause, a list of your folders appears in the display.2Scroll to the folder containing the messages you wish to delete and press Select. You’re asked to confirm your erasure.Important: If you select All messages, it deletes any messages which have been read in all of the folders.3Press OK to empty the folder.

[ 84 DRAFT ]OVERWRITE SETTINGS FOR TEXT, E-MAIL, AND PICTURE MESSAGESWhen the message memory is full, your phone can’t send or receive any new messages. However, you can set your phone to automatically replace old messages in the Inbox and Outbox folders when new ones arrive.1Press Menu, 01-6-1 (Messages - Message settings - Text messages). After a brief pause, a list of options appear in the display.2Scroll to Overwriting in sent items or Overwriting in inbox and press Select. 3Scroll to Allowed and press Select to replace the old messages with new ones in the Sent items or Inbox folder, respectively.Change multimedia message settings1At the Start screen, press Menu 01-6-2 (Messages - Message settings - Multimedia msgs.). After a brief pause, a list of options appears in the display.2Scroll to an option. Press Select to activate the option or to enter its submenu.Message setting FunctionSave sent messages Saves sent multimedia messages to the Sent items folderAllow multimedia receptionChooses Yes, No, or In home network for your multimedia service. In home network can’t receive multimedia messages outside the home networkIncoming multimedia messagesSelect Retrieve to receive multimedia messages, or Reject if you don’t wish to receive multimedia messagesAllow advertisement Allows you to enable or disable reception of automatic multimedia advertisements

[ 85 DRAFT ]Menu functionsRECEIVE MULTIMEDIA CONNECTION SETTINGS AS A TEXT MESSAGEYou may be able to receive multimedia connection settings as a text message from your wireless provider. For more information, contact your wireless provider.SELECT A FONT SIZE1Press Menu 01-6-3-1 (Messages - Message settings - Other settings - Font size). After a brief pause, a list of choices appear in the display.2Scroll to Small font or Large font and press Select. A message appears in the display confirming your selection.Use the info message serviceWith the info message network service, you can receive short text messages on various topics, such as weather and traffic conditions, from your wireless provider. 1At the Start screen, press Menu 01-5 (Messages - Info messages). After a brief pause, the list of options in the following table appears in the display.2Scroll to an option. Press Select to activate the option or to enter its submenu.Message setting FunctionInfo service Select On or Off to activate or deactivate the serviceTopics Options for selecting, adding, editing, and deleting info topicsLanguage Select the language in which info messages are received. The language you select does not affect the language you select under the Phone settings menuInfo topics saved on SIM cardSelect one or more info topics to save to your SIM card

[ 86 DRAFT ]Note: For more information on topics, contact your wireless provider.Use service commandsUse the Service commands editor to enter and send service requests (also known as USSD commands) to your wireless provider. Contact your wireless provider for information about specific service commands.1At the Start screen, press Menu 01-7 (Messages - Service commands).2Enter a service request, such as an activation command for a specific network service, and press Send.

[ 87 DRAFT ]Menu functionsCall log (Menu 2) Call log stores information about the last 10 missed, 10 received, or 20 dialed calls. It also adds the total duration of all calls. When the number of calls exceed the maximum, the most recent call replaces the oldest. For Call log to work properly:•Your wireless provider must support caller ID, and it must be enabled•Your calls can’t be blocked•Your phone must be on and within the service area • CALL LOG OPTIONSWhether you are viewing missed, received, or dialed calls, each of the menu options will be the same. Please refer to the following table regarding menu options for these features.Missed, received, and dialed call optionsCall time Display the date and time of the callSend message Send a message to the numberView number Display the numberEdit number Edit the number and associate a name with the numberSave Enter a name for the number and save it to your Phone bookAdd to name Add the number to an existing entry in your Phone book, if the number is not associated with a nameDelete Clear the number from memoryCall Call the number

[ 88 DRAFT ] • VIEW MISSED CALLSMissed calls are calls that were never answered. You can check for missed calls in two ways:Note: The Missed calls feature does not function while your phone is off or outside of the service area.1If # missed call appears in the display, press List. The phone number appears in the display.2Press Options to display the options listed in the table on page87.3Scroll to an option, press Select to activate the option or to enter its submenu.OR1At the Start screen, press Menu 2-1 (Call log - Missed calls).After a brief pause, a list of missed calls appears in the display (if any exist).2Scroll to a name or number and press Options to display the options listed in the table on page87.3Scroll to an option, press Select to activate the option or to enter its submenu. • VIEW RECEIVED CALLSReceived calls are calls that have been answered.1At the Start screen, press Menu 2-2 (Call log - Received calls).After a brief pause, a list of received calls appears in the display (if any exist).2Scroll to a name or number and press Options to display the options listed in the table on page87.3Scroll to an option, press Select to activate the option or enter its submenu.

[ 89 DRAFT ]Menu functions • VIEW DIALED NUMBERSYou can view dialed numbers in one of two ways:1At the Start screen, press the talk key. Your most recently dialed numbers appear in the display.OR2At the Start screen, press Menu 2-3 (Call log - Dialed numbers). After a brief pause, your most recently dialed numbers appear in the display.3Scroll to a name or number and press Options to display the options listed in the table on page87.4Scroll to an option, press Select to activate the option or enter its submenu.Call timesYou can receive up to five calls from the same number and view the time each call occurred. Your clock must be set for this feature to work accurately. See “Set the clock” on page31 for instructions on setting your clock.1While viewing a missed or received call, press Options, scroll to Call time, and press Select.2The time that the last call occurred appears in the display. 3Press the down scroll key to view other call times from this number. Press Back to return to the options list. • CLEAR CALL LISTSTo clear any missed, dialed, or received calls from your phone’s memory:1At the Start screen, press Menu 2-4 (Call log - Delete recent call lists).After a brief pause, All, Missed, Received and Dialed appear in the display.2Scroll to the call type you’d like to clear and press Select.

[ 90 DRAFT ] • VIEW CALL DURATION1Duration of last call. At the Start screen, press Menu 2-5-1 (Call log - Call timers - Duration of last call). The duration of your last call appears in the display.2Duration of dialed calls. At the Start screen, press Menu 2-5-2 (Call log - Call timers - Duration of dialed calls). The duration of all dialed calls appears in the display.3Duration of received calls. At the Start screen, press Menu 2-5-3 (Call log - Call timers - Duration of received calls). The duration of all received calls appears in the display.4Duration of all calls. At the Start screen, press Menu 2-5-4 (Call log - Call timers - Duration of all calls). The duration of all calls (missed, dialed, and received) appears in the display.

[ 94 DRAFT ]Settings (Menu 4)Set the clock1At the Start screen, press Menu 4-1-1 (Settings - Time and date settings - Clock). After a brief pause, Show clock (or Hide clock) Set the time, and Time format appear in the display with Show clock (or Hide clock) highlighted.2Scroll to Set the time and press Select.3Enter the time (in hh:mm format) and press OK.4Scroll to am or pm and press Select. The time is set.Show/hide the clockYou have the option of displaying (or not displaying) the clock on the Start screen.1At the Start screen, press Menu 4-1-1 (Settings - Time and date settings - Clock). After a brief pause, Show clock (or Hide clock) Set the time, and Time format appear in the display with Show clock (or Hide clock) highlighted.2Press Select.•If your clock was previously “hidden,” (not shown on the display), it will now appear in the upper right corner of the Start screen.•If your clock was previously shown in the display, it will now be hidden from view.Change the time formatYou can set the time format for am/pm or 24 hour format (military time).1At the Start screen, press Menu 4-1-1 (Settings - Time and date settings - Clock).

[ 95 DRAFT ]Menu functionsAfter a brief pause, Show clock (or Hide clock) Set the time, and Time format appear in the display with Show clock (or Hide clock) highlighted.2Scroll to Time format and press Select.3Scroll to 24-hour or am/pm and press Select. A message appears in the display confirming your selection.Set the date1At the Start screen, press Menu 4-1-2 (Settings - Time and date settings - Date). After a brief pause, a list of options appears in the display.2Scroll to Set the date and press Select.3Enter the date and press OK. The date is set.Set or change the date format1At the Start screen, press Menu 4-1-2 (Settings - Time and date settings - Date). 2Scroll to Date format and press Select. 3Scroll to the format of your choice and press Select.4Scroll to the date separator of your choice (period, slash, hyphen, or space) and press Select. A message appears in the display confirming your selection. • CALL SETTINGSCall forwardingCall forwarding tells your network to redirect incoming calls to another number.Note: Call forwarding is network-dependent and may not work the same in all networks. Contact your wireless provider for availability.

[ 96 DRAFT ]ACTIVATE CALL FORWARDINGNote: This is a network dependent feature. All options listed in the following table may not appear in the display. Contact your wireless provider for more information.1At the Start screen, press Menu 4-2-2 (Settings - Call settings - Call forwarding).2After a brief pause, the forwarding options listed in the following table appear in the display.3Scroll to the option of your choice and press Select.4Scroll to Activate and press Select.5Scroll to the destination to which your calls will be forwarded (such as To other no.) and press Select.6Enter the number to which your calls, data, or other information will be forwarded and press OK.Forward all voice calls Forward all calls to the number you specifyForward if busy Forward incoming calls when you’re in a callForward if not answered Forward incoming calls to another number if you’re unable to answer. You can also set a delay before forwarding takes placeForward if out of reach Forward incoming calls when your phone is offForward when not able to take calls Forward calls that aren’t picked up. You can also set a delay before forwarding takes placeForward all fax calls Forward all fax calls to a fax mailboxForward all data calls Forward all data calls to a data mailboxCancel all call forwarding Cancel any call forwarding options you may have set

[ 97 DRAFT ]Menu functionsYour phone calls the network to activate the feature you’ve requested. The network sends a confirmation note when the feature has been activated successfully.CANCEL CALL FORWARDING•At the Start screen, press Menu 4-2-2-8 (Settings - Call settings - Call forwarding - Cancel all call forwarding).Note: Cancel all call forwarding may affect your ability to receive voice mail messages. Contact your wireless provider for specific details.Automatic volume controlAutomatic volume control automatically adjusts your phone’s earpiece volume according to the noise level in your environment. If the environmental noise level changes, automatic volume control adjusts the earpiece’s volume level accordingly.Note: Setting automatic volume control during an active call affects only the current call. Automatic volume control is available only in handportable mode.ACTIVATE AUTOMATIC VOLUME CONTROL VIA THE MENU1At the Start screen press Menu 4-2-1 (Settings - Call settings - Automatic volume control).2Scroll to Off or On and press Select. The default setting is Off.ACTIVATE AUTOMATIC VOLUME CONTROL DURING A CALL 1During a call, press Options.2Scroll to Auto volume on and press Select.•To deactivate, scroll to Auto volume off and press Select. If you increase the volume during an active call by pressing the volume key , the phone’s volume level increases regardless of whether or not automatic volume control is activated.When you end the call, the volume returns to the level set before automatic volume control was activated.

[ 98 DRAFT ]Anykey answerAnykey answer allows you to answer an incoming call by briefly pressing any key except the power key,the left scroll key, the right scroll key, and the end key.1At the Start screen, press Menu 4-2-3 (Settings - Call settings - Anykey answer). After a brief pause, On and Off appear in the display.2Scroll to your choice and press Select.Automatic redialOccasionally, your network may experience heavy traffic, resulting in a “fast” busy signal when you dial. With automatic redial activated, your phone redials the number up to 10 times, and notifies you once the network becomes available.ACTIVATE OR DEACTIVATE AUTOMATIC REDIAL1At the Start screen, press Menu 4-2-4 (Settings - Call settings - Automatic redial). After a brief pause, On and Off appear in the display.2Scroll to your choice and press Select.1-touch dialingYou can assign any entry in your Phone book to keys 2 through 9, and then dial those entries by pressing and holding the assigned key.ASSIGN A KEY TO 1-TOUCH DIALING1At the Start screen, press Names, scroll to 1-touch dialing and press Select.2Scroll to any empty slot and press Assign.3Enter the number (including the area code) and press OK, or press Find to retrieve a number from your Phone book.4Enter a name for the number and press OK.MAKE A CALL WITH 1-TOUCH DIALING•Press and hold the key to which an entry has been assigned.

[ 99 DRAFT ]Menu functionsOR•Press the key to which an entry has been assigned and then press the talk key. Call waitingIf supported by your wireless provider, call waiting notifies you of an incoming call even while you’re in a call. You can then accept, reject, or ignore the incoming call.ACTIVATE CALL WAITING1Press Menu, scroll to Settings, and press Select.2Scroll to Call settings and press Select. 3Scroll to Call waiting and press Select.4Scroll to Activate and press Select.USE CALL WAITING•During a call, press the talk key to answer the waiting call. The first call is put on hold. •Press the end key to end the active call.Activate/deactivate summary after callYour phone can display the time spent on a call when you hang up. TURN ON SUMMARY AFTER CALL1At the Start screen, press Menu 4-2-6 (Settings - Call settings - Summary after call). After a brief pause, On and Off appear in the display. 2Scroll to On and press Select.TURN OFF SUMMARY AFTER CALL1At the Start screen, press Menu 4-2-6 (Settings - Call settings - Summary after call). After a brief pause, On and Off appear in the display. 2Scroll to Off and press Select.

[ 100 DRAFT ]Send my caller identity with next callYou can prevent your number from being displayed on the receiving party’s caller ID. This feature is network dependent and works on a call-by-call basis. Contact your wireless provider for more information.1At the Start screen, press Menu 4-2-8 (Settings - Call settings - Send my caller identity). After a brief pause, Default, Yes, and No appear in the display.2Scroll to the selection of your choice and press Select. A message appears in the display confirming your selection.Select a line for outgoing callsNote: This is a network dependent feature. Check with your wireless provider for availability and a description of the feature. 1At the Start screen, press Menu 4-2-9 (Settings - Call settings - Line for outgoing calls). After a brief pause, Line 1 and Line 2 appear in the display.Important: If you select Line 2 and have not subscribed to this network service, you will not be able to place calls. However, calls on both lines can be answered regardless of the selected line.2Scroll to Line 1 or Line 2 and press Select. A message appears in the display confirming your selection.Tip: If supported by your SIM card, you can prevent the line selection by using the Lock option. • PHONE SETTINGSSet the display language1At the Start screen, press Menu 4-3-1 (Settings - Phone settings - Language).After a brief pause, Automatic, English, Português, Español, and Français appear in the display.

[ 101 DRAFT ]Menu functions2Scroll to the language of your choice and press Select.Note: The Language setting affects the time and date formats of the Clock, Alarm clock, and Calendar.ACTIVATE OR DEACTIVATE AUTOMATIC KEYGUARDImportant: When keyguard is on, it may be possible to dial emergency numbers (for example, 911 or other official emergency numbers). Key in the emergency number and press the talk key. The number is displayed only after you have keyed in its last digit.You can set the keypad of your phone to lock automatically after a preset time delay (from 10 seconds to 60 minutes). When the preset delay expires, the keypad locks automatically.1At the Start screen, press Menu 4-3-2 (Settings - Phone settings - Automatic keyguard). After a brief pause, On and Off appear in the display.2Scroll to On (or Off to deactivate) and press Select. 3If you selected On, Set delay appears in the display. 4Enter the delay (in minutes and seconds) and press OK.Cell info displayNote: Cell info display is network-dependent and may not work the same in all networks. Contact your wireless provider for availability.When this function is selected, your phone will indicate when it is used in a system cell based on Micro- Cellular Network technology. MCN technology increases the capacity of wireless networks in urban areas. The setting will remain in effect even if the SIM card is changed or the phone is switched off.1Press Menu 4-3-3 (Settings - Phone settings - Cell info display). After a brief pause, On and Off appear in the display.2Scroll to On (or Off) and press Select. A message appears in the display confirming your selection.

[ 102 DRAFT ]Note: If the GPRS connection is set to Always online, info messages may not be received. In that case, set the GPRS connection to When needed, see “GPRS” on page137 for more information.Welcome noteYou can write a welcome note which shows up briefly on your display whenever you power up your phone.Note: Predictive text input is unavailable for entering Welcome note text.1At the Start screen, press Menu 4-3-4 (Settings - Phone settings - Welcome note). After a brief pause, the message edit screen appears in the display awaiting text input.2Enter a note (up to 44 characters). •Press the star key to display and select from available special characters. For more information on special characters, “Enter punctuation and special characters” on page40.3When you’re finished, press Options, scroll to Save, and press Select.Scroll to Delete and press Select if you want to delete the previous text and begin writing another note.System selectionYou may be able to manually search for another network which has a roaming agreement with your home wireless provider.1At the Start screen, press Menu 4-3-5 (Settings - Phone settings - System selection). After a brief pause, Automatic and Manual appear in the display.

[ 103 DRAFT ]Menu functions2Scroll to Automatic or Manual and press Select.Note: If No system access appears in the display, you’ll need to switch to Automatic mode, or insert another SIM card into the phone.Confirm SIM service actionsThis option allows you to request notification when your service provider makes changes to SIM-related services (such as activating GPRS service).1Press Menu 4-3-6 (Settings - Phone settings - Confirm SIM service actions). After a brief pause, Yes and No appear in the display.2Scroll to the selection of your choice and press Select. A message appears in the display confirming your selection.Help textYour phone displays brief descriptions for most menu items. When you arrive at a feature or menu, pause for about 10 seconds. Use the scroll keys to page through the full help text, if necessary.ACTIVATE/DEACTIVATE HELP TEXTThe default setting for Help text is On. However, you can turn help text on or off by doing the following from the Start screen.1Press Menu 4-3-7 (Settings - Phone settings - Help text activation). After a brief pause, On and Off appear in the display.2Scroll to your choice and press Select. A message appears in the display confirming your selection.Option FunctionAutomatic Your phone defaults to those settings which have been preset by your wireless providerManual Your phone searches for a network which has a roaming agreement with your wireless provider

[ 104 DRAFT ]START-UP TONEYou can set your phone to play (or not to play) a start-up tone when the phone is switched on.1At the Start screen, press Menu 4-3-8 (Settings - Phone settings - Start-up tone). After a brief pause, On and Off appear in the display.2Scroll to your choice and press Select. A message appears in the display confirming your selection. • DISPLAY SETTINGS WallpaperYou can set your phone to display a background picture (wallpaper) on the Start screen. Some pictures are pre-saved in the Gallery menu. You can also receive pictures via multimedia message, download them from WAP pages or transfer them with PC Suite from your PC and then save them in the Gallery. Your phone supports JPEG, GIF, BMP, PNG, and WBMP formats.SELECT WALLPAPER1Press Menu 4-4-1 (Settings - Display settings - Wallpaper). After a brief pause, On, Off, and Change image appear in the display.2Scroll to Change image and press Select to browse the gallery for another image. 3Use the up and down scroll keys to browse the image gallery. When you arrive at the image of your choice, press Options, scroll to Set as wallpaper, and press Select.4If Replace current wallpaper? appears in the display, press OK. A message appears in the display confirming your selection.ACTIVATE/DEACTIVATE WALLPAPER1Press Menu 4-4-1 (Settings - Display settings - Wallpaper). After a brief pause, On, Off, and Change image appear in the display.2Scroll to On or Off and press Select.

[ 105 DRAFT ]Menu functionsColor schemesYou can change the color of some display components in your phone, such as indicators and signal bars.1At the Start screen, press Menu 4-4-2 (Settings - Display settings - Color Schemes). After a brief pause, a list of color schemes appear in the display.2Scroll to the color scheme of your choice and press Select. A message appears in the display confirming your selection.Screen saverThe screen saver is activated when no function of the phone is used after a preset period of time. Press any key to deactivate the screen saver. The screen saver is also deactivated when the phone is out of the network coverage area.1At the Start screen, press Menu 4-4-3 (Settings - Display settings - Screen saver timeout). After a brief pause, 2 minutes, 5 minutes, and Other appear in the display.2Scroll to 2 minutes or 5 minutes and press Select. 3If you want to set a custom time (up to 60 minutes), scroll to Other and press Select. Enter the custom time and press OK. A message appears in the display confirming your selection.SCREEN SAVER TIMEOUTYou can set your phone to display a screen saver after a preset time or after a custom time (up to 60 minutes) of your choosing.Display brightnessYou can change the brightness of your phone’s display.1Press Menu 4-4-5 (Settings - Display settings - Display brightness). After a brief pause, a bar chart appears in the display indicating the current brightness level.2Use the left and right scroll keys or the side volume keys to adjust the contrast level to your preference.

[ 108 DRAFT ]Alarm clock (Menu 5)The alarm clock is based on your phone’s internal clock. It sounds an alert any time you specify and even works if the phone is off. • SET AN ALARMIF AN ALARM HAS NOT BEEN SET1At the Start screen, press Menu 5 (Alarm clock). After a brief pause, you’re prompted to enter a time for the alarm.2Enter the time for the alarm in hh:mm format and press OK. 3Scroll to am or pm and press Select. Alarm on appears briefly in the display and appears on the Start screen.IF AN ALARM HAS PREVIOUSLY BEEN SET1At the Start screen, press Menu 5 (Alarm clock). After a brief pause, On and Off appear in the display.2Scroll to On and press Select. You’re prompted to set the alarm time.3Enter the time for the alarm in hh:mm format and press OK. 4Scroll to am or pm and press Select. Alarm on appears briefly in the display and appears on the Start screen.When the alarm soundsYour phone beeps, vibrates, and the display lights up. Stop and Snooze appear in the bottom of the display.WITH THE PHONE ONPress Stop to shut the alarm off.OR Press Snooze. The alarm stops for 10 minutes and Snoozing appears in the display.

[ 109 DRAFT ]Menu functionsNote: If you don’t press a key, the alarms stops (snoozes) for 5 minutes, and then sounds again.WITH THE PHONE OFF1The alarm sounds. If you press Stop the following appears in the display:Switch the phone on?Note: The phone will only power up if you select Yes when Switch the phone on? appears in the display.2Press Yes to power up the phone. Press No to keep it switched off.Warning: Do not switch the phone on when wireless phone use is prohibited or when it may cause interference or danger. • TURN OFF AN ALARM THAT HAS BEEN SET1At the Start screen, press Menu 5 (Alarm clock). After a brief pause, On and Off appear in the display.2Scroll to Off and press Select. Alarm off appears briefly in the display.

[ 110 DRAFT ]Radio (Menu 6) Note: Your phone must be switched on to use this function. Do not switch the phone on when wireless phone use is prohibited or when it may cause interference or danger.To listen to the FM radio on your phone connect the HDS-3 stereo headset or HDB-4 boom headset to the connector on the bottom of the phone. The leads of the headset function as the antenna, so let it hang freely.Note: The quality of the radio broadcast depends on the radio station’s coverage in that particular area. • TURN THE RADIO ON AND OFF•At the Start screen, press Menu 6 (Radio). •To quickly turn off the radio, press and hold e. • USE THE RADIONote: When you place or receive a call, the radio automatically mutes. Once the call is ended, the radio automatically switches back on.•With the radio on, press Options to choose from the options listed in the following table. Press the up or down scroll key to scroll to an option. Press Select to activate the option or enter its submenu.Option FunctionTurn off Turn off the radioSave channel Save the current station to one of 20 locations

[ 111 DRAFT ]Menu functionsTip: To quickly set the radio frequency, press the star key with the radio on.Tip: To manually tune the radio, press the pound key with the radio on.Note: When an application using a GPRS connection is sending or receiving data, it may interfere with the radio.Automatic tuning Briefly press either scroll key to start the channel search up or down. Press OK when a channel is found.Manual tuning Press the up or down scroll key to search in increments of 0.1 MhzSet frequency Manually enter the frequency of a known radio stationDelete channel Delete a saved channelLoudspeaker Listen to the radio through the speakerphoneMono output/Stereo output Listen to the radio in monaural mode. If already in manual mode, Stereo output appears in the displayOption Function

[ 112 DRAFT ] • SAVE A RADIO CHANNELYou can save a preset station to any one of 20 locations in memory, and then tune to that station by simply pressing the up or down scroll key with the radio on.1With the radio on, press and hold the up or down scroll key to start the channel search. Searching stops when a channel is found. 2To save the channel, press Options, scroll to Save channel, and press Select.3Enter a name for the channel and press OK. 4Next, scroll to an (empty) location to save the channel and press Select.Tip: To quickly save an FM station to a memory location from 1 to 9, press and hold the corresponding number key while the radio is playing. Then, enter the name of the channel and press OK.

[ 113 DRAFT ]Menu functionsGallery (Menu 7)You can save pictures and ringing tones to folders in the gallery, or create folders of your own and save them there. You can download images and tones via MMS, WAP, or Nokia PC Suite.Note: This feature uses shared memory. Please see “Shared memory” on page15 for more information.Note: Your phone must be switched on to use this function. Do not switch the phone on when wireless phone use is prohibited or when it may cause interference or danger. • OPEN THE GALLERY•At the Start screen, press Menu 7 (Gallery). After a brief pause, the submenus in the following table appear in the display.Option FunctionView folders Explore the folders in the gallery menu. See “View folders” in the following section for more infoDelete folder Delete a folder you’ve createdRename folder Rename a folder you’ve createdAdd folder Add a folder of your ownaGallery downloadsa. The phone tries to connect to the Internet using your WAP browser and the currently active set of gallery downloads. If the connection fails, you may need to activate another set or change the current settings. See “Set up for brows-ing” on page141 for more information.Use the image and tone downloads in your phone; see the following for more information

[ 115 DRAFT ]Menu functionsOrganizer (Menu 8)Note: Your phone must be switched on to use this function. Do not switch the phone on when wireless phone use is prohibited or when it may cause interference or danger.Your phone has many useful features for organizing your everyday life, including a calendar and a to-do list. • CALENDARThe calendar keeps track of reminders, calls you need to make, meetings, and birthdays. It can even sound an alarm for any of these events.Note: This feature uses shared memory. Please see “Shared memory” on page15 for more information.OPEN THE CALENDARAt the Start screen, press Menu 8-1 (Organizer - Calendar). After a brief pause, the Monthly view appears in the display with the current date highlighted by a black box.Tip: To quickly open the Calendar, press the right scroll key at the Start screen. Monthly view

[ 116 DRAFT ]USE FOUR-WAY SCROLLINGYou can move the cursor in some calendar views using the left, up, down, and right scroll keys much the same as a joystick. To move the cursor: • MONTHLY VIEWMonthly view provides an overview of the selected month and weeks. It also allows you to jump to a specific date. Any days or dates that appear in bold font contain calendar notes such as a meeting or reminder. • GO TO A DATE1Press Menu 8-1 (Organizer - Calendar). After a brief pause, the monthly view appears in the display.2Press Options, scroll to Go to date, and press Select.3Enter the date (for example 12/15/2002) and press OK. The monthly view appears in the display with the “jump date” highlighted.Make a note for a specific dateYou can choose from five types of notes; Meeting, Call, Birthday, Memo, and Reminder. Your phone asks for further information depending on which note you choose. You also have the option to set an alarm for any note that you select.Note: This feature uses shared memory. Please see “Shared memory” on page15 for more information.1Go to the date for which you want to set a reminder. See “Go to a date” in the previous section if you need more information. 2From the monthly view (with the go to date highlighted), Left, press the left scroll keyUp, press the up scroll keyDown, press the down scroll keyRight, press the right scroll key

[ 117 DRAFT ]Menu functionspress Options.3Scroll to Make a note, and press Select.4Scroll to one of the following note types and press Select5Enter your note, press Options, scroll to Save, and then press Select.•For a Meeting note, you’re prompted to enter a subject, location, and then a start/end time. You’re then given the option to set an alarm.•For a Call note, you’re prompted to enter a phone number, a name, and the time. You’re then given the option to set an alarm.•For a Birthday note, you’re prompted to enter the person’s name, and year of birth. You’re then given the option to set an alarm.•For a Memo note, you’re prompted to enter a subject and then an end date. You’re then given the option to set an alarm.•For a Reminder note, you’re prompted to enter the subject you wish to be reminded about, you’re then given the option to set an alarm.View calendar notes - the Day viewAfter you’ve created some calendar notes, you can view them as follows:1At the Start screen, press Menu 8-1 (Organizer - Calendar).After a brief pause, the monthly view appears in the display with the current date highlighted. Any dates that contain calendar notes will be in bold font.2Use four-way scrolling to go to the date containing the note.3Press Options, scroll to View day, and press Select. Any notes you have for the day will appear in a list format.4To view the body of a highlighted note, press Options, scroll to View and press Select. Meeting Call Birthday Memo Reminder

[ 118 DRAFT ]Options while viewing a list of notes1Press Options while viewing a day’s notes to display those options listed in the following table.2Scroll to an option. Press Select to activate the option or to enter its submenu.*Indicates an option that is available only while viewing the body of a note (not the header). • SEND A CALENDAR NOTE TO ANOTHER DEVICESend a note via Infrared or text messageNote: If sending via IR (infrared), ensure the other device is set to receive data via IR. For more information on enabling the receiving device’s IR, refer to the user guide for the receiving device.Calendar note optionsView View the full noteMake a note Make another note for the selected date*Delete Delete the note*Edit Edit the note*Move Move the note to another date on your calendar*Repeat Enable the note to recur on a regular basis (daily, weekly, bi-weekly, monthly, and yearly)Go to date Jump to another date on your calendar*Send note Send the note to another device via Infrared or as a text message or in vCal format*Copy Copy the note. You can then “paste” the note to another date*Settings Set the date and time, date and time format, the day each week starts, and whether you want your notes to auto-delete after a specified timeGo to to-do list Takes you to the to-do list for today’s date

[ 119 DRAFT ]Menu functions1At the Start screen, press Menu 8-1 (Organizer - Calendar). After a brief pause, the monthly view appears in the display. 2Jump, or scroll to the date containing the note you wish to send. Tip: Any days containing notes will be in bold font.3Press Options, scroll to View day, and press Select. 4Scroll to the note you wish to send and press Options.5Scroll to Send note and press Select.6Scroll to Via Infrared, As note, or As text message, and press Select.7If you selected Via Infrared, align the infrared ports of both devices and press Select. The note is sent.8If you selected As note, enter the number for the recipient (or press Find to retrieve a number from your Phone book), and press OK. The note is sent.If you selected As text message, the note appears in the display. 9Press Options, scroll to Send, and press Select.10 Enter the number for the recipient (or press Find to retrieve a number from your Phone book), and press OK. The note is sent.RECEIVE CALENDAR NOTES FROM ANOTHER DEVICEWhen you receive a Calendar note, your phone displays Calendar note received. You can then save the note in your Calendar and set an alarm for any date and time.VIEW RECEIVED CALENDAR NOTES1When your phone displays Calendar note received, press Show.2The text of your note appears in the display. Use the scroll keys to view the entire message, if necessary.SAVE RECEIVED CALENDAR NOTES1After viewing the Calendar note, press Options.2Scroll to Save and press Select.

[ 120 DRAFT ]DISCARD VIEWED CALENDAR NOTES1After viewing the Calendar note, press Options.2Scroll to Discard and press Select. • MAKE A TO-DO LISTNote: This feature uses shared memory. Please see “Shared memory” on page15 for more information.You can keep track of your tasks with the to-do list feature. You may be able to save up to 30 notes, depending on their length.Note: To-do notes are not related to specific dates.Add a to-do note1At the Start screen, press Menu 8-2 (Organizer - To-do list).2After a brief pause, press Options. If this is your first time to use the to-do list, Add is highlighted. You can also go to the Calendar.3Press Select, enter your to-do note and press Options.4Scroll to Save and press Select.5Scroll to High, Medium, or Low priority and press Select. The to-do note is saved.

[ 121 DRAFT ]Menu functionsOptions while viewing notesPress Options while viewing the header or body of a particular note and the following options appear in the display.Header view Option Body view OptionView View the body of a note Edit Edit the content of a noteAdd Add another note Set deadline Set a deadline for the noteDelete Delete the note Mark note as done Mark a note or task as complete; no more reminders will followSort by deadline Sort the notes according to their deadline Delete Delete the noteSend Send the note as a text message Edit priority Change the priority to high, medium, or lowGo to calendar Leave the to-do list and go to the calendar Send Send the note as a text message Save to calendar Save the to-do note to a date on your calendar Go to calendar Leave the to-do list and go to the calendarN/A N/A Save to calendar Save the to-do note to a date on your calendar

[ 122 DRAFT ]Games (Menu 9)Note: Your phone must be switched on to use this function. Donot switch the phone on when wireless phone use is prohibited or when it may cause interference or danger. 1At the Start screen, press Menu 9 (Games). After a brief pause, the list of game submenus in the following table appear in the display.2Scroll to a submenu. Press Select to enter the submenu and choose other settings.Note: Some menus listed in the following table are network dependent. Contact your wireless provider for more information.Submenu FunctionSelect game Select a game or enter a game’s option list. See “Game options” on page123 for more info on game optionsGame downloads Connect to game downloads on the Internet using your WAP browserMemory Check the available memory for games and game related applicationsSettings Turn game sounds, lights, and shakes on or off

[ 123 DRAFT ]Menu functions • LAUNCH A GAME1Press Menu 9-1 (Games - Select game). After a brief pause, a list of games appears in the display.2Scroll to a game and press the talk key. If the selection is a single game it will launch. Otherwise, a list of games within the selected game set appears in the display. To launch a single game, scroll to the desired game and press the talk key.Tip: If a game uses the whole display area, selection keys such as Options or Back will not appear in the display. Press the left or right scroll key to show the options keys Select or Back (returns to the game).Game options•While viewing the games list, press Options to display those listed in the following table. Scroll to an option and press Select to activate the option or enter its submenu.Option FunctionOpen Play the gameDelete Delete the gameWeb access Options for restricting network accessCheck version Display the version of the highlighted gameDetails Display details of the game

[ 124 DRAFT ]Applications (Menu 10) The phone must be switched on to use this function. Do not switch on the phone when the use of a wireless phone is prohibited or when it may cause interference or danger.With the Applications menu you can manage the JavaTM applications installed on your phone, or those that may be offered by your wireless provider.Note: This feature uses shared memory. Please see “Shared memory” on page15 for more information. • LAUNCH AN APPLICATION1At the Start screen, press Menu 10-1 (Applications - Select application). After a brief pause, one or more applications appear in the display.2Scroll to an application or an application set and press Options, or press the talk key.3If the selection is a single application it will be launched. Otherwise, a list of applications in the selected application set is displayed. •To launch a single application within the set, scroll to the desired application and press Options, then press Select or the talk key.

[ 125 DRAFT ]Menu functions • APPLICATION OPTIONS • DOWNLOAD APPLICATIONSYou can download new JavaTM applications in different ways.Use Application downloads1At the Start screen, press Menu 10-2 (Applications - App. downloads). After a brief pause, the list of available WAP bookmarks appears in the display.Note: This feature is network dependent. Contact your wireless provider for more information.•Scroll to More bookmarks (if necessary) and press Select to access the list of WAP bookmarks in your Services menu.2Scroll to the appropriate bookmark that contains the application you wish to download, and press Select to connect to the WAP page. See Option FunctionOpen Opens the selected application or application setDelete Delete the application or application set from your phone.Web access Provides options for restricting network access Ask first (ask for net access)Allowed (allow net access)Not allowed (to not allow net access)Check version Check if a new version of the application is available for downloadWeb page Provides further information or data for the application from an Internet page; this feature is network dependent and only appears if an Internet address has been provided with the applicationDetails Shows additional information about the application

[ 126 DRAFT ]“Navigate the wireless Internet” on page142 for information on browsing WAP pages.Use the Game downloads menu•At the Start screen, press Menu 9-2 (Games - Game downloads). After a brief pause, your phone connects to the WAP pages using the currently active set of WAP settings.Note: If the connection fails, you may enter the Services menu and activate another set of service settings. See “Use browser options” on page142 for more info on browser settings.Use PC SuiteUse the JavaTM Application installer from PC Suite to download the applications in your phone. Note: Nokia does not warrant for applications from non-Nokia sites. If you choose to download Java applications from non-Nokia sites, take precautions for security or content.Note: When you download a game or an application, it may be saved in the Games menu instead of the Applications menu.Memory status for applicationsYou can view the size of memory available for game and application installations.•At the Start screen, press Menu 10-3 (Applications - Memory). After a brief pause, the amount of free memory appears in the display.

[ 127 DRAFT ]Menu functionsExtras (Menu 11)Note: Your phone must be switched on to use this function. Do not switch the phone on when wireless phone use is prohibited or when it may cause interference or danger. • USE THE CALCULATORThe calculator in your phone adds, subtracts, multiplies, divides, counts the square and the square root and converts currency values.Note: Your phone must be switched on to use this function. Do not switch the phone on when wireless phone use is prohibited or when it may cause interference or danger.Note: Calculator has a limited accuracy and rounding errors may occur, especially in long divisions.1Press Menu 11-1 (Extras - Calculator). After a brief pause, the calculator screen appears in the display.2Enter the first number in the calculation Press the pound key for a decimal point if necessary.3Press the star (*) key to cycle through the add (+), subtract (-), multiply (*), and divide (/) characters. Pause briefly to select the currently displayed character.Note: To perform a square or square root calculation, press Options, scroll to Square or Square root and press Select. 4Enter the second number in your calculation.5Press Options. Equals is highlighted. Press Select. The sum of your calculation appears in the display.

[ 128 DRAFT ] • USE THE CURRENCY CONVERTERYou can convert foreign currency to domestic, or vice versa directly from the Start screen.1At the Start screen, enter a currency amount to convert.2Press Options, scroll to one of the following and press Select: If you haven’t done so already, you’re prompted to enter the exchange rate.3Enter the exchange rate and press OK. Press the pound key to insert a decimal. The converted amount appears in the display.Edit the exchange rate1At the Start screen, press Menu 11-1 (Extras > Calculator). After a brief pause, the calculator screen appears in the display.2Press Options (Exchange rate is highlighted), then press Select and scroll to highlight or display one of the following options:3Press Select to edit your choice. 4Enter the exchange rate and press OK. The exchange rate is saved.To home Converts foreign currency to domestic currencyTo foreign Converts domestic currency to foreign currencyForeign units in home units Enter the number of home units it takes to make one unit of foreign currencyHome units in foreign units Enter the number of foreign units it takes to make one unit of your home currency

[ 129 DRAFT ]Menu functions • USE THE COUNTDOWN TIMER The countdown timer is like an egg-timer or the timer on your microwave oven. You can enter a specified time (up to 99 hours and 59 minutes), and when the time runs out, your phone sounds an alarm.Note: Your phone must be switched on to use this function. Do not switch the phone on when wireless phone use is prohibited or when it may cause interference or danger.Note: The countdown timer only works when the phone is on. Once you turn off your phone, the timer is no longer active.Set the countdown timer1At the Start screen, press Menu 11-2 (Extras - Countdown timer).2After a brief pause, you’re prompted to enter the time. Enter 2 digits for hours, 2 digits for minutes, then press OK.3Enter a note for the timer, then press OK. The timer begins running.CHANGE THE TIMEAfter you’ve set the timer, you can change the time. 1At the Start screen, press Menu 11-2 (Extras - Countdown timer).After a brief pause, Change time and Stop timer appear in the display.2Scroll to Change time and press Select.3Enter the new time and press OK.4Leave the note as it was, or enter a new note and press OK. The timer begins running.WHEN THE ALARM SOUNDSWhen the time runs out, your phone sounds an alarm, displays the timer note, and flashes its lights. •Press any key during the alarm to stop the timer. •After 30 seconds the timer alert expires automatically.

$[ 130 DRAFT ]STOP THE TIMER BEFORE THE ALARM SOUNDS1At the Start screen, press Menu 11-2 (Extras - Countdown timer).After a brief pause, Change time and Stop timer appear in the display.2Scroll to Stop timer and press Select. Timer stopped appears in the display. • USE THE STOPWATCHYour phone has a stopwatch that can be used to track time at sporting events or other occasions. The stopwatch displays time in hours, minutes, seconds and fractions of a second. 00:00:00:0Note: Your phone must be switched on to use this function. Do not switch the phone on when wireless phone use is prohibited or when it may cause interference or danger.Note about stopwatch operationUsing the stopwatch consumes the battery and the phone's operating time will be reduced. Be careful not to let it run in the background when performing other operations with your phone. If you press the end key and return to the Start screen, the clock continues to run in the background and the icon appears in the upper left corner of the screen.To return to the Stopwatch screen, take the following steps:1Press Menu 11-3 (Extras - Stopwatch). After a brief pause, a list of options appear in the display.2Scroll to Continue and press Select.•To stop the clock, press Stop.Measure time1Press Menu 11-3 (Extras - Stopwatch). After a brief pause, a list of options appear in the display.2Scroll to Split timing and press Select.$

Microsoft NPM-6X PCS Band GSM Cellular Transceiver User Manual Manual

Microsoft Mobile Oy PCS Band GSM Cellular Transceiver Manual

Manual

Navigation menu

Namespaces

Views

Navigation