Microsoft RH-19 GSM Mobile Phone (PCS 1900) User Manual Manual

Microsoft Mobile Oy GSM Mobile Phone (PCS 1900) Manual

Contents

Manual

User’s Guide 9356281Issue 1
The wireless phone described in this guide is approved for use in GSM 900, 1800 and 1900 networks.LEGAL INFORMATIONPart No. 9356281 Issue No. 1Copyright ©2003 Nokia. All rights reserved.Nokia is a registered trademark of Nokia Corporation.Nokia, Nokia Connecting People, Xpress-on, Pop-Port, the Original Accessories logos, Space Impact, Snake II, and Bumper are trademarks of Nokia Corporation and/or its affiliates.Printed in Canada 06/2003US Patent No 5818437 and other pending patents.T9 text input software Copyright ©1999-2003. Tegic Communications, Inc. All rights reserved. Includes RSA BSAFE cryptographic or security protocol software from RSA Security. Java is a trademark of Sun Microsystems, Inc.The information contained in this user guide was written for the Nokia 3100 phone.Nokia operates a policy of continuous development. Nokia reserves the right to make changes and improvements to any of the products described in this document without prior notice.UNDER NO CIRCUMSTANCES SHALL NOKIA BE RESPONSIBLE FOR ANY LOSS OF DATA OR INCOME OR ANY SPECIAL, INCIDENTAL, AND CONSEQUENTIAL OR INDIRECT DAMAGES HOWSOEVER CAUSED.THE CONTENTS OF THIS DOCUMENT ARE PROVIDED “AS IS.” EXCEPT AS REQUIRED BY APPLICABLE LAW, NO WARRANTIES OF ANY KIND, EITHER EXPRESS OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE, ARE MADE IN RELATION TO THE ACCURACY AND RELIABILITY OR CONTENTS OF THIS DOCUMENT. NOKIA RESERVES THE RIGHT TO REVISE THIS DOCUMENT OR WITHDRAW IT AT ANY TIME WITHOUT PRIOR NOTICE.EXPORT CONTROLSThis product contains commodities, technology or software exported from the United States in accordance with the Export Administration regulations. Diversion contrary to U.S. or Canadian law is prohibited.
FCC/INDUSTRY CANADA NOTICEYour phone may cause TV or radio interference (for example, when using a telephone in close proximity to receiving equipment). The FCC or Industry Canada can require you to stop using your telephone if such interference cannot be eliminated. If you require assistance, contact your local service facility. This device complies with part 15 of the FCC rules. Operation is subject to the condition that this device does not cause harmful interference.
Contents3ContentsFOR YOUR SAFETY...................  6General information ................  8Access codes ...........................................  8Extended user’s guide ..........................  8Overview of the functions in the phone.............................  9Shared memory ......................................  91. Your phone .........................  10Keys and connectors........................... 10Standby mode....................................... 10Power saving ..................................... 11Essential indicators.......................... 112. Getting started...................  12Installing the SIM card and the battery............................................. 12Charging the battery .......................... 13Switching the phone on and off ..... 13Normal operating position................ 14Keypad lock (Keyguard) ..................... 14Changing the front and back cover.............................................. 14Charging the glow-in-the-dark cover........................................................ 153. Basic functions................... 16Making a call ........................................ 16Speed dialling a phone number ... 16Answering or rejecting an incoming call ........................................ 17Call waiting........................................ 17Options during a call .......................... 17Loudspeaker....................................... 17Writing text........................................... 18Setting predictive text input on or off.............................................. 18Using predictive text input ........... 18Writing compound words .......... 19Using traditional text input .......... 194. Using the menu .................. 20List of menu functions....................... 20Messages (Menu 1)............................. 22Text messages ................................... 22Writing and sending messages. 22Options for sending a message  23Writing and sending an SMS e-mail..................................... 23Reading and replying to a message or an SMS e-mail .... 23Inbox and outbox folders ........... 24Templates........................................ 24Archive folder and my folders... 24Distribution lists ........................... 25Message counters......................... 25Multimedia messages ..................... 25Writing and sending a multimedia message.................... 26Reading and replying to a multimedia message.................... 27Multimedia messages Inbox, Outbox, Saved and Sent items folders .............................................. 27Multimedia messages memory full ....................................... 27Deleting messages ........................... 27Voice messages................................. 28Info messages ................................... 28Message settings.............................. 28Settings for text and e-mail messages......................................... 28Overwrite settings for text and e-mail messages................... 28Settings for the multimedia messages......................................... 29
Contents4Font size setting ...........................  29Service commands ..........................  29Call register (Menu 2)........................  30Recent call lists................................  30Call counters and call timers .......  30Contacts (Menu 3)..............................  30Searching for a name in contacts..............................................  31Saving multiple numbers, text items and an image per contact ........................................  31Profiles (Menu 4).................................  32Settings (Menu 5)...............................  33Personal shortcuts...........................  33Screen saver......................................  33Time and date settings...................  33Call settings ......................................  34Call divert.......................................  34Anykey answer..............................  34Automatic redial...........................  34Speed dialling................................  34Call waiting....................................  35Summary after call......................  35Send my caller identity ..............  35Line for outgoing calls................  35Phone settings..................................  35Language ........................................  35Automatic keyguard....................  35Cell info display ............................  36Welcome note...............................  36Network selection........................  36Confirm SIM service actions.....  36Help text activation ....................  36Start-up tone ................................  36Display settings................................  36Wallpaper.......................................  36Colour schemes.............................  37Operator logo ................................  37Display brightness........................  37Tone settings.....................................  37Enhancement settings....................  37Security settings..............................  38Restore factory settings ................  38Alarm clock (Menu 6) ........................  39Gallery (Menu 7) .................................  39Calendar (Menu 8)..............................  40Making a calendar note.................  40When the phone alarms for a note...........................................  40Games (Menu 9)..................................  40Launching a game...........................  41Game downloads .............................  41Game settings...................................  41Applications (Menu 10).....................  41Launching an application..............  42Other options available for an application ...............................  42Downloading an application ........  42Extras (Menu 11).................................  43Calculator ..........................................  43Making calculations ....................  43Making a currency conversion .  44Countdown timer ............................  44Stopwatch .........................................  44Services (Menu 12).............................  45Setting up the phone for a service .............................................  45Saving the service settings received as an OTA message.....  45Keying in the service settings manually .........................................  45Making a connection to a service 46Browsing the pages of a service .  46Using the phone keys while browsing .........................................  46Direct calling .................................  47Disconnect from a service.............  47Appearance settings of the multi-mode browser.......................  47Selecting Cookie settings..............  48Bookmarks .........................................  48Receiving a bookmark.................  48Downloading.....................................  48Service inbox ....................................  49
Contents5Clearing the cache memory .......... 49Authority certificates...................... 49Viewing the list of authority certificates...................................... 50Security indicator ......................... 50Go to (Menu 13) .................................. 50SIM services (Menu 14) ..................... 505. PC Connectivity.................. 51PC Suite.................................................. 516. Battery statements.............  52Charging and Discharging................. 527. Technical Information......... 538. Patents .................................54CARE AND MAINTENANCE.... 55IMPORTANT SAFETY INFORMATION........................ 56APPENDIX ................................62A message from the CTIA................... 62A message from the U.S. Food and Drug Administration ...................................... 65
FOR YOUR SAFETY6FOR YOUR SAFETYRead these simple guidelines. Breaking the rules may be dangerous or illegal. Further detailed information is given in this manual.Do not switch on the phone when wireless phone use is prohibited or when it may cause interference or danger.ROAD SAFETY COMES FIRSTDo not use a hand-held phone while driving.INTERFERENCEAll wireless phones may get interference, which could affect performance.SWITCH OFF IN HOSPITALSFollow any regulations or rules. Switch the phone off near medical equipment.SWITCH OFF IN AIRCRAFTWireless devices can cause interference in aircraft.SWITCH OFF WHEN REFUELLINGDo not use the phone at a refuelling point. Do not use near fuel or chemicals.SWITCH OFF NEAR BLASTINGDo not use the phone where blasting is in progress. Observe restrictions, and follow any regulations or rules.USE SENSIBLYUse only in the normal position. Do not touch the antenna unnecessarily.QUALIFIED SERVICEOnly qualified personnel may install or repair phone equipment.ACCESSORIES AND BATTERIESUse only approved accessories and batteries. Do not connect incompatible products.WATER-RESISTANCEYour phone is not water-resistant. Keep it dry.BACKUP COPIESRemember to make backup copies of all important data.CONNECTING TO OTHER DEVICESWhen connecting to any other device, read its user’s guide for detailed safety instructions. Do not connect incompatible products.CALLINGEnsure the phone is switched on and in service. Enter the phone number, including the area code, then press  . To end a call, press  . To answer a call, press  .EMERGENCY CALLSEnsure the phone is switched on and in service. Press   as many times as needed (e.g. to exit a call, to exit a menu, etc.) to clear the display. Enter the emergency number, then press  . Give your location. Do not end the call until told to do so.
FOR YOUR SAFETY7■Network ServicesThe wireless phone described in this guide is approved for use on the EGSM 900, GSM 1800 and GSM 1900 network.Triband is a network dependent feature. Check with your local service provider if you can subscribe to and use this feature.A number of features included in this guide are called Network Services. These are special services that you arrange through your wireless service provider. Before you can take advantage of any of these Network Services, you must subscribe to them through your service provider and obtain instructions for their use from your service provider.Note: Some networks may not support all language-dependent characters and/or services.■About accessoriesCheck the model number of any charger before use with this device. This device is intended for use when supplied with power from ACP-7, ACP-12 and LCH-12.Warning: Use only batteries, chargers and accessories approved by the phone manufacturer for use with this particular phone model. The use of any other types may invalidate any approval or warranty applying to the phone, and may be dangerous.For availability of approved accessories, please check with your dealer.When you disconnect the power cord of any accessory, grasp and pull the plug, not the cord.
General information8General information■Access codes•Security code: This code, supplied with the phone, protects your phone against unauthorised use. The preset code is 12345. Refer to Security settings on page 38 to see how it works.•PIN code: This code, supplied with the SIM card, protects the card against unauthorised use. Set on the PIN code request in the Security settings menu (see Security settings on page 38), so that the code is requested each time the phone is switched on.If you key in an incorrect PIN code three times in succession, the SIM card is blocked. You must key in the PUK code to unblock the SIM card and set a new PIN code.•PIN2 code: This code is supplied with some SIM cards and is required to access certain services, such as charging unit counters. If you key in an incorrect PIN2 code three times in succession, PIN2 code blocked appears on the display, and you will be asked for the PUK2 code.Change the security code, PIN code and PIN2 code in Change of access codes in the Security settings menu (see Security settings on page 38). Keep the new codes secret and in a safe place separate from your phone.•PUK and PUK2 code: These codes may be supplied with the SIM card. If this is not the case, contact your local service provider.•Barring password (4 digits): The barring password is needed when using the Call barring service, see Security settings on page 38. You can obtain the password from your service provider.■Extended user’s guideYou may find an extended user’s guide for your phone model in the support area on the Nokia’s web site, www.nokia.com.
Overview of the functions in the phone9Overview of the functions in the phoneThe Nokia 3100 phone provides many functions which are practical for daily use, such as Calendar, Clock, Alarm clock, Profiles, and many more. Some functions are• MMS - Multimedia Messaging Service, see Multimedia messages on page 25.• Polyphonic MIDI ringing tones enable richer ringing tones with a wide variety of sounds.• GPRS - General Packet Radio Service is used for sending and receiving data over the mobile network. •MIDP JavaTM applications specially designed for mobile phones. See Applications (Menu 10) on page 41.• Nokia OTA settings service. Several services need proper settings in your phone. You may receive the settings directly as an OTA (Over The Air) message and you only need to save the settings. Contact your nearest authorised Nokia dealer for more information.■Shared memoryThe following features in this phone share memory: phone’s contacts directory, text and multimedia messages, images and ringing tones in gallery, calendar, bookmarks, and Java games and applications. Using any such features may reduce the memory available for any features sharing memory. This is especially true with heavy use of any of the features. For example, saving many images, Java applications, etc. may take all of the shared memory and your phone may display a message that the memory is full. In this case, delete some of the information or entries stored in the shared memory features before continuing.
Your phone101. Your phone■Keys and connectors1. Power key 2. Selection keys  and 3. 4-way scroll key with  ,  ,   and 4.  dials a phone number, and answers a call. In standby mode it shows the most recently called number.5.  ends an active call. Exits from any function.6.  -   enter numbers and characters. and   are used for various purposes in different functions.7. Charger connector8. Pop-PortTM connector for headset and data cable, for example■Standby modeWhen the phone is ready for use, and you have not keyed in any characters, the phone is in standby mode.1. Indicates the operator logo.2. Shows the signal strength of the cellular network at your current location. 3. Shows the battery charge level.4. The left selection key in standby mode is Menu.5. The right selection key in standby mode is Contacts or Go to (personal shortcut) or it has an operator specific name to access an operator’s homepage. To set the functions for your personal shortcut, see Personal shortcuts on page 33. 78
Your phone11Power savingFor power saving a digital clock view overwrites the display when no function of the phone has been used for a certain period of time.Essential indicatorsYou have received one or several text or picture messages. See Reading and replying to a message or a SMS e-mail on page 23.You have received one or several multimedia messages. See Reading and replying to a multimedia message on page 27.The phone’s keypad is locked. See Keypad lock (Keyguard) on page 14.The phone does not ring at an incoming call or text message when Incoming call alert is set to Off and Message alert tone is set to Off. See Tone settings on page 37.The alarm clock is set to On. See Alarm clock (Menu 6) on page 38.All your calls are diverted to another number, Divert all voice calls. If you have two phone lines, the divert indicator for the first line is   and for the second line  . See Call divert on page 34.The loudspeaker has been activated. See Loudspeaker on page 17.The phone has registered a missed call. See Call register (Menu 2) on page 30.
Getting started122. Getting started■Installing the SIM card and the batteryKeep all miniature SIM cards out of the reach of small children.• The SIM card and its contacts can easily be damaged by scratches or bending, so be careful when handling, inserting or removing the card.• Before installing the SIM card, always make sure that the phone is switched off and disconnected from any enhancement.1. Remove the back cover from the phone. With the back of the phone facing you, push the back cover release button (1) and slide the back cover off (2).Remove the battery by lifting it with the finger grip (3).2. Release the SIM card holder. Gently pull the locking clip of the card holder (4) and open it (5).3. Insert the SIM card into the SIM card holder (6). Make sure that the SIM card is properly inserted and that the golden contact area on the card is positioned as shown.
Getting started134. Close the SIM card holder (7) and press it until it snaps into position.5. Insert the battery (8).6. Slide the back cover into its place (9).■Charging the battery1. Connect the lead from the charger to the socket on the bottom of your phone.2. Connect the charger to an AC wall socket.The text Charging is displayed briefly if the phone is switched on. If the battery is completely empty, it may take a few minutes before the charging indicator appears on the display or any calls can be made.The charging time depends on the charger and the battery used. For example, charging a BL-5C battery with the ACP-7 charger takes up to 3 hours in standby mode. ■Switching the phone on and offWarning: Do not switch the phone on when wireless phone use is prohibited or when it may cause interference or danger.Press and hold the power key  .If the phone asks for a PIN code, key in the PIN code (displayed as ****).
Getting started14■Normal operating positionUse the phone only in its normal operating position.Your phone has a built-in antenna. As with any other radio transmitting device, do not touch the antenna unnecessarily when the phone is switched on. Contact with the antenna affects call quality and may cause the phone to operate at a higher power level than otherwise needed.Not touching the antenna area during a phone call optimises the antenna performance and the talktime of your phone.■Keypad lock (Keyguard)You can lock the keypad to prevent the keys being accidentally pressed.Press  (Menu or Unlock) and then   within 1.5 seconds to lock or unlock the keypad.An incoming call can be handled normally. When you end or reject the call, the keypad will automatically be locked again.For automatic keypad lock, see Automatic keyguard on page 35.Note: When the keypad is locked, calls may be possible to the emergency number programmed into your phone (e.g. 112, 911 or other official emergency number). Key in the emergency number and press . The number is displayed only after you have keyed in its last digit.■Changing the front and back coverBefore changing the covers, always switch off the power and disconnect the phone from the charger or any other device. Always store and use the phone with the covers attached.1. Remove the back cover of the phone. With the back of the phone facing you, push the back cover release button (1) and slide the back cover off (2).
Getting started152. To remove the front cover, gently prise the back part of the phone away from the front cover beginning at the bottom of the phone.3. Insert the key mat on the new front cover.4. To attach the front cover, first place the phone and the front cover properly together and then gently push on the top of the phone until the catch is locked properly.5. Place the back cover and the phone properly together (1) and slide the back cover into its place (2) until the back cover release button is properly locked. ■Charging the glow-in-the-dark coverThe front cover of your Nokia 3100 phone has a glow-in-the-dark element. To make the cover glow you need to charge it with a bright light source for at least 15 minutes.
Basic functions163. Basic functions■Making a call1. Key in the phone number, including the area code. If you key in a wrong character, press Clear to delete it.For international calls, press   twice for the international prefix (the + character replaces the international access code) and then key in the country code, area code without the leading 0, if necessary, and the phone number.2. Press   to call the number.3. Press   to end the call or to cancel the call attempt.Making a call using the contacts listIn standby mode, press   or   to find the name or key in the first character(s) of the name you are looking for. See also Searching for a name in contacts on page 31. Press   to call the number on the display.Last number rediallingIn standby mode, press   once to access the list of up to 20 numbers you last called or attempted to call. Scroll to the number or name you want, and press   to call the number.Speed dialling a phone numberAssign a phone number to one of the speed dialling keys, from   to , see menu option Speed dials in chapter Contacts (Menu 3) on page 30. Call the number in either of the following ways:• Press the speed dialling key you want and then press  .•If Speed dialling is set to on, press and hold a speed dialling key until the call is started. See Speed dialling on page 34.
Basic functions17■Answering or rejecting an incoming callPress   to answer the incoming call and press   to end the call.Press   to reject the incoming call.Press Silence, if available, to mute the ringing tone. Then either answer or reject the call.Tip: If the Divert if busy function is activated to divert the calls, for example to your voice mailbox, rejecting an incoming call will also divert the call. See Call divert on page 34.Call waitingDuring a call, press   to answer the waiting call. The first call is put on hold. Press   to end the active call.To activate the Call waiting function, see Call waiting on page 34.■Options during a callMany of the options that you can use during a call, are network services. Press Options during a call for some of the following options: End call, End all calls, Mute, Unmute, Contacts, Menu, Hold, Unhold, Swap, Transfer, New call, Conference, Private, Answer, Reject, Send DTMF, Loudspeaker, Handset, Lock keypad. For more information, see the extended user’s guide for your phone model in the support area on the Nokia’s web site, www.nokia.com.LoudspeakerYou can use your phone as a loudspeaker during a call. Warning: Do not hold the phone near to your ear when the loudspeaker is in use, because the volume may be extremely loud.To activate the loudspeaker, press Options and select Loudspeaker, or press selection key Loudsp., if available.To deactivate the loudspeaker during a call, press Options and select Handset, or press selection key Handset, if available.
Basic functions18■Writing textYou can key in text in two different ways, using the traditional text input, indicated with  , or using the predictive text input indicated with   at the top left of the display. The character case is indicated by  ,  , or   next to the text input indicator. You can change the character case by pressing  . The number mode is indicated by , and you can change between the letter and number mode by pressing and holding  ..Setting predictive text input on or offWhen writing text, press Options and select Dictionary.• To set the predictive text input on, select a language in the dictionary options list.• To change back to the traditional text input, select Dictionary off.Tip: To quickly set the predictive text input on or off when writing text, press   twice, or press and hold Options.Using predictive text inputPredictive text input is an easy way to write text. The predictive text input is based on a built-in dictionary to which you can also add new words.1. Key in the word you want by pressing each key once for one letter. The word changes after each keystroke. For example, to write ‘Nokia’ when the English dictionary is selected, press  ,  ,  , , . • To delete the character to the left of the cursor, press Clear. Press and hold Clear to delete the characters more quickly.• To switch between upper and lower cases, or between traditional and predictive text input, press   repeatedly and check the indicator at the top of the display. • To insert a number, press and hold the desired key. To switch between letters and numbers, press and hold  .• To get some punctuation marks, press   repeatedly.
Basic functions19• To get a list of special characters, press and hold  , select the character you want, or press   again to select a smiley from the offered list. Press Use to insert a special character or a smiley.2. If the displayed word is the one you want, press   and start writing the next word.• If you want to change the word, press   repeatedly to the word you want. • If the "?" is displayed after the word, the word is not in the dictionary. To add the word to the dictionary, press Spell, key in the word (traditional text input is used) and press OK.Writing compound wordsKey in the first half of the word, press  , and then key in the second half.Using traditional text inputPress the key marked with the letter that you want repeatedly until the letter appears.Use the following functions to edit the text:• To add a space, press  .• To add a punctuation mark or special character, press   repeatedly, or press  , select the desired character, and press Use.• To add a smiley, press   twice and select the desired smiley, and press Use.• To move the cursor to the left, right, down or up, press the scroll keys ,  ,   or  , respectively.• To delete a character to the left of the cursor, press Clear. Press and hold Clear to delete the characters more quickly.• To switch between upper and lower case, press  .• To add a number, press and hold the desired key. To switch between letters and numbers, press and hold  .• To key in a letter which is on the same key as the previous one, press  or   (or wait until the cursor appears), and key in the new letter.
Using the menu204. Using the menuThe phone offers you an extensive range of functions which are grouped in menus. To access the menu, press Menu. Scroll with   or   through the menus and select the menu by pressing Select. Select submenus and settings of your choise in the same way. Press Back to return to the previous menu level, and Exit to exit the menu.■List of menu functions1. Messages1. Text messages2. Multimedia msgs.3. Voice messages4. Info messages5. Message settings6. Service commands2. Call register1. Missed calls2. Received calls3. Dialled numbers4. Delete recent call lists5. Call duration6. Call costs7. GPRS data counter8. GPRS connection timer3. Contacts1. Search2. Add contact3. Delete4. Copy5. Settings6. Speed dials7. Info numbers18. Service numbers19. My numbers10.Caller groups4. Profiles1. General2. Silent3. Discreet4. Loud5. My Style 1 6. My Style 2 5. Settings1. Personal shortcuts2. Screen saver3. Time and date settings4. Call settings1. Only shown if supported by your SIM card.
Using the menu215. Phone settings6. Display settings7. Tone settings8. Enhancement settings19. Security settings10.Restore factory settings6. Alarm clock1. Alarm time2. Alarm tone7. Gallery1. View folders2. Add folder3. Delete folder4. Rename folder5. Gallery downloads8. Calendar9. Games1. Select game2. Game downloads3. Memory4. Settings10.Applications1. Select application2. App. downloads3. Memory11.Extras1. Calculator2. Countdown timer3. Stopwatch12.Services1. Home2. Bookmarks3. Download links4. Service inbox5. Settings6. Go to address7. Clear the cache13.Go to14.SIM services21. This menu is shown only if the phone is or has been connected to a compatible headset, handsfree unit or loopset available for the phone.2. Only shown if supported by your SIM card. The name and contents vary depending on the SIM card.
Using the menu22■Messages (Menu 1)You can read, write, send and save text, multimedia, and e-mail messages. Before sending a message, you need to save your message centre number, see Message settings on page 28.Text messagesUsing SMS (Short Message Service), your phone can send and receive multi-part messages, which consist of several ordinary text messages (network service). Invoicing may be based on the number of parts needed for your message. If you use special (Unicode) characters, more parts may be needed for the message than otherwise. Note that predictive text input may use Unicode characters.You can also send and receive text messages that contain pictures.Note: Picture message function can be used only if it is supported by your network operator or service provider. Only phones that offer picture message features can receive and display picture messages.Writing and sending messagesThe number of available characters / the current part number of a multi-part message are shown on the top right of the display, for example 120/2.1. Press Menu, and select Messages, Text messages and Create message.2. Key in a message. See Writing text on page 18. Following options may be available: Use template, Insert picture, Insert smiley, Insert number. Each picture message is made up of several text messages. Therefore, sending one picture message may cost more than sending one text message.3. To send the message, press Options and select Send.4. Key in the recipient’s phone number or search for a phone number in Contacts. Press OK to send the message.Note: When sending messages via the SMS network service, your phone may display the words Message sent. This is an indication that the message has been sent by your phone to the message centre number programmed into your phone. This is not an indication that the message has been received at the intended destination. For more details about SMS services, check with your service provider.
Using the menu23Options for sending a messageAfter you have written a message, press Options and select Sending options: With Send to many you can send the message to several recipients and Send to list sends the message to a predefined distribution list. Distribution lists see on page 25.With Sending profile you can use a predifined message profile to send the message. For the message profile, see Message settings on page 28.Writing and sending a SMS e-mailBefore you can send any e-mails via SMS you need to save the settings for e-mail sending, see Message settings on page 28. To check e-mail service availability and to subscribe to the service, contact your service provider. To save an e-mail address in the contacts list, see Saving multiple numbers, text items and an image per contact on page 31.1. Press Menu, and select Messages, Text messages and Create SMS e-mail.2. Key in the recipient’s e-mail address or search for it in the contacts list, key in the subject and the e-mail message.3. To send the e-mail, press Options and select Send e-mail.Note: When sending e-mails via the SMS network service, your phone may display the words Message sent. This is an indication that the e-mail has been sent by your phone to the e-mail server. This is not an indication that the e-mail has been received at the intended destination. For more details about e-mail services, check with your service provider.Reading and replying to a message or a SMS e-mailWhen you have received a message or an e-mail, the indicator   and the number of new messages followed by messages received is shown.Received messages are automatically stored in shared memory.The blinking   indicates that the message memory is full. Before you can receive new messages, delete old messages.1. Press Show to view the message, or press Exit to view it later.If more than one message is received, select the message you want to read. An unread text message is indicated by   in front of it.
Using the menu242. While reading or viewing the message, press Options.You can select, for example, an option to delete, forward or edit the message as a text message or an e-mail, move and rename the message you are reading. With Copy to calendar you can copy the text from the beginning of the message to your phone’s calendar as a reminder note. Select Message details to view the sender’s name and phone number, the message centre used, reception date and time. Select Use detail to extract numbers, e-mail addresses and website addresses from the current message. When reading a picture message, select Save picture to save the picture in the Templates folder.3. Select Reply to reply to a message. Select Empty screen, Original text or select a standard answer to be included in the reply. Confirm or edit e-mail address and subject. Write your reply message.Press Options, select Send, and press OK to send the message to the displayed number.Inbox and outbox foldersThe phone saves the incoming text messages in the Inbox folder and the sent messages in the Sent items folder of the Text messages submenu.The text messages you want to send later, can be saved in the Archive, My folders or Templates folder.TemplatesYour phone offers you text templates  , and picture templates  .To access the template list, press Menu, and select Messages, Text messages and Templates.Archive folder and my foldersYou can organise your messages in the Archive folder or in new added folders. While reading a message, press Options. Select Move, scroll to the folder where you want to move the message and press OK.To add or delete a folder, press Menu, and select Messages, Text messages and My folders. Press Options and select Add folder or Delete folder.
Using the menu25Distribution listsIf you often need to send messages to a fixed group of recipients, you can define distribution lists in the phone’s directory.To view the names in the selected distribution list, press Menu, and select Messages, Text messages and Distribution lists. Press Options and select View list. Press Options again to edit the content of a distribution list: Add contact, View details or Delete contact.To edit the distribution lists, press Menu, and select Messages, Text messages and Distribution lists. Press Options and select Add list, Rename list, Clear list or Delete list.If a message cannot be sent to certain recipients on the distribution list, select Undelivered. Press Options and select Resend to list (to resend the message to the recipients on the Undelivered list), View list, Delete list or View message.Message countersTo view your message counters, press Menu, and select Messages, Text messages, Message counter and Sent messages or Received messages. To clear the counters press Clear counters.Multimedia messagesNote: This function can be used only if it is supported by your network operator or service provider. Only phones that offer multimedia message features can receive and display multimedia messages.A multimedia message can contain text, picture and sound. The phone supports multimedia messages of size up to 45 kB. Note: If Allow multimedia reception is set to Yes or In home network, your operator or service provider may charge you for every message you receive.Multimedia messaging supports the following formats:• Picture: JPEG, GIF, PNG, and BMP.• Sound: Scalable Polyphonic MIDI (SP-MIDI) and monophonic ringing tones.You are not able to receive any multimedia messages if you have a call in progress, a game or another Java application running, or an active
Using the menu26service connection. Because delivery of multimedia messages can fail for a variety of reasons, do not rely solely upon them for essential communications.Writing and sending a multimedia messageTo set the settings needed, see Settings for the multimedia messages on page 29. For availability and subscription to the multimedia messaging service, contact your service provider.1. Press Menu, and select Messages, Multimedia msgs. and Create message.2. Key in a message.To insert a picture or a sound clip from Gallery, press Options, and select Insert image or Insert sound clip. The list of available folders in the Gallery is shown. Open a specific folder, scroll to the desired picture or sound, press Options and select Insert. The   or   indicator on the header of the message indicate that a picture or sound has been attached. To key in a name from the contacts list, press Options and select More options and Insert contact. To insert a number, press Options and select More options and Insert number. To view the message before sending it, press Options and select Preview.3. To send the message, press Options and select Send to number (or Send to e-mail or Send to many).4. Key in the recipient’s phone number (or e-mail address) or search for the phone number (or e-mail address) in the contacts list and confirm the number.During sending the animated indicator   is displayed and you can use the other functions of the phone. If the sending fails, the phone tries to resend it for a few times. After that the message remains in the Outbox folder and you can try to resend it.Copyright protection may prevent some images, ringing tones and other content from being copied, modified, transferred or forwarded.
Using the menu27Reading and replying to a multimedia messageDuring receiving a multimedia message, the animated indicator   is displayed. A received message is indicated with   and the text Multimedia message received is shown.1. Press Show to view the message, or press Exit to view it later.2. Scroll to view the message. Press Options and some of the following options may be available: Delete message, Reply or Reply to all, Forward to no., Forward to e-mail or Send to many, Edit, Message details, Play, Save sound clip or Save image.Multimedia messages Inbox, Outbox, Saved and Sent items foldersThe phone saves the received multimedia messages in the Inbox folder. Multimedia messages to be sent are moved to the Outbox folder. The multimedia messages you want to send later, can be saved in the Saved items folder. The sent multimedia messages are saved in the Sent items folder if the setting Save sent messages is set to Yes. See Settings for the multimedia messages on page 29.Multimedia messages memory fullReceived messages are automatically stored in the shared memory.When you have a multimedia message waiting and the memory for the messages is full, the indicator   is blinking and Multimedia memory full, view waiting msg. is shown. To view the waiting message, press Show. To save the message, press Options, select Save message and delete old messages by first selecting the folder and then an oId message to be deleted.To discard the waiting message, press Exit and Yes. To view the message, press No. Deleting messagesPress Menu, and select Messages, Text messages or Multimedia msgs. and Delete messages.• To delete all messages from one folder, select the folder. • To delete all messages from all text message folders, select All messages and confirm Delete all messages from all folders? .
Using the menu28If the folders contain unread messages, the phone will ask whether you want to delete them also.Voice messagesVoice mailbox is a network service and you may need to subscribe to it first. For details, contact your service provider.Press Menu, and select Messages and Voice messages. To call your voice mailbox ,select Listen to voice messages. To key in, search for or edit your voice mailbox number, select Voice mailbox number.If supported by the network, the indicator   will indicate new voice messages. Press Listen to call your voice mailbox number.Tip: In standby mode, pressing and holding   calls your voice mailbox.Info messagesWith this network service you can receive messages on various topics (such as traffic conditions). For details, contact your service provider.Message settingsThe message settings affect the sending, receiving or viewing of the messages.Settings for text and e-mail messagesPress Menu, and select Messages, Message settings, Text messages and Sending profile. If more than one message profile set is supported by your SIM card, select the set you want to change. Each set has the following settings: Message centre number (delivered from your service provider), Messages sent via, Message validity, Default recipient number (text messages) or E-mail server (e-mail), Delivery reports, Use GPRS, Reply via same centre (network service) and Rename sending profile.Overwrite settings for text and e-mail messagesPress Menu, and select Messages, Message settings, Text messages and Overwriting in inbox or Overwriting in sent items. Select Allowed to set the phone to replace the old text messages with new ones in the Inbox
Using the menu29or the Sent items folder, respectively when the text message memory is full.Settings for the multimedia messagesPress Menu, and select Messages, Message settings and Multimedia msgs.. Select•Save sent messages. Select Yes to save the sent multimedia messages in the Sent items folder. With settingNo, the sent messages are not saved.•Delivery reports to ask the network to send delivery reports about your messages (network service).•Allow multimedia reception. Choose No, Yes or In home network to use multimedia service. In home network does not allow to receive multimedia messages when outside your home network.•Incoming multimedia messages. Select Retrieve to allow the reception of multimedia messages, or select Reject.•Connection settings. Define service connection settings for retrieving multimedia messages. Activate the set where you want to save the connection settings and then edit the settings. You may be able receive the service settings as an OTA message from the service provider that offers the service that you want to use. For details, contact your service provider. Refer also Setting up the phone for a service on page 45.•Allow adverts. You can choose to allow or to reject advertisement.Font size settingTo select the font size for reading and writing messages, press Menu, and select Messages, Message settings, Other settings and Font size.Service commandsPress Menu, and select Messages and Service commands. Key in and send service requests (also known as USSD commands) such as activation commands for network services, to your service provider.
Using the menu30■Call register (Menu 2)The phone registers the phone numbers of missed, received and dialled calls, and the approximate length and cost of your calls.The phone registers if it is switched on and within the network’s service area, and the network supports these functions.Recent call listsWhen you press Options in the Missed calls, Received calls or Dialled numbers menu, you can view the time of the call, edit, view or call the registered phone number, add it to the memory, or delete it from the list. You can also send a text message (Send message).Call counters and call timersNote: The actual invoice for calls and services from your service provider may vary, depending upon network features, rounding-off for billing, taxes and so forth.Press Menu, and select Call register and then select•Call duration to show the approximate duration of your calls. •Call costs (network service) to show the cost of your last call or all calls in terms of units specified within the Show costs in function.Note: When no more charging units or currency units are left, calls may only be possible to the emergency number programmed into your phone (e.g. 112, 911 or other official emergency number).•GPRS data counter and scroll to check the amounts of sent and received data, and to clear the counters. The counters unit is a byte.•GPRS connection timer scroll to check the duration of the GPRS connections, and to clear the timers. ■Contacts (Menu 3)You can save names and phone numbers (contacts) in the phone’s contacts directory and in the SIM card’s memory.
Using the menu31• The phone’s directory may save names with numbers and textual notes for each name. You can also save an image for a certain number of names. The phone’s contacts directory uses shared memory.• Names and numbers saved in the SIM card’s memory, are indicated by .Searching for a name in contactsPress Menu, and select Contacts and Search. The following options may also be available:•Add contact and Delete. •Copy to copy names and phone numbers from the phone´s contact directory to the SIM card´s memory, or vice versa.•Settings to select how the names and numbers in contacts are displayed. Select Memory status to view the free and used memory capacity.•Speed dials to assign a number to a speed dialling key. To activate speed dialling see Speed dialling on page 34.•Info numbers to call the information numbers of your service provider if the numbers are included on your SIM card (network service).•Service numbers to call the service numbers of your service provider if the numbers are included on your SIM card (network service).•My numbers to view the phone numbers assigned to your SIM card. Only shown, if the numbers are included on your SIM card.•Caller groups to arrange the names and phone numbers saved in the memory into caller groups with different ringing tone.Saving multiple numbers, text items and an image per contactYou can save different types of phone numbers and short text items per name in the phone’s contacts directory.
Using the menu32The first number saved is automatically set as the default number. It is indicated with a frame around the number type indicator. When you select a name from the contacts directory this number is used to make a call.1. Make sure that the memory in use is either Phone or Phone and SIM. 2. Scroll to the name to which you want to add a new number or text item, and press Details.3. Press Options and select Add number, Add detail or Add image. If the name is stored in the SIM card’s memory, the name will be moved to the phone’s contacts directory.4. Select one of the following number types   General,  Mobile,  Home,  Office and   Fax, and key in the number,or text types   E-mail address,  Web address,  Postal address and  Note, and key in the text item.or open Images in Gallery and scroll to the desired image. Press Options and select Save to contacts. A copy of the image is added to the contact.■Profiles (Menu 4)Your phone has various setting groups, called profiles, for which you can customise the phone tones for different events and environments. Press Menu, and select Profiles. Scroll to a profile and press Select.• To activate the selected profile, select Activate.• To set the profile to be active for a certain amount of time up to 24 hours, select Timed and set the end time. When the time set for the profile expires, the previous profile that was not timed, becomes active.• To personalise the profile, select Personalise. Select the setting you want to change and make the changes.
Using the menu33■Settings (Menu 5)Personal shortcutsYou can add some specific functions to your personal shortcut list and activate them either in standby mode by pressing the right selection key (Go to) or accessing the Go to menu. Refer to Standby mode on page 10 and Go to (Menu 13) on page 50.Press Menu, and select Settings and Personal shortcuts. To select the name for the right selection key displayed in standby mode, select Right selection key. Select  Go to or Contacts.To select the desired functions for your personal shortcut list, select Select options and the list of available functions is shown. Scroll to the desired function and press Mark to add it to the shortcut list. To remove a function from the list, press Unmark.To rearrange the functions on the list, select Organise and the desired function. Press Move and select where you want to move the function.Screen saverPress Menu, and select Settings and Screen saver. With Select s. saver you can choose an animation or a still image as screen saver from Gallery. Select in Timeout after which time the screen saver will be activated. Select On to activate the screen saver.Independent of the screen saver settings, for power saving a digital clock view will overwrites the whole display when for a certain time no function of the phone has been used. See Power saving on page 11.Time and date settingsPress Menu, and select Settings, Time and date settings.Select Clock to set the phone to show the clock in standby mode, adjust the clock and select the time format.Select Date to set the phone to show the date in standby mode, set the date, the date format and the date separator.Select Auto-update of date & time (network service) to set the phone to update the time and date according to the current time zone.
Using the menu34The automatic update of the date and time does not change the time that you have set for the alarm clock, calendar or the alarm notes. They are in local time. Updating may cause some alarms that you have set to expire.Call settingsCall divertPress Menu, and select Settings, Call settings and Call divert (network service) to divert your incoming calls. For details, contact your service provider.To set the divert setting to on, select Activate, and then select the timeout after which the call is diverted, if this is available for the divert option. To set the divert setting to off, select Cancel. To check whether the call divert is activated or not, select Check status, if this is available for the divert option. Several divert options may be active at the same time.Anykey answerPress Menu, and select Settings, Call settings and Anykey answer. Select On and you can answer an incoming call by briefly pressing any key, except  , selection keys   and  , and  .Automatic redialPress Menu, and select Settings, Call settings and Automatic redial. Select On and your phone will make up to ten attempts to connect the call after an unsuccessful call attempt.Speed diallingPress Menu, and select Settings, Call settings and Speed dialling. Select On and the names and phone numbers assigned to the speed dialling keys, from   to  , can be dialled by pressing and holding the corresponding number key.Call waitingPress Menu, and select Settings, Call settings and Call waiting. Select Activate and the network will notify you of an incoming call while you have a call in progress (network service). See Call waiting on page 17.
Using the menu35Summary after callPress Menu, and select Settings, Call settings and Summary after call. Select On and the phone will briefly display the duration and cost (network service) of the last call.Send my caller identityPress Menu, and select Settings, Call settings and Send my caller identity. Select Yes and your phone number will be displayed to the person you are calling (network service) or select Set by network.Line for outgoing callsLine for outgoing calls is a network service to select the phone line 1 or 2 for making calls. Only shown if supported by your SIM card.Phone settingsLanguageSelect the language the phone shall display. Press Menu, and select Settings, Phone settings and Phone language. With Automatic the language according to the information on the SIM card is used.Automatic keyguardNote: When the keypad is locked, calls may be possible to the emergency number programmed into your phone (e.g. 112, 911 or other official emergency number). Key in the emergency number and press . The number is displayed only after you have keyed in its last digit.Press Menu, and select Settings, Phone settings and Automatic keyguard. Select On and key in the time delay (minutes:seconds). The keypad automatically locks in standby mode after the time delay to prevent accidental keypresses. Refer also Keypad lock (Keyguard) on page 14.Cell info displayPress Menu, and select Settings, Phone settings and Cell info display (network service). Select On and the phone indicates when it is used in a cellular network based on Micro Cellular Network (MCN) technology.
Using the menu36Welcome notePress Menu, and select Settings, Phone settings and Welcome note. Key in the note which is shown briefly when the phone is switched on.Network selectionPress Menu, and select Settings, Phone settings and Network selection. With Automatic the phone automatically selects one of the cellular networks available in your area. With Manual, you can select a network that has a roaming agreement with your home network operator.Confirm SIM service actionsSee SIM services (Menu 14) on page 50.Help text activationTo set the phone to show or not to show the help texts, press Menu, and select Settings, Phone settings and Help text activation.Start-up toneTo set the phone to play or not to play a start-up tone when the phone is switched on, press Menu, and select Settings, Phone settings and Start-up tone.Display settings WallpaperLet your phone display a background picture (wallpaper) from Gallery menu when the phone is in standby mode.To select a picture, press Menu, and select Settings, Display settings and Wallpaper. Select Select image and choose a picture from a folder in the Gallery. To set the picture as the wallpaper, press Options and select Set as wallpaper. To activate/deactivate the wallpaper, select On/Off, respectively.Colour schemesTo change the colour in some display components, for example, indicators and signal bars, press Menu, and select Settings, Display settings and Colour schemes.
Using the menu37Operator logoTo set your phone to display or hide the operator logo, press Menu, and select Settings, Display settings and Operator logo.Display brightnessTo change the display contrast level used on the phone display, press Menu, and select Settings, Display settings and Display brightness. Use  and   to adjust the contrast level.Tone settingsYou can change the settings of the selected active profile.Press Menu, and select Settings and Tone settings. Select and change Incoming call alert, Ringing tone, Ringing volume, Rhythmic backlight alert, Vibrating alert, Message alert tone, Keypad tones and Warning tones. You can find the same settings in the Profiles menu, see Profiles (Menu 4) on page 32.Select Alert for to set the phone to ring only upon calls from phone numbers that belong to a selected caller group. Scroll to the caller group you want or All calls and press Mark.Enhancement settingsThis menu is shown only if the phone is or has been connected to some compatible Nokia audio enhancements, for example to a headset.Press Menu, and select Settings and Enhancement settings. Select one of the displayed enhancements.Select Default profile to select the profile the phone uses when the enhancement is connected.Select Automatic answer to set the phone to automatically answer an incoming call after five seconds. If the Incoming call alert is set to Beep once or Off, automatic answer will not be available.Select Lights to set the lights permanently On. Select Automatic to set the lights on for 15 seconds after a keypress. The Lights option is available only when Handsfree is selected.
Using the menu38Security settingsNote: When security features that restrict calls are in use (call barring, closed user group and fixed dialling), calls may be possible to certain emergency numbers in some networks (e.g. 112, 911 or other official emergency numbers).Press Menu, and select Settings and Security settings. Select•PIN code request to set the phone to ask for your PIN code every time the phone is switched on. Some SIM cards do not allow turning this function off.•Call barring service (network service) to restrict incoming calls to and outgoing calls from your phone.•Fixed dialling to restrict your outgoing calls to selected phone numbers if this function is supported by your SIM card.•Closed user group. With this network service you can specify a group of people whom you can call and who can call you.•Security level. The preset security code is 12345.Select Phone to set the phone to ask for the security code when a new SIM card is inserted. Select Memory and the phone will ask for the security code when the SIM card’s memory is selected and you want to change the memory in use.•Access codes to change the security code, PIN code, PIN2 code or barring password.Restore factory settingsTo reset some of the menu settings to their original values, press Menu, and select Settings and Restore factory settings. Key in the security code. The names and phone numbers saved in the contacts list are not deleted.■Alarm clock (Menu 6)You can set the phone to alarm at a desired time. Press Menu, and select Alarm clock. To set the alarm, select Alarm time and key in the alarm time. To change the time when the alarm time is set, select On.
Using the menu39To set a tone for the alarm, select Alarm tone and the desired tone.When the alarm time expiresThe phone will sound an alert tone, and flash Alarm! and the current time on the display, even if the phone was switched off. Press Stop to stop the alarm. If you let the phone alarm for a minute or press Snooze, the alarm stops for about ten minutes and then resumes.If the alarm time is reached while the phone is switched off, the phone switches itself on and starts sounding the alarm tone. If you press Stop, the phone asks whether you want to activate the phone, Switch the phone on?. Press No to switch off the phone or Yes to switch on the phone.Note: Do not press Yes when wireless phone use is prohibited or when it may cause interference or danger.■Gallery (Menu 7)You can save images and ringing tones, for example, if received in a multimedia message, in the folders of the gallery, see Reading and replying to a multimedia message on page 27. The gallery uses shared memory.Note: Your phone must be switched on to use this function. Do not switch the phone on when wireless phone use is prohibited or when it may cause interference or danger.To view the folders, press Menu, and select Gallery and View folders. The list of options is shown. Open the desired folder and the list of files in the folder is shown. Scroll to the desired file. Press Options and some of the following options may be available: Open, Delete, Send, Move, Rename, Set as wallpaper, Set as ring tone, Details and Sort.Other options are: Add folder, Delete folder, Rename folder, Gallery downloads to download more images and tones.■Calendar (Menu 8) The calendar uses shared memory.Note: Your phone must be switched on to use the functions in the Calendar menu. Do not switch the phone on when wireless phone use is prohibited or when it may cause interference or danger.
Using the menu40Press Menu and select Calendar.The current day is indicated with a frame. A day with a note appears in bolded. To view the day notes, scroll to a day, press Options and select Day notes. Tip: To scroll to the day notes day by day press   or  .To view a single note, press Options and select View. Other options for the calendar view may be:• Options for making a note, sending a note to another phone, copying a note to another day or deleting, editing, moving and repeating a note.•Settings to set the date, time, date or time format, or the first day of the week. In the Auto-delete option you can set the phone to delete old notes automatically after a specified time.Making a calendar notePress Menu, and select Calendar. Scroll to the date you want, press Options and select Make a note. Select one of the following note types:  Reminder,  Call or   Birthday.When the phone alarms for a noteThe phone beeps, and displays the note. With a call note  , you can call the displayed number by pressing  . To stop the alarm and view the note, press View. To stop the alarm without viewing the note, press Exit.■Games (Menu 9)Your phone software includes some games specially designed for this Nokia phone. Note: Your phone must be switched on to use this function. Do not switch the phone on when wireless phone use is prohibited or when it may cause interference or danger.
Using the menu41Launching a gamePress Menu, and select Games and Select game. Select a game or a game set, press Options and select Open or press  .Other options for games, see Other options available for an application on page 42.Game downloadsPress Menu, and select Games and Game downloads. The list of available bookmarks is shown. Select More bookmarks to access the list of bookmarks in the Services menu, see Bookmarks on page 48.Select a bookmark to connect to the desired service. For the availability of different services, pricing and tariffs, contact your service provider.The games use shared memory. To view the size of memory available for game installations, press Menu, and select Games and Memory. Note that Nokia does not warrant for applications from non-Nokia sites. If you choose to download applications from them, you should take the same precautions, for security or content, as you would with any site. Game settingsPress Menu, and select Games and Settings to set sounds, lights and shakes for the game. ■Applications (Menu 10)Your phone software includes some Java applications specially designed for this Nokia phone. Note: The phone must be switched on to use this function. Do not switch on the phone when the use of a wireless phone is prohibited or when it may cause interference or danger.Launching an applicationPress Menu, and select Applications and Select application. Scroll to an application, press Options and select Open or press  .
Using the menu42Other options available for an application•Delete to delete the application from the phone.•Web access to restrict the application from accessing the network.•Update version to check if a new version of the application is available for download from the services if supported by the application. •Web page to provide further information or additional data for the application from an Internet page. This feature needs to be supported by the network. It is only displayed if an Internet address has been provided with the application. •Connect via the specific default settings that some applications need for the browser. •Details to give additional information about the application.Downloading an applicationYour phone supports J2METM Java applications. Make sure that the application is compatible with your phone before downloading it. You can download new Java applications in different ways:•Press Menu, and select Applications and App. downloads. The list of available bookmarks is shown. Select More bookmarks to access the list of bookmarks in the Services menu, see Bookmarks on page 48.Select the appropriate bookmark to connect to the desired page. For the availability of different services, pricing and tariffs, contact your service provider.•Press Menu, and select Services and Download links. Select to download an appropriate application or game. See Downloading on page 48.• Use the game download functionality, see Game downloads on page 41.• Use the Nokia Application installer from PC Suite to download the applications from a compatible PC in your phone.Note that Nokia does not warrant for applications from non-Nokia sites. If you choose to download Java applications from them, you should take the same precautions, for security or content, as you would with any site.
Using the menu43Note that when downloading a game or an application, it may be saved in Games menu instead of the Applications menu.The applications use shared memory. To view the size of memory available for application installations, press Menu, and select Applications and Memory.The following texts may appear during a download or during an operation of a Java application: Action failed, Application error, Application not supported, Call in progress, File format unknown, File too large, Invalid file, Unable to start, Unable to run application, Unknown.■Extras (Menu 11)Your phone provides some practical functions in this menu. Note: Your phone must be switched on to use the functions in Extras menu. Do not switch the phone on when wireless phone use is prohibited or when it may cause interference or danger.CalculatorThe phone is provided with a calculator which can also be used for rough currency conversions.This calculator has a limited accuracy and rounding errors may occur, especially in long divisions.Press Menu, and select Extras and Calculator.Making calculationsThe keys   -   insert a digit.   inserts a decimal point. To delete the last digit, press Clear. To change the sign, press Options and select Change sign. Press   once for "+", twice for "-", three times for "*"or four times for "/". To get the result, press Options and select Equals. To clear the display for a new calculation, press and hold Clear.Making a currency conversionTo save the exchange rate: Press Options, and select Exchange rate. Select Foreign unit in domestic units or Domestic unit in foreign units, and key in the value (press   for a decimal point).
Using the menu44To make the conversion: key in the currency amount to be converted, press Options, and select In domestic or In foreign.Countdown timerYou can set the alarm to sound after a period of lapsed time.Press Menu, and select Extras and Countdown timer. Key in the alarm time and if desired a note. When the timer is running,   is shown in standby mode. To change the countdown time, select Change time, or to stop the timer, select Stop timer.When the alarm time is reached, the phone sounds a tone and flashes the related text. Press any key to stop the alarm.StopwatchPress Menu, and select Extras and Stopwatch. Select Split timing or Lap timing, and press Start. Press Split to record a split time, Lap to record a lap time or Stop to finish timing. You can scroll through the recorded times shown below the overall time.When the timing is stopped, you can press Options for Start (split times only), Save, or Reset. If you select Start, timing continues from the previously timed event. If you select Reset, the split or lap times are reset.Setting the timing to continue in the backgroundWhile the time is running, press  . When the stopwatch is on,   is shown in standby mode. To view the timing, key in the Stopwatch menu and select Continue. Running the stopwatch consumes battery. Be careful not to let it run unintentionally in the background.■Services (Menu 12)Some services are specially designed for mobile phones.With your phone’s multi-mode browser you can view the services that use Wireless Mark-Up Language (WML) or extensible HyperText Markup Language (xHTML) on their pages.
Using the menu45Check the availability of these services, pricing and tariffs with your the service provider and network operator. They will also give you instructions on how to use their services.Note: Your phone must be switched on to use this function. Do not switch the phone on when wireless phone use is prohibited or when it may cause interference or danger.Setting up the phone for a serviceYou may be able to receive the service settings as an OTA message from the service provider that offers the service that you want to use. You can also key in the settings manually or add and edit the settings with PC Suite. For more information and for appropriate settings, contact your service provider.Saving the service settings received as an OTA messageWhen you receive the service settings as an OTA message, Service settings received is displayed.To save the settings, press Options and select Save. If no settings are saved in Active service settings, the settings are saved under the first free connection set and also activated. If there are settings saved in Active service settings, Activate saved service settings? will be displayed. To activate the saved settings, press Yes, or to save them only, press No.To view the received settings first, press Options and select View and then save the settings. To discard the settings press Options and select Discard. Keying in the service settings manuallyPress Menu, and select Services, Settings, Connection settings and Active service settings. Select the set where you want to save the service settings and press Activate.Select Edit active service settings and then select and key in the settings according to the information you have received from your service provider. Note that some of the settings depend on the Bearer settings menu.
Using the menu46Making a connection to a serviceFirst activate the settings of the service, press Menu, and select Services,  Settings and Connection settings. Select Active service settings and scroll to the set you want to use and press Activate.To make a connection to the service use one of the following ways:• Open the start page of the service: Press Menu, and select Services and Home, or in standby mode press and hold  .• Select a bookmark of the service: Press Menu, and select Services, Bookmarks, and select a bookmark.If the bookmark does not work with the current active service settings, activate another set of service settings and try again.• Key in the address of the service: Press Menu, and select Services and Go to address, and key in the address.Browsing the pages of a serviceThe function of the phone keys may vary in different services. Follow the text guides on the phone display.During a GPRS connection the indicator   is shown. If you receive a call or a text message, or make a call during a GPRS connection, the indicator   will be shown on the display to indicate that the GPRS connection is suspended (on hold).Using the phone keys while browsing• Use the scroll keys   or   to browse the page.• To select a highlighted item for example a link shown as underlined text, press  .• To key in letters and numbers, press the keys   -   and to key in special characters, press the key  .Some of the following options may be available while browsing. Press Options and select the desired option: Home (start page of the selected service), Bookmarks (see page 48), Add bookmark, View image (or View images), Go to address, Shortcuts (to open a new list of options that are, for example, specific to the page, Service inbox (see page 48), Appear. settings (see page 47), Cookie settings (see page 47), Use detail, Reload,
Using the menu47Clear the cache (see page 49), Security info, Quit (to disconnect the connection, see page 47). The service provider may also offer other options.Note: If you have tried to access or have accessed confidential information requiring passwords (for example, your bank account), clear the cache of your phone after each use.To empty the cache, see Clearing the cache memory on page 49.Direct callingThe multi-mode browser supports functions which you can access while browsing. You can make a voice call, send DTMF tones while a voice call is in progress, and save in contacts a name and a phone number from a page.Disconnect from a serviceTo quit browsing and to end the  connection, press Options and select Quit. When Quit browsing? is shown, press Yes.Alternatively, press  . If GSM data is the selected data bearer, press  twice. The phone ends the connection to the service.Appearance settings of the multi-mode browserPress Menu, and select Services, Settings and Appearance settings, or while browsing, press Options, and select Other options and Appear. settings. Select Text wrapping and On to let the text continue on the next line if it cannot be shown on one line. If you select Off, the text is abbreviated if it is too long to be shown on one line. Select Show images and No and any pictures appearing on the page are not shown. This can speed up the browsing of pages that contain a lot of pictures.Selecting Cookie settingsA cookie is data that a site saves in your phone’s browser cache memory. Cookies will be saved until you clear the cache memory, see Clearing the cache memory on page 49.
Using the menu48While browsing, press Options, and select Other options and Security, or in standby mode, press Menu, and select Services, Settings and Security settings. Select Cookies and select Allow or Reject.BookmarksYou can save page addresses as bookmarks in the phone. The bookmarks use shared memory.While browsing, press Options and select Bookmarks, or in standby mode, press Menu, and select Services and Bookmarks. Scroll to the bookmark you want to use and press Options (or  ) to connect to the page associated with the bookmark, or press Options for the following functions: Go to, View, Edit, Delete, Send, New bookmark.Note that your phone may have some pre-installed bookmarks for sites not affiliated to Nokia. Nokia does not warrant or endorse these sites. If you choose to access them, you should take the same precautions, for security or content, as you would with any Internet site. Receiving a bookmarkWhen you have received a bookmark as an Over The Air (OTA) message, press Save to save it to the bookmark list, or press Options and View or Discard.DownloadingTo download more tones, images, games or applications to your phone, press Menu, and select Services and Download links. Select Tone downloads, Image downloads, Game downloads or App. downloads to download tones, images, games or applications, respectively.Download content only from the sources you trust. See also Game downloads on page 41 and Downloading an application on page 42.Service inboxThe phone is able to receive service messages sent by your service provider (network service). To set the phone to receive service messages: Press Menu, and select Services, Settings, Service inbox settings, Service messages, and On.
Using the menu49To view a received service message, press View. Or press Exit to move the message in the Service inbox. To access the Service inbox later, press Menu, and select Services, and Service inbox, or while browsing, press Options, and select Other options and Service inbox. Press Options and select Retrieve to activate the multi-mode browser and download the indicated content, or select Details or Delete.Clearing the cache memoryNote: The information or services you have accessed are stored in the cache of your phone. A cache is a buffer memory, which is used to store data temporarily. If you have tried to access or have accessed confidential information requiring passwords (for example, your bank account), empty the cache of your phone after each use.Press Menu, and select Services, and Clear the cache. While browsing, press Options, and select Other options and Clear the cache. Authority certificatesFor using some services, such as banking services, you need security certificates. Using the certificates can help you improve the security of connections between your phone and a gateway or server, if the Connection security is set to On.You can download authority certificate from a page, if the service supports the use of authority certificates. After the download, you can view the certificate and then save or delete it. Saved certificates are added to the certificate list in the phone.The phone indicates if the identity of the server or gateway cannot be verified, if the server or gateway certificate is not authentic or if you do not have the correct authority certificate in your phone.Viewing the list of authority certificatesPress Menu, select Services, Settings, Security settings and Authority certificates.See also Security info in Using the phone keys while browsing on page 46.
Using the menu50Security indicatorIf the security indicator   is displayed during a connection, the data transmission between the phone and the gateway or server (identified by the IP address in the Edit active service settings) is encrypted.However, the security indicator does not indicate that the data transmission between the gateway and the content server (the location where the requested resource is stored) is secure. It is up to the service provider to secure the data transmission between the gateway and the content server.■Go to (Menu 13)To access some specific functions quickly, press Menu and select Go to and select the desired function from the list.If you wish to add some functions to  the list, press Add, scroll to the function that you want to add and press Mark.To remove or add more functions on the list, see Personal shortcuts on page 33.■SIM services (Menu 14)Your SIM card may provide additional services that you can access in this menu that is shown only if it is supported by your SIM card. The name and contents of the menu depends on the available services.Note: For availability, rates and information on using SIM services, contact your SIM card vendor, e.g. network operator, service provider or other vendor.Note that accessing these services may involve sending a text message (SMS) or making a phone call for which you may be charged. See also Confirm SIM service actions, menu 4-3-6.
PC Connectivity515. PC ConnectivityWith the PC suite you can, for example, create and send text and picture messages, synchronise contacts and calendar between your phone and a compatible PC.You may find more information and downloadable files, e.g. PC suite in the support area on the Nokia’s web site, www.nokia.com.■PC SuiteThe PC Suite contains the following features:•Nokia Application Installer to install Java applications from the PC to the phone.•Nokia Image Converter to make images usable for multimedia messages or wallpapers and to transfer them to your phone.•Nokia Sound Converter to edit polyphonic ringing tones to be compatible with your phone and to transfer them to your phone.•Nokia Content Copier to copy information or back-up information from your phone to the PC or to another compatible Nokia phone.•Nokia PC WAP Manager to edit and send your bookmarks or update the connection sets to your phone.•Nokia Phone Editor to send text messages and edit the contacts directory and message settings of your phone.•Nokia PC Sync to synchronise the contacts directory and calendar between your phone and a compatible PC.•Nokia Connection Manager to select the connection type between the PC and the phone.•Nokia PC Browser to copy images and tones from your phone to your PC and vice versa.Note: Copyright protection may prevent some images, ringing tones and other content from being copied, modified, transferred or forwarded.
Battery statements526. Battery statements■Charging and DischargingYour phone is powered by a rechargeable battery.Note that a new battery’s full performance is achieved only after two or three complete charge and discharge cycles!The battery can be charged and discharged hundreds of times but it will eventually wear out. When the operating time (talk-time and standby time) is noticeably shorter than normal, it is time to buy a new battery.Use only batteries approved by the phone manufacturer and recharge your battery only with the chargers approved by the manufacturer. Unplug the charger when not in use. Do not leave the battery connected to a charger for longer than a week, since overcharging may shorten its lifetime. If left unused a fully charged battery will discharge itself over time.Temperature extremes can affect the ability of your battery to charge.Use the battery only for its intended purpose.Never use any charger or battery which is damaged.Do not short-circuit the battery. Accidental short-circuiting can occur when a metallic object (coin, clip or pen) causes direct connection of the + and - terminals of the battery (metal strips on the battery) for example when you carry a spare battery in your pocket or purse. Short-circuiting the terminals may damage the battery or the connecting object.Leaving the battery in hot or cold places, such as in a closed car in summer or winter conditions, will reduce the capacity and lifetime of the battery. Always try to keep the battery between 15°C and 25°C (59°F and 77°F). A phone with a hot or cold battery may temporarily not work, even when the battery is fully charged. Batteries' performance is particularly limited in temperatures well below freezing.Do not dispose of batteries in a fire !Dispose of batteries according to local regulations (e.g. recycling). Do not dispose as household waste.
537. Technical InformationWeight....................................85 grams (3 ounces) with BL-5C batteryBattery....................................850 mAh Li-Ion BatteryNetworks................................Wireless networks GSM 900, 1800 and1900Size (volume)........................4.21 cubic inches (69 cc)Frequency range (Rx)..................................................EGSM 900: 880 - 915 MHz..................................................GSM 900: 890 - 915 MHz..................................................GSM 1800: 1710 - 1785 MHz..................................................GSM1900: 1850 - 1910 MHzFrequency range (Tx)..................................................EGSM 900: 925 - 960 MHz..................................................GSM 900: 935 - 960 MHz..................................................GSM1800: 1805 - 1880 MHz..................................................GSM1900: 1930 - 1990 MHzTx output power..................2 W (max)Battery voltage ....................3.7 V DCNumber of channels...........299
548. PatentsManufactured or sold under one or more of the following US Patents:45583024868846496919250013725045973506192851011755212834523009152336345241284524158353034045311179533163853353625353328538478253902235396657540094954164355442521544481654463645479476548708454932555519885552636655531255557639558124456252745640395566405356690695677620569203256994065699482570139257295345729541573468357549765760568578264657941425802465580508458053015818437582708258358895839101584488458452195857151586217858706835887266588977058924755898925590782359147965915440591786859208265926138592676959302335946651595354159566255956633596038959639015966374596637859691925970059598713759917165991857599952360058576011554601185360145736026161602856760291286038238604376060471966049796605543960601936069923608153460849626088746609458760979646112099611561761187756122498612832261285096138091614424361446766151485615150761636096164547616724861700736185295618890961953386199035620187662195606240076624007962495846266330628237362892056292668629528663106096324412D406261D425480D426830D445415RE32580
55CARE AND MAINTENANCEYour phone is a product of superior design and craftsmanship and should be treated with care. The suggestions below will help you to fulfil any warranty obligations and to enjoy this product for many years.• Keep the phone and all its parts and accessories out of the reach of small children.• Keep the phone dry. Precipitation, humidity and all types of liquids or moisture can contain minerals that will corrode electronic circuits.• Do not use or store the phone in dusty, dirty areas. Its moving parts can be damaged.• Do not store the phone in hot areas. High temperatures can shorten the life of electronic devices, damage batteries, and warp or melt certain plastics.• Do not store the phone in cold areas. When it warms up (to its normal temperature), moisture can form inside, which may damage electronic circuit boards.• Do not attempt to open the phone. Nonexpert handling may damage it.• Do not drop, knock or shake the phone. Rough handling can break internal circuit boards.• Do not use harsh chemicals, cleaning solvents, or strong detergents to clean the phone.• Do not paint the phone. Paint can clog the moving parts and prevent proper operation.• Use only the supplied or an approved replacement antenna. Unauthorised antennas, modifications or attachments could damage the phone and may violate regulations governing radio devices.All of the above suggestions apply equally to your phone, battery, charger or any accessory. If any of them is not working properly, take it to your nearest qualified service facility. The personnel there will assist you and, if necessary, arrange for service.
56IMPORTANT SAFETY INFORMATION■Traffic safetyDo not use a handheld telephone while driving a vehicle. Always secure the phone in its holder; do not place the phone on the passenger seat or where it can break loose in a collision or sudden stop.Remember road safety always comes first!■Operating environmentRemember to follow any special regulations and always switch off your phone wherever forbidden, or when it may cause interference or danger.Use the phone only in its normal operating positions.When connecting the phone or accessory to another device, read its user’s guide for safety instructions. Don’t connect incompatible products. As with other mobile radio transmitting equipment, users are advised to operate this equipment only in the normal operating position (held to your ear with the antenna pointing over your shoulder).■Electronic devicesMost modern electronic equipment is shielded from radio frequency (RF) signals. However, certain electronic equipment may not be shielded against the RF signals from your wireless phone.PacemakersPacemaker manufacturers recommend a distance of 6 inches (20 cm) be maintained between a handheld wireless phone and a pacemaker to avoid interference with the pacemaker. These recommendations are consistent with independent research and recommendations of Wireless Technology Research.PERSONS WITH A PACEMAKER:• Should always keep the phone more than 20 cm (6 inches) from their pacemaker when the phone is switched on.• Should not carry the phone in a breast pocket.
57• Should use the ear opposite the pacemaker to minimize the potential for interference.• If you have any reason to suspect that interference is taking place, switch off your phone immediately.Hearing aidsSome digital wireless phones may interfere with hearing aids. In the event of such interference, consult your wireless provider.Other medical devicesOperation of any radio transmitting equipment, including cellular phones, may interfere with the functionality of inadequately protected medical devices. Consult a physician or the manufacturer of the medical device to determine if they are adequately shielded from external RF energy or if you have any questions. Switch off your phone in health care facilities when any regulations posted in these areas instruct you to do so. Hospitals or health care facilities may be using equipment that could be sensitive to external RF energy.■VehiclesRF signals may affect improperly installed or inadequately shielded electronic systems in motor vehicles (for example, electronic fuel injection systems, electronic antiskid/antilock braking systems, electronic speed control systems, air bag systems). Check with the manufacturer or its representative regarding your vehicle. You should also consult the manufacturer of any equipment that has been added to your vehicle.■Posted facilitiesSwitch your phone off in any facility where posted notices so require.■Potentially explosive atmospheresSwitch off your phone when in any area with a potentially explosive atmosphere and obey all signs and instructions. Sparks in such areas could cause an explosion or fire resulting in bodily injury or even death.Users are advised to switch off the phone when at a refueling point
58(service station). Users are reminded of the need to observe restrictions on the use of radio equipment in fuel depots (fuel storage and distribution areas), chemical plants, or where blasting operations are in progress.Areas with a potentially explosive atmosphere are often but not always clearly marked. They include below deck on boats; chemical transfer or storage facilities; vehicles using liquefied petroleum gas (such as propane or butane); areas where the air contains chemicals or particles, such as grain, dust, or metal powders; and any other area where you would normally be advised to turn off your vehicle engine.■VehiclesOnly qualified personnel should service the phone or install the phone in a vehicle. Faulty installation or service may be dangerous and may invalidate any warranty which may apply to the unit.Check regularly that all wireless phone equipment in your vehicle is mounted and operating properly.Do not store or carry flammable liquids, gases, or explosive materials in the same compartment as the phone, its parts, or accessories.For vehicles equipped with an air bag, remember that an air bag inflates with great force. Do not place objects, including both installed or portable wireless equipment in the area over the air bag or in the air bag deployment area. If in-vehicle wireless equipment is improperly installed and the air bag inflates, serious injury could result.■AircraftFCC regulations prohibit using your phone while in the air.Switch off your phone before boarding an aircraft. The use of wireless telephones in an aircraft may be dangerous to the operation of the aircraft, disrupt the wireless telephone network, and may be illegal. Failure to observe these instructions may lead to suspension or denial of telephone services to the offender, legal action, or both.
59■Emergency callsImportant: This phone, like any wireless phone, operates using radio signals, wireless, and landline networks as well as userprogrammed functions. Because of this, connections in all conditions cannot be guaranteed. Therefore you should never rely solely upon any wireless phone for essential communications (for example, medical emergencies).Emergency calls may not be possible on all wireless phone networks or when certain network services and/or phone features are in use. Check with local service providers.MAKING AN EMERGENCY CALLNote: Some networks may require that a valid SIM card be properly inserted in the phone. Official emergency numbers vary by location (for example, 911 or other official emergency number).1. If the phone is not on, switch it on. Check for adequate signal strength.2. Press   as many times as needed (for example, to exit a call, to exit a menu, etc.) to clear the display and ready the phone for calls.3. Enter the emergency number for your present location (for example, 911 or other official emergency number). Emergency numbers vary by location.4. Press the   key.If certain features are in use, you may first need to turn those features off before you can make an emergency call. Consult this user guide and your local cellular service provider.When making an emergency call, remember to give all the necessary information as accurately as possible. Remember that your wireless phone may be the only means of communication at the scene of an accident - do not end the call until given permission to do so.■CERTIFICATION INFORMATION (SAR)THIS MODEL PHONE MEETS THE GOVERNMENT’S REQUIREMENTS FOR EXPOSURE TO RADIO WAVES.Your wireless phone is a radio transmitter and receiver.  It is designed and manufactured not to exceed the emission limits for exposure to radiofrequency (RF) energy set by the Federal Communications
60Commission of the U.S. Government.  These limits are part of comprehensive guidelines and establish permitted levels of RF energy for the general population. The guidelines are based on standards that were developed by independent scientific organizations through periodic and thorough evaluation of scientific studies.  The standards include a substantial safety margin designed to assure the safety of all persons, regardless of age and health.The exposure standard for wireless mobile phones employs a unit of measurement known as the Specific Absorption Rate, or SAR.  The SAR limit set by the FCC is 1.6W/kg. Tests for SAR are conducted using standard operating positions accepted by the FCC with the phone transmitting at its highest certified power level in all tested frequency bands.  Although the SAR is determined at the highest certified power level, the actual SAR level of the phone while operating can be well below the maximum value.  This is because the phone is designed to operate at multiple power levels so as to use only the power required to reach the network.  In general, the closer you are to a wireless base station antenna, the lower the power output.Before a phone model is available for sale to the public, it must be tested and certified to the FCC that it does not exceed the limit established by the government-adopted requirement for safe exposure.  The tests are performed in positions and locations (e.g., at the ear and  worn on the body) as required by the FCC for each model. The highest SAR value for this model phone as reported to the FCC when tested for use at the ear is 0.72 W/kg and when worn on the body, as described in this user guide, is 0.58 W/kg.(Body-worn measurements differ among phone models, depending upon available accessories and FCC requirements). While there may be differences between the SAR levels of various phones and at various positions, they all meet the government requirement. The FCC has granted an Equipment Authorization for this model phone with all reported SAR levels evaluated as in compliance with the FCC RF exposure guidelines.  SAR information on this model phone is on file with the FCC and can be found under the Display Grant section of http://www.fcc.gov/oet/fccid after searching on FCC ID PPIRH-19For body-worn operation, this phone has been tested and meets the FCC RF exposure guidelines for use with a carry case, belt clip or holder that
61contains no metal and that positions the handset a minimum of 7/8 inch (2.2 cm) from the body. Use of other carry cases, belt clips or holders may not ensure compliance with the FCC RF exposure guidelines. If you do not use a body-worn enhancement and are not holding the phone at the ear, position the handset a minimum of 7/8 inch (2.2 cm) from your body when the phone is switched on.*In the United States and Canada, the SAR limit for mobile phones used by the public is 1.6 watts/kilogram (W/kg) averaged over one gram of tissue. The standard incorporates a substantial margin of safety to give additional protection for the public and to account for any variations in measurements. SAR values may vary depending on national reporting requirements and the network band. For SAR information in other regions please look under product information at www.nokia.com.
62APPENDIX■A message from the CTIA© 2001 Cellular Telecommunications & Internet Association. All Rights Reserved.1250 Connecticut Avenue, NW Suite 800, Washington, DC 20036.Phone: (202) 785-0081Safety is the most important call you will ever make.A Guide to Safe and Responsible Wireless Phone UseTens of millions of people in the U.S. today take advantage of the unique combination of convenience, safety and value delivered by the wireless telephone. Quite simply, the wireless phone gives people the powerful ability to communicate by voice--almost anywhere, anytime--with the boss, with a client, with the kids, with emergency personnel or even with the police. Each year, Americans make billions of calls from their wireless phones, and the numbers are rapidly growing.But an important responsibility accompanies those benefits, one that every wireless phone user must uphold. When driving a car, driving is your first responsibility. A wireless phone can be an invaluable tool, but good judgment must be exercised at all times while driving a motor vehicle--whether on the phone or not.The basic lessons are ones we all learned as teenagers. Driving requires alertness, caution and courtesy. It requires a heavy dose of basic common sense---keep your head up, keep your eyes on the road, check your mirrors frequently and watch out for other drivers. It requires obeying all traffic signs and signals and staying within the speed limit. It means using seatbelts and requiring other passengers to do the same.But with wireless phone use, driving safely means a little more. This brochure is a call to wireless phone users everywhere to make safety their first priority when behind the wheel of a car. Wireless telecommunications is keeping us in touch, simplifying our lives, protecting us in emergencies and providing opportunities to help others in need.
63When it comes to the use of wireless phones, safety is your most important call.Wireless Phone “Safety Tips”Below are safety tips to follow while driving and using a wireless phone which should be easy to remember.1. Get to know your wireless phone and its features such as speed dial and redial. Carefully read your instruction manual and learn to take advantage of valuable features most phones offer, including automatic redial and memory. Also, work to memorize the phone keypad so you can use the speed dial function without taking your attention off the road.2. When available, use a hands free device. A number of hands free wireless phone accessories are readily available today. Whether you choose an installed mounted device for your wireless phone or a speaker phone accessory, take advantage of these devices if available to you.3. Position your wireless phone within easy reach. Make sure you place your wireless phone within easy reach and where you can grab it without removing your eyes from the road. If you get an incoming call at an inconvenient time, if possible, let your voice mail answer it for you.4. Suspend conversations during hazardous driving conditions or situations. Let the person you are speaking with know you are driving; if necessary, suspend the call in heavy traffic or hazardous weather conditions. Rain, sleet, snow and ice can be hazardous, but so is heavy traffic. As a driver, your first responsibility is to pay attention to the road.5. Do not take notes or look up phone numbers while driving. If you are reading an address book or business card, or writing a “to do” list while driving a car, you are not watching where you are going. It’s common sense. Don’t get caught in a dangerous situation because you are reading or writing and not paying attention to the road or nearby vehicles.6. Dial sensibly and assess the traffic; if possible, place calls when you are not moving or before pulling into traffic. Try to plan your calls
64before you begin your trip or attempt to coincide your calls with times you may be stopped at a stop sign, red light or otherwise stationary. But if you need to dial while driving, follow this simple tip--dial only a few numbers, check the road and your mirrors, then continue.7. Do not engage in stressful or emotional conversations that may be distracting. Stressful or emotional conversations and driving do not mix--they are distracting and even dangerous when you are behind the wheel of a car. Make people you are talking with aware you are driving and if necessary, suspend conversations which have the potential to divert your attention from the road.8. Use your wireless phone to call for help. Your wireless phone is one of the greatest tools you can own to protect yourself and your family in dangerous situations--with your phone at your side, help is only three numbers away. Dial 9-1-1 or other local emergency number in the case of fire, traffic accident, road hazard or medical emergency. Remember, it is a free call on your wireless phone!9. Use your wireless phone to help others in emergencies. Your wireless phone provides you a perfect opportunity to be a “Good Samaritan” in your community. If you see an auto accident, crime in progress or other serious emergency where lives are in danger, call 9-1-1 or other local emergency number, as you would want others to do for you.10. Call roadside assistance or a special wireless non-emergency assistance number when necessary. Certain situations you encounter while driving may require attention, but are not urgent enough to merit a call for emergency services. But you still can use your wireless phone to lend a hand. If you see a broken-down vehicle posing no serious hazard, a broken traffic signal, a minor traffic accident where no one appears injured or a vehicle you know to be stolen, call roadside assistance or other special non-emergency wireless number.Careless, distracted individuals and people driving irresponsibly represent a hazard to everyone on the road. Since 1984, the Cellular Telecommunications Industry Association and the wireless industry have conducted educational outreach to inform wireless phone users of
65their responsibilities as safe drivers and good citizens. As we approach a new century, more and more of us will take advantage of the benefits of wireless telephones. And, as we take to the roads, we all have a responsibility to drive safely.The wireless industry reminds you to use your phone safely when driving.For more information, please call 1-888-901-SAFE.For updates: http://www.wow-com.com/consumer/issues/driving/articles.cfm?ID=85© 2001 Cellular Telecommunications & Internet Association.All Rights Reserved.1250 Connecticut Avenue, NW Suite 800, Washington, DC 20036. Phone: (202) 785-0081■A message from the U.S. Food and Drug Administration1. Do wireless phones pose a health hazard?The available scientific evidence does not show that any health problems are associated with using wireless phones. There is no proof, however, that wireless phones are absolutely safe. Wireless phones emit low levels of radiofrequency energy (RF) in the microwave range while being used. They also emit very low levels of RF when in the stand-by mode. Whereas high levels of RF can produce health effects (by heating tissue), exposure to low level RF that does not produce heating effects causes no known adverse health effects. Many studies of low level RF exposures have not found any biological effects. Some studies have suggested that some biological effects may occur, but such findings have not been confirmed by additional research. In some cases, other researchers have had difficulty in reproducing those studies, or in determining the reasons for inconsistent results.2. What is FDA’s role concerning the safety of wireless phones?Under the law, FDA does not review the safety of radiation-emitting consumer products such as wireless phones before they can be sold, as it does with new drugs or medical devices. However, the agency has authority to take action if wireless phones are shown to emit
66radiofrequency energy (RF) at a level that is hazardous to the user. In such a case, FDA could require the manufacturers of wireless phones to notify users of the health hazard and to repair, replace or recall the phones so that the hazard no longer exists.Although the existing scientific data do not justify FDA regulatory actions, FDA has urged the wireless phone industry to take a number of steps, including the following:• Support needed research into possible biological effects of RF of the type emitted by wireless phones;• Design wireless phones in a way that minimizes any RF exposure to the user that is not necessary for device function; and• Cooperate in providing users of wireless phones with the best possible information on possible effects of wireless phone use on human health.FDA belongs to an interagency working group of the federal agencies that have responsibility for different aspects of RF safety to ensure coordinated efforts at the federal level. The following agencies belong to this working group:• National Institute for Occupational Safety and Health• Environmental Protection Agency• Federal Communications Commission• Occupational Safety and Health Administration• National Telecommunications and Information AdministrationThe National Institutes of Health participates in some interagency working group activities, as well.FDA shares regulatory responsibilities for wireless phones with the Federal Communications Commission (FCC). All phones that are sold in the United States must comply with FCC safety guidelines that limit RF exposure. FCC relies on FDA and other health agencies for safety questions about wireless phones.FCC also regulates the base stations that the wireless phone networks rely upon. While these base stations operate at higher power than do the wireless phones themselves, the RF exposures that people get from these base stations are typically thousands of times lower than those
67they can get from wireless phones. Base stations are thus not the subject of the safety questions discussed in this document.3. What kinds of phones are the subject of this update?The term wireless phone refers here to hand-held wireless phones with built-in antennas, often called cell mobile or PCS phones. These types of wireless phones can expose the user to measurable radiofrequency energy (RF) because of the short distance between the phone and the user’s head. These RF exposures are limited by Federal Communications Commission safety guidelines that were developed with the advice of FDA and other federal health and safety agencies. When the phone is located at greater distances from the user, the exposure to RF is drastically lower because a person's RF exposure decreases rapidly with increasing distance from the source. The so-called cordless phones; which have a base unit connected to the telephone wiring in a house, typically operate at far lower power levels, and thus produce RF exposures far below the FCC safety limits.4. What are the results of the research done already?The research done thus far has produced conflicting results, and many studies have suffered from flaws in their research methods. Animal experiments investigating the effects of radiofrequency energy (RF) exposures characteristic of wireless phones have yielded conflicting results that often cannot be repeated in other laboratories. A few animal studies, however, have suggested that low levels of RF could accelerate the development of cancer in laboratory animals. However, many of the studies that showed increased tumor development used animals that had been genetically engineered or treated with cancer-causing chemicals so as to be pre-disposed to develop cancer in the absence of RF exposure. Other studies exposed the animals to RF for up to 22 hours per day. These conditions are not similar to the conditions under which people use wireless phones, so we don’t know with certainty what the results of such studies mean for human health.Three large epidemiology studies have been published since December 2000. Between them, the studies investigated any possible association between the use of wireless phones and primary brain cancer, glioma, meningioma, or acoustic neuroma, tumors of the brain or salivary gland, leukemia, or other cancers. None of the studies demonstrated the
68existence of any harmful health effects from wireless phone RF exposures. However, none of the studies can answer questions about long-term exposures, since the average period of phone use in these studies was around three years.5. What research is needed to decide whether RF exposure from wireless phones poses a health risk?A combination of laboratory studies and epidemiological studies of people actually using wireless phones would provide some of the data that are needed. Lifetime animal exposure studies could be completed in a few years. However, very large numbers of animals would be needed to provide reliable proof of a cancer promoting effect if one exists. Epidemiological studies can provide data that is directly applicable to human populations, but 10 or more years follow-up may be needed to provide answers about some health effects, such as cancer. This is because the interval between the time of exposure to a cancer-causing agent and the time tumors develop - if they do - may be many, many years. The interpretation of epidemiological studies is hampered by difficulties in measuring actual RF exposure during day-to-day use of wireless phones. Many factors affect this measurement, such as the angle at which the phone is held, or which model of phone is used.6. What is FDA doing to find out more about the possible health effects of wireless phone RF?FDA is working with the U.S. National Toxicology Program and with groups of investigators around the world to ensure that high priority animal studies are conducted to address important questions about the effects of exposure to radiofrequency energy (RF). FDA has been a leading participant in the World Health Organization International Electromagnetic Fields (EMF) Project since its inception in 1996. An influential result of this work has been the development of a detailed agenda of research needs that has driven the establishment of new research programs around the world. The Project has also helped develop a series of public information documents on EMF issues.FDA and the Cellular Telecommunications & Internet Association (CTIA) have a formal Cooperative Research and Development Agreement (CRADA) to do research on wireless phone safety. FDA provides the scientific oversight, obtaining input from experts in government,
69industry, and academic organizations. CTIA-funded research is conducted through contracts to independent investigators. The initial research will include both laboratory studies and studies of wireless phone users. The CRADA will also include a broad assessment of additional research needs in the context of the latest research developments around the world.7. How can I find out how much radiofrequency energy exposure I can get by using my wireless phone?All phones sold in the United States must comply with Federal Communications Commission (FCC) guidelines that limit radiofrequency energy (RF) exposures. FCC established these guidelines in consultation with FDA and the other federal health and safety agencies. The FCC limit for RF exposure from wireless telephones is set at a Specific Absorption Rate (SAR) of 1.6 watts per kilogram (1.6 W/kg). The FCC limit is consistent with the safety standards developed by the Institute of Electrical and Electronic Engineering (IEEE) and the National Council on Radiation Protection and Measurement. The exposure limit takes into consideration the body’s ability to remove heat from the tissues that absorb energy from the wireless phone and is set well below levels known to have effects.Manufacturers of wireless phones must report the RF exposure level for each model of phone to the FCC. The FCC website (http://www.fcc.gov/oet/rfsafety) gives directions for locating the FCC identification number on your phone so you can find your phone’s RF exposure level in the online listing.8. What has FDA done to measure the radiofrequency energy coming from wireless phones?The Institute of Electrical and Electronic Engineers (IEEE) is developing a technical standard for measuring the radiofrequency energy (RF) exposure from wireless phones and other wireless handsets with the participation and leadership of FDA scientists and engineers. The standard, Recommended Practice for Determining the Spatial-Peak Specific Absorption Rate (SAR) in the Human Body Due to Wireless Communications Devices: Experimental Techniques, sets forth the first consistent test methodology for measuring the rate at which RF is deposited in the heads of wireless phone users. The test method uses a
70tissue-simulating model of the human head. Standardized SAR test methodology is expected to greatly improve the consistency of measurements made at different laboratories on the same phone. SAR is the measurement of the amount of energy absorbed in tissue, either by the whole body or a small part of the body. It is measured in watts/kg (or milliwatts/g) of matter. This measurement is used to determine whether a wireless phone complies with safety guidelines.9. What steps can I take to reduce my exposure to radiofrequency energy from my wireless phone?If there is a risk from these products--and at this point we do not know that there is--it is probably very small. But if you are concerned about avoiding even potential risks, you can take a few simple steps to minimize your exposure to radiofrequency energy (RF). Since time is a key factor in how much exposure a person receives, reducing the amount of time spent using a wireless phone will reduce RF exposure.If you must conduct extended conversations by wireless phone every day, you could place more distance between your body and the source of the RF, since the exposure level drops off dramatically with distance. For example, you could use a headset and carry the wireless phone away from your body or use a wireless phone connected to a remote antenna. Again, the scientific data do not demonstrate that wireless phones are harmful. But if you are concerned about the RF exposure from these products, you can use measures like those described above to reduce your RF exposure from wireless phone use.10. What about children using wireless phones?The scientific evidence does not show a danger to users of wireless phones, including children and teenagers. If you want to take steps to lower exposure to radiofrequency energy (RF), the measures described above would apply to children and teenagers using wireless phones. Reducing the time of wireless phone use and increasing the distance between the user and the RF source will reduce RF exposure.Some groups sponsored by other national governments have advised that children be discouraged from using wireless phones at all. For example, the government in the United Kingdom distributed leaflets containing such a recommendation in December 2000. They noted that no evidence exists that using a wireless phone causes brain tumors or other ill
71effects. Their recommendation to limit wireless phone use by children was strictly precautionary; it was not based on scientific evidence that any health hazard exists.11. What about wireless phone interference with medical equipment?Radiofrequency energy (RF) from wireless phones can interact with some electronic devices. For this reason, FDA helped develop a detailed test method to measure electromagnetic interference (EMI) of implanted cardiac pacemakers and defibrillators from wireless telephones. This test method is now part of a standard sponsored by the Association for the Advancement of Medical instrumentation (AAMI). The final draft, a joint effort by FDA, medical device manufacturers, and many other groups, was completed in late 2000. This standard will allow manufacturers to ensure that cardiac pacemakers and defibrillators are safe from wireless phone EMI. FDA has tested hearing aids for interference from handheld wireless phones and helped develop a voluntary standard sponsored by the Institute of Electrical and Electronic Engineers (IEEE). This standard specifies test methods and performance requirements for hearing aids and wireless phones so that no interference occurs when a person uses a compatible phone and a accompanied hearing aid at the same time. This standard was approved by the IEEE in 2000.FDA continues to monitor the use of wireless phones for possible interactions with other medical devices. Should harmful interference be found to occur, FDA will conduct testing to assess the interference and work to resolve the problem.12. Where can I find additional information?For additional information, please refer to the following resources:FDA web page on wireless phoneshttp://www.fda.gov/cdrh/phones/index.htmlFederal Communications Commission (FCC) RF Safety Programhttp://www.fcc.gov/oet/rfsafetyInternational Commission on Non-Ionizing Radiation Protectionhttp://www.icnirp.de
72World Health Organization (WHO) International EMF Projecthttp://www.who.int/emfNational Radiological Protection Board (UK)http://www.nrpb.org.uk/July 18, 2001 For updates: http://www.fda.gov/cdrh/phones

Navigation menu