Microsoft RH-66 Tri-Mode Dual Band PCS Phone User Manual FCC DRAFT Nokia 2115 and Nokia 2115i User Guide

Microsoft Mobile Oy Tri-Mode Dual Band PCS Phone FCC DRAFT Nokia 2115 and Nokia 2115i User Guide

Manual

3Nokia 2115 and Nokia 2115i User Guide
4LEGAL INFORMATIONThe wireless device described in this guide is approved for use in CDMA 800 and 1900 networks.Part No. 9237536, Issue No. 1Copyright © 2004 Nokia. All rights reserved.Nokia, Nokia Connecting People, Nokia 2115, Nokia 2115i, Xpress-on, Pop-Port, and the Nokia Original Enhancements logos are trademarks or registered trademarks of Nokia Corporation. Other company and product names mentioned herein may be trademarks or trade names of their respective owners.US Patent No 5818437 and other pending patents. T9 text input software Copyright ©1999-2004. Tegic Communications, Inc. All rights reserved.Includes RSA BSAFE cryptographic or security protocol software from RSA Security.The information contained in this user guide was written for the Nokia 2115 and the Nokia 2115i products. Nokia operates a policy of ongoing development. Nokia reserves the right to make changes to any of the products described in this document without prior notice.UNDER NO CIRCUMSTANCES SHALL NOKIA BE RESPONSIBLE FOR ANY LOSS OF DATA OR INCOME OR ANY SPECIAL, INCIDENTAL, AND CONSEQUENTIAL OR INDIRECT DAMAGES HOWSOEVER CAUSED. THE CONTENTS OF THIS DOCUMENT ARE PROVIDED “AS IS.” EXCEPT AS REQUIRED BY APPLICABLE LAW, NO WARRANTIES OF ANY KIND, EITHER EXPRESS OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE, ARE MADE IN RELATION TO THE ACCURACY AND RELIABILITY OR CONTENTS OF THIS DOCUMENT. NOKIA RESERVES THE RIGHT TO REVISE THIS DOCUMENT OR WITHDRAW IT AT ANY TIME WITHOUT PRIOR NOTICE.EXPORT CONTROLSThis device may contain commodities, technology, or software subject to export laws and regulations from the U.S. and other countries. Diversion contrary to law is prohibited.FCC/INDUSTRY CANADA NOTICEYour phone may cause TV or radio interference (for example, when using a telephone in close proximity to receiving equipment). The FCC or Industry Canada can require you to stop using your telephone if such interference cannot be eliminated. If you require assistance, contact your local service facility. This device complies with part 15 of the FCC rules. Operation is subject to the condition that this device does not cause harmful interference.
Contents5ContentsFor your safety...............................................................................................  7Welcome..........................................................................................................  91. Device at a glance.................................................................................. 122. Set up your phone.................................................................................. 163. Text entry ................................................................................................. 244. Contacts .................................................................................................. 275. Messages ................................................................................................. 366. Call log...................................................................................................... 487. Settings .................................................................................................... 528. Organizer .................................................................................................. 689. Games ....................................................................................................... 7610.Minibrowser .......................................................................................... 7711.PC Connectivity..................................................................................... 7912.Enhancements ....................................................................................... 8013.Battery information ............................................................................. 82Care and maintenance .............................................................................. 85Additional safety information................................................................. 86Nokia one-year limited warranty........................................................... 91Index............................................................................................................  107
Contents6
For your safety7For your safetyRead these simple guidelines. Not following them may be dangerous or illegal. Read the complete user guide for further information.SWITCH ON SAFELYDo not switch the device on when wireless phone use is prohibited or when it may cause interference or danger.ROAD SAFETY COMES FIRSTObey all local laws. Always keep your hands free to operate the vehicle while driving. Your first consideration while driving should be road safety.INTERFERENCEAll wireless devices may be susceptible to interference, which could affect performance.SWITCH OFF IN HOSPITALSFollow any restrictions. Switch the device off near medical equipment.SWITCH OFF IN AIRCRAFTFollow any restrictions. Wireless devices can cause interference in aircraft.SWITCH OFF WHEN REFUELINGDo not use the phone at a refueling point. Do not use near fuel or chemicals.SWITCH OFF NEAR BLASTINGFollow any restrictions. Do not use the device where blasting is in progress.USE SENSIBLYUse only in the normal position as explained in the product documentation. Don't touch the antenna unnecessarily.QUALIFIED SERVICEOnly qualified personnel may install or repair this product.ENHANCEMENTS AND BATTERIESUse only approved enhancements and batteries. Do not connect incompatible products.
For your safety8WATER-RESISTANCEYour device is not water-resistant. Keep it dry.BACKUP COPIESRemember to make backup copies or keep a written record of all important information stored in your device.CONNECTING TO OTHER DEVICESWhen connecting to any other device, read its user guide for detailed safety instructions. Do not connect incompatible products. EMERGENCY CALLSEnsure the device is switched on and in service. Press End as many times as needed to clear the display and return to the main screen. Key in the emergency number, then press Call. Give your location. Do not end the call until given permission to do so.
Welcome9WelcomeCongratulations on your purchase of the Nokia 2115 or Nokia 2115i mobile device. Your device provides many functions which are practical for daily use, such as a hands-free loudspeaker, alarm clock, calculator, calendar, and more. To personalize your device, you can set your favorite ring tones and select an Xpress-onTM color cover. ■About your deviceThe wireless device described in this guide is approved for use on the CDMA 800 or 1900 networks. Contact your service provider for more information about networks.When using the features in this device, obey all laws and respect privacy and legitimate rights of others.Warning: To use any features in this device, other than the alarm clock, the phone must be switched on. Do not switch the device on when wireless phone use may cause interference or danger.■Network ServicesTo use the device you must have service from a wireless service provider. Many of the features in this device depend on features in the wireless network to function. These Network Services may not be available on all networks or you may have to make specific arrangements with your service provider before you can utilize Network Services. Your service provider may need to give you additional instructions for their use and explain what charges will apply. Some networks may have limitations that affect how you can use network services. For instance, some networks may not support all language-dependent characters and services. See "Network services features," page 65.Your service provider may have requested that certain features be disabled or not activated in your device. If so, they will not appear in your device menu. Contact your service provider for more information.■Shared memoryThe following features in this device may share memory: contacts, text messages, ring tones, calendar, and games. Use of one or more of these features may reduce
Welcome10the memory available for the remaining features sharing memory. Your device may display a message that the memory is full when you try to use a shared memory feature. In this case, delete some of the information or entries stored in the shared memory features before continuing. Some of the features, such as messages and ring tones may have a certain amount of memory specially allotted to them in addition to the memory shared with other features.■Register your deviceMake sure to register your device at www.warranty.nokiausa.com or call 1-888-NOKIA-2U (1-888-665-4228) so that we can serve your needs better if you should need to call a customer center or to have your phone repaired.■Get helpFind your device labelIf you need help, Nokia Customer Care is available for assistance. Before calling, we recommend that you write down the electronic serial number (ESN) and have it available.The ESN is found on the type label, which is located beneath the battery on the back of the device.Contact NokiaPlease have your product with you when contacting either of the following numbers:Please have your product with you when contacting either of the numbers below:Nokia Customer Care Center, USANokia Inc.7725 Woodland Center Boulevard, Suite #150Tampa, Florida 33614Tel: 1-888-NOKIA-2U (1-888-665-4228)Fax: 1-813-249-9619TTY/TDD users: 1-800-24-NOKIA (1-800-246-6542)
Welcome11Customer Care Center, MexicoNokia Mexico, S.A. de C.V.Paseo de los Tamarindos 400-A Piso 16Col. Bosques de las LomasC.P. 05120Mexico D.F., MexicoTel: (55) 261-7200Fax: (55)261-7299Customer Care Center, ArgentinaAzopardo 1071C1107ADQ Buenos AiresArgentinaTel: (11) 4307-1427Fax: (11) 4362-8795Customer Care Center, CanadaNokia Products Ltd.601 Westney Road SouthAjax, Ontario L1S 4N7Tel: 1-888-22-NOKIA (1-888-226-6542)Fax: 1-905-619-4360UpdatesFrom time to time, Nokia updates this guide to reflect changes. The latest version may be available at www.nokiausa.com. An interactive tutorial for this product may be available at the web site www.nokiahowto.com.Accessibility solutionsNokia is committed to making mobile devices easy to use for all individuals, including those with disabilities. For more information visit the web site at www.nokiaaccessibility.com.
Device at a glance121. Device at a glancePower key (1) Microphone (7)Earpiece (2) Charger port (8)Right selection key (3) Scroll up and down key (9)End key (4) Call key (10)Keypad (5) Left selection key (11)Connection port (6) Screen (12)
Device at a glance13■The start screenThe start screen is home base and indicates your device is in idle mode.Signal strength (1)—A higher bar indicates a stronger network signal.Battery level (2)—A higher bar indicates more power in the battery.Menu (3)—Press the Left selection key to select this option.Contacts (4)—Press the Right selection key to select this option.■Quick keysAt the start screen, scroll up to activate the flashlight, or scroll down to go to the contacts list.■Indicators and iconsIcon Indicates...You have one or more text or picture messages. See "Read amessage," page 39.You have one or more voice messages. See "Voice messages,"page 43.You are making a call with the device. See "Make a call,"page 20.Your device keypad is locked. See "Keyguard," page 22.Your device is set to the Silent profile. See "Profiles,"page 52.The alarm clock is set to On. See "Alarm clock," page 68.
Device at a glance14■Get the most out of this guideThe following sections illustrate the various components of your device. Familiarize yourself with these sections to help you understand the instructions that follow. This guide uses certain terms for the steps that you are asked to perform:• Press means to press and release a key quickly. For example, press 7 means press the key on the keypad that is labeled with the number 7 and the letters pqrs.• Press and hold means to press and hold a key for 2–3 seconds, then release the key.• Selection keys are used to select menu options. To select an option, press the selection key below the menu item on the device screen. • Scroll keys are used to move up and down in the menus.• Press Call to place a call or to answer an incoming call.• Press End to end a call or press and hold to return to idle mode at the start screen.The countdown timer is running. See "Countdown timer,"page 73.The stopwatch timing is running in the background. See"Stopwatch," page 74.Integrated hands free is active.The timed profile is selected. See "Profiles," page 52.  or  An enhancement is connected to the device. or  Voice privacy encryption is active (or is not active) in thenetwork. or    Location info sharing is set to Emergency or On. See"Location info sharing," page 53.Device is roaming outside of your home network.Device is in an 1XRTT network. See "Network Services,"page 9.Icon Indicates...
Device at a glance15■Device menusDevice features are grouped according to function and are accessed through the main menus. Each main menu contains submenus and lists from which you can select or view items and customize your device features. You can access these menus and submenus by using the scroll method.Scroll method1. At the start screen, select Menu, and scroll through the main menu using the up and down scroll key.2. When you arrive at a menu, press Select (the Left Selection key) to enter a submenu. Select Connect to enter submenus for minibrowser.• Select Back from the submenu level to return to the previous menu.• Select Exit from the main menu level or press End to return to the start screen from any menu or submenu.ShortcutsYou can go directly to almost any menu or submenu, as well as activate most features by using a shortcut.At the start screen, select Menu; then within 3 seconds press the key or keys associated with the menu function you would like to view or activate. For example, to select the Meeting profile, select Menu 4-1-3-1 from the start screen (Menu > 4 Settings>1 Profiles > 3 Meeting > 1 Activate). After a brief pause, the Meeting profile is activated.In-phone helpMany features have brief descriptions (help text) that can be viewed on the display. To view these descriptions, scroll to a feature, and wait for about 10 seconds. If needed, select More to view all of the description or Back to exit.In order to view the descriptions, you must first activate help text.1. At the start screen, select Menu > Settings > Phone settings > Help text activation.2. Select On to display help text or Off to turn this feature off.
Set up your phone162. Set up your phone■The antennaYour device has an internal antenna located towards the top of the device. Hold the device as you would any other telephone with the antenna area pointed up and over your shoulder. Note: As with any other radio transmitting device, do not touch the antenna unnecessarily when the device is switched on. Contact with the antenna affects call quality and may cause the device to operate at a higher power level than otherwise needed. Avoid contact with the antenna area when operating the device to optimize antenna performance and battery life. ■The batteryImportant: Always switch the device off and disconnect the charger before removing the battery.Before removing the cover, always switch off the power and disconnect the charger and any other device. Avoid touching electronic components while changing the covers. Always store and use the device with the covers attached.Remove the back cover1. With the back of the device facing you, push down on the button on the back of the device. 2. Slide the back cover toward the bottom of the device and remove.Remove the batteryAfter you have removed the back cover, insert your finger into the finger grip and lift the battery from its compartment.
Set up your phone17Replace the batteryAlways use original Nokia batteries. See "Battery information," page 82.1. Position the battery so the gold-colored contacts match up with those on the device.The battery label must face away from the device.2. Insert the battery, gold-colored contact end first, into the battery slot.3. Push down on the other end of the battery to snap the battery into place.Replace the back coverSlide the back cover toward the top of the device until you hear a click and see the back cover release button.Charge the battery1. Plug the charger transformer into a standard ac outlet.2. Insert the charger output plug into the round jack at the bottom end of the device.After a few seconds, the battery indicator in the display starts to scroll from bottom to top. If the battery is completely discharged, it may take a few minutes before the charging indicator appears on the display or any calls can be made.
Set up your phone18■Turn on or offTo turn your device on or off, press and hold the power key on top of the device for at least 3 seconds.■Connect the headsetA compatible headset may be included with your device or purchased separately as an enhancement. (See "Enhancements," page 80.)1. Plug the headset connector into the Pop-Port™ connector at the bottom end of your device.2. Position the headset on your ear.With the headset connected, you can make, answer, and end calls as usual.• Use the keypad to enter numbers.• Press Call to place a call.• Press End to end a call.■Change Xpress-on™ coversBefore removing the cover, always switch off the power and disconnect the charger and any other device. Avoid touching electronic components while changing the covers. Always store and use the device with the covers attached.Remove the back cover and the batterySee "Remove the back cover," page 16 and "Remove the battery," page 16 for instructions on removing the back cover and the battery.
Set up your phone19Remove the front coverGently pull the bottom of the front cover away from the rest of the device, and remove the front cover.Install the key mat and front cover1.  Remove the key mat from the old front cover. 2. Place the key mat into the new front cover.3. Press the front cover and key mat against the device, and snap the front cover into place.
Set up your phone20Replace the battery and back cover See "Replace the battery," page 17 and "Replace the back cover," page 17.Insert a photo in the back coverIf your device has a picture frame, you can insert one of your favorite photos in the back cover to personalize it. The size of the photo should not be larger than 45 mm x 25 mm. Trim the sides and corners at the bottom of the photo. Please note, if the photo is smaller than the window size, it may not stay in its position. The photo should be inserted with its image side facing the transparent window of the cover.■Make a callUse the keypad1. Enter the phone number (including the area code), and press Call.To delete a character to the left of the cursor, select Clear.2. Press End to end the call or to cancel the call attempt.Use the contacts listTo enter a number into the contacts list, at the start screen, select Contacts > Add new, and enter the name and phone number. See "Save an entry," page 28.1. At the start screen, scroll down to display the contents of your contacts list.2. Select a contact from the list.3. Press Call to make the call, or select Details to view details of the entry.Use the last dialed number1. At the start screen, press Call to display the last 20 numbers dialed. 2. Scroll to the number (or name) you wish to redial, and press Call.
Set up your phone21Make a conference callConference calling is a network service that allows you to take part in a conference call with two other participants.1. Make a call to the first participant.2. With the first participant on the line, select Options > New call.3. Enter the phone number of the second participant, or select Search to retrieve a number from the contacts list. 4. Select Flash.The first participant is put on hold.5. When the second participant picks up, press Call to connect the calls.6. To end the conference call, select Options > End all calls, or press End.■Answer callsAnswer or silence/declineSilence/Decline is a carrier-dependent feature.1. Press Call, or select Answer to answer the call.2. To mute the ringing tone, select Silence. If you do not answer the call, the call is eventually forwarded to voicemail.3. To dismiss and forward the call to voicemail (a carrier-dependent feature), select Dismiss after you have muted the ringing tone, or press End at any time.Answer a call with locked keypadTo answer a call with the keypad locked, press Call. During the call, all features function as normal. When you end or decline the call, the keypad automatically relocks. See "Keyguard," page 22.When the device is locked, calls may be possible to the official emergency number programmed into your device.
Set up your phone22Adjust the volume during a callTo increase or decrease the volume during a call, scroll up or down during the call. When adjusting the volume, a bar chart indicates the volume level.LoudspeakerYou can use the loudspeaker on your device during a call. Warning:  Do not hold the device near your ear when the loudspeaker is in use because the volume may be extremely loud.• To activate the loudspeaker while in a call, select Loudsp.• To deactivate the loudspeaker during a call, select Handset.The loudspeaker is deactivated automatically when a call (or a call attempt) ends or when certain enhancements are connected.Options during a callMany of the options that you can use during a call, are network services. Check with your wireless service provider for more information.Select Options during a call to display a list of options available during a call, then select an option.■KeyguardWith keyguard, you can lock the keypad to prevent keys from being pressed accidentally and to prevent accidental calls. If the keypad is locked, it unlocks when you receive a call. After the call, the lock automatically reactivates.When keyguard is on, calls may be possible to the official emergency number programmed into your device.To lock the keypad, select Menu and press * within 2 seconds.To unlock the keypad, select Unlock and press * within 2 seconds.
Set up your phone23■FlashlightYour device has a built-in flashlight that you can activate when the device is in the standby mode or when there is a call in progress. To activate the flashlight, scroll up. The light stays on until you release the scroll key.Scroll up twice in quick succession for the flashlight to stay on continually. Press scroll up again to turn the flashlight off.You can also use the flashlight to alert you to an incoming call. For more information, see "Personalize a profile," page 52.
Text entry243. Text entryYou can use two methods for entering text and numbers:• Standard mode is the only way to enter text into the contacts list, and to rename caller groups.• Predictive text is a quick and easy method for writing messages and creating a calendar note.■Standard modeText (Abc)• Press a key once to insert the first letter on the key, twice for the second letter, etc. If you pause briefly, the last letter in the display is accepted and your device awaits the next entry.• Press 0 to enter a space thereby accepting a completed word.• Press 1 to enter a period (.).• Press * to display special characters. See more about special characters on the following pages.Numbers (123)To switch to 123 mode from Abc mode, press and hold # at any message entry screen until the icon in the upper left corner of the display switches from Abc to 123 (or vice versa).• Select Clear to backspace the cursor and delete a character.• Select and hold Clear to backspace continuously and delete characters.Punctuation and special charactersWhile at any text entry screen, press * to display special characters (press and hold * if predictive text is on). To navigate through the list of special characters, use the scroll key. Once a character is highlighted, select Insert to insert the character into your message.
Text entry25■Predictive text inputPredictive text input allows you to write messages quickly using your keypad and the built-in dictionary. It is much faster than the standard mode method, because for each letter, you only press the corresponding key on your keypad once.Activate or deactivate1. At any text entry screen, select Options > Predictive text.2. Select the language of your choice.The language setting affects the time and date formats of the clock, alarm clock, and calendar.Text entryThe following illustration simulates your display each time a key is pressed. For example, to write Nokia with predictive text on and with the English dictionary selected, press each of the following keys once: 6  6  5  4 2 •Press 0 to enter a space and begin writing the next word.• If a displayed word is not correct, press * to see other matches. To return to the previous word in the list of matches, select Previous.•If ? appears after a word, select Spell to add the word to the dictionary.•Press 1 to insert a period into your message.•Press and hold * to display special characters. Press * again to cycle through all available characters.•Press # to switch predictive text on or off and to use predictive text in various modes. As you press #, the following icons (not the descriptions) appear in the upper left of the display screen: Uppercase text: standard mode is on. Lowercase text: standard mode is on.
Text entry26 Sentence case text: standard mode is on. Sentence case text: predictive text is on. Lowercase text: predictive text is on.
Contacts274. Contacts The contacts list can hold up to 250 contacts, with multiple numbers and text notes for each contact. The amount of numbers and text entries that you can save may vary, depending on length and the total number of entries in the contacts list.■Contacts optionsYou can access contacts options in one of two ways: • At the start screen, select Contacts.• At the start screen, select Menu > Contacts.In this chapter, to access contacts options, select Contacts.■Search1. At the start screen, select Contacts > Search. 2. Type in the first character of the contact name and highlight the contact you wish to view. 3. Select Details > Options and the action you want to apply to the contact.■Add new contactsSave a name and number1. At the start screen, enter the phone number you wish to save.2. Select Options > Save.3. Enter the name, and select OK.Save (only) a number1. At the start screen, enter the phone number you wish to save.2. Select and hold Options.
Contacts28Save an entry1. At the start screen, select Contacts > Add new.2. Enter the name, and select OK.3. Enter the phone number, and select OK > Done.Save numbers, text items, and details You can save different types of phone numbers and short text items per name to the contacts list. The first number you save for any entry is automatically set as the default, but the default number can always be changed. You can save details such as addresses and notes as contact information.1. At the start screen, scroll down to display a list of entries in your contacts list. 2. Scroll to the entry to which you wish to add a phone number, text item, or other details.3. Select Details > Options > Add number or Add detail.4. Select General, Mobile, Home, Work, or Fax type when adding a number; or select E-mail, Web address, Street addr., or Note when adding details.5. Enter the number or text for the type you have selected, and select OK.6. To change the type, select Change type in the options list.To change the default number for the contact entry:1. At the start screen, scroll down to the entry you wish to change, and select Details. 2. Scroll to the number you wish to set as default, and select Options > As primary no.■Edit contact name1. Highlight the phone number of the contact and select Options.2. Select Edit name and enter your changes; then select OK.■Delete contacts list entries1. At the start screen, select Contacts > Delete.2. To delete individual entries, select One by one.
Contacts293. Scroll to the entry you wish to delete, and select Delete > OK to confirm.4. To delete the entire contents of your contacts list, select Delete all > OK.5. Enter the lock code, and select OK. See "Security settings," page 62.■Add number list entriesAdd number allows you to tag each phone number entry with a phone type.1. At the start screen, select Contacts > Add number. 2. Highlight a contact from the list and select Add.3. Select the tag as General, Mobile, Home, Work, or Fax and enter the number. ■SettingsSettings allows you to determine how your phone numbers will be viewed and how much memory remains in the contacts list.At the start screen, select Contacts > Settings and one of the following:Scrolling view—Specify how names and numbers are viewed in Contacts list.Memory status—Determine the amount of space available in Contacts list.■1-touch dialingYou can associate any entry in the contacts list with a key from 2–9. To dial those entries, press and hold the assigned key. 1-touch dialing must be turned on to use this method.Press the assigned key and Call to 1-touch dial at any time.Assign a key to 1-touch dialing1. At the start screen, select Contacts > 1-touch dialing.2. Select any empty slot and Assign.3. Enter the number (including the area code), and select OK; or select Search to retrieve a number from the contacts list.4. Enter the contact name for the number, and select OK. If 1-touch dialing is off, the device displays a prompt asking if you would like to turn 1-touch dialing on.
Contacts305. Select Yes to activate 1-touch dialing. Change 1-touch dialing numbers1. At the start screen, select Contacts > 1-touch dialing.2. Select the 1-touch dialing entry you wish to change and Options > Change.3. Enter the new number and select OK; or select Search to view the contacts list and select a new number. 4. Enter a name for the entry, and select OK. Delete 1-touch dialing numbers1. At the start screen, select Contacts > 1-touch dialing.2. Select the 1-touch dialing location you wish to delete. 3. Select Options > Delete > OK to delete the key assignment.■Edit contacts list entries1. At the start screen, scroll down to display the contents of your contacts list.2. Select the entry you would like to edit and Details.Edit phone number1. Highlight the phone number you would like to edit, and select Options.2. Select one of the following options and select OK.Add voice tag—Add a voice tag to the contact.Edit number—Edit an existing phone number of the contact.Delete number—Delete a phone number from the contact.Use number—Display the phone number on the start screen, ready to be called.View—View the details of the contact.Change type—Change the number type to General, Mobile, Home, Work, or Fax. As primary no.—Change the default number of the contact.
Contacts31Add number—Add a number to the contact.Add detail—Add an address or note to the contact.Caller groups—Add the contact to an existing caller group.Custom tone—Add a custom ring tone to the contact.Send bus. card—Send the contact as a business card to another phone.Send message—Create and send a message to the contact.1-touch dialing—Add the contact to your 1-touch dialing list.Edit name—Edit the name of the contact.View name—View the name of the contact.Delete—Delete the entire contact entry from your contacts list.E-mail address entry1. Highlight the e-mail address entry you would like to send or update, and select Options.2. Select one of the following options and OK.Send e-mail—Send an e-mail.Edit detail—Edit existing details of e-mail.Delete detail—Delete existing e-mail.View—View the details of the e-mail contact.Change type—Change the e-mail type to Web address, Street address:, or Note.Add number—Add a number to the entry.Add detail—Add an address or note to the entry.Caller groups—Add the e-mail to an existing caller group.Custom tone—Add a custom ring tone to the contact.Send bus. card—Send the contact a business card.Edit name—Edit the name of the contact.View name—View the name of the contact.Delete—Delete the entire e-mail entry from your contacts list.
Contacts32Edit other text items1. Highlight the address entry you would like to edit, and select Options.2. Select the option you wish to perform and OK.■Voice tagsVoice tags allow you to dial a contact by speaking. You can also playback, change, or delete voice tags.Voice dialingYou can dial up to 25 stored numbers using voice dialing. Before using voice tags, note the following:• Voice tags are not language dependent. They are dependent on the speaker’s voice.• You must say the name exactly as you said it when you recorded it.• Voice tags are sensitive to background noise. Record voice tags and use them in a quiet environment.• Very short names are not accepted. Use long names, and avoid similar names for different numbers.Using voice tags may be difficult in a noisy environment or during an emergency, so you should not rely solely upon voice dialing in all circumstances.Assign a voice tag to an entryBefore you can use voice dialing, you must first assign a voice tag to the number.1. At the start screen, use scroll down to enter the contacts list.2. Highlight the contact you want to assign a voice tag, and select Details > Options > Add voice tag.3. Select Start; then speak clearly into the microphone.Do not select Quit unless you want to cancel the recording.The device automatically stops recording, saves, and replays the voice tag. appears next to the phone numbers that have voice tags assigned.If recording is not successful, your device displays Voice system error. Select Options > Add voice tag, and repeat Step 3.
Contacts33Dial a number1. Select and hold Contacts.2. When you hear several beeps and Please speak now appears, release the key.3. Pronounce the voice tag clearly into the microphone.When the device finds the voice tag, Found: appears, and the device automatically dials the number. If the device does not locate a number or recognize the voice tag, No match found appears. Voice tag optionsAfter you have associated a voice tag to a contact, you can choose one of the following options:Play back1. Select Menu > Contacts > Voice tags.2. Scroll to the name with the voice tag you want to hear.3. Select Options > Playback.Modify1. Select Menu > Contacts > Voice tags.2. Scroll to the name with the voice tag you want to change.3. Select Options > Change.4. Select Start, then speak clearly into the microphone. The device repeats your voice tag, and Voice tag saved appears.Delete1. Select Menu > Contacts > Voice tags.2. Scroll to the name with the voice tag you want to erase.3. Select Options >Delete. Delete voice tag? appears.4. Select OK to erase the voice tag.■My numberMy number allows you to display your own phone number. Select Contacts > My number.
Contacts34■Caller groupsCaller groups allows you to organize your contact information into groups. You can add contacts list entries to any of five caller groups, and assign a unique ringing tone or graphic to that group. This enables you to identify callers from the group by their unique ringing tone or graphic.Set up a group1. At the start screen, scroll down to display a list of entries in your contacts list.2. Select a name you would like to add to a caller group.3. Select Details > Options > Caller groups.4. Select the caller group to which you would like to add the name.Caller group options1. At the start screen, select Contacts > Caller groups > Family, VIP, Friends, Business, or Other.2. Scroll to highlight a group, and select one of the following caller group options and follow the directions displayed:Rename group—Rename the group to your preference.Group ringing tone—Set the ringing tone for the group.Group logo—Turn the graphic for the caller group on or off.Group members—Add or remove members from the caller group.■Send and receive contacts (business cards)You can send and receive an entry in your contacts list using a text message if supported by your wireless provider.Send a business cardYou can send a business card as a text message to a compatible phone or other handheld device.1. At the start screen, scroll down to display the contents of your contacts list. 2. Highlight an entry from the contacts list that you wish to send, and select Details > Options > Send bus. card.
Contacts353. To send the business card as a message, select Via text msg. > Primary no. or All details (only if contact has more than one phone number).4. Enter the number for your recipient, or select Search to retrieve a number from your contacts list.5. Select OK. The business card is sent.
Messages365. Messages If you have subscribed to a messaging service through your wireless provider, you can send and receive messages to compatible devices that also subscribe to a compatible message service. You may also be able to send and receive picture messages and e-mail messages.Important: Exercise caution opening messages. Messages may contain malicious software or otherwise be harmful to your device or PC. Do not open any attachment if you are not sure of the trustworthiness of the sender.When sending messages, your device may display Message sent. This is an indication that the message has been sent by your device to the message center number programmed into your device. This is not an indication that the message has been received at the intended destination. For more details about messaging services, check with your service provider.■Text messagesAt the start screen, select Menu > Messages > Text messages  and select from the following: Create message—Allows you to create and send messages. Create message is activated by the service provider.Inbox—Allows you to check for received messages.Sent items—Allows you to check for sent messages.Archive—Allows you to save messages in an archive.Templates—Includes a selection of templates for creating messages.My folders—Allows you to create and name your personal folders.Distribution lists—Allows you to define a group of up to 10 recipients to which messages can be addressed.Delete messages—Allows you to delete messages from a selected folder or all folders.Message settings—Includes options for changing settings for reading, writing and sending messages.
Messages37Write and send1. At the start screen, select Menu > Messages > Text messages > Create message. 2. Select Add number to add the recipient’s phone number, Add e-mail to add the e-mail address, or Add list to add a distribution list. You can also select Search to retrieve a number or e-mail address from your contacts list, and OK.3. Select Options and repeat step 2 to add more recipients, then select OK.4. Select Options > Edit message.5. Compose a message using the keypad, and select Options > Send. TemplatesTemplates are short, prewritten messages that can be recalled and inserted into new text messages when you are short on time.1. At the start screen, select Menu > Messages > Text messages > Create message > Edit message > Options > Use template.2. Select one of the available templates.3. Enter the text into your new message, and select Options > Send > Add number, Add e-mail, or Add list.4. Enter your recipient’s phone number; or select Search to retrieve a number from your contacts list and OK.5. Select Options > Send.Options when creating a messageWhen you send a text message, depending on the mode of text input you are using and the features supported by your wireless service provider, some or all of the following options are available:Preview—Previews the inserted message before sending. Select Back to return to the list of options.Send—Send the message to one recipient.List recipients—Send the message to more than one recipient.Settings—Set the priority of the message.Save message—Select Sent items to save the message in the sent items folder; select Templates to save the message as one of your predefined templates; select Archive to save the message in your archive, or to a folder you created.
Messages38Clear text—Erase the text clipboard.Exit editor—Save the message to your sent items folder automatically, and leave the message editor.Insert contact—Insert a name from your contacts list into your message.Insert number—Insert a phone number or find a phone number in the contacts list.Use template—Insert a predefined template into your message.Insert smiley—Insert the smiley face of your choice into your message.Insert picture—Insert a picture of your choice into the message.Change picture—Takes you back to the picture list. Scroll to highlight a new picture, select View > Insert to replace the previous picture in your message.Delete picture—Select OK to delete the picture from your message, or select Back to return to the list of options.Insert word or Edit word—Enter or edit the text of a new word that might not appear in the predictive text dictionary. This displays only when Predictive text is set to On.Predictive text—Choose a predictive text language, and turn predictive text on or off.Insert symbol—Insert a special character into your message. This displays only when Predictive text is set to On.Matches—View matching words found in the dictionary for the word you want to use.Create a distribution list1. At the start screen, select Menu > Messages > Text messages > Distribution lists > Options > Add list.2. Enter a name for the list, and select OK.3. To add contacts to this list, select Options > Add contact.4. Add the contacts one by one to this list.Send a message to a distribution list1. At the start screen, select Menu > Messages > Text messages > Create message.
Messages392. Select Add list, scroll to a distribution list, and select OK.3. Select Options > Edit message or Edit text.4. Compose a message using the keypad, and select Options > Send. 5. Select Options > Send.Your message is then sent to each of the recipients in the list.Read a messageWhen you receive a message, a notification message displays and   is displayed. When you have unopened messages in your inbox,   is shown in the upper left corner of the start screen as a reminder.1. Select Show to read the message, or Exit to dismiss notification.2. Scroll up or down to view the whole message if necessary. Options while reading a messageWhen you read a text message, the following options are available:Delete—Discard the message.Reply—Reply to the message. Create the message, and select Options > Send. The sender’s phone number or e-mail is used as the defaultUse number—Select Save, Add to contact, Send message, or Call.Save—Save the message to a folder.Forward—Forward the message to another phone number.Rename—Edit the title of the message.Reply to a messageWhen you receive a message, a notification message   is displayed.1. Select Show > Options > Reply.2. Select a reply option; then compose your reply using the keypad.3. Select Options > Send. To reply to a previously received message:1. At the start screen, select Menu > Messages > Text messages > Inbox and select a message. 2. Select Options > Reply to respond.
Messages40Change sending options1. At the start screen, select Menu > Messages > Text messages > Message settings > Sending options.2. Select the setting you wish to change:Priority—Select the priority of the note as Normal or Urgent.Delivery note—A note is sent to you confirming delivery of the message. Select On or Off.Send callback number—A callback number is sent to the recipient. Select Off or default phone number.Change message settings1. At the start screen, select Menu > Messages > Text messages > Message settings > Other settings.2. Select the setting you wish to change:Message font size—Select Small font or Large font.Message overwriting—Select Sent items only, Inbox only, S. items & Inbox, or Off. Save to Sent items as sending—Select Always save, Always prompt, or Off.When the message memory is full, your device cannot send or receive any new messages. However, you can set your device to automatically replace old messages in the Inbox and Sent items folders when new ones arrive.■Message foldersSave messages to foldersYou can save drafts of messages or received messages to an existing folder or to a folder that you have created.To save a draft of a message you are creating, select Options > Save message > Templates. To save a received message, select Options > Save message > Sent items, Templates, Archive, or a folder you have created.
Messages41Save the message to another folderWhile viewing a message, select Options > Save message and the destination folder. View saved messages1. At the start screen, select Menu > Messages > Text messages.2. Select the folder containing the message you wish to view.3. When the folder opens, select the message you wish to view.Inbox folderMessages are automatically stored in the inbox after you read them, or if you select Back when notification is displayed on the start screen.Sent items folderMessages that you have sent and messages that you have created but have not sent are automatically stored in the sent items folder.When sending messages, set Save to Sent items as sending to Always save or Always prompt to ensure that your messages are saved. If Save to Sent items as sending is set to Off, sent messages are not stored in the sent items folder. To change the settings, select Menu > Messages > Text messages > Message settings > Other settings.Archive folderStore messages that have been read in the Archive folder.Templates folderPictures and prewritten templates are stored in the Templates folder. Preloaded templates can be edited and customized.My foldersTo keep your messages organized, create custom folders and save some of your messages there.
Messages42Add a folder1. At the start screen, select Menu > Messages > Text messages > My folders > Options > Add folder.2. Enter a name for the new folder, and select OK.Rename a folder1. At the start screen, select Menu > Messages > Text messages > My folders. Any folders that you have created are displayed.2.  Scroll to the folder you wish to rename, and select Options > Rename folder.3. Select and hold Clear to delete the existing entry. 4. Enter the new name for the folder, and select OK to confirm or Back to exit.Delete a folderOnly folders created in My folders can be deleted. The Inbox, Sent items, Archive, and Templates folders are protected. When you delete a folder, all messages in the folder are also deleted.1. At the start screen, select Menu > Messages > Text messages > My folders.2. Scroll to the folder you wish to remove, and select Options > Delete folder. 3. Select OK to delete or Back to exit.■Delete messagesIf your message memory is full and you have more messages waiting at the network,   blinks on the start screen. You can do the following:• Read some of the unread messages, and delete them.• Delete messages from some of your folders.A single messageTo delete a single message, you need to open it first.1. At the start screen, select Menu > Messages > Text messages.2. Select the folder containing the message you wish to delete.3. Select the message you wish to delete. 4. Select Options > Delete > OK to delete the message or Back to exit.
Messages43All messages in a folder1. At the start screen, select Menu > Messages > Text messages > Delete messages.2. Select the folder containing the messages you wish to delete.All—Deletes all messages in all of the folders.All read—Deletes any messages that have been read in all of the folders.All unread—Deletes any messages that have not been read in all of the folders.Inbox—Deletes all messages from the Inbox folder.Sent items—Deletes all messages from the Sent items folder.Archive—Deletes all messages from the Archive folder.User defined folders—All user defined folders that the user has added under My folders are displayed at the end of the predefined folders.3. Select OK to empty the folder.■Voice messagesIf you subscribe to voice mail, your wireless provider will furnish you with a voice mailbox number. You need to save this number to your device to use voice mail. When you receive a voice message, your device displays a notification and may beep or vibrate. If you receive more than one message, your device shows the number of messages received.Save voice mailbox numberYour wireless provider may have already saved your voice mailbox number to your device. If so, the number will appear in the display in step 2. Select OK to leave the number unchanged.1. At the start screen, select Menu > Messages > Voice messages > Voice mailbox number.2. If the box is empty, enter the voice mailbox area code and number.3. Select OK.
Messages44Call and set up your voice mail1. When you have saved the voice mailbox number, press and hold 1. 2. When you connect to voice mail and the prerecorded greeting begins, follow the automated instructions to set up your voice mail.Listen to your voice messagesYou can dial your voice mailbox number in one of these ways:• Dial the number using the keypad.• Press and hold 1.• Select Listen if there is a notification message in the display.• At the start screen, select Menu > Messages > Voice messages > Listen to voice messages. When you connect and the prerecorded greeting begins, follow the automated instructions to listen to your voice messages.Automate voice mailYou can insert special characters called dialing codes into phone numbers such as voice mail, and save the number to a 1-touch dialing location. Dialing codes instruct the receiving system to pause, wait, bypass, or accept the numbers that follow them in the dialing string.Voice mail services vary by service provider. The following instructions are examples of common operations. Please check with your service provider for specific instructions for using your voice mail service.Voice mailbox number and process1. Write down your voice mailbox number.2. Call and check your voice mail as you normally would.3. Write down your step-by-step interaction with the recorded prompts. Remember that each voice mail service varies. Your steps may resemble the following:Dial 2145551212, pause 5 seconds, press 1, pause 2 seconds, press 1234 and *.
Messages45Be precise; you need this information to set up your voice mail with dialing codes.Dialing codesPress * repeatedly to cycle through dialing codes. When the desired code appears in the display, pause briefly and the code is inserted into the dialing string.The following dialing codes are available: Set up voice mail with dialing codes1. At the start screen, select Contacts > 1-touch dialing.2. Scroll to an empty 1-touch dialing slot, and select Assign.3. Enter your voice mailbox number, including the area code.4. Refer to dialing codes, and enter codes as necessary using the information that you saved from "Voice mailbox number and process," page 44.For example, if you pause for 5 seconds after connecting to voice mail, enter p twice after the voice mailbox number (for example, 2145551212pp).5. Enter any remaining pauses or other information that allows you to listen to your messages, and select OK.6. Enter a name (such as voice mail), and select OK.To dial and listen to your voice mail, press and hold the assigned 1-touch dialing key at the start screen.Dialing code Indicates...* Bypasses a set of instructions.+ Causes the International access code to be re-placed by +.p Pauses for 2.5 seconds before sending anynumbers that follow.w Waits for you to press Call before sending thenumbers or codes that follow.
Messages46■Picture messagesPicture messaging is a network service. If your wireless service provider supports this feature, your device comes with five preloaded pictures. You can, however, over-write any of the five pictures that come with your device. Pictures can be attached to a message and sent using text messaging to compatible devices or PCs. Picture messages behave the same as text messages, but pictures take up more space than text. Pictures are stored in the Templates folder at Menu > Messages >Text messages > Templates.Note:  Picture message function can be used only if it is supported by your network operator or service provider. Only compatible devices that offer picture message features can receive and display picture messages.Copyright protections may prevent some images, ringing tones, and other content from being copied, modified, transferred, or forwarded.Write and sendWhen a picture is added to a text message, the message converts to picture message. The message counter in the upper right of your display shows the characters available for you to type in.1. At the start screen, select Menu > Messages > Text messages > Create message > Edit message.2. Write a message using the keypad (or enter nothing if you choose to just send a picture), and select Options > Insert picture.3. Scroll down through the pictures, and select View.4. Select Insert to insert the picture into your message; otherwise select Back, scroll to another picture, and select View again.5. To send the picture message, select Options >Send.6. Select Add number.7. Enter the phone number for your recipient, or select Search to retrieve a number from the contacts list and OK.8. Select Options > Send.Note: Picture images are not saved in Sent items.Note: Pictures can only be received via SMS.
Messages47View a picture messageWhen you receive a picture message,   appears in the display.1. Select Show to view the picture message, or select Exit to move it to your inbox.2. If you have more than one picture message, select the message of your choice.When you have unopened picture messages in your inbox,   appears in the upper left corner of the start screen as a reminder.3. Scroll to view the whole picture if necessary. 4. Once you are finished, select Back to move the picture message to the Inbox or Options for other choices such as Reply or Forward.If you want to save the picture to your Templates folder for later use, select Options > Save picture. Enter a title for the picture, and select OK.If your templates folder is full of pictures, select the picture you want to replace.■Minibrowser messagesMinibrowser messaging is a network service. See "Network Services," page 9.If your wireless service provider supports this feature, you can check for e-mail messages using the minibrowser. At the start screen, select Menu > Messages > Minibrowser > Connect.For information on using the Minibrowser in your device to access web pages, see "Minibrowser," page 77.
Call log486. Call logCall log stores information about the last 20 missed, 20 received, or 20 dialed calls. It also adds the total duration of all calls. When the number of calls exceed the maximum, the most recent call replaces the oldest.Whether viewing missed, received, or dialed calls, the menu options are the same:Call time—Display the date and time of the call.Send message—Send a message to the number.View number—Display the number.Use number—Make a call using the number.Edit number—Edit the number and associate a name with the number.Save—Enter a name for the number and save it to your contacts list.Add to contact—Add the number to an existing entry in your contacts list, if the number is not associated with a name.Delete—Clear the number from memory.Call—Call the number.■View missed callsMissed calls are calls that were either dismissed or never answered. The missed calls feature does not function when your device is switched off.1. If a missed call notification appears in the display, select List; otherwise, from the start screen, select Menu > Call log > Missed calls.2. When the phone number appears in the display, select Options.3. Select an option.■View received callsReceived calls are calls that have been answered.1. At the start screen, select Menu > Call log > Received calls.2. Select a name or number and Options.3. Select an option.
Call log49■Dialed numbersDialed calls are previous numbers you have dialed from your device:1. At the start screen, press Call, or select Menu > Call log > Dialed numbers.2. Select a name or number and Options.3. Select an option.Call timesYou can make or receive calls to or from the same number and view the time each call occurred. Your clock must be set for this feature to work accurately.1. While viewing a missed, received, or dialed call, select Options > Call time.2. Scroll down to view the most recent call times from this number. 3. Select Back to return to the options list.■Delete call logsYou can delete any missed, received, or dialed calls from device memory.1. At the start screen, select Menu > Call log > Delete recent call lists.2. Select the call type you would like to clear: All, Missed, Received, or Dialed.■Duration of callsThe actual time invoiced for calls and services by your service provider may vary, depending on network features, rounding off for billing, taxes, and so forth.Last call At the start screen, select Menu > Call log > Call timers > Duration of last call for more information.Show call time on displayAt the start screen, select Menu > Call log > Call timers > Duration of last call > Details > Show call time on display, and set to On or Off.
Call log50Dialed callsAt the start screen, select Menu > Call log > Call timers >Duration of dialed calls > Details for more information.Received callsAt the start screen, select Menu > Call log > Call timers >Duration of received calls > Details for more information.All callsAt the start screen, select Menu > Call log > Call timers >Duration of all calls for more information.Life timerAt the start screen, select Menu > Call log > Call timers >Life timer.Some timers, including the life timer, may be reset during service or software upgrades.Clear timersAt the start screen, select Menu > Call log > Call timers >Clear timers, enter your lock code, and select OK.■Duration of data and fax callsData and fax calls are a network service. See "Network Services," page 9 for more information. If your wireless service provider supports this feature, you can view the size or duration of sent or received data and fax calls.The actual time invoiced for calls and services by your service provider may vary, depending on network features, rounding off for billing, taxes, and so forth.At the start screen, select Menu > Call log > Data/fax calls and scroll to one of the following options:Last sent data/fax—View the size (kB) of the last send data or fax call.Last received data/fax—View the size (kB) of the last received data or fax call.All sent data/fax—View the size (kB) of all sent data and fax calls.Duration of last data/fax call—View the duration time of the last data orfax call.
Call log51All received data/fax—View the size (kB) of all received data and fax calls.Duration of all data/fax calls—View the duration time of all calls.Clear all data/fax logs—Select OK > Yes to clear all data and fax registers. ■Duration of minibrowserMinibrowser is a network service and is a carrier dependent feature. See "Network Services," page 9. If your wireless service provider supports this feature, you can view the size or duration of sent or received data from the Minibrowser.The actual time invoiced for calls and services by your service provider may vary, depending on network features, rounding off for billing, taxes, and so forth.1. At the start screen, select Menu > Messages > Minibrowser messages.2. Scroll to one of the following options:Last sent browser data—View the size (kB) of the last send browser data.Last received browser data—View the size (kB) of the last received data.All sent browser data—View the size (kB) of all sent browser data.All received browser data—View the size (kB) of all received browser data.Last browser session—View the duration time of the last browser session.All browser sessions—View the duration time of all browser sessions.Clear all browser logs—Select OK > Yes to clear all browser registers.
Settings527. Settings Use this menu to set or change profiles, tone settings, call settings, phone settings, time and date settings,  enhancement settings, security settings, network settings, or to restore the factory settings.■ProfilesProfiles define how your device reacts when you receive a call or message, how your keypad sounds when you press a key, and more. Ringing options, keypad tones, and other settings for each of the available profiles can be left at their default setting, or customized to suit your needs. The following profiles are available: Normal, Silent, Meeting, Outdoor, and Pager.Profiles are also available for enhancements such as a headset and car kit. See "Enhancement settings," page 62.Activate1. At the start screen, select Menu >Settings > Profiles.2. Select the profile of your choice.3. Select Activate.Personalize a profileYou can personalize any of the profiles a variety of ways.1. At the start screen, select Menu >Settings > Profiles.2. Select the profile you wish to customize.3. Select Customize.4. Select the option you want to customize: Incoming call alert, Ringing tone, Ringing volume, Vibrating alert, Light alert, Message alert tone, Keypad tones, Warning tones, Alert for, or Profile name.You cannot rename the Normal profile.Select Alert for to set the phone to ring only upon calls from phone numbers that belong to a selected caller group. Scroll to the caller group you want or All calls, and select Mark or Unmark > Done. To set the phone to ring for every call, select All calls > Mark > Done.
Settings53Set a timed profileTimed profiles can be used to prevent missed calls. For example, you attend an event that requires your device be set to Silent before the event starts, but you forget to return it to Normal until long after the event. A timed profile can prevent missed calls by returning your device to the default profile at a time you specify.Timed profiles can be set up to 24 hours in advance.1. At the start screen, select Menu >Settings > Profiles.2. Select the profile you wish to activate and set for timed expiration.3. Select Timed.4. Enter the time for the profile to expire, and select OK. ■Tone settingsFrom this menu, you can adjust the ringing volume, keypad tones, and other tone settings for the currently active profile. You can also set the device to ring for calls from phone numbers that belong to a selected caller group. See "Personalize a profile," page 52.■Call settingsLocation info sharingLocation info sharing is only available for the Nokia 2115i phone. Location info sharing is a network service. See "Network Services," page 9.If your wireless service provider supports this feature, location info sharing allows the phone to share position information over the network. For calls to emergency numbers, this position information may be used by the emergency operator to determine the position of the phone. The functionality and accuracy of this feature is dependent on the network, satellite systems, and the agency receiving the information. It may not function in all areas or at all times.At the start screen, select Menu > Settings > Call settings > Location info sharing >Emergency or On > OK > OK.Emergency—This is the default profile. The phone location information is shared only during an emergency call to the official emergency number programmed into your phone. The phone screen displays   in the upper, left-hand corner of the start screen.
Settings54On—The phone location information is shared with the network whenever the phone is powered on and activated. The screen displays   in the upper left-hand corner of the start screen.Location information will always be shared with the network during emergency calls to the official emergency number programmed into the phone, regardless of which setting is selected. After placing an emergency call, the phone remains in emergency mode for five minutes. During this time, the location information will be shared with the network. See "Emergency calls," page 88.Anykey answerAnykey answer allows you to answer an incoming call: briefly press any key except the Power key, Right selection key, or End key.At the start screen, select Menu > Settings > Call settings > Anykey answer > On or Off.Automatic redialOccasionally, your network may experience heavy traffic, resulting in a fast busy signal when you dial. With automatic redial activated, your device redials the number until the call is successful, or is terminated.At the start screen, select Menu > Settings > Call settings > Automatic redial > On or Off.1-touch dialingYou can activate or deactivate 1-touch dialing. At the start screen, select Menu > Settings > Call settings > 1-touch dialing > On or Off. See "1-touch dialing," page 29.Auto-update of serviceThis feature is a network service. Your device is capable of receiving updates to network services sent to your device by your service provider.At the start screen, select Menu > Settings > Call settings > Auto-update of service > On or Off.
Settings55Minibrowser confirmationYou can specify whether or not you want your device to display messages when you begin or end a browser session.1. Select Menu > Settings > Call settings >Minibrowser confirmation. 2. Select one of the following options:None—No confirmation notes are displayed.Both—Confirmation required before connecting to the Internet and before you terminate a browser session.On connection—Device asks you to confirm your awareness to possible charges incurred for Internet access.On exit—Device asks you to confirm your wish to end browsing.Calling cardIf you use a calling card for long distance calls, you can save the calling card numbers in your device. Your device can store up to four calling cards.Save information1. At the start screen, select Menu > Settings > Call settings > Calling card.2. Enter your lock code, and select OK.3. Scroll to one of the four memory locations, and select Options > Edit > Dialing sequence.4. Select one of the following sequence types:Access no. + phone no. + card no.—Dial the calling card access number, phone number, card number, and PIN, if required.Access no. + card no. + phone no.—Dial the calling card access number, card number, PIN (if required), and phone number.Prefix + phone no. + card no.—Dial the prefix (numbers that must precede the phone number), phone number, card number, and PIN (if required).5. Enter the required information (access number or prefix and card number), and select OK to confirm your entries.6. Select Card name.
Settings567. Enter the card name, and select OK.Contact your calling card company for more information.Make callsAfter you have saved your calling card information in your device, you can make a call using your calling card.1. At the start screen, select Menu > Settings > Call settings > Calling card. 2. Enter your lock code, and select OK. (See "Change the lock code," page 63.)3. Scroll to the calling card of your choice, and select Options > Select > OK.4. Press End to return to the start screen; then enter the phone number, including any prefix (such as 0 or 1) that your calling card may require when you make a calling card call. See your calling card for instructions.5. Press and hold Call for a few seconds until Card call is displayed.6. When you hear the tone or system message, select OK.International prefixYou can store an international dialing prefix into your device. When you enter + at the beginning of a phone number, your device automatically inserts the international dialing prefix that you have stored.1. At the start screen, select Menu > Settings > Call settings > International prefix.2. Enter the international dialing prefix (for example, 0011) and select OK.3. At the start screen, press * twice to use + and enter the phone number you wish to call, for example, +3546789.The device dials the international dialing prefix you have stored in your device and the phone number you have entered (for example, the device dials 00113546789).Data and fax callsData or fax calls is a network service. See "Network Services," page 9.If your wireless service provider supports this feature, you can set up the device to send or receive data or fax calls when a terminal, such as a PDA or PC, is connected.
Settings57For better performance during data calls, place the device on a stationary surface. Do not move the device by holding it in your hand during a data call.For more information on connectivity, see the PC/PDA Connectivity Guide. The PC/PDA Connectivity Guide can be downloaded from the Nokia web site at http://www.nokiausa.com/us.1. At the start screen, select Menu > Settings > Call settings > Data/fax calls > Incoming data/fax call and one of the following options:Normal—The device receives incoming calls as usual.Data calls only—The device receives only data calls.Fax calls only—The device receives only fax calls.2. When you are finished receiving the fax or data call, repeat Steps 1 and 2 and select Normal.Data transferTo view the transmission speed when sending or receiving data or fax calls, at the start screen, select Menu > Settings > Call settings > Data/fax calls > Data rate display > Graphic or Off.Call SummaryYour device can display the time spent on a call when you hang up.At the start screen, select Menu > Settings > Call settings > Call summary > On or Off.■Phone settingsPhone language1. At the start screen, select Menu > Settings > Phone settings > Phone language.2. Select the language of your choice.The language setting may affect the time and date formats of the clock, alarm clock, and calendar.
Settings58Automatic keyguardYou can set the keypad of your device to lock automatically after a preset time delay.1. At the start screen, select Menu > Settings > Phone settings > Automatic keyguard > On or Off. 2. If you select On, Set delay is displayed.3. Enter the delay (in minutes and seconds), and select OK.When keyguard is on, it may be possible to dial the emergency number programmed into your device. Touch tonesTouch tones are the tones that sound when you press the keys on your device keypad. You can use touch tones for many automated dial-up services such as banking and airlines or for entering your voice mailbox number and password. Touch tones are sent during an active call. You can send them manually from your device keypad, or send them automatically by saving them in your device.Set type1. At the start screen, select Menu > Settings > Phone settings > Touch tones > Manual Touch tones.2. Select one of the following options:Continuous—The tone sounds for as long as you press and hold a key.Fixed—Used to send tones of the duration you specify in the Touch tone length option.Off—Used to turn off tones. No tones are sent when you press a key.Set length You can also specify touch tone length when using the Fixed option.At the start screen, select Menu > Settings > Phone settings > Touch tones > Touch tone length > Short (0.1 second) or Long (0.5 second).Welcome noteYou can write a welcome note which briefly appears on the display screen, if provided by your service provider, whenever you switch your device on.
Settings59Predictive text input is not available for entering Welcome note text.1. At the start screen, select Menu > Settings > Phone settings > Welcome note.2. Enter a note (up to 44 characters). Press * to display and select from available special characters.3. When you are finished, select Options > Save. Select Delete if you want to delete the previous text and begin creating another welcome note.BannerBanner is a network service. See "Network Services," page 9. If your wireless service provider supports this feature, you can choose whether the display shows the operator logo or your own banner in text when the device is in the idle state.At the start screen, select Menu > Settings > Phone settings >Banner >Default or Customize.Help text activationYour device displays brief descriptions for most menu items. When you arrive at a feature or menu, pause for about 10 seconds, and wait for the help text to display. Scroll through the full help text, if necessary.The default setting for help text is on. However, you can turn help text on or off.At the start screen, select Menu > Settings > Phone settings > Help text activation > On or Off.Display brightnessYou can change the brightness of your device display.1. At the start screen, select Menu > Settings > Phone settings > Display brightness.2. Scroll up and down to adjust the brightness level to your preference.3. Select OK to accept your settings.
Settings60■Time and date settingsTimeShow or hide the clockAt the start screen, select Menu > Settings > Time and date settings > Clock > Show clock or Hide clock.Set the time1. At the start screen, select Menu > Settings > Time and date settings > Clock > Set the time.2. Enter the time in hh:mm format, and select OK.3. Select am or pm (only when the 12-hour format is in use).Change the formatAt the start screen, select Menu > Settings > Time and date settings >Clock > Time format > 24-hour or 12-hour. DateShow or hide the dateAt the start screen, select Menu > Settings > Time and date settings >Date > Show date or Hide date.Set the date1. At the start screen, select Menu > Settings > Time and date settings >Date > Set the date.2. Enter the date, and select OK. Change the date format1. At the start screen, select Menu > Settings > Time and date settings > Date > Date format and the format of your choice.2. With Date on the display, select Date separator and the separator of your choice.
Settings61Set the auto-updateAuto-update is a network service. See "Network Services," page 9.If your wireless service provider supports this feature, you can allow the digital network to set the clock, which is useful when you are out of your home area (for example, when you travel to another network or time zone).At the start screen, select Menu > Settings > Time and date settings >Auto-update of date & time > On, Confirm first, or Off.If you use the Auto-update of date & time option while outside your digital network, you may be prompted to enter the time manually. Network time will replace the time and date when you re-enter your digital network.If your battery is removed or discharged outside the digital network, you may be prompted to enter the time manually (once the battery is replaced or recharged and you are still outside of the digital network). ■Voice commandsYou can set as many as five voice commands, which allow hands-free operation of certain device features. Add a voice commandBefore using a voice command, you must add the command to the device function. 1. At the start screen, select Menu > Settings > Voice commands.2. Select the device function you wish to tag: Profiles, Voice mailbox, Voice recorder, or Call log.3. If necessary, select an option associated with that function, and select Options > Add command.4. Select Start, and speak the voice command clearly into the microphone.Do not select Quit unless you want to cancel the recording.The device replays then saves the recorded command.  appears next to functions that have voice commands assigned.
Settings62Activate a voice commandAfter you have associated a voice command with a device function, you can request the function by speaking the voice command.1. Select and hold Contacts.2. When Please speak now appears, pronounce the voice command clearly into the microphone. When the device finds the voice command, Found appears, and the device plays the recognized voice command through the earpiece. The function you requested is activated.Voice command optionsAfter you have associated a voice command with a function, select one of the following options:Playback—Listen to the voice command.Change—Change the voice command.Delete—Erase the voice command.■Enhancement settingsThe enhancement settings menu is shown only if the device has been connected to a compatible enhancement.At the start screen, select Menu > Settings > Enhancement settings > Headset, Handsfree, Loopset, TTY/TDD, or Charger and the desired accessory.■Security settingsPhone lockThe phone lock feature protects your device from unauthorized outgoing calls or unauthorized access to information stored in the device. When phone lock is activated, Phone locked is displayed each time you turn your device on.When the device is locked, calls still may be possible to the official emergency number programmed into your device.1. At the start screen, select Menu > Settings > Security settings > Phone lock. 2. Enter the lock code, and select OK.
Settings633. Select one of the following options:On turns the phone lock feature on immediately after the device is turned off and then on.Off immediately turns off the phone lock feature.Call not allowed is displayed if you attempt to place a call while the device is locked.To answer a call with phone lock on, select Answer, or press Call.Allowed phone number when phone lockedWhen phone lock is on, the only outgoing calls that can be made are to the emergency number programmed into your device (for example, 911 or other official emergency number) or the number stored in the Allowed number when phone locked location.1. At the start screen, select Menu > Settings > Security settings > Allowed number when phone locked. 2. Enter the lock code, and select OK.3. Enter the phone number; or select Search, recall the number from the phone book, and select OK.Change the lock codeTip: Avoid using codes similar to emergency numbers such as 911 to prevent accidental dialing of the emergency number.The lock code controls access to features and is supplied with the device. The preset lock code is the last four digits of your phone number. When you change the lock code, keep the new code secret and in a safe place separate from your device.1. At the start screen, select Menu > Settings > Security settings > Change lock code. 2. Enter the current lock code (the default is the last four digits of your phone number), and select OK.3. Enter the new lock code (5 characters), and select OK.4. Reenter the new lock code for verification, and select OK.
Settings64Restrict callsCall restriction is a network service. See "Network Services," page 9.If your wireless service provider supports this feature, you can restrict the calls your device can make and receive. When calls are restricted, calls still may be possible to the official emergency number programmed into your device.1. At the start screen, select Menu > Settings > Security settings > Call restrictions.2. Enter the lock code, and press OK.3. Select the types of calls you wish to restrict:Restrict outgoing calls—Calls cannot be made. Restrict incoming calls—Calls cannot be received.4. Select one of the following options:Select—Restricts a specific number or All calls. Select Mark to enable a restriction.Add restriction—Enter a specific number and name, or select Search to enter a number from the contacts list.Edit—Allows you to edit previously entered restricted numbers.Delete—Allows you to delete previously entered restricted numbers.■NetworkThe menu options you see in your device are based on your service provider’s network. The network determines which options actually appear in the device menu. Check with your service provider for more information.The Network menu allows you to customize the way your device chooses a network in which to operate while you are within or outside of your primary or home system. Your device is set to search for the most cost-effective network. If your device cannot find a preferred network, it selects a network automatically based on the option you choose in the Network.Roaming optionsYou can set your device to roam or search for another network when you are not in your home area.1. At the start screen, select Menu > Settings > Network > Roaming options.
Settings652. Select one of the following:Home only—You can make and receive calls in your home area only.Automatic—The device automatically searches for service in another digital network. If one is not found, the device uses analog service. The roaming rate applies when not in the home service area.3. Press OK, if necessary, to confirm the activation.■Network services featuresThe following features are network services. See "Network Services," page 9.Store a feature code1. At the start screen, select Menu > Settings > Network services > Network feature setting. 2. Enter the feature code from your service provider (for example, *900 to activate Forward if busy), and select OK. 3. Select Call forwarding.4. Scroll to the type of forwarding that matches the feature code you entered (for example, Forward if busy), and select Activate.The activated feature code is now stored in your device, and you are returned to the Feature code: field. Continue entering other feature codes (for example, *900 to cancel Forward if busy), or press End to return to the start screen.When you enter a network feature code successfully, the feature becomes visible in the Network services menu.Call forwardCall forward tells your network to redirect incoming calls to another number. Call forward is a network service and may not work the same in all networks, so contact your wireless provider for availability.ActivateThis is a network service. All options listed may not appear in the display. Contact your wireless provider for more information.1. At the start screen, select Menu > Settings > Network services > Call forwarding.
Settings662. Select one of the following options:Forward all calls—Forwards all calls to the number you specify.Forward if busy—Forward incoming calls when you are in a call.Forward if not answered—Forward incoming calls to another number if you are unable to answer. You can set a delay before forwarding takes place.Forward if out of reach—Forward incoming calls when your device is off.Forward all data calls—Forward incoming data calls to the number you specify.Cancel all call forwarding—Cancel any call forwarding options you have set.3. Select Activate.4. Enter the number to which your calls, data, or other information will be forwarded; and select OK.CancelAt the start screen, select Menu > Settings > Network services > Call forwarding > Cancel all call forwarding.Cancel all call forwarding may affect your ability to receive voice mail messages. Contact your wireless provider for specific details.Call waitingIf your wireless provider supports this feature, call waiting notifies you of an incoming call even while you are in a call. You can then accept, decline, or ignore the incoming call.1. At the start screen, select Menu > Settings > Network services > Call waiting > Activate or Cancel.2. During a call, select Answer, or press Call to answer the waiting call.The first call is put on hold. 3. Press End to end the active call.
Settings67Send my caller IDIf your wireless service provider supports this feature, then you can prevent your number from appearing on the receiving party’s caller ID.At the start screen, select Menu > Settings > Network services > Send my caller ID > Yes or No.Own number selectionAt the start screen, select Menu > Settings > Network services > Own number selection. This feature is carrier dependent.■Restore factory settingsYou can reset some of the menu settings to their original values. Data that you have entered or downloaded is not deleted (for example, entries in your contacts list are not affected).1. At the start screen, select Menu > Settings > Restore factory settings.2. Enter the lock code (the default lock code is the last four digits of your phone number), and select OK.
Organizer688. OrganizerYour device contains features to help organize your everyday life, including an alarm clock, calendar, calculator, countdown timer, and stopwatch. ■Alarm clockSet an alarmThe alarm clock is based on the device clock. It sounds an alert any time you specify and works even when the device is turned off. 1. At the start screen, select Menu > Organizer > Alarm clock. If the alarm has been previously set, select On.2. Enter the time for the alarm in hh:mm format, and select OK. 3. Select am or pm if 12-hour format has been selected.Alarm on appears briefly in the display, and   appears on the start screen.Alarm conditionsWhen the alarm sounds, your device beeps and/or vibrates (if vibrate alert is on in the currently active profile), and lights up.With the device on, select Stop to shut the alarm off, or select Snooze. If you select Snooze, the alarm stops for 10 minutes, and Snooze on appears in the display.If you do not press a key, the alarms stops after 1 minute and snoozes for 10 minutes, then sounds again.If the alarm time is reached while the device is switched off, the device switches itself on and starts sounding the alarm tone. If you select Stop, the device asks whether you want to activate the device for calls. Select No to switch off the device or Yes to make and receive calls. Do not select Yes when wireless device use may cause interference or danger.Turn an alarm offAt the start screen, select Menu > Organizer > Alarm clock > Off.
Organizer69■CalendarThe calendar keeps track of reminders, calls you need to make, meetings, memo, and birthdays. It can even sound an alarm for any of these events.Monthly view provides an overview of the selected month and weeks. It also allows you to jump to a specific date. Any days or dates that appear in bold font contain calendar notes such as a meeting or reminder.OpenAt the start screen, select Menu > Organizer > Calendar.You can move the cursor in some calendar views with the scroll keys.Go to a date1. At the start screen, select Menu > Organizer > Calendar > Options > Go to date.2. Enter the date (for example, 07/15/2004), and select OK.Note a specific dateYour device asks for further information depending on the type of note you select. You can also set an alarm for your note.1. Go to the date for which you want to set a reminder. See "Go to a date," page 69.2. From the monthly view, with the date highlighted, select Options > Make a note.3. Select one of the following note types:Meeting—You are prompted to enter a subject, location, and a start and end time. You are then given the option to set an alarm.Call—You are prompted to enter a phone number, a name, and the time. You are then given the option to set an alarm.Birthday—You are prompted to enter the person’s name and year of birth. You are then given the option to set an alarm.Memo—You are prompted to enter a subject and an end date. You are then given the option to set an alarm.
Organizer70Reminder—You are prompted to enter the subject of the reminder. You are then given the option to set an alarm.4. Enter your note, and select Options > Save.View notes (day view)After you have created some calendar notes, you can view them as follows:1. At the start screen, select Menu > Organizer > Calendar.2. Scroll to the date containing the note.Any days containing notes will be in bold type.3. Select Options > View day. 4. To view a highlighted note, select Options > View.Options while viewing a list of notesSelect Options while viewing a day’s notes and one of the following:The options listed below are available while viewing the body of a note. View—View the full note.Make a note—Create a new note for the selected date.Delete—Delete the note.Edit—Edit the note.Move—Move the note to another date on your calendar.Repeat—Enable the note to recur on a regular basis (daily, weekly, bi-weekly, monthly, and yearly).Tip: Repeat is not available for Birthday note.Go to date—Jump to another date on your calendar.Send note—Send the note to another device using text message, or in calendar format.Copy—Copy the note. You can then paste the note to another date.Settings—Set the date and time, format, the day each week starts, and whether you want your notes to auto-delete after a specified time.
Organizer71Send a note1. At the start screen, select Menu > Organizer > Calendar.2. Scroll to the date containing the note you wish to send.Any days containing notes will be in bold type.3. Select Options > View day.4. Select the note you wish to send and Options > Send note > Via calendar or Via text msg.5. If you select Via calendar, enter the number for the recipient; or select Search to retrieve a number from the contacts list and OK. The note is sent.6. If you select Via text msg., select Add number.7. Enter the number for the recipient; or select Search to retrieve a number from the contacts list and OK.8. Select Options > Send.Receive notesWhen you receive a calendar note, your device displays notification that the calendar note arrived. Save the note in your calendar, and set an alarm for any date and time.View notes1. When your device displays notification that the calendar note arrived, select Show.2. Scroll to view the entire message, if necessary.Save notesAfter viewing the calendar note, select Options > Save.Discard notesAfter viewing the calendar note, select Options > Discard.■Voice recorderThis feature allows you to record speech or sound with your device and listen to them later. The total available time is 60 seconds if no memos have been stored. The maximum length of a recording depends on how much memory remains available. The recorder cannot be used when a data call connection is active.
Organizer72Record speech or sound1. At the start screen, select Menu > Organizer > Voice recorder > Record.2. After the recorder start tone is heard, begin recording speech or sound.3. When you are finished recording, select Stop.4. Type in a name for the recording, and select OK. The recording is saved to the recording list.OptionsAfter you have saved the recording to the Recordings list, highlight the recording and select one of the following options:Playback —Listen to the recording using the earpieceDelete —Erase the recordingEdit title —Rename the recordingAdd alarm —Add an alarm to the recording■CalculatorThe calculator in your device adds, subtracts, multiplies, divides, calculates the square and the square root, changes the sign of the number entered, and converts currency values.This calculator has a limited accuracy and is designed for simple calculations.1. At the start screen, select Menu > Organizer > Calculator.2. Enter the first number in the calculation.Press # for a decimal point if necessary.Press * to cycle through the add (+), subtract (-), multiply (*), and divide (/) characters. Pause briefly to select the displayed character.3. Enter the second number in your calculation.4. Select Options (equals is highlighted).To perform a square or square root calculation, select Options > Square or Square root. Select Options > Change sign to change the sign of your result.
Organizer73Currency converterYou can convert foreign currency to domestic or vice versa.1. At the start screen, enter a currency amount to convert.2. Select Options > To home or To foreign.To home—converts foreign currency to domestic currency.To foreign—converts domestic currency to foreign currency.If you have not done so already, you are prompted to enter the exchange rate.3. Enter the exchange rate (press # to insert a decimal), and select OK.You can also edit the exchange rate at any time.When you change base currency, you must enter the new rates because all previously set exchange rates are set to zero.1. At the start screen, select Menu > Organizer  > Calculator > Options > Exchange rate > Foreign unit expressed in domestic units or Domestic unit expressed in foreign units.Foreign unit expressed in domestic units—The number of home units it takes to make one unit of foreign currency.Domestic unit expressed in foreign units—The number of foreign units it takes to make one unit of your home currency.2. Enter the exchange rate, and select OK.■Countdown timerYou can enter a specified time (up to 99 hours and 59 minutes). When the time runs out, your device sounds an alarm.The countdown timer only works when the device is on. When you turn off your device, the timer is no longer active.Set the countdown timer1. At the start screen, select Menu > Organizer > Countdown timer.2. Enter the time (in hh:mm format), and OK.3. Enter a note for the timer, and OK.   appears on the start screen when the countdown timer is set.
Organizer74When the time runs out, your device sounds an alarm, displays the timer note, and flashes its lights. • Press any key during the alarm to stop the timer. • After 60 seconds the timer alert expires automatically.Change the timeAfter you have set the timer, you can change the time. 1. At the start screen, select Menu > Organizer > Countdown timer > Change time.2. Enter the new time, and select OK.3. Leave the note as it was; or enter a new note, and select OK. Stop the timer before the alarm soundsAfter you have set the timer, you can stop the timer.At the start screen, select Menu > Organizer > Countdown timer > Stop timer.■StopwatchYour device has a stopwatch that can be used to track time. The stopwatch displays time in hours, minutes, seconds, and fractions of a second in hh:mm:ss:s format.Using the stopwatch or allowing it to run in the background when using other features increases the demand on battery power and reduces the battery life.Split or Lap timeUse the split time function for such things as a long distance race when you need to pace yourself.1. At the start screen, select Menu > Organizer > Stopwatch > Split timing or Lap timing > Start.Split timing—You can use the split time function for such things as a long distance race when you need to pace yourself. Select Split to note the lapsed time. The timer continues to run and the split time appears below the running time. Each time you select Split, the new measured time appears at the beginning of the list.
Organizer75Lap timing—You can use the lap time function when you want to track how long it takes to complete each cycle or lap. Select Lap to note the lap time. The clock stops, then immediately from zero. The lap time appears below the running time. Each time you select Lap, the new measured time appears at the beginning of the list.2. Select Stop to end timing and display total time.Save, view or delete split and lap times• To save a time while the clock is running select Stop > Save, enter a name for the measurement, and select OK. If you do not enter a name, the total time is used as the default title for the lap or split time.• To view the last measured time, from the start screen, select Menu > Organizer > Stopwatch > Split timing or Lap timing > Show last time.• To browse saved times, from the start screen, select Menu > Organizer > Stopwatch > Split timing or Lap timing > View times.• To delete a saved time, from Stopwatch, select View times > Select > Delete or select Delete times > One by one or Delete all.Operation noteIf you press End and return to the start screen, the clock continues to run in the background, and   appears in the upper left corner of the screen.To return to the stopwatch, do the following:1. At the start screen, select Menu > Organizer > Stopwatch >Continue.2. To stop the clock, select Stop.
Games769. Games Challenge yourself or a friend to one of the fun games in your device.Some menus listed are network services. Contact your wireless provider for more information.■Game settingsAt the start screen, select Menu > Games > Settings > Game sounds, Game lights, or Shakes.■Play a game1. At the start screen, select Menu > Games > Select game.2. Select a game.3. Options and submenus vary with each game. Select one of the following options, if supported by the game:New game—Launches a new game.High scores—View the high scores for this game (if previously played).Instructions—View instructions for playing the game. Select More for more information.
Minibrowser7710. Minibrowser Minibrowser is a carrier dependent feature and a network service. See "Network Services," page 9.Your device has a built-in browser you can use to connect to selected services on the mobile Internet. If your wireless service provider supports this feature, then you can view weather reports, check news or flight times, view financial information, and much more. The web browser on your device can display WAP-based content.Your device may have some bookmarks loaded for sites not affiliated with Nokia. Nokia does not warrant or endorse these sites. If you choose to access them, you should take the same precautions, for security or content, as you would with any Internet site.■Mobile Internet accessBecause mobile Internet content is designed to be viewed from your device, your wireless provider is now your mobile Internet service provider as well.Your wireless provider has created a home page and set up your browser to go to this page when you log on to the mobile Internet. At your service provider’s home page, you may find links to a number of other sites.It should not be necessary to manually configure the browser on your device. Normally this is done by your wireless provider when you have subscribed to the feature. Contact your wireless provider if you have problems using the browser.■Sign on to the mobile InternetDepending on your device’s carrier, at the start screen, select Menu > Minibrowser > Connect or Menu > My Metro.After a brief pause, your device attempts to connect to your wireless provider’s home page. If you receive an error message, your device may not be set up for browsing. Contact your wireless provider to make sure that your device is configured properly.
Minibrowser78■Navigate the mobile InternetSince your device screen is much smaller than a computer screen, mobile Internet content is displayed differently than you may be accustomed to seeing. This section contains guidelines for using device keys to navigate a WAP site.Device keys• To browse the WAP site, scroll up or down.• Select a highlighted item.• To enter letters and numbers, press a key from 0–9.• To enter special characters, press *.Receive a call while onlineDepending on your wireless service provider, you may still be able to receive a voice call while using the WAP browser.To answer the incoming call, press Call. To decline the call, press End.After you end your voice call, the mobile Internet connection automatically resumes.If your wireless service provider does not support incoming calls while browsing, then the incoming calls are automatically forwarded to voice mail.Make an emergency call while onlineYou can end your data connection and then make an emergency call. 1. To close your mobile Internet connection, press End.2. Press End as many times as needed to clear the display and ready the device for calls. 3. Enter the emergency number for your present location (for example, 911). Emergency numbers vary by location.4. Press Call.DisconnectTo close your mobile Internet connection, press and hold End.
PC Connectivity7911. PC ConnectivityWith the PC Suite you can create and send text and picture messages and synchronize contacts and calendar between your device and a compatible PC. You may find more information for PC suite in the support area on the Nokia web site, www.nokiausa.com.Some of the features in PC Suite are carrier dependent.■PC suiteThe PC Suite contains the following features:• Nokia Image Converter to make images usable for multimedia messages or wallpapers and to transfer them to your device.• Nokia Sound Converter to edit polyphonic ringing tones to be compatible with your device and to transfer them to your device.• Nokia Content Copier to copy information or back up information from your device to the PC or to another compatible Nokia device.• Nokia Phone Editor to send text messages and edit the contacts directory and message settings of your device.• Nokia PC Sync to synchronize the contacts directory and calendar between your device and a compatible PC.• Nokia Connection Manager to select the connection type between the PC and the device.• Nokia Phone Browser to copy images and tones from your device to your PC and vice versa.Copyright protection may prevent some images, ring tones, and other content from being copied, modified, transferred, or forwarded.
Enhancements8012. EnhancementsCheck the model number of any charger before use with this device. This device is intended for use when supplied with power from a Nokia ACP-7, Nokia ACP-12, Nokia AC-1, or Nokia LCH-12 charger.Your device contains a Standard 1070-mAh LI-Ion Battery (BL-6C).Warning: Use only batteries, chargers and enhancements approved by Nokia for use with this particular model. The use of any other types may invalidate any approval or warranty, and may be dangerous. For availability of approved enhancements, please check with your dealer. For availability of approved enhancements, please check with your dealer. A few practical rules about accessories and enhancements:• Keep all accessories and enhancements out of the reach of small children.• When you disconnect the power cord of any accessory or enhancement, grasp and pull the plug, not the cord.• Check regularly that enhancements installed in a vehicle are mounted and are operating properly.• Installation of any complex car enhancements must be made by qualified personnel only.Power• Standard 1070-mAh LI-Ion Battery (BL-6C)• Standard Charger (ACP-7)• Travel Charger (ACP-12)• Retractable Charger (AC-1)• Mobile Charger (LCH-12)Headset and Audio• Boom Headset (HDB-4)• Ear Bud Headset (HS-5)• Retractable Headset (HS-10)• Inductive Loopset (LPS-4)
Enhancements81• TTY/TDD adapter (HDA-10)Car and Desk Stand• Desk Stand (DCV-14)• Easy-to-use Handsfree (HF-3)• Headrest Handsfree (BHF-3)Miscellaneious• Data Cable (CA-42)• Xpress-on Color Covers• Carry CaseSee www.nokia.com/phones for more information about enhancements.
Battery information8213. Battery informationThis section provides information about batteries, chargers, safety guidelines and technical information. Be aware that the information in this section is subject to change as batteries and chargers change.■Charging and discharging batteriesYour device is powered by a rechargeable battery. The full performance of a new battery is achieved only after two or three complete charge and discharge cycles. The battery can be charged and discharged hundreds of times but it will eventually wear out. When the talk and standby times are noticeably shorter than normal, replace the battery. Use only Nokia approved batteries, and recharge your battery only with Nokia approved chargers designated for this device.Unplug the charger from the electrical plug and the device when not in use. Do not leave a fully charged battery connected to a charger, since overcharging may shorten its lifetime. If left unused, a fully charged battery will lose its charge over time.Use the battery only for its intended purpose. Never use any charger or battery that is damaged.Do not short-circuit the battery. Accidental short-circuiting can occur when a metallic object such as a coin, clip, or pen causes direct connection of the positive (+) and negative (-) terminals of the battery. (These look like metal strips on the battery.) This might happen, for example, when you carry a spare battery in your pocket or purse. Short-circuiting the terminals may damage the battery or the connecting object.Leaving the battery in hot or cold places, such as in a closed car in summer or winter conditions, will reduce the capacity and lifetime of the battery and its ability to charge. Always try to keep the battery between 59°F and 77°F (15°C and 25°C). A device with a hot or cold battery may not work temporarily, even when the battery is fully charged. Battery performance is particularly limited in temperatures well below freezing.Do not dispose of batteries in a fire, as they may explode. Batteries may also explode if damaged. Dispose of batteries according to local regulations. Please recycle when possible. Do not dispose as household waste.
Battery information83■Nokia battery authentication guidelinesAlways use original Nokia batteries for your safety. To check that you are getting an original Nokia battery, purchase it from an authorized Nokia dealer, look for the Nokia Original Enhancements logo on the packaging, and inspect the hologram label using the following steps.Successful completion of the four steps is not a total assurance of the authenticity of the battery. If you have any reason to believe that your battery is not an authentic original Nokia battery, you should refrain from using it and take it to the nearest authorized Nokia service point or dealer for assistance. Your authorized Nokia service point or dealer will inspect the battery for authenticity. If authenticity cannot be verified, return the battery to the place of purchase. How do you check the security features on batteries with hologram labels?1. When looking at the hologram label, you should see the Nokia connecting hands symbol from one angle and the Nokia Original Enhancements logo when looking from another angle.2. When you angle the hologram. to the left, right, down, and up sides of the logo, you should see 1, 2, 3, and 4 dots on each side respectively.3. Scratch the side of the label to reveal a 20-digit code, for example, 12345678919876543210. Turn the battery so that the numbers are facing upwards. The 20-digit code reads starting from the number at the top row followed by the bottom row.4. Confirm that the 20-digit code is valid by verifying it at the Nokia website. Go to www.nokia.com/batterycheck and follow the instructions.You should receive a message indicating whether the code can be authenticated.
Battery information84What if your battery is not verified as authentic?If you cannot confirm that your Nokia battery with the hologram label is an authentic Nokia battery, please do not use the battery, but take it to the nearest authorized Nokia service point or dealer for assistance. The use of a battery that is not approved by the manufacturer may be dangerous and may result in poor performance and damage to your device and its enhancements. It may also invalidate any approval or warranty applying to the device.To find out more about original Nokia batteries visit www.nokia.com/battery.■Charging times The following charging times are approximate with the BL-6C 1070 mAh Li-Ion battery:Travel Charger (ACP-12): up to 1 hour 45 minutesStandard Travel Charger (ACP-7): up to 3 hours 45 minutes■Talk and standby timesOperation times are estimates only and depend on signal strength, phone use, network conditions, features used, battery age and condition (including charging habits), temperatures to which the battery is exposed, and many other factors.Talk time: 3.7 up to 4.6 hoursStandby time: 139 up to 212 hours
Care and maintenance85Care and maintenanceYour device is a product of superior design and craftsmanship and should be treated with care. The suggestions below will help you protect your warranty coverage.• Keep the device and all of its parts and accessories out of the reach of small children.• Keep the device dry. Precipitation, humidity and all types of liquids or moisture can contain minerals that will corrode electronic circuits. If your device does get wet, remove the battery and allow the device to dry completely before replacing it.• Do not use or store the device in dusty, dirty areas. Its moving parts and electronic components can be damaged.• Do not store the device in hot areas. High temperatures can shorten the life of electronic devices, damage batteries, and warp or melt certain plastics.• Do not store the device in cold areas. When the device returns to its normal temperature, moisture can form inside the device and damage electronic circuit boards.• Do not attempt to open the device other than as instructed in this guide.• Do not drop, knock, or shake the device. Rough handling can break internal circuit boards and fine mechanics. • Do not use harsh chemicals, cleaning solvents, or strong detergents to clean the device. • Do not paint the device. Paint can clog the moving parts and prevent proper operation.• Use only the supplied or an approved replacement antenna. Unauthorized antennas, modifications, or attachments could damage the device and may violate regulations governing radio devices.• Use chargers indoors.All of the above suggestions apply equally to your device, battery, charger, or any enhancement. If any device is not working properly, take it to the nearest authorized service facility for service.Note: Before sending your device to a service facility, create a backup of data you want to keep such as contacts and calendar notes.
Additional safety information86Additional safety information■Operating environmentRemember to follow any special regulations in force in any area and always switch off your device when its use is prohibited or when it may cause interference or danger. Use the device only in its normal operating positions. This device meets RF exposure guidelines when used either in the normal use position against the ear or when positioned at least 7/8 inch (2.2 cm) away from the body.  When a carry case, belt clip, or holder is used for body-worn operation, it should not contain metal and should position the device at least 7/8 inch (2.2 cm) away from your body.In order to transmit data files or messages, this device requires a quality connection to the network. In some cases, transmission of data files or messages may be delayed until such a connection is available. Ensure the above separation distance instructions are followed until the transmission is completed.■Medical devicesOperation of any radio transmitting equipment, including wireless phones, may interfere with the functionality of inadequately protected medical phones. Consult a physician or the manufacturer of the medical device to determine if they are adequately shielded from external RF energy or if you have any questions. Switch off your phone in health care facilities when any regulations posted in these areas instruct you to do so. Hospitals or health care facilities may be using equipment that could be sensitive to external RF energy.PACEMAKERSPacemaker manufacturers recommend that a minimum separation of 6 inches (15.3 cm) be maintained between a wireless phone and a pacemaker to avoid potential interference with the pacemaker. These recommendations are consistent with the independent research by and recommendations of Wireless Technology Research. To minimize the potential for interference, persons with pacemakers should• Always keep the phone more than 6 inches (15.3 cm) from their pacemaker when the phone is switched on• Not carry the phone in a breast pocket• Hold the phone to the ear opposite the pacemaker to minimize the potential for interference
Additional safety information87If you have any reason to suspect that interference is taking place, switch off your phone immediately.HEARING AIDSSome digital wireless phones may interfere with some hearing aids. If interference occurs, consult your service provider.■VehiclesRF signals may affect improperly installed or inadequately shielded electronic systems in motor vehicles such as electronic fuel injection systems, electronic antiskid (antilock) braking systems, electronic speed control systems, air bag systems. For more information, check with the manufacturer or its representative of your vehicle or any equipment that has been added.Only qualified personnel should service the phone, or install the phone in a vehicle. Faulty installation or service may be dangerous and may invalidate any warranty that may apply to the phone. Check regularly that all wireless phone equipment in your vehicle is mounted and operating properly. Do not store or carry flammable liquids, gases, or explosive materials in the same compartment as the phone, its parts, or enhancements. For vehicles equipped with an air bag, remember that an air bag inflates with great force. Do not place objects, including installed or portable wireless equipment in the area over the air bag or in the air bag deployment area. If in-vehicle wireless equipment is improperly installed and the air bag inflates, serious injury could result.■Potentially explosive environmentsSwitch off your phone when in any area with a potentially explosive atmosphere and obey all signs and instructions. Potentially explosive atmospheres include areas where you would normally be advised to turn off your vehicle engine. Sparks in such areas could cause an explosion or fire resulting in bodily injury or even death. Switch off the phone at refueling points such as near gas pumps at service stations. Observe restrictions on the use of radio equipment in fuel depots, storage, and distribution areas, chemical plants or where blasting operations are in progress. Areas with a potentially explosive atmosphere are often but not always clearly marked. They include below deck on boats, chemical transfer or storage facilities, vehicles using liquefied petroleum gas (such as propane or butane), and areas where the air contains chemicals or particles such as grain, dust or metal powders.FCC regulations prohibit using your wireless device while in the air. The use of wireless telephones in an aircraft may be dangerous to the operation of the aircraft, disrupt the wireless telephone network, and may be illegal.
Additional safety information88Failure to observe these instructions may lead to suspension or denial of telephone services to the offender, legal action, or both.■Emergency callsImportant: Wireless phones, including this phone, operate using radio signals, wireless networks, landline networks, and user-programmed functions. Because of this, connections in all conditions cannot be guaranteed. You should never rely solely on any wireless phone for essential communications like medical emergencies.To make an emergency call, do the following:1. If the phone is not on, switch it on. Check for adequate signal strength. 2. Press End as many times as needed to clear the display and ready the phone for calls. 3. Enter the official emergency number for your present location. Emergency numbers vary by location. 4. Press Call.If certain features are in use, you may first need to turn those features off before you can make an emergency call. If the phone is in an offline or flight mode, you must change the profile to activate the phone function before you can make an emergency call. Consult this guide or your service provider. When making an emergency call, give all the necessary information as accurately as possible. Your wireless phone may be the only means of communication at the scene of an accident. Do not end the call until given permission to do so.■Certification Information (SAR)THE NOKIA 2115 AND NOKIA 2115i DEVICES MEET THE GOVERNMENT'S REQUIREMENTS FOR EXPOSURE TO RADIO WAVES.Your mobile device is a radio transmitter and receiver. It is designed and manufactured not to exceed the limits for exposure to radio frequency (RF) energy recommended by international guidelines (ICNIRP). These limits establish permitted levels of RF energy for the general population. The guidelines are based on standards that were developed by independent scientific organizations through periodic and thorough evaluation of scientific studies. The standards and guidelines include a substantial safety margin designed to assure the safety of the public, regardless of age and health and to account for any variations in measurements.The exposure guidelines for mobile devices employ a unit of measurement known as the Specific Absorption Rate or SAR. The SAR limit stated in the international
Additional safety information89guidelines is 2.0 watts/kilogram (W/kg) averaged over ten grams of tissue. Tests for SAR are conducted using standard operating positions with the device transmitting at its highest certified power level in all tested frequency bands. The actual SAR level of an operating device can be well below the maximum value because the device is designed to use only the power required to reach the network. That amount changes depending on a number of factors such as how close you are to a network base station. The highest SAR value when tested according to international testing procedures for use at the ear for device type RH-66 is 0.75 W/kg. Your phone’s device type is listed on the label located under the battery. SAR values may vary depending on national reporting and testing requirements and the network band. Use of device accessories and enhancements may result in different SAR values. Additional SAR information may be provided under product information at www.nokia.com.USA and Canada: The SAR limit of USA (FCC) and Canada (IC) is 1.6 W/kg averaged over one gram of tissue. Device type RH-66 has also been tested against this SAR limit. The highest SAR value reported under this standard during product certification for use at the ear is 1.20 W/kg and when properly worn on the body is 1.03 W/kg. Information about this device can be found on the FCC's website at http://www.fcc.gov/oet/fccid by searching the equipment authorization system using FCC ID: QMNRH-66. ■Technical informationFeature SpecificationDimensions Width 42.2 mmLength 102.4 mmDepth 21.5 mmWeight 85 g with BL-6C  Wireless networks CDMA 1900 or 800Volume 70 ccFrequency range (Tx) AMPS: 824.04–848.97 PCS:  1851.25–1908.75 MHzCellular: 824.70–848.37 MHz
Additional safety information90■Patent informationManufactured or sold under one or more of the following US patents:OthersFrequency Range (Rx) AMPS: 869.04–893.97 PCS: 1931.25–1988.75 MHzCellular: 869.70–893.37 MHzGPS (2115i) 1575.42 MHz D405445 5491718 5758278 5887250 6025802 6088342 6377813D406583 5596571 5790957 5887252 6029065 6148209 6414640D414189 5642377 5793744 5889770 6047071 6154455 6434186D405784 5699482 5796757 5929813 6055264 6167038 6459689D423515 5701392 5802465 5990740 6072787 6205325 64630314969192 5708656 5821891 5991627 6076181 6253075 64661735440597 5737323 5854978 6005889 6078570 6292474 64807005444816 5754976 5859843 6009129 6084471 6332083 64801556486835 6496150 6570909 6580771 65876854558302 4901307 5056109 5101501 5109390 5265119 RE32580Feature Specification
Additional safety information91■Nokia one-year limited warrantyNokia Inc. (“Nokia”) warrants that this cellular phone (“Product”) is free from defects in material and workmanship that result in Product failure during normal usage, according to the following terms and conditions:1. The limited warranty for the Product extends for ONE (1) year beginning on the date of the purchase of the Product. This one year period is extended by each whole day that the Product is out of your possession for repair under this warranty.2. The limited warranty extends only to the original purchaser (“Consumer”) of the Product and is not assignable or transferable to any subsequent purchaser/end-user.3. The limited warranty extends only to Consumers who purchase the Product in the United States of America.4. During the limited warranty period, Nokia will repair, or replace, at Nokia’s sole option, any defective parts, or any parts that will not properly operate for their intended use with new or refurbished replacement items if such repair or replacement is needed because of product malfunction or failure during normal usage. No charge will be made to the Consumer for any such parts. Nokia will also pay for the labor charges incurred by Nokia in repairing or replacing the defective parts. The limited warranty does not cover defects in appearance, cosmetic, decorative or structural items, including framing, and any non-operative parts. Nokia’s limit of liability under the limited warranty shall be the actual cash value of the Product at the time the Consumer returns the Product for repair, determined by the price paid by the Consumer for the Product less a reasonable amount for usage. Nokia shall not be liable for any other losses or damages. These remedies are the Consumer’s exclusive remedies for breach of warranty.5. Upon request from Nokia, the Consumer must prove the date of the original purchase of the Product by a dated bill of sale or dated itemized receipt.6. The Consumer shall bear the cost of shipping the Product to Nokia in Melbourne, Florida. Nokia shall bear the cost of shipping the Product back to the Consumer after the completion of service under this limited warranty.
Additional safety information927. The Consumer shall have no coverage or benefits under this limited warranty if any of the following conditions are applicable:a) The Product has been subjected to abnormal use, abnormal conditions, improper storage, exposure to moisture or dampness, unauthorized modifications, unauthorized connections, unauthorized repair, misuse, neglect, abuse, accident, alteration, improper installation, or other acts which are not the fault of Nokia, including damage caused by shipping.b) The Product has been damaged from external causes such as collision with an object, or from fire, flooding, sand, dirt, windstorm, lightning, earthquake or damage from exposure to weather conditions, an Act of God, or battery leakage, theft, blown fuse, or improper use of any electrical source, damage caused by computer or Internet viruses, bugs, worms, Trojan Horses, cancelbots or damage caused by the connection to other products not recommended for interconnection by Nokia.c) Nokia was not advised in writing by the Consumer of the alleged defect or malfunction of the Product within fourteen (14) days after the expiration of the applicable limited warranty period.d) The Product serial number plate or the enhancement data code has been removed, defaced or altered.e) The defect or damage was caused by the defective function of the cellular system or by inadequate signal reception by the external antenna, or viruses or other software problems introduced into the Product.8. Nokia does not warrant uninterrupted or error-free operation of the Product. If a problem develops during the limited warranty period, the Consumer shall take the following step-by-step procedure:a) The Consumer shall return the Product to the place of purchase for repair or replacement processing.b) If “a” is not convenient because of distance (more than 50 miles) or for other good cause, the Consumer shall ship the Product prepaid and insured to:Nokia Inc., Attn: Repair Department795 West Nasa Blvd. Melbourne, FL 32901
Additional safety information93c) The Consumer shall include a return address, daytime phone number and/or fax number, complete description of the problem, proof of purchase and service agreement (if applicable). Expenses related to removing the Product from an installation are not covered under this limited warranty.d) The Consumer will be billed for any parts or labor charges not covered by this limited warranty. The Consumer will be responsible for any expenses related to reinstallation of the Product.e) Nokia will repair the Product under the limited warranty within 30 days after receipt of the Product. If Nokia cannot perform repairs covered under this limited warranty within 30 days, or after a reasonable number of attempts to repair the same defect, Nokia at its option, will provide a replacement Product or refund the purchase price of the Product less a reasonable amount for usage. In some states the Consumer may have the right to a loaner if the repair of the Product takes more than ten (10) days. Please contact the Customer Service Center at Nokia at the telephone number listed at the end of this warranty if you need a loaner and the repair of the Product has taken or is estimated to take more than ten (10) days.f) If the Product is returned during the limited warranty period, but the problem with the Product is not covered under the terms and conditions of this limited warranty, the Consumer will be notified and given an estimate of the charges the Consumer must pay to have the Product repaired, with all shipping charges billed to the Consumer. If the estimate is refused, the Product will be returned freight collect. If the Product is returned after the expiration of the limited warranty period, Nokia’s normal service policies shall apply and the Consumer will be responsible for all shipping charges.9. You (the Consumer) understand that the product may consist of refurbished equipment that contains used components, some of which have been reprocessed. The used components comply with Product performance and reliability specifications.10. ANY IMPLIED WARRANTY OF MERCHANTABILITY, OR FITNESS FOR A PARTICULAR PURPOSE OR USE, SHALL BE LIMITED TO THE DURATION OF THE FOREGOING LIMITED WRITTEN WARRANTY. OTHERWISE, THE FOREGOING LIMITED WARRANTY IS THE CONSUMER’S SOLE AND EXCLUSIVE REMEDY
Additional safety information94AND IS IN LIEU OF ALL OTHER WARRANTIES, EXPRESS OR IMPLIED. NOKIA SHALL NOT BE LIABLE FOR SPECIAL, INCIDENTAL, PUNITIVE OR CONSEQUENTIAL DAMAGES, INCLUDING BUT NOT LIMITED TO LOSS OF ANTICIPATED BENEFITS OR PROFITS, LOSS OF SAVINGS OR REVENUE, LOSS OF DATA, PUNITIVE DAMAGES, LOSS OF USE OF THE PRODUCT OR ANY ASSOCIATED EQUIPMENT, COST OF CAPITAL, COST OF ANY SUBSTITUTE EQUIPMENT OR FACILITIES, DOWNTIME, THE CLAIMS OF ANY THIRD PARTIES, INCLUDING CUSTOMERS, AND INJURY TO PROPERTY, RESULTING FROM THE PURCHASE OR USE OF THE PRODUCT OR ARISING FROM BREACH OF THE WARRANTY, BREACH OF CONTRACT, NEGLIGENCE, STRICT TORT, OR ANY OTHER LEGAL OR EQUITABLE THEORY, EVEN IF NOKIA KNEW OF THE LIKELIHOOD OF SUCH DAMAGES. NOKIA SHALL NOT BE LIABLE FOR DELAY IN RENDERING SERVICE UNDER THE LIMITED WARRANTY, OR LOSS OF USE DURING THE PERIOD THAT THE PRODUCT IS BEING REPAIRED.11. Some states do not allow limitation of how long an implied warranty lasts, so the one year warranty limitation may not apply to you (the Consumer). Some states do not allow the exclusion or limitation of incidental and consequential damages, so certain of the above limitations or exclusions may not apply to you (the Consumer). This limited warranty gives the Consumer specific legal rights and the Consumer may also have other rights which vary from state to state.12. Nokia neither assumes nor authorizes any authorized service center or any other person or entity to assume for it any other obligation or liability beyond that which is expressly provided for in this limited warranty including the provider or seller of any extended warranty or service agreement.13. This is the entire warranty between Nokia and the Consumer, and supersedes all prior and contemporaneous agreements or understandings, oral or written, relating to the Product, and no representation, promise or condition not contained herein shall modify these terms.14. This limited warranty allocates the risk of failure of the Product between the Consumer and Nokia. The allocation is recognized by the Consumer and is reflected in the purchase price.15. Any action or lawsuit for breach of warranty must be commenced within eighteen (18) months following purchase of the Product.
Additional safety information9516. Questions concerning this limited warranty may be directed to: Nokia Inc. Attn: Customer Service7725 Woodland Center Blvd., Ste. 150Tampa, FL 33614Telephone: 1-888-NOKIA-2U (1-888-665-4228)Facsimile: (813) 249-9619TTY/TDD Users Only: 1-800-24-NOKIA (1-800-246-6542)17. The limited warranty period for Nokia supplied attachments and accessories is specifically defined within their own warranty cards and packaging.
Additional safety information96Appendix A Message from the CTIA (Cellular Telecommunications & Internet Association)to all users of mobile phones© 2001 Cellular Telecommunications & Internet Association. All Rights Reserved.1250 Connecticut Avenue, NW Suite 800, Washington, DC 20036. Phone: (202) 785-0081Safety is the most important call you will ever make.A Guide to Safe and Responsible Wireless Phone UseTens of millions of people in the U.S. today take advantage of the unique combination of convenience, safety and value delivered by the wireless telephone. Quite simply, the wireless phone gives people the powerful ability to communicate by voice—almost anywhere, anytime—with the boss, with a client, with the kids, with emergency personnel or even with the police. Each year, Americans make billions of calls from their wireless phones, and the numbers are rapidly growing.But an important responsibility accompanies those benefits, one that every wireless phone user must uphold. When driving a car, driving is your first responsibility. A wireless phone can be an invaluable tool, but good judgment must be exercised at all times while driving a motor vehicle—whether on the phone or not.The basic lessons are ones we all learned as teenagers. Driving requires alertness, caution and courtesy. It requires a heavy dose of basic common sense—keep your head up, keep your eyes on the road, check your mirrors frequently and watch out for other drivers. It requires obeying all traffic signs and signals and staying within the speed limit. It means using seatbelts and requiring other passengers to do the same.
Additional safety information97But with wireless phone use, driving safely means a little more. This brochure is a call to wireless phone users everywhere to make safety their first priority when behind the wheel of a car. Wireless telecommunications is keeping us in touch, simplifying our lives, protecting us in emergencies and providing opportunities to help others in need. When it comes to the use of wireless phones, safety is your most important call. Wireless Phone “Safety Tips”Below are safety tips to follow while driving and using a wireless phone which should be easy to remember. 1. Get to know your wireless phone and its features such as 1-touch dialing and redial. Carefully read your instruction manual and learn to take advantage of valuable features most phones offer, including automatic redial and memory. Also, work to memorize the phone keypad so you can use the 1-touch dialing function without taking your attention off the road.2. When available, use a hands-free phone. A number of hands-free wireless phone accessories are readily available today. Whether you choose an installed mounted phone for your wireless phone or a speaker phone accessory, take advantage of these phones if available to you.3. Position your wireless phone within easy reach. Make sure you place your wireless phone within easy reach and where you can grab it without removing your eyes from the road. If you get an incoming call at an inconvenient time, if possible, let your voice mail answer it for you.4. Suspend conversations during hazardous driving conditions or situations. Let the person you are speaking with know you are driving; if necessary, suspend the call in heavy traffic or hazardous weather conditions. Rain, sleet, snow and ice can be hazardous, but so is heavy traffic. As a driver, your first responsibility is to pay attention to the road.5. Do not take notes or look up phone numbers while driving. If you are reading an address book or business card, or writing a “to do” list while driving a car, you are not watching where you are going. It’s common sense. Don’t get caught in a dangerous situation because you are reading or writing and not paying attention to the road or nearby vehicles.6. Dial sensibly and assess the traffic; if possible, place calls when you are not moving or before pulling into traffic. Try to plan your calls before you begin your trip or attempt to coincide your calls with times you may be stopped at a stop sign, red light or otherwise stationary. But if you need to dial while
Additional safety information98driving, follow this simple tip—dial only a few numbers, check the road and your mirrors, then continue.7. Do not engage in stressful or emotional conversations that may be distracting. Stressful or emotional conversations and driving do not mix—they are distracting and even dangerous when you are behind the wheel of a car. Make people you are talking with aware you are driving and if necessary, suspend conversations which have the potential to divert your attention from the road.8. Use your wireless phone to call for help. Your wireless phone is one of the greatest tools you can own to protect yourself and your family in dangerous situations—with your phone at your side, help is only three numbers away. Dial 9-1-1 or other local emergency number in the case of fire, traffic accident, road hazard or medical emergency. Remember, it is a free call on your wireless phone!9. Use your wireless phone to help others in emergencies. Your wireless phone provides you a perfect opportunity to be a “Good Samaritan” in your community. If you see an auto accident, crime in progress or other serious emergency where lives are in danger, call 9-1-1 or other local emergency number, as you would want others to do for you.10. Call roadside assistance or a special wireless nonemergency assistance number when necessary. Certain situations you encounter while driving may require attention, but are not urgent enough to merit a call for emergency services. But you still can use your wireless phone to lend a hand. If you see a broken-down vehicle posing no serious hazard, a broken traffic signal, a minor traffic accident where no one appears injured or a vehicle you know to be stolen, call roadside assistance or other special non-emergency wireless number.Careless, distracted individuals and people driving irresponsibly represent a hazard to everyone on the road. Since 1984, the Cellular Telecommunications Industry Association and the wireless industry have conducted educational outreach to inform wireless phone users of their responsibilities as safe drivers and good citizens. As we approach a new century, more and more of us will take advantage of the benefits of wireless telephones. And, as we take to the roads, we all have a responsibility to drive safely.The wireless industry reminds you to use your phone safely when driving.For more information, please call 1-888-901-SAFE.For updates: http://www.wow-com.com/consumer/issues/driving/articles.cfm?ID=85
Additional safety information99Appendix B Message from the FDA (U.S. Food and Drug Administration) to all users of mobile phones©July 18, 2001For updates: http://www.fda.gov/cdrh/phonesConsumer Update on Wireless PhonesU.S. Food and Drug Administration1. Do wireless phones pose a health hazard?The available scientific evidence does not show that any health problems are associated with using wireless phones. There is no proof, however, that wireless phones are absolutely safe. Wireless phones emit low levels of radiofrequency energy (RF) in the microwave range while being used. They also emit very low levels of RF when in the stand-by mode. Whereas high levels of RF can produce health effects (by heating tissue), exposure to low level RF that does not produce heating effects causes no known adverse health effects. Many studies of low level RF exposures have not found any biological effects. Some studies have suggested that some biological effects may occur, but such findings have not been confirmed by additional research. In some cases, other researchers have had difficulty in reproducing those studies, or in determining the reasons for inconsistent results.2. What is FDA's role concerning the safety of wireless phones?Under the law, FDA does not review the safety of radiation-emitting consumer products such as wireless phones before they can be sold, as it does with new drugs or medical phones. However, the agency has authority to take action if wireless phones are shown to emit radiofrequency energy (RF) at a level that is hazardous to the user. In such a case, FDA could require the
Additional safety information100manufacturers of wireless phones to notify users of the health hazard and to repair, replace or recall the phones so that the hazard no longer exists.Although the existing scientific data do not justify FDA regulatory actions, FDA has urged the wireless phone industry to take a number of steps, including the following:• Support needed research into possible biological effects of RF of the type emitted by wireless phones;• Design wireless phones in a way that minimizes any RF exposure to the user that is not necessary for phone function; and• Cooperate in providing users of wireless phones with the best possible information on possible effects of wireless phone use on human health.FDA belongs to an interagency working group of the federal agencies that have responsibility for different aspects of RF safety to ensure coordinated efforts at the federal level. The following agencies belong to this working group:• National Institute for Occupational Safety and Health• Environmental Protection Agency• Federal Communications Commission• Occupational Safety and Health Administration• National Telecommunications and Information AdministrationThe National Institutes of Health participates in some interagency working group activities, as well.FDA shares regulatory responsibilities for wireless phones with the Federal Communications Commission (FCC). All phones that are sold in the United States must comply with FCC safety guidelines that limit RF exposure. FCC relies on FDA and other health agencies for safety questions about wireless phones. FCC also regulates the base stations that the wireless phone networks rely upon. While these base stations operate at higher power than do the wireless phones themselves, the RF exposures that people get from these base stations are typically thousands of times lower than those they can get from wireless phones. Base stations are thus not the subject of the safety questions discussed in this document.3. What kinds of phones are the subject of this update?The term wireless phone refers here to hand-held wireless phones with built-in antennas, often called cell mobile or PCS phones. These types of wireless phones can expose the user to measurable radiofrequency energy (RF)
Additional safety information101because of the short distance between the phone and the user’s head. These RF exposures are limited by Federal Communications Commission safety guidelines that were developed with the advice of FDA and other federal health and safety agencies. When the phone is located at greater distances from the user, the exposure to RF is drastically lower because a person's RF exposure decreases rapidly with increasing distance from the source. The so-called cordless phones; which have a base unit connected to the telephone wiring in a house, typically operate at far lower power levels, and thus produce RF exposures far below the FCC safety limits.4. What are the results of the research done already?The research done thus far has produced conflicting results, and many studies have suffered from flaws in their research methods. Animal experiments investigating the effects of radiofrequency energy (RF) exposures characteristic of wireless phones have yielded conflicting results that often cannot be repeated in other laboratories. A few animal studies, however, have suggested that low levels of RF could accelerate the development of cancer in laboratory animals. However, many of the studies that showed increased tumor development used animals that had been genetically engineered or treated with cancer-causing chemicals so as to be pre-disposed to develop cancer in the absence of RF exposure. Other studies exposed the animals to RF for up to 22 hours per day. These conditions are not similar to the conditions under which people use wireless phones, so we don’t know with certainty what the results of such studies mean for human health.Three large epidemiology studies have been published since December 2000. Between them, the studies investigated any possible association between the use of wireless phones and primary brain cancer, glioma, meningioma, or acoustic neuroma, tumors of the brain or salivary gland, leukemia, or other cancers. None of the studies demonstrated the existence of any harmful health effects from wireless phone RF exposures. However, none of the studies can answer questions about long-term exposures, since the average period of phone use in these studies was around three years.5. What research is needed to decide whether RF exposure from wireless phones poses a health risk?A combination of laboratory studies and epidemiological studies of people actually using wireless phones would provide some of the data that are needed. Lifetime animal exposure studies could be completed in a few years.
Additional safety information102However, very large numbers of animals would be needed to provide reliable proof of a cancer promoting effect if one exists. Epidemiological studies can provide data that is directly applicable to human populations, but 10 or more years follow-up may be needed to provide answers about some health effects, such as cancer. This is because the interval between the time of exposure to a cancer-causing agent and the time tumors develop — if they do — may be many, many years. The interpretation of epidemiological studies is hampered by difficulties in measuring actual RF exposure during day-to-day use of wireless phones. Many factors affect this measurement, such as the angle at which the phone is held, or which model of phone is used.6. What is FDA doing to find out more about the possible health effects of wireless phone RF?FDA is working with the U.S. National Toxicology Program and with groups of investigators around the world to ensure that high priority animal studies are conducted to address important questions about the effects of exposure to radiofrequency energy (RF).FDA has been a leading participant in the World Health Organization International Electromagnetic Fields (EMF) Project since its inception in 1996. An influential result of this work has been the development of a detailed agenda of research needs that has driven the establishment of new research programs around the world. The Project has also helped develop a series of public information documents on EMF issues.FDA and the Cellular Telecommunications & Internet Association (CTIA) have a formal Cooperative Research and Development Agreement (CRADA) to do research on wireless phone safety. FDA provides the scientific oversight, obtaining input from experts in government, industry, and academic organizations. CTIA-funded research is conducted through contracts to independent investigators. The initial research will include both laboratory studies and studies of wireless phone users. The CRADA will also include a broad assessment of additional research needs in the context of the latest research developments around the world.7. How can I find out how much radiofrequency energy exposure I can get by using my wireless phone?All phones sold in the United States must comply with Federal Communications Commission (FCC) guidelines that limit radiofrequency energy (RF) exposures. FCC established these guidelines in consultation with
Additional safety information103FDA and the other federal health and safety agencies. The FCC limit for RF exposure from wireless telephones is set at a Specific Absorption Rate (SAR) of 1.6 watts per kilogram (1.6 W/kg). The FCC limit is consistent with the safety standards developed by the Institute of Electrical and Electronic Engineering (IEEE) and the National Council on Radiation Protection and Measurement. The exposure limit takes into consideration the body’s ability to remove heat from the tissues that absorb energy from the wireless phone and is set well below levels known to have effects.Manufacturers of wireless phones must report the RF exposure level for each model of phone to the FCC. The FCC website (http://www.fcc.gov/oet/rfsafety) gives directions for locating the FCC identification number on your phone so you can find your phone’s RF exposure level in the online listing.8. What has FDA done to measure the radiofrequency energy coming from wireless phones?The Institute of Electrical and Electronic Engineers (IEEE) is developing a technical standard for measuring the radiofrequency energy (RF) exposure from wireless phones and other wireless handsets with the participation and leadership of FDA scientists and engineers. The standard, Recommended Practice for Determining the Spatial-Peak Specific Absorption Rate (SAR) in the Human Body Due to Wireless Communications Devices: Experimental Techniques, sets forth the first consistent test methodology for measuring the rate at which RF is deposited in the heads of wireless phone users. The test method uses a tissue-simulating model of the human head. Standardized SAR test methodology is expected to greatly improve the consistency of measurements made at different laboratories on the same phone. SAR is the measurement of the amount of energy absorbed in tissue, either by the whole body or a small part of the body. It is measured in watts/kg (or milliwatts/g) of matter. This measurement is used to determine whether a wireless phone complies with safety guidelines.9. What steps can I take to reduce my exposure to radiofrequency energy from my wireless phone?If there is a risk from these products—and at this point we do not know that there is—it is probably very small. But if you are concerned about avoiding even potential risks, you can take a few simple steps to minimize your exposure to radiofrequency energy (RF). Since time is a key factor in how
Additional safety information104much exposure a person receives, reducing the amount of time spent using a wireless phone will reduce RF exposure.If you must conduct extended conversations by wireless phone every day, you could place more distance between your body and the source of the RF, since the exposure level drops off dramatically with distance. For example, you could use a headset and carry the wireless phone away from your body or use a wireless phone connected to a remote antenna.Again, the scientific data do not demonstrate that wireless phones are harmful. But if you are concerned about the RF exposure from these products, you can use measures like those described above to reduce your RF exposure from wireless phone use.10.What about children using wireless phones?The scientific evidence does not show a danger to users of wireless phones, including children and teenagers. If you want to take steps to lower exposure to radiofrequency energy (RF), the measures described above would apply to children and teenagers using wireless phones. Reducing the time of wireless phone use and increasing the distance between the user and the RF source will reduce RF exposure. Some groups sponsored by other national governments have advised that children be discouraged from using wireless phones at all. For example, the government in the United Kingdom distributed leaflets containing such a recommendation in December 2000. They noted that no evidence exists that using a wireless phone causes brain tumors or other ill effects. Their recommendation to limit wireless phone use by children was strictly precautionary; it was not based on scientific evidence that any health hazard exists.11.What about wireless phone interference with medical equipment?Radiofrequency energy (RF) from wireless phones can interact with some electronic devices. For this reason, FDA helped develop a detailed test method to measure electromagnetic interference (EMI) of implanted cardiac pacemakers and defibrillators from wireless telephones. This test method is now part of a standard sponsored by the Association for the Advancement of Medical instrumentation (AAMI). The final draft, a joint effort by FDA, medical device manufacturers, and many other groups, was completed in late 2000. This standard will allow manufacturers to ensure that cardiac pacemakers and defibrillators are safe from wireless phone EMI. FDA has
Additional safety information105tested hearing aids for interference from handheld wireless phones and helped develop a voluntary standard sponsored by the Institute of Electrical and Electronic Engineers (IEEE). This standard specifies test methods and performance requirements for hearing aids and wireless phones so that no interference occurs when a person uses a compatible phone and a accompanied hearing aid at the same time. This standard was approved by the IEEE in 2000.FDA continues to monitor the use of wireless phones for possible interactions with other medical devices. Should harmful interference be found to occur, FDA will conduct testing to assess the interference and work to resolve the problem.12.Where can I find additional information?For additional information, please refer to the following resources:• FDA web page on wireless phoneshttp://www.fda.gov/cdrh/phones/index.html• Federal Communications Commission (FCC) RF Safety Program http://www.fcc.gov/oet/rfsafety• International Commission on Non-Ionizing Radiation Protectionhttp://www.icnirp.de• World Health Organization (WHO) International EMF Projecthttp://www.who.int/emf• National Radiological Protection Board (UK)http://www.nrpb.org.uk/July 18, 2001For updates: http://www.fda.gov/cdrh/phones
Additional safety information106
Index107IndexNUMERICS1-touch dialing 29Aalarm clock 68antenna 16anykey answer 54automate voicemail 44automatic redial 54auto-update 61Bback coverremoving 16replacing 17banner 59batteryauthentication 83charging 17charging times 84removing 16replacing 17talk and standby times 84business cards 34Ccalculator 72calendar 69call duration 49call forward 65call log 48Call settings 53call timers 49caller groups 34setting up 34calling cards 55callsanswering 21in-call options 22making 20care and maintenance 85certification information (SAR) 88chargerconnecting 17times 84contact information 28contact name 28contacts 27contacts listadd 27additions 29delete 28edit 30search 27settings 29countdown timer 73currency converter 73customer care 10Ddialed numbers 49dialing codes 45display language 57DTMF tones 58Eeditcontact name 28emergency calls 88while using wireless Internet 78with keypad locked 58enhancement settings 62enhancements 80ESN 10exchange rate 73FFCC information 88feature codes 65Ggames 76
Index108Hheadset 18help 10help text 15, 59Iindicators and icons 13KKeyguard 22automatic 58Llanguages 57lap time 74location info sharing 53lock code 62change 63loudspeaker 22Mmessage folders 40messagesdelete 42minibrowser messages 47picture messages 46text messages 36voice messages 43minibrowser 77minibrowser messages 47my number 33NNetwork Services 9Oorganizer 68Ppatent information 90phone lock 62numbers allowed 63phone settings 57picture frame cover 20picture messages 46predictive text 25profiles 52Qquick keys 13Rrestore factory settings 67restrict calls 64Ssafety 7important safety information 86saveaddresses and notes 28numbers, text items, details 28scrolling 15security settings 62setdate 60time 60settings 52call 53shared memory 9shortcuts 15split time 74standby time 84start screen 13stopwatch 74Ttalk and standby times 84talk time 84technical information 89text entry 24text messages 36time and date settings 60timed profiles 53tone settings 53turn phone off 18turn phone on 18
Index109Vviewcall duration 49call times 49data/fax call duration 50minibrowser duration 51missed calls 48picture messages 47received calls 48saved messages 41voice commands 61voice dialing 32voice messages 43voice tags 32assign a tag 32options 33voicemail 43automate 44voicemail set up 44volumeadjusting 22using the loudspeaker 22Wwarranty 10welcome note 58wireless Internet 77disconnect 78make an emergency call 78receive a call while online 78sign on 77XXpress-on covers 18
Index110

Navigation menu