Microsoft RH-66 Tri-Mode Dual Band PCS Phone User Manual FCC DRAFT Nokia 2115 and Nokia 2115i User Guide
Microsoft Mobile Oy Tri-Mode Dual Band PCS Phone FCC DRAFT Nokia 2115 and Nokia 2115i User Guide
Manual
3
Nokia 2115 and Nokia 2115i
User Guide
4
LEGAL INFORMATION
The wireless device described in this guide is approved for use in CDMA 800 and
1900 networks.
Part No. 9237536, Issue No. 1
Copyright © 2004 Nokia. All rights reserved.
Nokia, Nokia Connecting People, Nokia 2115, Nokia 2115i, Xpress-on, Pop-Port, and the
Nokia Original Enhancements logos are trademarks or registered trademarks of Nokia
Corporation. Other company and product names mentioned herein may be trademarks or
trade names of their respective owners.
US Patent No 5818437 and other pending patents. T9 text input software Copyright ©1999-
2004. Tegic Communications, Inc. All rights reserved.
Includes RSA BSAFE cryptographic or security protocol software from
RSA Security.
The information contained in this user guide was written for the Nokia 2115 and the
Nokia 2115i products. Nokia operates a policy of ongoing development. Nokia reserves the
right to make changes to any of the products described in this document without prior
notice.
UNDER NO CIRCUMSTANCES SHALL NOKIA BE RESPONSIBLE FOR ANY LOSS OF DATA OR
INCOME OR ANY SPECIAL, INCIDENTAL, AND CONSEQUENTIAL OR INDIRECT DAMAGES
HOWSOEVER CAUSED. THE CONTENTS OF THIS DOCUMENT ARE PROVIDED “AS IS.” EXCEPT
AS REQUIRED BY APPLICABLE LAW, NO WARRANTIES OF ANY KIND, EITHER EXPRESS OR
IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE, ARE MADE IN RELATION TO
THE ACCURACY AND RELIABILITY OR CONTENTS OF THIS DOCUMENT. NOKIA RESERVES THE
RIGHT TO REVISE THIS DOCUMENT OR WITHDRAW IT AT ANY TIME WITHOUT PRIOR NOTICE.
EXPORT CONTROLS
This device may contain commodities, technology, or software subject to export laws and
regulations from the U.S. and other countries. Diversion contrary to law is prohibited.
FCC/INDUSTRY CANADA NOTICE
Your phone may cause TV or radio interference (for example, when using a telephone in close
proximity to receiving equipment). The FCC or Industry Canada can require you to stop using
your telephone if such interference cannot be eliminated. If you require assistance, contact
your local service facility. This device complies with part 15 of the FCC rules. Operation is
subject to the condition that this device does not cause harmful interference.
Contents
5
Contents
For your safety............................................................................................... 7
Welcome.......................................................................................................... 9
1. Device at a glance.................................................................................. 12
2. Set up your phone.................................................................................. 16
3. Text entry ................................................................................................. 24
4. Contacts .................................................................................................. 27
5. Messages ................................................................................................. 36
6. Call log...................................................................................................... 48
7. Settings .................................................................................................... 52
8. Organizer .................................................................................................. 68
9. Games ....................................................................................................... 76
10.Minibrowser .......................................................................................... 77
11.PC Connectivity..................................................................................... 79
12.Enhancements ....................................................................................... 80
13.Battery information ............................................................................. 82
Care and maintenance .............................................................................. 85
Additional safety information................................................................. 86
Nokia one-year limited warranty........................................................... 91
Index............................................................................................................ 107
Contents
6
For your safety
7
For your safety
Read these simple guidelines. Not following them may be dangerous or illegal.
Read the complete user guide for further information.
SWITCH ON SAFELY
Do not switch the device on when wireless phone use is prohibited or
when it may cause interference or danger.
ROAD SAFETY COMES FIRST
Obey all local laws. Always keep your hands free to operate the
vehicle while driving. Your first consideration while driving should be
road safety.
INTERFERENCE
All wireless devices may be susceptible to interference, which could
affect performance.
SWITCH OFF IN HOSPITALS
Follow any restrictions. Switch the device off near medical
equipment.
SWITCH OFF IN AIRCRAFT
Follow any restrictions. Wireless devices can cause interference in
aircraft.
SWITCH OFF WHEN REFUELING
Do not use the phone at a refueling point. Do not use near fuel or
chemicals.
SWITCH OFF NEAR BLASTING
Follow any restrictions. Do not use the device where blasting is in
progress.
USE SENSIBLY
Use only in the normal position as explained in the product
documentation. Don't touch the antenna unnecessarily.
QUALIFIED SERVICE
Only qualified personnel may install or repair this product.
ENHANCEMENTS AND BATTERIES
Use only approved enhancements and batteries. Do not connect
incompatible products.
For your safety
8
WATER-RESISTANCE
Your device is not water-resistant. Keep it dry.
BACKUP COPIES
Remember to make backup copies or keep a written record of all
important information stored in your device.
CONNECTING TO OTHER DEVICES
When connecting to any other device, read its user guide for detailed
safety instructions. Do not connect incompatible products.
EMERGENCY CALLS
Ensure the device is switched on and in service. Press End as many
times as needed to clear the display and return to the main screen.
Key in the emergency number, then press Call. Give your location. Do
not end the call until given permission to do so.
Welcome
9
Welcome
Congratulations on your purchase of the Nokia 2115 or Nokia 2115i mobile
device. Your device provides many functions which are practical for daily use,
such as a hands-free loudspeaker, alarm clock, calculator, calendar, and more. To
personalize your device, you can set your favorite ring tones and select an
Xpress-onTM color cover.
■About your device
The wireless device described in this guide is approved for use on the CDMA 800
or 1900 networks. Contact your service provider for more information about
networks.
When using the features in this device, obey all laws and respect privacy and
legitimate rights of others.
Warning: To use any features in this device, other than the alarm clock,
the phone must be switched on. Do not switch the device on when
wireless phone use may cause interference or danger.
■Network Services
To use the device you must have service from a wireless service provider. Many of
the features in this device depend on features in the wireless network to
function. These Network Services may not be available on all networks or you
may have to make specific arrangements with your service provider before you
can utilize Network Services. Your service provider may need to give you
additional instructions for their use and explain what charges will apply. Some
networks may have limitations that affect how you can use network services. For
instance, some networks may not support all language-dependent characters
and services. See "Network services features," page 65.
Your service provider may have requested that certain features be disabled or not
activated in your device. If so, they will not appear in your device menu. Contact
your service provider for more information.
■Shared memory
The following features in this device may share memory: contacts, text messages,
ring tones, calendar, and games. Use of one or more of these features may reduce
Welcome
10
the memory available for the remaining features sharing memory. Your device
may display a message that the memory is full when you try to use a shared
memory feature. In this case, delete some of the information or entries stored in
the shared memory features before continuing. Some of the features, such as
messages and ring tones may have a certain amount of memory specially allotted
to them in addition to the memory shared with other features.
■Register your device
Make sure to register your device at www.warranty.nokiausa.com or call
1-888-NOKIA-2U (1-888-665-4228) so that we can serve your needs better if
you should need to call a customer center or to have your phone repaired.
■Get help
Find your device label
If you need help, Nokia Customer Care is available for assistance. Before calling,
we recommend that you write down the electronic serial number (ESN) and have
it available.
The ESN is found on the type label, which is located beneath the battery on the
back of the device.
Contact Nokia
Please have your product with you when contacting either of the following
numbers:
Please have your product with you when contacting either of the numbers below:
Nokia Customer Care Center, USA
Nokia Inc.
7725 Woodland Center Boulevard, Suite #150
Tampa, Florida 33614
Tel: 1-888-NOKIA-2U (1-888-665-4228)
Fax: 1-813-249-9619
TTY/TDD users: 1-800-24-NOKIA (1-800-246-6542)
Welcome
11
Customer Care Center, Mexico
Nokia Mexico, S.A. de C.V.
Paseo de los Tamarindos 400-A Piso 16
Col. Bosques de las Lomas
C.P. 05120
Mexico D.F., Mexico
Tel: (55) 261-7200
Fax: (55)261-7299
Customer Care Center, Argentina
Azopardo 1071
C1107ADQ Buenos Aires
Argentina
Tel: (11) 4307-1427
Fax: (11) 4362-8795
Customer Care Center, Canada
Nokia Products Ltd.
601 Westney Road South
Ajax, Ontario L1S 4N7
Tel: 1-888-22-NOKIA (1-888-226-6542)
Fax: 1-905-619-4360
Updates
From time to time, Nokia updates this guide to reflect changes. The latest version
may be available at www.nokiausa.com. An interactive tutorial for this product
may be available at the web site www.nokiahowto.com.
Accessibility solutions
Nokia is committed to making mobile devices easy to use for all individuals,
including those with disabilities. For more information visit the web site at
www.nokiaaccessibility.com.
Device at a glance
12
1. Device at a glance
Power key (1) Microphone (7)
Earpiece (2) Charger port (8)
Right selection key (3) Scroll up and down key (9)
End key (4) Call key (10)
Keypad (5) Left selection key (11)
Connection port (6) Screen (12)
Device at a glance
13
■The start screen
The start screen is home base and indicates your device is in idle mode.
Signal strength (1)—A higher bar indicates a stronger network signal.
Battery level (2)—A higher bar indicates more power in the battery.
Menu (3)—Press the Left selection key to select this option.
Contacts (4)—Press the Right selection key to select this option.
■Quick keys
At the start screen, scroll up to activate the flashlight, or scroll down to go to the
contacts list.
■Indicators and icons
Icon Indicates...
You have one or more text or picture messages. See "Read a
message," page 39.
You have one or more voice messages. See "Voice messages,"
page 43.
You are making a call with the device. See "Make a call,"
page 20.
Your device keypad is locked. See "Keyguard," page 22.
Your device is set to the Silent profile. See "Profiles,"
page 52.
The alarm clock is set to On. See "Alarm clock," page 68.
Device at a glance
14
■Get the most out of this guide
The following sections illustrate the various components of your device.
Familiarize yourself with these sections to help you understand the instructions
that follow.
This guide uses certain terms for the steps that you are asked to perform:
• Press means to press and release a key quickly. For example, press 7 means
press the key on the keypad that is labeled with the number 7 and the letters
pqrs.
• Press and hold means to press and hold a key for 2–3 seconds, then release
the key.
• Selection keys are used to select menu options. To select an option, press the
selection key below the menu item on the device screen.
• Scroll keys are used to move up and down in the menus.
• Press Call to place a call or to answer an incoming call.
• Press End to end a call or press and hold to return to idle mode at the start
screen.
The countdown timer is running. See "Countdown timer,"
page 73.
The stopwatch timing is running in the background. See
"Stopwatch," page 74.
Integrated hands free is active.
The timed profile is selected. See "Profiles," page 52.
or An enhancement is connected to the device.
or Voice privacy encryption is active (or is not active) in the
network.
or Location info sharing is set to Emergency or On. See
"Location info sharing," page 53.
Device is roaming outside of your home network.
Device is in an 1XRTT network. See "Network Services,"
page 9.
Icon Indicates...
Device at a glance
15
■Device menus
Device features are grouped according to function and are accessed through the
main menus. Each main menu contains submenus and lists from which you can
select or view items and customize your device features. You can access these
menus and submenus by using the scroll method.
Scroll method
1. At the start screen, select Menu, and scroll through the main menu using the
up and down scroll key.
2. When you arrive at a menu, press Select (the Left Selection key) to enter a
submenu. Select Connect to enter submenus for minibrowser.
• Select Back from the submenu level to return to the previous menu.
• Select Exit from the main menu level or press End to return to the start
screen from any menu or submenu.
Shortcuts
You can go directly to almost any menu or submenu, as well as activate most
features by using a shortcut.
At the start screen, select Menu; then within 3 seconds press the key or keys
associated with the menu function you would like to view or activate.
For example, to select the Meeting profile, select Menu 4-1-3-1 from the start
screen (Menu > 4 Settings>1 Profiles > 3 Meeting > 1 Activate). After a brief
pause, the Meeting profile is activated.
In-phone help
Many features have brief descriptions (help text) that can be viewed on the
display. To view these descriptions, scroll to a feature, and wait for about 10
seconds. If needed, select More to view all of the description or Back to exit.
In order to view the descriptions, you must first activate help text.
1. At the start screen, select Menu > Settings > Phone settings > Help text
activation.
2. Select On to display help text or Off to turn this feature off.
Set up your phone
16
2. Set up your phone
■The antenna
Your device has an internal antenna located towards the top of the device. Hold
the device as you would any other telephone with the antenna area pointed up
and over your shoulder.
Note: As with any other radio transmitting
device, do not touch the antenna
unnecessarily when the device is switched on.
Contact with the antenna affects call quality
and may cause the device to operate at a
higher power level than otherwise needed.
Avoid contact with the antenna area when
operating the device to optimize antenna
performance and battery life.
■The battery
Important: Always switch the device off and disconnect the charger before
removing the battery.
Before removing the cover, always switch off the power and disconnect the
charger and any other device. Avoid touching electronic components while
changing the covers. Always store and use the device with the covers attached.
Remove the back cover
1. With the back of the device facing
you, push down on the button on
the back of the device.
2. Slide the back cover toward the
bottom of the device and remove.
Remove the battery
After you have removed the back cover, insert your finger into the finger grip and
lift the battery from its compartment.
Set up your phone
17
Replace the battery
Always use original Nokia batteries. See "Battery information," page 82.
1. Position the battery so the
gold-colored contacts match up with
those on the device.
The battery label must face away
from the device.
2. Insert the battery, gold-colored
contact end first, into the battery
slot.
3. Push down on the other end of the
battery to snap the battery into place.
Replace the back cover
Slide the back cover toward the top of the device until you hear a click and see
the back cover release button.
Charge the battery
1. Plug the charger transformer into a standard ac outlet.
2. Insert the charger output plug
into the round jack at the
bottom end of the device.
After a few seconds, the battery
indicator in the display starts to
scroll from bottom to top. If the
battery is completely
discharged, it may take a few
minutes before the charging
indicator appears on the display
or any calls can be made.
Set up your phone
18
■Turn on or off
To turn your device on or off, press and hold the power
key on top of the device for at least 3 seconds.
■Connect the headset
A compatible headset may be included with your
device or purchased separately as an
enhancement. (See "Enhancements," page 80.)
1. Plug the headset connector into the
Pop-Port™ connector at the bottom end of
your device.
2. Position the headset on your ear.
With the headset connected, you can make,
answer, and end calls as usual.
• Use the keypad to enter numbers.
• Press Call to place a call.
• Press End to end a call.
■Change Xpress-on™ covers
Before removing the cover, always switch off the power and disconnect the
charger and any other device. Avoid touching electronic components while
changing the covers. Always store and use the device with the covers attached.
Remove the back cover and the battery
See "Remove the back cover," page 16 and "Remove the battery," page 16 for
instructions on removing the back cover and the battery.
Set up your phone
19
Remove the front cover
Gently pull the bottom of the front cover
away from the rest of the device, and
remove the front cover.
Install the key mat and front cover
1. Remove the key mat from the old front
cover.
2. Place the key mat into the new front
cover.
3. Press the front cover and key mat
against the device, and snap the front
cover into place.
Set up your phone
20
Replace the battery and back cover
See "Replace the battery," page 17 and "Replace the back cover," page 17.
Insert a photo in the back cover
If your device has a picture frame, you can
insert one of your favorite photos in the back
cover to personalize it. The size of the photo
should not be larger than 45 mm x 25 mm.
Trim the sides and corners at the bottom of
the photo. Please note, if the photo is
smaller than the window size, it may not
stay in its position. The photo should be
inserted with its image side facing the
transparent window of the cover.
■Make a call
Use the keypad
1. Enter the phone number (including the area code), and press Call.
To delete a character to the left of the cursor, select Clear.
2. Press End to end the call or to cancel the call attempt.
Use the contacts list
To enter a number into the contacts list, at the start screen, select Contacts >
Add new, and enter the name and phone number. See "Save an entry," page 28.
1. At the start screen, scroll down to display the contents of your contacts list.
2. Select a contact from the list.
3. Press Call to make the call, or select Details to view details of the entry.
Use the last dialed number
1. At the start screen, press Call to display the last 20 numbers dialed.
2. Scroll to the number (or name) you wish to redial, and press Call.
Set up your phone
21
Make a conference call
Conference calling is a network service that allows you to take part in a
conference call with two other participants.
1. Make a call to the first participant.
2. With the first participant on the line, select Options > New call.
3. Enter the phone number of the second participant, or select Search to
retrieve a number from the contacts list.
4. Select Flash.
The first participant is put on hold.
5. When the second participant picks up, press Call to connect the calls.
6. To end the conference call, select Options > End all calls, or press End.
■Answer calls
Answer or silence/decline
Silence/Decline is a carrier-dependent feature.
1. Press Call, or select Answer to answer the call.
2. To mute the ringing tone, select Silence. If you do not answer the call, the call
is eventually forwarded to voicemail.
3. To dismiss and forward the call to voicemail (a carrier-dependent feature),
select Dismiss after you have muted the ringing tone, or press End at any
time.
Answer a call with locked keypad
To answer a call with the keypad locked, press Call. During the call, all features
function as normal. When you end or decline the call, the keypad automatically
relocks. See "Keyguard," page 22.
When the device is locked, calls may be possible to the official emergency
number programmed into your device.
Set up your phone
22
Adjust the volume during a call
To increase or decrease the volume during a call, scroll up or down during the
call. When adjusting the volume, a bar chart indicates the volume level.
Loudspeaker
You can use the loudspeaker on your device during a call.
Warning: Do not hold the device near your ear when the loudspeaker is
in use because the volume may be extremely loud.
• To activate the loudspeaker while in a call, select Loudsp.
• To deactivate the loudspeaker during a call, select Handset.
The loudspeaker is deactivated automatically when a call (or a call attempt) ends
or when certain enhancements are connected.
Options during a call
Many of the options that you can use during a call, are network services. Check
with your wireless service provider for more information.
Select Options during a call to display a list of options available during a call,
then select an option.
■Keyguard
With keyguard, you can lock the keypad to prevent keys from being pressed
accidentally and to prevent accidental calls. If the keypad is locked, it unlocks
when you receive a call. After the call, the lock automatically reactivates.
When keyguard is on, calls may be possible to the official emergency number
programmed into your device.
To lock the keypad, select Menu and press * within 2 seconds.
To unlock the keypad, select Unlock and press * within 2 seconds.
Set up your phone
23
■Flashlight
Your device has a built-in flashlight that you can
activate when the device is in the standby mode or
when there is a call in progress. To activate the
flashlight, scroll up. The light stays on until you release
the scroll key.
Scroll up twice in quick succession for the flashlight to
stay on continually. Press scroll up again to turn the
flashlight off.
You can also use the flashlight to alert you to an incoming call. For more
information, see "Personalize a profile," page 52.
Text entry
24
3. Text entry
You can use two methods for entering text and numbers:
• Standard mode is the only way to enter text into the contacts list, and to
rename caller groups.
• Predictive text is a quick and easy method for writing messages and creating
a calendar note.
■Standard mode
Text (Abc)
• Press a key once to insert the first letter on the key, twice for the second
letter, etc. If you pause briefly, the last letter in the display is accepted and
your device awaits the next entry.
• Press 0 to enter a space thereby accepting a completed word.
• Press 1 to enter a period (.).
• Press * to display special characters. See more about special characters on the
following pages.
Numbers (123)
To switch to 123 mode from Abc mode, press and hold # at any message entry
screen until the icon in the upper left corner of the display switches from Abc to
123 (or vice versa).
• Select Clear to backspace the cursor and delete a character.
• Select and hold Clear to backspace continuously and delete characters.
Punctuation and special characters
While at any text entry screen, press * to display special characters (press and
hold * if predictive text is on). To navigate through the list of special characters,
use the scroll key. Once a character is highlighted, select Insert to insert the
character into your message.
Text entry
25
■Predictive text input
Predictive text input allows you to write messages quickly using your keypad and
the built-in dictionary. It is much faster than the standard mode method,
because for each letter, you only press the corresponding key on your keypad
once.
Activate or deactivate
1. At any text entry screen, select Options > Predictive text.
2. Select the language of your choice.
The language setting affects the time and date formats of the clock, alarm clock,
and calendar.
Text entry
The following illustration simulates your display each time a key is pressed. For
example, to write Nokia with predictive text on and with the English dictionary
selected, press each of the following keys once:
6 6 5 4 2
•Press 0 to enter a space and begin writing the next word.
• If a displayed word is not correct, press * to see other matches. To return to
the previous word in the list of matches, select Previous.
•If ? appears after a word, select Spell to add the word to the dictionary.
•Press 1 to insert a period into your message.
•Press and hold * to display special characters. Press * again to cycle through
all available characters.
•Press # to switch predictive text on or off and to use predictive text in various
modes. As you press #, the following icons (not the descriptions) appear in
the upper left of the display screen:
Uppercase text: standard mode is on.
Lowercase text: standard mode is on.
Text entry
26
Sentence case text: standard mode is on.
Sentence case text: predictive text is on.
Lowercase text: predictive text is on.
Contacts
27
4. Contacts
The contacts list can hold up to 250 contacts, with multiple numbers and text
notes for each contact. The amount of numbers and text entries that you can
save may vary, depending on length and the total number of entries in the
contacts list.
■Contacts options
You can access contacts options in one of two ways:
• At the start screen, select Contacts.
• At the start screen, select Menu > Contacts.
In this chapter, to access contacts options, select Contacts.
■Search
1. At the start screen, select Contacts > Search.
2. Type in the first character of the contact name and highlight the contact you
wish to view.
3. Select Details > Options and the action you want to apply to the contact.
■Add new contacts
Save a name and number
1. At the start screen, enter the phone number you wish to save.
2. Select Options > Save.
3. Enter the name, and select OK.
Save (only) a number
1. At the start screen, enter the phone number you wish to save.
2. Select and hold Options.
Contacts
28
Save an entry
1. At the start screen, select Contacts > Add new.
2. Enter the name, and select OK.
3. Enter the phone number, and select OK > Done.
Save numbers, text items, and details
You can save different types of phone numbers and short text items per name to
the contacts list. The first number you save for any entry is automatically set as
the default, but the default number can always be changed. You can save details
such as addresses and notes as contact information.
1. At the start screen, scroll down to display a list of entries in your contacts list.
2. Scroll to the entry to which you wish to add a phone number, text item, or
other details.
3. Select Details > Options > Add number or Add detail.
4. Select General, Mobile, Home, Work, or Fax type when adding a number; or
select E-mail, Web address, Street addr., or Note when adding details.
5. Enter the number or text for the type you have selected, and select OK.
6. To change the type, select Change type in the options list.
To change the default number for the contact entry:
1. At the start screen, scroll down to the entry you wish to change, and select
Details.
2. Scroll to the number you wish to set as default, and select Options > As
primary no.
■Edit contact name
1. Highlight the phone number of the contact and select Options.
2. Select Edit name and enter your changes; then select OK.
■Delete contacts list entries
1. At the start screen, select Contacts > Delete.
2. To delete individual entries, select One by one.
Contacts
29
3. Scroll to the entry you wish to delete, and select Delete > OK to confirm.
4. To delete the entire contents of your contacts list, select Delete all > OK.
5. Enter the lock code, and select OK. See "Security settings," page 62.
■Add number list entries
Add number allows you to tag each phone number entry with a phone type.
1. At the start screen, select Contacts > Add number.
2. Highlight a contact from the list and select Add.
3. Select the tag as General, Mobile, Home, Work, or Fax and enter the number.
■Settings
Settings allows you to determine how your phone numbers will be viewed and
how much memory remains in the contacts list.
At the start screen, select Contacts > Settings and one of the following:
Scrolling view—Specify how names and numbers are viewed in Contacts list.
Memory status—Determine the amount of space available in Contacts list.
■1-touch dialing
You can associate any entry in the contacts list with a key from 2–9. To dial those
entries, press and hold the assigned key. 1-touch dialing must be turned on to use
this method.
Press the assigned key and Call to 1-touch dial at any time.
Assign a key to 1-touch dialing
1. At the start screen, select Contacts > 1-touch dialing.
2. Select any empty slot and Assign.
3. Enter the number (including the area code), and select OK; or select Search to
retrieve a number from the contacts list.
4. Enter the contact name for the number, and select OK.
If 1-touch dialing is off, the device displays a prompt asking if you would like
to turn 1-touch dialing on.
Contacts
30
5. Select Yes to activate 1-touch dialing.
Change 1-touch dialing numbers
1. At the start screen, select Contacts > 1-touch dialing.
2. Select the 1-touch dialing entry you wish to change and Options > Change.
3. Enter the new number and select OK; or select Search to view the contacts
list and select a new number.
4. Enter a name for the entry, and select OK.
Delete 1-touch dialing numbers
1. At the start screen, select Contacts > 1-touch dialing.
2. Select the 1-touch dialing location you wish to delete.
3. Select Options > Delete > OK to delete the key assignment.
■Edit contacts list entries
1. At the start screen, scroll down to display the contents of your contacts list.
2. Select the entry you would like to edit and Details.
Edit phone number
1. Highlight the phone number you would like to edit, and select Options.
2. Select one of the following options and select OK.
Add voice tag—Add a voice tag to the contact.
Edit number—Edit an existing phone number of the contact.
Delete number—Delete a phone number from the contact.
Use number—Display the phone number on the start screen, ready to be
called.
View—View the details of the contact.
Change type—Change the number type to General, Mobile, Home, Work, or
Fax.
As primary no.—Change the default number of the contact.
Contacts
31
Add number—Add a number to the contact.
Add detail—Add an address or note to the contact.
Caller groups—Add the contact to an existing caller group.
Custom tone—Add a custom ring tone to the contact.
Send bus. card—Send the contact as a business card to another phone.
Send message—Create and send a message to the contact.
1-touch dialing—Add the contact to your 1-touch dialing list.
Edit name—Edit the name of the contact.
View name—View the name of the contact.
Delete—Delete the entire contact entry from your contacts list.
E-mail address entry
1. Highlight the e-mail address entry you would like to send or update, and
select Options.
2. Select one of the following options and OK.
Send e-mail—Send an e-mail.
Edit detail—Edit existing details of e-mail.
Delete detail—Delete existing e-mail.
View—View the details of the e-mail contact.
Change type—Change the e-mail type to Web address, Street address:, or
Note.
Add number—Add a number to the entry.
Add detail—Add an address or note to the entry.
Caller groups—Add the e-mail to an existing caller group.
Custom tone—Add a custom ring tone to the contact.
Send bus. card—Send the contact a business card.
Edit name—Edit the name of the contact.
View name—View the name of the contact.
Delete—Delete the entire e-mail entry from your contacts list.
Contacts
32
Edit other text items
1. Highlight the address entry you would like to edit, and select Options.
2. Select the option you wish to perform and OK.
■Voice tags
Voice tags allow you to dial a contact by speaking. You can also playback,
change, or delete voice tags.
Voice dialing
You can dial up to 25 stored numbers using voice dialing.
Before using voice tags, note the following:
• Voice tags are not language dependent. They are dependent on the speaker’s
voice.
• You must say the name exactly as you said it when you recorded it.
• Voice tags are sensitive to background noise. Record voice tags and use them
in a quiet environment.
• Very short names are not accepted. Use long names, and avoid similar names
for different numbers.
Using voice tags may be difficult in a noisy environment or
during an emergency, so you should not rely solely upon voice dialing in all
circumstances.
Assign a voice tag to an entry
Before you can use voice dialing, you must first assign a voice tag to the number.
1. At the start screen, use scroll down to enter the contacts list.
2. Highlight the contact you want to assign a voice tag, and select Details >
Options > Add voice tag.
3. Select Start; then speak clearly into the microphone.
Do not select Quit unless you want to cancel the recording.
The device automatically stops recording, saves, and replays the voice tag.
appears next to the phone numbers that have voice tags assigned.
If recording is not successful, your device displays Voice system error.
Select Options > Add voice tag, and repeat Step 3.
Contacts
33
Dial a number
1. Select and hold Contacts.
2. When you hear several beeps and Please speak now appears, release the key.
3. Pronounce the voice tag clearly into the microphone.
When the device finds the voice tag, Found: appears, and the device
automatically dials the number. If the device does not locate a number or
recognize the voice tag, No match found appears.
Voice tag options
After you have associated a voice tag to a contact, you can choose one of the
following options:
Play back
1. Select Menu > Contacts > Voice tags.
2. Scroll to the name with the voice tag you want to hear.
3. Select Options > Playback.
Modify
1. Select Menu > Contacts > Voice tags.
2. Scroll to the name with the voice tag you want to change.
3. Select Options > Change.
4. Select Start, then speak clearly into the microphone. The device repeats your
voice tag, and Voice tag saved appears.
Delete
1. Select Menu > Contacts > Voice tags.
2. Scroll to the name with the voice tag you want to erase.
3. Select Options >Delete.
Delete voice tag? appears.
4. Select OK to erase the voice tag.
■My number
My number allows you to display your own phone number. Select Contacts > My
number.
Contacts
34
■Caller groups
Caller groups allows you to organize your contact information into groups. You
can add contacts list entries to any of five caller groups, and assign a unique
ringing tone or graphic to that group. This enables you to identify callers from the
group by their unique ringing tone or graphic.
Set up a group
1. At the start screen, scroll down to display a list of entries in your contacts list.
2. Select a name you would like to add to a caller group.
3. Select Details > Options > Caller groups.
4. Select the caller group to which you would like to add the name.
Caller group options
1. At the start screen, select Contacts > Caller groups > Family, VIP, Friends,
Business, or Other.
2. Scroll to highlight a group, and select one of the following caller group
options and follow the directions displayed:
Rename group—Rename the group to your preference.
Group ringing tone—Set the ringing tone for the group.
Group logo—Turn the graphic for the caller group on or off.
Group members—Add or remove members from the caller group.
■Send and receive contacts (business cards)
You can send and receive an entry in your contacts list using a text message if
supported by your wireless provider.
Send a business card
You can send a business card as a text message to a compatible phone or other
handheld device.
1. At the start screen, scroll down to display the contents of your contacts list.
2. Highlight an entry from the contacts list that you wish to send, and select
Details > Options > Send bus. card.
Contacts
35
3. To send the business card as a message, select Via text msg. > Primary no. or
All details (only if contact has more than one phone number).
4. Enter the number for your recipient, or select Search to retrieve a number
from your contacts list.
5. Select OK. The business card is sent.
Messages
36
5. Messages
If you have subscribed to a messaging service through
your wireless provider, you can send and receive messages to compatible devices
that also subscribe to a compatible message service. You may also be able to send
and receive picture messages and e-mail messages.
Important: Exercise caution opening messages. Messages may contain
malicious software or otherwise be harmful to your device or PC. Do not
open any attachment if you are not sure of the trustworthiness of the
sender.
When sending messages, your device may display Message sent. This is an
indication that the message has been sent by your device to the message center
number programmed into your device. This is not an indication that the message
has been received at the intended destination. For more details about messaging
services, check with your service provider.
■Text messages
At the start screen, select Menu > Messages > Text messages and select from
the following:
Create message—Allows you to create and send messages. Create message is
activated by the service provider.
Inbox—Allows you to check for received messages.
Sent items—Allows you to check for sent messages.
Archive—Allows you to save messages in an archive.
Templates—Includes a selection of templates for creating messages.
My folders—Allows you to create and name your personal folders.
Distribution lists—Allows you to define a group of up to 10 recipients to which
messages can be addressed.
Delete messages—Allows you to delete messages from a selected folder or all
folders.
Message settings—Includes options for changing settings for reading, writing
and sending messages.
Messages
37
Write and send
1. At the start screen, select Menu > Messages > Text messages > Create
message.
2. Select Add number to add the recipient’s phone number, Add e-mail to add
the e-mail address, or Add list to add a distribution list. You can also select
Search to retrieve a number or e-mail address from your contacts list, and OK.
3. Select Options and repeat step 2 to add more recipients, then select OK.
4. Select Options > Edit message.
5. Compose a message using the keypad, and select Options > Send.
Templates
Templates are short, prewritten messages that can be recalled and inserted into
new text messages when you are short on time.
1. At the start screen, select Menu > Messages > Text messages > Create
message > Edit message > Options > Use template.
2. Select one of the available templates.
3. Enter the text into your new message, and select Options > Send > Add
number, Add e-mail, or Add list.
4. Enter your recipient’s phone number; or select Search to retrieve a number
from your contacts list and OK.
5. Select Options > Send.
Options when creating a message
When you send a text message, depending on the mode of text input you are
using and the features supported by your wireless service provider, some or all of
the following options are available:
Preview—Previews the inserted message before sending. Select Back to return to
the list of options.
Send—Send the message to one recipient.
List recipients—Send the message to more than one recipient.
Settings—Set the priority of the message.
Save message—Select Sent items to save the message in the sent items folder;
select Templates to save the message as one of your predefined templates; select
Archive to save the message in your archive, or to a folder you created.
Messages
38
Clear text—Erase the text clipboard.
Exit editor—Save the message to your sent items folder automatically, and leave
the message editor.
Insert contact—Insert a name from your contacts list into your message.
Insert number—Insert a phone number or find a phone number in the contacts
list.
Use template—Insert a predefined template into your message.
Insert smiley—Insert the smiley face of your choice into your message.
Insert picture—Insert a picture of your choice into the message.
Change picture—Takes you back to the picture list. Scroll to highlight a new
picture, select View > Insert to replace the previous picture in your message.
Delete picture—Select OK to delete the picture from your message, or select Back
to return to the list of options.
Insert word or Edit word—Enter or edit the text of a new word that might not
appear in the predictive text dictionary. This displays only when Predictive text is
set to On.
Predictive text—Choose a predictive text language, and turn predictive text on or
off.
Insert symbol—Insert a special character into your message. This displays only
when Predictive text is set to On.
Matches—View matching words found in the dictionary for the word you want to
use.
Create a distribution list
1. At the start screen, select Menu > Messages > Text messages > Distribution
lists > Options > Add list.
2. Enter a name for the list, and select OK.
3. To add contacts to this list, select Options > Add contact.
4. Add the contacts one by one to this list.
Send a message to a distribution list
1. At the start screen, select Menu > Messages > Text messages > Create
message.
Messages
39
2. Select Add list, scroll to a distribution list, and select OK.
3. Select Options > Edit message or Edit text.
4. Compose a message using the keypad, and select Options > Send.
5. Select Options > Send.
Your message is then sent to each of the recipients in the list.
Read a message
When you receive a message, a notification message displays and is
displayed. When you have unopened messages in your inbox, is shown in the
upper left corner of the start screen as a reminder.
1. Select Show to read the message, or Exit to dismiss notification.
2. Scroll up or down to view the whole message if necessary.
Options while reading a message
When you read a text message, the following options are available:
Delete—Discard the message.
Reply—Reply to the message. Create the message, and select Options > Send. The
sender’s phone number or e-mail is used as the default
Use number—Select Save, Add to contact, Send message, or Call.
Save—Save the message to a folder.
Forward—Forward the message to another phone number.
Rename—Edit the title of the message.
Reply to a message
When you receive a message, a notification message is displayed.
1. Select Show > Options > Reply.
2. Select a reply option; then compose your reply using the keypad.
3. Select Options > Send.
To reply to a previously received message:
1. At the start screen, select Menu > Messages > Text messages > Inbox and
select a message.
2. Select Options > Reply to respond.
Messages
40
Change sending options
1. At the start screen, select Menu > Messages > Text messages > Message
settings > Sending options.
2. Select the setting you wish to change:
Priority—Select the priority of the note as Normal or Urgent.
Delivery note—A note is sent to you confirming delivery of the message.
Select On or Off.
Send callback number—A callback number is sent to the recipient. Select Off
or default phone number.
Change message settings
1. At the start screen, select Menu > Messages > Text messages > Message
settings > Other settings.
2. Select the setting you wish to change:
Message font size—Select Small font or Large font.
Message overwriting—Select Sent items only, Inbox only, S. items & Inbox, or
Off.
Save to Sent items as sending—Select Always save, Always prompt, or Off.
When the message memory is full, your device cannot send or receive any new
messages. However, you can set your device to automatically replace old
messages in the Inbox and Sent items folders when new ones arrive.
■Message folders
Save messages to folders
You can save drafts of messages or received messages to an existing folder or to a
folder that you have created.
To save a draft of a message you are creating, select Options > Save message >
Templates. To save a received message, select Options > Save message > Sent
items, Templates, Archive, or a folder you have created.
Messages
41
Save the message to another folder
While viewing a message, select Options > Save message and the destination
folder.
View saved messages
1. At the start screen, select Menu > Messages > Text messages.
2. Select the folder containing the message you wish to view.
3. When the folder opens, select the message you wish to view.
Inbox folder
Messages are automatically stored in the inbox after you read them, or if you
select Back when notification is displayed on the start screen.
Sent items folder
Messages that you have sent and messages that you have created but have not
sent are automatically stored in the sent items folder.
When sending messages, set Save to Sent items as sending to Always save or
Always prompt to ensure that your messages are saved. If Save to Sent items as
sending is set to Off, sent messages are not stored in the sent items folder. To
change the settings, select Menu > Messages > Text messages > Message
settings > Other settings.
Archive folder
Store messages that have been read in the Archive folder.
Templates folder
Pictures and prewritten templates are stored in the Templates folder. Preloaded
templates can be edited and customized.
My folders
To keep your messages organized, create custom folders and save some of your
messages there.
Messages
42
Add a folder
1. At the start screen, select Menu > Messages > Text messages > My folders >
Options > Add folder.
2. Enter a name for the new folder, and select OK.
Rename a folder
1. At the start screen, select Menu > Messages > Text messages > My folders.
Any folders that you have created are displayed.
2. Scroll to the folder you wish to rename, and select Options > Rename folder.
3. Select and hold Clear to delete the existing entry.
4. Enter the new name for the folder, and select OK to confirm or Back to exit.
Delete a folder
Only folders created in My folders can be deleted. The Inbox, Sent items, Archive,
and Templates folders are protected. When you delete a folder, all messages in
the folder are also deleted.
1. At the start screen, select Menu > Messages > Text messages > My folders.
2. Scroll to the folder you wish to remove, and select Options > Delete folder.
3. Select OK to delete or Back to exit.
■Delete messages
If your message memory is full and you have more messages waiting at the
network, blinks on the start screen. You can do the following:
• Read some of the unread messages, and delete them.
• Delete messages from some of your folders.
A single message
To delete a single message, you need to open it first.
1. At the start screen, select Menu > Messages > Text messages.
2. Select the folder containing the message you wish to delete.
3. Select the message you wish to delete.
4. Select Options > Delete > OK to delete the message or Back to exit.
Messages
43
All messages in a folder
1. At the start screen, select Menu > Messages > Text messages > Delete
messages.
2. Select the folder containing the messages you wish to delete.
All—Deletes all messages in all of the folders.
All read—Deletes any messages that have been read in all of the folders.
All unread—Deletes any messages that have not been read in all of the
folders.
Inbox—Deletes all messages from the Inbox folder.
Sent items—Deletes all messages from the Sent items folder.
Archive—Deletes all messages from the Archive folder.
User defined folders—All user defined folders that the user has added under
My folders are displayed at the end of the predefined folders.
3. Select OK to empty the folder.
■Voice messages
If you subscribe to voice mail, your wireless provider will furnish you with a voice
mailbox number. You need to save this number to your device to use voice mail.
When you receive a voice message, your device displays a notification and may
beep or vibrate. If you receive more than one message, your device shows the
number of messages received.
Save voice mailbox number
Your wireless provider may have already saved your voice mailbox number to
your device. If so, the number will appear in the display in step 2. Select OK to
leave the number unchanged.
1. At the start screen, select Menu > Messages > Voice messages > Voice
mailbox number.
2. If the box is empty, enter the voice mailbox area code and number.
3. Select OK.
Messages
44
Call and set up your voice mail
1. When you have saved the voice mailbox number, press and hold 1.
2. When you connect to voice mail and the prerecorded greeting begins, follow
the automated instructions to set up your voice mail.
Listen to your voice messages
You can dial your voice mailbox number in one of these ways:
• Dial the number using the keypad.
• Press and hold 1.
• Select Listen if there is a notification message in the display.
• At the start screen, select Menu > Messages > Voice messages > Listen to
voice messages.
When you connect and the prerecorded greeting begins, follow the
automated instructions to listen to your voice messages.
Automate voice mail
You can insert special characters called dialing codes into phone numbers such
as voice mail, and save the number to a 1-touch dialing location. Dialing codes
instruct the receiving system to pause, wait, bypass, or accept the numbers that
follow them in the dialing string.
Voice mail services vary by service provider. The following instructions are
examples of common operations. Please check with your service provider for
specific instructions for using your voice mail service.
Voice mailbox number and process
1. Write down your voice mailbox number.
2. Call and check your voice mail as you normally would.
3. Write down your step-by-step interaction with the recorded prompts.
Remember that each voice mail service varies. Your steps may resemble the
following:
Dial 2145551212, pause 5 seconds, press 1, pause 2 seconds, press 1234
and *.
Messages
45
Be precise; you need this information to set up your voice mail with dialing
codes.
Dialing codes
Press * repeatedly to cycle through dialing codes. When the desired code appears
in the display, pause briefly and the code is inserted into the dialing string.
The following dialing codes are available:
Set up voice mail with dialing codes
1. At the start screen, select Contacts > 1-touch dialing.
2. Scroll to an empty 1-touch dialing slot, and select Assign.
3. Enter your voice mailbox number, including the area code.
4. Refer to dialing codes, and enter codes as necessary using the information
that you saved from "Voice mailbox number and process," page 44.
For example, if you pause for 5 seconds after connecting to voice mail, enter p
twice after the voice mailbox number (for example, 2145551212pp).
5. Enter any remaining pauses or other information that allows you to listen to
your messages, and select OK.
6. Enter a name (such as voice mail), and select OK.
To dial and listen to your voice mail, press and hold the assigned 1-touch dialing
key at the start screen.
Dialing code Indicates...
* Bypasses a set of instructions.
+ Causes the International access code to be re-
placed by +.
p Pauses for 2.5 seconds before sending any
numbers that follow.
w Waits for you to press Call before sending the
numbers or codes that follow.
Messages
46
■Picture messages
Picture messaging is a network service. If your wireless service provider supports
this feature, your device comes with five preloaded pictures. You can, however,
over-write any of the five pictures that come with your device. Pictures can be
attached to a message and sent using text messaging to compatible devices or
PCs. Picture messages behave the same as text messages, but pictures take up
more space than text. Pictures are stored in the Templates folder at Menu >
Messages >Text messages > Templates.
Note: Picture message function can be used only if it is supported by your
network operator or service provider. Only compatible devices that offer picture
message features can receive and display picture messages.
Copyright protections may prevent some images, ringing tones, and other
content from being copied, modified, transferred, or forwarded.
Write and send
When a picture is added to a text message, the message converts to picture
message. The message counter in the upper right of your display shows the
characters available for you to type in.
1. At the start screen, select Menu > Messages > Text messages > Create
message > Edit message.
2. Write a message using the keypad (or enter nothing if you choose to just send
a picture), and select Options > Insert picture.
3. Scroll down through the pictures, and select View.
4. Select Insert to insert the picture into your message; otherwise select Back,
scroll to another picture, and select View again.
5. To send the picture message, select Options >Send.
6. Select Add number.
7. Enter the phone number for your recipient, or select Search to retrieve a
number from the contacts list and OK.
8. Select Options > Send.
Note: Picture images are not saved in Sent items.
Note: Pictures can only be received via SMS.
Messages
47
View a picture message
When you receive a picture message, appears in the display.
1. Select Show to view the picture message, or select Exit to move it to your
inbox.
2. If you have more than one picture message, select the message of your
choice.
When you have unopened picture messages in your inbox, appears in the
upper left corner of the start screen as a reminder.
3. Scroll to view the whole picture if necessary.
4. Once you are finished, select Back to move the picture message to the Inbox
or Options for other choices such as Reply or Forward.
If you want to save the picture to your Templates folder for later use, select
Options > Save picture. Enter a title for the picture, and select OK.
If your templates folder is full of pictures, select the picture you want to replace.
■Minibrowser messages
Minibrowser messaging is a network service. See "Network Services," page 9.
If your wireless service provider supports this feature, you can check for e-mail
messages using the minibrowser. At the start screen, select Menu > Messages >
Minibrowser > Connect.
For information on using the Minibrowser in your device to access web pages, see
"Minibrowser," page 77.
Call log
48
6. Call log
Call log stores information about the last 20 missed, 20 received, or 20 dialed
calls. It also adds the total duration of all calls. When the number of calls exceed
the maximum, the most recent call replaces the oldest.
Whether viewing missed, received, or dialed calls, the menu options are the
same:
Call time—Display the date and time of the call.
Send message—Send a message to the number.
View number—Display the number.
Use number—Make a call using the number.
Edit number—Edit the number and associate a name with the number.
Save—Enter a name for the number and save it to your contacts list.
Add to contact—Add the number to an existing entry in your contacts list, if the
number is not associated with a name.
Delete—Clear the number from memory.
Call—Call the number.
■View missed calls
Missed calls are calls that were either dismissed or never answered. The missed
calls feature does not function when your device is switched off.
1. If a missed call notification appears in the display, select List; otherwise, from
the start screen, select Menu > Call log > Missed calls.
2. When the phone number appears in the display, select Options.
3. Select an option.
■View received calls
Received calls are calls that have been answered.
1. At the start screen, select Menu > Call log > Received calls.
2. Select a name or number and Options.
3. Select an option.
Call log
49
■Dialed numbers
Dialed calls are previous numbers you have dialed from your device:
1. At the start screen, press Call, or select Menu > Call log > Dialed numbers.
2. Select a name or number and Options.
3. Select an option.
Call times
You can make or receive calls to or from the same number and view the time each
call occurred. Your clock must be set for this feature to work accurately.
1. While viewing a missed, received, or dialed call, select Options > Call time.
2. Scroll down to view the most recent call times from this number.
3. Select Back to return to the options list.
■Delete call logs
You can delete any missed, received, or dialed calls from device memory.
1. At the start screen, select Menu > Call log > Delete recent call lists.
2. Select the call type you would like to clear: All, Missed, Received, or Dialed.
■Duration of calls
The actual time invoiced for calls and services by your service provider may vary,
depending on network features, rounding off for billing, taxes, and so forth.
Last call
At the start screen, select Menu > Call log > Call timers > Duration of last call for
more information.
Show call time on display
At the start screen, select Menu > Call log > Call timers > Duration of last call >
Details > Show call time on display, and set to On or Off.
Call log
50
Dialed calls
At the start screen, select Menu > Call log > Call timers >Duration of dialed
calls > Details for more information.
Received calls
At the start screen, select Menu > Call log > Call timers >Duration of received
calls > Details for more information.
All calls
At the start screen, select Menu > Call log > Call timers >Duration of all calls for
more information.
Life timer
At the start screen, select Menu > Call log > Call timers >Life timer.
Some timers, including the life timer, may be reset during service or software
upgrades.
Clear timers
At the start screen, select Menu > Call log > Call timers >Clear timers, enter your
lock code, and select OK.
■Duration of data and fax calls
Data and fax calls are a network service. See "Network Services," page 9 for more
information. If your wireless service provider supports this feature, you can view
the size or duration of sent or received data and fax calls.
The actual time invoiced for calls and services by your service provider may vary,
depending on network features, rounding off for billing, taxes, and so forth.
At the start screen, select Menu > Call log > Data/fax calls and scroll to one of
the following options:
Last sent data/fax—View the size (kB) of the last send data or fax call.
Last received data/fax—View the size (kB) of the last received data or fax call.
All sent data/fax—View the size (kB) of all sent data and fax calls.
Duration of last data/fax call—View the duration time of the last data or
fax call.
Call log
51
All received data/fax—View the size (kB) of all received data and fax calls.
Duration of all data/fax calls—View the duration time of all calls.
Clear all data/fax logs—Select OK > Yes to clear all data and fax registers.
■Duration of minibrowser
Minibrowser is a network service and is a carrier dependent feature. See
"Network Services," page 9. If your wireless service provider supports this feature,
you can view the size or duration of sent or received data from the Minibrowser.
The actual time invoiced for calls and services by your service provider may vary,
depending on network features, rounding off for billing, taxes, and so forth.
1. At the start screen, select Menu > Messages > Minibrowser messages.
2. Scroll to one of the following options:
Last sent browser data—View the size (kB) of the last send browser data.
Last received browser data—View the size (kB) of the last received data.
All sent browser data—View the size (kB) of all sent browser data.
All received browser data—View the size (kB) of all received browser data.
Last browser session—View the duration time of the last browser session.
All browser sessions—View the duration time of all browser sessions.
Clear all browser logs—Select OK > Yes to clear all browser registers.
Settings
52
7. Settings
Use this menu to set or change profiles, tone settings, call settings, phone
settings, time and date settings, enhancement settings, security settings,
network settings, or to restore the factory settings.
■Profiles
Profiles define how your device reacts when you receive a call or message, how
your keypad sounds when you press a key, and more. Ringing options, keypad
tones, and other settings for each of the available profiles can be left at their
default setting, or customized to suit your needs. The following profiles are
available: Normal, Silent, Meeting, Outdoor, and Pager.
Profiles are also available for enhancements such as a headset and car kit. See
"Enhancement settings," page 62.
Activate
1. At the start screen, select Menu >Settings > Profiles.
2. Select the profile of your choice.
3. Select Activate.
Personalize a profile
You can personalize any of the profiles a variety of ways.
1. At the start screen, select Menu >Settings > Profiles.
2. Select the profile you wish to customize.
3. Select Customize.
4. Select the option you want to customize: Incoming call alert, Ringing tone,
Ringing volume, Vibrating alert, Light alert, Message alert tone, Keypad tones,
Warning tones, Alert for, or Profile name.
You cannot rename the Normal profile.
Select Alert for to set the phone to ring only upon calls from phone numbers that
belong to a selected caller group. Scroll to the caller group you want or All calls,
and select Mark or Unmark > Done. To set the phone to ring for every call, select
All calls > Mark > Done.
Settings
53
Set a timed profile
Timed profiles can be used to prevent missed calls. For example, you attend an
event that requires your device be set to Silent before the event starts, but you
forget to return it to Normal until long after the event. A timed profile can
prevent missed calls by returning your device to the default profile at a time you
specify.
Timed profiles can be set up to 24 hours in advance.
1. At the start screen, select Menu >Settings > Profiles.
2. Select the profile you wish to activate and set for timed expiration.
3. Select Timed.
4. Enter the time for the profile to expire, and select OK.
■Tone settings
From this menu, you can adjust the ringing volume, keypad tones, and other tone
settings for the currently active profile. You can also set the device to ring for
calls from phone numbers that belong to a selected caller group. See "Personalize
a profile," page 52.
■Call settings
Location info sharing
Location info sharing is only available for the Nokia 2115i phone. Location info
sharing is a network service. See "Network Services," page 9.
If your wireless service provider supports this feature, location info sharing
allows the phone to share position information over the network. For calls to
emergency numbers, this position information may be used by the emergency
operator to determine the position of the phone. The functionality and accuracy
of this feature is dependent on the network, satellite systems, and the agency
receiving the information. It may not function in all areas or at all times.
At the start screen, select Menu > Settings > Call settings > Location info
sharing >Emergency or On > OK > OK.
Emergency—This is the default profile. The phone location information is shared
only during an emergency call to the official emergency number programmed
into your phone. The phone screen displays in the upper, left-hand corner of
the start screen.
Settings
54
On—The phone location information is shared with the network whenever the
phone is powered on and activated. The screen displays in the upper
left-hand corner of the start screen.
Location information will always be shared with the network during emergency
calls to the official emergency number programmed into the phone, regardless of
which setting is selected. After placing an emergency call, the phone remains in
emergency mode for five minutes. During this time, the location information will
be shared with the network. See "Emergency calls," page 88.
Anykey answer
Anykey answer allows you to answer an incoming call: briefly press any key
except the Power key, Right selection key, or End key.
At the start screen, select Menu > Settings > Call settings > Anykey answer > On
or Off.
Automatic redial
Occasionally, your network may experience heavy traffic, resulting in a fast busy
signal when you dial. With automatic redial activated, your device redials the
number until the call is successful, or is terminated.
At the start screen, select Menu > Settings > Call settings > Automatic redial >
On or Off.
1-touch dialing
You can activate or deactivate 1-touch dialing. At the start screen, select Menu >
Settings > Call settings > 1-touch dialing > On or Off. See "1-touch dialing,"
page 29.
Auto-update of service
This feature is a network service. Your device is capable of receiving updates to
network services sent to your device by your service provider.
At the start screen, select Menu > Settings > Call settings > Auto-update of
service > On or Off.
Settings
55
Minibrowser confirmation
You can specify whether or not you want your device to display messages when
you begin or end a browser session.
1. Select Menu > Settings > Call settings >Minibrowser confirmation.
2. Select one of the following options:
None—No confirmation notes are displayed.
Both—Confirmation required before connecting to the Internet and before
you terminate a browser session.
On connection—Device asks you to confirm your awareness to possible
charges incurred for Internet access.
On exit—Device asks you to confirm your wish to end browsing.
Calling card
If you use a calling card for long distance calls, you can save the calling card
numbers in your device. Your device can store up to four calling cards.
Save information
1. At the start screen, select Menu > Settings > Call settings > Calling card.
2. Enter your lock code, and select OK.
3. Scroll to one of the four memory locations, and select Options > Edit >
Dialing sequence.
4. Select one of the following sequence types:
Access no. + phone no. + card no.—Dial the calling card access number, phone
number, card number, and PIN, if required.
Access no. + card no. + phone no.—Dial the calling card access number, card
number, PIN (if required), and phone number.
Prefix + phone no. + card no.—Dial the prefix (numbers that must precede the
phone number), phone number, card number, and PIN (if required).
5. Enter the required information (access number or prefix and card number),
and select OK to confirm your entries.
6. Select Card name.
Settings
56
7. Enter the card name, and select OK.
Contact your calling card company for more information.
Make calls
After you have saved your calling card information in your device, you can make a
call using your calling card.
1. At the start screen, select Menu > Settings > Call settings > Calling card.
2. Enter your lock code, and select OK. (See "Change the lock code," page 63.)
3. Scroll to the calling card of your choice, and select Options > Select > OK.
4. Press End to return to the start screen; then enter the phone number,
including any prefix (such as 0 or 1) that your calling card may require when
you make a calling card call. See your calling card for instructions.
5. Press and hold Call for a few seconds until Card call is displayed.
6. When you hear the tone or system message, select OK.
International prefix
You can store an international dialing prefix into your device. When you enter
+ at the beginning of a phone number, your device automatically inserts the
international dialing prefix that you have stored.
1. At the start screen, select Menu > Settings > Call settings > International
prefix.
2. Enter the international dialing prefix (for example, 0011) and select OK.
3. At the start screen, press * twice to use + and enter the phone number you
wish to call, for example, +3546789.
The device dials the international dialing prefix you have stored in your device
and the phone number you have entered (for example, the device dials
00113546789).
Data and fax calls
Data or fax calls is a network service. See "Network Services," page 9.
If your wireless service provider supports this feature, you can set up the device
to send or receive data or fax calls when a terminal, such as a PDA or PC, is
connected.
Settings
57
For better performance during data calls, place the device on a stationary
surface. Do not move the device by holding it in your hand during a data call.
For more information on connectivity, see the PC/PDA Connectivity Guide.
The PC/PDA Connectivity Guide can be downloaded from the Nokia web site at
http://www.nokiausa.com/us.
1. At the start screen, select Menu > Settings > Call settings > Data/fax calls >
Incoming data/fax call and one of the following options:
Normal—The device receives incoming calls as usual.
Data calls only—The device receives only data calls.
Fax calls only—The device receives only fax calls.
2. When you are finished receiving the fax or data call, repeat Steps 1 and 2 and
select Normal.
Data transfer
To view the transmission speed when sending or receiving data or fax calls, at the
start screen, select Menu > Settings > Call settings > Data/fax calls > Data rate
display > Graphic or Off.
Call Summary
Your device can display the time spent on a call when you hang up.
At the start screen, select Menu > Settings > Call settings > Call summary > On
or Off.
■Phone settings
Phone language
1. At the start screen, select Menu > Settings > Phone settings > Phone
language.
2. Select the language of your choice.
The language setting may affect the time and date formats of the clock, alarm
clock, and calendar.
Settings
58
Automatic keyguard
You can set the keypad of your device to lock automatically after a preset time
delay.
1. At the start screen, select Menu > Settings > Phone settings > Automatic
keyguard > On or Off.
2. If you select On, Set delay is displayed.
3. Enter the delay (in minutes and seconds), and select OK.
When keyguard is on, it may be possible to dial the emergency number
programmed into your device.
Touch tones
Touch tones are the tones that sound when you press the keys on your device
keypad. You can use touch tones for many automated dial-up services such as
banking and airlines or for entering your voice mailbox number and password.
Touch tones are sent during an active call. You can send them manually from
your device keypad, or send them automatically by saving them in your device.
Set type
1. At the start screen, select Menu > Settings > Phone settings > Touch tones >
Manual Touch tones.
2. Select one of the following options:
Continuous—The tone sounds for as long as you press and hold a key.
Fixed—Used to send tones of the duration you specify in the Touch tone
length option.
Off—Used to turn off tones. No tones are sent when you press a key.
Set length
You can also specify touch tone length when using the Fixed option.
At the start screen, select Menu > Settings > Phone settings > Touch tones >
Touch tone length > Short (0.1 second) or Long (0.5 second).
Welcome note
You can write a welcome note which briefly appears on the display screen, if
provided by your service provider, whenever you switch your device on.
Settings
59
Predictive text input is not available for entering Welcome note text.
1. At the start screen, select Menu > Settings > Phone settings > Welcome note.
2. Enter a note (up to 44 characters).
Press * to display and select from available special characters.
3. When you are finished, select Options > Save.
Select Delete if you want to delete the previous text and begin creating another
welcome note.
Banner
Banner is a network service. See "Network Services," page 9.
If your wireless service provider supports this feature, you can choose whether
the display shows the operator logo or your own banner in text when the device
is in the idle state.
At the start screen, select Menu > Settings > Phone settings >Banner >Default
or Customize.
Help text activation
Your device displays brief descriptions for most menu items. When you arrive at a
feature or menu, pause for about 10 seconds, and wait for the help text to
display. Scroll through the full help text, if necessary.
The default setting for help text is on. However, you can turn help text on or off.
At the start screen, select Menu > Settings > Phone settings > Help text
activation > On or Off.
Display brightness
You can change the brightness of your device display.
1. At the start screen, select Menu > Settings > Phone settings > Display
brightness.
2. Scroll up and down to adjust the brightness level to your preference.
3. Select OK to accept your settings.
Settings
60
■Time and date settings
Time
Show or hide the clock
At the start screen, select Menu > Settings > Time and date settings > Clock >
Show clock or Hide clock.
Set the time
1. At the start screen, select Menu > Settings > Time and date settings > Clock >
Set the time.
2. Enter the time in hh:mm format, and select OK.
3. Select am or pm (only when the 12-hour format is in use).
Change the format
At the start screen, select Menu > Settings > Time and date settings >Clock >
Time format > 24-hour or 12-hour.
Date
Show or hide the date
At the start screen, select Menu > Settings > Time and date settings >Date >
Show date or Hide date.
Set the date
1. At the start screen, select Menu > Settings > Time and date settings >Date >
Set the date.
2. Enter the date, and select OK.
Change the date format
1. At the start screen, select Menu > Settings > Time and date settings > Date >
Date format and the format of your choice.
2. With Date on the display, select Date separator and the separator of your
choice.
Settings
61
Set the auto-update
Auto-update is a network service. See "Network Services," page 9.
If your wireless service provider supports this feature, you can allow the digital
network to set the clock, which is useful when you are out of your home area (for
example, when you travel to another network or time zone).
At the start screen, select Menu > Settings > Time and date
settings >Auto-update of date & time > On, Confirm first, or Off.
If you use the Auto-update of date & time option while outside your digital
network, you may be prompted to enter the time manually. Network time will
replace the time and date when you re-enter your digital network.
If your battery is removed or discharged outside the digital network, you may be
prompted to enter the time manually (once the battery is replaced or recharged
and you are still outside of the digital network).
■Voice commands
You can set as many as five voice commands, which allow hands-free operation
of certain device features.
Add a voice command
Before using a voice command, you must add the command to the device
function.
1. At the start screen, select Menu > Settings > Voice commands.
2. Select the device function you wish to tag: Profiles, Voice mailbox, Voice
recorder, or Call log.
3. If necessary, select an option associated with that function, and select
Options > Add command.
4. Select Start, and speak the voice command clearly into the microphone.
Do not select Quit unless you want to cancel the recording.
The device replays then saves the recorded command. appears next to
functions that have voice commands assigned.
Settings
62
Activate a voice command
After you have associated a voice command with a device function, you can
request the function by speaking the voice command.
1. Select and hold Contacts.
2. When Please speak now appears, pronounce the voice command clearly into
the microphone.
When the device finds the voice command, Found appears, and the device plays
the recognized voice command through the earpiece. The function you requested
is activated.
Voice command options
After you have associated a voice command with a function, select one of the
following options:
Playback—Listen to the voice command.
Change—Change the voice command.
Delete—Erase the voice command.
■Enhancement settings
The enhancement settings menu is shown only if the device has been connected
to a compatible enhancement.
At the start screen, select Menu > Settings > Enhancement settings > Headset,
Handsfree, Loopset, TTY/TDD, or Charger and the desired accessory.
■Security settings
Phone lock
The phone lock feature protects your device from unauthorized outgoing calls or
unauthorized access to information stored in the device. When phone lock is
activated, Phone locked is displayed each time you turn your device on.
When the device is locked, calls still may be possible to the official emergency
number programmed into your device.
1. At the start screen, select Menu > Settings > Security settings > Phone lock.
2. Enter the lock code, and select OK.
Settings
63
3. Select one of the following options:
On turns the phone lock feature on immediately after the device is turned off
and then on.
Off immediately turns off the phone lock feature.
Call not allowed is displayed if you attempt to place a call while the device is
locked.
To answer a call with phone lock on, select Answer, or press Call.
Allowed phone number when phone locked
When phone lock is on, the only outgoing calls that can be made are to the
emergency number programmed into your device (for example, 911 or other
official emergency number) or the number stored in the Allowed number when
phone locked location.
1. At the start screen, select Menu > Settings > Security settings > Allowed
number when phone locked.
2. Enter the lock code, and select OK.
3. Enter the phone number; or select Search, recall the number from the phone
book, and select OK.
Change the lock code
Tip: Avoid using codes similar to emergency numbers such as 911 to prevent
accidental dialing of the emergency number.
The lock code controls access to features and is supplied with the device. The
preset lock code is the last four digits of your phone number. When you change
the lock code, keep the new code secret and in a safe place separate from your
device.
1. At the start screen, select Menu > Settings > Security settings > Change lock
code.
2. Enter the current lock code (the default is the last four digits of your phone
number), and select OK.
3. Enter the new lock code (5 characters), and select OK.
4. Reenter the new lock code for verification, and select OK.
Settings
64
Restrict calls
Call restriction is a network service. See "Network Services," page 9.
If your wireless service provider supports this feature, you can restrict the calls
your device can make and receive. When calls are restricted, calls still may be
possible to the official emergency number programmed into your device.
1. At the start screen, select Menu > Settings > Security settings > Call
restrictions.
2. Enter the lock code, and press OK.
3. Select the types of calls you wish to restrict:
Restrict outgoing calls—Calls cannot be made.
Restrict incoming calls—Calls cannot be received.
4. Select one of the following options:
Select—Restricts a specific number or All calls. Select Mark to enable a
restriction.
Add restriction—Enter a specific number and name, or select Search to enter a
number from the contacts list.
Edit—Allows you to edit previously entered restricted numbers.
Delete—Allows you to delete previously entered restricted numbers.
■Network
The menu options you see in your device are based on your service provider’s
network. The network determines which options actually appear in the device
menu. Check with your service provider for more information.
The Network menu allows you to customize the way your device chooses a
network in which to operate while you are within or outside of your primary or
home system. Your device is set to search for the most cost-effective network. If
your device cannot find a preferred network, it selects a network automatically
based on the option you choose in the Network.
Roaming options
You can set your device to roam or search for another network when you are not
in your home area.
1. At the start screen, select Menu > Settings > Network > Roaming options.
Settings
65
2. Select one of the following:
Home only—You can make and receive calls in your home area only.
Automatic—The device automatically searches for service in another digital
network. If one is not found, the device uses analog service. The roaming rate
applies when not in the home service area.
3. Press OK, if necessary, to confirm the activation.
■Network services features
The following features are network services. See "Network Services," page 9.
Store a feature code
1. At the start screen, select Menu > Settings > Network services > Network
feature setting.
2. Enter the feature code from your service provider (for example, *900 to
activate Forward if busy), and select OK.
3. Select Call forwarding.
4. Scroll to the type of forwarding that matches the feature code you entered
(for example, Forward if busy), and select Activate.
The activated feature code is now stored in your device, and you are returned to
the Feature code: field. Continue entering other feature codes (for example, *900
to cancel Forward if busy), or press End to return to the start screen.
When you enter a network feature code successfully, the feature becomes visible
in the Network services menu.
Call forward
Call forward tells your network to redirect incoming calls to another number. Call
forward is a network service and may not work the same in all networks, so
contact your wireless provider for availability.
Activate
This is a network service. All options listed may not appear in the display. Contact
your wireless provider for more information.
1. At the start screen, select Menu > Settings > Network services > Call
forwarding.
Settings
66
2. Select one of the following options:
Forward all calls—Forwards all calls to the number you specify.
Forward if busy—Forward incoming calls when you are in a call.
Forward if not answered—Forward incoming calls to another number if you
are unable to answer. You can set a delay before forwarding takes place.
Forward if out of reach—Forward incoming calls when your device is off.
Forward all data calls—Forward incoming data calls to the number you
specify.
Cancel all call forwarding—Cancel any call forwarding options you have set.
3. Select Activate.
4. Enter the number to which your calls, data, or other information will be
forwarded; and select OK.
Cancel
At the start screen, select Menu > Settings > Network services > Call
forwarding > Cancel all call forwarding.
Cancel all call forwarding may affect your ability to receive voice mail messages.
Contact your wireless provider for specific details.
Call waiting
If your wireless provider supports this feature, call waiting notifies you of an
incoming call even while you are in a call. You can then accept, decline, or ignore
the incoming call.
1. At the start screen, select Menu > Settings > Network services > Call
waiting > Activate or Cancel.
2. During a call, select Answer, or press Call to answer the waiting call.
The first call is put on hold.
3. Press End to end the active call.
Settings
67
Send my caller ID
If your wireless service provider supports this feature, then you can prevent your
number from appearing on the receiving party’s caller ID.
At the start screen, select Menu > Settings > Network services > Send my caller
ID > Yes or No.
Own number selection
At the start screen, select Menu > Settings > Network services > Own number
selection. This feature is carrier dependent.
■Restore factory settings
You can reset some of the menu settings to their original values. Data that you
have entered or downloaded is not deleted (for example, entries in your contacts
list are not affected).
1. At the start screen, select Menu > Settings > Restore factory settings.
2. Enter the lock code (the default lock code is the last four digits of your phone
number), and select OK.
Organizer
68
8. Organizer
Your device contains features to help organize your everyday life, including an
alarm clock, calendar, calculator, countdown timer, and stopwatch.
■Alarm clock
Set an alarm
The alarm clock is based on the device clock. It sounds an alert any time you
specify and works even when the device is turned off.
1. At the start screen, select Menu > Organizer > Alarm clock. If the alarm has
been previously set, select On.
2. Enter the time for the alarm in hh:mm format, and select OK.
3. Select am or pm if 12-hour format has been selected.
Alarm on appears briefly in the display, and appears on the start screen.
Alarm conditions
When the alarm sounds, your device beeps and/or vibrates (if vibrate alert is on in
the currently active profile), and lights up.
With the device on, select Stop to shut the alarm off, or select Snooze. If you
select Snooze, the alarm stops for 10 minutes, and Snooze on appears in the
display.
If you do not press a key, the alarms stops after 1 minute and snoozes for 10
minutes, then sounds again.
If the alarm time is reached while the device is switched off, the device switches
itself on and starts sounding the alarm tone. If you select Stop, the device asks
whether you want to activate the device for calls. Select No to switch off the
device or Yes to make and receive calls. Do not select Yes when wireless device
use may cause interference or danger.
Turn an alarm off
At the start screen, select Menu > Organizer > Alarm clock > Off.
Organizer
69
■Calendar
The calendar keeps track of reminders, calls you need to make, meetings, memo,
and birthdays. It can even sound an alarm for any of these events.
Monthly view provides an overview of the selected month and weeks. It also
allows you to jump to a specific date. Any days or dates that appear in bold font
contain calendar notes such as a meeting or reminder.
Open
At the start screen, select Menu > Organizer > Calendar.
You can move the cursor in some calendar views with the scroll keys.
Go to a date
1. At the start screen, select Menu > Organizer > Calendar > Options > Go to
date.
2. Enter the date (for example, 07/15/2004), and select OK.
Note a specific date
Your device asks for further information depending on the type of note you
select. You can also set an alarm for your note.
1. Go to the date for which you want to set a reminder. See "Go to a date,"
page 69.
2. From the monthly view, with the date highlighted, select Options > Make a
note.
3. Select one of the following note types:
Meeting—You are prompted to enter a subject, location, and a start and end
time. You are then given the option to set an alarm.
Call—You are prompted to enter a phone number, a name, and the time. You
are then given the option to set an alarm.
Birthday—You are prompted to enter the person’s name and year of birth. You
are then given the option to set an alarm.
Memo—You are prompted to enter a subject and an end date. You are then
given the option to set an alarm.
Organizer
70
Reminder—You are prompted to enter the subject of the reminder. You are
then given the option to set an alarm.
4. Enter your note, and select Options > Save.
View notes (day view)
After you have created some calendar notes, you can view them as follows:
1. At the start screen, select Menu > Organizer > Calendar.
2. Scroll to the date containing the note.
Any days containing notes will be in bold type.
3. Select Options > View day.
4. To view a highlighted note, select Options > View.
Options while viewing a list of notes
Select Options while viewing a day’s notes and one of the following:
The options listed below are available while viewing the body of a note.
View—View the full note.
Make a note—Create a new note for the selected date.
Delete—Delete the note.
Edit—Edit the note.
Move—Move the note to another date on your calendar.
Repeat—Enable the note to recur on a regular basis (daily, weekly, bi-weekly,
monthly, and yearly).
Tip: Repeat is not available for Birthday note.
Go to date—Jump to another date on your calendar.
Send note—Send the note to another device using text message, or in calendar
format.
Copy—Copy the note. You can then paste the note to another date.
Settings—Set the date and time, format, the day each week starts, and whether
you want your notes to auto-delete after a specified time.
Organizer
71
Send a note
1. At the start screen, select Menu > Organizer > Calendar.
2. Scroll to the date containing the note you wish to send.
Any days containing notes will be in bold type.
3. Select Options > View day.
4. Select the note you wish to send and Options > Send note > Via calendar or
Via text msg.
5. If you select Via calendar, enter the number for the recipient; or select Search
to retrieve a number from the contacts list and OK. The note is sent.
6. If you select Via text msg., select Add number.
7. Enter the number for the recipient; or select Search to retrieve a number from
the contacts list and OK.
8. Select Options > Send.
Receive notes
When you receive a calendar note, your device displays notification that the
calendar note arrived. Save the note in your calendar, and set an alarm for any
date and time.
View notes
1. When your device displays notification that the calendar note arrived,
select Show.
2. Scroll to view the entire message, if necessary.
Save notes
After viewing the calendar note, select Options > Save.
Discard notes
After viewing the calendar note, select Options > Discard.
■Voice recorder
This feature allows you to record speech or sound with your device and listen to
them later. The total available time is 60 seconds if no memos have been stored.
The maximum length of a recording depends on how much memory remains
available. The recorder cannot be used when a data call connection is active.
Organizer
72
Record speech or sound
1. At the start screen, select Menu > Organizer > Voice recorder > Record.
2. After the recorder start tone is heard, begin recording speech or sound.
3. When you are finished recording, select Stop.
4. Type in a name for the recording, and select OK. The recording is saved to the
recording list.
Options
After you have saved the recording to the Recordings list, highlight the recording
and select one of the following options:
Playback —Listen to the recording using the earpiece
Delete —Erase the recording
Edit title —Rename the recording
Add alarm —Add an alarm to the recording
■Calculator
The calculator in your device adds, subtracts, multiplies, divides, calculates the
square and the square root, changes the sign of the number entered, and
converts currency values.
This calculator has a limited accuracy and is designed for simple calculations.
1. At the start screen, select Menu > Organizer > Calculator.
2. Enter the first number in the calculation.
Press # for a decimal point if necessary.
Press * to cycle through the add (+), subtract (-), multiply (*), and divide (/)
characters. Pause briefly to select the displayed character.
3. Enter the second number in your calculation.
4. Select Options (equals is highlighted).
To perform a square or square root calculation, select Options > Square or Square
root. Select Options > Change sign to change the sign of your result.
Organizer
73
Currency converter
You can convert foreign currency to domestic or vice versa.
1. At the start screen, enter a currency amount to convert.
2. Select Options > To home or To foreign.
To home—converts foreign currency to domestic currency.
To foreign—converts domestic currency to foreign currency.
If you have not done so already, you are prompted to enter the exchange rate.
3. Enter the exchange rate (press # to insert a decimal), and select OK.
You can also edit the exchange rate at any time.
When you change base currency, you must enter the new rates because all
previously set exchange rates are set to zero.
1. At the start screen, select Menu > Organizer > Calculator > Options >
Exchange rate > Foreign unit expressed in domestic units or Domestic unit
expressed in foreign units.
Foreign unit expressed in domestic units—The number of home units it takes
to make one unit of foreign currency.
Domestic unit expressed in foreign units—The number of foreign units it takes
to make one unit of your home currency.
2. Enter the exchange rate, and select OK.
■Countdown timer
You can enter a specified time (up to 99 hours and 59 minutes). When the time
runs out, your device sounds an alarm.
The countdown timer only works when the device is on. When you turn off your
device, the timer is no longer active.
Set the countdown timer
1. At the start screen, select Menu > Organizer > Countdown timer.
2. Enter the time (in hh:mm format), and OK.
3. Enter a note for the timer, and OK.
appears on the start screen when the countdown timer is set.
Organizer
74
When the time runs out, your device sounds an alarm, displays the timer note,
and flashes its lights.
• Press any key during the alarm to stop the timer.
• After 60 seconds the timer alert expires automatically.
Change the time
After you have set the timer, you can change the time.
1. At the start screen, select Menu > Organizer > Countdown timer > Change
time.
2. Enter the new time, and select OK.
3. Leave the note as it was; or enter a new note, and select OK.
Stop the timer before the alarm sounds
After you have set the timer, you can stop the timer.
At the start screen, select Menu > Organizer > Countdown timer > Stop timer.
■Stopwatch
Your device has a stopwatch that can be used to track time. The stopwatch
displays time in hours, minutes, seconds, and fractions of a second in hh:mm:ss:s
format.
Using the stopwatch or allowing it to run in the background when using other
features increases the demand on battery power and reduces the battery life.
Split or Lap time
Use the split time function for such things as a long distance race when you need
to pace yourself.
1. At the start screen, select Menu > Organizer > Stopwatch > Split timing or
Lap timing > Start.
Split timing—You can use the split time function for such things as a long
distance race when you need to pace yourself. Select Split to note the lapsed
time. The timer continues to run and the split time appears below the running
time. Each time you select Split, the new measured time appears at the
beginning of the list.
Organizer
75
Lap timing—You can use the lap time function when you want to track how
long it takes to complete each cycle or lap. Select Lap to note the lap time.
The clock stops, then immediately from zero. The lap time appears below the
running time. Each time you select Lap, the new measured time appears at
the beginning of the list.
2. Select Stop to end timing and display total time.
Save, view or delete split and lap times
• To save a time while the clock is running select Stop > Save, enter a name for
the measurement, and select OK. If you do not enter a name, the total time is
used as the default title for the lap or split time.
• To view the last measured time, from the start screen, select Menu >
Organizer > Stopwatch > Split timing or Lap timing > Show last time.
• To browse saved times, from the start screen, select Menu > Organizer >
Stopwatch > Split timing or Lap timing > View times.
• To delete a saved time, from Stopwatch, select View times > Select > Delete
or select Delete times > One by one or Delete all.
Operation note
If you press End and return to the start screen, the clock continues to run in the
background, and appears in the upper left corner of the screen.
To return to the stopwatch, do the following:
1. At the start screen, select Menu > Organizer > Stopwatch >Continue.
2. To stop the clock, select Stop.
Games
76
9. Games
Challenge yourself or a friend to one of the fun games in your device.
Some menus listed are network services. Contact your wireless provider for more
information.
■Game settings
At the start screen, select Menu > Games > Settings > Game sounds, Game lights,
or Shakes.
■Play a game
1. At the start screen, select Menu > Games > Select game.
2. Select a game.
3. Options and submenus vary with each game. Select one of the following
options, if supported by the game:
New game—Launches a new game.
High scores—View the high scores for this game (if previously played).
Instructions—View instructions for playing the game. Select More for more
information.
Minibrowser
77
10. Minibrowser
Minibrowser is a carrier dependent feature and a network service. See "Network
Services," page 9.
Your device has a built-in browser you can use to connect to selected services on
the mobile Internet. If your wireless service provider supports this feature, then
you can view weather reports, check news or flight times, view financial
information, and much more. The web browser on your device can display
WAP-based content.
Your device may have some bookmarks loaded for sites not affiliated with Nokia.
Nokia does not warrant or endorse these sites. If you choose to access them, you
should take the same precautions, for security or content, as you would with any
Internet site.
■Mobile Internet access
Because mobile Internet content is designed to be viewed from your device, your
wireless provider is now your mobile Internet service provider as well.
Your wireless provider has created a home page and set up your browser to go to
this page when you log on to the mobile Internet. At your service provider’s home
page, you may find links to a number of other sites.
It should not be necessary to manually configure the browser on your device.
Normally this is done by your wireless provider when you have subscribed to the
feature. Contact your wireless provider if you have problems using the browser.
■Sign on to the mobile Internet
Depending on your device’s carrier, at the start screen, select Menu >
Minibrowser > Connect or Menu > My Metro.
After a brief pause, your device attempts to connect to your wireless provider’s
home page. If you receive an error message, your device may not be set up for
browsing. Contact your wireless provider to make sure that your device is
configured properly.
Minibrowser
78
■Navigate the mobile Internet
Since your device screen is much smaller than a computer screen, mobile Internet
content is displayed differently than you may be accustomed to seeing. This
section contains guidelines for using device keys to navigate a WAP site.
Device keys
• To browse the WAP site, scroll up or down.
• Select a highlighted item.
• To enter letters and numbers, press a key from 0–9.
• To enter special characters, press *.
Receive a call while online
Depending on your wireless service provider, you may still be able to receive a
voice call while using the WAP browser.
To answer the incoming call, press Call. To decline the call, press End.
After you end your voice call, the mobile Internet connection automatically
resumes.
If your wireless service provider does not support incoming calls while browsing,
then the incoming calls are automatically forwarded to voice mail.
Make an emergency call while online
You can end your data connection and then make an emergency call.
1. To close your mobile Internet connection, press End.
2. Press End as many times as needed to clear the display and ready the device
for calls.
3. Enter the emergency number for your present location (for example, 911).
Emergency numbers vary by location.
4. Press Call.
Disconnect
To close your mobile Internet connection, press and hold End.
PC Connectivity
79
11. PC Connectivity
With the PC Suite you can create and send text and picture messages and
synchronize contacts and calendar between your device and a compatible PC.
You may find more information for PC suite in the support area on the Nokia web
site, www.nokiausa.com.
Some of the features in PC Suite are carrier dependent.
■PC suite
The PC Suite contains the following features:
• Nokia Image Converter to make images usable for multimedia messages or
wallpapers and to transfer them to your device.
• Nokia Sound Converter to edit polyphonic ringing tones to be compatible
with your device and to transfer them to your device.
• Nokia Content Copier to copy information or back up information from your
device to the PC or to another compatible Nokia device.
• Nokia Phone Editor to send text messages and edit the contacts directory and
message settings of your device.
• Nokia PC Sync to synchronize the contacts directory and calendar between
your device and a compatible PC.
• Nokia Connection Manager to select the connection type between the PC and
the device.
• Nokia Phone Browser to copy images and tones from your device to your PC
and vice versa.
Copyright protection may prevent some images, ring tones, and other content
from being copied, modified, transferred, or forwarded.
Enhancements
80
12. Enhancements
Check the model number of any charger before use
with this device. This device is intended for use when
supplied with power from a Nokia ACP-7, Nokia
ACP-12, Nokia AC-1, or Nokia LCH-12 charger.
Your device contains a Standard 1070-mAh LI-Ion Battery (BL-6C).
Warning: Use only batteries, chargers and enhancements approved by
Nokia for use with this particular model. The use of any other types may
invalidate any approval or warranty, and may be dangerous. For
availability of approved enhancements, please check with your dealer.
For availability of approved enhancements, please check with your dealer.
A few practical rules about accessories and enhancements:
• Keep all accessories and enhancements out of the reach of small children.
• When you disconnect the power cord of any accessory or enhancement, grasp
and pull the plug, not the cord.
• Check regularly that enhancements installed in a vehicle are mounted and
are operating properly.
• Installation of any complex car enhancements must be made by qualified
personnel only.
Power
• Standard 1070-mAh LI-Ion Battery (BL-6C)
• Standard Charger (ACP-7)
• Travel Charger (ACP-12)
• Retractable Charger (AC-1)
• Mobile Charger (LCH-12)
Headset and Audio
• Boom Headset (HDB-4)
• Ear Bud Headset (HS-5)
• Retractable Headset (HS-10)
• Inductive Loopset (LPS-4)
Enhancements
81
• TTY/TDD adapter (HDA-10)
Car and Desk Stand
• Desk Stand (DCV-14)
• Easy-to-use Handsfree (HF-3)
• Headrest Handsfree (BHF-3)
Miscellaneious
• Data Cable (CA-42)
• Xpress-on Color Covers
• Carry Case
See www.nokia.com/phones for more information about enhancements.
Battery information
82
13. Battery information
This section provides information about batteries, chargers, safety guidelines and
technical information. Be aware that the information in this section is subject to
change as batteries and chargers change.
■Charging and discharging batteries
Your device is powered by a rechargeable battery. The full performance of a new
battery is achieved only after two or three complete charge and discharge cycles.
The battery can be charged and discharged hundreds of times but it will
eventually wear out. When the talk and standby times are noticeably shorter
than normal, replace the battery. Use only Nokia approved batteries, and
recharge your battery only with Nokia approved chargers designated for this
device.
Unplug the charger from the electrical plug and the device when not in use. Do
not leave a fully charged battery connected to a charger, since overcharging may
shorten its lifetime. If left unused, a fully charged battery will lose its charge over
time.
Use the battery only for its intended purpose. Never use any charger or battery
that is damaged.
Do not short-circuit the battery. Accidental short-circuiting can occur when a
metallic object such as a coin, clip, or pen causes direct connection of the
positive (+) and negative (-) terminals of the battery. (These look like metal strips
on the battery.) This might happen, for example, when you carry a spare battery
in your pocket or purse. Short-circuiting the terminals may damage the battery
or the connecting object.
Leaving the battery in hot or cold places, such as in a closed car in summer or
winter conditions, will reduce the capacity and lifetime of the battery and its
ability to charge. Always try to keep the battery between 59°F and 77°F (15°C and
25°C). A device with a hot or cold battery may not work temporarily, even when
the battery is fully charged. Battery performance is particularly limited in
temperatures well below freezing.
Do not dispose of batteries in a fire, as they may explode. Batteries may also
explode if damaged. Dispose of batteries according to local regulations. Please
recycle when possible. Do not dispose as household waste.
Battery information
83
■Nokia battery authentication guidelines
Always use original Nokia batteries for your safety. To check that you are getting
an original Nokia battery, purchase it from an authorized Nokia dealer, look for
the Nokia Original Enhancements logo on the packaging, and inspect the
hologram label using the following steps.
Successful completion of the four steps is not a total assurance of the
authenticity of the battery. If you have any reason to believe that your battery is
not an authentic original Nokia battery, you should refrain from using it and take
it to the nearest authorized Nokia service point or dealer for assistance. Your
authorized Nokia service point or dealer will inspect the battery for authenticity.
If authenticity cannot be verified, return the battery to the place of purchase.
How do you check the security features on batteries with hologram labels?
1. When looking at the hologram label, you should
see the Nokia connecting hands symbol from one
angle and the Nokia Original Enhancements logo
when looking from another angle.
2. When you angle the hologram. to the left, right,
down, and up sides of the logo, you should see 1, 2, 3,
and 4 dots on each side respectively.
3. Scratch the side of the label to reveal a 20-digit
code, for example, 12345678919876543210. Turn the
battery so that the numbers are facing upwards. The
20-digit code reads starting from the number at the
top row followed by the bottom row.
4. Confirm that the 20-digit code is valid by verifying
it at the Nokia website. Go to www.nokia.com/
batterycheck and follow the instructions.
You should receive a message indicating whether the code can be authenticated.
Battery information
84
What if your battery is not verified as authentic?
If you cannot confirm that your Nokia battery with the hologram label is an
authentic Nokia battery, please do not use the battery, but take it to the nearest
authorized Nokia service point or dealer for assistance. The use of a battery that
is not approved by the manufacturer may be dangerous and may result in poor
performance and damage to your device and its enhancements. It may also
invalidate any approval or warranty applying to the device.
To find out more about original Nokia batteries visit www.nokia.com/battery.
■Charging times
The following charging times are approximate with the BL-6C 1070 mAh Li-Ion
battery:
Travel Charger (ACP-12): up to 1 hour 45 minutes
Standard Travel Charger (ACP-7): up to 3 hours 45 minutes
■Talk and standby times
Operation times are estimates only and depend on signal strength, phone use,
network conditions, features used, battery age and condition (including charging
habits), temperatures to which the battery is exposed, and many other factors.
Talk time: 3.7 up to 4.6 hours
Standby time: 139 up to 212 hours
Care and maintenance
85
Care and maintenance
Your device is a product of superior design and craftsmanship and should be
treated with care. The suggestions below will help you protect your warranty
coverage.
• Keep the device and all of its parts and accessories out of the reach of small
children.
• Keep the device dry. Precipitation, humidity and all types of liquids or
moisture can contain minerals that will corrode electronic circuits. If your
device does get wet, remove the battery and allow the device to dry
completely before replacing it.
• Do not use or store the device in dusty, dirty areas. Its moving parts and
electronic components can be damaged.
• Do not store the device in hot areas. High temperatures can shorten the life of
electronic devices, damage batteries, and warp or melt certain plastics.
• Do not store the device in cold areas. When the device returns to its normal
temperature, moisture can form inside the device and damage electronic
circuit boards.
• Do not attempt to open the device other than as instructed in this guide.
• Do not drop, knock, or shake the device. Rough handling can break internal
circuit boards and fine mechanics.
• Do not use harsh chemicals, cleaning solvents, or strong detergents to clean
the device.
• Do not paint the device. Paint can clog the moving parts and prevent proper
operation.
• Use only the supplied or an approved replacement antenna. Unauthorized
antennas, modifications, or attachments could damage the device and may
violate regulations governing radio devices.
• Use chargers indoors.
All of the above suggestions apply equally to your device, battery, charger, or any
enhancement. If any device is not working properly, take it to the nearest
authorized service facility for service.
Note: Before sending your device to a service facility, create a backup of
data you want to keep such as contacts and calendar notes.
Additional safety information
86
Additional safety information
■Operating environment
Remember to follow any special regulations in force in any area and always
switch off your device when its use is prohibited or when it may cause
interference or danger. Use the device only in its normal operating positions. This
device meets RF exposure guidelines when used either in the normal use position
against the ear or when positioned at least 7/8 inch (2.2 cm) away from the body.
When a carry case, belt clip, or holder is used for body-worn operation, it should
not contain metal and should position the device at least 7/8 inch (2.2 cm) away
from your body.
In order to transmit data files or messages, this device requires a quality
connection to the network. In some cases, transmission of data files or messages
may be delayed until such a connection is available. Ensure the above separation
distance instructions are followed until the transmission is completed.
■Medical devices
Operation of any radio transmitting equipment, including wireless phones, may
interfere with the functionality of inadequately protected medical phones.
Consult a physician or the manufacturer of the medical device to determine if
they are adequately shielded from external RF energy or if you have any
questions. Switch off your phone in health care facilities when any regulations
posted in these areas instruct you to do so. Hospitals or health care facilities may
be using equipment that could be sensitive to external RF energy.
PACEMAKERS
Pacemaker manufacturers recommend that a minimum separation of 6 inches
(15.3 cm) be maintained between a wireless phone and a pacemaker to avoid
potential interference with the pacemaker. These recommendations are
consistent with the independent research by and recommendations of Wireless
Technology Research. To minimize the potential for interference, persons with
pacemakers should
• Always keep the phone more than 6 inches (15.3 cm) from their pacemaker
when the phone is switched on
• Not carry the phone in a breast pocket
• Hold the phone to the ear opposite the pacemaker to minimize the potential
for interference
Additional safety information
87
If you have any reason to suspect that interference is taking place, switch off
your phone immediately.
HEARING AIDS
Some digital wireless phones may interfere with some hearing aids. If
interference occurs, consult your service provider.
■Vehicles
RF signals may affect improperly installed or inadequately shielded electronic
systems in motor vehicles such as electronic fuel injection systems, electronic
antiskid (antilock) braking systems, electronic speed control systems, air bag
systems. For more information, check with the manufacturer or its representative
of your vehicle or any equipment that has been added.
Only qualified personnel should service the phone, or install the phone in a
vehicle. Faulty installation or service may be dangerous and may invalidate any
warranty that may apply to the phone. Check regularly that all wireless phone
equipment in your vehicle is mounted and operating properly. Do not store or
carry flammable liquids, gases, or explosive materials in the same compartment
as the phone, its parts, or enhancements. For vehicles equipped with an air bag,
remember that an air bag inflates with great force. Do not place objects,
including installed or portable wireless equipment in the area over the air bag or
in the air bag deployment area. If in-vehicle wireless equipment is improperly
installed and the air bag inflates, serious injury could result.
■Potentially explosive environments
Switch off your phone when in any area with a potentially explosive atmosphere
and obey all signs and instructions. Potentially explosive atmospheres include
areas where you would normally be advised to turn off your vehicle engine.
Sparks in such areas could cause an explosion or fire resulting in bodily injury or
even death. Switch off the phone at refueling points such as near gas pumps at
service stations. Observe restrictions on the use of radio equipment in fuel
depots, storage, and distribution areas, chemical plants or where blasting
operations are in progress. Areas with a potentially explosive atmosphere are
often but not always clearly marked. They include below deck on boats, chemical
transfer or storage facilities, vehicles using liquefied petroleum gas (such as
propane or butane), and areas where the air contains chemicals or particles such
as grain, dust or metal powders.
FCC regulations prohibit using your wireless device while in the air. The use of
wireless telephones in an aircraft may be dangerous to the operation of the
aircraft, disrupt the wireless telephone network, and may be illegal.
Additional safety information
88
Failure to observe these instructions may lead to suspension or denial of
telephone services to the offender, legal action, or both.
■Emergency calls
Important: Wireless phones, including this phone, operate using radio
signals, wireless networks, landline networks, and user-programmed
functions. Because of this, connections in all conditions cannot be
guaranteed. You should never rely solely on any wireless phone for
essential communications like medical emergencies.
To make an emergency call, do the following:
1. If the phone is not on, switch it on. Check for adequate signal strength.
2. Press End as many times as needed to clear the display and ready the phone
for calls.
3. Enter the official emergency number for your present location. Emergency
numbers vary by location.
4. Press Call.
If certain features are in use, you may first need to turn those features off before
you can make an emergency call. If the phone is in an offline or flight mode, you
must change the profile to activate the phone function before you can make an
emergency call. Consult this guide or your service provider. When making an
emergency call, give all the necessary information as accurately as possible. Your
wireless phone may be the only means of communication at the scene of an
accident. Do not end the call until given permission to do so.
■Certification Information (SAR)
THE NOKIA 2115 AND NOKIA 2115i DEVICES MEET THE GOVERNMENT'S
REQUIREMENTS FOR EXPOSURE TO RADIO WAVES.
Your mobile device is a radio transmitter and receiver. It is designed and
manufactured not to exceed the limits for exposure to radio frequency (RF) energy
recommended by international guidelines (ICNIRP). These limits establish
permitted levels of RF energy for the general population. The guidelines are based
on standards that were developed by independent scientific organizations
through periodic and thorough evaluation of scientific studies. The standards and
guidelines include a substantial safety margin designed to assure the safety of
the public, regardless of age and health and to account for any variations in
measurements.
The exposure guidelines for mobile devices employ a unit of measurement known
as the Specific Absorption Rate or SAR. The SAR limit stated in the international
Additional safety information
89
guidelines is 2.0 watts/kilogram (W/kg) averaged over ten grams of tissue. Tests
for SAR are conducted using standard operating positions with the device
transmitting at its highest certified power level in all tested frequency bands. The
actual SAR level of an operating device can be well below the maximum value
because the device is designed to use only the power required to reach the
network. That amount changes depending on a number of factors such as how
close you are to a network base station. The highest SAR value when tested
according to international testing procedures for use at the ear for device type
RH-66 is 0.75 W/kg. Your phone’s device type is listed on the label located under
the battery.
SAR values may vary depending on national reporting and testing requirements
and the network band. Use of device accessories and enhancements may result in
different SAR values. Additional SAR information may be provided under product
information at www.nokia.com.
USA and Canada: The SAR limit of USA (FCC) and Canada (IC) is 1.6 W/kg
averaged over one gram of tissue. Device type RH-66 has also been tested
against this SAR limit. The highest SAR value reported under this standard during
product certification for use at the ear is 1.20 W/kg and when properly worn on
the body is 1.03 W/kg. Information about this device can be found on the FCC's
website at http://www.fcc.gov/oet/fccid by searching the equipment
authorization system using FCC ID: QMNRH-66.
■Technical information
Feature Specification
Dimensions Width 42.2 mm
Length 102.4 mm
Depth 21.5 mm
Weight 85 g with BL-6C
Wireless networks CDMA 1900 or 800
Volume 70 cc
Frequency range (Tx) AMPS: 824.04–848.97
PCS: 1851.25–1908.75 MHz
Cellular: 824.70–848.37 MHz
Additional safety information
90
■Patent information
Manufactured or sold under one or more of the following US patents:
Others
Frequency Range (Rx) AMPS: 869.04–893.97
PCS: 1931.25–1988.75 MHz
Cellular: 869.70–893.37 MHz
GPS (2115i) 1575.42 MHz
D405445 5491718 5758278 5887250 6025802 6088342 6377813
D406583 5596571 5790957 5887252 6029065 6148209 6414640
D414189 5642377 5793744 5889770 6047071 6154455 6434186
D405784 5699482 5796757 5929813 6055264 6167038 6459689
D423515 5701392 5802465 5990740 6072787 6205325 6463031
4969192 5708656 5821891 5991627 6076181 6253075 6466173
5440597 5737323 5854978 6005889 6078570 6292474 6480700
5444816 5754976 5859843 6009129 6084471 6332083 6480155
6486835 6496150 6570909 6580771 6587685
4558302 4901307 5056109 5101501 5109390 5265119 RE32580
Feature Specification
Additional safety information
91
■Nokia one-year limited warranty
Nokia Inc. (“Nokia”) warrants that this cellular phone (“Product”) is free from
defects in material and workmanship that result in Product failure during normal
usage, according to the following terms and conditions:
1. The limited warranty for the Product extends for ONE (1) year beginning on
the date of the purchase of the Product. This one year period is extended by
each whole day that the Product is out of your possession for repair under
this warranty.
2. The limited warranty extends only to the original purchaser (“Consumer”) of
the Product and is not assignable or transferable to any subsequent
purchaser/end-user.
3. The limited warranty extends only to Consumers who purchase the Product in
the United States of America.
4. During the limited warranty period, Nokia will repair, or replace, at Nokia’s
sole option, any defective parts, or any parts that will not properly operate for
their intended use with new or refurbished replacement items if such repair
or replacement is needed because of product malfunction or failure during
normal usage. No charge will be made to the Consumer for any such parts.
Nokia will also
pay for the labor charges incurred by Nokia in repairing or replacing the
defective parts. The limited warranty does not cover defects in appearance,
cosmetic, decorative or structural items, including framing, and any non-
operative parts. Nokia’s limit of liability under the limited warranty shall be
the actual cash value of the Product at the time the Consumer returns the
Product for repair, determined by the price paid by the Consumer for the
Product less a reasonable amount for usage. Nokia shall not be liable for any
other losses or damages. These remedies are the Consumer’s exclusive
remedies for breach of warranty.
5. Upon request from Nokia, the Consumer must prove the date of the original
purchase of the Product by a dated bill of sale or dated itemized receipt.
6. The Consumer shall bear the cost of shipping the Product to Nokia in
Melbourne, Florida. Nokia shall bear the cost of shipping the Product back to
the Consumer after the completion of service under this limited warranty.
Additional safety information
92
7. The Consumer shall have no coverage or benefits under this limited warranty
if any of the following conditions are applicable:
a) The Product has been subjected to abnormal use, abnormal conditions,
improper storage, exposure to moisture or dampness, unauthorized
modifications, unauthorized connections, unauthorized repair, misuse,
neglect, abuse, accident, alteration, improper installation, or other acts
which are not the fault of Nokia, including damage caused by shipping.
b) The Product has been damaged from external causes such as collision
with an object, or from fire, flooding, sand, dirt, windstorm, lightning,
earthquake or damage from exposure to weather conditions, an Act of
God, or battery leakage, theft, blown fuse, or improper use of any
electrical source, damage caused by computer or Internet viruses, bugs,
worms, Trojan Horses, cancelbots or damage caused by the connection to
other products not recommended for interconnection by Nokia.
c) Nokia was not advised in writing by the Consumer of the alleged defect or
malfunction of the Product within fourteen (14) days after the expiration
of the applicable limited warranty period.
d) The Product serial number plate or the enhancement data code has been
removed, defaced or altered.
e) The defect or damage was caused by the defective function of the cellular
system or by inadequate signal reception by the external antenna, or
viruses or other software problems introduced into the Product.
8. Nokia does not warrant uninterrupted or error-free operation of the Product.
If a problem develops during the limited warranty period, the Consumer shall
take the following step-by-step procedure:
a) The Consumer shall return the Product to the place of purchase for repair
or replacement processing.
b) If “a” is not convenient because of distance (more than 50 miles) or for
other good cause, the Consumer shall ship the Product prepaid and
insured to:
Nokia Inc., Attn: Repair Department
795 West Nasa Blvd.
Melbourne, FL 32901
Additional safety information
93
c) The Consumer shall include a return address, daytime phone number and/
or fax number, complete description of the problem, proof of purchase
and service agreement (if applicable). Expenses related to removing the
Product from an installation are not covered under this limited warranty.
d) The Consumer will be billed for any parts or labor charges not covered by
this limited warranty. The Consumer will be responsible for any expenses
related to reinstallation of the Product.
e) Nokia will repair the Product under the limited warranty within 30 days
after receipt of the Product. If Nokia cannot perform repairs covered
under this limited warranty within 30 days, or after a reasonable number
of attempts to repair the same defect, Nokia at its option, will provide a
replacement Product or refund the purchase price of the Product less a
reasonable amount for usage. In some states the Consumer may have the
right to a loaner if the repair of the Product takes more than ten (10) days.
Please contact the Customer Service Center at Nokia at the telephone
number listed at the end of this warranty if you need a loaner and the
repair of the Product has taken or is estimated to take more than ten (10)
days.
f) If the Product is returned during the limited warranty period, but the
problem with the Product is not covered under the terms and conditions
of this limited warranty, the Consumer will be notified and given an
estimate of the charges the Consumer must pay to have the Product
repaired, with all shipping charges billed to the Consumer. If the estimate
is refused, the Product will be returned freight collect. If the Product is
returned after the expiration of the limited warranty period, Nokia’s
normal service policies shall apply and the Consumer will be responsible
for all shipping charges.
9. You (the Consumer) understand that the product may consist of refurbished
equipment that contains used components, some of which have been
reprocessed. The used components comply with Product performance and
reliability specifications.
10. ANY IMPLIED WARRANTY OF MERCHANTABILITY, OR FITNESS FOR A
PARTICULAR PURPOSE OR USE, SHALL BE LIMITED TO THE DURATION OF THE
FOREGOING LIMITED WRITTEN WARRANTY. OTHERWISE, THE FOREGOING
LIMITED WARRANTY IS THE CONSUMER’S SOLE AND EXCLUSIVE REMEDY
Additional safety information
94
AND IS IN LIEU OF ALL OTHER WARRANTIES, EXPRESS OR IMPLIED. NOKIA
SHALL NOT BE LIABLE FOR SPECIAL, INCIDENTAL, PUNITIVE OR
CONSEQUENTIAL DAMAGES, INCLUDING BUT NOT LIMITED TO LOSS OF
ANTICIPATED BENEFITS OR PROFITS, LOSS OF SAVINGS OR REVENUE, LOSS OF
DATA, PUNITIVE DAMAGES, LOSS OF USE OF THE PRODUCT OR ANY
ASSOCIATED EQUIPMENT, COST OF CAPITAL, COST OF ANY SUBSTITUTE
EQUIPMENT OR FACILITIES, DOWNTIME, THE CLAIMS OF ANY THIRD PARTIES,
INCLUDING CUSTOMERS, AND INJURY TO PROPERTY, RESULTING FROM THE
PURCHASE OR USE OF THE PRODUCT OR ARISING FROM BREACH OF THE
WARRANTY, BREACH OF CONTRACT, NEGLIGENCE, STRICT TORT, OR ANY
OTHER LEGAL OR EQUITABLE THEORY, EVEN IF NOKIA KNEW OF THE
LIKELIHOOD OF SUCH DAMAGES. NOKIA SHALL NOT BE LIABLE FOR DELAY IN
RENDERING SERVICE UNDER THE LIMITED WARRANTY, OR LOSS OF USE
DURING THE PERIOD THAT THE PRODUCT IS BEING REPAIRED.
11. Some states do not allow limitation of how long an implied warranty lasts, so
the one year warranty limitation may not apply to you (the Consumer). Some
states do not allow the exclusion or limitation of incidental and
consequential damages, so certain of the above limitations or exclusions may
not apply to you (the Consumer). This limited warranty gives the Consumer
specific legal rights and the Consumer may also have other rights which vary
from state to state.
12. Nokia neither assumes nor authorizes any authorized service center or any
other person or entity to assume for it any other obligation or liability beyond
that which is expressly provided for in this limited warranty including the
provider or seller of any extended warranty or service agreement.
13. This is the entire warranty between Nokia and the Consumer, and supersedes
all prior and contemporaneous agreements or understandings, oral or
written, relating to the Product, and no representation, promise or condition
not contained herein shall modify these terms.
14. This limited warranty allocates the risk of failure of the Product between the
Consumer and Nokia. The allocation is recognized by
the Consumer and is reflected in the purchase price.
15. Any action or lawsuit for breach of warranty must be commenced within
eighteen (18) months following purchase of the Product.
Additional safety information
95
16. Questions concerning this limited warranty may be directed to:
Nokia Inc.
Attn: Customer Service
7725 Woodland Center Blvd., Ste. 150
Tampa, FL 33614
Telephone: 1-888-NOKIA-2U (1-888-665-4228)
Facsimile: (813) 249-9619
TTY/TDD Users Only: 1-800-24-NOKIA (1-800-246-6542)
17. The limited warranty period for Nokia supplied attachments and accessories
is specifically defined within their own warranty cards and packaging.
Additional safety information
96
Appendix A
Message from the CTIA
(Cellular
Telecommunications &
Internet Association)
to all users of mobile phones
© 2001 Cellular Telecommunications & Internet Association. All
Rights Reserved.1250 Connecticut Avenue, NW Suite 800,
Washington, DC 20036. Phone: (202) 785-0081
Safety is the most important call you will ever make.
A Guide to Safe and Responsible Wireless Phone Use
Tens of millions of people in the U.S. today take advantage of the unique
combination of convenience, safety and value delivered by the wireless
telephone. Quite simply, the wireless phone gives people the powerful ability to
communicate by voice—almost anywhere, anytime—with the boss, with a client,
with the kids, with emergency personnel or even with the police. Each year,
Americans make billions of calls from their wireless phones, and the numbers are
rapidly growing.
But an important responsibility accompanies those benefits, one that every
wireless phone user must uphold. When driving a car, driving is your first
responsibility. A wireless phone can be an invaluable tool, but good judgment
must be exercised at all times while driving a motor vehicle—whether on the
phone or not.
The basic lessons are ones we all learned as teenagers. Driving requires alertness,
caution and courtesy. It requires a heavy dose of basic common sense—keep your
head up, keep your eyes on the road, check your mirrors frequently and watch out
for other drivers. It requires obeying all traffic signs and signals and staying
within the speed limit. It means using seatbelts and requiring other passengers to
do the same.
Additional safety information
97
But with wireless phone use, driving safely means a little more. This brochure is a
call to wireless phone users everywhere to make safety their first priority when
behind the wheel of a car. Wireless telecommunications is keeping us in touch,
simplifying our lives, protecting us in emergencies and providing opportunities to
help others in need.
When it comes to the use of wireless phones, safety is your most important call.
Wireless Phone “Safety Tips”
Below are safety tips to follow while driving and using a wireless phone which
should be easy to remember.
1. Get to know your wireless phone and its features such as 1-touch dialing and
redial. Carefully read your instruction manual and learn to take advantage of
valuable features most phones offer, including automatic redial and memory.
Also, work to memorize the phone keypad so you can use the 1-touch dialing
function without taking your attention off the road.
2. When available, use a hands-free phone. A number of hands-free wireless
phone accessories are readily available today. Whether you choose an
installed mounted phone for your wireless phone or a speaker phone
accessory, take advantage of these phones if available to you.
3. Position your wireless phone within easy reach. Make sure you place your
wireless phone within easy reach and where you can grab it without
removing your eyes from the road. If you get an incoming call at an
inconvenient time, if possible, let your voice mail answer it for you.
4. Suspend conversations during hazardous driving conditions or situations. Let
the person you are speaking with know you are driving; if necessary, suspend
the call in heavy traffic or hazardous weather conditions. Rain, sleet, snow
and ice can be hazardous, but so is heavy traffic. As a driver, your first
responsibility is to pay attention to the road.
5. Do not take notes or look up phone numbers while driving. If you are reading
an address book or business card, or writing a “to do” list while driving a car,
you are not watching where you are going. It’s common sense. Don’t get
caught in a dangerous situation because you are reading or writing and not
paying attention to the road or nearby vehicles.
6. Dial sensibly and assess the traffic; if possible, place calls when you are not
moving or before pulling into traffic. Try to plan your calls before you begin
your trip or attempt to coincide your calls with times you may be stopped at a
stop sign, red light or otherwise stationary. But if you need to dial while
Additional safety information
98
driving, follow this simple tip—dial only a few numbers, check the road and
your mirrors, then continue.
7. Do not engage in stressful or emotional conversations that may be
distracting. Stressful or emotional conversations and driving do not mix—
they are distracting and even dangerous when you are behind the wheel of a
car. Make people you are talking with aware you are driving and if necessary,
suspend conversations which have the potential to divert your attention from
the road.
8. Use your wireless phone to call for help. Your wireless phone is one of the
greatest tools you can own to protect yourself and your family in dangerous
situations—with your phone at your side, help is only three numbers away.
Dial 9-1-1 or other local emergency number in the case of fire, traffic
accident, road hazard or medical emergency. Remember, it is a free call on
your wireless phone!
9. Use your wireless phone to help others in emergencies. Your wireless phone
provides you a perfect opportunity to be a “Good Samaritan” in your
community. If you see an auto accident, crime in progress or other serious
emergency where lives are in danger, call 9-1-1 or other local emergency
number, as you would want others to do for you.
10. Call roadside assistance or a special wireless nonemergency assistance
number when necessary. Certain situations you encounter while driving may
require attention, but are not urgent enough to merit a call for emergency
services. But you still can use your wireless phone to lend a hand. If you see a
broken-down vehicle posing no serious hazard, a broken traffic signal, a
minor traffic accident where no one appears injured or a vehicle you know to
be stolen, call roadside assistance or other special non-emergency wireless
number.
Careless, distracted individuals and people driving irresponsibly represent a
hazard to everyone on the road. Since 1984, the Cellular Telecommunications
Industry Association and the wireless industry have conducted educational
outreach to inform wireless phone users of their responsibilities as safe drivers
and good citizens. As we approach a new century, more and more of us will take
advantage of the benefits of wireless telephones. And, as we take to the roads,
we all have a responsibility to drive safely.
The wireless industry reminds you to use your phone safely when driving.
For more information, please call 1-888-901-SAFE.
For updates: http://www.wow-com.com/consumer/issues/driving/
articles.cfm?ID=85
Additional safety information
99
Appendix B
Message from the FDA
(U.S. Food and Drug
Administration) to all users
of mobile phones
©July 18, 2001For updates: http://www.fda.gov/cdrh/phones
Consumer Update on Wireless Phones
U.S. Food and Drug Administration
1. Do wireless phones pose a health hazard?
The available scientific evidence does not show that any health problems are
associated with using wireless phones. There is no proof, however, that
wireless phones are absolutely safe. Wireless phones emit low levels of
radiofrequency energy (RF) in the microwave range while being used. They
also emit very low levels of RF when in the stand-by mode. Whereas high
levels of RF can produce health effects (by heating tissue), exposure to low
level RF that does not produce heating effects causes no known adverse
health effects. Many studies of low level RF exposures have not found any
biological effects. Some studies have suggested that some biological effects
may occur, but such findings have not been confirmed by additional research.
In some cases, other researchers have had difficulty in reproducing those
studies, or in determining the reasons for inconsistent results.
2. What is FDA's role concerning the safety of wireless
phones?
Under the law, FDA does not review the safety of radiation-emitting
consumer products such as wireless phones before they can be sold, as it does
with new drugs or medical phones. However, the agency has authority to take
action if wireless phones are shown to emit radiofrequency energy (RF) at a
level that is hazardous to the user. In such a case, FDA could require the
Additional safety information
100
manufacturers of wireless phones to notify users of the health hazard and to
repair, replace or recall the phones so that the hazard no longer exists.
Although the existing scientific data do not justify FDA regulatory actions,
FDA has urged the wireless phone industry to take a number of steps,
including the following:
• Support needed research into possible biological effects of RF of the type
emitted by wireless phones;
• Design wireless phones in a way that minimizes any RF exposure to the
user that is not necessary for phone function; and
• Cooperate in providing users of wireless phones with the best possible
information on possible effects of wireless phone use on human health.
FDA belongs to an interagency working group of the federal agencies that
have responsibility for different aspects of RF safety to ensure coordinated
efforts at the federal level. The following agencies belong to this working
group:
• National Institute for Occupational Safety and Health
• Environmental Protection Agency
• Federal Communications Commission
• Occupational Safety and Health Administration
• National Telecommunications and Information Administration
The National Institutes of Health participates in some interagency working
group activities, as well.
FDA shares regulatory responsibilities for wireless phones with the Federal
Communications Commission (FCC). All phones that are sold in the United
States must comply with FCC safety guidelines that limit RF exposure. FCC
relies on FDA and other health agencies for safety questions about wireless
phones. FCC also regulates the base stations that the wireless phone
networks rely upon. While these base stations operate at higher power than
do the wireless phones themselves, the RF exposures that people get from
these base stations are typically thousands of times lower than those they
can get from wireless phones. Base stations are thus not the subject of the
safety questions discussed in this document.
3. What kinds of phones are the subject of this update?
The term wireless phone refers here to hand-held wireless phones with built-
in antennas, often called cell mobile or PCS phones. These types of wireless
phones can expose the user to measurable radiofrequency energy (RF)
Additional safety information
101
because of the short distance between the phone and the user’s head. These
RF exposures are limited by Federal Communications Commission safety
guidelines that were developed with the advice of FDA and other federal
health and safety agencies. When the phone is located at greater distances
from the user, the exposure to RF is drastically lower because a person's RF
exposure decreases rapidly with increasing distance from the source. The so-
called cordless phones; which have a base unit connected to the telephone
wiring in a house, typically operate at far lower power levels, and thus
produce RF exposures far below the FCC safety limits.
4. What are the results of the research done already?
The research done thus far has produced conflicting results, and many studies
have suffered from flaws in their research methods. Animal experiments
investigating the effects of radiofrequency energy (RF) exposures
characteristic of wireless phones have yielded conflicting results that often
cannot be repeated in other laboratories. A few animal studies, however, have
suggested that low levels of RF could accelerate the development of cancer in
laboratory animals. However, many of the studies that showed increased
tumor development used animals that had been genetically engineered or
treated with cancer-causing chemicals so as to be pre-disposed to develop
cancer in the absence of RF exposure. Other studies exposed the animals to
RF for up to 22 hours per day. These conditions are not similar to the
conditions under which people use wireless phones, so we don’t know with
certainty what the results of such studies mean for human health.
Three large epidemiology studies have been published since December 2000.
Between them, the studies investigated any possible association between the
use of wireless phones and primary brain cancer, glioma, meningioma, or
acoustic neuroma, tumors of the brain or salivary gland, leukemia, or other
cancers. None of the studies demonstrated the existence of any harmful
health effects from wireless phone RF exposures. However, none of the
studies can answer questions about long-term exposures, since the average
period of phone use in these studies was around three years.
5. What research is needed to decide whether RF exposure
from wireless phones poses a health risk?
A combination of laboratory studies and epidemiological studies of people
actually using wireless phones would provide some of the data that are
needed. Lifetime animal exposure studies could be completed in a few years.
Additional safety information
102
However, very large numbers of animals would be needed to provide reliable
proof of a cancer promoting effect if one exists. Epidemiological studies can
provide data that is directly applicable to human populations, but 10 or more
years follow-up may be needed to provide answers about some health
effects, such as cancer. This is because the interval between the time of
exposure to a cancer-causing agent and the time tumors develop — if they do
— may be many, many years. The interpretation of epidemiological studies is
hampered by difficulties in measuring actual RF exposure during day-to-day
use of wireless phones. Many factors affect this measurement, such as the
angle at which the phone is held, or which model of phone is used.
6. What is FDA doing to find out more about the possible
health effects of wireless phone RF?
FDA is working with the U.S. National Toxicology Program and with groups of
investigators around the world to ensure that high priority animal studies are
conducted to address important questions about the effects of exposure to
radiofrequency energy (RF).
FDA has been a leading participant in the World Health Organization
International Electromagnetic Fields (EMF) Project since its inception in
1996. An influential result of this work has been the development of a
detailed agenda of research needs that has driven the establishment of new
research programs around the world. The Project has also helped develop a
series of public information documents on EMF issues.
FDA and the Cellular Telecommunications & Internet Association (CTIA) have
a formal Cooperative Research and Development Agreement (CRADA) to do
research on wireless phone safety. FDA provides the scientific oversight,
obtaining input from experts in government, industry, and academic
organizations. CTIA-funded research is conducted through contracts to
independent investigators. The initial research will include both laboratory
studies and studies of wireless phone users. The CRADA will also include a
broad assessment of additional research needs in the context of the latest
research developments around the world.
7. How can I find out how much radiofrequency energy
exposure I can get by using my wireless phone?
All phones sold in the United States must comply with Federal
Communications Commission (FCC) guidelines that limit radiofrequency
energy (RF) exposures. FCC established these guidelines in consultation with
Additional safety information
103
FDA and the other federal health and safety agencies. The FCC limit for RF
exposure from wireless telephones is set at a Specific Absorption Rate (SAR)
of 1.6 watts per kilogram (1.6 W/kg). The FCC limit is consistent with the
safety standards developed by the Institute of Electrical and Electronic
Engineering (IEEE) and the National Council on Radiation Protection and
Measurement. The exposure limit takes into consideration the body’s ability
to remove heat from the tissues that absorb energy from the wireless phone
and is set well below levels known to have effects.
Manufacturers of wireless phones must report the RF exposure level for each
model of phone to the FCC. The FCC website (http://www.fcc.gov/oet/
rfsafety) gives directions for locating the FCC identification number on your
phone so you can find your phone’s RF exposure level in the online listing.
8. What has FDA done to measure the radiofrequency energy
coming from wireless phones?
The Institute of Electrical and Electronic Engineers (IEEE) is developing a
technical standard for measuring the radiofrequency energy (RF) exposure
from wireless phones and other wireless handsets with the participation and
leadership of FDA scientists and engineers. The standard, Recommended
Practice for Determining the Spatial-Peak Specific Absorption Rate (SAR) in
the Human Body Due to Wireless Communications Devices: Experimental
Techniques, sets forth the first consistent test methodology for measuring
the rate at which RF is deposited in the heads of wireless phone users. The
test method uses a tissue-simulating model of the human head. Standardized
SAR test methodology is expected to greatly improve the consistency of
measurements made at different laboratories on the same phone. SAR is the
measurement of the amount of energy absorbed in tissue, either by the whole
body or a small part of the body. It is measured in watts/kg (or milliwatts/g) of
matter. This measurement is used to determine whether a wireless phone
complies with safety guidelines.
9. What steps can I take to reduce my exposure to
radiofrequency energy from my wireless phone?
If there is a risk from these products—and at this point we do not know that
there is—it is probably very small. But if you are concerned about avoiding
even potential risks, you can take a few simple steps to minimize your
exposure to radiofrequency energy (RF). Since time is a key factor in how
Additional safety information
104
much exposure a person receives, reducing the amount of time spent using a
wireless phone will reduce RF exposure.
If you must conduct extended conversations by wireless phone every day, you
could place more distance between your body and the source of the RF, since
the exposure level drops off dramatically with distance. For example, you
could use a headset and carry the wireless phone away from your body or use
a wireless phone connected to a remote antenna.
Again, the scientific data do not demonstrate that wireless phones are
harmful. But if you are concerned about the RF exposure from these products,
you can use measures like those described above to reduce your RF exposure
from wireless phone use.
10.What about children using wireless phones?
The scientific evidence does not show a danger to users of wireless phones,
including children and teenagers. If you want to take steps to lower exposure
to radiofrequency energy (RF), the measures described above would apply to
children and teenagers using wireless phones. Reducing the time of wireless
phone use and increasing the distance between the user and the RF source
will reduce RF exposure. Some groups sponsored by other national
governments have advised that children be discouraged from using wireless
phones at all. For example, the government in the United Kingdom distributed
leaflets containing such a recommendation in December 2000. They noted
that no evidence exists that using a wireless phone causes brain tumors or
other ill effects. Their recommendation to limit wireless phone use by children
was strictly precautionary; it was not based on scientific evidence that any
health hazard exists.
11.What about wireless phone interference with medical
equipment?
Radiofrequency energy (RF) from wireless phones can interact with some
electronic devices. For this reason, FDA helped develop a detailed test method
to measure electromagnetic interference (EMI) of implanted cardiac
pacemakers and defibrillators from wireless telephones. This test method is
now part of a standard sponsored by the Association for the Advancement of
Medical instrumentation (AAMI). The final draft, a joint effort by FDA,
medical device manufacturers, and many other groups, was completed in late
2000. This standard will allow manufacturers to ensure that cardiac
pacemakers and defibrillators are safe from wireless phone EMI. FDA has
Additional safety information
105
tested hearing aids for interference from handheld wireless phones and
helped develop a voluntary standard sponsored by the Institute of Electrical
and Electronic Engineers (IEEE). This standard specifies test methods and
performance requirements for hearing aids and wireless phones so that no
interference occurs when a person uses a compatible phone and a
accompanied hearing aid at the same time. This standard was approved by
the IEEE in 2000.FDA continues to monitor the use of wireless phones for
possible interactions with other medical devices. Should harmful interference
be found to occur, FDA will conduct testing to assess the interference and
work to resolve the problem.
12.Where can I find additional information?
For additional information, please refer to the following resources:
• FDA web page on wireless phones
http://www.fda.gov/cdrh/phones/index.html
• Federal Communications Commission (FCC) RF Safety Program
http://www.fcc.gov/oet/rfsafety
• International Commission on Non-Ionizing Radiation Protection
http://www.icnirp.de
• World Health Organization (WHO) International EMF Project
http://www.who.int/emf
• National Radiological Protection Board (UK)
http://www.nrpb.org.uk/
July 18, 2001For updates: http://www.fda.gov/cdrh/phones
Additional safety information
106
Index
107
Index
NUMERICS
1-touch dialing 29
A
alarm clock 68
antenna 16
anykey answer 54
automate voicemail 44
automatic redial 54
auto-update 61
B
back cover
removing 16
replacing 17
banner 59
battery
authentication 83
charging 17
charging times 84
removing 16
replacing 17
talk and standby times 84
business cards 34
C
calculator 72
calendar 69
call duration 49
call forward 65
call log 48
Call settings 53
call timers 49
caller groups 34
setting up 34
calling cards 55
calls
answering 21
in-call options 22
making 20
care and maintenance 85
certification information (SAR) 88
charger
connecting 17
times 84
contact information 28
contact name 28
contacts 27
contacts list
add 27
additions 29
delete 28
edit 30
search 27
settings 29
countdown timer 73
currency converter 73
customer care 10
D
dialed numbers 49
dialing codes 45
display language 57
DTMF tones 58
E
edit
contact name 28
emergency calls 88
while using wireless Internet 78
with keypad locked 58
enhancement settings 62
enhancements 80
ESN 10
exchange rate 73
F
FCC information 88
feature codes 65
G
games 76
Index
108
H
headset 18
help 10
help text 15, 59
I
indicators and icons 13
K
Keyguard 22
automatic 58
L
languages 57
lap time 74
location info sharing 53
lock code 62
change 63
loudspeaker 22
M
message folders 40
messages
delete 42
minibrowser messages 47
picture messages 46
text messages 36
voice messages 43
minibrowser 77
minibrowser messages 47
my number 33
N
Network Services 9
O
organizer 68
P
patent information 90
phone lock 62
numbers allowed 63
phone settings 57
picture frame cover 20
picture messages 46
predictive text 25
profiles 52
Q
quick keys 13
R
restore factory settings 67
restrict calls 64
S
safety 7
important safety
information 86
save
addresses and notes 28
numbers, text items, details 28
scrolling 15
security settings 62
set
date 60
time 60
settings 52
call 53
shared memory 9
shortcuts 15
split time 74
standby time 84
start screen 13
stopwatch 74
T
talk and standby times 84
talk time 84
technical information 89
text entry 24
text messages 36
time and date settings 60
timed profiles 53
tone settings 53
turn phone off 18
turn phone on 18
Index
109
V
view
call duration 49
call times 49
data/fax call duration 50
minibrowser duration 51
missed calls 48
picture messages 47
received calls 48
saved messages 41
voice commands 61
voice dialing 32
voice messages 43
voice tags 32
assign a tag 32
options 33
voicemail 43
automate 44
voicemail set up 44
volume
adjusting 22
using the loudspeaker 22
W
warranty 10
welcome note 58
wireless Internet 77
disconnect 78
make an emergency call 78
receive a call while online 78
sign on 77
X
Xpress-on covers 18
Index
110