Microsoft RM-11 Tri-Mode Dual-Band Analog/ PCS Phone (AMPS/CDMA) User Manual 3205 ENv1 sgml

Microsoft Mobile Oy Tri-Mode Dual-Band Analog/ PCS Phone (AMPS/CDMA) 3205 ENv1 sgml

UserManual.wiki >

Microsoft >

RM 11 User Manual HTML Version

Users Manual

Nokia 3205 User Guide

Part No. 9310713, Issue No. 1

Nokia, Nokia 3205, Cut-Out Color Covers, Pop-Port, Nokia Connecting People, and the Nokia Original

Enhancements logos are trademarks or registered trademarks of Nokia Corporation. Other company

and product names mentioned herein may be trademarks or trade names of their respective owners.

Printed in Canada 2/2004

Includes RSA BSAFE cryptographic or security protocol software from

RSA Security.

Java is a trademark of Sun Microsystems, Inc.

The information contained in this user guide was written for the Nokia 3205 product. Nokia operates

a policy of ongoing development. Nokia reserves the right to make changes to any of the products

described in this document without prior notice.

UNDER NO CIRCUMSTANCES SHALL NOKIA BE RESPONSIBLE FOR ANY LOSS OF DATA OR INCOME

OR ANY SPECIAL, INCIDENTAL, AND CONSEQUENTIAL OR INDIRECT DAMAGES HOWSOEVER

CAUSED.

THE CONTENTS OF THIS DOCUMENT ARE PROVIDED “AS IS.” EXCEPT AS REQUIRED BY APPLICABLE

LAW, NO WARRANTIES OF ANY KIND, EITHER EXPRESS OR IMPLIED, INCLUDING, BUT NOT LIMITED

TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE,

ARE MADE IN RELATION TO THE ACCURACY AND RELIABILITY OR CONTENTS OF THIS DOCUMENT.

NOKIA RESERVES THE RIGHT TO REVISE THIS DOCUMENT OR WITHDRAW IT AT ANY TIME WITHOUT

PRIOR NOTICE.

Export Controls

This product contains commodities, technology or software exported from the United States in

accordance with the Export Administration regulations. Diversion contrary to U.S. law is prohibited.

FCC/industry canada notice

Your phone may cause TV or radio interference (for example, when using a telephone in close

proximity to receiving equipment). The FCC or Industry Canada can require you to stop using your

telephone if such interference cannot be eliminated. If you require assistance, contact your local

service facility. This device complies with part 15 of the FCC rules. Operation is subject to the

condition that this device does not cause harmful interference.

Table of Contents

For your safety4

Welcome 6

1. Nokia 3205 phone at a glance 9

2. Set up your phone 14

3. Text entry 21

4. Contacts list 24

5. Messages (Menu 1) 31

6. Call log (Menu 2) 47

7. Profiles (Menu 3) 51

8. Settings (Menu 4) 53

9. Network (Menu 5) 71

10. Radio (Menu 6) 72

11. Camera (Menu 7) 74

12. Gallery (Menu 8) 76

13. Games (Menu 9) 77

14. Voice (Menu 10) 79

15. Minibrowser (Menu 11) 83

16. Organizer (Menu 12) 85

17. Applications (Menu 13) 95

18. Enhancements 97

19. Reference information 99

Care and maintenance 100

Additional safety information 101

Nokia One-Year Limited Warranty 116

For your safety

Read these simple guidelines. Not following them may be dangerous or illegal. Read the

complete user guide for further information.

SWITCH ON SAFELY

Do not switch the phone on when wireless phone use is prohibited or when

it may cause interference or danger.

ROAD SAFETY COMES FIRST

Obey all local laws. Always keep your hands free to operate the vehicle while

driving. Your first consideration while driving should be road safety.

INTERFERENCE

All wireless phones may be susceptible to interference, which could affect

performance.

SWITCH OFF IN HOSPITALS

Follow any restrictions. Switch the phone off near medical equipment.

SWITCH OFF IN AIRCRAFT

Follow any restrictions. Wireless devices can cause interference in aircraft.

SWITCH OFF WHEN REFUELING

Don't use the phone at a refuelling point. Don't use near fuel or chemicals.

SWITCH OFF NEAR BLASTING

Follow any restrictions. Don’t use the phone where blasting is in progress.

USE SENSIBLY

Use only in the normal position as explained in the product documentation.

Don't touch the antenna unnecessarily.

QUALIFIED SERVICE

Only qualified personnel may install or repair this product.

ENHANCEMENTS AND BATTERIES

Use only approved enhancements and batteries. Do not connect

incompatible products.

For your safety

WATER-RESISTANCE

Your phone is not water-resistant. Keep it dry.

BACKUP COPIES

Remember to make back-up copies or keep a written record of all important

information stored in your phone.

CONNECTING TO OTHER DEVICES

When connecting to any other device, read its user guide for detailed safety

instructions. Do not connect incompatible products.

EMERGENCY CALLS

Ensure the phone is switched on and in service. Press the End key as many

times as needed (e.g. to exit a call, to exit a menu, etc.) to clear the display

and return to the main screen. Key in the emergency number, then press the

Talk key. Give your location. Do not end the call until given permission to do

so.

Welcome

Congratulations on your purchase of the Nokia 3205 mobile phone. Your phone provides

many functions which are practical for daily use, such as a radio, hands-free

loudspeaker, alarm clock, calculator, calendar, and more. Your phone can also connect

to a PC, laptop, or other device using a data cable or the built-in IR port. To personalize

your phone, you can set your favorite ring tones, create a go-to-menu, and select an

Cut-Out TM color cover.

■About your device

The wireless phone described in this guide is approved for use on the AMPS 800, CDMA

800 and 1900, and 1XRTT networks. Contact your service provider for more information

about networks.

When using the features in this device, obey all laws and respect privacy and legitimate

rights of others.

Caution: To use any features in this device, other than the alarm clock, the

phone must be switched on. Do not switch the device on when wireless phone

use may cause interference or danger.

■Network services

To use the phone you must have service from a wireless service provider. Many of the

features in this device depend on features in the wireless network to function. These

Network Services may not be available on all networks or you may have to make specific

arrangements with your service provider before you can utilize Network Services. Your

service provider may need to give you additional instructions for their use and explain

what charges will apply. Some networks may have limitations that affect how you can

use Network Services. For instance, some networks may not support all language-

dependent characters and services.

Your service provider may have requested that certain features be disabled or not

activated in your device. If so, they will not appear in your device menu. Contact your

service provider for more information.

Welcome

■Shared memory

The following features in this device may share memory: contacts, text and multimedia

messages, images, graphics, and ringing tones in gallery, calendar and to-do notes,

games and applications. Use of one or more of these features may reduce the memory

available for the remaining features sharing memory. For example, saving many

calendar notes, may use all of the available memory. Your phone may display a message

that the memory is full when you try to use a shared memory feature. In this case, delete

some of the information or entries stored in the shared memory features before

continuing. Some of the features, such as multimedia messages, graphics, ring tones in

gallery, images, and applications may have a certain amount of memory specially

allotted to them in addition to the memory shared with other features.

■Register your phone

Make sure to register your phone at www.warranty.nokiausa.com or call1-888-NOKIA-

2U (1-888-665-4228) so that we can serve your needs better if you should need to call

a customer center or to have your phone repaired.

■Get help

Find your phone label

If you need help, Nokia Customer Care is

available for assistance. Before calling, we

recommend that you write down the

following information and have it available:

• Electronic Serial Number (ESN)

• Your zip code

The ESN is found on the type label, which is located beneath the battery on the back of

the phone.

Contact Nokia

Please have your product with you when contacting either of the numbers below:

Updates

From time to time, Nokia updates this guide to reflect changes. The latest version may

be available at www.nokia.com. An interactive tutorial for this product may be available

at the web site www.nokiahowto.com.

Accessibility solutions

Nokia is committed to making mobile phones easy to use for all individuals. For more

information about phone features, enhancements, alternate format user guides, and

other Nokia products designed with your needs in mind, visit the web site

www.nokiaaccessibility.com or call 1-888-665-4228 for more information.

Nokia Customer Care

Center, USA

Customer Care Center,

Canada

Nokia Inc.

7725 Woodland Center Boulevard

Suite #150

Tampa, Florida 33614Tel:1-888-

NOKIA-2U (1-888-665-4228)Fax:

1-813-249-9619

TTY: 1-800-24-NOKIA (hearing im-

paired only)

Nokia Products Ltd.

601 Westney Road South

Ajax, Ontario L1S 4N7Tel: 1-888-

22NOKIA (1-888-226-6542)Fax:

1-905-427-1070

Nokia 3205 phone at a glance

1. Nokia 3205 phone at a glance

■The start screen

The start screen is “home base” and indicates your phone is in idle mode.

Signal strength—A higher bar indicates a stronger network signal.

Battery level—A higher bar indicates more power in the battery.

Menu—Press the Left selection key to select this option.

Contacts—Press the Right selection key to select this option.

■Quick keys

At the start screen, the Four-way scroll key instantly takes you to frequently-accessed

menus:

•Scroll up key or Scroll down key—Go to the contacts list.

•Scroll right key—View the calendar.

•Scroll left key—Create a message.

■Indicators and icons

Icon Indicates...

You have one or more text or picture messages. See

Read and reply, 34.

You have one or more multimedia messages. See

“Read and reply” on page 27.

You have attached a picture to a multimedia mes-

sage. See Write and send, 38.

Nokia 3205 phone at a glance

You have one or more voice messages. See Voice

messages, 40.

Your phone’s keypad is locked, see Lock the keypad,

22.

Your phone is set to the Silent profile. See Profiles

(Menu 3), 55.

The alarm clock is set to On. See The alarm clock,

92.

The countdown timer is running. See The countdown

timer, 98.

The stopwatch timing is running in the background,

see The stopwatch, 99.

When shown continuously, the IR connection is acti-

vated and your phone is ready to send or receive data

via its IR port; when blinking, your phone is trying to

connect to the other device or a connection has been

lost. See “Send and receive data using IR” on

page 45.

All calls are forwarded to another number. See Call

forwarding, 73.

Integrated handsfree is active, see “The loudspeaker”

on page 15.

The timed profile is selected, see Profiles (Menu 3),

55.

or An enhancement is connected to the phone.

or Voice privacy encryption is active (or is not active)

in the network.

Icon Indicates...

■Get the most out of this guide

The following sections illustrate the various components of your phone. Familiarize

yourself with these sections to help you understand the instructions that follow.

This guide uses certain terms for the steps that you are asked to perform.

• Press means to press and release a key quickly. For example, Press 7 means press the

key on the keypad that is labeled with the number 7 and the letters “p, q, r, s”.

•Press and hold means to press and hold a key for 2–3 seconds, then release the key.

• Selection keys are used to select a menu option. To select an option, press the

selection key below the menu item on the phone’s screen.

• Scroll keys are used to move up, down, left, or right in the menus.

•Talk and End keys: Press the Talk key to place a call or to answer an incoming call.

Press the End key to end a call or press and hold to return to the idle screen.

■Phone menus

Phone features are grouped according to function and are accessed through the main

menus. Each main menu contains submenus and lists from which you can select or view

items and customize your phone features. You can access these menus and submenus

by using the scroll method or by using a shortcut.

Note: Some features may not be available, depending on your network. For

more information, contact your wireless provider.

or Location info sharing is set to Emergency or On. See

Set location info sharing, 58.

You are in a 1XRTT network. See Network services,

You are in a digital network. See Network services,

You are in an analog network. See Network services,

Icon Indicates...

Nokia 3205 phone at a glance

The scroll method

1. At the start screen, select Menu and scroll through the main menus using the up and

down Four-way scroll key.

A scroll bar with a tab moves up or down on the display screen as you scroll through

the menus, providing a visual representation of your current position in the menu

structure.

2. When you arrive at a menu, press Select (the Left selection key) to enter submenus.

•Press Back (the Right selection key) to return to the previous menu.

• Press the End key to return to the start screen from any menu or submenu.

Shortcuts

You can go directly to almost any menu or submenu, as well as activate most features

by using a shortcut.

At the start screen, select Menu, then within 3 seconds, press the key or keys associated

with the menu function you would like to view or activate.

For example, to select the Meeting profile, select Menu 3-3-1 from the start screen

(Menu > 3Profiles > 3Meeting > 1Select). After a brief pause, the Meeting profile is

activated.

In-phone help

Many features have brief descriptions (help text) which can be viewed on the display. To

view these descriptions, scroll to a feature and wait for about 10 seconds. Press More to

view all of the description, or press Back to exit.

In order to view the descriptions, you must first activate help text.

1. At the start screen, select Menu > Settings > Phone settings > Help text activation

and press Select.

2. Scroll to On or Off and press Select.

2. Set up your phone

■The antenna

Your device has an internal antenna located towards the top of the phone. Hold the

phone as you would any other telephone with the antenna area pointed up and over

your shoulder.

Note: As with any other radio

transmitting device, do not touch the

antenna unnecessarily when the device is

switched on. Contact with the antenna affects call

quality and may cause the phone to operate at a

higher power level than otherwise needed.

Avoiding contact with the antenna area when

operating the phone optimizes the antenna

performance and the battery life.

■The battery

Always switch the device off and disconnect the

charger before removing the battery.

Remove the back cover

1. With the back of the phone facing you, push

down on the back cover release button.

2. Slide the back cover toward the bottom of

the phone and remove.

Remove the battery

• After you have removed the back cover, insert your

finger into the finger grip and lift the battery from

its compartment.

Set up your phone

Replace the battery

1. Position the battery so the gold-colored contacts

match up with those on the phone.

The battery label should be facing away from the

phone.

2. Insert the battery, gold-colored contact end first, into the battery slot.

3. Push down on the other end of the battery to snap the battery into place.

Replace the back cover

• Slide the back cover toward the top of the phone

until you hear a click and see the back cover

release button.

Charge the battery

1. Plug the charger transformer in to a standard ac outlet.

2. Insert the charger output plug into the

round jack at the bottom end of the

phone.

After a few seconds, the battery indicator

in the display starts to scroll from bottom

to top. If the battery is completely flat, it

may take a few minutes before the

charging indicator appears on the display

or any calls can be made.

■Turn your phone on or off

1. To turn your phone on or off, press and hold the power key on

top of the phone for at least 3 seconds.

2. Enter the security code if necessary and press OK. See

Security code, 72 for more information.

■Connect the headset

A compatible headset may be purchased with your phone or

separately as an enhancement. (See Enhancements, 105 for

information.)

1. Plug the headset connector into the Pop-Port™

connector at the bottom end of your phone.

2. Position the headset on your ear.

With the headset connected, you can make, answer, and

end calls as usual.

• Use the keypad to enter numbers.

•Press the Talk key to place a call.

•Press the End key to end a call.

■Change the Cut-Out™ covers

Note: Before removing the cover, always switch off the power and disconnect

the charger and any other device. Avoid touching electronic components while

changing the covers. Always store and use the device with the covers attached.

Remove the back cover and the battery

See “Remove the back cover” and “Remove the battery” on page 11 for instructions on

removing the back cover and battery.

Remove the front cover

• Gently pull the bottom of the front cover away

from the rest of the phone and remove.

Set up your phone

Install the keymat and front cover

1. Remove the key mat from the old front cover and

place it into the new front cover as shown.

2. Press the front cover and keymat against the

phone and snap the front cover into place.

Replace the battery and back cover

See “Replace the battery” on page 11 and “Replace the back cover” on page 12 for

instructions on replacing the battery and back cover.

■Make a call

Using the keypad

1. Enter the phone number (including the area code), and press the Talk key.

(To delete a character to the left of the cursor, press Clear.)

2. Press the End key to end the call or to cancel the call attempt.

Using the contacts list

1. At the start screen, scroll to the entry you wish to view.

2. Press the Talk key to make the call, or press Details to view details of the entry.

Using the last dialed number

1. At the start screen, press the Talk key to display the last 30 numbers dialed.

2. Scroll to the number (or name) you wish to redial and press the Talk key.

Conference calling

Conference calling is a Network Service that allows you to take part in a conference call

with two other participants.

1. Make a call to the first participant.

2. With the first participant on the line, select Options > New call and press Select.

3. Enter the phone number of the second participant, or press Search to retrieve a

number from the contacts list.

4. Press Flash.

The first participant is put on hold.

5. When the second participant picks up, press the Talk key to connect the calls.

6. To end the conference call, press Options > End all calls or press the End key.

■Answer calls

Answer or silence an incoming call

1. Press the Talk key to answer the call.

2. Press the End key or Silence to mute the ringing tone; you can then press Answer to

answer the call or press Decline (or do nothing) and the call is eventually diverted to

voicemail.

Answer a call with the keypad locked

To answer a call with the keypad locked, simply press the Talk key. During the call, all

features function as normal. When you end or reject the call, the keypad automatically

re-locks. See Keyguard, 22 for details.

When the phone is locked, calls still may be possible to the official emergency number

programmed into your phone.

Adjust the volume

• To increase the volume of a call, press the right scroll key.

• To decrease the volume of a call, press the left scroll key.

Set up your phone

• When adjusting the volume, a bar chart appears in the display indicating the volume

level.

The loudspeaker

You can use your phone as a loudspeaker during a call. Do not hold the phone to your

ear during the loudspeaker operation.

• To activate the loudspeaker, press Loudsp..

• To deactivate the loudspeaker during a call, press Handset.

The loudspeaker is deactivated automatically when a call (or a call attempt) ends or

when certain enhancements are connected.

Options during a call

Many of the options that you can use during a call, are Network Services. Check with

your wireless service provider for more information.

1. Press Options during a call to display a list of options available during a call.

2. Scroll to an option and press Select to activate the option or enter its submenu.

■Keyguard

With keyguard, you can lock the keypad to prevent keys from being pressed accidentally.

Remember to lock your phone keypad to prevent accidental calls. If the keypad is locked,

it unlocks when you receive a call. After the call, the lock automatically reactivates.

When the keyguard is on, calls still may be possible to the official emergency number

programmed into your phone. Key in the emergency number and press the Talk key.

Lock the keypad

Select Menu with the Left selection key, then press the * key within two seconds.

Unlock the keypad

Select Unlock with the Left selection key, then press the * key within two seconds.

■Flashlight

Your phone has a built-in flashligh that you can activate

when the phone is in the standby mode or when there is a

call in progress. To activate the flashlight:

Press and release the 7/* key. The light stays on until you

press and release the 7/* key again.

You can also use the flashlight to alert you to an

incoming call. For more information, *** 'Customize a profile' on page 51 ***.

Text entry

3. Text entry

You can use two methods for entering text and numbers:

• Standard mode is the only way to enter text into such things as the contacts list,

calendar notes, and to rename caller groups.

• Predictive text input is a quick and easy method for writing messages, creating a

calendar note, or making a to-do list.

■Standard mode

Text (Abc)

• Press a key once to insert the first letter on the key, twice for the second letter, etc. If

you pause briefly, the last letter in the display is accepted and your phone awaits the

next entry.

•Press the 0 key to enter a space thereby accepting a completed word

•Press the 1 key to enter a period (.)

•Press the * key to display special characters. See more about special characters on

the following pages

Numbers (123)

To switch to 123 mode from Abc mode, press and hold the # key at any message entry

screen until the icon in the upper left corner of the display switches from Abc to 123 (or

vice versa).

•Press Clear to backspace the cursor and delete a character

•Press and hold Clear to backspace continuously and delete characters

Punctuation and special characters

While at any text entry screen, press the * key to display special characters (press and

hold the * key if predictive text is on). You can navigate through the list of special

characters by using the Four-way scroll key. Once a character is highlighted, press Insert

to insert the character into your message.

■Predictive text input

Predictive text input allows you to write messages quickly using your keypad and the

phone’s built-in dictionary. It is much faster the standard mode method, because for

each letter, you only press the corresponding key on your keypad once.

Activate/deactivate

At any text entry screen, press and hold Options. Predictive text is turned on and off,

depending on its previous mode.

1. At any text entry screen, select Options > Predictive text and press Select.

2. Scroll to the language of your choice and press Select.

Note: The language setting affects the time and date formats of the clock,

alarm clock, and calendar.

Text entry

The illustration below simulates your display each time a key is pressed. For example, to

write Nokia with predictive text on and with the English dictionary selected, press each

of the following keys once:

the 6 key the 6 key the 5 key the 4 key the 2 key

• Press the 0 key to enter a space and begin writing the next word.

• If a displayed word is not correct, press the * key to see other matches. To return to

the previous word in the list of matches, press Previous.

•If ? appears after a word, press Spell to add the word to the dictionary.

•Press the 1 key to insert a period into your message.

• Press and hold the * key to display special characters. Press the * key again to cycle

through all available characters.

•Press the # key to switch predictive text on or off and to use predictive text in

various modes. As you press the # key, the following icons (not the descriptions)

appear in the upper left of the display screen:

Text entry

Uppercase text; standard mode is On

Lowercase text; standard mode is On

Sentence case text; standard mode is On

Sentence case text; predictive text is On

Lowercase text; predictive text is On

4. Contacts list

The contacts list can hold up to 500 contacts, with multiple numbers and text notes for

each contact. The amount of numbers and text entries that you can save may vary,

depending on length and the total number of entries in the contacts list.

■Add new contacts

Save a name and number

1. At the start screen, enter the phone number you wish to save.

2. Select Options > Save and press Select.

3. Enter the name and press OK.

Save (only) a number

1. At the start screen, enter the phone number you wish to save.

2. Press and hold Options.

Save an entry

1. At the start screen, select Contacts > Add contact and press Select.

2. Enter the name and press OK.

3. Enter the phone number, and press OK > Done.

Save addresses and notes

To save an address or note, you need to add it to an existing entry (contact).

1. Scroll down to the entry to which you would like to add an address or note.

2. With the entry highlighted, press Details.

3. Select Options > Add detail and press Select.

You can add an E-mail address, Web address, Street address, or Note to the entry.

4. Scroll to the address or note of your choice and press Select.

Contacts list

5. Enter the text for the note or address and press OK.

Save multiple numbers and text items

You can save different types of phone numbers and short text items per name to the

contacts list. The first number you save for any entry is automatically set as the default,

or primary number, but the primary number can always be changed.

1. At the start screen, scroll down to the entry to which you wish to add a phone

number or text item.

2. Press Details > Options > Add number or Add detail and press Select.

3. Scroll to General, Mobile, Home, Work, Fax, E-mail address, Web address, Street

address, or Note and press Select.

4. Enter the number or text for the type you have selected and press OK.

5. To change the type, select Change type in the options list.

You can also change which phone number is the default (primary) number for the

contact entry.

1. At the start screen, scroll down to the entry you wish to change, and press Details.

2. Scroll to the number you wish to set as default, select Options > As primary number

and press Select.

Set up voice tags

For more information on setting up voice tags and other voice features, see Voice (Menu

10), 85.

Caller groups

You can add contacts list entries to any of five caller groups, and then assign a unique

ringing tone or graphic to that group. This enables you to identify callers from the group

by their unique ringing tone or graphic.

Setup a group

1. At the start screen, press the Scroll down key to display a list of entries in your

contacts list.

2. Scroll to a name you would like to add to a caller group and press Details.

3. Select Options > Caller groups and press Select.

4. Scroll to the caller group to which you would like to add the name and press Select.

Options

1. At the start screen, select Contacts > Caller groupsand press Select.

Family, VIP, Friends, Business, and Other are the available caller groups.

2. Use the Four-way scroll key to highlight a group and press Selectto display the

following caller group options:

Rename group—Rename the group to your preference.

Group ringing tone—Set the ringing tone for the group.

Group logo—Turn the graphic for the caller group on or off.

Group members—Add or remove members from the caller group.

Set up 1-touch dialing

You can associate any entry in the contacts list with a key from 2–9; then dial those

entries by pressing and holding the assigned key.

Assign a key to 1-touch dialing

1. At the start screen, select Contacts > 1-touch dialing and press Select.

2. Scroll to any empty slot and press Assign.

3. Enter the number (including the area code) and press OK, or press Search to retrieve

a number from the contacts list.

4. Enter a name for the number and press OK.

If 1-touch dialing is off, the phone displays a prompt asking if you would like to turn

1-touch dialing on.

5. Press Yes to activate 1-touch dialing.

Change 1-touch dialing numbers

1. At the start screen, select Contacts > 1-touch dialing and press Select.

2. Scroll to the 1-touch dialing entry you wish to change and select Options > Change

and press Select.

Contacts list

3. Enter the new number, or press Search to retrieve a number from the contacts list,

and press OK.

4. Enter a name for the entry and press OK.

Delete 1-touch dialing numbers

1. At the start screen, select Contacts > 1-touch dialing and press Select.

2. Scroll to the 1-touch dialing location you wish to delete and press Options.

3. Scroll to Delete and press Select.

4. Press OK to delete the key assignment.

■Edit contacts list entries

1. Scroll to the entry you would like to edit and press Details.

2. Scroll to the phone number you wish to edit and press Options.

3. Scroll to one of the following options and press Select:

Add voice tag—Add a voice tag to the contact.

Edit number—Edit an existing phone number of the contact.

Delete number—Delete a phone number from the contact.

Use number—View the details of the contact.

Change type—Change the number type to General, Mobile, Home,Work, or Fax or the

detail type to E-mail address, Web address, Street address, or Note

As primary number—Change the default number of the contact.

Add number—Add a number to the contact.

Add detail—Add an address or note to the contact.

Add image—Add an image from the gallery to the contact.

Caller groups—Add the contact to an existing caller group.

Custom tone—Add a custom ring tone to the contact.

Send bus. card—Send the contact as a business card to another phone.

Send message—Create and send the contact a message.

1-touch dialing—Add the contact to your 1-touch dialing list.

Edit name—Edit the name of the contact.

View name—View the name of the contact.

Delete—Delete the entire contact entry from your contacts list.

4. Edit the option to your preference and press OK.

■Delete contacts list entries

1. At the start screen, select Contacts > Delete and press Select.

2. To delete individual entries, scroll to One by one and press Select.

3. Scroll to the entry you wish to delete, press Delete > OK to confirm.

4. To delete the entire contents of your contacts list, scroll to Delete all.

5. Press Select, then press OK to confirm.

6. Enter the security code and press OK. See Security code, 72 for more information.

■View the contacts list

1. At the start screen, select Contacts. The following menu items appear:

Search—Find a name or select from a list.

Add new—Add a contact to your contacts list.

Edit name—Edit an existing name.

Delete—Delete a name and its associated numbers.

Add number—Add a number to an existing name.

Settings—Change the contacts list view or check the memory status of your phone.

1-touch dialing—View or modify the list of 1-touch dialing numbers.

Voice tags—Attach, listen to, or modify a voice tag to a contact in the

contacts list.

My number—View your own phone number.

Caller groups—View and edit the properties for any of the caller groups, including

Family, VIP, Friends, Business, or Other.

2. Scroll to an item and press Selectto activate the feature or enter its submenu.

Contacts list

Search for a name

1. At the start screen, press the Scroll down key to display the contents of your

contacts list.

2. Press the key which corresponds to the first letter of the name for which you are

performing a search.

3. Scroll up and down to select a contact and press Details to view the details.

Configure settings

You can select how the contacts appear in your contacts list and view the amount of

memory used or available in your phone.

1. At the start screen, select Contacts > Settings and press Select.

2. Scroll to one of the following options and press Select to enter the submenu:

Scrolling view—Select Name list,Name and number, or Name and image view.

Memory status—View the amount of phone memory used as well as the amount of

phone memory available

Note: For more information on used and available memory, see “Shared

memory” on page 5.

■Send and receive contacts (business cards)

You can send and receive an entry in your contacts list using IR or text message, if

supported by your wireless provider.

Send a business card

You can send a business card using IR or as an text message to a compatible phone or

other handheld device.

1. Highlight an entry from the contacts list that you wish to send and select Details >

Options > Send bus. card and press Select.

• To send the business card using IR, make sure the receiving device is set up to

receive data using its IR port and select Via infrared.

• To send the business card as a message, select Via text message.

2. If you selected Via infrared (and the entry has multiple subentries), select Primary

number or All details and press Select.

3. If you selected Via text message (and the entry has multiple subentries), select

Primary number or All details and press Select.

4. Enter the number for your recipient or press Search to retrieve a number from your

contacts list.

5. Press OK and the business card is sent.

Receive a business card using IR

1. At the start screen, select Menu > Settings > Phone settings > Infrared and press

Select to ensure IR is activated.

When you receive the business card, your phone beeps and a message appears in the

display.

2. Press Show > Save to save the business card in phone memory, or press Exit > OK to

discard the business card.

Messages (Menu 1)

5. Messages (Menu 1)

If you have subscribed to a messaging service through your

wireless provider, you can send and receive messages to compatible phones that also

subscribe to a compatible message service. You may also be able to send and receive

picture messages, enhanced messages, multimedia messages and e-mail messages.

Note: When sending messages, your device may display the words “Message

sent.” This is an indication that the message has been sent by your device to the

message center number programmed into your device. This is not an indication

that the message has been received at the intended destination. For more

details, about messaging services, check with your service provider.

■Text messages

Write and send

1. At the start screen, select Menu > Messages > Text messages > Create message >

Text > Edit message and press Select.

To go quickly to the Create message display, press the Scroll left key from the start

screen.

2. After a brief pause, the message entry screen appears in the display.

3. Compose a message using the keypad and press Options.

4. Scroll to Send and press Select.

5. Scroll toAdd number and press Select.

6. Enter the recipient’s phone number, or press Search to retrieve a number from your

contacts list, and press OK.

Templates

Templates are short, pre-written messages which can be recalled and inserted into new

text messages when you’re short on time.

1. At the start screen, select Menu > Messages > Text messages > Create message >

Text > Edit message and press Select.

2. Press Options, scroll to Use template and press Select.

3. Scroll to one of the available templates and press Select.

4. Enter the text into your new message and press Options > Send > Add number and

press Select.

5. Enter the recipient’s phone number, or press Search to retrieve a number from your

contacts list, and press OK.

Read and reply

When you receive a message, your phone beeps, and 1 message received and the

unopened letter icon ( ) appears in the display.

1. Press Show to read the message, or Exit to move it to your inbox.

When you have unopened messages in your inbox, is shown in the upper left

corner of the start screen as a reminder.

Use the scroll keys (the Scroll up key or the Scroll down key) to view the whole

message if necessary.

2. Select Options > Reply and press Select.

3. Select a Start reply with option, then compose your reply using the keypad.

4. Select Options > Send and press Select.

Options

When you create a text message, depending on the mode of text input you are using

and the features supported by your wireless service provider, some or all of the

following options are available:

Send—Send the message to one recipient.

List recipients—Send the message to more than one recipient.

Settings—Set the priority of the message.

Save message—Select Archive to save the message in your archive; select Templates to

save the message as one of your predefined templates.

Clear screen—Erase the text clipboard.

Exit editor—Save the message to your archive automatically and leave the message

editor.

Insert contact—Insert a name from your contacts list into your message.

Messages (Menu 1)

Insert number—Insert a phone number or find a phone number in the contacts list.

Use template—Insert a predefined template into your message.

Insert picture—Insert a picture from the Gallery folder.

Edit word/Insert word—Enter or edit the text of a new word that might not appear in the

predictive text dictionary.

Insert symbol—Insert a special character into your message.

Predictive text—Choose a predictive text language and turn predictive text on or off.

Matches—View matches found in the dictionary for the word you want to use.

When you read or reply to a text message, the following options are available:

Delete—Discard the message.

Reply—Reply to the message. Create the message and press Options, then Send. The

sender’s phone number or e-mail is used as the default

Use number—Choose Save, Add to contact, Send message, or Call.

Save—Save the message to a folder.

Forward—Forward the message to another phone number.

Rename—Edit the title of the message.

Change sending options

1. At the start screen, select Menu > Messages > Text messages > Message settings >

Sending options and press Select.

2. Scroll to the setting you wish to change and press Select:

Priority—Set the priority of the note as Urgent or Normal and press Select.

Delivery note—A note is sent to you confirming delivery of the message. Scroll to On

or Off and press Select.

Send callback number—A callback number is sent to the recipient. Scroll to Offor

your phone number and press Select.

Settings

When the message memory is full, your phone cannot send or receive any new

messages. However, you can set your phone to automatically replace old messages in

the Inbox and Outbox folders when new ones arrive.

1. At the start screen, select Menu > Messages > Text messages > Message settings >

Other settings and press Select.

2. Scroll to the setting you wish to change and press Select.

Message font size—Scroll to Small font or Large font and press Select.

Message overwriting—Scroll to Sent items only, Inbox only, Sent items & inbox, or

Off and press Select.

Save to sent items as sending—Scroll to Always save, Always prompt, or Off and press

Select.

Enhanced messages

Enhanced messaging is a Network Service. If your wireless service provider supports this

feature, enhanced messaging functions in the same manner as text messaging, but it

offers additional options for the style and content of the message.

While creating an enhanced message, the following options are available:

Add-ins—Select Sound, Animation, or Picture to add to the message.

Styles—Select Font type, Font size, or Text alignment of the message.

Note: If you try to send an enhanced message to a phone that does not support

enhanced messaging, the enhanced messaging content will be stripped from

the message, leaving only the text you have entered.

While viewing a received enhanced message, the following options are available:

Sound—Select Play sound or Save sound.

Picture—Select Save picture.

Animation—Select Save animation.

Linked messages

You can send messages that exceed 160 characters, which will be sent as a series of two

or more messages, also known as a linked message. In the navigation bar, you can see

the message length indicator counting backwards from 160. For example, 10 (2) means

that you can still add 10 characters for the text to be sent as two messages.

Using special (Unicode) characters take up more space. If there are special characters in

your message, the indicator may not show the message length correctly. Before the

message is sent, the phone will tell you if the message exceeds the maximum length

Messages (Menu 1)

allowed for one message. Cancel sending by pressing Cancel or save the message in the

inbox.

■Multimedia messages

A multimedia message (MMS) is a Network Service. If your wireless service provider

supports this feature, then the message can contain text, sound, and a picture. Your

phone supports multimedia messages that are up to 45 kB. If the maximum size is

exceeded, the phone may not be able to receive the message. Once you save the

multimedia message, you can use the image as a screen saver or the sound as a ringing

tone. In some networks, you may receive a message that includes an internet address

where you can view the multimedia message.

Note: Only devices that offer compatible multimedia message or e-mail

features can receive and display multimedia messages. Multimedia message

objects may contain viruses or otherwise be harmful to your device or PC. Do

not open any attachment if you are not sure of the trustworthiness of the

sender.

Note: When your phone is dedicated to a call in progress, an application (such

as a game), or an active web browser connection, the phone cannot receive

multimedia messages.

The default setting of the multimedia message service is generally on.

Multimedia messaging supports JPEG, GIF, PNG, OTA-BMP and WBMP picture formats,

and SP-MIDI and monophonic ringing tones.

The appearance of a multimedia message may vary depending on the receiving device.

being copied, modified, transferred, or forwarded.

Write and send

1. At the start screen, select Menu > Messages > Multimedia msgs. > Create message

and press Select.

2. Enter the text of your message and press Options > Insert image or Insert sound clip

and press Select.

3. Choose the image or sound and press Insert.

4. Press Options > Send to number, Send to e-mail or Send to many, and

press Select.

5. Enter the number of the recipient or the e-mail address and press Select.

Read and reply

When a multimedia message is being received, appears. Once the message has

been fully downloaded, and Multimedia message received appear.

1. To view the message, press Show.

2. To view the message later, press Exit > No when asked to discard.

3. While viewing the message, select Options > Reply and press Select.

4. Select a Start reply with option, and compose your reply using the keypad.

5. Press Options > Send and press Select.

Note: If blinks and Multimedia memory full, view waiting msg. appears,

delete some of your old multimedia messages. See Delete messages, 48 for more

information.

Options

When you create an MMS, depending on the mode of text input you are using, some or

all of the following options are available:

Send to number—Send the message to a phone number.

Send to e-mail—Send the message to an e-mail address.

Send to many—Send the message to several recipients.

Preview—View the MMS before sending it.

Insert image—Insert an image from the Gallery menu.

Insert sound clip—Insert a sound clip from the Gallery menu.

Clear screen—Erase the text clipboard.

Save message—Select Archive to save the message in your archive; select Templates to

save the message as one of your predefined templates.

More options—Choose Insert contact, Insert number, Message details, or Edit subject

Exit editor—Save the message to your archive automatically and leave the message

editor.

Insert word/Edit word—Enter or edit the text of a new word that might not appear in the

predictive text dictionary.

Messages (Menu 1)

Insert symbol—Insert a special character into your message.

Predictive text—Choose a predictive text language and turn predictive text on or off.

Matches—View matches found in the dictionary for the word you are trying to use.

When you read or reply to an MMS, the following options are available:

Delete message—Delete a saved message.

Reply—Reply to the message. Press Options > Send. The sender’s phone number or e-

mail is used as the default.

Forward to no.—Forward the message to another number.

Forward to e-mail—Forward the message to an e-mail address.

Edit—Edit the message. You can only edit messages that you have written.

Message details—View the message subject, size, and class.

Play—Listen to a sound clip in the message, if one is included.

Save tone—Save a ringing tone, if included, to the Gallery menu.

Zoom—Enlarge the picture.

Save image—Save any picture that is attached to your picture gallery.

Settings

You will need to define the MMS settings. Other multimedia settings include saving

your messages to the Sent items folder and receiving delivery reports.

1. At the start screen, select Menu > Messages > Multimedia msgs. > Multimedia

msgs. and press Select.

2. Scroll to an option and press Select to activate the option or enter its submenu:

Save sent messages—Saves sent multimedia to the Sent itemsfolder.

Delivery reports—Select Yes or No to be notified by the network if the message was

sent successfully.

Allow multimedia reception—Select Yes, No, or In home network for your multimedia

service. In home network means that you cannot receive multimedia messages

outside the home network.

Incoming multi- media messages—Select Retrieve to receive multimedia messages

or Reject to reject multimedia messages.

Allow advertisements—Allows you to enable or disable reception of automatic

multimedia advertisements.

■Voice messages

If you subscribe to voice mail, your wireless provider will furnish you with a voice

mailbox number. You need to save this number to your phone to use voice mail. When

you receive a voice message, your phone lets you know by beeping, displaying a

message, or both. If you receive more than one message, your phone shows the number

of messages received.

Save voice mailbox number

Your wireless provider may have already saved your voice mailbox number to your

phone. If so, the number will appear in the display in step 2. Press OK to leave the

number unchanged.

1. At the start screen, select Menu > Messages > Voice messages > Voice mailbox

number and press Select.

After a brief pause, the Voice mailbox number screen appears in the display.

2. If the box is empty, enter the voice mailbox area code and number.

3. Press OK.

Call and setup your voice mail

1. Once you have saved the voice mailbox number, press and hold the 1 key.

2. When you connect to voice mail and the prerecorded greeting begins, follow the

service’s automated instructions to setup your voice mail.

Listen to your voice messages

Once you have setup voice mail, you can dial the number in one of four ways:

• Dial the number using the keypad.

• Press and hold the 1 key.

•Press Listen if there is a notification message in the display.

Messages (Menu 1)

• At the start screen, select Menu > Messages > Voice messages > Listen to voice

messages and press Select.

Once you connect and the prerecorded greeting begins, follow the automated

instructions to listen to your voice messages.

Automate voice mail

You can insert special characters called “dialing codes” into phone numbers such as

voice mail, and save the number to a 1-touch dialing location. Dialing codes instruct the

receiving system to pause, wait, bypass, or accept the numbers that follow them in the

dialing string.

Note: Voice mail services vary by service provider. The following instructions

are examples of common operations. Please check with your service provider for

specific instructions for using your voice mail service.

Write down voice mailbox number and process

1. Write down your voice mailbox number.

2. Call and check your voice mail as you normally would.

3. Write down your interaction with the recorded prompts step-by-step. Keep in mind

that each voice mail service may vary. However, it should look something like this:

Dial 2145551212, pause 5 seconds, press 1, pause 2 seconds, press 1234, press

pound key.

Be precise; you will need this information in Setup voice mail with dialing codes, 43.

Insert dialing codes

Press the * key repeatedly to cycle through dialing codes. Once the desired code appears

in the display, pause briefly and the code is inserted into the dialing string.

The following dialing codes are available:

Dialing

code

Indicates...

* Bypasses a set of instructions.

Setup voice mail with dialing codes

1. At the start screen, press Contacts > 1-touch dialing, and press Select.

2. Scroll to an empty 1-touch dialing slot and press Assign.

3. Enter your voice mailbox number, including the area code.

4. Refer to dialing codes and enter any codes as necessary using the information that

you wrote down from *** 'Setup voice mail with dialing codes' on page 43 ***.

For example, if you pause for 5 seconds after connecting to voice mail, enter p twice

after the voice mailbox number, for example, 2145551212pp.

5. Enter any remaining pauses or other information that allows you to listen to your

messages, and press OK.

6. Enter a name (such as Voice Mail) and press OK.

To dial and listen to your voice mail, just press and hold the assigned 1-touch dialing key

at the start screen.

■Picture messages

Picture messaging is a Network Service. If your wireless service provider supports this

feature, your phone comes with five preloaded pictures. You can, however, over-write

any of the five pictures that come with your phone. Pictures can be attached to a

message and sent using text messaging or e-mail to compatible phones or PCs. Picture

messages behave the same as text messages, but pictures take up more space than text.

Pictures are stored in the Templates folder at Menu > Messages >Text messages >

Templates.

being copied, modified, transferred, or forwarded.

p Pauses for 2.5 seconds before sending any numbers that

follow.

w Waits for you to press the Talk key before sending the

numbers or codes that follow.

Dialing

code

Indicates...

Messages (Menu 1)

Download pictures

Your phone can download pictures, or receive them from compatible phones using text

messaging to use in messages. You can also create pictures and send them to your

phone or other compatible phones.

Write and send

One picture message is generally equivalent in size to three text messages. When you

insert a picture into a message, you’ll have enough remaining space for about 121

characters in the message. If you try and insert a picture into a message that is almost

full of text, a beep sounds and you are prompted to delete some text before proceeding.

1. At the start screen, select Menu > Messages > Text messages > Create message >

Text and press Select.

2. Write a message using the keypad (or enter nothing if you choose to just send a

picture), and press Options.

3. Scroll to Use template and press Select.

4. Scroll down through the text templates to a picture and press View.

5. Press Insert to insert the picture into your message, otherwise:

•Press Back, scroll to another picture, and press View again.

•Press Insert to insert the picture into your message.

6. To send the picture message, press Options, scroll to Send, and press Select.

7. Scroll to Add number and press Select.

8. Enter the phone number for your recipient, or press Search to retrieve a number

from the contacts list, and press OK.

Preview/Change/Delete

1. After a picture has been inserted into your message, press Options at the message

edit screen.

2. Scroll to one of the following options and press Select.

Preview—Previews the inserted message before sending. Press Back to return to the

list of options.

Change picture—Takes you back to the picture list. Scroll to highlight a new picture,

press View, then Insert to replace the previous picture in your message.

Delete picture—Press OK to delete the picture from your message, or press Back to

return to the list of options.

For more options while creating a picture message, see “Options” on page 24.

View a picture message

When you receive a picture message, your phone beeps and 1 message received appears

in the display as well the message icon ( ).

1. Press Show to view the picture message, or press Exit to move it to your inbox.

2. If you have more than one picture message, scroll to the message of your choice and

press Select to view the message.

When you have unopened picture messages in your inbox, is shown in the

upper left corner of the start screen as a reminder.

3. Scroll to view the whole picture if necessary.

4. Once you are finished, press Back to move the picture message to the Inbox, or press

Options for other choices, such as Reply or Forward.

If you would like to save the picture to your Templates folder for later use, press Options

> Save picture and press Select. You can enter a title for the picture and press OK.

Note: If your templates folder is full of pictures, scroll to the picture you would

like to replace and press Select.

For more options while viewing a picture message, see MMS Options, 38.

■Minibrowser messages

Minibrowser messaging is a Network Service. See Network services, 7 for more

information.

If your wireless service provider supports this feature, you can check for e-mail

messages using the minibrowser. At the start screen, select Menu > Messages >

Minibrowser messages > Connect.

See Minibrowser (Menu 11), 89 for more information on using the Minibrowser in your

phone to access web pages.

Messages (Menu 1)

■E-mail messages

E-mail messaging is a Network Service. See Network services, 7 for

more information.

If your wireless service provider supports this feature, you can send text or multimedia

messages to a person’s internet or corporate e-mail account or to phones in other

networks.

Write and send

Use “Write and send” on page 23 to create a text message or Write and send, 38 to

create a multimedia message. Select List recipients > Add e-mail and enter the e-mail

address, or press Search to recall an e-mail address from the contacts list.

Read and reply

Your service provider may be able to route e-mail messages to your phone, which

appear as text messages when you receive them.

See Read and reply, 34 for the text message instructions on how to read and reply to e-

mail messages.

■Message folders

Save messages to folders

You can save drafts of messages or received messages to an existing folder or to a folder

that you have created.

1. Open the received message or create a new message and press Options.

2. Scroll to Save or Save message > Sent items, Templates, Archive, or a folder you have

created on your own and press Select.

Save the message to another folder

1. While viewing a message, press Options > Save or Save message and press Select.

2. Scroll to the destination folder and press Select.

View saved messages

1. At the start screen, select Menu > Messages > Text messages.

2. After a brief pause, scroll to the folder containing the message you wish to view and

press Select.

3. Once the folder opens, scroll to the message you wish to view and press Select.

Inbox folder

Messages are automatically stored in the inbox after they have been read or if you press

Back when 1 message received appears on the start screen.

Outbox folder

Messages that you have created but have not sent are automatically stored in

the outbox.

Archive folder

Store messages that have been read in the Archive folder.

Templates folder

Pictures and prewritten templates are stored in the Templates folder. Preloaded

templates can be edited and customized.

My folders

Keep your messages organized by creating custom folders and saving some of your

messages there.

Add a folder

1. At the start screen, select Menu > Messages > Text messages > My folders > Options

> Add folder and press Select.

2. Enter a name for the new folder and press OK.

Rename a folder

1. At the start screen, select Menu > Messages > Text messages > My folders and press

Select.

Messages (Menu 1)

2. Any folders that you have created appear in the display. Scroll to the folder you wish

to rename and press Options.

3. Scroll to Rename folder and press Select.

4. Enter the new name for the folder and press OK to confirm or Back to exit.

Delete a folder

Only folders created in My folders can be deleted. The Inbox, Outbox, Archive, and

Templates folders are protected. When you delete a folder, all messages in the folder are

also deleted.

1. At the start screen, select Menu > Messages > Text messages > My folders and press

Select.

2. Scroll to the folder you wish to remove and select Options > Delete folder and press

Select.

3. Press OK to delete or Back to exit.

■Delete messages

If your message memory is full and you have more messages waiting at the network,

blinks in on start screen. You can do the following:

• Read some of the unread messages and then delete them.

• Delete messages from some of your folders.

A single message

To delete a single message, you need to open it first.

1. At the start screen, select Menu > Messages > Text messages or Multimedia msgs.

and press Select.

2. Scroll to the folder containing the message you wish to delete and press Select.

3. Scroll to the message you wish to delete and press Select.

4. Press Options > Delete and press Select.

5. Press OK to delete the message or Back to exit.

All messages in a folder

1. At the start screen, select Menu > Messages > Text messages or Multimedia msgs. >

Delete messages and press Select.

2. Scroll to the folder containing the messages you wish to delete and press Select.

If you select All read, it deletes any messages which have been read in all of the

folders.

3. Press OK to empty the folder.

Call log (Menu 2)

6. Call log (Menu 2)

Call log stores information about the last 30 missed, 30 received,

or 30 dialed calls. It also adds the total duration of all calls. When the number of calls

exceed the maximum, the most recent call replaces the oldest.

Whether viewing missed, received, or dialed calls, the menu options are the same:

Call time—Display the date and time of the call.

Send message—Send a message to the number.

View number—Display the number.

Use number—Edit the number and associate a name with the number.

Save—Enter a name for the number and save it to your contacts list.

Add to contact—Add the number to an existing entry in your contacts list, if the number

is not associated with a name.

Delete—Clear the number from memory.

Call—Call the number.

■View missed calls

Note: The missed calls feature does not function when your phone is switched

off.

Missed calls are calls that were never answered.

1. If 1 missed call appears in the display, press List.

2. When the phone number appears in the display, press Options.

3. Scroll to an option and press Select to activate the option.

1. At the start screen, select Menu > Call log > Missed calls and press Select.

2. Scroll to a name or number and press Options.

3. Scroll to an option and press Select to view or activate the option.

■View received calls

Received calls are calls that have been answered.

1. At the start screen, select Menu > Call log > Received calls and press Select.

2. Scroll to a name or number and press Options.

3. Scroll to an option and press Select to view or activate the option.

■Dialed numbers

Dialed calls are previous numbers you have dialed from your phone:

1. At the start screen, press the Talk key.

At the start screen, select Menu > Call log > Dialed numbers and press Select.

2. Scroll to a name or number and press Options.

3. Scroll to an option and press Select to view or activate the option.

Call times

You can make or receive up to five calls to or from the same number and view the time

each call occurred. Your clock must be set for this feature to work accurately.

1. While viewing a missed or received call, press Options > Call time and press Select.

2. Press the Scroll down key to view the most recent call times from this number; press

Back to return to the options list.

■Delete call logs

You can delete any missed, dialed, or received calls from phone memory.

1. At the start screen, select Menu > Call log > Delete recent call lists and press Select.

2. Scroll to the call type you would like to clear (All, Missed, Received or Dialed) and

press Select.

Call log (Menu 2)

■Duration of calls

Note: The actual time invoiced for calls and services by your service provider

may vary, depending on network features, rounding off for billing, taxes, and so

forth.

Last call

At the start screen, select Menu > Call log > Call timers > Duration of last call > Details

for more information.

Dialed calls

At the start screen, select Menu > Call log > Call timers > Duration of dialed calls >

Details for more information.

Received calls

At the start screen, select Menu > Call log > Call timers > Duration of received calls >

Details for more information.

All calls

At the start screen, select Menu > Call log > Call timers > Duration of all calls.

Life timer

At the start screen, select Menu > Call log > Call timers > Life timer.

Note: Some timers, including the life timer, may be reset during service or

software upgrades.

Clear timers

At the start screen, select Menu > Call log > Call timers > Clear timers > OK enter your

lock code, and press OK.

■Duration of data/fax calls

Data/fax calls are a Network Service. See Network services, 7 for more information. If

your wireless service provider supports this feature, you can view the size or duration of

sent or received data and fax calls.

Note: The actual time invoiced for calls and services by your service provider

may vary, depending on network features, rounding off for billing, taxes, and so

forth.

1. At the start screen, select Menu > Call log > Data/fax calls and press Select.

2. Scroll to one of the following options:

Last sent data/fax—View the size (kB) of the last send data/fax call.

Last received data/fax—View the size (kB) of the last received data/fax call.

All sent data/fax—View the size (kB) of all sent data and fax calls.

All received data/fax—View the size (kB) of all received data and fax calls.

Duration of last data/fax call—View the duration time of the last data or

fax call.

Duration of all data/fax calls—View the duration time of all calls.

Clear all data/fax logs—Press OK > Yes to clear all data/fax logs.

■Duration of minibrowser

Minibrowser is a Network Service. See Network services, 7 for more information. If your

wireless service provider supports this feature, you can view the size or duration of sent

or received data from the Minibrowser.

Note: The actual time invoiced for calls and services by your service provider

may vary, depending on network features, rounding off for billing, taxes, and so

forth.

1. At the start screen, select Menu > Call log > Minibrowser and press Select.

2. Scroll to one of the following options:

Last sent browser data—View the size (kB) of the last send browser data.

Last received browser data—View the size (kB) of the last received data.

All sent browser data—View the size (kB) of all sent browser data.

All received browser data—View the size (kB) of all received browser data.

Last browser session—View the duration time of the last browser session.

All browser sessions—View the duration time of all browser sessions.

Clear all browser logs—Press OK > Yes to clear all browser logs.

Profiles (Menu 3)

7. Profiles (Menu 3)

Profiles define how your phone reacts when you receive a call or

message, how your keypad sounds when you press a key, and more. Ringing options,

keypad tones, and other settings for each of the available profiles can be left at their

default setting, or customized to suit your needs. The following profiles are available:

Normal, Silent, Meeting, Outdoor, and Pager.

Profiles are also available for enhancements such as a headset and car kit. See

“Enhancement settings” on page 48 for more information about enhancement profiles.

■Activate

1. At the start screen, select Menu > Profiles and press Select.

2. Scroll to the profile of your choice and press Select.

3. Scroll to Select and press Select.

■Customize a profile

You can customize any of the profiles a variety of ways.

1. At the start screen, select Menu > Profiles and press Select.

2. Scroll to the profile you wish to customize and press Select.

3. Scroll to Customize and press Select.

4. Scroll to the option you want to customize (Incoming call alert, Ringing tone,

Ringing volume, Vibrating alert, Light alert, Message alert tone, Keypad tones,

Warning tones, or Alert for ) and press Select.

Note: You cannot rename the Normal profile.

■Set a timed profile

Timed profiles can be used to prevent missed calls. For example, suppose you attend an

event that requires your phone be set to Silent before the event starts, but you forget to

return it to Normal until long after the event. A timed profile can prevent missed calls by

returning your phone to the default profile at a time you specify.

Note: Timed profiles can be set up to 24 hours in advance.

1.At the start screen, select Menu > Profiles and press Select.

2. Scroll to the profile you wish to activate and set for timed expiration and press

Select.

3. Scroll to Timed and press Select.

4. Enter the time for the profile to expire and press OK.

Settings (Menu 4)

8. Settings (Menu 4)

Use this menu to set or change the Right selection key (the Go to

Menu) settings, time and date settings, call settings, phone settings, display settings,

tone settings, enhancement settings, security settings, and to restore the factory

settings.

■Right selection key settings

You can change the function of the Right selection key on your phone so that your most

frequently used functions can be quickly accessed from the start screen.

Choose functions

1. At the start screen, select Menu > Settings > Right selection key settings > Select

options and press Select.

2. Use the Scroll up key and the Scroll down key to highlight the desired functions from

the list of available functions.

3. Press Mark. Use Unmark to remove a function.

Contacts cannot be unmarked from the list.

4. Press Done when you have added all desired functions.

5. Select Yes to save the changes.

At the start screen, Go to is now the option for the Right selection key on your

phone.

6. Press Go to to display a list of the functions that you selected in step 3.

Organize functions

1. At the start screen, select Menu > Settings > Right selection key settings and press

Select > Organize and press Select.

2. Use the Scroll up key or the Scroll down key to highlight the function you wish to

rearrange and select Move.

3. Scroll to Move up, Move down, Move to top, or Move to bottom from the list of

choices and press Select.

4. Press Done > Yes to save the changes.

■Call settings

Set location info sharing

Location info sharing is a Network Service. See Network services, 7 for more

information.

If your wireless service provider supports this feature, then location info sharing allows

the phone to share position information over the network. For calls to emergency

numbers, this position information may be used by the emergency operator to

determine the position of the phone. The functionality of this feature is dependent on

the network, satellite systems, and the agency receiving the information. It may not

function in all areas or at all times.

At the start screen, select Menu > Settings > Call settings > Location info sharing >

Emergency or On > OK > OK.

Emergency—This is the phone default profile. The phone’s location information is shared

only during an emergency call to the official emergency number programmed into your

phone. The phone screen displays in the upper left hand corner of the start screen.

On—The phone location information is shared with the network whenever the phone is

powered on and activated. The screen displays in the upper left hand corner of the

start screen.

Note: Location information will always be shared with the network during

emergency calls to the official emergency number programmed into the phone,

regardless of which setting is selected. After placing an emergency call the

phone remains in emergency mode for five minutes. During this time, the

location information will be shared with the network. For more information,

”Emergency calls” on page 112 .

Anykey answer

Anykey answer allows you to answer an incoming call by briefly pressing any key except

the power key, Left selection key, Right selection key, or End key.

Settings (Menu 4)

At the start screen, select Menu > Settings > Call settings > Anykey answer and press

Select > On or Off and press Select.

Automatic redial

Occasionally, your network may experience heavy traffic, resulting in a “fast” busy

signal when you dial. With automatic redial activated, your phone redials the number

up to 10 times, and notifies you once the network is available.

At the start screen, select Menu > Settings > Call settings > Automatic redial > On or

Off and press Select.

Activate 1-touch dialing

You can activate or deactivate 1-touch dialing. For more information, see Set up 1-

touch dialing, 28.

Automatic update of service

Your phone is capable of receiving updates to wireless services sent to your phone by

your service provider.

At the start screen, select Menu > Settings > Call settings > Automatic update of service

> On or Off and press Select.

Calling cards

If you use a calling card for long distance calls, you can save the calling card numbers in

your phone. Your phone can store up to four calling cards.

Save information

1. At the start screen, select Menu > Settings > Call settings > Calling card and press

Select.

2. Enter your lock code and press OK.

3. Scroll to one of the four memory locations and press Options > Edit > OK > Dialing

sequence and press Select.

4. Scroll to one of the following sequence types and press Select:

Access no.+ phone no.+ card no.—Dial 1-800 access number, phone number, then

card number (+ PIN if required)

Access no.+ card no.+ phone no.—Dial 1-800 access number, card number (+ PIN if

required), then phone number

Prefix+ phone no.+ card no.—Dial the prefix (numbers that must precede the phone

number) and phone number you want to dial, then card number (+ PIN if required)

5. Enter the required information (access number or prefix and card number) and press

OK to confirm your entries.

6. Scroll to Card name and press Select.

7. Enter the card name and press OK.

Note: Contact your calling card company for more information.

Make calls

After you have saved your calling card information in your phone, you can make a call

using your calling card.

1. At the start screen, select Menu > Settings > Call settings > Calling card and press

Select.

2. Enter your lock code and press OK. (See Change the lock code, 71.)

3. Scroll to the calling card of your choice, select Options > Select > OK.

4. Press the End key to return to the start screen; then enter the phone number,

including any prefix (such as 0 or 1), that your calling card may require when you

make a calling card call.

See your calling card for instructions.

5. Press and hold the Talk key for a few seconds until Card call is displayed.

6. When you hear the tone or system message, press OK.

Receive data or fax calls

Data or fax calls is a Network Service. See Network services, 7 for

more information.

If your wireless service provider supports this feature, then you can set up the phone to

send or receive data or fax calls when a terminal, such as a PDA or PC, is connected.

Settings (Menu 4)

For better performance during data calls, place the phone on a stationary surface with

the keypad facing downward. Do not move the phone by holding it in your hand during a

data call.

Note: For more information on connectivity, refer to the PC/PDA Connectivity

Guide. The PC/PDA Connectivity Guide can be downloaded from the Nokia

website at http://www.nokia.com/us.

1. At the start screen, select Menu > Settings > Call settings > Data/fax calls >

Incoming data/fax call > Normal, Data calls only, orFax calls only and press Select:

Normal—The phone receives incoming calls as usual.

Data calls only—The phone receives only data calls.

Fax calls only—The phone receives only fax calls.

2. When you are finished receiving the fax or data call, repeat Steps 1 and 2 and select

Normal.

Data transfer

You can view the transmission speed when sending or receiving data or fax calls.

At the start screen, select Menu > Settings > Call settings > Data/fax calls > Data rate

display > Graphic orOff and press Select.

■Phone settings

Set the display language

1. At the start screen, select Menu > Settings > Phone settings > Phone language and

press Select.

2. Scroll to the language of your choice and press Select.

The language setting affects the time and date formats of the clock, alarm clock, and

calendar.

Use automatic Keyguard

You can set the keypad of your phone to lock automatically after a preset time delay

(from 10 seconds to 60 minutes).

1. At the start screen, select Menu > Settings > Phone settings > Automatic keyguard

> On or Off and press Select.

2. If you selected On, Set delay: appears in the display.

3. Enter the delay (in minutes and seconds) and press OK.

Note: When keyguard is on, it may be possible to dial the emergency number

programmed into your phone. Key in the emergency number and press the Talk

key. The number is displayed only after you have keyed in its last digit.

Touch tones

Touch tones, or DTMF tones, are the tones that sound when you press the keys on your

phone’s keypad. You can use touch tones for many automated dial-up services such as

banking and airlines, or for entering your voice mailbox number and password.

Touch tones are sent during an active call. You can send them manually from your

phone’s keypad, or send them automatically by saving them in your phone.

Set type

1. At the start screen, select Menu > Settings > Phone settings > Touch tones >

Manual touch tones and press Select.

2. Select one of the following options and press Select:

Continuous—the tone sounds for as long as you press and hold a key.

Fixed—Used to send tones of the duration you specify in the Touch tone length

option.

Off—Used to turn off tones. No tones are sent when you press a key.

Set fixed length

You can also specify touch tone length when using the Fixed option.

At the start screen, select Menu > Settings > Phone settings > Touch tones > Touch tone

length > Short (0.1 seconds) or Long (0.5 seconds) and press Select.

Create a welcome note

You can write a welcome note which briefly appears on the display screen whenever you

switch your phone on.

Note: Predictive text input is not available for entering Welcome note text.

1.At the start screen, select Menu > Settings > Phone settings > Welcome note

and press Select.

Settings (Menu 4)

2. Enter a note (up to 44 characters).

Press the * key to display and select from available special characters.

3. When you are finished, press Options > Save, and press Select.

Scroll to Delete and press Select if you want to delete the previous text and begin

creating another welcome note.

Help text

Your phone displays brief descriptions for most menu items. When you arrive at a

feature or menu, pause for about 10 seconds and wait for the help text to display. Use

the scroll keys to page through the full help text, if necessary.

The default setting for Help text is on. However, you can turn help text on or off by

doing the following from the start screen.

At the start screen, select Menu > Settings > Phone settings > Help text activation > On

or Off and press Select.

Send and receive data using IR

You can set up your phone to send or receive data (such as business cards or calendar

notes) through its IR port. To use an IR connection, transmission and reception must be

to or from an IR-compatible phone or device.

Do not point the IR beam at anyone's eye or allow it to interfere with other IR devices.

This device is a Class 1 laser product.

1. Ensure that the IR ports of the sending and receiving devices are pointing at each

other and that there are no obstructions between the devices.

The preferable distance between the

two devices in an IR connection is from 3 inches to 3 feet.

2. At the start screen, select Menu > Settings > Phone settings > Infrared and press

Select.

3. Activate IR on the other device as well.

If data transfer is not started within two minutes after the activation of the IR port, the

connection is cancelled and must be restarted.

■Time and date settings

Time

Show/hide the clock

At the start screen, select Menu > Settings > Time settings > Clock > Show clock or Hide

clock and press Select.

Set the time

1. At the start screen, select Menu > Settings > Time settings > Clock > Set the time

and press Select.

2. Enter the time (in hh:mm format) and press OK.

3. Scroll to am or pm and press Select.

Change the format

At the start screen, select Menu > Settings > Time settings > Clock > Time format > 24-

hour or 12-hour and press Select.

Date

Show/hide the date

At the start screen, select Menu > Settings > Time settings > Date > Show date or Hide

date and press Select.

Set the date

1. At the start screen, select Menu > Settings > Time settings > Date > Set the date and

press Select.

2. Enter the date and press OK.

Change the date format

1. At the start screen, select Menu > Settings > Time settings > Date and press Select.

2. Scroll to the Date separator and press Select.

3. Scroll to the separator of your choice and press Select.

4. Scroll to Date format and press Select.

5. Scroll to the format of your choice and press Select.

Settings (Menu 4)

Set the auto-update of date and time

Auto-update is a Network Service. See Network services, 7 for more information.

If your wireless service provider supports this feature, then you can allow the digital

network to set the clock, which is useful when you are out of your home area, for

instance when you have traveled to another network or time zone.

At the start screen, select Menu > Settings > Time settings > Auto-update of date &

time > On, Confirm first, or Off and press Select.

If you use the Auto-update of date & time option while outside your digital network, you

may be prompted to enter the time manually. Network time will replace the time and

date when you re-enter your digital network.

If your battery has been removed or has drained outside the digital network, you may be

prompted to enter the time manually (once the battery is replaced/recharged, and you

are still outside of the digital network).

■Display settings

Choose a wallpaper

You can set your phone to display a background picture (wallpaper) on the start screen.

1. At the start screen, select Menu > Settings > Display settings > Wallpaper > Select

wallpaper and press Select.

2. Browse the gallery, highlight a folder, and press Open.

3. Browse the folder.

4. When you arrive at the image of your choice, select Options > Set as wallpaper and

press Select.

5. If Replace current wallpaper? appears in the display, press OK.

To activate/deactivate wallpaper, at the start screen, select Menu > Settings > Display

settings > Wallpaper > On or Off and press Select.

Choose a color scheme

You can change the color of some display components in your phone, such as indicators

and signal bars.

1. At the start screen, select Menu > Settings > Display settings > Color schemes and

press Select.

2. Scroll to the color scheme of your choice and press Select.

Choose a banner

Banner is a Network Service. See Network services, 7 for more information.

If your wireless service provider supports this feature, then you can choose whether the

display shows the operator logo when the phone is in the idle state.

At the start screen, select Menu > Settings > Display settings > Banner > Default or

Customize and press Select.

Set the display brightness

You can change the brightness of your phone display.

1. At the start screen, select Menu > Settings > Display settings > Display brightness

and press Select.

2. Use the Left and Right Scroll keys to adjust the contrast level to your preference.

3. Press OK to accept your settings.

Set a time for the screen saver

The screen saver is activated when no function of the phone is used after a preset period

of time. Press any key to deactivate the screen saver. You can set your phone to display a

screen saver after a preset time or after a custom time (up to 60 minutes) of your

choosing.

1. At the start screen, select Menu > Settings > Display settings > Screen saver timeout

and press Select. Scroll to the option of your choice and press Select.

2. If you want to set a custom time (up to 60 minutes), select Other, enter the custom

time, and press OK.

■Enhancement settings

The Enhancement settings menu is shown only if the phone is or has been connected to

a compatible enhancement.

Settings (Menu 4)

At the start screen, select Menu > Settings > Enhancement settings > Headset,

Handsfree,TTY/TDD, or Music stand and press Select.

Handsfree

Scroll to the option of your choice and press Select to enter the option’s submenu and

modify its settings.

Default profile—Choose the profile you wish to be automatically activated when your

phone is connected to a car kit.

Automatic answer—Calls are answered automatically after one ring when a car kit is

connected. Scroll to On or Off and press Select.

Lights—Choose to keep the phone lights always on, or to shut off automatically after

several seconds. Scroll to On or Automatic and press Select.

Headset

Scroll to the option of your choice and press Select to enter the option’s submenu and

modify its settings.

Default profile—Choose the profile you wish to be automatically activated when a

headset is connected

Automatic answer—Calls are answered automatically after one ring when a headset is

connected. Scroll to On or Off and press Select.

TTY/TDD

In addition to the Nokia phone, you will need the following for TTY/TDD communication:

• A TTY/TDD device that is “cellular ready” or “cellular compatible.”

• A cable for connecting the TTY/TDD to your Nokia 3205 phone, usually supplied by

the manufacturer of the TTY/TDD device.

Set up the TTY/TDD profile

You can connect your phone directly to the TTY/TDD device. In order for your phone to

recognize the TTY/TDD, you will need to set up the TTY/TDD profile.

Important: Some manufacturers of TTY/TDD devices suggest that the phone be

least 18 inches from the TTY/TDD device. When connecting to any other device,

read its user guide or contact its manufacturer for detailed instructions and

safety information.

1. Connect one end of the cable to the TTY/TDD device.

2. Insert the other end of the cable into the headset jack on the bottom of the phone.

3. At the start screen, select Menu > Settings > Enhancement settings > TTY/TDD > Use

TTY > Yes and press Select.

TTY/TDD calls

• Check with the manufacturer of the TTY/TDD device for a connecting cable that is

compatible with the Nokia 3205 phone.

• TTY/TDD communications depend on network availability. Check with your service

provider for availability and description of services.

Make a call

1. At the start screen, enter the number and press the Talk key.

2. When the receiving party answers, begin typing your conversation on the TTY/TDD.

3. Press the End key to end the call.

Receive a call

1. Make sure the TTY/TDD device is connected to your phone.

2. Press the Talk key to answer the call, and type your responses on the TTY/TDD.

3. Press the End key to end the call.

Music stand

Scroll to the option of your choice and press Select to enter the option’s submenu and

modify its settings.

Default profile—Choose the profile you wish to be automatically activated when your

phone is connected to the music stand.

Automatic answer—Calls are answered automatically after one ring when the phone is

connected. Scroll to On or Off and press Select.

Lights—Choose to keep the phone lights always on, or to shut off automatically after

several seconds. Scroll to On or Automatic and press Select.

Settings (Menu 4)

■Security settings

Activate or deactivate phone lock

The phone lock feature protects your phone from unauthorized outgoing calls or

unauthorized access to information stored in the phone. When phone lock is activated,

Phone locked is displayed each time you turn your phone on or off.

When the phone is locked, calls still may be possible to the official emergency number

programmed into your phone.

1. At the start screen, select Menu > Settings > Security settings > Access codes >

Phone lock and press Select.

2. Enter the lock code and press OK.

See Change the lock code, 71 for more information on the lock code.

3. Scroll to one of the following options and press Select:

On power-up turns the phone lock feature on immediately after the phone is

powered up.

Lock now immediately turns on the phone lock feature.

Off immediately turns off the phone lock feature.

If you selected On power-up or Lock now, you must enter your lock code before the

phone will function normally. Once the lock code has been accepted, your phone

functions normally.

Important: Call not allowed is displayed if you attempt to place a call while

phone is locked.

To answer a call with phone lock on, press Answer or the Talk key.

Allow numbers when phone locked

When phone lock is on, the only outgoing calls that can be made are to the following

numbers:

• The emergency number programmed into your phone (for example, 911 or other

official emergency number).

• The number stored in the Allowed no. when phone locked location.

1. At the start screen, select Menu > Settings > Security settings > Access codes >

Allowed no. when phone locked and press Select.

2. Enter the lock code and press OK. (See Change the lock code, 71.)

3. Enter the phone number or press Search and recall the number from the phone book,

and press OK.

Call the allowed phone number

1. At the start screen, press the Up or Down Scroll key.

2. Press the Talk key to place the call.

Change the lock code

The default lock code is 1234 or the last four digits of your phone number. If you enter

an incorrect lock code five times in a row, your phone will prompt you for the security

code.

1. At the start screen, select Menu > Settings > Security settings > Access codes >

Change lock code and press Select.

2. Enter the current (or default) lock code and press OK.

3. Enter the new lock code and press OK.

4. Reenter the new lock code for verification and press OK.

Note: When you change your lock code, make sure you store it in a safe place,

away from your phone. Avoid entering access codes similar to emergency

numbers to prevent accidental emergency calls.

Restrict calls

Call restriction is a Network Service. See Network services, 7 for

more information.

If your wireless service providers supports this feature, then you can restrict the calls

your phone can make and receive. When calls are restricted, calls still may be possible to

the official emergency number programmed into your phone.

Note: Contact your service provider for the restriction password.

1.At the start screen, select Menu > Settings > Security settings > Call

restrictions and press Select.

Settings (Menu 4)

2. Enter the security code and press OK.

3. Scroll through the types of calls you can restrict, and press Select:

Restrict outgoing calls—Calls cannot be made.

Restrict incoming calls—Calls cannot be received.

4. Scroll to an option (Select, Add restriction, Edit, or Delete) and press Select.

Security code

Note: Avoid using codes similar to emergency numbers such as 911 to prevent

accidental dialing of the emergency number.

The security code controls access to features such as the security level and is supplied

with the phone. The preset code is 12345. Once you change the security code, keep the

new code secret and in a safe place separate from your phone.

Note: If you enter the wrong security code five times in succession, you will not

be able to enter a code for five minutes, even if you power off the phone

between incorrect entries.

1. At the start screen, select Menu > Settings > Security settings > Access codes >

Change security code and press Select.

2. Enter the current security code (default is 12345) and press OK.

3. Enter the new security code (up to 10 characters) and press OK.

4. Enter the new security code again and press OK.

Voice privacy

Voice privacy is a Network Service. See Network services, 7 for more information. If your

wireless service provider supports this feature, the voice privacy feature protects the

privacy of your current phone conversation from other callers placing phone calls on

your same network.

At the start screen, select Menu > Settings > Security settings > Voice privacy > On or

Off and press Select.

■Network services

The following features are Network Services. See Network services, 7 for more

information.

Store a feature code

1. At the start screen, select Menu > Settings > Network services > Network feature

setting and press Select.

2. Enter the feature code from your service provider (for example, *900 for activating

Forward if busy) and press OK.

3. Press Select when Call forwarding is displayed.

4. Scroll to the type of forwarding that matches the feature code you entered (for

example, Forward if busy), press Select, then press Activate.

The activated feature code is now stored in your phone, and you are returned to the

Feature code: field. Continue entering other feature codes (for example, *900 to

cancel Forward if busy), or press the End key to return to the start screen.

Note: Once you enter a network feature code successfully the feature becomes

visible in the Network services menu.

Call forwarding

Call forwarding tells your network to redirect incoming calls to another number. Call

forwarding is a Network Service and may not work the same in all networks, so contact

your wireless provider for availability.

Activate

Note: This is a Network Service. All options listed may not appear in the

display. Contact your wireless provider for more information.

1. At the start screen, select Menu > Settings > Network services > Call forwarding and

press Select.

2. Select one of the following options:

Forward all calls—Forward all calls to the number you specify.

Forward if busy—Forward incoming calls when you are in a call.

Forward if not answered—Forward incoming calls to another number if you are

unable to answer. You can set a delay before forwarding takes place.

Forward if out of reach—Forward incoming calls when your phone is off.

Cancel all call forwarding—Cancel any call forwarding options you have set.

3. Scroll to Activate and press Select.

Settings (Menu 4)

4. Scroll to the destination to which your calls will be forwarded

and press Select.

5. Enter the number to which your calls, data, or other information will be forwarded

and press OK.

Cancel

At the start screen, select Menu > Settings > Network services > Call forwarding >

Cancel all call forwarding and press Select.

Note: Cancel all call forwarding may affect your ability to receive voice mail

messages. Contact your wireless provider for specific details.

Call waiting

If your wireless provider supports this feature, call waiting notifies you of an incoming

call even while you are in a call. You can then accept, reject, or ignore the incoming call.

1. During a call, press Answer or the Talk key to answer the waiting call.

The first call is put on hold.

2. Press the End key to end the active call.

Send own caller ID when calling

If your wireless service provider supports this feature, then you can prevent your

number from appearing on the receiving party’s caller ID.

At the start screen, select Menu > Settings > Network services > Send my caller identity

> Yes or No and press Select.

View your own phone number

At the start screen, select Menu > Settings > Network services > Own number selection

and press Select.

■Tone settings

From this menu, you can adjust the ringing volume, keypad tones, and other tone

settings for the currently active profile. See “Customize a profile” on page 39 for more

information on Profile settings.

■Restore factory settings

You can reset some of the menu settings to their original values. Data that you have

entered or downloaded is not deleted, for example, entries in your contacts list are not

affected.

1. At the start screen, select Menu > Settings > Restore factory settings and press

Select.

2. Enter the security code (the default security code is 12345) andpress OK.

Network (Menu 5)

9. Network (Menu 5)

The menu options you see in your phone are based on your service provider’s network.

The network determines which options actually appear in the phone’s menu. Check with

your service provider for more information.

The Network menu allows you to customize the way your phone chooses a network in

which to operate while you are within or outside of your primary or home system. Your

phone is set to search for the most cost-effective network. If your phone can’t find a

preferred network, it selects a network automatically based on the option you choose in

the Network menu.

■Roaming options

You can set your phone to “roam” or search for another network when you are not in

your home area.

1. At the start screen, select Menu > Network > Roaming options and press Select.

2. Scroll to one of the following options and press Select:

Home only—You can make and receive calls in your home area only. While roaming,

No service appears and you cannot make or receive calls.

Automatic—Your phone automatically selects the best available network.

3. Press OK, if necessary, to confirm the activation.

■Mode

You can choose whether your phone uses digital or analog service.

1. At the start screen, select Menu > Network > Mode and press Select.

2. Scroll to one of the service options and press Select:

Digital preferred—The phone works in digital mode, but will also work in analog

mode when digital mode is unavailable.

Digital only—The phone only works in digital mode.

Analog only—The phone only works in analog mode.

10. Radio (Menu 6)

The FM radio uses the wire of the HDS-3 Stereo headset as an

antenna. A compatible headset needs to be attached to the device for the FM radio to

function properly.

Note: Listen to music at a moderate level. Continuous exposure to high volume

may damage your hearing.

■Turn on and off

1. To turn on the radio, at the start screen, select Menu > Radio and press Select.

2. To turn off the radio, press and hold the End key.

■Options

Note: When you place or receive a call, the radio automatically mutes. Once

the call is ended, the radio switches back on.

1. With the radio on, press Options to choose from the following options:

Turn off—Turn off the radio.

Save channel—Save the current station to one of 20 locations.

Automatic tuning:—Briefly press either scroll key to start the channel search up or

down. Press OK when a channel is found.

Manual tuning:—Scroll to search frequencies in increments of 0.1 MHz.

Set frequency—Manually enter the frequency of a known radio station.

Delete channel—Delete a saved channel.

Loudspeaker—Listen to the radio through the speakerphone.

Mono output/Stereo output—Listen to the radio in monaural mode (default) or in

stereo. Stereo output is available through an optional stereo enhancement.

2. Scroll to an option, and press Select to activate the option or enter its submenu.

Radio (Menu 6)

■Save a channel

You can save a preset station to any one of 20 locations in memory, and scroll to tune to

that station with the radio on.

1. With the radio on, scroll to start the channel search.

Searching stops when a channel is found.

2. To save the channel, select Options > Save channel and press Select.

3. Enter a name for the channel and press OK.

4. Scroll to an (empty) location to save the channel and press Select.

11. Camera (Menu 7)

With the phone’s built-in camera, you can take a photo and save

the photo to the Gallery menu or attach the photo to an entry in your contacts list. The

camera lens is on the back of the phone, and the display of the phone works as a

viewfinder. The camera produces JPEG images.

■Take a photo

1. At the start screen, select Menu > Camera > Standard

photo, Portrait photo or Night mode and press Select.

Standard photo—When you want to take normal landscape

photos.

Portrait photo—When you want to take a smaller icon-

sized, vertical photo, which can be added to an entry in

your contacts list.

Night mode—To take a photo when the lighting is dim and the camera needs a

longer exposure time for the photo to be of good quality.

2. Press Capture to take the photo.

When taking a photo, a shutter sound is heard. The phone saves the photo in the

Images folder of the Gallery menu. The saved photo is shown on the display.

3. Select Back to take another photo, or press Options and choose from one of the

following:

Zoom—Get a closer look at the captured photo; use the Four-way scroll key to

navigate around the photo.

Delete—Erase the captured photo from the Images folder in the Gallery menu.

Send—Send this photo

Rename—Enter or edit the name of the captured photo and press OK.

Open Gallery—Open the Images folder in the Gallery menu.

Change mode—Change from Standard photo to Portrait photo or vice versa.

Camera (Menu 7)

Set contrast—Use the Right or Left scroll keys to adjust the contrast of the captured

photo.

Set as wallpaper—Set the captured photo as your phone’s wallpaper.

Details—View the Name, Size, Date, Time, Resolution, Format, or Protected of the

photo.

■Self-timer

You can set the timer on the camera to delay for approximately 10 seconds before

capturing the photo.

1. At the start screen, select Menu > Camera > Self-timer > Standard photo, Portrait

photo, or Night mode and press Select.

2. Press Start.

A beep sounds while the self-timer is running, and beeps faster when the camera is

about to capture the photo. After the timeout, the camera takes the photo and saves

the photo in the Images folder of the Gallery menu.

■Settings

1. At the start screen, select Menu > Camera > Settings and press Select.

2. Scroll to one of the following options and press Select:

Default mode—Scroll to Standard photo, Portrait photo, or Night mode as the

default and press Select.

Image quality—Scroll to High, Normal, or Basic and press Select.

Camera sounds—Scroll to On or Off and press Select.

Default title—Select Automatic to use a predefined title or My title to key in or edit a

new title.

12. Gallery (Menu 8)

You can save pictures and ringing tones to folders in the gallery,

or create folders of your own and save them there. You can download images and tones

using MMS, web sites, or Nokia PC Suite.

■Open the gallery

At the start screen, select Menu > Gallery and press Select. The following submenus are

displayed:

View folders—Explore the folders in the gallery menu. See View folders in the following

section for more info.

Add folder—Add a folder of your own.

Delete folder—Delete a folder you have created.

Rename folder—Rename a folder you have created.

Downloads—Use the image, graphic, and tone downloads in your phone.

Note: If your wireless service provider supports the Gallery downloads feature,

then the phone tries to connect to the mobile internet using your web browser

and the currently active set of gallery downloads. If the connection fails, you

may need to activate another set or change the current settings. See

Minibrowser (Menu 11), page 89 for more information.

■View folders

1. At the start screen, select Menu > Gallery > View folders > Images, Graphics, or

Tones and press Open.

2. Scroll through the list of images or tones, press Options > Select to activate the

option (Open, Send, Delete, Edit image, Move, Rename folder, Set as wallpaper/Set

as ring tone, Details or Sort) or to enter its submenu.

Games (Menu 9)

13. Games (Menu 9)

Challenge yourself or a friend to one of the fun games in your

phone.

Note: Some menus listed are Network Services. Contact your wireless provider

for more information.

■Play a game

1. At the start screen, select Menu > Games > Select game and press Select.

2. Scroll to a game and press the Talk key.

3. Scroll to one of the following options (if supported by the particular game) and press

Select:

New game—Launches a new game.

High score—View the high scores for this game (if previously played).

Instructions—View instructions for playing the game. Use the Scroll down key to

■Game settings

1. At the start screen, select Menu > Games and press Select.

2. Scroll to one of the following game submenus:

Select game—Select a game or enter a game’s option list. See “Game options” below

for more information.

Memory—Check the available memory for games and game-related applications.

Settings—Turn Game sounds, Game lights, and Shakes on or off.

3. Press Select to enter the submenu and choose other settings.

■Game options

1. While viewing the games list, press Options.

2. Scroll to an option (Open, Delete, or Details) and press Select to activate the option

or enter a submenu.

Voice (Menu 10)

14. Voice (Menu 10)

■Voice dialing

You can dial up to 25 stored numbers using voice dialing.

Before using voice tags, note that:

• Voice tags are not language dependent. They are dependent on the speaker’s voice.

• You must say the name exactly as you said it when you recorded it.

• Voice tags are sensitive to background noise. Record voice tags and use them in a

quiet environment.

• Very short names are not accepted. Use long names and avoid similar names for

different numbers.

Note: Using voice tags may be difficult in a noisy environment or

during an emergency, so you should not rely solely upon voice dialing

in all circumstances.

Assign a voice tag to an entry

Before you can use voice dialing, you must first assign a voice tag to the number.

1. At the start screen, use the Scroll down key to enter the contacts list.

2. Highlight the contact you want to assign a voice tag, press Details > Options > Add

voice tag > Start.

3. Speak clearly into the microphone.

Note: Do not press Quit unless you want to cancel the recording.

The phone automatically stops recording and saves and replays the voice tag.

The icon appears next to commands which have voice tags assigned.

If recording is not successful, your phone displays Voice system error. Press Options >

Add voice tag and repeat Step 3.

Dial a number

1. Press and hold Contacts (or Go to).

2. When you hear several beeps and Speak now appears, release the key.

3. Pronounce the voice tag clearly into the microphone.

When the phone finds the voice tag, Found: appears, and the phone automatically

dials the number. If the phone does not locate a number or recognize the voice tag,

No match found appears.

Voice tags

After you have associated a voice tag to a contact, you can choose one of the following

options:

Play back

1. Press Menu > Voice > Voice tags and press Select.

2. Press Select, then scroll to the name with the voice tag you want to hear.

3. Press Options > Playback and press Select.

Change

1. Press Menu > Voice > Voice tags and press Select.

2. Press Select, then scroll to the name with the voice tag you want to change.

3. Press Options > Change and press Select.

4. Press Start. The phone repeats your voice tag, and Voice tag saved appears.

Delete

1. Press Menu > Voice > Voice tags and press Select.

2. Press Select, then scroll to the name with the voice tag you want to erase.

3. Press Options >Delete and press Select. Delete voice tag? appears.

4. Press OK to erase the voice tag.

■Voice commands

You can set as many as five voice commands, which allow handsfree operation of

certain phone features.

Add a voice tag

Before using voice commands, you must first add a voice tag to the phone function.

Voice (Menu 10)

1. At the start screen, select Menu > Voice > Voice commands and press Select.

2. Scroll to the phone function you wish to tag (Profiles, Voice mailbox, Radio, Infrared,

Voice recorder or Call log) and press Select.

3. If necessary, scroll to an option associated with that function and press Select.

4. Press Options > Add command and press Select.

5. Press Start, and speak the voice tag clearly into the microphone.

Note: Do not press Quit unless you want to cancel the recording.

The phone replays and then saves the recorded tag. The icon appears next to

commands which have voice tags assigned.

Activate a voice command

After you have associated a voice tag with a phone function, you can issue a command

by speaking the voice tag.

1. Press and hold Contacts (orGo to).

2. When Please speak now appears, pronounce the voice tag clearly into the

microphone.

When the phone finds the voice tag, Found: appears, and the phone plays the

recognized voice tag through the earpiece. The function you requested is activated.

Options

After you have associated a voice tag to a command, you can choose one of the

following options:

• Select Playback to listen to the voice command tag.

• Select Change to change the voice command.

• Select Delete to erase the voice command tag.

■Voice recorder

This feature allows you to record pieces of speech or sound with your phone and listen

to them later. The total available time is 180 seconds if no memos have been stored. The

maximum length of a recording depends on how much memory remains available.

Record speech or sound

1. At the start screen, select Menu > Voice > Voice recorder > Record and press Select.

2. After the recorder start tone is heard, begin recording speech or sound.

3. When you are finished recording, press Stop.

4. Enter the title you wish to assign to the recording and press OK.

Options

After you have saved the recording to the Recordings list, highlight the recording and

choose one of the following options:

• Select Playback to listen to the recording using the earpiece.

• Select Delete to erase the recording.

• Select Edit title to rename the recording.

• Select Add alarmto add an alarm to the recording.

Minibrowser (Menu 11)

15. Minibrowser (Menu 11)

Minibrowser is a Network Service. See Network services, 7 for

more information.

Your phone has a built-in browser you can use to connect to selected services on the

mobile internet. If your wireless service provider supports this feature, then you can

view weather reports, check news or flight times, view financial information, and much

more. The web browser on your phone can display WAP-based content.

Your device may have some bookmarks loaded for sites not affiliated with Nokia. Nokia

does not warrant or endorse these sites. If you choose to access them, you should take

the same precautions, for security and content, as you would with any internet site.

■Mobile internet access

Because mobile internet content is designed to be viewed from your phone, your

wireless provider is now your “mobile internet service provider” as well.

It is likely that your wireless provider has created a home page and set up your browser

to go to this page when you log on to the mobile internet. Once at your service

provider’s home page, you may find links to a number of other sites.

It should not be necessary to manually configure the browser on your phone. Normally

this is done by your wireless provider once you have subscribed to the feature. Contact

your wireless provider if you have problems using the browser.

■Sign on to the mobile internet

At the start screen, select Menu >Minibrowser > Connect.

After a brief pause, your phone attempts to connect to your wireless provider’s home

page. If you receive an error message, your phone may not be set up for browsing.

Contact your wireless provider to make sure that your phone is configured properly.

■Navigate the mobile internet

Since your phone screen is much smaller than a computer screen, mobile internet

content is displayed differently than you may be accustomed to seeing. This section

contains guidelines for using phone keys to navigate a WAP site.

Phone keys

• To browse the WAP site, press the Scroll up key or the Scroll down key.

• To select a highlighted item, press Select.

• To enter letters and numbers, press a key from 0–9.

• To enter special characters, press the * key.

Receive a call while online

Depending on your wireless service provider, you may still be able to receive a voice call

while using the WAP browser.

• To answer the incoming call, press the Talk key.

• To reject the incoming call, press the End key.

After you end your voice call, the mobile internet connection automatically resumes.

Note: If your wireless service provider does not support incoming calls while

browsing, then the incoming calls are automatically diverted to voice mail.

Make an emergency call while online

You can end your data connection and then make an emergency call.

1. To close your mobile internet connection, simply press the End key.

2. Press the End key as many times as needed to clear the display and ready the phone

for calls.

3. Enter the emergency number for your present location (for example, 911).

Emergency numbers vary by location.

4. Press the Talk key.

Disconnect

To close your mobile internet connection, press and hold the End key.

Organizer (Menu 12)

16. Organizer (Menu 12)

Your phone contains features to help organize your everyday life,

including an alarm clock, calendar, to-do list, calculator, countdown timer, and calorie

calculator.

■The alarm clock

Set an alarm

The alarm clock is based on the phone clock. It sounds an alert any time you specify and

even works if the phone is turned off.

If an alarm has not been set

1. At the start screen, select Menu > Organizer > Alarm clock > Alarm time and press

Select.

2. Enter the time for the alarm in hh:mm format and press OK.

3. Scroll to am or pm and press Select.

Alarm on appears briefly in the display and appears on the start screen.

If an alarm has previously been set

1. At the start screen, select Menu > Organizer > Alarm clock > Alarm time > On and

press Select.

2. Enter the time for the alarm in hh:mm format and press OK.

3. Scroll to am or pm and press Select.

Alarm on appears briefly in the display and appears on the start screen.

Alarm conditions

When the alarm sounds, your phone beeps, vibrates, and the display lights up.

With the phone on, press Stop to shut the alarm off, or press Snooze. The alarm stops for

10 minutes and Snooze on appears in the display.

Note: If you do not press a key, the alarms stops (snoozes) for 5 minutes, and

then sounds again.

If the alarm time is reached while the phone is switched off, the phone switches itself

on and starts sounding the alarm tone. If you press Stop, the device asks whether you

want to activate the phone for calls. Press No to switch off the device or Yes to make

and receive calls. Do not press Yes when wireless phone use may cause interference or

danger.

Turn an alarm off

At the start screen, select Menu > Organizer > Alarm clock > Alarm time > Off and press

Select.

■The calendar

The calendar keeps track of reminders, calls you need to make, meetings, and birthdays.

It can even sound an alarm for any of these events.

Monthly view provides an overview of the selected month and weeks. It also allows you

to jump to a specific date. Any days or dates that appear in bold font contain calendar

notes such as a meeting or reminder.

Open

At the start screen, select Menu > Organizer > Calendar and press Select.

Note: To open the calendar quickly, press the Scroll right key from the start

screen.

You can move the cursor in some calendar views by using the Four-way scroll keys.

Go to a date

1. At the start screen, select Menu > Organizer > Calendar > Options > Go to date and

press Select.

2. Enter the date (for example, 09/15/2003) and press OK.

Note a specific date

You can choose from five types of notes: Meeting, Call, Birthday, Memo, and Reminder.

Your phone asks for further information depending on which note you choose. You also

have the option to set an alarm for any note that you select.

Organizer (Menu 12)

1. Go to the date for which you want to set a reminder. (See *** 'Go to a date' on page

93 *** in the previous section if you need more information.)

2. From the monthly view (with the go to date highlighted), select Options > Make a

note and press Select.

3. Scroll to one of the following note types and press Select:

Meeting—You are prompted to enter a subject, location, and a start/end time. You

are then given the option to set an alarm.

Call—You are prompted to enter a phone number, a name, and the time. You are

then given the option to set an alarm.

Birthday—You are prompted to enter the person’s name, and year of birth. You are

then given the option to set an alarm.

Memo—You are prompted to enter a subject and an end date. You are then given the

option to set an alarm.

Reminder—You are prompted to enter the subject you wish to be reminded about,

you are then given the option to set an alarm.

4. Enter your note, select Options > Save and press Select.

View notes (day view)

After you have created some calendar notes, you can view them as follows:

1. At the start screen, select Menu > Organizer > Calendar and press Select.

2. Scroll to the date containing the note.

Any days containing notes will be in bold font.

3. Press Options > View day and press Select.

4. To view a highlighted note, press Options > View and press Select.

Options while viewing a list of notes

1. Press Options while viewing a day’s notes to display the following options:

The options listed below are available either while viewing the body of a note or

viewing the header of a note.

View—View the full note.

Make a note—Create a new note for the selected date.

Delete—Delete the note.

Edit—Edit the note.

Move—Move the note to another date on your calendar.

Repeat—Enable the note to recur on a regular basis (daily, weekly,

bi-weekly, monthly, and yearly).

Go to date—Jump to another date on your calendar.

Send note—send the note to another device via Infrared, text message, or in vCal

format.

Copy—Copy the note. You can then paste the note to another date.

Settings—Set the date and time, date and time format, the day each week starts and

whether you want your notes to auto-delete after a specified time.

Go to to-do list—Takes you to the to-do list for the selected date.

2. Scroll to an option and press Select to activate it or enter its submenu.

Send a note

Note: If sending a note using IR, ensure the other device is set to receive data

using IR. For more information on enabling the IR of the receiving device, refer

to the user guide for the receiving device.

1. At the start screen, select Menu > Organizer > Calendar and press Select.

2. Scroll to the date containing the note you wish to send.

Any days containing notes will be in bold font.

3. Press Options > View day and press Select.

4. Scroll to the note you wish to send, and select Options > Send note > Via infrared,

Via calendar, or Via text message and press Select.

5. If you selectedVia infrared, activate the infrared port of the other device, align the

infrared ports of both devices, and press Select.

6. If you selected Via calendar, enter the number for the recipient, or press Find to

retrieve a number from the contacts list, and press OK. The note is sent.

7. If you selected Via text message, the note appears in the display.

Organizer (Menu 12)

8. Scroll to Add number and press Select.

9. Enter the number for the recipient, or press Search to retrieve a number from the

contacts list, and press OK.

10. Press Options > Send and press Select.

Receive notes

When you receive a Calendar note, your phone displays Calendar note received. You can

then save the note in your Calendar and set an alarm for any date and time.

View notes

1. When your phone displays Calendar note received, press Show.

2. Scroll to view the entire message, if necessary.

Save notes

After viewing the calendar note, select Options > Save and press Select.

Discard notes

After viewing the calendar note, select Options > Discard and press Select.

■The to-do list

You can keep track of your tasks with the to-do list feature. You may be able to save up

to 30 notes, depending on their length. To-do notes are not related to specific dates.

Add a to-do note

1. At the start screen, select Menu > Organizer > To-do list > Options.

If this is your first time to use the to-do list, Add is highlighted.

2. Press Select, enter your to-do note, and press Options > Save > High, Medium, or

Low (priority) and press Select.

Options while viewing to-do notes

Press Options while viewing the header of a note or the body of a note and press Select

to activate an option or enter its submenu.

■The calculator

The calculator in your phone adds, subtracts, multiplies, divides, calculates the square

and the square root and converts currency values.

Note: This calculator has a limited accuracy and is designed for simple

calculations.

1. At the start screen, select Menu > Organizer > Calculator and press Select.

2. Enter the first number in the calculation.

Press the # key for a decimal point if necessary.

Press the * key to cycle through the add (+), subtract (-), multiply (*), and divide (/)

characters. Pause briefly to select the displayed character.

To perform a square or square root calculation, press Options > Square or Square

rootand press Select.

3. Enter the second number in your calculation.

4. Press Options (equals is highlighted) and press Select.

■The countdown timer

You can enter a specified time (up to 99 hours and 59 minutes). When the time runs out,

your phone sounds an alarm.

Note: The countdown timer only works when the phone is on. Once you turn

off your phone, the timer is no longer active.

Set the countdown timer

1. At the start screen, select Menu > Organizer > Countdown timer and

press Select.

2. Enter the time (in hh:mm format) and press OK.

3. Enter a note for the timer and press OK.

The icon appears on the start screen when the countdown timer is set.

When the time runs out, your phone sounds an alarm, displays the timer note, and

flashes its lights.

• Press any key during the alarm to stop the timer.

Organizer (Menu 12)

• After 30 seconds the timer alert expires automatically.

Change the time

After you have set the timer, you can change the time.

1. At the start screen, select Menu > Organizer > Countdown timer > Change time and

press Select.

2. Enter the new time and press OK.

3. Leave the note as it was, or enter a new note and press OK.

Stop the timer before the alarm sounds

After you have set the timer, you can stop the timer.

At the start screen, select Menu > Organizer > Countdown timer > Stop timer and press

Select.

■The stopwatch

Your phone has a stopwatch that can be used to track time. The stopwatch displays time

in hours, minutes, seconds and fractions of a second in hh:mm:ss:s format.

Using the stopwatch or allowing it to run in the background when using other features

increases the demand on battery power and reduces the battery life.

Measure time

1. At the start screen, select Menu > Organizer > Stopwatch > Split timing and press

Select.

2. Press Start to begin split timing.

The running time is displayed on the screen.

3. Press Stop to end the timing.

The total time is displayed on the screen.

Measure split time

You can use the split time function for such things as a long distance race when you

need to pace yourself.

1. At the start screen, select Menu > Organizer > Stopwatch > Split timing > Start.

2. Press Split to note the lapsed time.

The timer continues to run. The split time appears below the running time. If you

split the time more than once, the new measured time appears at the beginning of

the list. You can scroll to see previous measured times.

3. Press Stop to end the split timing.

To reset the clock, select Options > Reset and press OK.

Measure lap time

You can use the lap time function when you want to track how long it takes to complete

each cycle or lap.

1. At the start screen, select Menu > Organizer > Stopwatch > Lap timing > Start.

2. Press Lap to note the lap time.

The clock stops, then starts immediately from zero. The lap time appears below the

running time. If you take more than one lap time, the new measured time appears at

the beginning of the list. You can scroll to see previous measured times. When you

press Stop, the total time appears at the top.

To reset the clock, select Options > Reset and press OK.

Save the lap time

1. While the clock is running, press Stop > Options > Save and press Select.

2. Enter a name for the measurement and press OK.

If you do not enter a name, the total time is used as the default title for the lap time.

Other options

You can choose the following options when using the stopwatch:

Start—Shows up when the stopwatch is working in the background.

Show last time—Allows you to view the last measured time.

View times—Allows you to browse the saved times.

Delete times—Allows you to delete any saved times. You can delete the saved times one

by one or all at once.

Organizer (Menu 12)

Operation note

If you press the End key and return to the start screen, the clock continues to run in the

background and the icon appears in the upper left corner of the screen.

To return to the stopwatch screens:

1. At the start screen, select Menu > Organizer > Stopwatch >Continue and press

Select.

2. To stop the clock, press Stop.

■The calorie calculator

The calorie calculator estimates the amount of energy used in various physical

activities. The energy used depends on age, weight, and gender. You can save up to 10

activities in your phone.

The calorie calculator provides general measurements for personal use that may vary

from scientific measurements.

Save personal data

1. At the start screen, select Menu > Organizer > Calorie calculator > Settings and

press Select.

2. Enter Weight, Age, Gender, and if desired, change the Weight format.

3. Press OK or Select after each entry to save the data.

Select an activity

1. At the start screen, select Menu > Organizer > Calorie calculator > Activities > Add

new, or press Options > Add new.

2. Scroll to an activity and press Select.

3. If prompted, scroll to an intensity level and press Select.

4. Enter the duration of the activity (in hh:mm format) and press OK.

5. Press OK to save the activity.

Edit and delete activities

1. To edit activities, press Options while in the Activities menu.

2. You can now add a new activity, edit an existing one, count the total calorie

amount, or delete an activity.

3. To delete all activities at once, select Menu > Organizer > Calorie calculator >

Delete all > OK.

Applications (Menu 13)

17. Applications (Menu 13)

Applications is a Network Service. See Network services, 7 for

more information.

If your wireless service provider supports this feature, you will find useful Java utilities

pre-installed on your phone. Also, you can manage and download new Java applications

that may be offered by your wireless provider.

■Launch

1. At the start screen, select Menu > Applications > Select application and press

Select.

2. Scroll to an application and press Options, highlight Open, then press Select or the

Talk key.

Note: An application may require a few seconds to load. When you open an

application, wait for the launch screen to disappear. At that point, the

application is ready.

■Download

You can download new Java applications in different ways.

Note: Only install applications from sources that offer adequate protection

against harmful software.

Note: When you download a game or an application, it may be saved in the

Games menu instead of the Applications menu.

Browser downloads

1. At the start screen, select Menu > Applications > App. downloads and press Select.

2. Press Select to access the list of web browser bookmarks.

3. Scroll to the appropriate bookmark that contains the application you wish to

download, and press Select to connect to the web page.

If the connection fails, you may enter the Applications menu and activate another

set of service settings.

PC Suite

Use the Java Application installer from PC Suite to download the applications in your

phone.

■Memory status

You can view the size of memory available for game and application installations. At the

start screen, select Menu > Applications > Memory and press Select.

Enhancements

18. Enhancements

Check the model number of any charger before use with this

device. This device is intended for ufse when supplied with

power from ACP-12.

Caution: Use only batteries, chargers and enhancements approved by Nokia

for use with this particular model. The use of any other types may invalidate

any approval or warranty, and may be dangerous. For availability of approved

enhancements, please check with your dealer.

Your device and its enhancements may contain small parts. Keep them out of reach of

small children.

A few practical rules about accessories and enhancements:

• Keep all accessories and enhancements out of the reach of small children.

• When you disconnect the power cord of any accessory or enhancement, grasp and

pull the plug, not the cord.

• Check regularly that enhancements installed in a vehicle are mounted and are

operating properly.

• Installation of any complex car enhancements must be made by qualified personnel

only.

Power

• Standard 780-mAh Li-Ion Battery (BLD-3)

• Travel Charger (AC-1)

• Standard Travel Charger (ACP-7)

• Rapid Travel Charger (ACP-12)

• Battery Charging Stand (DDC-1)

Audio

• Music Stand (DT-1)

• Headset (HS-5)

• Retractable Headset (HS-10)

• Boom Headset (HDB-4)

• Stereo Headset (HDS-3)

• Fashion Stereo Headset (HS-3)

• Loopset (LPS-4)

• TTY Adaptor (HDA-10)

Data

• Data Cable (DKU-5)

• Desk Stand with Sync (DCV-14)

Car

• Advanced Car Kit (CK-6)

• Mobile Lighter Charger (LCH-12)

• Headrest Handsfree (BHF-1)

• Covers and carrying

• Cut-Out Color Covers

• Carry Cases

Reference information

19. Reference information

This section provides information about your phone’s batteries, enhancements,

chargers, safety guidelines and technical information. Be aware that the information in

this section is subject to change as batteries, chargers, and enhancements change.

■Batteries and chargers

Your device is powered by a rechargeable battery. The full performance of a new battery

is achieved only after two or three complete charge and discharge cycles. The battery

can be charged and discharged hundreds of times but it will eventually wear out. When

the talk and standby times are noticeably shorter than normal, buy a new battery. Use

only Nokia approved batteries, and recharge your battery only with Nokia approved

chargers designated for this device.

Unplug the charger from the electrical plug and the device when not in use. Do not

leave the battery connected to a charger after the battery has finished charging.

Overcharging may shorten its lifetime. If left unused, a fully charged battery will lose its

charge over time. Temperature extremes can affect the ability of your battery to charge.

Use the battery only for its intended purpose. Never use any charger or battery that is

damaged.

Do not short-circuit the battery. Accidental short-circuiting can occur when a metallic

object such as a coin, clip, or pen causes direct connection of the positive (+) and

negative (-) terminals of the battery. (These look like metal strips on the battery.) This

might happen, for example, when you carry a spare battery in your pocket or purse.

Short-circuiting the terminals may damage the battery or the connecting object.

Leaving the battery in hot or cold places, such as in a closed car in summer or winter

conditions, will reduce the capacity and lifetime of the battery. Always try to keep the

battery between 59°F and 77°F (15°C and 25°C). A device with a hot or cold battery may

not work temporarily, even when the battery is fully charged. Battery performance is

particularly limited in temperatures well below freezing.

Do not dispose of batteries in a fire! Dispose of batteries according to local regulations.

Please recycle when possible. Do not dispose as household waste.

Care and maintenance

Your device is a product of superior design and craftsmanship and should be treated

with care. The suggestions below will help you protect your warranty coverage and

enjoy your device for many years.

• Keep the device dry.

• Do not use or store the device in dusty, dirty areas. Its moving parts and electronic

components can be damaged.

• Do not store the device in hot areas. High temperatures can shorten the life of

electronic devices, damage batteries, and warp or melt certain plastics.

• Do not store the device in cold areas. When the device returns to its normal

temperature, moisture can form inside the device and damage electronic circuit

boards.

• Do not attempt to open the device other than as instructed in this guide.

• Do not drop, knock, or shake the device. Rough handling can break internal circuit

boards and fine mechanics.

• Do not use harsh chemicals, cleaning solvents, or strong detergents to clean the

device.

• Do not paint the device. Paint can clog the moving parts and prevent proper

operation.

• Use only the supplied or an approved replacement antenna. Unauthorized antennas,

modifications, or attachments could damage the device and may violate regulations

governing radio devices.

All of the above suggestions apply equally to your device, battery, charger, or any

enhancement. If any device is not working properly, take it to the nearest authorized

service facility for service.

Additional safety information

■Operating environment

Remember to follow any special regulations in force in any area and always switch off

your device when its use is prohibited or when it may cause interference or danger. Use

the device only in its normal operating positions.

To maintain compliance with radio frequency exposure guidelines only use

enhancements approved by Nokia for use with this device. When the device is on and

being worn on the body, always use an approved carrying case.

■Medical devices

Operation of any radio transmitting equipment, including wireless phones, may

interfere with the functionality of inadequately protected medical devices. Consult a

physician or the manufacturer of the medical device to determine if they are adequately

shielded from external RF energy or if you have any questions. Switch off your phone in

health care facilities when any regulations posted in these areas instruct you to do so.

Hospitals or health care facilities may be using equipment that could be sensitive to

external RF energy.

PACEMAKERS

Pacemaker manufacturers recommend that a minimum separation of 6 in (15.3 cm) be

maintained between a wireless phone and a pacemaker to avoid potential interference

with the pacemaker. These recommendations are consistent with the independent

research by and recommendations of Wireless Technology Research. To minimize the

potential for interference, persons with pacemakers should

• Always keep the device more than 6 inches (15.3 cm) from their pacemaker when

the device is switched on

• Not carry the device in a breast pocket

• Hold the device to the ear opposite the pacemaker

If you have any reason to suspect that interference is taking place, switch off your

device immediately.

HEARING AIDs

Some digital wireless devices may interfere with some hearing aids. If interference

occurs, consult your service provider.

■Vehicles

RF signals may affect improperly installed or inadequately shielded electronic systems

in motor vehicles such as electronic fuel injection systems, electronic antiskid (antilock)

braking systems, electronic speed control systems, air bag systems. For more

information, check with the manufacturer or its representative of your vehicle or any

equipment that has been added.

Only qualified personnel should service the device, or install the device in a vehicle.

Faulty installation or service may be dangerous and may invalidate any warranty that

may apply to the device. Check regularly that all wireless device equipment in your

vehicle is mounted and operating properly. Do not store or carry flammable liquids,

gases, or explosive materials in the same compartment as the device, its parts, or

enhancements. For vehicles equipped with an air bag, remember that an air bags inflate

with great force. Do not place objects, including installed or portable wireless

equipment in the area over the air bag or in the air bag deployment area. If in-vehicle

wireless equipment is improperly installed and the air bag inflates, serious injury could

result.

■Potentially explosive environments

Switch off your device when in any area with a potentially explosive atmosphere and

obey all signs and instructions. Potentially explosive atmospheres include areas where

you would normally be advised to turn off your vehicle engine. Sparks in such areas

could cause an explosion or fire resulting in bodily injury or even death. Switch off the

device at refuelling points such as near gas pumps at service stations. Observe

restrictions on the use of radio equipment in fuel depots, storage, and distribution areas,

chemical plants or where blasting operations are in progress. Areas with a potentially

explosive atmosphere are often but not always clearly marked. They include below deck

on boats, chemical transfer or storage facilities, vehicles using liquefied petroleum gas

(such as propane or butane), and areas where the air contains chemicals or particles

such as grain, dust or metal powders.

FCC regulations prohibit using your wireless device while in the air. The use of wireless

telephones in an aircraft may be dangerous to the operation of the aircraft, disrupt the

wireless telephone network, and may be illegal.

Failure to observe these instructions may lead to suspension or denial of telephone

services to the offender, legal action, or both.

Additional safety information

■Emergency calls

Important: Wireless phones, including this phone, operate using radio signals,

wireless networks, landline networks, and user-programmed functions.

Because of this, connections in all conditions cannot be guaranteed. You

should never rely solely on any wireless phone for essential communications

like medical emergencies.

To make an emergency call:

1. If the phone is not on, switch it on. Check for adequate signal strength.

2. Press the End key as many times as needed to clear the display and ready the phone

for calls.

3. Key in the official emergency number for your present location. Emergency numbers

vary by location.

4. Press the Send key.

If certain features are in use, you may first need to turn those features off before you

can make an emergency call. Consult this guide or your service provider. When making

an emergency call, give all the necessary information as accurately as possible. Your

wireless phone may be the only means of communication at the scene of an accident.

Do not end the call until given permission to do so.

■Certification Information (SAR)

THIS MODEL PHONE MEETS THE GOVERNMENT'S REQUIREMENTS FOR EXPOSURE TO

RADIO WAVES.

Your wireless phone is a radio transmitter and receiver. It is designed and manufactured

not to exceed the emission limits for exposure to radio frequency (RF) energy set by the

Federal Communications Commission of the U.S. Government. These limits are part of

comprehensive guidelines and establish permitted levels of RF energy for the general

population. The guidelines are based on standards that were developed by independent

scientific organizations through periodic and thorough evaluation of scientific studies.

The standards include a substantial safety margin designed to assure the safety of all

persons, regardless of age and health.

The exposure standard for wireless mobile phones employs a unit of measurement

known as the Specific Absorption Rate, or SAR. The SAR limit set by the FCC is 1.6W/kg.*

Tests for SAR are conducted using standard operating positions accepted by the FCC

with the phone transmitting at its highest certified power level in all tested frequency

bands. Although the SAR is determined at the highest certified power level, the actual

SAR level of the phone while operating can be well below the maximum value. This is

because the phone is designed to operate at multiple power levels so as to use only the

power required to reach the network. In general, the closer you are to a wireless base

station antenna, the lower the power output.

Before a phone model is available for sale to the public, it must be tested and certified

to the FCC that it does not exceed the limit established by the government-adopted

requirement for safe exposure. The tests are performed in positions and locations (for

example, at the ear and worn on the body) as required by the FCC for each model. The

highest SAR value for this model phone as reported to the FCC when tested for use at

the ear is 1.29 W/kg, and when worn on the body, as described in this user guide, is 0.70

W/kg. (Body-worn measurements differ among phone models, depending upon

available enhancements and FCC requirements).

While there may be differences between the SAR levels of various phones and at various

positions, they all meet the government requirement.

The FCC has granted an Equipment Authorization for this model phone with all reported

SAR levels evaluated as in compliance with the FCC RF exposure guidelines. SAR

information on this model phone is on file with the FCC and can be found under the

Display Grant section of http://www.fcc.gov/oet/fccid after searching on FCC ID

QMNRM-11.

For body worn operation, this phone has been tested and meets the FCC RF exposure

guidelines for use with a carry case, belt clip, or holder that contains no metal and that

positions the handset a minimum of 7/8-inch (2.2 cm) from the body. Use of other carry

cases, belt clips, or holders may not ensure compliance with FCC RF exposure guidelines.

If you do not use a body-worn enhancement and are not holding the phone at the ear,

position the handset a minimum of 7/8-inch (2.2 cm) from your body when the phone is

switched on.

*In the United States and Canada, the SAR limit for mobile phones used by the public is

1.6 watts/kilogram (W/kg) averaged over one gram of tissue. The standard incorporates

a substantial margin of safety to give additional protection for the public and to

account for any variations in measurements. SAR values may vary depending on

national reporting requirements and the network band. For SAR information in other

regions please look under product information at www.nokia.com/us.

Additional safety information

■Technical information

■Battery information

This section provides information about battery charging times with the Travel Charger

(ACP-12), the Standard Travel Charger (ACP-7), talk-times, and standby times. Be aware

that the information in this section is subject to change. For more information, contact

your service provider.

Charging times

The following charging times are approximate:

Feature Specification Feature Specification

Dimensions Width 45.1 mm

Length 107.5 mm

Depth 21.1 mm

Frequency

range (Tx)

AMPS: 824.04–

848.97

PCS: 1851.25–

1908.75 MHz

Cellular: 824.70–

848.31 MHz

Weight 90 g with BLD-3 Li-

Ion Battery

Frequency

range (Rx)

AMPS: 869.04–

893.97

PCS: 1931.25–

1988.75 MHz

Cellular: 869.70–

893.37 MHz

Wireless

networks

CDMA 800 and

1900

AMPS 800

GPS fre-

quency

1575.42 MHz

Volume 80 cu cm

Charger options ACP-12 ACP-7

BLD-3 780 mAh Li-Ion battery Up to 1.5 hours Up to 3 hours

Talk and standby times

Operation times are estimates only and depend on signal strength, phone use, network

conditions, features used, battery age and condition (including charging habits),

temperatures to which the battery is exposed, and many other factors.

■Patent information

Function Digital Analog

Talk time Up to 2.4

hours

Up to 50 minutes

Talk time with loudspeaker Up to 2.3

hours

Up to 47 minutes

Standby time Up to 10 days Up to 20 hours

Standby time with radio and headset Up to 22

hours

Up to 11 hours

Standby time with radio and loudspeaker Up to 12

hours

Up to 8 hours

D4054

54917

57582

58872

60258

60883

63778

64868

D4065

55965

57909

58872

60290

61482

64146

64961

D4141

56423

57937

58897

60470

61544

64341

65709

D4057

56994

57967

59298

60552

61670

64596

65807

D4235

57013

58024

59907

60727

62053

64630

65876

49691

57086

58218

59916

60761

62530

64661

Additional safety information

Manufactured or sold under one or more of the following US patents:

Others

■Appendix A Message from the CTIA

(Cellular Telecommunications & Internet Association)

to all users of mobile phones

Connecticut Avenue, NW Suite 800, Washington, DC 20036. Phone: (202) 785-0081

Safety is the most important call you will ever make.

A Guide to Safe and Responsible Wireless Phone Use

Tens of millions of people in the U.S. today take advantage of the unique combination of

convenience, safety and value delivered by the wireless telephone. Quite simply, the

wireless phone gives people the powerful ability to communicate by voice--almost

anywhere, anytime--with the boss, with a client, with the kids, with emergency

personnel or even with the police. Each year, Americans make billions of calls from their

wireless phones, and the numbers are rapidly growing.But an important responsibility

accompanies those benefits, one that every wireless phone user must uphold. When

driving a car, driving is your first responsibility. A wireless phone can be an invaluable

tool, but good judgment must be exercised at all times while driving a motor vehicle--

whether on the phone or not.The basic lessons are ones we all learned as teenagers.

Driving requires alertness, caution and courtesy. It requires a heavy dose of basic

common sense---keep your head up, keep your eyes on the road, check your mirrors

frequently and watch out for other drivers. It requires obeying all traffic signs and

signals and staying within the speed limit. It means using seatbelts and requiring other

passengers to do the same.But with wireless phone use, driving safely means a little

more. This brochure is a call to wireless phone users everywhere to make safety their

first priority when behind the wheel of a car. Wireless telecommunications is keeping us

54405

57373

58549

60058

60785

62924

64807

54448

57549

58598

60091

60844

63320

64801

45583

49013

50561

51015

51093

52651

RE32

580

in touch, simplifying our lives, protecting us in emergencies and providing opportunities

to help others in need. When it comes to the use of wireless phones, safety is your most

important call.

Wireless Phone "Safety Tips"Below are safety tips to follow while driving and using a

wireless phone which should be easy to remember.

1. Get to know your wireless phone and its features such as speed dial and redial.

Carefully read your instruction manual and learn to take advantage of valuable

features most phones offer, including automatic redial and memory. Also, work to

memorize the phone keypad so you can use the speed dial function without taking

your attention off the road.

2. When available, use a hands free device. A number of hands free wireless phone

accessories are readily available today. Whether you choose an installed mounted

device for your wireless phone or a speaker phone accessory, take advantage of

these devices if available to you.

3. Position your wireless phone within easy reach. Make sure you place your wireless

phone within easy reach and where you can grab it without removing your eyes

from the road. If you get an incoming call at an inconvenient time, if possible, let

your voice mail answer it for you.

4. Suspend conversations during hazardous driving conditions or situations. Let the

person you are speaking with know you are driving; if necessary, suspend the call in

heavy traffic or hazardous weather conditions. Rain, sleet, snow and ice can be

hazardous, but so is heavy traffic. As a driver, your first responsibility is to pay

attention to the road.

5. Do not take notes or look up phone numbers while driving. If you are reading an

address book or business card, or writing a "to do" list while driving a car, you are

not watching where you are going. It’s common sense. Don’t get caught in a

dangerous situation because you are reading or writing and not paying attention to

the road or nearby vehicles.

6. Dial sensibly and assess the traffic; if possible, place calls when you are not moving

or before pulling into traffic. Try to plan your calls before you begin your trip or

attempt to coincide your calls with times you may be stopped at a stop sign, red

light or otherwise stationary. But if you need to dial while driving, follow this simple

tip--dial only a few numbers, check the road and your mirrors, then continue.

7. Do not engage in stressful or emotional conversations that may be distracting.

Stressful or emotional conversations and driving do not mix--they are distracting

and even dangerous when you are behind the wheel of a car. Make people you are

Additional safety information

talking with aware you are driving and if necessary, suspend conversations which

have the potential to divert your attention from the road.

8. Use your wireless phone to call for help. Your wireless phone is one of the greatest

tools you can own to protect yourself and your family in dangerous situations--with

your phone at your side, help is only three numbers away. Dial 9-1-1 or other local

emergency number in the case of fire, traffic accident, road hazard or medical

emergency. Remember, it is a free call on your wireless phone!

9. Use your wireless phone to help others in emergencies. Your wireless phone provides

you a perfect opportunity to be a "Good Samaritan" in your community. If you see an

auto accident, crime in progress or other serious emergency where lives are in

danger, call 9-1-1 or other local emergency number, as you would want others to do

for you.

10. Call roadside assistance or a special wireless non-emergency assistance number

when necessary. Certain situations you encounter while driving may require

attention, but are not urgent enough to merit a call for emergency services. But you

still can use your wireless phone to lend a hand. If you see a broken-down vehicle

posing no serious hazard, a broken traffic signal, a minor traffic accident where no

one appears injured or a vehicle you know to be stolen, call roadside assistance or

other special non-emergency wireless number.

Careless, distracted individuals and people driving irresponsibly represent a hazard to

everyone on the road. Since 1984, the Cellular Telecommunications Industry

Association and the wireless industry have conducted educational outreach to inform

wireless phone users of their responsibilities as safe drivers and good citizens. As we

approach a new century, more and more of us will take advantage of the benefits of

wireless telephones. And, as we take to the roads, we all have a responsibility to drive

safely.The wireless industry reminds you to use your phone safely when driving.For more

information, please call 1-888-901-SAFE.

For updates: http://www.wow-com.com/consumer/issues/driving/articles.cfm?ID=85

■Appendix B Message from the FDA

(U.S. Food and Drug Administration)

to all users of mobile phones

Consumer Update on Wireless Phones

U.S. Food and Drug Administration

1. Do wireless phones pose a health hazard?

The available scientific evidence does not show that any health problems are

associated with using wireless phones. There is no proof, however, that wireless

phones are absolutely safe. Wireless phones emit low levels of radiofrequency

energy (RF) in the microwave range while being used. They also emit very low levels

of RF when in the stand-by mode. Whereas high levels of RF can produce health

effects (by heating tissue), exposure to low level RF that does not produce heating

effects causes no known adverse health effects. Many studies of low level RF

exposures have not found any biological effects. Some studies have suggested that

some biological effects may occur, but such findings have not been confirmed by

additional research. In some cases, other researchers have had difficulty in

reproducing those studies, or in determining the reasons for inconsistent results.

2. What is FDA's role concerning the safety of wireless phones?

Under the law, FDA does not review the safety of radiation-emitting consumer

products such as wireless phones before they can be sold, as it does with new drugs

or medical devices. However, the agency has authority to take action if wireless

phones are shown to emit radiofrequency energy (RF) at a level that is hazardous to

the user. In such a case, FDA could require the manufacturers of wireless phones to

notify users of the health hazard and to repair, replace or recall the phones so that

the hazard no longer exists.

Although the existing scientific data do not justify FDA regulatory actions, FDA has

urged the wireless phone industry to take a number of steps, including the

following:

• Support needed research into possible biological effects of RF of the type

emitted by wireless phones;

• Design wireless phones in a way that minimizes any RF exposure to the user that

is not necessary for device function; and

• Cooperate in providing users of wireless phones with the best possible

information on possible effects of wireless phone use on human health.

FDA belongs to an interagency working group of the federal agencies that have

responsibility for different aspects of RF safety to ensure coordinated efforts at the

federal level. The following agencies belong to this working group:

• National Institute for Occupational Safety and Health

• Environmental Protection Agency

• Federal Communications Commission

• Occupational Safety and Health Administration

• National Telecommunications and Information Administration

Additional safety information

The National Institutes of Health participates in some interagency working group

activities, as well.

FDA shares regulatory responsibilities for wireless phones with the Federal

Communications Commission (FCC). All phones that are sold in the United States

must comply with FCC safety guidelines that limit RF exposure. FCC relies on FDA

and other health agencies for safety questions about wireless phones. FCC also

regulates the base stations that the wireless phone networks rely upon. While these

base stations operate at higher power than do the wireless phones themselves, the

RF exposures that people get from these base stations are typically thousands of

times lower than those they can get from wireless phones. Base stations are thus

not the subject of the safety questions discussed in this document.

3. What kinds of phones are the subject of this update?

The term wireless phone refers here to hand-held wireless phones with built-in

antennas, often called cell mobile or PCS phones. These types of wireless phones can

expose the user to measurable radiofrequency energy (RF) because of the short

distance between the phone and the user’s head. These RF exposures are limited by

Federal Communications Commission safety guidelines that were developed with

the advice of FDA and other federal health and safety agencies. When the phone is

located at greater distances from the user, the exposure to RF is drastically lower

because a person's RF exposure decreases rapidly with increasing distance from the

source. The so-called cordless phones; which have a base unit connected to the

telephone wiring in a house, typically operate at far lower power levels, and thus

produce RF exposures far below the FCC safety limits.

4. What are the results of the research done already?

The research done thus far has produced conflicting results, and many studies have

suffered from flaws in their research methods. Animal experiments investigating the

effects of radiofrequency energy (RF) exposures characteristic of wireless phones

have yielded conflicting results that often cannot be repeated in other laboratories.

A few animal studies, however, have suggested that low levels of RF could

accelerate the development of cancer in laboratory animals. However, many of the

studies that showed increased tumor development used animals that had been

genetically engineered or treated with cancer-causing chemicals so as to be pre-

disposed to develop cancer in the absence of RF exposure. Other studies exposed the

animals to RF for up to 22 hours per day. These conditions are not similar to the

conditions under which people use wireless phones, so we don’t know with certainty

what the results of such studies mean for human health.

Three large epidemiology studies have been published since December 2000.

Between them, the studies investigated any possible association between the use of

wireless phones and primary brain cancer, glioma, meningioma, or acoustic

neuroma, tumors of the brain or salivary gland, leukemia, or other cancers. None of

the studies demonstrated the existence of any harmful health effects from wireless

phone RF exposures. However, none of the studies can answer questions about

long-term exposures, since the average period of phone use in these studies was

around three years.

5. What research is needed to decide whether RF exposure from wireless phones poses

a health risk?

A combination of laboratory studies and epidemiological studies of people actually

using wireless phones would provide some of the data that are needed. Lifetime

animal exposure studies could be completed in a few years. However, very large

numbers of animals would be needed to provide reliable proof of a cancer promoting

effect if one exists. Epidemiological studies can provide data that is directly

applicable to human populations, but 10 or more years follow-up may be needed to

provide answers about some health effects, such as cancer. This is because the

interval between the time of exposure to a cancer-causing agent and the time

tumors develop - if they do - may be many, many years. The interpretation of

epidemiological studies is hampered by difficulties in measuring actual RF exposure

during day-to-day use of wireless phones. Many factors affect this measurement,

such as the angle at which the phone is held, or which model of phone is used.

6. What is FDA doing to find out more about the possible health effects of wireless

phone RF?

FDA is working with the U.S. National Toxicology Program and with groups of

investigators around the world to ensure that high priority animal studies are

conducted to address important questions about the effects of exposure to

radiofrequency energy (RF).

FDA has been a leading participant in the World Health Organization International

Electromagnetic Fields (EMF) Project since its inception in 1996. An influential

result of this work has been the development of a detailed agenda of research needs

that has driven the establishment of new research programs around the world. The

Project has also helped develop a series of public information documents on EMF

issues.

FDA and the Cellular Telecommunications & Internet Association (CTIA) have a

formal Cooperative Research and Development Agreement (CRADA) to do research

on wireless phone safety. FDA provides the scientific oversight, obtaining input from

Additional safety information

experts in government, industry, and academic organizations. CTIA-funded research

is conducted through contracts to independent investigators. The initial research

will include both laboratory studies and studies of wireless phone users. The CRADA

will also include a broad assessment of additional research needs in the context of

the latest research developments around the world.

7. How can I find out how much radiofrequency energy exposure I can get by using my

wireless phone?

All phones sold in the United States must comply with Federal Communications

Commission (FCC) guidelines that limit radiofrequency energy (RF) exposures. FCC

established these guidelines in consultation with FDA and the other federal health

and safety agencies. The FCC limit for RF exposure from wireless telephones is set at

a Specific Absorption Rate (SAR) of 1.6 watts per kilogram (1.6 W/kg). The FCC limit

is consistent with the safety standards developed by the Institute of Electrical and

Electronic Engineering (IEEE) and the National Council on Radiation Protection and

Measurement. The exposure limit takes into consideration the body’s ability to

remove heat from the tissues that absorb energy from the wireless phone and is set

well below levels known to have effects.

Manufacturers of wireless phones must report the RF exposure level for each model

of phone to the FCC. The FCC website (http://www.fcc.gov/oet/rfsafety) gives

directions for locating the FCC identification number on your phone so you can find

your phone’s RF exposure level in the online listing.

8. What has FDA done to measure the radiofrequency energy coming from wireless

phones?

The Institute of Electrical and Electronic Engineers (IEEE) is developing a technical

standard for measuring the radiofrequency energy (RF) exposure from wireless

phones and other wireless handsets with the participation and leadership of FDA

scientists and engineers. The standard, Recommended Practice for Determining the

Spatial-Peak Specific Absorption Rate (SAR) in the Human Body Due to Wireless

Communications Devices: Experimental Techniques, sets forth the first consistent

test methodology for measuring the rate at which RF is deposited in the heads of

wireless phone users. The test method uses a tissue-simulating model of the human

head. Standardized SAR test methodology is expected to greatly improve the

consistency of measurements made at different laboratories on the same phone.

SAR is the measurement of the amount of energy absorbed in tissue, either by the

whole body or a small part of the body. It is measured in watts/kg (or milliwatts/g) of

matter. This measurement is used to determine whether a wireless phone complies

with safety guidelines.

9. What steps can I take to reduce my exposure to radiofrequency energy from my

wireless phone?

If there is a risk from these products--and at this point we do not know that there

is--it is probably very small. But if you are concerned about avoiding even potential

risks, you can take a few simple steps to minimize your exposure to radiofrequency

energy (RF). Since time is a key factor in how much exposure a person receives,

reducing the amount of time spent using a wireless phone will reduce RF exposure.

If you must conduct extended conversations by wireless phone every day, you

could place more distance between your body and the source of the RF, since the

exposure level drops off dramatically with distance. For example, you could use a

headset and carry the wireless phone away from your body or use a wireless phone

connected to a remote antenna.

Again, the scientific data do not demonstrate that wireless phones are harmful. But

if you are concerned about the RF exposure from these products, you can use

measures like those described above to reduce your RF exposure from wireless

phone use.

10. What about children using wireless phones?

The scientific evidence does not show a danger to users of wireless phones,

including children and teenagers. If you want to take steps to lower exposure to

radiofrequency energy (RF), the measures described above would apply to children

and teenagers using wireless phones. Reducing the time of wireless phone use and

increasing the distance between the user and the RF source will reduce RF

exposure.Some groups sponsored by other national governments have advised that

children be discouraged from using wireless phones at all. For example, the

government in the United Kingdom distributed leaflets containing such a

recommendation in December 2000. They noted that no evidence exists that using a

wireless phone causes brain tumors or other ill effects. Their recommendation to

limit wireless phone use by children was strictly precautionary; it was not based on

scientific evidence that any health hazard exists.

11. What about wireless phone interference with medical equipment?

Radiofrequency energy (RF) from wireless phones can interact with some electronic

devices. For this reason, FDA helped develop a detailed test method to measure

electromagnetic interference (EMI) of implanted cardiac pacemakers and

defibrillators from wireless telephones. This test method is now part of a standard

sponsored by the Association for the Advancement of Medical instrumentation

(AAMI). The final draft, a joint effort by FDA, medical device manufacturers, and

many other groups, was completed in late 2000. This standard will allow

Additional safety information

manufacturers to ensure that cardiac pacemakers and defibrillators are safe from

wireless phone EMI. FDA has tested hearing aids for interference from handheld

wireless phones and helped develop a voluntary standard sponsored by the Institute

of Electrical and Electronic Engineers (IEEE). This standard specifies test methods

and performance requirements for hearing aids and wireless phones so that no

interference occurs when a person uses a compatible phone and a accompanied

hearing aid at the same time. This standard was approved by the IEEE in 2000.FDA

continues to monitor the use of wireless phones for possible interactions with other

medical devices. Should harmful interference be found to occur, FDA will conduct

testing to assess the interference and work to resolve the problem.

12. Where can I find additional information?

For additional information, please refer to the following resources:

• FDA web page on wireless phones

http://www.fda.gov/cdrh/phones/index.html

• Federal Communications Commission (FCC) RF Safety Program

http://www.fcc.gov/oet/rfsafety

• International Commission on Non-Ionizing Radiation Protection

http://www.icnirp.de

• World Health Organization (WHO) International EMF Project

http://www.who.int/emf

• National Radiological Protection Board (UK)

http://www.nrpb.org.uk/

July 18, 2001For updates: http://www.fda.gov/cdrh/phones

Nokia One-Year Limited Warranty

Nokia Inc. (“Nokia”) warrants that this cellular phone (“Product”) is free from defects in

material and workmanship that result in Product failure during normal usage, according

to the following terms and conditions:

1. The limited warranty for the Product extends for ONE (1) year beginning on the date

of the purchase of the Product. This one year period is extended by each whole day

that the Product is out of your possession for repair under this warranty.

2. The limited warranty extends only to the original purchaser (“Consumer”) of the

Product and is not assignable or transferable to any subsequent purchaser/end-user.

3. The limited warranty extends only to Consumers who purchase the Product in the

United States of America.

4. During the limited warranty period, Nokia will repair, or replace, at Nokia’s sole

option, any defective parts, or any parts that will not properly operate for their

intended use with new or refurbished replacement items if such repair or

replacement is needed because of product malfunction or failure during normal

usage. No charge will be made to the Consumer for any such parts. Nokia will also

pay for the labor charges incurred by Nokia in repairing or replacing the defective

parts. The limited warranty does not cover defects in appearance, cosmetic,

decorative or structural items, including framing, and any non-operative parts.

Nokia’s limit of liability under the limited warranty shall be the actual cash value of

the Product at the time the Consumer returns the Product for repair, determined by

the price paid by the Consumer for the Product less a reasonable amount for usage.

Nokia shall not be liable for any other losses or damages. These remedies are the

Consumer’s exclusive remedies for breach of warranty.

5. Upon request from Nokia, the Consumer must prove the date of the original

purchase of the Product by a dated bill of sale or dated itemized receipt.

6. The Consumer shall bear the cost of shipping the Product to Nokia in Melbourne,

Florida. Nokia shall bear the cost of shipping the Product back to the Consumer after

the completion of service under this limited warranty.

7. The Consumer shall have no coverage or benefits under this limited warranty if any

of the following conditions are applicable:

1. The Product has been subjected to abnormal use, abnormal conditions, improper

storage, exposure to moisture or dampness, unauthorized modifications,

unauthorized connections, unauthorized repair, misuse, neglect, abuse,

accident, alteration, improper installation, or other acts which are not the fault

of Nokia, including damage caused by shipping.

Additional safety information

2. The Product has been damaged from external causes such as collision with an

object, or from fire, flooding, sand, dirt, windstorm, lightning, earthquake or

damage from exposure to weather conditions, an Act of God, or battery leakage,

theft, blown fuse, or improper use of any electrical source, damage caused by

computer or internet viruses, bugs, worms, Trojan Horses, cancelbots or damage

caused by the connection to other products not recommended for

interconnection by Nokia.

3. Nokia was not advised in writing by the Consumer of the alleged defect or

malfunction of the Product within fourteen (14) days after the expiration of the

applicable limited warranty period.

4. The Product serial number plate or the enhancement data code has been

removed, defaced or altered.

5. The defect or damage was caused by the defective function of the cellular

system or by inadequate signal reception by the external antenna, or viruses or

other software problems introduced into the Product.

8. Nokia does not warrant uninterrupted or error-free operation of the Product. If a

problem develops during the limited warranty period, the Consumer shall take the

following step-by-step procedure:

1. The Consumer shall return the Product to the place of purchase for repair or

replacement processing.

2. If “a” is not convenient because of distance (more than 50 miles) or for other

good cause, the Consumer shall ship the Product prepaid and insured to:

Nokia Inc., Attn: Repair Department

795 West Nasa Blvd.

Melbourne, FL 32901

3. The Consumer shall include a return address, daytime phone number and/or fax

number, complete description of the problem, proof of purchase and service

agreement (if applicable). Expenses related to removing the Product from an

installation are not covered under this limited warranty.

4. The Consumer will be billed for any parts or labor charges not covered by this

limited warranty. The Consumer will be responsible for any expenses related to

reinstallation of the Product.

5. Nokia will repair the Product under the limited warranty within 30 days after

receipt of the Product. If Nokia cannot perform repairs covered under this

limited warranty within 30 days, or after a reasonable number of attempts to

repair the same defect, Nokia at its option, will provide a replacement Product or

refund the purchase price of the Product less a reasonable amount for usage. In

some states the Consumer may have the right to a loaner if the repair of the

Product takes more than ten (10) days. Please contact the Customer Service

Center at Nokia at the telephone number listed at the end of this warranty if you

need a loaner and the repair of the Product has taken or is estimated to take

more than ten (10) days.

6. If the Product is returned during the limited warranty period, but the problem

with the Product is not covered under the terms and conditions of this limited

warranty, the Consumer will be notified and given an estimate of the charges

the Consumer must pay to have the Product repaired, with all shipping charges

billed to the Consumer. If the estimate is refused, the Product will be returned

freight collect. If the Product is returned after the expiration of the limited

warranty period, Nokia’s normal service policies shall apply and the Consumer

will be responsible for all shipping charges.

9. You (the Consumer) understand that the product may consist of refurbished

equipment that contains used components, some of which have been reprocessed.

The used components comply with Product performance and reliability

specifications.

10. ANY IMPLIED WARRANTY OF MERCHANTABILITY, OR FITNESS FOR A PARTICULAR

PURPOSE OR USE, SHALL BE LIMITED TO THE DURATION OF THE FOREGOING

LIMITED WRITTEN WARRANTY. OTHERWISE, THE FOREGOING LIMITED WARRANTY

IS THE CONSUMER’S SOLE AND EXCLUSIVE REMEDY AND IS IN LIEU OF ALL OTHER

WARRANTIES, EXPRESS OR IMPLIED. NOKIA SHALL NOT BE LIABLE FOR SPECIAL,

INCIDENTAL, PUNITIVE OR CONSEQUENTIAL DAMAGES, INCLUDING BUT NOT

LIMITED TO LOSS OF ANTICIPATED BENEFITS OR PROFITS, LOSS OF SAVINGS OR

REVENUE, LOSS OF DATA, PUNITIVE DAMAGES, LOSS OF USE OF THE PRODUCT OR

ANY ASSOCIATED EQUIPMENT, COST OF CAPITAL, COST OF ANY SUBSTITUTE

EQUIPMENT OR FACILITIES, DOWNTIME, THE CLAIMS OF ANY THIRD PARTIES,

INCLUDING CUSTOMERS, AND INJURY TO PROPERTY, RESULTING FROM THE

PURCHASE OR USE OF THE PRODUCT OR ARISING FROM BREACH OF THE

WARRANTY, BREACH OF CONTRACT, NEGLIGENCE, STRICT TORT, OR ANY OTHER

LEGAL OR EQUITABLE THEORY, EVEN IF NOKIA KNEW OF THE LIKELIHOOD OF SUCH

DAMAGES. NOKIA SHALL NOT BE LIABLE FOR DELAY IN RENDERING SERVICE UNDER

THE LIMITED WARRANTY, OR LOSS OF USE DURING THE PERIOD THAT THE PRODUCT

IS BEING REPAIRED.

11. Some states do not allow limitation of how long an implied warranty lasts, so the

one year warranty limitation may not apply to you (the Consumer). Some states do

not allow the exclusion or limitation of incidental and consequential damages, so

certain of the above limitations or exclusions may not apply to you (the Consumer).

Additional safety information

This limited warranty gives the Consumer specific legal rights and the Consumer

may also have other rights which vary from state to state.

12. Nokia neither assumes nor authorizes any authorized service center or any other

person or entity to assume for it any other obligation or liability beyond that which

is expressly provided for in this limited warranty including the provider or seller of

any extended warranty or service agreement.

13. This is the entire warranty between Nokia and the Consumer, and supersedes all

prior and contemporaneous agreements or understandings, oral or written, relating

to the Product, and no representation, promise or condition not contained herein

shall modify these terms.

14. This limited warranty allocates the risk of failure of the Product between the

Consumer and Nokia. The allocation is recognized by

the Consumer and is reflected in the purchase price.

15. Any action or lawsuit for breach of warranty must be commenced within eighteen

(18) months following purchase of the Product.

16. Questions concerning this limited warranty may be directed to:

Nokia Inc.

Attn: Customer Service

7725 Woodland Center Blvd., Ste. 150

Tampa, FL 33614

Telephone: 1-888-NOKIA-2U (1-888-665-4228)

Facsimile: (813) 287-6612

TTY/TDD Users Only: 1-800-24-NOKIA (1-800-246-6542)

17. The limited warranty period for Nokia supplied attachments and accessories is

specifically defined within their own warranty cards and packaging.

Microsoft RM-11 Tri-Mode Dual-Band Analog/ PCS Phone (AMPS/CDMA) User Manual 3205 ENv1 sgml

Microsoft Mobile Oy Tri-Mode Dual-Band Analog/ PCS Phone (AMPS/CDMA) 3205 ENv1 sgml

Users Manual

Navigation menu

Namespaces

Views

Navigation