Microsoft RM-112 GSM 900/1800/1900 Cellular Telephone w/ BT User Manual R1114 en

Microsoft Mobile Oy GSM 900/1800/1900 Cellular Telephone w/ BT R1114 en

Manual

FCC DRAFTNokia N71 User Guide9237522FCC DraftR1114_en.book Page 1 Tuesday, January 24, 2006 2:04 PM
FCC DRAFTDECLARATION OF CONFORMITY We, NOKIA CORPORATION declare under our sole responsibility that the product RM-112 is in conformity with the provisions of the following Council Directive: 1999/5/EC. A copy of the Declaration of Conformity can be found at http://www.nokia.com/phones/declaration_of_conformity/The crossed-out wheeled bin means that within the European Union the product must be taken to separate collection at the product end-of-life. This applies to your device but also to any enhancements marked with this symbol. Do not dispose of these products as unsorted municipal waste.Copyright © 2006 Nokia. All rights reserved.Reproduction, transfer, distribution or storage of part or all of the contents in this document in any form without the prior written permission of Nokia is prohibited.Nokia, Nokia Connecting People, Pop-Port, and Visual Radio are trademarks or registered trademarks of Nokia Corporation. Other product and company names mentioned herein may be trademarks or tradenames of their respective owners.Nokia tune is a sound mark of Nokia Corporation.This product includes software licensed from Symbian Software Ltd (c) 1998-200(6). Symbian and Symbian OS are trademarks of Symbian Ltd.Java™ and all Java-based marks are trademarks or registered trademarks of Sun Microsystems, Inc. Stac ®, LZS ®, ©1996, Stac, Inc., ©1994-1996 Microsoft Corporation. Includes one or more U.S. Patents: No. 4701745, 5016009, 5126739, 5146221, and 5414425. Other patents pending.Hi/fn ®, LZS ®,©1988-98, Hi/fn. Includes one or more U.S. Patents: No. 4701745, 5016009, 5126739, 5146221, and 5414425. Other patents pending.Part of the software in this product is © Copyright ANT Ltd. 1998. All rights reserved.US Patent No 5818437 and other pending patents. T9 text input software Copyright (C) 1997-2006. Tegic Communications, Inc. All rights reserved.This product is licensed under the MPEG-4 Visual Patent Portfolio License (i) for personal and noncommercial use in connection with information which has been encoded in compliance with the MPEG-4 Visual Standard by a consumer engaged in a personal and noncommercial activity and (ii) for use in connection with MPEG-4 video provided by a licensed video provider. No license is granted or shall be implied for any other use. Additional information including that relating to promotional, internal and commercial uses may be obtained from MPEG LA, LLC. See <http://www.mpegla.com>.Nokia operates a policy of ongoing development. Nokia reserves the right to make changes and improvements to any of the products described in this document without prior notice.Under no circumstances shall Nokia be responsible for any loss of data or income or any special, incidental, consequential or indirect damages howsoever caused.The contents of this document are provided ‘as is’. Except as required by applicable law, no warranties of any kind, either express or implied, including, but not limited to, the implied warranties of merchantability and fitness for a particular purpose, are made in relation to the accuracy, reliability or contents of this document. Nokia reserves the right to revise this document or withdraw it at any time without prior notice.The availability of particular products may vary by region. Please check with the Nokia dealer nearest to you.This device may contain commodities, technology or software subject to export laws and regulations from the US and other countries. Diversion contrary to law is prohibited.FCC / INDUSTRY CANADA NOTICEYour device may cause TV or radio interference (for example, when using a telephone in close proximity to receiving equipment). The FCC or Industry Canada can require you to stop using your telephone if such interference cannot be eliminated. If you require assistance, contact your local service facility. This device complies with part 15 of the FCC rules. Operation is subject to the condition that this device does not cause harmful interference.ISSUE 1 EN, 9237522R1114_en.book Page 2 Tuesday, January 24, 2006 2:04 PM
FCC DRAFTContents3ContentsFor your safety...........................................6Your Nokia N71.........................................9Settings .................................................................................... 9Transfer content.....................................................................9Essential indicators.............................................................10Keypad lock (keyguard)......................................................11Volume and loudspeaker control ....................................11Clock........................................................................................11Memory card tool................................................................12File manager .........................................................................13Useful shortcuts...................................................................14Multimedia key ....................................................................15Help .........................................................................................15Tutorial ...................................................................................15Camera..................................................... 16Camera display.....................................................................16Take pictures.........................................................................16Edit images............................................................................20Tips on taking good photographs ...................................20Video recorder display........................................................21Record videos........................................................................21Gallery.......................................................25View images and video clips............................................26Edit video clips.....................................................................26Slide show.............................................................................28Presentations........................................................................28Albums ...................................................................................29Image print ...........................................................................29Media applications ..................................31RealPlayer..............................................................................31Movie director......................................................................33Messaging.................................................35Write text..............................................................................36Write and send messages .................................................37Inbox—receive messages...................................................39Mailbox ..................................................................................41View messages on a SIM card.........................................43Messaging settings.............................................................43Make calls ................................................48Voice calls .............................................................................48Answer or reject a call.......................................................50R1114_en.book Page 3 Tuesday, January 24, 2006 2:04 PM
FCC DRAFTContents4Log........................................................................................... 51Contacts (phonebook).............................54Save names and numbers................................................. 54Copy contacts ...................................................................... 55Add ringing tones for contacts....................................... 56Create contact groups....................................................... 56Services.....................................................57Services access point ......................................................... 57Bookmarks view................................................................... 57Connection security ...........................................................58Browse.................................................................................... 58Download and purchase items........................................ 59End a connection ................................................................ 59Services settings.................................................................. 60Calendar....................................................61Create calendar entries ..................................................... 61Meeting requests ................................................................ 61Calendar views.....................................................................62Manage your calendar entries ........................................ 62Calendar settings ................................................................ 62My own.....................................................63Music player ......................................................................... 63Visual Radio (network service)........................................ 64Instant messaging (network service)............................. 66Games..................................................................................... 69Connectivity .............................................70Bluetooth connectivity...................................................... 70Infrared connection............................................................73Data cable .............................................................................74PC connections ....................................................................74Connection manager..........................................................74Synchronization................................................................... 75Device manager...................................................................75Office........................................................77Calculator.............................................................................. 77Converter............................................................................... 77Notes ...................................................................................... 77Recorder................................................................................. 78Personalize your device...........................79Profiles—set tones...............................................................79Change the look of your device ...................................... 80Active standby mode.......................................................... 81Tools..........................................................82Settings Wizard ..................................................................82Settings.................................................................................. 83Voice commands ................................................................. 92R1114_en.book Page 4 Tuesday, January 24, 2006 2:04 PM
FCC DRAFTContents5Application manager ..........................................................93Activation keys.....................................................................95Troubleshooting ...................................... 96Q&A.........................................................................................96Battery information................................ 99Charging and discharging.................................................99Nokia battery authentication guidelines......................99Care and maintenance ......................... 101Additional safety information............. 102R1114_en.book Page 5 Tuesday, January 24, 2006 2:04 PM
6FCC DRAFTFor your safetyRead these simple guidelines. Not following them may be dangerous or illegal. Read the complete user guide for further information.SWITCH ON SAFELY Do not switch the device on when wireless phone use is prohibited or when it may cause interference or danger.ROAD SAFETY COMES FIRST Obey all local laws. Always keep your hands free to operate the vehicle while driving. Your first consideration while driving should be road safety.INTERFERENCE All wireless devices may be susceptible to interference, which could affect performance.SWITCH OFF IN HOSPITALS Follow any restrictions. Switch the device off near medical equipment.SWITCH OFF IN AIRCRAFT Follow any restrictions. Wireless devices can cause interference in aircraft.SWITCH OFF WHEN REFUELLING Do not use the device at a refuelling point. Do not use near fuel or chemicals.SWITCH OFF NEAR BLASTING Follow any restrictions. Do not use the device where blasting is in progress.USE SENSIBLY Use only in the normal position as explained in the product documentation. Do not touch the antenna unnecessarily.QUALIFIED SERVICE Only qualified personnel may install or repair this product.ENHANCEMENTS AND BATTERIES Use only approved enhancements and batteries. Do not connect incompatible products.WATER-RESISTANCE Your device is not water-resistant. Keep it dry.BACK-UP COPIES Remember to make back-up copies or keep a written record of all important information stored in your device.R1114_en.book Page 6 Tuesday, January 24, 2006 2:04 PM
7FCC DRAFTCONNECTING TO OTHER DEVICES When connecting to any other device, read its user guide for detailed safety instructions. Do not connect incompatible products.EMERGENCY CALLS Ensure the phone function of the device is switched on and in service. The keypad is active only in the fold open mode. Press as many times as needed to clear the display and return to the start screen. Enter the emergency number, then press . Give your location. Do not end the call until given permission to do so.About your deviceThe wireless device described in this guide is approved for use on the EGSM 900,1800, and 1900 networks. Contact your service provider for more information about networks.When using the features in this device, obey all laws and respect privacy and legitimate rights of others. When taking and using images or video clips, obey all laws and respect local customs as well as privacy and legitimate rights of others. Warning: To use any features in this device, other than the alarm clock, the device must be switched on. Do not switch the device on when wireless device use may cause interference or danger.Network servicesTo use the phone you must have service from a wireless service provider. Many of the features in this device depend on features in the wireless network to function. These network services may not be available on all networks or you may have to make specific arrangements with your service provider before you can utilize network services. Your service provider may need to give you additional instructions for their use and explain what charges will apply. Some networks may have limitations that affect how you can use network services. For instance, some networks may not support all language-dependent characters and services. Network features are designated in this guide by (network service).Your service provider may have requested that certain features be disabled or not activated in your device. If so, they will not appear on your device menu. Your device may also have been specially configured. This configuration may include changes in menu names, menu order and icons. Contact your service provider for more information.This device supports WAP 2.0 protocols (HTTP and SSL) that run on TCP/IP protocols. Some features of this device, such as MMS, browsing, e-mail and content downloading R1114_en.book Page 7 Tuesday, January 24, 2006 2:04 PM
8FCC DRAFTusing the browser or over MMS, require network support for these technologies.For availability and information on using SIM card services, contact your SIM card vendor. This may be the service provider, network operator, or other vendor.Enhancements, batteries, and chargersAlways switch the device off and disconnect the charger before removing the battery.Check the model number of any charger before use with this device. This device is intended for use when supplied with power from a DC-4, AC-3 and AC-4 charger, and from an AC-1, ACP-7, ACP-8, ACP-9, ACP-12, LCH-8, LCH-9, or LCH-12 charger when used with the charger adapter CA-44 delivered with your device.The battery intended for use with this device is BL-5C. Warning: Use only batteries, chargers, and enhancements approved by Nokia for use with this particular model. The use of any other types may invalidate any approval or warranty, and may be dangerous.For availability of approved enhancements, please check with your dealer. When you disconnect the power cord of any enhancement, grasp and pull the plug, not the cord.R1114_en.book Page 8 Tuesday, January 24, 2006 2:04 PM
Your Nokia N719FCC DRAFTYour Nokia N71Model number: Nokia N71Hereinafter referred to as Nokia N71.SettingsYour Nokia N71 normally has MMS, GPRS, streaming, and mobile Internet settings automatically configured, based upon your service provider or network operator information. You may have settings from your service providers already installed in your device, or you may receive the settings from the service providers as a special text message.Transfer contentYou can copy content such as contacts and calendar entries from a compatible Nokia device to your Nokia N71 using Bluetooth connectivity or infrared. The type of content that can be copied depends on the device model.Copyright protections may prevent some images, music (including ringing tones), and other content from being copied, modified, transferred or forwarded.You can insert your SIM card in the other device. When Nokia N71 is switched on without a SIM card, the offline profile is automatically activated.To avoid duplicate entries, you can transfer the same type of information (for example, contacts) from the other device to your Nokia N71 only once.Transfer content1Press , and select Tools > Transfer > Copy data on your Nokia N71.2In the information view, select Continue.3Select whether you want to use Bluetooth connectivity or infrared to transfer the data. Both devices must support the selected connection type.4If you select Bluetooth connectivity to search for devices, select Continue. The visibility of the other device must be on. Select your other device from the list. You are asked to enter a code on your Nokia N71. Enter a code (1–16 digits), and select OK. Enter the same code on the other device, and select OK. The devices are now paired. See ‘Pair devices’, p. 72.For some device models, the Transfer application is sent to the other device as a message. To install Transfer on the other device, open the message, and follow the instructions on the display.R1114_en.book Page 9 Tuesday, January 24, 2006 2:04 PM
Your Nokia N7110FCC DRAFTIf you select infrared, connect the two devices. See ‘Infrared connection’, p. 73.5From your Nokia N71, select the content you want to copy from the other device.Content is copied from the memory and compatible memory card (if inserted) of the other device to the corresponding location in your Nokia N71 and compatible memory card (if inserted). Copying time depends on the amount of data to be transferred. You can cancel copying and continue later.Essential indicators The device is being used in a GSM network. You have one or more unread messages in the Inbox folder in Messaging. You have received new e-mail in the remote mailbox. There are messages waiting to be sent in the Outbox folder. You have missed calls. Shown if Ringing type is set to Silent and Message alert tone, IM alert tone, and E-mail alert tone are set to Off. The device keypad is locked. A clock alarm is active. The second phone line is being used (network service). All calls to the device are diverted to another number. If you have two phone lines (network service), the indicator for the first line is and for the second . A headset is connected to the device. The connection to a headset with Bluetooth connectivity has been lost. A loopset is connected to the device. A TTY is connected to the device. A data call is active. A GPRS or EDGE packet data connection is available. A GPRS or EDGE packet data connection is active. A GPRS or EDGE packet data connection is on hold. Bluetooth connectivity is on. Data is being transmitted using Bluetooth connectivity. A USB connection is active. An infrared connection is active. If the indicator is blinking, the device is trying to connect to the other device or the connection has been lost.R1114_en.book Page 10 Tuesday, January 24, 2006 2:04 PM
Your Nokia N7111FCC DRAFTKeypad lock (keyguard)Use the keypad lock to prevent the keys from being accidentally pressed.To lock, in standby mode, press , then . When the keys are locked, is shown on the display.To unlock in fold open mode, press , then .To lock the keypad, in fold open mode press the power key, and select Lock keypad.To lock the keypad, in fold closed mode press the power key twice to select Lock keypad, and press the cover key.When the keypad lock is on, calls may be possible to the official emergency number programmed into your device.To turn on the display light when the keypad lock is on, press the power key.Volume and loudspeaker controlTo increase or decrease the volume level when you have an active call or are listening to a sound, press or .The built-in loudspeaker allows you to speak and listen from a short distance without having to hold the device to your ear. Warning: Do not hold the device near your ear when the loudspeaker is in use, because the volume may be extremely loud. To use the loudspeaker during a call, select Options > Activate loudsp..To turn off the loudspeaker, select Options > Activate handset.Clock Tip! To view the time and date in fold closed mode, press and hold the cover key.Press , and select Clock. To set a new alarm, select Options > Set alarm. When an alarm is active, is shown.To turn off the alarm, select Stop, or to stop the alarm for 5 minutes, select Snooze.If the alarm time is reached while the device is switched off, the device switches itself on and starts sounding the alarm tone. If you select Stop, the device asks whether you want to activate the device for calls. Select No to switch off the device or Yes to make and receive calls. Do not select Yes when wireless phone use may cause interference or danger.R1114_en.book Page 11 Tuesday, January 24, 2006 2:04 PM
Your Nokia N7112FCC DRAFTTo cancel an alarm, select Clock > Options > Remove alarm.Clock settingsTo change the clock settings, select Clock > Options > Settings.To change the time or date, select Time or Date.To change the clock shown in the standby mode, select Clock type > Analog or Digital.To allow the mobile phone network to update the time, date, and time zone information to your device (network service), select Auto time update > On.To change the alarm tone, select Clock alarm tone.World clockTo open the world clock view, open Clock, and press . In the world clock view, you can view the time in different cities.To add cities to the list, select Options > Add city. You can add a maximum of 15 cities to the list.To set your current city, scroll to a city, and select Options > My current city. The city is displayed in the clock main view, and the time in your device is changed according to the city selected. Check that the time is correct and matches your time zone.Memory card toolPress , and select Tools > Memory. You can use a compatible memory card as extra storage space and for backing up the information in the device memory.To back up information from the device memory to a memory card, select Options > Backup phone mem.To restore information from the memory card to the device memory, select Options > Restore from card.Format a memory cardWhen a memory card is reformatted, all data on the card is permanently lost.Some memory cards are supplied preformatted and others require formatting. Consult your retailer to find out if you must format the memory card before you can use it.To format a memory card, select Options > Format mem. card. Select Yes to confirm.R1114_en.book Page 12 Tuesday, January 24, 2006 2:04 PM
Your Nokia N7113FCC DRAFTEject the memory card1Before you eject the card, press the power key, and select Remove mem. card. All applications are closed.2When Remove memory card and press 'OK' is displayed, open the door of the memory card slot.3Press and release the memory card to eject it from the slot.4Remove the memory card, close the door, and select OK. Important: Do not remove the memory card in the middle of an operation when the card is being accessed. Removing the card in the middle of an operation may damage the memory card as well as the device, and data stored on the card may be corrupted.File managerMany features of the device, such as contacts, messages, images, videos, ringing tones, calendar notes, documents, and downloaded applications, use memory to store data. The free memory available depends on how much data is already saved in the device memory.You can use a compatible memory card as extra storage space. Memory cards are rewritable, so you can delete old information and save new data on a memory card.To browse files and folders in the device memory or on a memory card (if inserted), press , and select Tools > File mgr.. The device memory view ( ) opens. Press to open the memory card view ( ) (if available).To move or copy files to a folder, press and at the same time to mark a file, and select Options > Move to folder or Copy to folder.To find a file, select Options > Find and the memory from which to search, and enter a search text that matches the file name.View memory consumption To view what types of data you have in the device and how much memory the different data types consume, select Options > Memory details. The amount of available free memory is shown in Free memory.Memory low—free memoryThe device notifies you if the device or the memory card memory is low.R1114_en.book Page 13 Tuesday, January 24, 2006 2:04 PM
Your Nokia N7114FCC DRAFTTo free device memory, transfer data to a compatible memory card, if you have one. Mark files to be moved, and select Move to folder > Memory card and a folder.You can also transfer media files to a compatible PC, for example, using the transfer option in Gallery. See ‘Gallery’, p. 25. Tip! You can use Nokia Phone Browser available in Nokia PC Suite to view the different memories in your device and transfer data.To remove data to free memory, use File mgr., or go to the respective application. For example, you can remove the following:• Messages from Inbox, Drafts, and Sent folders in Messaging• Retrieved e-mail messages from the device memory• Saved Web pages• Saved images, videos, or sound files• Contact information•Calendar notes• Downloaded applications. See also ‘Application manager’, p. 93.• Any other data that you no longer needUseful shortcutsUse shortcuts to quickly get the most from your device. Refer to the relevant sections in this user guide for further details of the functions.Standby mode• To switch between applications that are open, press and hold , and select an application. If memory is low, the device may close some applications. The device saves any unsaved data before closing an application.Leaving applications running in the background increases the demand on battery power and reduces the battery life.• To start the camera, press .• To call your voice mailbox (network service), press and hold .• To open multimedia applications, press or press and hold . See ‘Multimedia key’, p. 15.• To change the profile, press , and select a profile.• If you have two phone lines (network service), press to switch between the two lines.• To open the last dialed numbers list, press .• To use voice commands, press and hold .• To start a connection to Services, press and hold . See ‘Services’, p. 57.For further shortcuts available in the standby mode, see ‘Active standby mode’, p. 81.R1114_en.book Page 14 Tuesday, January 24, 2006 2:04 PM
Your Nokia N7115FCC DRAFTEdit text and lists• To mark an item in a list, scroll to it, and press and at the same time.• To mark multiple items in a list, press and hold while you press or . To end the selection, release or , then release .• To select letters and words, press and hold . At the same time, press or to highlight text.• To copy the text to clipboard, while still holding , select Copy.• To insert the text into a document, press and hold , and select Paste.Multimedia keyTo open the shortcut assigned to the multimedia key, press and hold . To open a list of multimedia applications, press . To open the desired application, press , , or . To exit the list without selecting an application, press .To change the shortcuts, press , and press . To change the applications that are shown when you press , select Top, Left, Middle, and Right and the application.Some shortcuts may be fixed, and you are not able to change them.HelpYour device has context-sensitive help. When an application is open, select Options > Help to access help for the current view.When you are reading the instructions, to switch between help and the application that is open in the background, press and hold .To open help from the main menu, select Tools > Help. Select the desired application to view its help topics.TutorialThe tutorial gives you information about some of the features of your device. To access the tutorial in the menu, press , and select My own > Tutorial and the section you want to view.R1114_en.book Page 15 Tuesday, January 24, 2006 2:04 PM
Camera16FCC DRAFTCameraYour Nokia N71 has To activate the camera, open the cover, press , and select Camera. In the viewfinder, you can see the view to be captured.The images and video clips are automatically saved in the Gallery. The camera produce .jpg images. Video clips are recorded in the 3gpp file format with the .3gp file extension or in the .mp4 file format (high video quality mode). See ‘Video settings’, p. 23.You can send images in a multimedia message as an e-mail attachment, or by using Bluetooth connectivity. Tip! You can insert an image into a contact card. See ‘Save names and numbers’, p. 54.Your Nokia N71 supports an image capture resolution of up to 1600x1200 pixels using the camera. The image resolution in these materials may appear different.Camera displayCamera indicators show the following:• The device memory ( ) and memory card ( ) indicators (1) show where images are saved.• The images indicator (2) estimates how many images, depending on the selected image quality, can fit in the remaining memory of your device or the memory card.• The shooting mode indicator (3) shows the active shooting mode. See ‘Shooting mode’, p. 17.•The flash indicator (4) shows if the flash is set to Automatic (), On (), or Off ().• The self-timer indicator (5) shows that theself-timer is activated. See ‘You in the picture—self-timer’, p. 19.• The sequence mode indicator (6) shows that the sequence mode is active. See ‘Take time-lapse pictures’, p. 18.Take picturesIf the camera is in video mode, open the image mode by selecting Options > Image mode.Graphic: Screenshot to show position of the indicators (to be numbered).R1114_en.book Page 16 Tuesday, January 24, 2006 2:04 PM
Camera17FCC DRAFTTo zoom in and out, press or . The zoom indicator, which is displayed on the side of the viewfinder, shows the zoom level. The quality (resolution) of a zoomed picture is lower than that of a nonzoomed picture.To take a picture, press . Do not move the device before the image is saved. The image is saved automatically in the Images & Video folder of Gallery. See ‘Gallery’, p. 25.Saving the captured image may take longer if you change the zoom, lighting, or color settings.To select the shooting mode; flash, colour and lighting settings; or view the Last image before taking a picture, see ‘Camera setup’, p. 17.After the image is taken, do any of the following: • If you do not want to keep the image, select Options > Delete, or press .• To send the image Via multimedia, Via e-mail, or Via Bluetooth, select Options > Send. For more information, see ‘Messaging’, p. 35 and ‘Bluetooth connectivity’, p. 70. This option is not available during an active call.• To edit the picture, select Options > Edit. See ‘Edit images’, p. 20.• To print the picture, select Options > Print. See ‘Image print’, p. 29.The camera goes into battery saving mode if you do not make any key presses for a while. To continue taking pictures, press Camera setupIf the viewfinder is active, press or , or select Options > Open setup.Press or to choose the item to be viewed or adjusted, and press . The settings available depend on which camera is in use.To reactivate the viewfinder, press Cancel or .The settings return to the default settings when you close the Camera.Shooting modeThe settings of each shooting mode have been set to match a certain style or environment. Graphic: Screenshot to indicate the setup (lower) part of the screen being active.R1114_en.book Page 17 Tuesday, January 24, 2006 2:04 PM
Camera18FCC DRAFTThe following shooting modes are available: Automatic, User defined, Portrait, Landscape, Night, and Sports.Scroll to the appropriate shooting mode for taking a picture, and press .When taking pictures, the default shooting mode is Automatic.To make your own shooting mode suitable for a certain environment, select User defined scene. In the user defined scene you can adjust Based on mode, Flash, White balance, and Colour tone, and Reset user scene options. To copy the settings of another scene, select Based on mode and the desired scene.If you select the User defined shooting mode, it is set as the default shooting mode.FlashThe camera has an LED flashlight for low light conditions.Keep a safe distance when using the flash. Do not use the flash on people or animals at close range. Do not cover the flash while taking a picture.The following flash modes are available: Automatic, On, and Off.Scroll to the desired flash setting and press .If the flash is set to Off or Automatic during bright conditions, the flash still emits a low light when an image is captured. This allows the subject of the picture to see when the picture is taken. There is no flash effect on the resultant picture.White balanceSelect the appropriate setting that matches the current lighting conditions. This allows the camera to reproduce colors more accurately.Scroll to the desired setting and press .Colour toneScroll to the desired color effect setting and press .Last imageTo view the last image taken, press .Take time-lapse picturesSelect Options > Advance sequence to set the camera to take several pictures in a sequence automatically. You can set the rate between two frames per second (fast) and one Graphic: Screenshot to show landscape scene?? See Gromit.R1114_en.book Page 18 Tuesday, January 24, 2006 2:04 PM
Camera19FCC DRAFTframe every 15 minutes (slow). The number of pictures is limited by the amount of memory available. The pictures are automatically saved in Gallery. You can also use the sequence mode with the Self-timer. See ‘You in the picture—self-timer’, p. 19. After taking the pictures, they are shown in a grid on the main display. To view a picture, press to open it.To return to the sequence mode viewfinder, select Back.You in the picture—self-timerUse the self-timer to delay the taking of a picture so that you can include yourself in the picture. To set the self-timer delay, select Options > Self-timer > 10 seconds, 20 seconds or 30 seconds. To activate the self-timer, select Activate. The self-timer indicator ( ) blinks and the device beeps when the timer is running. The camera takes the picture after the selected delay has elapsed. You can also use the Self-timer in the sequence mode. See ‘Take time-lapse pictures’, p. 18.Camera settingsTo change the main camera settings, select Options > Settings, and from the following:Image quality—High 2M - Print (1600x1200 resolution), Med 0.8M - Email (800x600 resolution) or Low 0.3M - Multimedia (640x480 resolution). The better the image quality, the more memory the image uses.Add to album—Select whether you want to save the image to a certain album in Gallery. If you select Yes, a list of available albums opens.Extended zoom—Select On if you want to achieve maximum zoom but are prepared to accept a reduction in image resolution, which may be lower than you have selected with the Image quality setting. If you want to limit the zoom range and have less reduction in resolution, select Off.Show captured image—Select On to see the captured image after it is taken, or Off to continue taking pictures immediately.Capture tone—Select the tone you want to hear when you take a picture.Memory in use—Select where to store your images.Graphic: Screenshot to show a grid of pictures in Gallery.R1114_en.book Page 19 Tuesday, January 24, 2006 2:04 PM
Camera20FCC DRAFTEdit imagesTo edit the picture you have just taken, select Options > Edit. To edit other pictures, select them from Gallery.Select Options > Apply effect to crop and rotate the image; adjust the color, compression, and resolution; also, to add effects, text, clip art, or a frame to the picture.To manually crop an image, select Options > Apply effect > Crop > Manual. A rectangle indicating the crop area is displayed. Scroll to define the top left starting point for the crop, and select Set. Scroll to the bottom right of the area to be cropped, and select Crop.To reduce redness of the eyes in an image, select Options > Apply effect > Red eye reduction. Move the cross onto the eye, and press . A loop appears on the display. Scroll to resize the loop to fit the size of the eye. Press to reduce the redness.To add clip art to an image, select Options > Apply effect > Clip art. Select the item you want to add from the list, and press . To move, rotate, and change the size of the item, select Options > Move, Resize, or Rotate.To add text to an image, select Options > Apply effect > Text. Enter the text, and select OK. To edit the text, select Options > Move, Resize, Rotate, or Colour. Shortcuts in the image editor:• To view an image in full screen, press . To return to the normal view, press again.• To rotate an image clockwise or counterclockwise, press. and .• To zoom in or zoom out, press and .Tips on taking good photographsPicture qualityUse the appropriate picture quality. The camera has three picture quality settings. Use High 2M - Print for large prints up to 25x20 centimeters (10x8 inches), Med 0.8M - Email for e-mail and prints up to 15x10 centimeters (6x4 inches), or Low 0.3M - Multimedia for use in a multimedia message. The better the image quality, the more memory the image consumes. The quality of a zoomed picture is lower than that of a nonzoomed picture. To change the picture quality, select Options > Settings..BackgroundUse a simple background—For portraits and other pictures with people, avoid having your subject in front of a cluttered, complex background that may distract attention from the subject. Move the camera or the subject when these conditions cannot be met. Move the camera closer to the object to take clearer portraits.R1114_en.book Page 20 Tuesday, January 24, 2006 2:04 PM
Camera21FCC DRAFTDepthWhen taking pictures of landscapes, add depth to your pictures by placing objects in the foreground. However, if the foreground object is too close to the camera, it may be blurred.Lighting conditionsChanging the source, amount, and direction of light can change photographs dramatically. Here are some typical lighting conditions:• Light source behind the subject—Avoid placing your subject in front of a strong light source. If the light source is behind the subject or visible in the display, the resulting picture may have weak contrast, may be too dark, and may contain unwanted lighting effects. You can use the flash to add more lighting to shadows. See ‘Flash’, p. 18.• Sidelit subject—Strong side light gives a dramatic effect but may be too harsh, resulting in too much contrast. • Light source in front of the subject—Harsh sunlight may cause the subjects to squint their eyes. The contrast may also be too high.• Optimal lighting—Found in situations where there is plenty of diffused, soft light available; for example, on a bright, partially cloudy day or on a sunny day in the shadow of trees.Video recorder displayVideo recorder indicators show the following:. • The device memory ( ) and memory card ( ) indicators (1) show where the video is saved.• The current video length indicator (2) shows elapsed time and time remaining.• The shooting mode indicator (3) shows the current shooting mode. See ‘Shooting mode’, p. 17.• The microphone indicator (4) shows that the microphone is muted.• The file format indicator (5) indicates the format of the video clip.Record videosIf the camera is in image mode, to select video mode, select Options > Video mode. R1114_en.book Page 21 Tuesday, January 24, 2006 2:04 PM
Camera22FCC DRAFTThe zoom indicator, which appears on the side pane, shows the zoom level. Press or to zoom in or zoom out.1Press to start recording. The record icon is shown. The LED flash is lit, and a tone sounds, indicating to the subject that video is being recorded. There is no flash effect on the resultant video.2To pause recording at any time, select Pause. The pause icon blinks on the display. Video recording automatically stops if recording is set to pause and there are no key presses within a minute.3Select Continue to resume recording. 4Select Stop to stop recording. The video clip is automatically saved to the Images&Video folder of Gallery. See ‘Gallery’, p. 16.To select the shooting mode; colour and lighting settings; or view the Last video clip before recording a video, see ‘Video recorder setup’, p. 22.After a video clip is recorded, do the following:• To immediately play the video clip you just recorded, select Options > Play.• If you do not want to keep the video, select Options > Delete.• To return to the viewfinder to record a new video, press .• To send the video Via multimedia, Via e-mail, or Via Bluetooth, select Options > Send. For more information, see ‘Messaging’, p. 35 and ‘Bluetooth connectivity’, p. 70. This option is not available during an active call.• To edit the video, select Options > Edit. See also ‘Edit video clips’, p. 26.Video recorder setupIf the viewfinder is active, press or , or select Options > Open setup.Press or to choose the item to be viewed or adjusted, and press . The settings available depend on which camera is in use.To reactivate the viewfinder, press Cancel or .The settings return to the default settings when you close the Camera.Shooting modeThe settings of each shooting mode have been set to match a certain style or environment. Graphic: Screenshot to indicate the setup (lower) part of the screen being active.R1114_en.book Page 22 Tuesday, January 24, 2006 2:04 PM
Camera23FCC DRAFTThe following shooting modes are available: Automatic, or Night.Scroll to the appropriate shooting mode for recording a video, and press .White balanceSelect the appropriate setting that matches the current lighting conditions. This allows the camera to reproduce colors more accurately.Scroll to the desired setting and press .Color toneScroll to the desired color effect setting and press .Last videoTo view the last video taken, press .Video settingsThere are two kinds of settings for the video recorder: video setup settings and main settings. To adjust video setup settings, see ‘White balance’, p. 18. The setup settings return to the default settings after you close the camera, but the main settings remain the same until you change them again. To change the main settings, select Options > Settings and from the following:Audio recording—Select On if you want to record both image and sound.Video quality—Set the quality of the video clip to High, Normal. If you select High or Normal, the length of the video recording is restricted by the available space on your memory card, and up to one hour per clip. If you want to view the video on a compatible TV or PC, select High video quality, which has CIF resolution (352x288) and file format .mp4. You cannot send video clips saved in the .mp4 format in a multimedia message. If you want to view the clip in compatible mobile devices, select Normal, which has QCIF resolution (176x144) and file format .3gp. To send the video clip through MMS. The video clip is limited to 300 KB (approximately 20 seconds in duration) so that it can be conveniently sent as a multimedia message to a compatible device. Some networks, however, may only support sending of multimedia messages with a maximum size of 100 KB. Contact your service provider for more information.Add to album—Select Yes to save the recorded video clip to a particular album in Gallery.Show captured video—Select Off to record a video clip immediately after another. Your videos are not played Graphic: Screenshot to show landscape scene?? See Gromit.R1114_en.book Page 23 Tuesday, January 24, 2006 2:04 PM
Camera24FCC DRAFTafter being recorded, and the video recorder is ready for use again.Default video name—Select Date or Text as the default name for videos you record.Memory in use—Choose the default memory store: device memory or memory card.R1114_en.book Page 24 Tuesday, January 24, 2006 2:04 PM
Gallery25FCC DRAFTGalleryTo store and organize your images, video clips, sound clips, playlists, and streaming links, press , and select Gallery. To open the gallery from the Camera application, select Options > Go to Gallery. From Camera, only the Images & video folder is available. Tip! To switch from Gallery to Camera, select Options > Go to Camera from the Images & video folder.Select Images & video, Tracks, Sound clips, Links, Presentations, or All files, and press .You can browse and open folders, mark, copy, and move items to folders and albums. Real audio clips, video clips, .ram files, and streaming links are opened and played in the RealPlayer application. See ‘RealPlayer’, p. 31. You can also create albums; and mark, copy, and add items to albums. See ‘Albums’, p. 29. Tip! You can transfer images from your device to a compatible PC with Nokia Phone Browser available in Nokia PC Suite. See the CD-ROM supplied with your device.Press to open a file. Videos and Real audio clips open in RealPlayer, and music opens in the music player. See ‘View images and video clips’, p. 26. See ‘Music player’, p. 63.To copy or move files to a compatible memory card or to device memory select a file and Options > Organise > Copy to memory card, Move to memory card, Copy to phone mem., or Move to phone mem.. Files stored on the memory card are indicated with .Files stored in the device memory are indicated with .To reduce the size of files that you have already copied to other locations (for example, a compatible PC) and increase free memory space, in the Images & video folder, select a file and Options > Free memory.To download files into Gallery in one of the main folders using the browser, select Graphic downls., Video downlds., Track downlds., or Sound downlds.. The browser opens, and you can select a bookmark from which the site can download.R1114_en.book Page 25 Tuesday, January 24, 2006 2:04 PM
Gallery26FCC DRAFTView images and video clipsPictures taken and video clips recorded with the camera are stored in the Images & video folder in Gallery. Images and video clips can also be sent to you in a multimedia message, as an e-mail attachment, or using Bluetooth connectivity. To be able to view a received image or video clip in Gallery or in RealPlayer, you must save it in the device memory or on a compatible memory card.Open the Images & video folder in Gallery. The images and video clip files are in a loop and ordered by date. To browse individual files, press or . To browse files in groups, press or .To edit a photo or a video clip, select Options > Edit. An image editor or a video editor opens.To add an image or a video clip to an album in Gallery, select Options > Albums. > Add to album. See ‘Albums’, p. 29.To create custom video clips, select a video clip or several clips in Gallery, and select Options > Edit. See ‘Edit video clips’, p. 26.To print your images on a compatible printer connected to your device or to store them on a compatible memory card for printing, select Options > Print. See ‘Image print’, p. 29.To zoom an opened image, select Options > Zoom in or Zoom out. The zooming ratio is at the top of the display. The zooming ratio is not stored permanently.Edit video clipsYou can edit video clips in Gallery. See ‘Gallery’, p.25.To edit video clips and create custom video clips, scroll to a video clip, and select Options > Edit. You can create custom video clips by combining and trimming video clips, and adding images, sound clips, transitions, and effects. Transitions are visual effects that you can add to the beginning and end of the video or between the video clips.In the video editor you can see two timelines: video clip timeline and sound clip timeline. If you add images, text, or transitions to a video clip, they are shown on the video clip timeline. To move on the timelines, press or . To switch between the timelines, press or .To create custom video clips, mark and select one or more video clips, and select Options > Edit.In the edit video view, you can insert video clips to make a custom video clip, and edit the clips by trimming and adding effects. You can add images and sound clips and change their duration, and also add text and images to the clip.To modify the video, select from the following options:R1114_en.book Page 26 Tuesday, January 24, 2006 2:04 PM
Gallery27FCC DRAFTEdit video clip:Cut—Trims the video clip in the cut video clip view.Add colour effect—Inserts a color effect in the video clip.Use slow motion—Slows the speed of the video clip.Mute audio or Unmute audio—Mutes or unmutes the original video clip sound.Move—Moves the video clip to the selected location on the timeline.Remove—Removes the video clip from the video.Duplicate—Makes a copy of the selected video clip.Edit text (shown only if you have added text)—To move, remove, or duplicate text; change the color and style of the text; define how long it stays on the screen; and add effects to the text.Edit image (shown only if you have added an image)—To move, remove, or duplicate an image; define how long it stays on the screen; and set a background or a color effect to the image.Edit audio clip:Cut—Trims the sound clip in the cut sound clip view.Move—Moves the sound clip to the selected location on the timeline.Remove—Removes the sound clip from the video.Duplicate—Makes a copy of the selected sound clip.Change duration—Changes the length of the sound clip.Edit transition—There are three types of transitions: at the start of a video, at the end of a video, and transitions between video clips. A start transition can be selected when the first transition of the video is active.Insert:Video clip—Inserts the selected video clip. A thumbnail of the video clip is shown in the main view. A thumbnail consists of the first non-black frame of the video clip. The name and length of the selected video clip is also shown.Image—Inserts the selected image. A thumbnail of the image is shown in the main view.Text—Inserts text to the video clip. You can insert a title, subtitle, or credits.Audio clip—Inserts the selected sound clip. The name and length of the selected sound clip is shown in the main view.New audio clip—Records a new sound clip to the selected location.R1114_en.book Page 27 Tuesday, January 24, 2006 2:04 PM
Gallery28FCC DRAFTMovie—To preview the movie in full screen or as a thumbnail, save or send the movie, or cut the movie to a suitable size for sending it in a multimedia message. Tip! To take a snapshot of a video clip, select Options > Take snapshot in the thumbnail preview view or in the cut video view.To save your video, select Options > Movie > Save. To define the Memory in use, select Options > Settings. The default is the device memory. Tip! In the Settings view, you can define Default video name, Default snapshot name, Save quality, and Memory in use.Select Send > Via multimedia, Via e-mail, Via Bluetooth, or Via infrared if you want to send the video. Contact your service provider for details of the maximum multimedia message size that you can send. If your video is too large to be sent in a multimedia message, is displayed. Tip! If you want to send a video clip that is over the maximum multimedia message size allowed by your service provider, you can send the clip using Bluetooth connectivity. See ‘Send data’, p. 72. You can also transfer your videos using Bluetooth connectivity to a compatible PC, or by using a compatible memory card reader (enhancement).Slide showTo view images and video clips in the full screen mode, select Options > Slide show > Start. Select from the following:Play—to open the RealPlayer applicationPause—to pause the slide showContinue—to resume the slide showEnd—to close the slide showPress (faster) or (slower) to adjust the Tempo. Press (previous) or (next) to browse the thumbnails.To add sound to the slide show in the Images & Video folder, select Options > Slide show > Music settings and from the following:Music—Select On, or OffTrack—Select a music file from the listVolume—Press to decrease the volume or to increase the volumePresentationsWith presentations, you can view SVG (scaleable vector graphic) files. SVG images maintain their appearance when printed or viewed with different screen sizes and R1114_en.book Page 28 Tuesday, January 24, 2006 2:04 PM
Gallery29FCC DRAFTresolutions. To view SVG files, select Presentations folder, an image, and select Options > Play. AlbumsWith albums you can conveniently manage your images and video clips. To view the albums list, in the Images & video folder, select Options > Albums > View albums. The albums are ordered alphabetically. To view the content of an album, press .To create a new album, select Options > New album. Enter a name for the album, and select OK.To add a picture or a video clip to an album in Gallery, scroll to a picture or video clip, and select Options > Albums. > Add to album. A list of albums opens. Select the album to which you want to add the picture or video clip, and press .To remove a file from an album, press . The file is not deleted from the Images & video folder in Gallery.Image printTo print your images using a compatible data cable, Bluetooth connectivity, or your compatible memory card (if available), select the image you want to print, and the print option in Gallery, Camera, image editor, or image viewer.You can only print images that are in jpg format. The pictures taken with the camera are automatically saved in .jpg format. Note: Connect the data cable to a PictBridge compatible printer, and select Pictbridge from the popup display on your device before you print.Printer selectionWhen you print for the first time, a list of available printers is displayed after you select the image. Select a printer. The printer is set as the default printer.If you have connected a PictBridge compatible printer using the CA-53 cable, the printer is automatically displayed.If the default printer is not available, a list of available printing devices is displayed.To change the default printer, select Options > Settings > Default printer.Print previewThe print preview view opens only when you start printing an image in the gallery.R1114_en.book Page 29 Tuesday, January 24, 2006 2:04 PM
Gallery30FCC DRAFTThe selected images are displayed using predefined layouts. To change the layout, scroll left and right through the available layouts for the selected printer. If the images do not fit on a single page, press or to display the additional pages.Print settingsThe available options vary, depending on the capabilities of the printing device you selected.To set a default printer, select Options > Default printer.To select the paper size, select Paper size, the size of paper from the list, and OK. Select Cancel to return to the previous view.R1114_en.book Page 30 Tuesday, January 24, 2006 2:04 PM
Media applications31FCC DRAFTMedia applicationsRealPlayerPress , and select Imaging > RealPlayer. With RealPlayer, you can play video clips, sound clips, and playlists, or stream media files over the air. You can activate a streaming link when you browse Web pages, or store it in the device memory or a compatible memory card (if inserted).RealPlayer supports files with extensions such as .3gp, .mp4 or .rm. However, RealPlayer does not necessarily support all file formats or all the variations of file formats. For example, RealPlayer attempts to open all .mp4 files, but some .mp4 files may include content that is not compliant with 3GPP standards and, therefore, is not supported by your device. Play video or sound clips1To play a media file stored in device memory, or on a compatible memory card (if inserted), select Options > Open and from the following:Most recent clips—to play one of the last six files played in RealPlayer.Saved clip—to play a file saved in Gallery.See ‘Gallery’, p. 25.2Scroll to a file, and press to play the file. Tip! To view a video clip in full screen mode, press . Press again to change back to normal screen mode.Shortcuts during play:• To fast forward, press and hold .• To rewind through the media file, press and hold .• To mute the sound, press and hold until is displayed. To turn on the sound, press and hold until you see .Stream content over the airMany service providers require you to use an Internet access point (IAP) for your default access point. Other service providers allow you to use a WAP access point.The access points may be configured when you first start your device.Contact your service provider for more information. Note: In RealPlayer, you can only open an rtsp:// URL address. However, RealPlayer recognizes an http link to a .ram file.R1114_en.book Page 31 Tuesday, January 24, 2006 2:04 PM
Media applications32FCC DRAFTTo stream content over the air, select a streaming link saved in Gallery, on a Web page, or received in a text message or multimedia message. Before live content begins streaming, your device connects to the site and starts loading the content. The content is not saved in your device.Receive RealPlayer settingsYou may receive RealPlayer settings in a special text message from the network operator or service provider. See ‘Data and settings’, p. 40. For more information, contact your network operator or service provider.Change the RealPlayer settingsSelect Options > Settings and from the following:Video—to adjust the contrast of the video, and to have RealPlayer automatically repeat video clips after they finish playingConnection—to select whether to use a proxy server, change the default access point, and set the port range used when connecting. Contact your service provider for the correct settings.Proxy settings:Use proxy—To use a proxy server, select YesProxy serv. address—Enter the IP address of the proxy serverProxy port number—Enter the port number of the proxy serverGlossary: Proxy servers are intermediate servers between media servers and their users. Some service providers use them to provide additional security or speed up access to browser pages that contain sound or video clips. Network settings:Default access point—Scroll to the access point you want to use to connect to the Internet, and press Online time—Set the time for RealPlayer to disconnect from the network when you pause a media clip playing through a network link. Select User defined, and press . Enter the time, and select OK.Lowest UDP port—Enter the lowest port number of the server’s port range. The minimum value is 1024.Highest UDP port—Enter the highest port number of the server’s port range. The maximum value is 65535.Select Options > Advanced settings to edit the bandwidth values for different networks.R1114_en.book Page 32 Tuesday, January 24, 2006 2:04 PM
Media applications33FCC DRAFTMovie directorTo create muvees, press , and select Imaging > Movie. Muvees are short, edited video clips that can contain video, images, music, and text. Quick muvee is created automatically by Movie director after you select the style for the muvee. Movie director uses the default music and text associated with the chosen style. In a Custom muvee you can select your own video and music clips, images and style, and add an opening and closing message. You can send muvees with MMS.Open Movie, and press or to move between the and views. To return to the main view from the view, select Done.The view contains a list of video clips that you can Play, Send, Rename, and Delete.Create a quick muvee1In the Movie director main view, select Quick muvee.2Select a style for the muvee from the style list. The created muvee is saved in the Movie director muvee list. The muvee is played automatically after saving.Create a custom muvee1In the Movie Director main view, select Custom muvee.2Select the clips you want to include in your muvee in Video, Image, Style, or Music.After you select video clips and images, to define the order in which the files are played in the muvee, select Options > Advanced options. To select the file you want to move, press . Then scroll to the file below which you want to place the marked file, and press .To cut the video clips, select Options > Select contents. See ‘Select content’, p. 34.In Message you can add an opening and closing text to a muvee.3Select Create muvee and from the following:Multimedia message—to optimize the length of the muvee for MMS sendingAuto-select—to include all the selected pictures and video clips in the muveeSame as music—to set the muvee duration to be the same as the chosen music clipUser defined—to define the length of the muvee4Select Options > Save.To preview the custom muvee before saving it, in the Preview muvee view, select Options > Play.R1114_en.book Page 33 Tuesday, January 24, 2006 2:04 PM
Media applications34FCC DRAFTTo create a new custom muvee by using the same style settings, select Options > Recreate.Select contentTo edit the selected video clips, select Options > Advanced options > Options > Select contents. You can select which parts of the video clip you want to include or exclude in the muvee. In the slider, green is for included, red is for excluded, and grey is for neutral parts.To include a part of the video clip in the muvee, scroll to the part, and select Options > Include. To exclude a part, select Options > Exclude. To exclude a shot, select Options > Exclude shot.To let Movie director randomly include or exclude a part or parts of the video clip, scroll to the part, and select Options > Mark as neutral or Mark all as neutral.SettingsSelect Settings to edit the following options:Memory in use—Select where to store your muvees.Resolution—Select the resolution of your muvees.Default muvee name—Set a default name for the muvees.R1114_en.book Page 34 Tuesday, January 24, 2006 2:04 PM
Messaging35FCC DRAFTMessagingPress , and select Messaging. In Messaging, you can create, send, receive, view, edit, and organize text messages, multimedia messages, e-mail messages, and special text messages containing data. You can also receive messages and data using Bluetooth connectivity or infrared, receive Services messages, cell broadcast messages, and send service commands.To create a new message, select New message. Note: Only devices that have compatible features can receive and display multimedia messages. The appearance of a message may vary depending on the receiving device.Messaging contains the following folders: Inbox—Received messages, except e-mail and cell broadcast messages, are stored here. E-mail messages are stored in the Mailbox. My folders—Organize your messages into folders. Tip! To avoid rewriting messages that you send often, use texts in the templates folder. Mailbox—Connect to your remote mailbox to retrieve your new e-mail messages or view your previously retrieved e-mail messages offline. See ‘E-mail’, p. 45. Drafts—Draft messages that have not been sent are stored here. Sent—The last 20 messages that have been sent, excluding messages sent using Bluetooth connectivity or infrared, are stored here. To change the number of messages to be saved, see ‘Other settings’, p. 47. Outbox—Messages waiting to be sent are temporarily stored here. Example: Messages are placed in the outbox, for example, when your device is outside network coverage. You can also schedule e-mail messages to be sent the next time you connect to your remote mailbox. Reports (network service)—You can request the network to send you a delivery report of the text messages and multimedia messages you have sent. Receiving a delivery report of a multimedia message that has been sent to an e-mail address may not be possible. Tip! When you have opened any of the default folders, to switch between the folders, press or .To enter and send service requests (also known as USSD commands), such as activation commands for network R1114_en.book Page 35 Tuesday, January 24, 2006 2:04 PM
Messaging36FCC DRAFTservices, to your service provider, select Options > Service command in the Messaging main view.Cell broadcast (network service) allows you to receive messages on various topics, such as weather or traffic conditions, from your service provider. For available topics and relevant topic numbers, contact your service provider. In the Messaging main view, select Options > Cell broadcast. In the main view, you can see the status of a topic, a topic number, name, and whether it has been flagged ( ) for follow-up.Write textABC, abc, and Abc indicate the selected character mode. 123 indicates the number mode.Traditional text input is displayed when you are writing text using traditional text input.• Press a number key ( — ) repeatedly until the desired character appears. There are more characters available for a number key than are printed on the key.• If the next letter is located on the same key as the present one, wait until the cursor appears (or press to end the time-out period), and enter the letter.• To insert a space, press . To move the cursor to the next line, press three times.Predictive text inputYou can enter any letter with a single keypress. Predictive text input is based on a built-in dictionary to which you can add new words. is displayed when you write text using predictive text input.1To activate predictive text input, press , and select Predictive text on. This activates predictive text input for all editors in the device.2To write the desired word, press the keys — . Press each key only once for one letter. For example, to write "Nokia" when the English dictionary is selected, press for N, for o, for k, for i, and for a.The word suggestion changes after each keypress.3When you finish writing the word correctly, press to confirm it, or press to add a space.If the word is not correct, press repeatedly to view the matching words the dictionary has found one by R1114_en.book Page 36 Tuesday, January 24, 2006 2:04 PM
Messaging37FCC DRAFTone, or press , and select Predictive text > Matches.If the ? character is shown after the word, the word is not in the dictionary. To add a word to the dictionary, select Spell, enter the word using traditional text input, and select OK. The word is added to the dictionary. When the dictionary is full, a new word replaces the oldest added word.4Start writing the next word.Write compound wordsWrite the first half of a compound word; to confirm it, press . Write the last part of the compound word. To complete the compound word, press to add a space.Turn predictive text input offTo turn predictive text input off for all editors in the device, press , and select Predictive text > Off. Tip! To turn predictive text input on or off, quickly press twice.Tips on text inputTo insert a number in the letter mode, press and hold the desired number key.To switch between the letter and number mode, press and hold .To switch between the different character modes, press .To delete a character, press . To delete more than one character, press and hold .To access the most common punctuation marks, press .To open a list of special characters, press . Tip! To insert several special characters at the same time, press when you select each character.Write and send messagesThe appearance of a multimedia message may vary, depending on the receiving device.Before you can create a multimedia message or write an e-mail, you must have the correct connection settings in place. See ‘Receive MMS and e-mail settings’, p. 39 and ‘E-mail’, p. 45.The wireless network may limit the size of MMS messages. If the inserted picture exceeds this limit, the device may make it smaller so that it can be sent by MMS.1Select New message and one of the following:Text message—to send a text messageMultimedia message—to send a multimedia message (MMS)R1114_en.book Page 37 Tuesday, January 24, 2006 2:04 PM
Messaging38FCC DRAFTE-mail—to send an e-mailIf you have not set up your e-mail account, you are prompted to do so. To start creating the e-mail settings with the mailbox guide, select Start.2In the To field, press to select recipients or groups from contacts, or enter the recipient’s phone number or e-mail address. To add a semicolon (;) that separates the recipients, press . You can also copy and paste the number or address from the clipboard.3In the Subject field, enter the subject of a multimedia message or e-mail. To change the fields that are visible, select Options > Address fields.4In the message field, write the message. To insert a template, select Options > Insert or Insert object > Template.5To add a media object to a multimedia message, select Options > Insert object > Image, Sound clip, or Video clip. When sound is added, is shown.You cannot send video clips that are saved in the .mp4 format in a multimedia message. To change the format in which recorded videos are saved, see ‘Video settings’, p. 23.6To take a new picture or record sound or video for a multimedia message, select Insert new > Image, Sound clip, or Video clip. To insert a new slide to the message, select Slide.To see what the multimedia message looks like, select Options > Preview.7To add an attachment to an e-mail, select Options > Insert > Image, Sound clip, Video clip, or Note. E-mail attachments are indicated by . Tip! To send other file types as attachments, open the appropriate application, and select Send > Via e-mail, if available.8To send the message, select Options > Send, or press .Your device supports the sending of text messages beyond the character limit for a single message. Longer messages are sent as a series of two or more messages. Your service provider may charge accordingly. Characters that use accents or other marks, and characters from some language options like Chinese, take up more space limiting the number of characters that can be sent in a single message. In the navigation bar, you can see the message length indicator counting backwards. For example, 10 (2) means that you can still add 10 characters for the text to be sent as two messages.R1114_en.book Page 38 Tuesday, January 24, 2006 2:04 PM
Messaging39FCC DRAFTE-mail messages are automatically placed in Outbox before sending. If sending does not succeed, the e-mail is left in the Outbox with the Failed status.Tip! You can combine images, video, sound, and text to a presentation and send it in a multimedia message. Start to create a multimedia message, and select Options > Create presentation. The option is shown only if MMS creation mode is set to Guided or Free. See ‘Multimedia messages’, p. 44.Receive MMS and e-mail settingsYou may receive the settings in a message from your network operator or service provider. See ‘Data and settings’, p. 40.Enter the MMS settings manually:1Press , select Tools > Settings > Connection > Access points, and define the settings for a multimedia messaging access point. See ‘Connection settings’, p. 86.2Press , and select Messaging > Options > Settings > Multimedia message > Access point in use and the access point you created as the preferred connection. See also ‘Multimedia messages’, p. 44.Before you can send, receive, retrieve, reply to, and forward e-mail, you must do the following:• Configure an Internet access point (IAP) correctly. See ‘Connection settings’, p. 86.• Define your e-mail settings correctly. If you select Mailbox in the Messaging main view and have not set up your e-mail account, you are prompted to do so. To start creating the e-mail settings with the mailbox guide, select Start. See also ‘E-mail’, p. 45.You must have a separate e-mail account. Follow the instructions given by your remote mailbox and Internet service provider (ISP).Inbox—receive messagesIn the Inbox folder, indicates an unread text message, an unread multimedia message, data received through infrared, and data received through Bluetooth connectivity.When you receive a message, and 1 new message are shown in the standby mode. To open the message, select Show. To open a message in Inbox, scroll to it, and press .To reply to a received message, select Options > ReplyTo print a text or a multimedia message on a compatible basic print profile (BPP) equipped printer with Bluetooth R1114_en.book Page 39 Tuesday, January 24, 2006 2:04 PM
Messaging40FCC DRAFTconnectivity (such as HP Deskjet 450 Mobile Printer or HP Photosmart 8150), select Options > Print.Multimedia messages Important: Exercise caution when opening messages. Multimedia message objects may contain malicious software or otherwise be harmful to your device or PC.You may receive a notification that a multimedia message is waiting in the multimedia message center. To start a packet data connection to retrieve the message to your device, select Options > Retrieve.When you open a multimedia message ( ), you may see an image and a message. is shown if sound is included or if video is included. To play the sound or the video, select the indicator.To see the media objects that have been included in the multimedia message, select Options > Objects.If the message includes a multimedia presentation, is displayed. To play the presentation, select the indicator.Data and settingsYour device can receive many kinds of messages that contain data ( ):Configuration message—You may receive settings from your network operator, service provider, or company information management department in a configuration message. To save the settings, select Options > Save all.Business card—To save the information to Contacts, select Options > Save business card. Certificates or sound files attached to the business card are not saved.Ringing tone—To save the ringing tone, select Options > Save.Operator logo—To have the logo shown in the standby mode instead of the network operator’s own identification, select Options > Save.Calendar entry—To save the invitation, select Options > Save to Calendar.Web message—To save the bookmark to the bookmarks list in Services, select Options > Add to bookmarks. If the message contains both access point settings and bookmarks, to save the data, select Options > Save all. E-mail notification—The note tells you how many new e-mails you have in your remote mailbox. An extended notification may list more detailed information.Service messagesService messages ( ) are notifications (for example, news headlines) and may contain a text message or a link. R1114_en.book Page 40 Tuesday, January 24, 2006 2:04 PM
Messaging41FCC DRAFTFor availability and subscription, contact your service provider.MailboxIf you select Mailbox and have not set up your e-mail account, you are prompted to do so. To start creating the e-mail settings with the mailbox guide, select Start. See also ‘E-mail’, p. 45.When you create a new mailbox, the name you give to the mailbox replaces Mailbox in the Messaging main view. You can have up to six mailboxes.Open the mailboxWhen you open the mailbox, the device asks if you want to connect to the mailbox (Connect to mailbox?).To connect to your mailbox and retrieve new e-mail headings or messages, select Yes. When you view messages online, you are continuously connected to a remote mailbox using a data connection. See also ‘Connection settings’, p. 86.To view previously retrieved e-mail messages offline, select No. When you view e-mail messages offline, your device is not connected to the remote mailbox.Retrieve e-mail messagesIf you are offline, select Options > Connect to start a connection to the remote mailbox. Important: Exercise caution when opening messages. E-mail messages may contain malicious software or otherwise be harmful to your device or PC.1When you have an open connection to a remote mailbox, select Options > Retrieve e-mail and one of the following:New—to retrieve all new e-mail messagesSelected—to retrieve only the e-mail messages that have been markedAll—to retrieve all messages from the mailboxTo stop retrieving messages, select Cancel.2After you retrieve the e-mail messages, you can continue viewing them online, or select Options > Disconnect to close the connection and view the e-mail messages offline.E-mail status indicators: The new e-mail (offline or online mode) has not been retrieved to your device. The new e-mail has been retrieved to your device. The e-mail message has been read, and it has not been retrieved to your device. The e-mail message has been read.R1114_en.book Page 41 Tuesday, January 24, 2006 2:04 PM
Messaging42FCC DRAFT The e-mail heading has been read and the message content has been deleted from the device.3To open an e-mail message, press . If the e-mail message has not been retrieved and you are offline, you are asked if you want to retrieve this message from the mailbox.To view e-mail attachments, open a message that has the attachment indicator , and select Options > Attachments. If the attachment has a dimmed indicator, it has not been retrieved to the device; select Options > Retrieve.You can also receive meeting requests in the mailbox. See ‘Meeting requests’, p. 61, and ‘Create calendar entries’, p. 61.To print an e-mail message on a compatible basic print profile (BPP) equipped printer with Bluetooth connectivity (such as HP Deskjet 450 Mobile Printer or HP Photosmart 8150), select Options > Print.Retrieve e-mail messages automaticallyTo retrieve messages automatically, select Options > E-mail settings > Automatic retrieval > Header retrieval > Always on or Only in home net., and define when and how often the messages are retrieved.Retrieving e-mail messages automatically may increase your call costs due to the data traffic.Delete e-mail messagesTo delete the contents of an e-mail message from the device while still retaining it in the remote mailbox, select Options > Delete. In Delete msg. from:, select Phone only.The device mirrors the e-mail headings in the remote mailbox. Although you delete the message content, the e-mail heading stays in your device. If you want to remove the heading as well, you must first delete the e-mail message from your remote mailbox, then make a connection from your device to the remote mailbox again to update the status.To delete an e-mail from the device and the remote mailbox, select Options > Delete. In Delete msg. from:, select Phone and server.If you are offline, the e-mail is deleted from your device. During the next connection to the remote mailbox, it is automatically deleted from the remote mailbox. If you are using the POP3 protocol, messages marked to be deleted are removed only after you have closed the connection to the remote mailbox.To cancel deleting an e-mail from the device and server, scroll to an e-mail that has been marked to be deleted during the next connection ( ), and select Options > Undelete.R1114_en.book Page 42 Tuesday, January 24, 2006 2:04 PM
Messaging43FCC DRAFTDisconnect from the mailboxWhen you are online, to end the data connection to the remote mailbox, select Options > Disconnect.View messages on a SIM cardBefore you can view SIM messages, you must copy them to a folder in your device.1In the Messaging main view, select Options > SIM messages.2Select Options > Mark/Unmark > Mark or Mark all to mark messages.3Select Options > Copy. A list of folders opens.4To start copying, select a folder and OK. To view the messages, open the folder.Messaging settingsFill in all fields marked with Must be defined or with a red asterisk. Follow the instructions given by your service provider. You may also obtain settings from your service provider in a configuration message.Some or all message centers or access points may be preset for your device by your service provider or network operator, and you may not be able to change, create, edit, or remove them.Text messagesPress , and select Messaging > Options > Settings > Text message and from the following:Message centers—View a list of all text message centers that have been defined.Character encoding— To use character conversion to another encoding system when available, select Reduced support.Msg. center in use—Select which message center is used to deliver text messages.Receive report—Select whether the network sends delivery reports on your messages (network service).Message validity—Select how long the message center resends your message if the first attempt fails (network service). If the recipient cannot be reached within the validity period, the message is deleted from the message center.Message sent as—Change this option only if you are sure that your message center is able to convert text messages into these other formats. Contact your network operator.Preferred connection—Select the connection used for sending text messages: GSM network or packet data, if supported by the network. See ‘Connection settings’, p. 86.R1114_en.book Page 43 Tuesday, January 24, 2006 2:04 PM
Messaging44FCC DRAFTReply via same ctr.—Select whether you want the reply message to be sent using the same text message center number (network service).Multimedia messagesPress , and select Messaging > Options > Settings > Multimedia message and from the following:Image size—Define the size of the image in a multimedia message: Original (shown only when the MMS creation mode is set to Guided or Free), Small, or Large.MMS creation mode —If you select Guided, the device informs you if you try to send a message that may not be supported by the recipient. Select Restricted; the device prevents you from sending messages that may not be supported.Access point in use—Select which access point is used as the preferred connection for the multimedia message center.Multimedia retrieval—Select how you want to receive multimedia messages. To receive multimedia messages automatically in your home network, select Aut. in home network. Outside your home network, you receive a notification that there is multimedia message that you can retrieve in the multimedia message center.When you are outside your home network, sending and receiving multimedia messages may cost you more.If you select Multimedia retrieval > Always automatic, your device automatically makes an active packet data connection to retrieve the message both in and outside your home network.Allow anon. messages—Select whether you want to reject messages from an anonymous sender.Receive ads—Define whether you want to receive multimedia message advertisements.Receive report—Select whether you want the status of the sent message to be shown in the log (network service). Receiving a delivery report of a multimedia message that has been sent to an e-mail address may not be possible.Deny report sending—Select whether you want to deny your device sending delivery reports of received multimedia messages.Message validity—Select how long the message center resends your message if the first attempt fails (network service). If the recipient cannot be reached within the validity period, the message is deleted from the message center.R1114_en.book Page 44 Tuesday, January 24, 2006 2:04 PM
Messaging45FCC DRAFTE-mailPress , and select Messaging > Options > Settings > E-mail and from the following:Mailboxes—Select a mailbox to change Connection settings, User settings, Retrieval settings, and Automatic retrieval.Mailbox in use— Select which mailbox you want to use for sending e-mail.To create a new mailbox, select Options > New mailbox in the mailbox main view.Connection settingsTo edit the settings for the e-mail you receive, select Incoming e-mail and from the following:User name—Enter your user name, given to you by your service provider.Password—Enter your password. If you leave this field blank, you are prompted for the password when you try to connect to your remote mailbox.Incoming mail server—Enter the IP address or host name of the mail server that receives your e-mail.Access point in use—Select an Internet access point (IAP). See ‘Connection settings’, p. 86.Mailbox name—Enter a name for the mailbox.Mailbox type—Defines the e-mail protocol that your remote mailbox service provider recommends. The options are POP3 and IMAP4. This setting can be selected only once and cannot be changed if you have saved or exited from the mailbox settings. If you use the POP3 protocol, e-mail messages are not updated automatically when you are online. To see the latest e-mail messages, you must disconnect and make a new connection to your mailbox.Security (ports)—Select the security option used to secure the connection to the remote mailbox.Port—Define a port for the connection.APOP secure login (for POP3 only)—Use with the POP3 protocol to encrypt the sending of passwords to the remote e-mail server while connecting to the mailbox.To edit the settings for the e-mail you send, select Outgoing e-mail and from the following:My e-mail address—Enter the e-mail address given to you by your service provider. Replies to your messages are sent to this address.Outgoing mail server—Enter the IP address or host name of the mail server that sends your e-mail. You may only be able to use the outgoing server of your network operator. Contact your service provider for more information.Access point in use—Select an Internet access point (IAP). See ‘Connection settings’, p. 86.R1114_en.book Page 45 Tuesday, January 24, 2006 2:04 PM
Messaging46FCC DRAFTThe settings for User name, Password, Security (ports), and Port are similar to the ones in Incoming e-mail.User settingsMy name—Enter your own name. Your name replaces your e-mail address in the recipient’s device when the recipient’s device supports this function.Send message—Define how e-mail is sent from your device. Select Immediately for the device to connect to the mailbox when you select Send message. If you select During next conn., e-mail is sent when the connection to the remote mailbox is available.Send copy to self—Select whether you want to save a copy of the e-mail to your remote mailbox and to the address defined in My e-mail address.Include signature—Select whether you want to attach a signature to your e-mail messages.New e-mail alerts—Select whether you want to receive the new e-mail indications, a tone and a note, when new mail is received to the mailbox.Default encoding—Select another encoding according to language.Retrieval settingsE-mail to retrieve—Define which parts of the e-mail are retrieved: Headers only, Partially (kB), Messages (for IMAP4 only), or Msgs. & attachs..Retrieval amount—Define how many new e-mail messages are retrieved to the mailbox.IMAP4 folder path (for IMAP4 only)—Define the folder path for folders to be subscribed.Folder subscriptions (for IMAP4 only)—Subscribe to other folders in the remote mailbox and retrieve content from those folders.Automatic retrievalE-mail notifications—Select whether you want to receive notifications when new e-mail is received in your remote mailbox.E-mail notifications and automatic header retrieval cannot be active at the same time.Header retrieval—Select whether you want the device to retrieve new e-mail automatically. You can define when, and how often, the messages are retrieved.Retrieving e-mail messages automatically may increase your call costs due to the data traffic.R1114_en.book Page 46 Tuesday, January 24, 2006 2:04 PM
Messaging47FCC DRAFTService messagesPress , and select Messaging > Options > Settings > Service message. Select whether you want to receive service messages. If you want to set the device to automatically activate the browser and start a network connection to retrieve content when you receive a service message, select Download messages > Automatically.Cell broadcastCheck the available topics and related topic numbers with your service provider. Press , and select Messaging > Options > Settings > Cell broadcast and from the following:Reception—Select whether you want to receive cell broadcast messages.Language—Select the languages in which you want to receive messages: All, Selected, or Other.Topic detection—Select whether the device automatically searches for new topic numbers, and saves the new numbers without a name to the topic list.Other settingsPress , and select Messaging > Options > Settings > Other and from the following:Save sent messages—Select whether you want to save a copy of the text messages, multimedia messages, or e-mail that you send to the Sent folder.No. of saved msgs.—Define how many sent messages are saved to the Sent folder at a time. The default limit is 20 messages. When the limit is reached, the oldest message is deleted.Memory in use—If a compatible memory card is inserted in the device, select the memory where you want to save your messages: Phone memory or Memory card.R1114_en.book Page 47 Tuesday, January 24, 2006 2:04 PM
Make calls48FCC DRAFTMake callsVoice calls Tip! To increase or decrease the volume during a call, press or . If you have set the volume to Mute, you cannot adjust the volume with the or keys. To adjust the volume, select Unmute, and press or .1In the standby mode, enter the phone number, including the area code. To remove a number, press . For international calls, press twice for the + character (replaces the international access code), and enter the country code, area code (omit the leading zero if necessary), and phone number.2Press to call the number.3Press to end the call (or to cancel the call attempt).Pressing always ends a call, even if another application is active. To end a call if the cover is open, and a compatible headset is not connected, close the cover.To make a call from Contacts, press , and select Contacts. Scroll to the desired name, or enter the first letters of the name to the search field. Matching contacts are listed. To call, press . Select the call type Voice call.You must copy the contacts from your SIM card to Contacts before you can make a call this way. See ‘Copy contacts’, p. 55.To call your voice mailbox (network service), press and hold in the standby mode. See also ‘Call diverting’, p. 91. Tip! To change the phone number of your voice mailbox, press , and select Tools > Voice mail > Options > Change number. Enter the number (obtained from your service provider), and select OK.To call a recently dialed number in the standby mode, press . Scroll to the number you want, and press to call the number.Make a conference call1Make a call to the first participant.2To make a call to another participant, select Options > New call. The first call is automatically put on hold.3When the new call is answered, to join the first participant in the conference call, select Options > Conference.R1114_en.book Page 48 Tuesday, January 24, 2006 2:04 PM
Make calls49FCC DRAFTTo add a new person to the call, select Options > New call > Options > Conference > Add to conference. Your device supports conference calls between a maximum of six participants, including yourself.To have a private conversation with one of the participants, select Options > Conference > Private. Select a participant, and select Private. The conference call is put on hold on your device. The other participants can still continue the conference call. Once you have finished the private conversation, select Options > Add to conference to return to the conference call.To drop a participant, select Options > Conference > Drop participant, scroll to the participant, and select Drop. 4To end the active conference call, press .Speed dial a phone numberTo activate speed dialing, press , and select Tools > Settings > Call > Speed dialing > On.To assign a phone number to one of the speed dialing keys ( — ), press , and select Tools > Speed dial. Scroll to the key to which you want to assign the phone number, and select Options > Assign. is reserved for the voice mailbox. To call in the standby mode, press the speed dial key and .Voice dialingYour device supports enhanced voice commands. Enhanced voice commands are not dependent on the speaker’s voice, so the user does not record voice tags in advance. Instead, the device creates a voice tag for the entries in contacts, and compares the spoken voice tag to it. The voice recognition in the device adapts to the main user’s voice to recognize the voice commands better.The voice tag for a contact is the name or nickname that is saved on the contact card. To listen to the synthesized voice tag, open a contact card, and select Options > Play voice tag.Make a call with a voice tagNote: Using voice tags may be difficult in a noisy environment or during an emergency, so you should not rely solely upon voice dialing in all circumstances.When you use voice dialing, the loudspeaker is in use. Hold the device at a short distance away when you say the voice tag.1To start voice dialing, press and hold the voice key. If you are using a compatible headset with the headset R1114_en.book Page 49 Tuesday, January 24, 2006 2:04 PM
Make calls50FCC DRAFTkey, press and hold the headset key to start voice dialing.2A short tone is played, and Speak now is displayed. Say clearly the name or nickname that is saved on the contact card.3The device plays a synthesized voice tag for the recognized contact in the selected device language, and displays the name and number. After a timeout of 1.5 seconds, the device dials the number.If the recognized contact was not correct, select Next to view a list of other matches or Quit to cancel voice dialing.If several numbers are saved under the name, the device selects the default number, if it has been set. Otherwise, the device selects the first available number of the following: Mobile, Mobile (home), Mobile (business), Telephone, Tel. (home), and Tel. (business).Answer or reject a callTo answer the call if the cover is open, press . To answer a call by opening the cover, set the If the cover is closed, open the cover, and the call will be answered automatically. See ‘Cover display settings’, p. 84.To mute the ringing tone when a call comes in, select Silence. If the cover is closed, press the cover key to select Silence. Tip! If a compatible headset is connected to the device, to answer and end a call, press the headset key.If the cover is open, and you do not want to answer a call, press or close the cover to reject it, if a compatible headset is not connected. If the cover is closed, press the cover key once to silence the ringing, and again to reject the call. The caller hears a line busy tone. If you have activated the Call divert settings > If busy function to divert calls, rejecting an incoming call also diverts the call. See ‘Call diverting’, p. 91.When you reject an incoming call, you can also send a text message to the caller informing why you cannot answer the call. Select Options > Send text message. You can edit the text before sending it. To set up this option and write a standard text message, see ‘Call settings’, p. 85.Call waiting (network service)You can answer a call while you have another call in progress if you have activated Call waiting in Tools > Settings > Call > Call waiting. Tip! To change the device tones for different environments and events (for example, when you want your device to be silent), see ‘Profiles—set tones’, p. 79.To answer the waiting call, press . The first call is put on hold.R1114_en.book Page 50 Tuesday, January 24, 2006 2:04 PM
Make calls51FCC DRAFTTo switch between the two calls, select Swap. To connect an incoming call or a call on hold with an active call and to disconnect yourself from the calls, select Options > Transfer . To end the active call, press . To end both calls, select Options > End all calls.Options during a voice callMany of the options that you can use during a voice call are network services. Select Options during a call for some of the following options: Mute or Unmute, Answer, Reject, Swap, Hold or Unhold, Activate handset, Activate loudsp., or Activate handsfree (if a compatible headset with Bluetooth connectivity is attached), End active call or End all calls, New call, Conference, and Transfer. Select from the following: Replace—To end an active call and replace it by answering the waiting call.Send DTMF—To send DTMF tone strings, for example, a password. Enter the DTMF string or search for it in Contacts. To enter a wait character (w) or a pause character (p), press repeatedly. Select OK to send the tone. Tip! You can add DTMF tones to the Phone number or DTMF fields in a contact card. Tip! If you select Activate loudsp., you can close the cover and continue the call. LogRecent calls To monitor the phone numbers of missed, received, and dialed calls, press , and select My own > Log > Recent calls. The device registers missed and received calls only if the network supports these functions, the device is switched on, and has network coverage. Tip! When you see a note in the standby mode about missed calls, select Show to access the list of missed calls. To call back, scroll to a name or number, and press .To clear all recent call lists, select Options > Clear recent calls in the recent calls main view. To clear one of the call registers, open the register you want to erase, and select Options > Clear list. To clear an individual event, open a register, scroll to the event, and press .Call duration To monitor the approximate duration of your incoming and outgoing calls, press , and select My own > Log > Call duration.R1114_en.book Page 51 Tuesday, January 24, 2006 2:04 PM
Make calls52FCC DRAFTTo set the display of the call duration while a call is active, select Connect. > Log > Options > Settings > Show call duration > Yes or No. Note: The actual time invoiced for calls by your service provider may vary, depending on network features, rounding off for billing, and so forth.To clear call duration timers, select Options > Clear timers. For this you need the lock code, see ‘Security’, p.88 and ‘Phone and SIM’, p. 88.Packet dataTo check the amount of data sent and received during packet data connections, press , and select My own > Log > Packet data. For example, you may be charged for your packet data connections by the amount of data sent and received.Monitor all communication eventsIcons in Log: Incoming Outgoing Missed communication eventsTo monitor all voice and video calls, text messages, or data connections registered by the device, press , select My own > Log, and press to open the general log. For each communication event, you can see the sender or recipient name, phone number, name of the service provider, or access point. You can filter the general log to view just one type of event and create new contact cards based on the log information. Tip! To see the duration of a voice call on the main display during an active call, select Options > Settings > Show call duration > Yes. Tip! To view a list of sent messages, press , and select Messaging > Sent.Subevents, such as a text message sent in more than one part and packet data connections, are logged as one communication event. Connections to your mailbox, multimedia messaging center, or Web pages are shown as packet data connections.To filter the log, select Options > Filter and a filter.To erase the contents of the log, recent calls register, and messaging delivery reports permanently, select Options > Clear log. Select Yes to confirm. To remove a single event from the log, press .To set the Log duration, select Options > Settings > Log duration. The log events remain in the device memory for a set number of days after which they are automatically erased to free memory. If you select No log, all the log contents, recent calls register, and messaging delivery reports are permanently deleted.R1114_en.book Page 52 Tuesday, January 24, 2006 2:04 PM
Make calls53FCC DRAFTTo view the details of a communication event, in the general log view scroll to an event, and press . Tip! In the details view, to copy a phone number to the clipboard and paste it to a text message, select Options > Copy Number.Packet data counter and connection timer: To view how much data, measured in kilobytes, is transferred and how long a certain packet data connection lasts, scroll to an incoming or outgoing event indicated by Pack., and select Options > View details.R1114_en.book Page 53 Tuesday, January 24, 2006 2:04 PM
Contacts (phonebook)54FCC DRAFTContacts (phonebook)Press , and select Contacts. In Contacts you can add a personal ringing tone or a thumbnail image to a contact card. You can also create contact groups, that allow you to send text messages or e-mail to many recipients at the same time. You can add received contact information (business cards) to contacts. See ‘Data and settings’, p. 40. Contact information can only be sent to or received from compatible devices. Save names and numbers1Select Options > New contact.2Fill in the fields that you want, and select Done.To edit contact cards in Contacts, scroll to the contact card you want to edit, and select Options > Edit. Tip! To print contact cards on a compatible basic print profile (BPP) equipped printer with Bluetooth connectivity (such as HP Deskjet 450 Mobile Printer or HP Photosmart 8150), select Options > Print.To delete a contact card in Contacts, select a card, and press . To delete several contact cards at the same time, press and to mark the contacts, and press to delete. Tip! To add and edit contact cards, use Nokia Contacts Editor available in Nokia PC Suite. To attach a small thumbnail image to a contact card, open the contact card, and select Options > Edit > Options > Add thumbnail. The thumbnail image is shown when the contact calls. Tip! Speed dialing is a quick way to call frequently used numbers. You can assign speed dialing keys to eight phone numbers. See ‘Speed dial a phone number’, p. 49. Tip! To send contact information, select the card you want to send. Select Options > Send > Via text message, Via multimedia, Via Bluetooth, or Via infrared. See ‘Messaging’, p. 35 and ‘Send data’, p. 72.To add a contact to a group, select Options > Add to group (shown only if you have created a group). See ‘Create contact groups’, p. 56.To view the amount of contacts, groups, and the available memory in Contacts, select Options > Memory details.R1114_en.book Page 54 Tuesday, January 24, 2006 2:04 PM
Contacts (phonebook)55FCC DRAFTDefault numbers and addressesYou can assign default numbers or addresses to a contact card. In this way if a contact has several numbers or addresses, you can easily call or send a message to the contact to a certain number or address. The default number is also used in voice dialing.1In the address book, select a contact, and press .2Select Options > Defaults.3Select a default to which you want to add a number or an address, and select Assign.4Select a number or an address you want to set as a default.The default number or address is underlined in the contact card.Copy contactsTo copy names and numbers from a SIM card to your device, press , and select Contacts > Options > SIM contacts > SIM directory. Select the names you want to copy and Options > Copy to Contacts.To copy contacts to your SIM card, press , and select Contacts. Select the names you want to copy and Options > Copy to SIM direct.; or select Options > Copy > To SIM directory. Only the contact card fields supported by your SIM card are copied. Tip! You can synchronize your contacts to a compatible PC with Nokia PC Suite. SIM directory and servicesFor availability and information on using SIM card services, contact your SIM card vendor. This may be the service provider, network operator, or other vendor.Press , and select Contacts > Options > SIM contacts > SIM directory to see the names and numbers stored on the SIM card. In the SIM directory you can add, edit, or copy numbers to contacts, and you can make calls.To view the list of fixed dialing numbers, select Options > SIM contacts > Fixed dialing contacts. This setting is only shown if supported by your SIM card.To restrict calls from your device to selected phone numbers, select Options > Activ. fixed dialing. To add new numbers to the fixed dialing list, select Options > New SIM contact. You need the PIN2 code for these functions.When you use Fixed dialing, packet data connections are not possible, except when sending text messages over a packet data connection. In this case, the message center number and the recipient’s phone number must be included on the fixed dialing list.R1114_en.book Page 55 Tuesday, January 24, 2006 2:04 PM
Contacts (phonebook)56FCC DRAFTWhen fixed dialing is activated, calls may be possible to the official emergency number programmed into your device.Add ringing tones for contactsWhen a contact or group member calls you, the device plays the chosen ringing tone (if the caller’s phone number is sent with the call and your device recognizes it).1Press to open a contact card or go to the groups list, and select a contact group.2Select Options > Ringing tone. A list of ringing tones opens.3Select the ringing tone you want to use for the individual contact or the selected group.To remove the ringing tone, select Default tone from the list of ringing tones.Create contact groups1In Contacts, press to open the groups list.2Select Options > New group. 3Write a name for the group or use the default name Group , and select OK. 4Open the group, and select Options > Add members.5Scroll to a contact, and press to mark it. To add multiple members at a time, repeat this action on all the contacts you want to add.6Select OK to add the contacts to the group.To rename a group, select Options > Rename, enter the new name, and select OK.Remove members from a group1In the groups list, open the group you want to modify.2Scroll to the contact, and select Options > Remove from group.3Select Yes to remove the contact from the group. Tip! To check to which groups a contact belongs, scroll to the contact, and select Options > Belongs to groups.R1114_en.book Page 56 Tuesday, January 24, 2006 2:04 PM
Services57FCC DRAFTServicesVarious service providers maintain pages specifically designed for mobile devices. These pages use the wireless markup language (WML), extensible hypertext markup language (XHTML), or hypertext markup language (HTML).Check the availability of services, pricing, and fees with your network operator or service provider. Service providers will also give you instructions on how to use their services.Press , and select Services. Shortcut: To start a connection, press and hold in the standby mode.Services access pointTo access pages, you need service settings for the page that you want to use. You may receive the settings in a special text message from the network operator or service provider that offers the Web page. See ‘Data and settings’, p. 40. For more information, contact your network operator or service provider. Tip! Settings may be available on the Web site of a network operator or service provider.Enter settings manually1Press , select Tools > Settings > Connection > Access points, and define the settings for an access point. Follow the instructions given to you by your service provider. See ‘Connection settings’, p. 86.2Press , and select Services > Options > Bookmark manager > Add bookmark. Write a name for the bookmark and the address of the page defined for the current access point.3To set the created access point as the default access point, select Options > Settings > Access point.Bookmarks viewThe bookmarks view opens when you open Services.Your device may have some bookmarks loaded for sites not affiliated with Nokia. Nokia does not warrant or endorse these sites. If you choose to access them, you should take the same precautions for security or content as you would with any Internet site. indicates the starting page defined for the default access point.R1114_en.book Page 57 Tuesday, January 24, 2006 2:04 PM
Services58FCC DRAFTConnection securityIf the security indicator is displayed during a connection, the data transmission between the device and the Internet gateway or server is encrypted.The security icon does not indicate that the data transmission between the gateway and the content server (or place where the requested resource is stored) is secure. The service provider secures the data transmission between the gateway and the content server.Select Options > Details > Security to view details about the connection, encryption status, and information about server and user authentication.Security certificates may be required for some services, such as banking services. For more information, contact your service provider. See also ‘Certif. management’, p. 90.Browse Important: Use only services that you trust and that offer adequate security and protection against harmful software.To download a page, select a bookmark, or enter the address in the field ( ).On a browser page, new links appear underlined in blue and previously visited links in purple. Images that act as links have a blue border around them.To open links and make selections, press . Shortcut: Press to jump to the end of a page, and press to jump to the beginning of a page.To go to the previous page while browsing, select Back. If Back is not available, select Options > Navigation options > History to view a chronological list of the pages you visited during a browsing session.To retrieve the latest content from the server, select Options > Navigation options > Reload.To save a bookmark, select Options > Save as bookmark. Tip! To access the bookmarks view while browsing, press and hold . To return to the browser view, select Options > Back to page.To save a page while browsing, select Options > Advanced options > Save page. You can save pages to the device memory or a compatible memory card (if inserted), and browse them when offline. To access the pages later, press in the bookmarks view to open the Saved pages view.To enter a new URL address, select Options > Navigation options > Go to web address.R1114_en.book Page 58 Tuesday, January 24, 2006 2:04 PM
Services59FCC DRAFTYou can download files that cannot be shown on the browser page, such as ringing tones, images, operator logos, themes, and video clips. To download an item, scroll to the link, and press .When you start a download, a list of ongoing, paused, and completed downloads from the current browsing session is displayed. To view the list, select Options > Tools > Downloads. In the list, scroll to an item, and select Options to pause, resume, or cancel ongoing downloads, or open, save, or delete completed downloads. Copyright protections may prevent some images, music (including ringing tones), and other content from being copied, modified, transferred or forwarded. Important: Only install and use applications and other software from sources that offer adequate security and protection against harmful software.Download and purchase itemsYou can download items such as ringing tones, images, operator logos, themes, and video clips. These items can be provided free, or you can purchase them. Downloaded items are handled by the respective applications in your device. For example, a downloaded photo can be saved in Gallery. Important: Only install and use applications and other software from sources that offer adequate security and protection against harmful software.1To download the item, scroll to the link, and press .2Select the appropriate option to purchase the item.3Carefully read all the information provided.To continue the download, select Accept. To cancel the download, select Cancel.End a connectionTo end the connection and view the browser page offline, select Options > Advanced options > Disconnect. To end the connection and close the browser, select Options > Exit.Empty the cacheThe information or services you have accessed are stored in the cache memory of the device.A cache is a memory location that is used to store data temporarily. If you have tried to access or have accessed confidential information requiring passwords, empty the cache after each use. The information or services you have accessed are stored in the cache. To empty the cache, select Options > Advanced options > Clear cache.R1114_en.book Page 59 Tuesday, January 24, 2006 2:04 PM
Services60FCC DRAFTServices settingsSelect Options > Settings and from the following:Access point—Change the default access point. See ‘Connection settings’, p. 86. Some or all access points may be preset for your device by your service provider or network operator, and you may not be able to change, create, edit, or remove them.Show images and objects—Select whether you want to load images while browsing. If you select No, to load images later during browsing, select Options > Show images.Font size—Select the text size.Default encoding—If text characters are not shown correctly, you can select another encoding according to language.Automatic bookmarks—Enable or disable automatic bookmark collecting. If you want to continue collecting automatic bookmarks but hide the folder from the bookmarks view, select Hide folder.Screen size—Select what is shown when you are browsing: Select. keys only or Full screen.Homepage—Define the home page.Search page—Define a Web page that is downloaded when you select Navigation options > Open search page in the bookmarks view, or when browsing.Volume—If you want the browser to play sounds embedded on Web pages, select a volume level.Rendering—If you want the page layout shown as accurately as possible when in Small screen mode, select By quality. If you do not want external cascading style sheets to be downloaded, select By speed.Cookies—Enable or disable the receiving and sending of cookies.Java/ECMA script—Enable or disable the use of scripts.Security warnings—Hide or show security notifications.Confirm touch tones—Select whether you want to confirm before the device sends touch tones during a voice call. See also ‘Options during a voice call’, p. 51.R1114_en.book Page 60 Tuesday, January 24, 2006 2:04 PM
Calendar61FCC DRAFTCalendarUse Calendar to remind you of meetings, anniversaries, and to keep track of your tasks and other notes.Create calendar entries Shortcut: In the day, week, or month calendar view, press any key ( — ). An appointment entry opens, and the characters you enter are added to the Subject field. In the to-do view, a to-do note entry opens.1Press , and select Calendar > Options > New entry and one of the following:Appointment—to remind you of an appointment that has a specific date and timeMeeting request—to send a meeting request by e-mail (a mailbox must be defined in the device)Memo—to write a general entry for a dayAnniversary—to remind you of birthdays or special dates (entries are repeated every year)To-do—to remind you of a task that needs doing by a specific date2Fill in the fields. To set an alarm, select Alarm > On, and enter the Alarm time and Alarm date.To add a description for an appointment or a meeting, select Options > Add description.3To save the entry, select Done.When the calendar alarms for a note, select Silence to turn off the calendar alarm tone. The reminder text stays on the screen. To end the calendar alarm, select Stop. To set the alarm to snooze, select Snooze. Tip! You can synchronize your calendar with a compatible PC using Nokia PC Suite. When creating a calendar entry, set the desired Synchronization option.Meeting requestsIf you receive a meeting request to the mailbox in your device, the request is saved to the calendar when you open the e-mail.R1114_en.book Page 61 Tuesday, January 24, 2006 2:04 PM
Calendar62FCC DRAFTYou can view received meeting requests in the mailbox or in the calendar. To respond to a meeting request using e-mail, select Options > Respond.Calendar views Tip! Select Options > Settings to change the starting day of the week or the view that is shown when you open the calendar.In the month view, dates that have calendar entries are marked with a small triangle in the right bottom corner. In the week view, memos and anniversaries are placed before 8 a.m. To switch between the month view, week view, day view, and to-do view, press .To go to a certain date, select Options > Go to date. To jump to today, press .To send a calendar note to a compatible device, select Options > Send.To print calendar entries on a compatible basic print profile (BPP) equipped printer with Bluetooth connectivity (such as HP Deskjet 450 Mobile Printer or HP Photosmart 8150), select Options > Print.Manage your calendar entriesDeleting past entries in Calendar saves space in your device memory.To delete more than one event at a time, go to the month view, and select Options > Delete entry > Before date or All entries.To mark a task as completed, scroll to it in the to-do view, and select Options > Mark as done.Calendar settingsTo modify the Calendar alarm tone, Default view, Week starts on, and Week view title, and Default mailbox , select Options > Settings.R1114_en.book Page 62 Tuesday, January 24, 2006 2:04 PM
My own63FCC DRAFTMy ownMusic playerPress , and select My own > Music plyr.. With the music player, you can play music files and create and listen to playlists. Warning: Listen to music at a moderate level. Continuous exposure to high volume may damage your hearing. Do not hold the device near your ear when the loudspeaker is in use, because the volume may be extremely loud.Add musicWhen you open the music player for the first time, the player searches the device memory for music files to create a music library.After you add or remove music files in the device, update your music library. Select Options > Music library > Options > Update Music library. Tip! You can transfer music files from your device to your compatible memory card (if inserted) with Nokia Audio Manager available in Nokia PC Suite.Play musicWhen you open the music player, the previously played track or playlist is displayed. To view the music library, select Options > Music library and the desired song list. To start playing the songs in the view, select Options > Play.When a song is playing, to change between play and pause, press and .To stop a song, press . To fast forward or rewind, press and hold or . To start playing the next or previous song, press or .To save the song list as a playlist, select Options > Add to track list, and create a new playlist, or select a saved playlist.To adjust the volume, press or .To select between random play and normal play mode, select Options > Random play. To select whether playing stops at the end of the playlist or restarts from its beginning, select Options > Loop.Icons in Music plyr.: —Repeat; —Random; — Repeat and random; and —Loudspeaker muted.R1114_en.book Page 63 Tuesday, January 24, 2006 2:04 PM
My own64FCC DRAFT Tip! To leave the application open and music playing in the background, press to return to the standby mode. To return to the application, press , and select Music plyr..To open your Web bookmarks for downloading music, select Options > Track downloads.To return to the standby mode and leave the music playing in the background, select Options > Play in background.Music libraryTo view the music library, select Options > Music library. All tracks lists all music. To view sorted songs, select Albums, Artists, Genres, or Composers. The album, artist, genre, and composer information is collected from the ID3 or M4A tags of the song files, if available.To add songs, albums, artists, genres, or composers to a playlist, select the items and Options > Add to track list. You can create a new playlist or add to an existing one.To view playlists, select Track lists. To create a new playlist, select Options > New track list. When viewing a playlist you have created yourself, to add more songs, select Options > Add tracks.To delete a playlist, press . This only deletes the playlist, not the music files.Visual Radio (network service)You can use the Visual Radio application as a traditional FM radio with automatic tuning and saved stations. If you tune to stations that offer Visual Radio service, you can view visual information on the display related to the radio program. The Visual Radio service uses packet data (network service). You can listen to the FM radio while using other applications.To use the Visual Radio service, the following conditions are required:• The device must be switched on.• The device must have a valid SIM card inserted.• The station you listen to and the network operator you use must support this service.• An Internet access point must be defined to access the operator’s visual radio server. See ‘Access points’, p. 86.• The station must have the correct Visual Radio service ID defined and Visual Radio service enabled. See ‘Saved stations’, p. 66.If you do not have access to the Visual Radio service, the operators and radio stations in your area may not support Visual Radio. The Visual Radio service may not be available in all areas and countries.R1114_en.book Page 64 Tuesday, January 24, 2006 2:04 PM
My own65FCC DRAFTThe FM radio depends on an antenna other than the wireless device antenna. A compatible headset or enhancement needs to be attached to the device for the FM radio to function properly.You can listen to the radio with the built-in loudspeaker or a compatible headset. When using the loudspeaker, keep the headset plugged in the device. The lead of the headset functions as the antenna of the radio, so let it hang freely. Warning: Listen to music at a moderate level. Continuous exposure to high volume may damage your hearing. Do not hold the device near your ear when the loudspeaker is in use, because the volume may be extremely loud.You can make a call or answer an incoming call while listening to the radio. The radio is turned off when there is an active call. When the call is finished, turn the radio back on manually.The radio selects the used frequency band based on the country information received from the network.Visual Radio can be used for listening when the device cover is closed. Channel information may be displayed on the cover display. To mute or unmute the radio, press the cover key.Listen to the radioNote that the quality of the radio broadcast depends on the coverage of the radio station in that particular area.Connect a compatible headset to the device. The lead of the headset functions as the radio antenna, so let it hang freely. Press , and select My own > Radio.To start a station search, select or . Searching stops when a station is found. To change the frequency manually, select Options > Manual tuning.If you have previously saved radio stations, select or to go to the next or previous saved station. To select the memory location of a station press the corresponding number key.To adjust the volume, press or . To listen to the radio using the loudspeaker, select Options > Activate loudsp.. To view available stations based on location, select Options > Station directory (network service).To save the current tuned station to your station list, select Options > Save station. To open the list of your Add graphic and iconsin text to show the on-screen buttonsR1114_en.book Page 65 Tuesday, January 24, 2006 2:04 PM
My own66FCC DRAFTsaved stations, select Options > Stations. See ‘Saved stations’, p. 66.To return to the standby mode and leave the FM radio playing in the background, select Options > Play in background.View visual contentTo check availability and costs, and to subscribe to the service, contact your network operator or service provider.To view available visual content for a tuned station, select or Options > Station > Start visual service. If the visual service ID has not been saved for the station, enter it, or select Retrieve to search for it in the station directory (network service).When the connection to the visual service is established, the display shows the current visual content designed by the content provider.To adjust display settings for the visual content view, select Options > Display settings > Lighting or Screen saver timeout.Saved stationsYou can save up to 20 radio stations in Visual Radio. To open your station list, select Options > Stations.To listen to a saved station, select Options > Station > Listen. To view available visual content for a station with Visual Radio service, select Options > Station > Start visual service.To change station details, select Options > Station > Edit.SettingsSelect Options > Settings and from the following:Start-up tone—To select a tone to play when the application is started.Auto-start service—To have the Visual Radio service start automatically when you select a saved station that offers visual service, select Yes.Access point—To select the access point used for the data connection. You do not need an access point to use the application as an ordinary FM radio.Instant messaging (network service)Press , and select My own > IM.Instant messaging (IM) allows you to converse with other people using instant messages and join discussion forums (IM groups) with specific topics. Various service providers maintain IM servers that you can log in to after you R1114_en.book Page 66 Tuesday, January 24, 2006 2:04 PM
My own67FCC DRAFTregister to an IM service. Service providers may differ in their support of features.Select Conversations to start or continue a conversation with an IM user; IM contacts to create, edit, or view the online status of your IM contacts; IM groups to start or continue a group conversation with multiple IM users; or Recorded chats to view a previous IM session that you saved.Check the availability of services, pricing, instructions, and fees with your network operator or service provider.Receive IM settingsYou must save the settings to access the service that you want to use. You may receive the settings in a special text message from the network operator or service provider that offers the IM service. See ‘Data and settings’, p. 40. You can also enter the settings manually. See ‘Chat server settings’, p. 69.Connect to an IM server1To connect to the IM server in use, open IM, and select Options > Login. To change the IM server in use and save new IM servers, see ‘Chat server settings’, p. 69.2Enter your user ID and password, and press to log in. You obtain the user ID and password for the IM server from your service provider.3To log out, select Options > Logout.Modify your IM settingsSelect Options > Settings > IM settings and from the following:Use screen name (shown only if IM groups are supported by the server)—To enter a nickname, select Yes.IM presence—To allow others to see if you are online, select Active for all.Allow messages from—To allow messages from all, select All.Allow invitations from—To allow invitations only from your IM contacts, select IM contacts only. IM invitations are sent by IM contacts who want you to join their groups.Msg. scrolling speed—To select the speed at which new messages are displayed.Sort IM contacts—To select how your IM contacts are sorted: Alphabetically or By online status.Availability reloading—To select how to update information about whether your IM contacts are online or offline, select Automatic or Manual.Offline contacts—To select whether IM contacts with an offline status are shown in the IM contacts list.R1114_en.book Page 67 Tuesday, January 24, 2006 2:04 PM
My own68FCC DRAFTSearch for IM groups and usersTo search for groups, in the IM groups view, select Options > Search. You can search by Group name, Topic, and Members (user ID).To search for users, in the IM contacts view, select Options > New IM contact > Search from server. You can search by User's name, User ID, Phone number, and E-mail address.Join IM groupsThe IM groups view shows a list of the IM groups that you have saved or are currently joined to.To join a saved IM group, press .To join an IM group that is not on the list, but for which you know the group ID, select Options > Join new group.To leave the IM group, select Options > Leave IM group.ChatAfter you join an IM group, you can view the messages that are exchanged there, and send your own messages.To send a message, write the message in the message editor field, and press .To send a private message to a participant, select Options > Send private msg..To reply to a private message sent to you, select the message and Options > Reply.To invite IM contacts who are online to join the IM group, select Options > Send invitation.To prevent receiving messages from certain participants, select Options > Blocking options and the desired option.Record chatsTo record the messages that are exchanged during a conversation or while you are joined in a IM group, select Options > Record chat. To stop recording, select Options > Stop recording. To view the recorded chats, in the main view, select Recorded chats.View and start conversationsThe Conversations view shows a list of the individual conversation participants that you have an ongoing conversation with. Ongoing conversations are automatically closed when you exit IM.To view a conversation, scroll to a participant, and press .To continue the conversation, write your message, and press .R1114_en.book Page 68 Tuesday, January 24, 2006 2:04 PM
My own69FCC DRAFTTo return to the conversations list without closing the conversation, select Back. To close the conversation, select Options > End conversation.To start a new conversation, select Options > New conversation.To save a conversation participant to your IM contacts, select Options > Add to IM contacts.To send automatic replies to incoming messages, select Options > Set auto reply on. You can still receive messages.IM contactsIn the IM contacts view, you can retrieve chat contact lists from the server, or add a new chat contact to a contact list. When you log in to the server, the previously used chat contact list is retrieved from the server automatically.Chat server settingsSelect Options > Settings > Server settings. You may receive the settings in a special text message from the network operator or service provider that offers the chat service. You obtain the user ID and password from your service provider when you register to the service. If you do not know your user ID or password, contact your service provider.Servers—View a list of all defined IM servers.Default server—Change the IM server to which you want to connect.IM login type—To log in automatically when you start IM, select On app. start-up.To add a new server to your list of IM servers, select Servers > Options > New server. Enter the following settings:Server name—the name for the chat serverAccess point in use—the access point you want to use for the serverWeb address—the URL address of the IM serverUser ID—your user IDPassword—your login passwordGamesPress , and select My own and a game. For instructions on how to play the game, select Options > Help.R1114_en.book Page 69 Tuesday, January 24, 2006 2:04 PM
Connectivity70FCC DRAFTConnectivityBluetooth connectivityYou can connect wirelessly to other compatible devices with wireless Bluetooth technology. Compatible devices may include mobile phones, computers, and enhancements such as headsets and car kits. You can use Bluetooth connectivity to send images, video clips, music and sound clips, and notes; connect wirelessly to your compatible PC (for example, to transfer files); and connect to a compatible printer to print images with Image print. See ‘Image print’, p. 29.Since devices with Bluetooth technology communicate using radio waves, your device and the other device do not need to be in direct line-of-sight. The two devices only need to be within 10 meters (33 feet) of each other, but the connection may be subject to interference from obstructions such as walls or from other electronic devices.This device is compliant with Bluetooth Specification 1.2 that supports the following profiles: basic printing, generic access, serial port, dial-up networking, headset, handsfree, generic object exchange, object push, file transfer, basic imaging, SIM access, and human interface device. To ensure interoperability between other devices supporting Bluetooth technology, use Nokia approved enhancements for this model. Check with the manufacturers of other devices to determine their compatibility with this device. Glossary: A profile corresponds to a service or a function, and defines how different devices connect. For example, the handsfree profile is used between a handsfree device and your device. For devices to be compatible, they must support the same profiles.There may be restrictions on using Bluetooth technology in some locations. Check with your local authorities or service provider.Features using Bluetooth technology, or allowing such features to run in the background while using other features, increase the demand on battery power and reduce the battery life.When the device is locked, you cannot use Bluetooth connectivity. See ‘Security’, p. 88 for more information on locking the device.R1114_en.book Page 70 Tuesday, January 24, 2006 2:04 PM
Connectivity71FCC DRAFTSettingsPress , and select Connect. > Bluetooth. When you open the application for the first time, you are asked to define a name for your device. After you set Bluetooth connectivity on and change My phone's visibility to Shown to all, your device and this name can be seen by other users with devices using Bluetooth technology.Select from the following:Bluetooth—To connect wirelessly to another compatible device, set Bluetooth connectivity On, and establish a connection.My phone's visibility—To allow your device to be found by other devices with Bluetooth technology, select Shown to all. To hide it from other devices, select Hidden.My phone's name—Edit the name of your device.Remote SIM mode—To enable another device, such as a compatible car kit enhancement, to use the SIM card in your device to connect to the network, select On.Remote SIM modeTo use the remote SIM mode with a compatible car kit enhancement, set Bluetooth connectivity on, and enable the use of the remote SIM mode with your device. Before the mode can be activated, the two devices must be paired and the pairing initiated from the other device. When pairing, use a 16-digit passcode, and set the other device as authorized. See ‘Pair devices’, p. 72. Activate the remote SIM mode from the other device.When remote SIM mode is on in your Nokia N71, Remote SIM is displayed in the standby mode. The connection to the wireless network is turned off, as indicated by in the signal strength indicator area, and you cannot use SIM card services or features requiring cellular network coverage.When the wireless device is in the remote SIM mode, you can only use a compatible connected enhancement, such as a car kit, to make or receive calls. Your wireless device will not make any calls, except to the emergency numbers programmed into your device, while in this mode. To make calls from your device, you must first leave the remote SIM mode. If the device has been locked, enter the code to unlock it first.To leave the remote SIM mode, press , and select Exit rem. SIM mode.Security tipsWhen you are not using Bluetooth connectivity, select Bluetooth > Off or My phone's visibility > Hidden.Do not pair with an unknown device.R1114_en.book Page 71 Tuesday, January 24, 2006 2:04 PM
Connectivity72FCC DRAFTSend dataSeveral Bluetooth connections can be active at a time. For example, if you are connected to a compatible headset, you can also transfer files to another compatible device at the same time.Bluetooth connectivity indicators• When is shown in the standby mode, Bluetooth connectivity is on.• When is blinking, your device is trying to connect with another device.• When is shown continuously, data is being transmitted. Tip! To send text, open Notes, write the text, and select Options > Send > Via Bluetooth.1Open the application where the item you want to send is stored. For example, to send an image to another compatible device, open Gallery.2Select the item and Options > Send > Via Bluetooth. Devices with Bluetooth technology within range start to appear on the display.Device icons: —computer, —phone, —audio or video device, and —other device.To interrupt the search, select Stop.3Select the device with which you want to connect.4If the other device requires pairing before data can be transmitted, a tone sounds, and you are asked to enter a passcode. See ‘Pair devices’, p. 72.5When the connection has been established, Sending data is shown.The Sent folder in Messaging does not store messages sent using Bluetooth connectivity. Tip! When searching for devices, some devices may show only the unique address (device address). To find the unique address of your device, enter the code *#2820# in the standby mode.Pair devicesTo open the paired devices view ( ), in the Bluetooth application main view, press .Before pairing, create your own passcode (1—16 digits), and agree with the owner of the other device to use the same code. Devices that do not have a user interface have a factory-set passcode. The passcode is used only once.To pair with a device, select Options > New paired device. Devices with wireless Bluetooth technology within range start to appear on the display. Select the device, and enter the passcode. The same passcode must be entered on the other device as well. After pairing, the device is saved to the paired devices view.R1114_en.book Page 72 Tuesday, January 24, 2006 2:04 PM
Connectivity73FCC DRAFTPaired devices are indicated by in the device search. To set a device as authorized or unauthorized, scroll to a device, and select from the following options:Set as authorized—Connections between your device and this device can be made without your knowledge. No separate acceptance or authorization is needed. Use this status for your own devices, such as your compatible headset or PC or devices that belong to someone you trust. indicates authorized devices in the paired devices view.Set as unauthorized—Connection requests from this device must be accepted separately every time.To cancel a pairing, scroll to the device, and select Options > Delete. If you want to cancel all pairings, select Options > Delete all.Tip! If you are currently connected to a device and delete the pairing with that device, pairing is removed immediately, and the connection is switched off.Receive dataWhen you receive data through Bluetooth connectivity, a tone sounds, and you are asked if you want to accept the message. If you accept, is shown, and the item is placed in the Inbox folder in Messaging. Messages received through Bluetooth connectivity are indicated by . See ‘Inbox—receive messages’, p. 39.Switch off Bluetooth connectivityTo switch off Bluetooth connectivity, select Bluetooth > Off.Infrared connectionWith infrared (IR), you can transfer data such as business cards, calendar notes, and media files with a compatible device.Do not point the IR beam at anyone's eye or allow it to interfere with other IR devices. This device is a Class 1 laser product.Send and receive data:1Make sure that the IR ports of the sending and receiving devices are pointing at each other, and that there are no obstructions between the devices. The preferable distance between the two devices is up to 1 meter (3 feet).2The user of the receiving device activates the IR port.To activate the IR port of your device to receive data, press , and select Connect. > Infrared.3The user of the sending device selects the desired IR function to start the data transfer.R1114_en.book Page 73 Tuesday, January 24, 2006 2:04 PM
Connectivity74FCC DRAFTTo send data, locate the desired file in an application or the file manager, and select Options > Send > Via infrared.If data transfer is not started within 1 minute after the activation of the IR port, the connection is cancelled and must be started again.All items received through IR are placed in the Inbox folder in Messaging. New IR messages are indicated by .When blinks, your device is trying to connect to the other device or a connection has been lost.When is shown continuously, the IR connection is active, and your device is ready to send and receive data using its IR port.Data cableTo select the function for which the USB data cable connection is used, press , and select Connect. > Data cable > Ask on connection, PC Suite, Data transfer, or PictBridge.PC connectionsYou can use your device with a variety of PC connectivity and data communications applications. For example, with Nokia PC Suite you can transfer images between your device and a compatible PC.Always create the connection from the PC to synchronize with your device.Your device as a modemYou can use your device as a modem to send and receive e-mail, or to connect to the Internet with a compatible PC by using Bluetooth connectivity, infrared, or a USB data cable. Detailed installation instructions can be found in the user guide for Nokia PC Suite.Tip! When using Nokia PC Suite for the first time, to connect your device to a compatible PC and to use Nokia PC Suite, use the Get Connected wizard available in Nokia PC Suite.Connection managerR1114_en.book Page 74 Tuesday, January 24, 2006 2:04 PM
Connectivity75FCC DRAFTPress , and select Connect. > Conn. mgr.. To view the status of data connections or end connections, select Active data connections.Data connectionsIn the active connections view, you can see the open data connections: data calls ( ) and packet data connections (). Note: The actual time invoiced for calls by your service provider may vary, depending on network features, rounding off for billing, and so forth.To end a connection, select Options > Disconnect. To close all open connections, select Options > Disconnect all.To view the details of a connection, select Options > Details. The details shown depend on the connection type.SynchronizationPress , and select Connect. > Sync. Sync enables you to synchronize your notes, calendar, contacts, or e-mail with various compatible calendar and address book applications on a compatible computer or on the Internet. You can also create or edit synchronization settings.The synchronization application uses SyncML technology for synchronization. For information on SyncML compatibility, contact the supplier of the application with which you want to synchronize your device data.You may receive synchronization settings in a special text message. See ‘Data and settings’, p. 40.Synchronize dataIn the Sync main view, you can see the different synchronization profiles.1Select a synchronization profile and Options > Synchronize. The status of the synchronization is shown on the display.To cancel synchronization before it finishes, select Cancel.You are notified when the synchronization is complete.2To view the log file showing the synchronization status and how many entries have been added, updated, deleted, or discarded (not synchronized) in your device or on the server, select Yes.Device managerPress , and select Connect. > Dev. mgr.. You may receive server profiles and different configuration settings R1114_en.book Page 75 Tuesday, January 24, 2006 2:04 PM
Connectivity76FCC DRAFTfrom your network operator, service provider, or company information management department. These configuration settings may include access point settings for data connections and other settings used by different applications in your device.To connect to a server and receive configuration settings for your device, scroll to a profile, and select Options > Start configuration.To allow or deny receiving of configuration settings from service providers, select Options > Enable config. or Disable config..Server profile settingsContact your service provider for the correct settings. Server name—Enter a name for the configuration server.Server ID—Enter the unique ID to identify the configuration server.Server password—Enter a password to identify your device to the server.Access point—Select an access point to be used when connecting to the server.Host address—Enter the URL address of the server.Port—Enter the port number of the server.User name and Password—Enter your user name and password.Allow configuration—To receive configuration settings from the server, select Yes.Auto-accept all reqs.—If you want your device to ask for confirmation before accepting a configuration from the server, select No.R1114_en.book Page 76 Tuesday, January 24, 2006 2:04 PM
Office77FCC DRAFTOfficeCalculatorTo add, substract, multiply, divide, and calculate square roots and percentages, press , and select Office > Calculator. Note: This calculator has limited accuracy and is designed for simple calculations.ConverterTo convert measures from one unit to another, press , and select Office > Converter.Converter has limited accuracy, and rounding errors may occur.1In the Type field, select the measure you want to use.2In first Unit field, select the unit from which you want to convert. In the next Unit field, select the unit to which you want to convert.3In the first Amount field, enter the value you want to convert. The other Amount field changes automatically to show the converted value.Set base currency and exchange ratesSelect Type > Currency > Options > Currency rates. Before you can make currency conversions, you must select a base currency and add exchange rates. The rate of the base currency is always 1. Note: When you change base currency, you must enter the new rates because all previously set exchange rates are set to zero. NotesTo write notes, press , and select Office > Notes. You can send notes to compatible devices, and save plain text files (.txt format) that you receive to Notes.To print a note on a compatible basic print profile (BPP) equipped printer with Bluetooth connectivity (such as HP Deskjet 450 Mobile Printer or HP Photosmart 8150), select Options > Print.R1114_en.book Page 77 Tuesday, January 24, 2006 2:04 PM
Office78FCC DRAFTRecorderTo record voice memos, press , and select Office > Recorder. To record a telephone conversation, open Recorder during a voice call. Both parties hear a tone every 5 seconds during recording.The recorder cannot be used when a data call or GPRS conection is active.R1114_en.book Page 78 Tuesday, January 24, 2006 2:04 PM
Personalize your device79FCC DRAFTPersonalize your deviceThe open applications and folders that have applications open are indicated by a small icon in the main menu.• To use the standby display for fast access to your most frequently used applications, see ‘Active standby mode’, p. 81.• To change the standby mode background image or what is shown in the screen saver, see ‘Change the look of your device’, p. 80.• To customize the ringing tones, see ‘Profiles—set tones’, p. 79 and ‘Add ringing tones for contacts’, p. 56.• To change the shortcuts assigned for the different presses of the scroll key and selection keys in the standby mode, see ‘Standby mode’, p. 84. • To configure the cover display, see ‘Cover display settings’, p. 84.• To change the clock shown in the standby mode, press , and select Clock > Options > Settings > Clock type > Analog or Digital.• To change the welcome note to an image or animation, press , and select Tools > Settings > Phone > General > Welcome note or logo.• To change the main menu view, in the main menu, select Options > View > Grid or List.• To rearrange the main menu, in the main menu, select Options > Move, Move to folder, or New folder. You can move less used applications into folders, and place applications that you use more often into the main menu.Profiles—set tonesTo set and customize the ringing tones, message alert tones, and other tones for different events, environments, or caller groups, press , and select Tools > Profiles.To change the profile, press in the standby mode. Scroll to the profile you want to activate, and select OK. Tip! In fold closed mode, press repeatedly until the desired profile is selected in the cover display, and press the cover key.R1114_en.book Page 79 Tuesday, January 24, 2006 2:04 PM
Personalize your device80FCC DRAFTTo modify a profile, press , and select Tools > Profiles. Scroll to the profile, and select Options > Customize. Scroll to the setting you want to change, and press to open the choices. Tones stored on the memory card are indicated with . You can scroll through the tone list and listen to each one before you make your selection. To stop the sound, press any key.When you choose a tone, Tone downloads opens a list of bookmarks. You can select a bookmark and start connection to a Web page to download tones.If you want the caller’s name to be said when your device rings, select Options > Customize > Say caller’s name > On. The caller’s name must be saved in Contacts.To create a new profile, select Options > Create new.Offline profileThe Offline profile lets you use the device without connecting to the wireless network. When you activate the Offline profile, the connection to the wireless network is turned off, as indicated by in the signal strength indicator area. All wireless phone signals to and from the device are prevented. If you try to send messages, they are placed in the outbox to be sent later. Warning: In the offline profile you cannot make or receive any calls, except make calls to certain emergency numbers, or use other features that require network coverage. To make calls, you must first activate the phone function by changing profiles. If the device has been locked, enter the lock code.To leave the Offline profile, press , and select another profile. The device re-enables wireless transmissions (providing there is sufficient signal strength). If a Bluetooth connection is activated before entering the Offline profile, it will be deactivated. A Bluetooth connection is automatically reactivated after leaving the Offline profile. See ‘Settings’, p. 71.Change the look of your deviceTo change the look of the display, such as the wallpaper and icons, press , and select Tools > Themes. The active theme is indicated by . In Themes you can group together elements from other themes or select images from the Gallery to personalize themes further. The themes on the memory card (if inserted) are indicated by . The themes on the memory card are not available if the memory card is not inserted in the device. If you want to use the themes saved in the memory card without the memory card, save the themes in the device memory first.To open a browser connection and download more themes, select Theme downloads.R1114_en.book Page 80 Tuesday, January 24, 2006 2:04 PM
Personalize your device81FCC DRAFTTo activate a theme, scroll to it, and select Options > Apply. To preview a theme before activating it, select Options > Preview.To edit themes, scroll to a theme, and select Options > Edit to change the Wallpaper and Power saver settings.To restore the selected theme to its original settings, select Options > Restore orig. theme when you edit a theme.Active standby modeUse your standby display for fast access to your most frequently used applications. By default, the active standby mode is on.Press , select Tools > Settings > Phone > Standby mode > Active standby, and press to switch the active standby on or off.The active standby display is shown with default applications across the top of the screen, and calendar, to-do, and player events listed below.Scroll to an application or event, and press .The standard scroll key shortcuts available in the standby mode cannot be used when the active standby mode is on.To change the default applications shortcuts, press , select Tools > Settings > Phone > Standby mode > Active standby apps., and press .Some shortcuts may be fixed, and you are not able to change them.R1114_en.book Page 81 Tuesday, January 24, 2006 2:04 PM
Tools82FCC DRAFTToolsSettings Wizard Use Settings Wizard to configure your device settings for e-mail, push to talk (network service).Press , and select Tools > Settings Wizard.Select the item from the menu that you want to configure your device for, and press .E-mail1When you choose to configure your e-mail settings, Settings Wizard detects your available network operator, and asks you to confirm it. Select OK, or scroll to another network operator, and select OK.2Settings Wizard prompts you to enter the details of your e-mail address, user name, and password.3Select each in turn, and select Options > Change. Enter the details, and select OK.4Select Options > OK when you are finished.5Select OK to confirm that you want to set up the mailbox for the specified operator.Push to talk (network service)1When you choose to configure your push to talk (PTT) settings, Settings Wizard detects your available network operator, and asks you to confirm it. Select OK, or scroll to another network operator, and select OK.2Some operators require a user name, password, and nickname. Select each in turn, and select Options > Change. Enter the details, and select OK.3Select Options > OK when you are finished.4Select OK to confirm that you want to set up PTT for the specified operator.OperatorThis menu item is only available if Settings Wizard detects that further operator settings are available.1When you choose to configure your operator settings, Settings Wizard detects your available network operator and asks you to confirm it. Select OK, or scroll to another network operator, and select OK.2Select OK to confirm that you want to configure your device for the specified operator.R1114_en.book Page 82 Tuesday, January 24, 2006 2:04 PM
Tools83FCC DRAFTUpdateIf you cannot find your network operator, or some settings are not available, you can check for an update to Settings Wizard, and download the latest settings. Select Options > Update to make an update.To start the updating process, you need to select the access point to be used by Settings Wizard.To update the settings database, you must have an Internet access point configured to your device. Check with your network operator for details.Share with a friendYou can share Settings Wizard with your friends using Bluetooth connectivity.From the main menu, select Options > Beam to friend.To send the application using Bluetooth connectivity, ensure that Bluetooth connectivity is switched on in both devices. Select Via Bluetooth.Select the recipient’s name, and select OK to start sending or Cancel to abort.More informationIf you experience any problems with Settings Wizard, visit http://www.nokia.com/phonesettings.SettingsTo change settings, press , and select Tools > Settings. To open a settings group, press . Scroll to a setting you want to change, and press .Some settings may be preset for the device by your network operator or service provider, and you may not be able to change them.Phone settingsGeneralPhone language—Changing the language of the display texts in your device also affects the format and separators used for date and time (for example, in calculations). Automatic selects the language according to the information on your SIM card. After you change the display text language, the device restarts.Changing the settings for Phone language or Writing language affects every application in your device, and the change remains effective until you change these settings again.R1114_en.book Page 83 Tuesday, January 24, 2006 2:04 PM
Tools84FCC DRAFTWriting language—Changing the language affects the characters and special characters available when writing text and the predictive text dictionary used.Predictive text—Set the predictive text input On or Off for the editors in the device. The predictive text dictionary is not available for all languages.Welcome note or logo—The welcome note or logo is displayed briefly each time you switch on the device. Select Default to use the default image, Text to write a welcome note, or Image to select an image from Gallery.Orig. phone settings—You can reset some of the settings to their original values. To do this, you need the lock code. See ‘Security’, p. 88, ‘Phone and SIM’, p. 89. After resetting, the device may take a longer time to power on. Documents and files are unaffected.Side key—Define the use of the side key for voice commands or PTT.Standby modeActive standby—Use shortcuts to applications in the standby mode. See ‘Active standby mode’, p. 81.Left selection key—Assign a shortcut to ( ) in the standby mode.Right selection key—Assign a shortcut to ( ) in the standby mode.Active standby apps.—Select the application shortcuts you want to appear in the active standby. This setting is only available if Active standby is on.You can also assign keypad shortcuts for the different presses of the scroll key. The scroll key shortcuts are not available if the Active standby is on.Operator logo—This setting is only available if you have received and saved an operator logo. Select Off if you do not want the logo to be shown.DisplayBrightness—Adjust the basic brightness level of the display to lighter or darker. However, in extreme light conditions, the brightness of the display is automatically adjusted.Pwr. saver time-out—Select the time-out period after which the power saver is activated.Light time-out—Select a time-out after which the backlight of the display is switched off.Cover display settingsBrightness—You can change the brightness of the cover display to lighter or darker. Changing the brightness of the cover display does not affect the brightness of the main display.R1114_en.book Page 84 Tuesday, January 24, 2006 2:04 PM
Tools85FCC DRAFTWallpaper—Select and crop a background image, and set how time is displayed on the cover display in the standby mode.Power saver—Select the cover display power saver type, its time-out period, and if an image or an animation screen saver is shown after the time-out period before the power saver is activated.Opening cover answer.—Select On to answer calls by opening the cover.Call settingsSend my caller ID—You can set your phone number to be displayed to (Yes) or hidden from (No) the person to whom you are calling, or the value may be set by your network operator or service provider when you make a subscription (Set by network) (network service).Call waiting—If you have activated call waiting (network service), the network notifies you of a new incoming call while you have a call in progress. Set the function on (Activate) or off (Cancel), or check whether the function is activated (Check status).Reject call with SMS—To send a text message to a caller informing why you could not answer the call, select Yes. See ‘Answer or reject a call’, p. 50.Message text—Write a text to be sent in a text message when you reject a call.Image in video call—You can deny video sending when you receive a video call. Select a still image to be displayed instead of video.Automatic redial—To set your device to make a maximum of 10 attempts to connect the call after an unsuccessful call attempt. To stop automatic redialing, press .Summary after call—Activate this setting if you want the device to briefly display the approximate duration of the last call.Speed dialling—To dial numbers assigned to the speed dialing keys ( - ) press and hold the key. See also ‘Speed dial a phone number’, p. 49.Anykey answer—To answer an incoming call, by pressing any key except , , , and , select On.Line in use—This setting (network service) is shown only if the SIM card supports two subscriber numbers, that is, two phone lines. Select which phone line you want to use for making calls and sending text messages. Calls on both lines can be answered irrespective of the selected line. If you select Line 2 and have not subscribed to this network R1114_en.book Page 85 Tuesday, January 24, 2006 2:04 PM
Tools86FCC DRAFTservice, you will not be able to make calls. When line 2 is selected, is shown in the standby mode. Tip! To switch between the phone lines, press and hold in the standby mode.Line change—To prevent line selection (network service), select Disable if supported by your SIM card. To change this setting, you need the PIN2 code.Connection settings Tip! Some of your device settings can be automatically set up using the Settings Wizard, see ‘Settings Wizard’ p. 82.Data connections and access pointsYour device supports packet data connections, such as GPRS in the GSM network. When you use your device in GSM network, multiple data connections can be active at the same time, and access points can share a data connection.To establish a data connection, an access point is required. You can define different kinds of access points:• MMS access point to send and receive multimedia messages• Access point for the Services application to view WML or XHTML pages• Internet access point (IAP) to send and receive e-mail and connect to the InternetCheck the type of access point you need with your service provider for the service you want to access. For availability and subscription to packet data connection services, contact your network operator or service provider.Access pointsYou may receive access point settings in a message from a service provider. See ‘Data and settings’, p. 40. Some or all access points may be preset for your device by your service provider or network operator, and you may not be able to change, create, edit, or remove them. indicates a protected access point. indicates a packet data access point.To create a new access point, select Options > New access point. To edit the settings of an access point, select Options > Edit. Follow the instructions from your service provider.Connection name—Enter a descriptive name for the connection.Data bearer—Select the data connection type.R1114_en.book Page 86 Tuesday, January 24, 2006 2:04 PM
Tools87FCC DRAFTDepending on the data connection you select, only certain setting fields are available. Fill in all fields marked with Must be defined or with a red asterisk. Other fields can be left empty, unless you have been instructed otherwise by your service provider.To be able to use a data connection, the network service provider must support this feature, and if necessary, activate it for your SIM card.Packet dataFollow the instructions from your service provider.Access point name—Obtain the access point name from your network operator or service provider.User name—The user name may be needed to make a data connection, and is usually provided by the service provider.Prompt password—If you must enter the password every time you log in to a server, or if you do not want to save your password in the device, select Yes.Password—A password may be needed to make a data connection, and is usually provided by the service provider.Authentication—Define the level of authentication: Normal or Secure.Homepage—Depending on the access point you are setting up, enter the Web address or the address of the multimedia messaging center.Select Options > Advanced settings to change the following settings:Network type—Select the Internet protocol type: IPv4 settings or IPv6 settings. The other settings depend on the selected network type.Phone IP address (for IPv4 only)—Enter the IP address of your device. DNS address—In Primary name server:, enter the IP address of the primary DNS server. In Second. name server:, enter the IP address of the secondary DNS server. Contact your Internet service provider to obtain these addresses.Proxy serv. address—Define the address for the proxy server.Proxy port number—Enter the proxy port number.Homepage—Define a home page.Select Options > Advanced settings and from the following:IPv4 settings > Phone IP address (the IP address of your device), Subnet mask (the subnet IP address), Default gateway (the gateway), and DNS address—Enter the IP R1114_en.book Page 87 Tuesday, January 24, 2006 2:04 PM
Tools88FCC DRAFTaddresses of the primary and secondary DNS server. Contact your Internet service provider for these addresses.IPv6 settings > DNS address—Select Automatic, Well-known, or User defined.Ad-hoc channel (only for Ad-hoc)—To enter a channel number (1-11) manually, select User defined.Proxy serv. address—Enter the address for the proxy server.Proxy port number—Enter the proxy port number.Packet dataThe packet data settings affect all access points using a packet data connection.Packet data conn.—If you select When available and you are in a network that supports packet data, the device registers to the packet data network. Starting an active packet data connection (for example, to send and receive e-mail) is quicker. If there is no packet data coverage, the device periodically tries to establish a packet data connection. If you select When needed, the device uses a packet data connection only if you start an application or action that needs it.Access point—The access point name is needed to use your device as a packet data modem to your computer.ConfigurationsYou may receive trusted server settings from your network operator or service provider in a configuration message, or the settings may be stored on your SIM card. You can save these settings to your device, view, or delete them in Configurations.Date and timeSee ‘Clock settings’, p. 12, and language settings in ‘General’, p. 83.SecurityPhone and SIMPIN code request—When active, the code is requested each time the device is switched on. Deactivating the personal identification number (PIN) code request may not be allowed by some SIM cards. See ‘Glossary of PIN and lock codes’, p. 89.PIN code, PIN2 code, and Lock code—You can change the lock code, PIN code, and PIN2 code. These codes can only include the numbers from 0 to 9. If you forget any of these R1114_en.book Page 88 Tuesday, January 24, 2006 2:04 PM
Tools89FCC DRAFTcodes, contact your service provider. See ‘Glossary of PIN and lock codes’, p. 89.Avoid using access codes similar to the emergency numbers to prevent accidental dialing of the emergency number.Autolock period—You can set an autolock period, a time-out after which the device automatically locks. To turn off the autolock period, select None.To unlock the device, enter the lock code.When the device is locked, calls still may be possible to the official emergency number programmed into your device. Tip! To lock the device manually, press . A list of commands opens. Select Lock phone.Lock if SIM changed—You can set the device to ask for the lock code when an unknown SIM card is inserted into your device. The device maintains a list of SIM cards that are recognized as the owner’s cards.Closed user group—You can specify a group of people to whom you can call and who can call you (network service).When calls are limited to closed user groups, calls still may be possible to the official emergency number programmed into your device.Confirm SIM services—You can set the device to display confirmation messages when you are using a SIM card service (network service).Glossary of PIN and lock codesIf you forget any of these codes, contact your service provider.Personal identification number (PIN) code—This code protects your SIM card against unauthorized use. The PIN code (4 to 8 digits) is usually supplied with the SIM card. After three consecutive incorrect PIN code entries, the code is blocked, and you need the PUK code to unblock it.PIN2 code—This code (4 to 8 digits) is supplied with some SIM cards, and is required to access some functions in your device.Lock code (also known as security code)—This code (5 digits) can be used to lock the device to avoid unauthorized use. The factory setting for the lock code is 12345. To avoid unauthorized use of your device, change the lock code. Keep the new code secret and in a safe place separate from your device. If you forget the code, contact your service provider.Personal unblocking key (PUK) code and PUK2 code—These codes (8 digits) are required to change a blocked PIN code or PIN2 code, respectively. If the codes are not supplied with the SIM card, contact the operator whose SIM card is in your device.R1114_en.book Page 89 Tuesday, January 24, 2006 2:04 PM
Tools90FCC DRAFTCertif. managementDigital certificates do not guarantee safety; they are used to verify the origin of software.In the certificate management main view, you can see a list of authority certificates that are stored in your device. Press to see a list of personal certificates, if available.Digital certificates should be used if you want to connect to an online bank or another site or remote server for actions that involve transferring confidential information. They should also be used if you want to reduce the risk of viruses or other malicious software and be sure of the authenticity of software when downloading and installing software. Important: Even if the use of certificates makes the risks involved in remote connections and software installation considerably smaller, they must be used correctly in order to benefit from increased security. The existence of a certificate does not offer any protection by itself; the certificate manager must contain correct, authentic, or trusted certificates for increased security to be available. Certificates have a restricted lifetime. If Expired certificate or Certificate not valid yet is shown even if the certificate should be valid, check that the current date and time in your device are correct.View certificate detailsYou can only be sure of the correct identity of a server when the signature and the period of validity of a server certificate have been checked.You are notified if the identity of the server is not authentic or if you do not have the correct security certificate in your device.To check certificate details, scroll to a certificate, and select Options > Certificate details. When you open certificate details, the validity of the certificate is checked, and one of the following notes may be displayed:Certificate not trusted—You have not set any application to use the certificate. See ‘Change the trust settings’, p. 90.Expired certificate—The period of validity has ended for the selected certificate.Certificate not valid yet—The period of validity has not yet begun for the selected certificate.Certificate corrupted—The certificate cannot be used. Contact the certificate issuer.Change the trust settingsBefore changing any certificate settings, you must make sure that you really trust the owner of the certificate and that the certificate really belongs to the listed owner.R1114_en.book Page 90 Tuesday, January 24, 2006 2:04 PM
Tools91FCC DRAFTScroll to an authority certificate, and select Options > Trust settings. Depending on the certificate, a list of the applications that can use the selected certificate is shown. For example:Symbian installation: Yes—The certificate is able to certify the origin of a new Symbian operating system application.Internet > Yes—The certificate is able to certify servers.App. installation > Yes—The certificate is able to certify the origin of a new JavaTM application.Select Options > Edit trust setting to change the value.Track protect. objectSome copyright-protected music files may include a transaction identifier. Select whether you allow the identifier to be sent with the music file if you send or forward the file. The provider of the music file can use the identifier to track the distribution of the files.Call divertingCall diverting allows you to divert your incoming calls to your voice mailbox or another phone number. For details, contact your service provider.Select which calls you want to divert and the desired divert option. To divert voice calls when your number is busy or when you reject incoming calls, select If busy. Set the option on (Activate) or off (Cancel), or check whether the option is activated (Check status).Several divert options can be active at the same time. When all calls are diverted, is shown in the standby mode.Call barring and call diverting cannot be active at the same time.Call barring Call barring (network service) allows you to restrict the calls that you make or receive with the device. To change the settings, you need the barring password from your service provider.Select the desired barring option, and set it on (Activate) or off (Cancel), or check whether the option is active (Check status). Call barring affects all calls, including data calls.Call barring and call diverting cannot be active at the same time.When calls are barred, calls still may be possible to the official emergency number programmed into your device.R1114_en.book Page 91 Tuesday, January 24, 2006 2:04 PM
Tools92FCC DRAFTNetworkOperator selection—Select Automatic to set the device to search for and select one of the available networks, or Manual to manually select the network from a list of networks. If the connection to the manually selected network is lost, the device sounds an error tone and asks you to reselect a network. The selected network must have a roaming agreement with your home network, that is, the operator whose SIM card is in your device. Glossary: A roaming agreement is an agreement between two or more network service providers to enable the users of one service provider to use the services of other service providers.Cell info display—Select On to set the device to indicate when it is used in a cellular network based on microcellular network (MCN) technology and to activate cell info reception.Enhancement settingsIn the standby mode, indicates a compatible headset is connected, and that the headset is unavailable, or a Bluetooth connection to a headset is lost. indicates a compatible loopset is connected, that a TTY is connected, and that a car kit is connected.Select Headset, Loopset, TTY, Bluetooth handsfree, or Car kit and from the following:Default profile—Set the profile that you want activated each time you connect a certain enhancement to your device. See ‘Profiles—set tones’, p. 79. Automatic answer—Set if you want the device to answer an incoming call automatically after 5 seconds. If the Ringing type is set to Beep once or Silent, automatic answer is disabled. Automatic answer is not available for TTY.If you are using a TTY, you must activate it on your device. Press , and select Tools > Settings > Enhancement > TTY > Use TTY > Yes.Voice commandsYou can use voice commands to control your device. For more information about the enhanced voice commands supported by your device, see ‘Voice dialing’, p. 49.To activate enhanced voice commands for starting applications and profiles, you must open the Voice com. application and its Profiles folder. Press , and select R1114_en.book Page 92 Tuesday, January 24, 2006 2:04 PM
Tools93FCC DRAFTTools > Voice com. > Profiles; the device creates voice tags for the applications and profiles. To use enhanced voice commands, press and hold in the standby mode, and say a voice command. The voice command is the name of the application or profile displayed in the list. Tip! Alternatively, to define the side key to use voice commands, see ‘General’, p. 83.To add more applications to the list, select Options > New application. To add a second voice command that can be used to start the application, select Options > Change command, and enter the new voice command as text. Avoid very short names, abbreviations, and acronyms.To listen to the synthesized voice tag, select Options > Playback.To change voice command settings, select Options > Settings. To switch off the synthesizer that plays recognized voice tags and commands in the selected device language, select Synthesizer > Off. To reset voice recognition learning (for example, when the main user of the device has changed), select Reset voice adapts..Application managerPress , and select Tools > Manager. You can install two types of applications and software to your device:• J2ME™ applications based on Java technology with the extension .jad or .jar ( ). • Other applications and software suitable for the Symbian operating system ( ). The installation files have the .sis extension. Only install software specifically designed for your Nokia N71. Software providers will often refer to the official model number of this product: the Nokia N71-1.Installation files may be transferred to your device from a compatible computer, downloaded during browsing, or sent to you in a multimedia message, as an e-mail attachment, or using Bluetooth connectivity or infrared. You can use Nokia Application Installer in Nokia PC Suite to install an application to your device. If you use Microsoft Windows Explorer to transfer a file, save the file to a compatible memory card (local disk).Install applications and software indicates a .sis application, a Java application, that the application is not fully installed, and that the application is installed on the memory card. Important: Only install and use applications and other software from sources that offer adequate security and protection against harmful software.Before installation, note the following:R1114_en.book Page 93 Tuesday, January 24, 2006 2:04 PM
Tools94FCC DRAFT• To view the application type, version number, and the supplier or manufacturer of the application, select Options > View details.• To display the security certificate details of the application, select Options > View certificate. See ‘Certif. management’, p. 90.• If you install a file that contains an update or repair to an existing application, you can only restore the original application if you have the original installation file or a full back-up copy of the removed software package. To restore the original application, remove the application, and install the application again from the original installation file or the back-up copy.• The .jar file is required for installing Java applications. If it is missing, the device may ask you to download it. If there is no access point defined for the application, you are asked to select one. When you are downloading the .jar file, you may need to enter a user name and password to access the server. You obtain these from the supplier or manufacturer of the application.1To locate an installation file, press , and select Tools > Manager. Alternatively, search the device memory or a memory card (if inserted) in File mgr., or open a message in Messaging > Inbox that contains an installation file.2In Manager, select Options > Install. In other applications, scroll to the installation file, and press to start the installation.During installation, the device shows information about the progress of the installation. If you are installing an application without a digital signature or certification, the device displays a warning. Continue installation only if you are sure of the origin and contents of the application.To start an installed application, locate it in the menu, and press .To start a network connection and to view extra information about the application, select Options > Go to web address, if available.To see what software packages are installed or removed and when, select Options > View log.To send your installation log to a help desk so that they can see what is installed or removed, select Options > Send log > Via text message or Via e-mail (available only if the correct e-mail settings are in place).Remove applications and softwareScroll to a software package, and select Options > Remove. Select Yes to confirm.R1114_en.book Page 94 Tuesday, January 24, 2006 2:04 PM
Tools95FCC DRAFTIf you remove software, you can only reinstall it if you have the original software package or a full backup of the removed software package. If you remove a software package, you may no longer be able to open documents created with that software. Note: If another software package depends on the software package that you removed, the other software package may stop working. Refer to the documentation of the installed software package for details.SettingsSelect Options > Settings and from the following:Online certif. check—Select to check the online certificates before installing an application.Default web address—Set the default address used when checking online certificates.Some Java applications may require a phone call, a message to be sent, or a network connection to a specific access point for downloading extra data or components. In the Manager main view, scroll to an application, and select Options > Suite settings to change settings related to that specific application.Activation keysTo view the digital rights activation keys stored in your device, press , and select Tools > Activ. keys and from the following:Valid keys—View keys that are connected to one or more media files and keys whose validity period has not started yet.Invalid keys—View keys that are not valid; the time period for using the media file is exceeded or there is a protected media file in the device but no connected activation key.Keys not in use—View keys that have no media files connected to them in the device.To buy more usage time or extend the usage period for a media file, select an invalid activation key and Options > Activate content. Activation keys cannot be updated if Services message reception is disabled. See ‘Service messages’, p. 40.To view detailed information, such as the validity status and ability to send the file, scroll to an activation key, and press .R1114_en.book Page 95 Tuesday, January 24, 2006 2:04 PM
Troubleshooting96FCC DRAFTTroubleshootingQ&AAccess codesQ: What is my password for the lock, PIN, or PUK codes?A: The default lock code is 12345. If you forget or lose the lock code, contact your device dealer. If you forget or lose a PIN or PUK code, or if you have not received such a code, contact your service provider. For information about passwords, contact your access point provider, for example, a commercial Internet service provider (ISP), service provider, or network operator.Application not respondingQ: How do I close an application that is not responding?A: To open the application switching window, press and hold . Scroll to the application, and press to close the application.Bluetooth connectivityQ: Why can’t I find my friend’s device?A: Check that both devices have activated Bluetooth connectivity. Check that the distance between the two devices is not over 10 meters (33 feet) and that there are no walls or other obstructions between the devices. Check that the other device is not in hidden mode. Check that both devices are compatible.Q: Why can’t I end a Bluetooth connection?A: If another device is connected to your device, you can end the connection using the other device, or by deactivating Bluetooth connectivity. Select Connect. > Bluetooth > Off.Browser servicesQ: What do I do if the following message is displayed: No valid access point defined. Define one in Web settings.? A: Insert the correct browser settings. Contact your service provider for instructions. CameraQ: Why do images look smudgy?A: Remove the protective plastic films covering the display and camera. Ensure that the camera lens protection window is clean. DisplayQ: Why do missing, discolored, or bright dots appear on the screen every time I turn on my device?A: This is a characteristic of this type of display. Some displays may contain pixels or dots that remain on or off. This is normal, not a fault.R1114_en.book Page 96 Tuesday, January 24, 2006 2:04 PM
Troubleshooting97FCC DRAFTLogQ: Why does the log appear empty?A: You may have activated a filter, and no communication events fitting that filter have been logged. To see all events, select My own > Log > Options > Filter > All communication.Memory lowQ: What can I do if my device memory is low?A: You can delete the following items regularly to avoid memory getting low:• Messages from Inbox, Drafts, and Sent folders in Messaging• Retrieved e-mail messages from the device memory• Saved browser pages• Images and photos in GalleryTo delete contact information, calendar notes, call timers, call cost timers, game scores, or any other data, go to the respective application to remove the data. If you are deleting multiple items and one of the following notes are shown: Not enough memory to perform operation. Delete some data first. or Memory low. Delete some data., try deleting items one by one (starting from the smallest item).Q: How can I save my data before deleting it?A: Save your data using one of the following methods:• Use Nokia PC Suite to make a backup copy of all data to a compatible computer.• Send images to your e-mail address; then save the images to your computer.• Send data using Bluetooth connectivity to a compatible device.• Store data on a compatible memory card.MessagingQ: Why can’t I select a contact?A: The contact card does not have a phone number or an e-mail address. Add the missing information to the contact card in Contacts.Multimedia messagingQ: What should I do when the device cannot receive a multimedia message because memory is full?A: The amount of memory needed is indicated in the error message: Not enough memory to retrieve message. Delete some data first. To view what kind of data you have and how much memory the different data groups consume, select File manager > Options > Memory details.Q: The note Retrieving message is shown briefly. What is happening? A: The device is trying to retrieve a multimedia message from the multimedia messaging center. Check that the settings for multimedia messaging are defined correctly and that there are no mistakes in phone numbers or addresses. Select Messaging > Options > Settings > Multimedia message.R1114_en.book Page 97 Tuesday, January 24, 2006 2:04 PM
Troubleshooting98FCC DRAFTQ: How can I end the data connection when the device starts a data connection again and again? A: To stop the device from making a data connection, select Messaging and one of the following:On receiving msg. > Defer retrieval—To have the multimedia messaging center save the message to be retrieved later, for example, after you have checked the settings. After this change, the device still needs to send information notes to the network. To retrieve the message now, select Retr. immediately.On receiving msg. > Reject message—To reject all incoming multimedia messages. After this change, the device needs to send information notes to the network, and the multimedia messaging center deletes multimedia messages that are waiting to be sent to you.Multimedia reception > Off—To ignore all incoming multimedia messages. After this change, the device does not make any network connections related to multimedia messaging. PC connectivityQ: Why do I have problems in connecting the device to my PC?A: Make sure that Nokia PC Suite is installed and running on your PC. See the user guide for Nokia PC Suite on the CD-ROM. For further information on how to use Nokia PC Suite, see the help function on Nokia PC Suite or visit the support pages at www.nokia.com.Q: Can I use my device as a fax modem with a compatible PC?A: You cannot use your device as a fax modem. However, with call diverting (network service), you can divert incoming fax calls to another phone number.Q: Why does sending images and videos fail, when I send them to a compatible PC that has been successfully paired with my device?A: The PC may reject the images and videos. Check the manual of the PC’s operating system for the correct configuration of PIM settings.R1114_en.book Page 98 Tuesday, January 24, 2006 2:04 PM
Battery information99FCC DRAFTBattery informationCharging and dischargingYour device is powered by a rechargeable battery. The full performance of a new battery is achieved only after two or three complete charge and discharge cycles. The battery can be charged and discharged hundreds of times but it will eventually wear out. When the talk and standby times are noticeably shorter than normal, replace the battery. Use only Nokia approved batteries, and recharge your battery only with Nokia approved chargers designated for this device.Unplug the charger from the electrical plug and the device when not in use. Do not leave fully charged battery connected to a charger, since overcharging may shorten its lifetime. If left unused, a fully charged battery will lose its charge over time.If the battery is completely discharged, it may take a few minutes before the charging indicator appears on the display or before any calls can be made.Use the battery only for its intended purpose. Never use any charger or battery that is damaged.Do not short-circuit the battery. Accidental short-circuiting can occur when a metallic object such as a coin, clip, or pen causes direct connection of the positive (+) and negative (-) terminals of the battery. (These look like metal strips on the battery.) This might happen, for example, when you carry a spare battery in your pocket or purse. Short-circuiting the terminals may damage the battery or the connecting object.Leaving the battery in hot or cold places, such as in a closed car in summer or winter conditions, will reduce the capacity and lifetime of the battery. Always try to keep the battery between 15°C and 25°C (59°F and 77°F). A device with a hot or cold battery may not work temporarily, even when the battery is fully charged. Battery performance is particularly limited in temperatures well below freezing.Do not dispose of batteries in a fire as they may explode. Batteries may also explode if damaged. Dispose of batteries according to local regulations. Please recycle when possible. Do not dispose as household waste.Nokia battery authentication guidelinesAlways use original Nokia batteries for your safety. To check that you are getting an original Nokia battery, purchase it from an authorized Nokia dealer, look for the Nokia Original Enhancements logo on the packaging and inspect the hologram label using the following steps:Successful completion of the four steps is not a total assurance of the authenticity of the battery. If you have any reason to believe that your battery is not an authentic original Nokia battery, you should refrain from using it and take it to the nearest authorized Nokia service point or dealer for R1114_en.book Page 99 Tuesday, January 24, 2006 2:04 PM
Battery information100FCC DRAFTassistance. Your authorized Nokia service point or dealer will inspect the battery for authenticity. If authenticity cannot be verified, return the battery to the place of purchase.Authenticate hologram1 When looking at the hologram on the label, you should see the Nokia connecting hands symbol from one angle and the Nokia Original Enhancements logo when looking from another angle.2 When you angle the hologram left, right, down, and up, you should see 1, 2, 3, and 4 dots on each side respectively.3 Scratch the side of the label to reveal a 20-digit code, for example 12345678919876543210. Turn the battery so that the numbers are facing upwards. The 20-digit code reads starting from the number at the top row followed by the bottom row.4 Confirm that the 20-digit code is valid by following the instructions at www.nokia.com/batterycheck.To create a text message, key in the 20-digit code, for example 12345678919876543210, and send to +44 7786 200276.National and international operator charges will apply.You should receive a message indicating whether the code can be authenticated.What if your battery is not authentic?If you cannot confirm that your Nokia battery with the hologram on the label is an authentic Nokia battery, please do not use the battery. Take it to the nearest authorized Nokia service point or dealer for assistance. The use of a battery that is not approved by the manufacturer may be dangerous and may result in poor performance and damage to your device and its enhancements. It may also invalidate any approval or warranty applying to the device.To find out more about original Nokia batteries, visit www.nokia.com/battery. R1114_en.book Page 100 Tuesday, January 24, 2006 2:04 PM
Care and maintenance101FCC DRAFTCare and maintenanceYour device is a product of superior design and craftsmanship and should be treated with care. The suggestions below will help you protect your warranty coverage.• Keep the device dry. Precipitation, humidity and all types of liquids or moisture can contain minerals that will corrode electronic circuits. If your device does get wet, remove the battery and allow the device to dry completely before replacing it.• Do not use or store the device in dusty, dirty areas. Its moving parts and electronic components can be damaged.• Do not store the device in hot areas. High temperatures can shorten the life of electronic devices, damage batteries, and warp or melt certain plastics.• Do not store the device in cold areas. When the device returns to its normal temperature, moisture can form inside the device and damage electronic circuit boards.• Do not attempt to open the device other than as instructed in this guide.• Do not drop, knock, or shake the device. Rough handling can break internal circuit boards and fine mechanics.• Do not use harsh chemicals, cleaning solvents, or strong detergents to clean the device.• Do not paint the device. Paint can clog the moving parts and prevent proper operation.• Use a soft, clean, dry cloth to clean any lenses (such as camera, proximity sensor, and light sensor lenses).• Use only the supplied or an approved replacement antenna. Unauthorized antennas, modifications, or attachments could damage the device and may violate regulations governing radio devices.• Use chargers indoors.• Always create a backup of data you want to keep (such as contacts and calendar notes) before sending your device to a service facility.All of the above suggestions apply equally to your device, battery, charger, or any enhancement. If any device is not working properly, take it to the nearest authorized service facility for service.R1114_en.book Page 101 Tuesday, January 24, 2006 2:04 PM
Additional safety information102FCC DRAFTAdditional safety informationYour device and its enhancements may contain small parts. Keep them out of the reach of small children.Operating environmentRemember to follow any special regulations in force in any area and always switch off your device when its use is prohibited or when it may cause interference or danger. Use the device only in its normal operating positions.This device meets RF exposure guidelines when used either in the normal use position against the ear or when positioned at least 7/8 inch (2.2 cm) away from the body. When a carry case, belt clip, or holder is used for body-worn operation, it should not contain metal and should position the device at least 7/8 inch (2.2 cm) away from your body.In order to transmit data files or messages, this device requires a quality connection to the network. In some cases, transmission of data files or messages may be delayed until such a connection is available. Ensure the aboveseparation distance instructions are followed until the transmission is completed.Medical devicesOperation of any radio transmitting equipment, including wireless phones, may interfere with the functionality of inadequately protected medical devices. Consult a physician or the manufacturer of the medical device to determine if they are adequately shielded from external RF energy or if you have any questions. Switch off your device in health care facilities when any regulations posted in these areas instruct you to do so. Hospitals or health care facilities may be using equipment that could be sensitive to external RF energy.Pacemakers Pacemaker manufacturers recommend that a minimum separation of 15.3 centimeters (6 inches) be maintained between a wireless phone and a pacemaker to avoid potential interference with the pacemaker. These recommendations are consistent with the independent research by and recommendations of Wireless Technology Research. Persons with pacemakers should:• always keep the device more than 15.3 centimeters (6 inches) from their pacemaker;• not carry the device in a breast pocket; and • hold the device to the ear opposite the pacemaker to minimize the potential for interference.If you suspect interference, switch off your device and move the device away.Hearing aids Some digital wireless devices may interfere with some hearing aids. If interference occurs, consult your service provider.R1114_en.book Page 102 Tuesday, January 24, 2006 2:04 PM
Additional safety information103FCC DRAFTVehiclesRF signals may affect improperly installed or inadequately shielded electronic systems in motor vehicles such as electronic fuel injection systems, electronic antiskid (antilock) braking systems, electronic speed control systems, and air bag systems. For more information, check with the manufacturer or its representative of your vehicle or any equipment that has been added.Only qualified personnel should service the device, or install the device in a vehicle. Faulty installation or service may be dangerous and may invalidate any warranty that may apply to the device. Check regularly that all wireless device equipment in your vehicle is mounted and operating properly. Do not store or carry flammable liquids, gases, or explosive materials in the same compartment as the device, its parts, or enhancements. For vehicles equipped with an air bag, remember that air bags inflate with great force. Do not place objects, including installed or portable wireless equipment in the area over the air bag or in the air bag deployment area. If in-vehicle wireless equipment is improperly installed and the air bag inflates, serious injury could result.Using your device while flying may be prohibited. Switch off your device before boarding an aircraft. The use of wireless teledevices in an aircraft may be dangerous to the operation of the aircraft, disrupt the wireless telephone network, and may be illegal.Potentially explosive environmentsSwitch off your device when in any area with a potentially explosive atmosphere and obey all signs and instructions. Potentially explosive atmospheres include areas where you would normally be advised to turn off your vehicle engine. Sparks in such areas could cause an explosion or fire resulting in bodily injury or even death. Switch off the device at refuelling points such as near gas pumps at service stations. Observe restrictions on the use of radio equipment in fuel depots, storage, and distribution areas, chemical plants or where blasting operations are in progress. Areas with a potentially explosive atmosphere are often but not always clearly marked. They include below deck on boats, chemical transfer or storage facilities, vehicles using liquefied petroleum gas (such as propane or butane), and areas where the air contains chemicals or particles such as grain, dust or metal powders.Emergency calls Important: Wireless phones, including this device, operate using radio signals, wireless networks, landline networks, and user-programmed functions. Because of this, connections in all conditions cannot be guaranteed. You should never rely solely on any wireless device for essential communications like medical emergencies.R1114_en.book Page 103 Tuesday, January 24, 2006 2:04 PM
Additional safety information104FCC DRAFTTo make an emergency call: 1If the device is not on, switch it on. Check for adequate signal strength. Some networks may require that a valid SIM card is properly inserted in the device.2Press as many times as needed to clear the display and ready the device for calls. 3Enter the official emergency number for your present location. Emergency numbers vary by location.4Press the key.If certain features are in use, you may first need to turn those features off before you can make an emergency call. Consult this guide or your service provider for more information.When making an emergency call, give all the necessary information as accurately as possible. Your wireless device may be the only means of communication at the scene of an accident. Do not end the call until given permission to do so.Certification information (SAR)THIS DEVICE MEETS THE GOVERNMENT’S REQUIREMENTS FOR EXPOSURE TO RADIO WAVES.Your mobile device is a radio transmitter and receiver. It is designed and manufactured not to exceed the limits for exposure to radio frequency (RF) energy adopted by the governments of the USA through the Federal Communications Commission (FCC) and Canada through Industry Canada (IC). These limits establish permitted levels of RF energy for the general population. The guidelines are based on standards that were developed by independent scientific organizations through periodic and thorough evaluation of scientific studies. The standards include a substantial safety margin designed to assure the safety of all persons, regardless of age and health.The exposure guidelines for mobile devices employ a unit of measurement known as the Specific Absorption Rate or SAR. The SAR limit adopted by the USA and Canada is 1.6 watts/kilogram (W/kg) averaged over one gram of tissue. The limit incorporates a substantial margin of safety to give additional protection for the public and to account for any variations in measurements. Tests for SAR are conducted using standard operating positions with the device transmitting at its highest certified power level in all tested frequency bands. The actual SAR level of an operating device can be well below the maximum value because the device is designed to use only the power required to reach the network. That amount changes depending on a number of factors such as how close you are to a network base station.The highest SAR value reported to the FCC and IC for this device type when tested for use at the ear is 0.41W/kg, and when properly worn on the body is 0.24W/kg. SAR information on file with the FCC can be found under the Display Grant section of http://www.fcc.gov/oet/fccid after searching on FCC ID OW3RM-112. SAR values reported in other countries may vary depending on differences in reporting and testing requirements and the network band. Additional SAR information may be provided under product information at http://www.nokia.com.Complete_Safety.fm Page 104 Tuesday, May 23, 2006 11:51 AM
FCC DRAFTIndex105IndexAaccess points 86settings 86activate loudspeakerwith closed cover 51activation keys 95alarmsalarm clock 11applicationsinstalling 93Java 93Bbacking up 12Bluetooth 70connecting two devices, pairing 72device address 72headset 92pairing 72security 71switching off 73bookmarks 57brightnessdisplay 84setting in camera 17, 22Ccache, clearing 59calendarcreate entries 61synchronizing PC Suite 61call registerSee logcallsdialled numbers 51duration 51international 48received 51settings 85settings for call forwarding 91transferring 51cameraadjusting brightness 16, 17, 22adjusting colour and lighting 18, 23adjusting flash settings 16adjusting video recorder settings 23edit videos 26flash 18image setup settings 16, 18, 23saving video clips 22self-timer 19sending images 17sequence mode 18still image camera settings 19certificates 90chatSee instant messagingclear screenSee standby modeclock 11alarm 11settings 12codes 88lock codePIN code 89PIN2 code 89security code 89computer connections 74conference call 48connection settings 86contact cards 54inserting pictures 54sending 54storing DTMF tones 51R1114_en.book Page 105 Tuesday, January 24, 2006 2:04 PM
FCC DRAFTIndex106copyingcontacts between the SIM card and device memory 55copyright protectionsee activation keysDdata connectionsdetails 75ending 75indicators 10date 11device manager 75digital rights management, DRMsee activation keysEediting videosadding effects 26adding sound clips 26adding transitions 26custom video clips 26e-mail 38automatic retrieving 42opening 42remote mailbox 41retrieving from mailbox 41settings 45viewing attachments 42Ffile formats.jad 93.jar 93, 94.sis 93RealPlayer 31file manager 13fixed dialing 55FM radio 64Ggalleryordering files in albums 29presentations 28Hhandsfreesee loudspeakerheadset settings 92help application 15Iindicators 10instant messaging 66blocking 68connecting to a server 67recording messages 68sending instant messages 68InternetSee WebInternet access points (IAP)See access pointsJJavaSee applicationsLlock code 89logerasing contents 52filtering 52log duration 52loopset settings 92loudspeaker 11Mmailbox 41automatic retrieving 42media filesfast forward 31file formats 31mute sound 31rewind 31memoryclearing memory 13, 51, 52viewing memory consumption 13memory card 12menu, rearranging 79messagingR1114_en.book Page 106 Tuesday, January 24, 2006 2:04 PM
FCC DRAFTIndex107e-mail 38multimedia messages 37text messages 37movies, muveescustom muvees 33quick muvees 33multimedia messages 37music player 63mute sound 31Ppacket data connectionssettings 88PC connections 74PC Suitecalendar data 61synchronization 74transferring images to a PC 25transferring music files to your memory card 63viewing device memory data 11, 14personalization 80phonebookSee contact cardsPIN code 89profiles 79Rradio 64remote mailbox 41remote SIM mode 71ringing tonespersonal ringing tone 56receiving in a text message 40Ssecurity codeSee lock codesendingcontact cards, business cards 54images 17video clips 28service commands 36Servicesbrowser 57settingsaccess codes 88access points 86Bluetooth connectivity 71calendar 62call forwarding 91call restriction 91certificates 90cover display 84data connections 86date and time 88display 84IM 67, 69language 83lock code 89original settings 84personalizing the phone 79PIN code 89screen saver 84shortcuts 14SIM cardcopying names and numbers to phone 55messages 43names and numbers 55sis file 93snooze 11softwaretransferring a file to your device 93sound clips 25soundsmuting a ringing tone 50recording sounds 78speed dialing 49standby mode 79SVG files 28synchronization 75Ttext messages 37R1114_en.book Page 107 Tuesday, January 24, 2006 2:04 PM
FCC DRAFTIndex108themes 80time 11transferring content from another device 9UUSSD commands 36Vvideo clips 25video playerSee RealPlayerVisual Radio 64viewing content 66visual service ID 66voice commands 92voice dialing 49voice mailbox 48changing the phone number 16, 48forwarding calls to voice mailbox 91voice messages 48voice tags 92making calls 49volume control 11during a call 48loudspeaker 11WWebaccess points, see access pointsR1114_en.book Page 108 Tuesday, January 24, 2006 2:04 PM

Navigation menu