Microsoft RM-112 GSM 900/1800/1900 Cellular Telephone w/ BT User Manual R1114 en
Microsoft Mobile Oy GSM 900/1800/1900 Cellular Telephone w/ BT R1114 en
Manual
FCC DRAFT
Nokia N71 User Guide
9237522
FCC Draft
R1114_en.book Page 1 Tuesday, January 24, 2006 2:04 PM
FCC DRAFT
DECLARATION OF CONFORMITY
We, NOKIA CORPORATION declare under our sole
responsibility that the product RM-112 is in
conformity with the provisions of the following
Council Directive: 1999/5/EC. A copy of the
Declaration of Conformity can be found at http://
www.nokia.com/phones/declaration_of_conformity/
The crossed-out wheeled bin means that within the European Union the
product must be taken to separate collection at the product end-of-life.
This applies to your device but also to any enhancements marked with
this symbol. Do not dispose of these products as unsorted municipal
waste.
Copyright © 2006 Nokia. All rights reserved.
Reproduction, transfer, distribution or storage of part or all of the contents in this
document in any form without the prior written permission of Nokia is prohibited.
Nokia, Nokia Connecting People, Pop-Port, and Visual Radio are trademarks or
registered trademarks of Nokia Corporation. Other product and company names
mentioned herein may be trademarks or tradenames of their respective owners.
Nokia tune is a sound mark of Nokia Corporation.
This product includes software licensed from Symbian Software Ltd (c) 1998-
200(6). Symbian and Symbian OS are trademarks of Symbian Ltd.
Java™ and all Java-based marks are trademarks or registered trademarks of Sun
Microsystems, Inc.
Stac ®, LZS ®, ©1996, Stac, Inc., ©1994-1996 Microsoft Corporation. Includes one
or more U.S. Patents: No. 4701745, 5016009, 5126739, 5146221, and 5414425.
Other patents pending.
Hi/fn ®, LZS ®,©1988-98, Hi/fn. Includes one or more U.S. Patents: No. 4701745,
5016009, 5126739, 5146221, and 5414425. Other patents pending.
Part of the software in this product is © Copyright ANT Ltd. 1998. All rights reserved.
US Patent No 5818437 and other pending patents. T9 text input software Copyright
(C) 1997-2006. Tegic Communications, Inc. All rights reserved.
This product is licensed under the MPEG-4 Visual Patent Portfolio License (i) for
personal and noncommercial use in connection with information which has been
encoded in compliance with the MPEG-4 Visual Standard by a consumer engaged
in a personal and noncommercial activity and (ii) for use in connection with
MPEG-4 video provided by a licensed video provider. No license is granted or shall
be implied for any other use. Additional information including that relating to
promotional, internal and commercial uses may be obtained from MPEG LA, LLC.
See <http://www.mpegla.com>.
Nokia operates a policy of ongoing development. Nokia reserves the right to make
changes and improvements to any of the products described in this document
without prior notice.
Under no circumstances shall Nokia be responsible for any loss of data or income
or any special, incidental, consequential or indirect damages howsoever caused.
The contents of this document are provided ‘as is’. Except as required by applicable
law, no warranties of any kind, either express or implied, including, but not limited
to, the implied warranties of merchantability and fitness for a particular purpose,
are made in relation to the accuracy, reliability or contents of this document. Nokia
reserves the right to revise this document or withdraw it at any time without prior
notice.
The availability of particular products may vary by region. Please check with the
Nokia dealer nearest to you.
This device may contain commodities, technology or software subject to export
laws and regulations from the US and other countries. Diversion contrary to law is
prohibited.
FCC / INDUSTRY CANADA NOTICE
Your device may cause TV or radio interference (for example, when using a
telephone in close proximity to receiving equipment). The FCC or Industry Canada
can require you to stop using your telephone if such interference cannot be
eliminated. If you require assistance, contact your local service facility. This device
complies with part 15 of the FCC rules. Operation is subject to the condition that
this device does not cause harmful interference.
ISSUE 1 EN, 9237522
R1114_en.book Page 2 Tuesday, January 24, 2006 2:04 PM
FCC DRAFT
Contents
3
Contents
For your safety...........................................6
Your Nokia N71.........................................9
Settings .................................................................................... 9
Transfer content.....................................................................9
Essential indicators.............................................................10
Keypad lock (keyguard)......................................................11
Volume and loudspeaker control ....................................11
Clock........................................................................................11
Memory card tool................................................................12
File manager .........................................................................13
Useful shortcuts...................................................................14
Multimedia key ....................................................................15
Help .........................................................................................15
Tutorial ...................................................................................15
Camera..................................................... 16
Camera display.....................................................................16
Take pictures.........................................................................16
Edit images............................................................................20
Tips on taking good photographs ...................................20
Video recorder display........................................................21
Record videos........................................................................21
Gallery.......................................................25
View images and video clips............................................26
Edit video clips.....................................................................26
Slide show.............................................................................28
Presentations........................................................................28
Albums ...................................................................................29
Image print ...........................................................................29
Media applications ..................................31
RealPlayer..............................................................................31
Movie director......................................................................33
Messaging.................................................35
Write text..............................................................................36
Write and send messages .................................................37
Inbox—receive messages...................................................39
Mailbox ..................................................................................41
View messages on a SIM card.........................................43
Messaging settings.............................................................43
Make calls ................................................48
Voice calls .............................................................................48
Answer or reject a call.......................................................50
R1114_en.book Page 3 Tuesday, January 24, 2006 2:04 PM
FCC DRAFT
Contents
4
Log........................................................................................... 51
Contacts (phonebook).............................54
Save names and numbers................................................. 54
Copy contacts ...................................................................... 55
Add ringing tones for contacts....................................... 56
Create contact groups....................................................... 56
Services.....................................................57
Services access point ......................................................... 57
Bookmarks view................................................................... 57
Connection security ...........................................................58
Browse.................................................................................... 58
Download and purchase items........................................ 59
End a connection ................................................................ 59
Services settings.................................................................. 60
Calendar....................................................61
Create calendar entries ..................................................... 61
Meeting requests ................................................................ 61
Calendar views.....................................................................62
Manage your calendar entries ........................................ 62
Calendar settings ................................................................ 62
My own.....................................................63
Music player ......................................................................... 63
Visual Radio (network service)........................................ 64
Instant messaging (network service)............................. 66
Games..................................................................................... 69
Connectivity .............................................70
Bluetooth connectivity...................................................... 70
Infrared connection............................................................73
Data cable .............................................................................74
PC connections ....................................................................74
Connection manager..........................................................74
Synchronization................................................................... 75
Device manager...................................................................75
Office........................................................77
Calculator.............................................................................. 77
Converter............................................................................... 77
Notes ...................................................................................... 77
Recorder................................................................................. 78
Personalize your device...........................79
Profiles—set tones...............................................................79
Change the look of your device ...................................... 80
Active standby mode.......................................................... 81
Tools..........................................................82
Settings Wizard ..................................................................82
Settings.................................................................................. 83
Voice commands ................................................................. 92
R1114_en.book Page 4 Tuesday, January 24, 2006 2:04 PM
FCC DRAFT
Contents
5
Application manager ..........................................................93
Activation keys.....................................................................95
Troubleshooting ...................................... 96
Q&A.........................................................................................96
Battery information................................ 99
Charging and discharging.................................................99
Nokia battery authentication guidelines......................99
Care and maintenance ......................... 101
Additional safety information............. 102
R1114_en.book Page 5 Tuesday, January 24, 2006 2:04 PM
6
FCC DRAFT
For your safety
Read these simple guidelines. Not following them may be
dangerous or illegal. Read the complete user guide for
further information.
SWITCH ON SAFELY Do not switch the
device on when wireless phone use is
prohibited or when it may cause interference
or danger.
ROAD SAFETY COMES FIRST Obey all local
laws. Always keep your hands free to operate
the vehicle while driving. Your first
consideration while driving should be road
safety.
INTERFERENCE All wireless devices may be
susceptible to interference, which could affect
performance.
SWITCH OFF IN HOSPITALS Follow any
restrictions. Switch the device off near
medical equipment.
SWITCH OFF IN AIRCRAFT Follow any
restrictions. Wireless devices can cause
interference in aircraft.
SWITCH OFF WHEN REFUELLING Do not use
the device at a refuelling point. Do not use near
fuel or chemicals.
SWITCH OFF NEAR BLASTING Follow any
restrictions. Do not use the device where
blasting is in progress.
USE SENSIBLY Use only in the normal
position as explained in the product
documentation. Do not touch the antenna
unnecessarily.
QUALIFIED SERVICE Only qualified personnel
may install or repair this product.
ENHANCEMENTS AND BATTERIES Use only
approved enhancements and batteries. Do not
connect incompatible products.
WATER-RESISTANCE Your device is not
water-resistant. Keep it dry.
BACK-UP COPIES Remember to make
back-up copies or keep a written record of all
important information stored in your device.
R1114_en.book Page 6 Tuesday, January 24, 2006 2:04 PM
7
FCC DRAFT
CONNECTING TO OTHER DEVICES When
connecting to any other device, read its user
guide for detailed safety instructions. Do not
connect incompatible products.
EMERGENCY CALLS Ensure the phone
function of the device is switched on and in
service. The keypad is active only in the fold
open mode. Press as many times as
needed to clear the display and return to the
start screen. Enter the emergency number,
then press . Give your location. Do not end
the call until given permission to do so.
About your device
The wireless device described in this guide is approved for
use on the EGSM 900,1800, and 1900 networks. Contact
your service provider for more information about networks.
When using the features in this device, obey all laws and
respect privacy and legitimate rights of others.
When taking and using images or video clips, obey all laws
and respect local customs as well as privacy and legitimate
rights of others.
Warning: To use any features in this device, other
than the alarm clock, the device must be switched on.
Do not switch the device on when wireless device use
may cause interference or danger.
Network services
To use the phone you must have service from a wireless
service provider. Many of the features in this device
depend on features in the wireless network to function.
These network services may not be available on all
networks or you may have to make specific arrangements
with your service provider before you can utilize network
services. Your service provider may need to give you
additional instructions for their use and explain what
charges will apply. Some networks may have limitations
that affect how you can use network services. For
instance, some networks may not support all
language-dependent characters and services. Network
features are designated in this guide by (network service).
Your service provider may have requested that certain
features be disabled or not activated in your device. If so,
they will not appear on your device menu. Your device may
also have been specially configured. This configuration
may include changes in menu names, menu order and
icons. Contact your service provider for more information.
This device supports WAP 2.0 protocols (HTTP and SSL)
that run on TCP/IP protocols. Some features of this device,
such as MMS, browsing, e-mail and content downloading
R1114_en.book Page 7 Tuesday, January 24, 2006 2:04 PM
8
FCC DRAFT
using the browser or over MMS, require network support
for these technologies.
For availability and information on using SIM card
services, contact your SIM card vendor. This may be the
service provider, network operator, or other vendor.
Enhancements, batteries, and
chargers
Always switch the device off and disconnect the charger
before removing the battery.
Check the model number of any charger before use with
this device. This device is intended for use when supplied
with power from a DC-4, AC-3 and AC-4 charger, and
from an AC-1, ACP-7, ACP-8, ACP-9, ACP-12, LCH-8,
LCH-9, or LCH-12 charger when used with the charger
adapter CA-44 delivered with your device.
The battery intended for use with this device is BL-5C.
Warning: Use only batteries, chargers, and
enhancements approved by Nokia for use with this
particular model. The use of any other types may
invalidate any approval or warranty, and may be
dangerous.
For availability of approved enhancements, please check
with your dealer. When you disconnect the power cord of
any enhancement, grasp and pull the plug, not the cord.
R1114_en.book Page 8 Tuesday, January 24, 2006 2:04 PM
Your Nokia N71
9
FCC DRAFT
Your Nokia N71
Model number: Nokia N71
Hereinafter referred to as Nokia N71.
Settings
Your Nokia N71 normally has MMS, GPRS, streaming, and
mobile Internet settings automatically configured, based
upon your service provider or network operator
information. You may have settings from your service
providers already installed in your device, or you may
receive the settings from the service providers as a special
text message.
Transfer content
You can copy content such as contacts and calendar
entries from a compatible Nokia device to your Nokia N71
using Bluetooth connectivity or infrared. The type of
content that can be copied depends on the device model.
Copyright protections may prevent some images, music
(including ringing tones), and other content from being
copied, modified, transferred or forwarded.
You can insert your SIM card in the other device. When
Nokia N71 is switched on without a SIM card, the offline
profile is automatically activated.
To avoid duplicate entries, you can transfer the same type
of information (for example, contacts) from the other
device to your Nokia N71 only once.
Transfer content
1Press , and select Tools > Transfer > Copy data on
your Nokia N71.
2In the information view, select Continue.
3Select whether you want to use Bluetooth connectivity
or infrared to transfer the data. Both devices must
support the selected connection type.
4If you select Bluetooth connectivity to search for
devices, select Continue. The visibility of the other
device must be on. Select your other device from the
list. You are asked to enter a code on your Nokia N71.
Enter a code (1–16 digits), and select OK. Enter the
same code on the other device, and select OK. The
devices are now paired. See ‘Pair devices’, p. 72.
For some device models, the Transfer application is
sent to the other device as a message. To install
Transfer on the other device, open the message, and
follow the instructions on the display.
R1114_en.book Page 9 Tuesday, January 24, 2006 2:04 PM
Your Nokia N71
10
FCC DRAFT
If you select infrared, connect the two devices. See
‘Infrared connection’, p. 73.
5From your Nokia N71, select the content you want to
copy from the other device.
Content is copied from the memory and compatible
memory card (if inserted) of the other device to the
corresponding location in your Nokia N71 and compatible
memory card (if inserted). Copying time depends on the
amount of data to be transferred. You can cancel copying
and continue later.
Essential indicators
The device is being used in a GSM network.
You have one or more unread messages in the Inbox
folder in Messaging.
You have received new e-mail in the remote mailbox.
There are messages waiting to be sent in the Outbox
folder.
You have missed calls.
Shown if Ringing type is set to Silent and Message
alert tone, IM alert tone, and E-mail alert tone are set
to Off.
The device keypad is locked.
A clock alarm is active.
The second phone line is being used (network service).
All calls to the device are diverted to another
number. If you have two phone lines (network service), the
indicator for the first line is and for the second
.
A headset is connected to the device.
The connection to a headset with Bluetooth
connectivity has been lost.
A loopset is connected to the device.
A TTY is connected to the device.
A data call is active.
A GPRS or EDGE packet data connection is available.
A GPRS or EDGE packet data connection is active.
A GPRS or EDGE packet data connection is on hold.
Bluetooth connectivity is on.
Data is being transmitted using Bluetooth
connectivity.
A USB connection is active.
An infrared connection is active. If the indicator is
blinking, the device is trying to connect to the other device
or the connection has been lost.
R1114_en.book Page 10 Tuesday, January 24, 2006 2:04 PM
Your Nokia N71
11
FCC DRAFT
Keypad lock (keyguard)
Use the keypad lock to prevent the keys from being
accidentally pressed.
To lock, in standby mode, press , then . When the
keys are locked, is shown on the display.
To unlock in fold open mode, press , then .
To lock the keypad, in fold open mode press the power key,
and select Lock keypad.
To lock the keypad, in fold closed mode press the power key
twice to select Lock keypad, and press the cover key.
When the keypad lock is on, calls may be possible to the
official emergency number programmed into your device.
To turn on the display light when the keypad lock is on,
press the power key.
Volume and loudspeaker control
To increase or decrease the
volume level when you have
an active call or are listening
to a sound, press or .
The built-in loudspeaker allows you to speak and listen
from a short distance without having to hold the device to
your ear.
Warning: Do not hold the device near your ear
when the loudspeaker is in use, because the volume
may be extremely loud.
To use the loudspeaker during a call, select Options >
Activate loudsp..
To turn off the loudspeaker, select Options > Activate
handset.
Clock
Tip! To view the time and date in fold closed mode,
press and hold the cover key.
Press , and select Clock. To set a new alarm, select
Options > Set alarm. When an alarm is active, is
shown.
To turn off the alarm, select Stop, or to stop the alarm for
5 minutes, select Snooze.
If the alarm time is reached while the device is switched
off, the device switches itself on and starts sounding the
alarm tone. If you select Stop, the device asks whether you
want to activate the device for calls. Select No to switch
off the device or Yes to make and receive calls. Do not
select Yes when wireless phone use may cause
interference or danger.
R1114_en.book Page 11 Tuesday, January 24, 2006 2:04 PM
Your Nokia N71
12
FCC DRAFT
To cancel an alarm, select Clock > Options > Remove
alarm.
Clock settings
To change the clock settings, select Clock > Options >
Settings.
To change the time or date, select Time or Date.
To change the clock shown in the standby mode, select
Clock type > Analog or Digital.
To allow the mobile phone network to update the time,
date, and time zone information to your device (network
service), select Auto time update > On.
To change the alarm tone, select Clock alarm tone.
World clock
To open the world clock view, open Clock, and press .
In the world clock view, you can view the time in different
cities.
To add cities to the list, select Options > Add city. You
can add a maximum of 15 cities to the list.
To set your current city, scroll to a city, and select
Options > My current city. The city is displayed in the
clock main view, and the time in your device is changed
according to the city selected. Check that the time is
correct and matches your time zone.
Memory card tool
Press , and select Tools > Memory. You can use a
compatible memory card as extra storage space and for
backing up the information in the device memory.
To back up information from the device memory to a
memory card, select Options > Backup phone mem.
To restore information from the memory card to the device
memory, select Options > Restore from card.
Format a memory card
When a memory card is reformatted, all data on the card
is permanently lost.
Some memory cards are supplied preformatted and others
require formatting. Consult your retailer to find out if you
must format the memory card before you can use it.
To format a memory card, select Options > Format mem.
card. Select Yes to confirm.
R1114_en.book Page 12 Tuesday, January 24, 2006 2:04 PM
Your Nokia N71
13
FCC DRAFT
Eject the memory card
1Before you eject the card, press
the power key, and select
Remove mem. card. All
applications are closed.
2When Remove memory card
and press 'OK' is displayed,
open the door of the memory
card slot.
3Press and release the memory card to eject it from the
slot.
4Remove the memory card, close the door, and select
OK.
Important: Do not remove the memory card in the
middle of an operation when the card is being accessed.
Removing the card in the middle of an operation may
damage the memory card as well as the device, and data
stored on the card may be corrupted.
File manager
Many features of the device, such as contacts, messages,
images, videos, ringing tones, calendar notes, documents,
and downloaded applications, use memory to store data.
The free memory available depends on how much data is
already saved in the device memory.
You can use a compatible memory card as extra storage
space. Memory cards are rewritable, so you can delete old
information and save new data on a memory card.
To browse files and folders in the device memory or on a
memory card (if inserted), press , and select Tools > File
mgr.. The device memory view ( ) opens. Press to
open the memory card view ( ) (if available).
To move or copy files to a folder, press and at the
same time to mark a file, and select Options > Move to
folder or Copy to folder.
To find a file, select Options > Find and the memory from
which to search, and enter a search text that matches the
file name.
View memory consumption
To view what types of data you have in the device and how
much memory the different data types consume, select
Options > Memory details. The amount of available free
memory is shown in Free memory.
Memory low—free memory
The device notifies you if the device or the memory card
memory is low.
R1114_en.book Page 13 Tuesday, January 24, 2006 2:04 PM
Your Nokia N71
14
FCC DRAFT
To free device memory, transfer data to a compatible
memory card, if you have one. Mark files to be moved, and
select Move to folder > Memory card and a folder.
You can also transfer media files to a compatible PC, for
example, using the transfer option in Gallery. See
‘Gallery’, p. 25.
Tip! You can use Nokia Phone Browser available in
Nokia PC Suite to view the different memories in your
device and transfer data.
To remove data to free memory, use File mgr., or go to the
respective application. For example, you can remove the
following:
• Messages from Inbox, Drafts, and Sent folders in
Messaging
• Retrieved e-mail messages from the device memory
• Saved Web pages
• Saved images, videos, or sound files
• Contact information
•Calendar notes
• Downloaded applications. See also ‘Application
manager’, p. 93.
• Any other data that you no longer need
Useful shortcuts
Use shortcuts to quickly get the most from your device.
Refer to the relevant sections in this user guide for further
details of the functions.
Standby mode
• To switch between applications that are open, press
and hold , and select an application. If memory is
low, the device may close some applications. The device
saves any unsaved data before closing an application.
Leaving applications running in the background
increases the demand on battery power and reduces
the battery life.
• To start the camera, press .
• To call your voice mailbox (network service), press and
hold .
• To open multimedia applications, press or press and
hold . See ‘Multimedia key’, p. 15.
• To change the profile, press , and select a profile.
• If you have two phone lines (network service), press
to switch between the two lines.
• To open the last dialed numbers list, press .
• To use voice commands, press and hold .
• To start a connection to Services, press and hold .
See ‘Services’, p. 57.
For further shortcuts available in the standby mode, see
‘Active standby mode’, p. 81.
R1114_en.book Page 14 Tuesday, January 24, 2006 2:04 PM
Your Nokia N71
15
FCC DRAFT
Edit text and lists
• To mark an item in a list, scroll to it, and press and
at the same time.
• To mark multiple items in a list, press and hold
while you press or . To end the selection, release
or , then release .
• To select letters and words, press and hold . At the
same time, press or to highlight text.
• To copy the text to clipboard, while still holding ,
select Copy.
• To insert the text into a document, press and hold ,
and select Paste.
Multimedia key
To open the shortcut assigned to the multimedia key, press
and hold . To open a list of multimedia applications,
press . To open the desired application, press , ,
or . To exit the list without selecting an application,
press .
To change the shortcuts, press , and press . To
change the applications that are shown when you press
, select Top, Left, Middle, and Right and the
application.
Some shortcuts may be fixed, and you are not able to
change them.
Help
Your device has context-sensitive help. When an
application is open, select Options > Help to access help
for the current view.
When you are reading the instructions, to switch between
help and the application that is open in the background,
press and hold .
To open help from the main menu, select Tools > Help.
Select the desired application to view its help topics.
Tutorial
The tutorial gives you information about some of the
features of your device. To access the tutorial in the menu,
press , and select My own > Tutorial and the section
you want to view.
R1114_en.book Page 15 Tuesday, January 24, 2006 2:04 PM
Camera
16
FCC DRAFT
Camera
Your Nokia N71 has
To activate the camera, open the cover, press , and
select Camera. In the viewfinder, you can see the view to
be captured.
The images and video clips are automatically saved in the
Gallery. The camera produce .jpg images. Video clips are
recorded in the 3gpp file format with the .3gp file
extension or in the .mp4 file format (high video quality
mode). See ‘Video settings’, p. 23.
You can send images in a multimedia message as an
e-mail attachment, or by using Bluetooth connectivity.
Tip! You can insert an image into a contact card. See
‘Save names and numbers’, p. 54.
Your Nokia N71 supports an image capture resolution of
up to 1600x1200 pixels using the camera. The image
resolution in these materials may appear different.
Camera display
Camera indicators show the following:
• The device memory ( ) and memory card ( )
indicators (1) show where images are saved.
• The images indicator (2) estimates how many images,
depending on the selected image quality, can fit in the
remaining memory of your device or the memory card.
• The shooting mode indicator (3) shows the active
shooting mode. See ‘Shooting mode’, p. 17.
•The flash indicator (4)
shows if the flash is set to
Automatic (), On (),
or Off ().
• The self-timer indicator
(5) shows that the
self-timer is activated. See
‘You in the picture—self-
timer’, p. 19.
• The sequence mode
indicator (6) shows that
the sequence mode is
active. See ‘Take time-lapse pictures’, p. 18.
Take pictures
If the camera is in video mode, open the image mode by
selecting Options > Image mode.
Graphic: Screenshot to
show position of the
indicators (to be
numbered).
R1114_en.book Page 16 Tuesday, January 24, 2006 2:04 PM
Camera
17
FCC DRAFT
To zoom in and out, press or . The zoom indicator,
which is displayed on the side of the viewfinder, shows the
zoom level. The quality (resolution) of a zoomed picture is
lower than that of a nonzoomed picture.
To take a picture, press . Do not move the device before
the image is saved. The image is saved automatically in the
Images & Video folder of Gallery. See ‘Gallery’, p. 25.
Saving the captured image may take longer if you change
the zoom, lighting, or color settings.
To select the shooting mode; flash, colour and lighting
settings; or view the Last image before taking a picture,
see ‘Camera setup’, p. 17.
After the image is taken, do any of the following:
• If you do not want to keep the image, select Options >
Delete, or press .
• To send the image Via multimedia, Via e-mail, or Via
Bluetooth, select Options > Send. For more
information, see ‘Messaging’, p. 35 and ‘Bluetooth
connectivity’, p. 70. This option is not available during
an active call.
• To edit the picture, select Options > Edit. See ‘Edit
images’, p. 20.
• To print the picture, select Options > Print. See ‘Image
print’, p. 29.
The camera goes into battery saving mode if you do not
make any key presses for a while. To continue taking
pictures, press
Camera setup
If the viewfinder is active, press or , or select
Options > Open setup.
Press or to choose
the item to be viewed or
adjusted, and press . The
settings available depend on
which camera is in use.
To reactivate the viewfinder,
press Cancel or .
The settings return to the default settings when you close
the Camera.
Shooting mode
The settings of each shooting mode have been set to
match a certain style or environment.
Graphic: Screenshot to
indicate the setup (lower)
part of the screen being
active.
R1114_en.book Page 17 Tuesday, January 24, 2006 2:04 PM
Camera
18
FCC DRAFT
The following shooting
modes are available:
Automatic, User defined,
Portrait, Landscape, Night,
and Sports.
Scroll to the appropriate
shooting mode for taking a
picture, and press .
When taking pictures, the
default shooting mode is
Automatic.
To make your own shooting mode suitable for a certain
environment, select User defined scene. In the user
defined scene you can adjust Based on mode, Flash,
White balance, and Colour tone, and Reset user scene
options. To copy the settings of another scene, select
Based on mode and the desired scene.
If you select the User defined shooting mode, it is set as
the default shooting mode.
Flash
The camera has an LED flashlight for low light conditions.
Keep a safe distance when using the flash. Do not use the
flash on people or animals at close range. Do not cover
the flash while taking a picture.
The following flash modes are available: Automatic, On,
and Off.
Scroll to the desired flash setting and press .
If the flash is set to Off or Automatic during bright
conditions, the flash still emits a low light when an image
is captured. This allows the subject of the picture to see
when the picture is taken. There is no flash effect on the
resultant picture.
White balance
Select the appropriate setting that matches the current
lighting conditions. This allows the camera to reproduce
colors more accurately.
Scroll to the desired setting and press .
Colour tone
Scroll to the desired color effect setting and press .
Last image
To view the last image taken, press .
Take time-lapse pictures
Select Options > Advance sequence to set the camera to
take several pictures in a sequence automatically. You can
set the rate between two frames per second (fast) and one
Graphic: Screenshot to
show landscape scene??
See Gromit.
R1114_en.book Page 18 Tuesday, January 24, 2006 2:04 PM
Camera
19
FCC DRAFT
frame every 15 minutes (slow). The number of pictures is
limited by the amount of memory available.
The pictures are automatically saved in Gallery.
You can also use the
sequence mode with the
Self-timer. See ‘You in the
picture—self-timer’, p. 19.
After taking the pictures, they
are shown in a grid on the
main display. To view a
picture, press to open it.
To return to the sequence
mode viewfinder, select Back.
You in the picture—self-timer
Use the self-timer to delay the taking of a picture so that
you can include yourself in the picture. To set the
self-timer delay, select Options > Self-timer > 10
seconds, 20 seconds or 30 seconds. To activate the
self-timer, select Activate. The self-timer indicator ( )
blinks and the device beeps when the timer is running. The
camera takes the picture after the selected delay has
elapsed. You can also use the Self-timer in the sequence
mode. See ‘Take time-lapse pictures’, p. 18.
Camera settings
To change the main camera settings, select Options >
Settings, and from the following:
Image quality—High 2M - Print (1600x1200 resolution),
Med 0.8M - Email (800x600 resolution) or Low 0.3M -
Multimedia (640x480 resolution). The better the image
quality, the more memory the image uses.
Add to album—Select whether you want to save the
image to a certain album in Gallery. If you select Yes, a list
of available albums opens.
Extended zoom—Select On if you want to achieve
maximum zoom but are prepared to accept a reduction in
image resolution, which may be lower than you have
selected with the Image quality setting. If you want to
limit the zoom range and have less reduction in resolution,
select Off.
Show captured image—Select On to see the captured
image after it is taken, or Off to continue taking pictures
immediately.
Capture tone—Select the tone you want to hear when you
take a picture.
Memory in use—Select where to store your images.
Graphic: Screenshot to
show a grid of pictures in
Gallery.
R1114_en.book Page 19 Tuesday, January 24, 2006 2:04 PM
Camera
20
FCC DRAFT
Edit images
To edit the picture you have just taken, select Options >
Edit. To edit other pictures, select them from Gallery.
Select Options > Apply effect to crop and rotate the
image; adjust the color, compression, and resolution; also,
to add effects, text, clip art, or a frame to the picture.
To manually crop an image, select Options > Apply
effect > Crop > Manual. A rectangle indicating the crop
area is displayed. Scroll to define the top left starting
point for the crop, and select Set. Scroll to the bottom
right of the area to be cropped, and select Crop.
To reduce redness of the eyes in an image, select
Options > Apply effect > Red eye reduction. Move the
cross onto the eye, and press . A loop appears on the
display. Scroll to resize the loop to fit the size of the eye.
Press to reduce the redness.
To add clip art to an image, select Options > Apply
effect > Clip art. Select the item you want to add from
the list, and press . To move, rotate, and change the
size of the item, select Options > Move, Resize, or Rotate.
To add text to an image, select Options > Apply effect >
Text. Enter the text, and select OK. To edit the text, select
Options > Move, Resize, Rotate, or Colour.
Shortcuts in the image editor:
• To view an image in full screen, press . To return to
the normal view, press again.
• To rotate an image clockwise or counterclockwise,
press. and .
• To zoom in or zoom out, press and .
Tips on taking good photographs
Picture quality
Use the appropriate picture quality. The camera has
three picture quality settings. Use High 2M - Print for
large prints up to 25x20 centimeters (10x8 inches), Med
0.8M - Email for e-mail and prints up to 15x10
centimeters (6x4 inches), or Low 0.3M - Multimedia for
use in a multimedia message. The better the image quality,
the more memory the image consumes. The quality of a
zoomed picture is lower than that of a nonzoomed picture.
To change the picture quality, select Options > Settings..
Background
Use a simple background—For portraits and other pictures
with people, avoid having your subject in front of a
cluttered, complex background that may distract attention
from the subject. Move the camera or the subject when
these conditions cannot be met. Move the camera closer to
the object to take clearer portraits.
R1114_en.book Page 20 Tuesday, January 24, 2006 2:04 PM
Camera
21
FCC DRAFT
Depth
When taking pictures of landscapes, add depth to your
pictures by placing objects in the foreground. However, if
the foreground object is too close to the camera, it may be
blurred.
Lighting conditions
Changing the source, amount, and direction of light can
change photographs dramatically. Here are some typical
lighting conditions:
• Light source behind the subject—Avoid placing your
subject in front of a strong light source. If the light
source is behind the subject or visible in the display, the
resulting picture may have weak contrast, may be too
dark, and may contain unwanted lighting effects. You
can use the flash to add more lighting to shadows. See
‘Flash’, p. 18.
• Sidelit subject—Strong side light gives a dramatic
effect but may be too harsh, resulting in too much
contrast.
• Light source in front of the subject—Harsh sunlight may
cause the subjects to squint their eyes. The contrast
may also be too high.
• Optimal lighting—Found in situations where there is
plenty of diffused, soft light available; for example, on
a bright, partially cloudy day or on a sunny day in the
shadow of trees.
Video recorder display
Video recorder indicators
show the following:.
• The device memory
( ) and memory
card ( ) indicators
(1) show where the
video is saved.
• The current video
length indicator (2)
shows elapsed time
and time remaining.
• The shooting mode indicator (3) shows the current
shooting mode. See ‘Shooting mode’, p. 17.
• The microphone indicator (4) shows that the
microphone is muted.
• The file format indicator (5) indicates the format of the
video clip.
Record videos
If the camera is in image mode, to select video mode,
select Options > Video mode.
R1114_en.book Page 21 Tuesday, January 24, 2006 2:04 PM
Camera
22
FCC DRAFT
The zoom indicator, which appears on the side pane,
shows the zoom level. Press or to zoom in or zoom
out.
1Press to start recording. The record icon is
shown. The LED flash is lit, and a tone sounds,
indicating to the subject that video is being recorded.
There is no flash effect on the resultant video.
2To pause recording at any time, select Pause. The
pause icon blinks on the display. Video recording
automatically stops if recording is set to pause and
there are no key presses within a minute.
3Select Continue to resume recording.
4Select Stop to stop recording. The video clip is
automatically saved to the Images&Video folder of
Gallery. See ‘Gallery’, p. 16.
To select the shooting mode; colour and lighting settings;
or view the Last video clip before recording a video, see
‘Video recorder setup’, p. 22.
After a video clip is recorded, do the following:
• To immediately play the video clip you just recorded,
select Options > Play.
• If you do not want to keep the video, select Options >
Delete.
• To return to the viewfinder to record a new video,
press .
• To send the video Via multimedia, Via e-mail, or Via
Bluetooth, select Options > Send. For more
information, see ‘Messaging’, p. 35 and ‘Bluetooth
connectivity’, p. 70. This option is not available during
an active call.
• To edit the video, select Options > Edit. See also ‘Edit
video clips’, p. 26.
Video recorder setup
If the viewfinder is active, press or , or select
Options > Open setup.
Press or to choose
the item to be viewed or
adjusted, and press . The
settings available depend on
which camera is in use.
To reactivate the viewfinder,
press Cancel or .
The settings return to the default settings when you close
the Camera.
Shooting mode
The settings of each shooting mode have been set to match
a certain style or environment.
Graphic: Screenshot to
indicate the setup (lower)
part of the screen being
active.
R1114_en.book Page 22 Tuesday, January 24, 2006 2:04 PM
Camera
23
FCC DRAFT
The following shooting
modes are available:
Automatic, or Night.
Scroll to the appropriate
shooting mode for recording
a video, and press .
White balance
Select the appropriate setting
that matches the current
lighting conditions. This
allows the camera to reproduce colors more accurately.
Scroll to the desired setting and press .
Color tone
Scroll to the desired color effect setting and press .
Last video
To view the last video taken, press .
Video settings
There are two kinds of settings for the video recorder: video
setup settings and main settings. To adjust video setup
settings, see ‘White balance’, p. 18. The setup settings
return to the default settings after you close the camera,
but the main settings remain the same until you change
them again. To change the main settings, select Options
> Settings and from the following:
Audio recording—Select On if you want to record both
image and sound.
Video quality—Set the quality of the video clip to High,
Normal. If you select High or Normal, the length of the
video recording is restricted by the available space on your
memory card, and up to one hour per clip. If you want to
view the video on a compatible TV or PC, select High video
quality, which has CIF resolution (352x288) and file
format .mp4. You cannot send video clips saved in the
.mp4 format in a multimedia message. If you want to view
the clip in compatible mobile devices, select Normal,
which has QCIF resolution (176x144) and file format .3gp.
To send the video clip through MMS. The video clip is
limited to 300 KB (approximately 20 seconds in duration)
so that it can be conveniently sent as a multimedia
message to a compatible device. Some networks, however,
may only support sending of multimedia messages with a
maximum size of 100 KB. Contact your service provider for
more information.
Add to album—Select Yes to save the recorded video clip
to a particular album in Gallery.
Show captured video—Select Off to record a video clip
immediately after another. Your videos are not played
Graphic: Screenshot to
show landscape scene??
See Gromit.
R1114_en.book Page 23 Tuesday, January 24, 2006 2:04 PM
Camera
24
FCC DRAFT
after being recorded, and the video recorder is ready for
use again.
Default video name—Select Date or Text as the default
name for videos you record.
Memory in use—Choose the default memory store:
device memory or memory card.
R1114_en.book Page 24 Tuesday, January 24, 2006 2:04 PM
Gallery
25
FCC DRAFT
Gallery
To store and organize your images, video clips, sound clips,
playlists, and streaming links, press , and select Gallery.
To open the gallery from the Camera application, select
Options > Go to Gallery. From Camera, only the Images
& video folder is available.
Tip! To switch from Gallery to Camera, select
Options > Go to Camera from the Images & video folder.
Select Images & video,
Tracks, Sound clips, Links,
Presentations, or All files,
and press .
You can browse and open
folders, mark, copy, and
move items to folders and
albums. Real audio clips,
video clips, .ram files, and
streaming links are opened
and played in the RealPlayer
application. See ‘RealPlayer’, p. 31. You can also create
albums; and mark, copy, and add items to albums. See
‘Albums’, p. 29.
Tip! You can transfer images from your device to a
compatible PC with Nokia Phone Browser available in
Nokia PC Suite. See the CD-ROM supplied with your
device.
Press to open a file. Videos and Real audio clips open
in RealPlayer, and music opens in the music player. See
‘View images and video clips’, p. 26. See ‘Music player’, p.
63.
To copy or move files to a compatible memory card or to
device memory select a file and Options > Organise >
Copy to memory card, Move to memory card, Copy to
phone mem., or Move to phone mem..
Files stored on the memory card are indicated with .
Files stored in the device memory are indicated with .
To reduce the size of files that you have already copied to
other locations (for example, a compatible PC) and
increase free memory space, in the Images & video folder,
select a file and Options > Free memory.
To download files into Gallery in one of the main folders
using the browser, select Graphic downls., Video
downlds., Track downlds., or Sound downlds.. The
browser opens, and you can select a bookmark from which
the site can download.
R1114_en.book Page 25 Tuesday, January 24, 2006 2:04 PM
Gallery
26
FCC DRAFT
View images and video clips
Pictures taken and video clips recorded with the camera
are stored in the Images & video folder in Gallery. Images
and video clips can also be sent to you in a multimedia
message, as an e-mail attachment, or using Bluetooth
connectivity. To be able to view a received image or video
clip in Gallery or in RealPlayer, you must save it in the
device memory or on a compatible memory card.
Open the Images & video folder in Gallery. The images
and video clip files are in a loop and ordered by date. To
browse individual files, press or . To browse files in
groups, press or .
To edit a photo or a video clip, select Options > Edit. An
image editor or a video editor opens.
To add an image or a video clip to an album in Gallery,
select Options > Albums. > Add to album. See ‘Albums’,
p. 29.
To create custom video clips, select a video clip or several
clips in Gallery, and select Options > Edit. See ‘Edit video
clips’, p. 26.
To print your images on a compatible printer connected to
your device or to store them on a compatible memory card
for printing, select Options > Print. See ‘Image print’, p.
29.
To zoom an opened image, select Options > Zoom in or
Zoom out. The zooming ratio is at the top of the display.
The zooming ratio is not stored permanently.
Edit video clips
You can edit video clips in Gallery. See ‘Gallery’, p.25.
To edit video clips and create custom video clips, scroll to
a video clip, and select Options > Edit. You can create
custom video clips by combining and trimming video clips,
and adding images, sound clips, transitions, and effects.
Transitions are visual effects that you can add to the
beginning and end of the video or between the video clips.
In the video editor you can see two timelines: video clip
timeline and sound clip timeline. If you add images, text,
or transitions to a video clip, they are shown on the video
clip timeline. To move on the timelines, press or . To
switch between the timelines, press or .
To create custom video clips, mark and select one or more
video clips, and select Options > Edit.
In the edit video view, you can insert video clips to make a
custom video clip, and edit the clips by trimming and
adding effects. You can add images and sound clips and
change their duration, and also add text and images to the
clip.
To modify the video, select from the following options:
R1114_en.book Page 26 Tuesday, January 24, 2006 2:04 PM
Gallery
27
FCC DRAFT
Edit video clip:
Cut—Trims the video clip in the cut video clip view.
Add colour effect—Inserts a color effect in the video clip.
Use slow motion—Slows the speed of the video clip.
Mute audio or Unmute audio—Mutes or unmutes the
original video clip sound.
Move—Moves the video clip to the selected location on the
timeline.
Remove—Removes the video clip from the video.
Duplicate—Makes a copy of the selected video clip.
Edit text (shown only if you have added text)—To move,
remove, or duplicate text; change the color and style of the
text; define how long it stays on the screen; and add
effects to the text.
Edit image (shown only if you have added an image)—To
move, remove, or duplicate an image; define how long it
stays on the screen; and set a background or a color effect
to the image.
Edit audio clip:
Cut—Trims the sound clip in the cut sound clip view.
Move—Moves the sound clip to the selected location on
the timeline.
Remove—Removes the sound clip from the video.
Duplicate—Makes a copy of
the selected sound clip.
Change duration—Changes
the length of the sound clip.
Edit transition—There are
three types of transitions: at
the start of a video, at the
end of a video, and
transitions between video
clips. A start transition can
be selected when the first transition of the video is active.
Insert:
Video clip—Inserts the selected video clip. A thumbnail of
the video clip is shown in the main view. A thumbnail
consists of the first non-black frame of the video clip. The
name and length of the selected video clip is also shown.
Image—Inserts the selected image. A thumbnail of the
image is shown in the main view.
Text—Inserts text to the video clip. You can insert a title,
subtitle, or credits.
Audio clip—Inserts the selected sound clip. The name and
length of the selected sound clip is shown in the main
view.
New audio clip—Records a new sound clip to the selected
location.
R1114_en.book Page 27 Tuesday, January 24, 2006 2:04 PM
Gallery
28
FCC DRAFT
Movie—To preview the movie in full screen or as a
thumbnail, save or send the movie, or cut the movie to a
suitable size for sending it in a multimedia message.
Tip! To take a snapshot of a video clip, select
Options > Take snapshot in the thumbnail preview
view or in the cut video view.
To save your video, select Options > Movie > Save. To
define the Memory in use, select Options > Settings. The
default is the device memory.
Tip! In the Settings view, you can define Default
video name, Default snapshot name, Save quality,
and Memory in use.
Select Send > Via multimedia, Via e-mail, Via
Bluetooth, or Via infrared if you want to send the video.
Contact your service provider for details of the maximum
multimedia message size that you can send. If your video
is too large to be sent in a multimedia message, is
displayed.
Tip! If you want to send a video clip that is over the
maximum multimedia message size allowed by your
service provider, you can send the clip using Bluetooth
connectivity. See ‘Send data’, p. 72. You can also transfer
your videos using Bluetooth connectivity to a compatible
PC, or by using a compatible memory card reader
(enhancement).
Slide show
To view images and video clips in the full screen mode,
select Options > Slide show > Start. Select from the
following:
Play—to open the RealPlayer application
Pause—to pause the slide show
Continue—to resume the slide show
End—to close the slide show
Press (faster) or (slower) to adjust the Tempo. Press
(previous) or (next) to browse the thumbnails.
To add sound to the slide show in the Images & Video
folder, select Options > Slide show > Music settings and
from the following:
Music—Select On, or Off
Track—Select a music file from the list
Volume—Press to decrease the volume or to
increase the volume
Presentations
With presentations, you can view SVG (scaleable vector
graphic) files. SVG images maintain their appearance when
printed or viewed with different screen sizes and
R1114_en.book Page 28 Tuesday, January 24, 2006 2:04 PM
Gallery
29
FCC DRAFT
resolutions. To view SVG files, select Presentations folder,
an image, and select Options > Play.
Albums
With albums you can conveniently manage your images
and video clips. To view the albums list, in the Images &
video folder, select Options > Albums > View albums. The
albums are ordered alphabetically. To view the content of
an album, press .
To create a new album, select Options > New album. Enter
a name for the album, and select OK.
To add a picture or a video clip to an album in Gallery,
scroll to a picture or video clip, and select Options >
Albums. > Add to album. A list of albums opens. Select the
album to which you want to add the picture or video clip,
and press .
To remove a file from an album, press . The file is not
deleted from the Images & video folder in Gallery.
Image print
To print your images using a compatible data cable,
Bluetooth connectivity, or your compatible memory card
(if available), select the image you want to print, and the
print option in Gallery, Camera, image editor, or image
viewer.
You can only print images that are in jpg format. The
pictures taken with the camera are automatically saved in
.jpg format.
Note: Connect the data cable to a PictBridge
compatible printer, and select Pictbridge from the
popup display on your device before you print.
Printer selection
When you print for the first time, a list of available
printers is displayed after you select the image. Select a
printer. The printer is set as the default printer.
If you have connected a PictBridge compatible printer
using the CA-53 cable, the printer is automatically
displayed.
If the default printer is not available, a list of available
printing devices is displayed.
To change the default printer, select Options > Settings >
Default printer.
Print preview
The print preview view opens only when you start printing
an image in the gallery.
R1114_en.book Page 29 Tuesday, January 24, 2006 2:04 PM
Gallery
30
FCC DRAFT
The selected images are displayed using predefined
layouts. To change the layout, scroll left and right through
the available layouts for the selected printer. If the images
do not fit on a single page, press or to display the
additional pages.
Print settings
The available options vary, depending on the capabilities
of the printing device you selected.
To set a default printer, select Options > Default printer.
To select the paper size, select Paper size, the size of
paper from the list, and OK. Select Cancel to return to the
previous view.
R1114_en.book Page 30 Tuesday, January 24, 2006 2:04 PM
Media applications
31
FCC DRAFT
Media applications
RealPlayer
Press , and select Imaging > RealPlayer. With
RealPlayer, you can play video clips, sound clips, and
playlists, or stream media files over the air. You can
activate a streaming link when you browse Web pages, or
store it in the device memory or a compatible memory card
(if inserted).
RealPlayer supports files with extensions such as .3gp,
.mp4 or .rm. However, RealPlayer does not necessarily
support all file formats or all the variations of file formats.
For example, RealPlayer attempts to open all .mp4 files,
but some .mp4 files may include content that is not
compliant with 3GPP standards and, therefore, is not
supported by your device.
Play video or sound clips
1To play a media file stored in device memory, or on a
compatible memory card (if inserted), select Options >
Open and from the following:
Most recent clips—to play one of the last six files
played in RealPlayer.
Saved clip—to play a file saved in Gallery.
See ‘Gallery’, p. 25.
2Scroll to a file, and press to play the file.
Tip! To view a video clip in full screen mode, press
. Press again to change back to normal screen mode.
Shortcuts during play:
• To fast forward, press and hold .
• To rewind through the media file, press and hold .
• To mute the sound, press and hold until is
displayed. To turn on the sound, press and hold
until you see .
Stream content over the air
Many service providers require you to use an Internet
access point (IAP) for your default access point. Other
service providers allow you to use a WAP access point.
The access points may be configured when you first start
your device.
Contact your service provider for more information.
Note: In RealPlayer, you can only open an rtsp://
URL address. However, RealPlayer recognizes an http
link to a .ram file.
R1114_en.book Page 31 Tuesday, January 24, 2006 2:04 PM
Media applications
32
FCC DRAFT
To stream content over the air, select a streaming link
saved in Gallery, on a Web page, or received in a text
message or multimedia message. Before live content
begins streaming, your device connects to the site and
starts loading the content. The content is not saved in
your device.
Receive RealPlayer settings
You may receive RealPlayer settings in a special text
message from the network operator or service provider.
See ‘Data and settings’, p. 40. For more information,
contact your network operator or service provider.
Change the RealPlayer settings
Select Options > Settings and from the following:
Video—to adjust the contrast of the video, and to have
RealPlayer automatically repeat video clips after they
finish playing
Connection—to select whether to use a proxy server,
change the default access point, and set the port range
used when connecting. Contact your service provider for
the correct settings.
Proxy settings:
Use proxy—To use a proxy server, select Yes
Proxy serv. address—Enter the IP address of the proxy
server
Proxy port number—Enter the port number of the proxy
server
Glossary: Proxy servers are intermediate servers between
media servers and their users. Some service providers
use them to provide additional security or speed up
access to browser pages that contain sound or video
clips.
Network settings:
Default access point—Scroll to the access point you want
to use to connect to the Internet, and press
Online time—Set the time for RealPlayer to disconnect
from the network when you pause a media clip playing
through a network link. Select User defined, and press .
Enter the time, and select OK.
Lowest UDP port—Enter the lowest port number of the
server’s port range. The minimum value is 1024.
Highest UDP port—Enter the highest port number of the
server’s port range. The maximum value is 65535.
Select Options > Advanced settings to edit the
bandwidth values for different networks.
R1114_en.book Page 32 Tuesday, January 24, 2006 2:04 PM
Media applications
33
FCC DRAFT
Movie director
To create muvees, press , and select Imaging > Movie.
Muvees are short, edited video clips that can contain video,
images, music, and text. Quick muvee is created
automatically by Movie director after you select the style
for the muvee. Movie director uses the default music and
text associated with the chosen style. In a Custom muvee
you can select your own video and music clips, images and
style, and add an opening and closing message. You can
send muvees with MMS.
Open Movie, and press or to move between the
and views. To return to the main view from the
view, select Done.
The view contains a list of video clips that you can
Play, Send, Rename, and Delete.
Create a quick muvee
1In the Movie director main view, select Quick muvee.
2Select a style for the muvee from the style list. The
created muvee is saved in the Movie director muvee
list. The muvee is played automatically after saving.
Create a custom muvee
1In the Movie Director main view, select Custom
muvee.
2Select the clips you want to include in your muvee in
Video, Image, Style, or Music.
After you select video clips and images, to define the
order in which the files are played in the muvee, select
Options > Advanced options. To select the file you
want to move, press . Then scroll to the file below
which you want to place the marked file, and press .
To cut the video clips, select Options > Select
contents. See ‘Select content’, p. 34.
In Message you can add an opening and closing text
to a muvee.
3Select Create muvee and from the following:
Multimedia message—to optimize the length of the
muvee for MMS sending
Auto-select—to include all the selected pictures and
video clips in the muvee
Same as music—to set the muvee duration to be the
same as the chosen music clip
User defined—to define the length of the muvee
4Select Options > Save.
To preview the custom muvee before saving it, in the
Preview muvee view, select Options > Play.
R1114_en.book Page 33 Tuesday, January 24, 2006 2:04 PM
Media applications
34
FCC DRAFT
To create a new custom muvee by using the same style
settings, select Options > Recreate.
Select content
To edit the selected video clips, select Options >
Advanced options > Options > Select contents. You can
select which parts of the video clip you want to include or
exclude in the muvee. In the slider, green is for included,
red is for excluded, and grey is for neutral parts.
To include a part of the video clip in the muvee, scroll to
the part, and select Options > Include. To exclude a part,
select Options > Exclude. To exclude a shot, select
Options > Exclude shot.
To let Movie director randomly include or exclude a part
or parts of the video clip, scroll to the part, and select
Options > Mark as neutral or Mark all as neutral.
Settings
Select Settings to edit the following options:
Memory in use—Select where to store your muvees.
Resolution—Select the resolution of your muvees.
Default muvee name—Set a default name for the
muvees.
R1114_en.book Page 34 Tuesday, January 24, 2006 2:04 PM
Messaging
35
FCC DRAFT
Messaging
Press , and select Messaging. In Messaging, you can
create, send, receive, view, edit, and organize text
messages, multimedia messages, e-mail messages, and
special text messages containing data. You can also
receive messages and data using Bluetooth connectivity or
infrared, receive Services messages, cell broadcast
messages, and send service commands.
To create a new message, select New message.
Note: Only devices that have compatible features
can receive and display multimedia messages. The
appearance of a message may vary depending on the
receiving device.
Messaging contains the following folders:
Inbox—Received messages, except e-mail and cell
broadcast messages, are stored here. E-mail messages are
stored in the Mailbox.
My folders—Organize your messages into folders.
Tip! To avoid rewriting messages that you send often,
use texts in the templates folder.
Mailbox—Connect to your remote mailbox to retrieve
your new e-mail messages or view your previously
retrieved e-mail messages offline. See ‘E-mail’, p. 45.
Drafts—Draft messages that have not been sent are
stored here.
Sent—The last 20 messages that have been sent,
excluding messages sent using Bluetooth connectivity or
infrared, are stored here. To change the number of
messages to be saved, see ‘Other settings’, p. 47.
Outbox—Messages waiting to be sent are temporarily
stored here.
Example: Messages are placed in the outbox, for
example, when your device is outside network
coverage. You can also schedule e-mail messages to be
sent the next time you connect to your remote
mailbox.
Reports (network service)—You can request the
network to send you a delivery report of the text messages
and multimedia messages you have sent. Receiving a
delivery report of a multimedia message that has been
sent to an e-mail address may not be possible.
Tip! When you have opened any of the default
folders, to switch between the folders, press or .
To enter and send service requests (also known as USSD
commands), such as activation commands for network
R1114_en.book Page 35 Tuesday, January 24, 2006 2:04 PM
Messaging
36
FCC DRAFT
services, to your service provider, select Options >
Service command in the Messaging main view.
Cell broadcast (network service) allows you to receive
messages on various topics, such as weather or traffic
conditions, from your service provider. For available topics
and relevant topic numbers, contact your service provider.
In the Messaging main view, select Options > Cell
broadcast. In the main view, you can see the status of a
topic, a topic number, name, and whether it has been
flagged ( ) for follow-up.
Write text
ABC, abc, and Abc indicate the selected character mode.
123 indicates the number mode.
Traditional text input
is displayed when you are writing text using
traditional text input.
• Press a number key ( — ) repeatedly until the
desired character appears. There are more characters
available for a number key than are printed on the key.
• If the next letter is located on the same key as the
present one, wait until the cursor appears (or press
to end the time-out period), and enter the letter.
• To insert a space, press . To move the cursor to the
next line, press three times.
Predictive text input
You can enter any letter with a single keypress. Predictive
text input is based on a built-in dictionary to which you
can add new words. is displayed when you write
text using predictive text input.
1To activate predictive text input, press , and select
Predictive text on. This activates predictive text input
for all editors in the device.
2To write the desired word,
press the keys — .
Press each key only once
for one letter. For
example, to write "Nokia"
when the English
dictionary is selected,
press for N, for o,
for k, for i, and
for a.
The word suggestion changes after each keypress.
3When you finish writing the word correctly, press
to confirm it, or press to add a space.
If the word is not correct, press repeatedly to view
the matching words the dictionary has found one by
R1114_en.book Page 36 Tuesday, January 24, 2006 2:04 PM
Messaging
37
FCC DRAFT
one, or press , and select Predictive text >
Matches.
If the ? character is shown after the word, the word is
not in the dictionary. To add a word to the dictionary,
select Spell, enter the word using traditional text input,
and select OK. The word is added to the dictionary.
When the dictionary is full, a new word replaces the
oldest added word.
4Start writing the next word.
Write compound words
Write the first half of a compound word; to confirm it,
press . Write the last part of the compound word. To
complete the compound word, press to add a space.
Turn predictive text input off
To turn predictive text input off for all editors in the device,
press , and select Predictive text > Off.
Tip! To turn predictive text input on or off, quickly
press twice.
Tips on text input
To insert a number in the letter mode, press and hold the
desired number key.
To switch between the letter and number mode, press and
hold .
To switch between the different character modes, press
.
To delete a character, press . To delete more than one
character, press and hold .
To access the most common punctuation marks, press
.
To open a list of special characters, press .
Tip! To insert several special characters at the same
time, press when you select each character.
Write and send messages
The appearance of a multimedia message may vary,
depending on the receiving device.
Before you can create a multimedia message or write an
e-mail, you must have the correct connection settings in
place. See ‘Receive MMS and e-mail settings’, p. 39 and
‘E-mail’, p. 45.
The wireless network may limit the size of MMS messages.
If the inserted picture exceeds this limit, the device may
make it smaller so that it can be sent by MMS.
1Select New message and one of the following:
Text message—to send a text message
Multimedia message—to send a multimedia message
(MMS)
R1114_en.book Page 37 Tuesday, January 24, 2006 2:04 PM
Messaging
38
FCC DRAFT
E-mail—to send an e-mail
If you have not set up your e-mail account, you are
prompted to do so. To start creating the e-mail
settings with the mailbox guide, select Start.
2In the To field, press
to select recipients or
groups from contacts, or
enter the recipient’s
phone number or e-mail
address. To add a
semicolon (;) that
separates the recipients,
press . You can also
copy and paste the
number or address from
the clipboard.
3In the Subject field, enter the subject of a multimedia
message or e-mail. To change the fields that are
visible, select Options > Address fields.
4In the message field, write the message. To insert a
template, select Options > Insert or Insert object >
Template.
5To add a media object to a multimedia message, select
Options > Insert object > Image, Sound clip, or
Video clip. When sound is added, is shown.
You cannot send video clips that are saved in the .mp4
format in a multimedia message. To change the format
in which recorded videos are saved, see ‘Video settings’,
p. 23.
6To take a new picture or record sound or video for a
multimedia message, select Insert new > Image,
Sound clip, or Video clip. To insert a new slide to the
message, select Slide.
To see what the multimedia message looks like, select
Options > Preview.
7To add an attachment to an e-mail, select Options >
Insert > Image, Sound clip, Video clip, or Note. E-mail
attachments are indicated by .
Tip! To send other file types as attachments, open
the appropriate application, and select Send > Via
e-mail, if available.
8To send the message, select Options > Send, or press
.
Your device supports the sending of text messages beyond
the character limit for a single message. Longer messages
are sent as a series of two or more messages. Your service
provider may charge accordingly. Characters that use
accents or other marks, and characters from some
language options like Chinese, take up more space limiting
the number of characters that can be sent in a single
message. In the navigation bar, you can see the message
length indicator counting backwards. For example, 10 (2)
means that you can still add 10 characters for the text to
be sent as two messages.
R1114_en.book Page 38 Tuesday, January 24, 2006 2:04 PM
Messaging
39
FCC DRAFT
E-mail messages are automatically placed in Outbox
before sending. If sending does not succeed, the e-mail is
left in the Outbox with the Failed status.
Tip! You can combine images, video, sound, and text
to a presentation and send it in a multimedia message.
Start to create a multimedia message, and select
Options > Create presentation. The option is shown
only if MMS creation mode is set to Guided or Free.
See ‘Multimedia messages’, p. 44.
Receive MMS and e-mail settings
You may receive the settings in a message from your
network operator or service provider. See ‘Data and
settings’, p. 40.
Enter the MMS settings manually:
1Press , select Tools > Settings > Connection >
Access points, and define the settings for a multimedia
messaging access point. See ‘Connection settings’,
p. 86.
2Press , and select Messaging > Options >
Settings > Multimedia message > Access point in
use and the access point you created as the preferred
connection. See also ‘Multimedia messages’, p. 44.
Before you can send, receive, retrieve, reply to, and forward
e-mail, you must do the following:
• Configure an Internet access point (IAP) correctly. See
‘Connection settings’, p. 86.
• Define your e-mail settings correctly. If you select
Mailbox in the Messaging main view and have not set
up your e-mail account, you are prompted to do so. To
start creating the e-mail settings with the mailbox
guide, select Start. See also ‘E-mail’, p. 45.
You must have a separate e-mail account. Follow the
instructions given by your remote mailbox and Internet
service provider (ISP).
Inbox—receive messages
In the Inbox folder, indicates an unread text
message, an unread multimedia message, data
received through infrared, and data received through
Bluetooth connectivity.
When you receive a message, and 1 new message
are shown in the standby mode. To open the message,
select Show. To open a message in Inbox, scroll to it, and
press .
To reply to a received message, select Options > Reply
To print a text or a multimedia message on a compatible
basic print profile (BPP) equipped printer with Bluetooth
R1114_en.book Page 39 Tuesday, January 24, 2006 2:04 PM
Messaging
40
FCC DRAFT
connectivity (such as HP Deskjet 450 Mobile Printer or HP
Photosmart 8150), select Options > Print.
Multimedia messages
Important: Exercise caution when opening
messages. Multimedia message objects may contain
malicious software or otherwise be harmful to your device
or PC.
You may receive a notification that a multimedia message
is waiting in the multimedia message center. To start a
packet data connection to retrieve the message to your
device, select Options > Retrieve.
When you open a multimedia message ( ), you may see
an image and a message. is shown if sound is
included or if video is included. To play the sound or
the video, select the indicator.
To see the media objects that have been included in the
multimedia message, select Options > Objects.
If the message includes a multimedia presentation, is
displayed. To play the presentation, select the indicator.
Data and settings
Your device can receive many kinds of messages that
contain data ( ):
Configuration message—You may receive settings from
your network operator, service provider, or company
information management department in a configuration
message. To save the settings, select Options > Save all.
Business card—To save the information to Contacts, select
Options > Save business card. Certificates or sound files
attached to the business card are not saved.
Ringing tone—To save the ringing tone, select Options >
Save.
Operator logo—To have the logo shown in the standby
mode instead of the network operator’s own identification,
select Options > Save.
Calendar entry—To save the invitation, select Options >
Save to Calendar.
Web message—To save the bookmark to the bookmarks
list in Services, select Options > Add to bookmarks. If the
message contains both access point settings and
bookmarks, to save the data, select Options > Save all.
E-mail notification—The note tells you how many new
e-mails you have in your remote mailbox. An extended
notification may list more detailed information.
Service messages
Service messages ( ) are notifications (for example,
news headlines) and may contain a text message or a link.
R1114_en.book Page 40 Tuesday, January 24, 2006 2:04 PM
Messaging
41
FCC DRAFT
For availability and subscription, contact your service
provider.
Mailbox
If you select Mailbox and have not set up your e-mail
account, you are prompted to do so. To start creating the
e-mail settings with the mailbox guide, select Start. See
also ‘E-mail’, p. 45.
When you create a new mailbox, the name you give to the
mailbox replaces Mailbox in the Messaging main view.
You can have up to six mailboxes.
Open the mailbox
When you open the mailbox, the device asks if you want to
connect to the mailbox (Connect to mailbox?).
To connect to your mailbox and retrieve new e-mail
headings or messages, select Yes. When you view
messages online, you are continuously connected to a
remote mailbox using a data connection. See also
‘Connection settings’, p. 86.
To view previously retrieved e-mail messages offline, select
No. When you view e-mail messages offline, your device is
not connected to the remote mailbox.
Retrieve e-mail messages
If you are offline, select Options > Connect to start a
connection to the remote mailbox.
Important: Exercise caution when opening
messages. E-mail messages may contain malicious
software or otherwise be harmful to your device or PC.
1When you have an open connection to a remote
mailbox, select Options > Retrieve e-mail and one of
the following:
New—to retrieve all new e-mail messages
Selected—to retrieve only the e-mail messages that
have been marked
All—to retrieve all messages from the mailbox
To stop retrieving messages, select Cancel.
2After you retrieve the e-mail messages, you can
continue viewing them online, or select Options >
Disconnect to close the connection and view the
e-mail messages offline.
E-mail status indicators:
The new e-mail (offline or online mode) has not
been retrieved to your device.
The new e-mail has been retrieved to your device.
The e-mail message has been read, and it has not
been retrieved to your device.
The e-mail message has been read.
R1114_en.book Page 41 Tuesday, January 24, 2006 2:04 PM
Messaging
42
FCC DRAFT
The e-mail heading has been read and the
message content has been deleted from the device.
3To open an e-mail message, press . If the e-mail
message has not been retrieved and you are offline,
you are asked if you want to retrieve this message
from the mailbox.
To view e-mail attachments, open a message that has the
attachment indicator , and select Options >
Attachments. If the attachment has a dimmed indicator,
it has not been retrieved to the device; select Options >
Retrieve.
You can also receive meeting requests in the mailbox. See
‘Meeting requests’, p. 61, and ‘Create calendar entries’,
p. 61.
To print an e-mail message on a compatible basic print
profile (BPP) equipped printer with Bluetooth connectivity
(such as HP Deskjet 450 Mobile Printer or HP Photosmart
8150), select Options > Print.
Retrieve e-mail messages automatically
To retrieve messages automatically, select Options > E-
mail settings > Automatic retrieval > Header
retrieval > Always on or Only in home net., and define
when and how often the messages are retrieved.
Retrieving e-mail messages automatically may increase
your call costs due to the data traffic.
Delete e-mail messages
To delete the contents of an e-mail message from the
device while still retaining it in the remote mailbox, select
Options > Delete. In Delete msg. from:, select Phone
only.
The device mirrors the e-mail headings in the remote
mailbox. Although you delete the message content, the
e-mail heading stays in your device. If you want to remove
the heading as well, you must first delete the e-mail
message from your remote mailbox, then make a
connection from your device to the remote mailbox again
to update the status.
To delete an e-mail from the device and the remote
mailbox, select Options > Delete. In Delete msg. from:,
select Phone and server.
If you are offline, the e-mail is deleted from your device.
During the next connection to the remote mailbox, it is
automatically deleted from the remote mailbox. If you are
using the POP3 protocol, messages marked to be deleted
are removed only after you have closed the connection to
the remote mailbox.
To cancel deleting an e-mail from the device and server,
scroll to an e-mail that has been marked to be deleted
during the next connection ( ), and select Options >
Undelete.
R1114_en.book Page 42 Tuesday, January 24, 2006 2:04 PM
Messaging
43
FCC DRAFT
Disconnect from the mailbox
When you are online, to end the data connection to the
remote mailbox, select Options > Disconnect.
View messages on a SIM card
Before you can view SIM messages, you must copy them to
a folder in your device.
1In the Messaging main view, select Options > SIM
messages.
2Select Options > Mark/Unmark > Mark or Mark all to
mark messages.
3Select Options > Copy. A list of folders opens.
4To start copying, select a folder and OK. To view the
messages, open the folder.
Messaging settings
Fill in all fields marked with Must be defined or with a red
asterisk. Follow the instructions given by your service
provider. You may also obtain settings from your service
provider in a configuration message.
Some or all message centers or access points may be preset
for your device by your service provider or network
operator, and you may not be able to change, create, edit,
or remove them.
Text messages
Press , and select Messaging > Options > Settings >
Text message and from the following:
Message centers—View a list of all text message centers
that have been defined.
Character encoding— To use character conversion to
another encoding system when available, select Reduced
support.
Msg. center in use—Select which message center is used
to deliver text messages.
Receive report—Select whether the network sends
delivery reports on your messages (network service).
Message validity—Select how long the message center
resends your message if the first attempt fails (network
service). If the recipient cannot be reached within the
validity period, the message is deleted from the message
center.
Message sent as—Change this option only if you are sure
that your message center is able to convert text messages
into these other formats. Contact your network operator.
Preferred connection—Select the connection used for
sending text messages: GSM network or packet data, if
supported by the network. See ‘Connection settings’, p. 86.
R1114_en.book Page 43 Tuesday, January 24, 2006 2:04 PM
Messaging
44
FCC DRAFT
Reply via same ctr.—Select whether you want the reply
message to be sent using the same text message center
number (network service).
Multimedia messages
Press , and select Messaging > Options > Settings >
Multimedia message and from the following:
Image size—Define the size of the image in a multimedia
message: Original (shown only when the MMS creation
mode is set to Guided or Free), Small, or Large.
MMS creation mode —If you select Guided, the device
informs you if you try to send a message that may not be
supported by the recipient. Select Restricted; the device
prevents you from sending messages that may not be
supported.
Access point in use—Select which access point is used as
the preferred connection for the multimedia message
center.
Multimedia retrieval—Select how you want to receive
multimedia messages. To receive multimedia messages
automatically in your home network, select Aut. in home
network. Outside your home network, you receive a
notification that there is multimedia message that you
can retrieve in the multimedia message center.
When you are outside your home network, sending and
receiving multimedia messages may cost you more.
If you select Multimedia retrieval > Always automatic,
your device automatically makes an active packet data
connection to retrieve the message both in and outside
your home network.
Allow anon. messages—Select whether you want to reject
messages from an anonymous sender.
Receive ads—Define whether you want to receive
multimedia message advertisements.
Receive report—Select whether you want the status of the
sent message to be shown in the log (network service).
Receiving a delivery report of a multimedia message that
has been sent to an e-mail address may not be possible.
Deny report sending—Select whether you want to deny
your device sending delivery reports of received
multimedia messages.
Message validity—Select how long the message center
resends your message if the first attempt fails (network
service). If the recipient cannot be reached within the
validity period, the message is deleted from the message
center.
R1114_en.book Page 44 Tuesday, January 24, 2006 2:04 PM
Messaging
45
FCC DRAFT
E-mail
Press , and select Messaging > Options > Settings >
E-mail and from the following:
Mailboxes—Select a mailbox to change Connection
settings, User settings, Retrieval settings, and
Automatic retrieval.
Mailbox in use— Select which mailbox you want to use for
sending e-mail.
To create a new mailbox, select Options > New mailbox in
the mailbox main view.
Connection settings
To edit the settings for the e-mail you receive, select
Incoming e-mail and from the following:
User name—Enter your user name, given to you by your
service provider.
Password—Enter your password. If you leave this field
blank, you are prompted for the password when you try to
connect to your remote mailbox.
Incoming mail server—Enter the IP address or host name
of the mail server that receives your e-mail.
Access point in use—Select an Internet access point (IAP).
See ‘Connection settings’, p. 86.
Mailbox name—Enter a name for the mailbox.
Mailbox type—Defines the e-mail protocol that your
remote mailbox service provider recommends. The options
are POP3 and IMAP4. This setting can be selected only
once and cannot be changed if you have saved or exited
from the mailbox settings. If you use the POP3 protocol,
e-mail messages are not updated automatically when you
are online. To see the latest e-mail messages, you must
disconnect and make a new connection to your mailbox.
Security (ports)—Select the security option used to
secure the connection to the remote mailbox.
Port—Define a port for the connection.
APOP secure login (for POP3 only)—Use with the POP3
protocol to encrypt the sending of passwords to the
remote e-mail server while connecting to the mailbox.
To edit the settings for the e-mail you send, select
Outgoing e-mail and from the following:
My e-mail address—Enter the e-mail address given to you
by your service provider. Replies to your messages are sent
to this address.
Outgoing mail server—Enter the IP address or host name
of the mail server that sends your e-mail. You may only be
able to use the outgoing server of your network operator.
Contact your service provider for more information.
Access point in use—Select an Internet access point (IAP).
See ‘Connection settings’, p. 86.
R1114_en.book Page 45 Tuesday, January 24, 2006 2:04 PM
Messaging
46
FCC DRAFT
The settings for User name, Password, Security (ports),
and Port are similar to the ones in Incoming e-mail.
User settings
My name—Enter your own name. Your name replaces
your e-mail address in the recipient’s device when the
recipient’s device supports this function.
Send message—Define how e-mail is sent from your
device. Select Immediately for the device to connect to
the mailbox when you select Send message. If you select
During next conn., e-mail is sent when the connection to
the remote mailbox is available.
Send copy to self—Select whether you want to save a
copy of the e-mail to your remote mailbox and to the
address defined in My e-mail address.
Include signature—Select whether you want to attach a
signature to your e-mail messages.
New e-mail alerts—Select whether you want to receive
the new e-mail indications, a tone and a note, when new
mail is received to the mailbox.
Default encoding—Select another encoding according to
language.
Retrieval settings
E-mail to retrieve—Define which parts of the e-mail are
retrieved: Headers only, Partially (kB), Messages (for
IMAP4 only), or Msgs. & attachs..
Retrieval amount—Define how many new e-mail
messages are retrieved to the mailbox.
IMAP4 folder path (for IMAP4 only)—Define the folder
path for folders to be subscribed.
Folder subscriptions (for IMAP4 only)—Subscribe to other
folders in the remote mailbox and retrieve content from
those folders.
Automatic retrieval
E-mail notifications—Select whether you want to receive
notifications when new e-mail is received in your remote
mailbox.
E-mail notifications and automatic header retrieval cannot
be active at the same time.
Header retrieval—Select whether you want the device to
retrieve new e-mail automatically. You can define when,
and how often, the messages are retrieved.
Retrieving e-mail messages automatically may increase
your call costs due to the data traffic.
R1114_en.book Page 46 Tuesday, January 24, 2006 2:04 PM
Messaging
47
FCC DRAFT
Service messages
Press , and select Messaging > Options > Settings >
Service message. Select whether you want to receive
service messages. If you want to set the device to
automatically activate the browser and start a network
connection to retrieve content when you receive a service
message, select Download messages > Automatically.
Cell broadcast
Check the available topics and related topic numbers with
your service provider. Press , and select Messaging >
Options > Settings > Cell broadcast and from the
following:
Reception—Select whether you want to receive cell
broadcast messages.
Language—Select the languages in which you want to
receive messages: All, Selected, or Other.
Topic detection—Select whether the device automatically
searches for new topic numbers, and saves the new
numbers without a name to the topic list.
Other settings
Press , and select Messaging > Options > Settings >
Other and from the following:
Save sent messages—Select whether you want to save a
copy of the text messages, multimedia messages, or
e-mail that you send to the Sent folder.
No. of saved msgs.—Define how many sent messages are
saved to the Sent folder at a time. The default limit is 20
messages. When the limit is reached, the oldest message
is deleted.
Memory in use—If a compatible memory card is inserted
in the device, select the memory where you want to save
your messages: Phone memory or Memory card.
R1114_en.book Page 47 Tuesday, January 24, 2006 2:04 PM
Make calls
48
FCC DRAFT
Make calls
Voice calls
Tip! To increase or decrease the volume during a
call, press or . If you have set the volume to
Mute, you cannot adjust the volume with the or
keys.
To adjust the volume, select Unmute, and press or .
1In the standby mode, enter the phone number,
including the area code. To remove a number, press
.
For international calls, press twice for the +
character (replaces the international access code), and
enter the country code, area code (omit the leading
zero if necessary), and phone number.
2Press to call the number.
3Press to end the call (or to cancel the call
attempt).
Pressing always ends a call, even if another
application is active. To end a call if the cover is open, and
a compatible headset is not connected, close the cover.
To make a call from Contacts, press , and select
Contacts. Scroll to the desired name, or enter the first
letters of the name to the search field. Matching contacts
are listed. To call, press . Select the call type Voice call.
You must copy the contacts from your SIM card to
Contacts before you can make a call this way. See ‘Copy
contacts’, p. 55.
To call your voice mailbox (network service), press and hold
in the standby mode. See also ‘Call diverting’, p. 91.
Tip! To change the phone number of your voice
mailbox, press , and select Tools > Voice mail >
Options > Change number. Enter the number
(obtained from your service provider), and select OK.
To call a recently dialed number in the standby mode, press
. Scroll to the number you want, and press to call
the number.
Make a conference call
1Make a call to the first participant.
2To make a call to another participant, select Options >
New call. The first call is automatically put on hold.
3When the new call is answered, to join the first
participant in the conference call, select Options >
Conference.
R1114_en.book Page 48 Tuesday, January 24, 2006 2:04 PM
Make calls
49
FCC DRAFT
To add a new person to the call, select Options > New
call > Options > Conference > Add to conference.
Your device supports conference calls between a
maximum of six participants, including yourself.
To have a private conversation with one of the
participants, select Options > Conference > Private.
Select a participant, and select Private. The conference
call is put on hold on your device. The other
participants can still continue the conference call.
Once you have finished the private conversation, select
Options > Add to conference to return to the
conference call.
To drop a participant, select Options > Conference >
Drop participant, scroll to the participant, and select
Drop.
4To end the active conference call, press .
Speed dial a phone number
To activate speed dialing, press , and select Tools >
Settings > Call > Speed dialing > On.
To assign a phone number to one of the speed dialing keys
( — ), press , and select Tools > Speed dial. Scroll
to the key to which you want to assign the phone number,
and select Options > Assign. is reserved for the voice
mailbox.
To call in the standby mode, press the speed dial key and
.
Voice dialing
Your device supports enhanced voice commands.
Enhanced voice commands are not dependent on the
speaker’s voice, so the user does not record voice tags in
advance. Instead, the device creates a voice tag for the
entries in contacts, and compares the spoken voice tag to
it. The voice recognition in the device adapts to the main
user’s voice to recognize the voice commands better.
The voice tag for a contact is the name or nickname that
is saved on the contact card. To listen to the synthesized
voice tag, open a contact card, and select Options > Play
voice tag.
Make a call with a voice tag
Note: Using voice tags may be difficult in a noisy
environment or during an emergency, so you should
not rely solely upon voice dialing in all circumstances.
When you use voice dialing, the loudspeaker is in use. Hold
the device at a short distance away when you say the
voice tag.
1To start voice dialing, press and hold the voice key. If
you are using a compatible headset with the headset
R1114_en.book Page 49 Tuesday, January 24, 2006 2:04 PM
Make calls
50
FCC DRAFT
key, press and hold the headset key to start voice
dialing.
2A short tone is played, and Speak now is displayed. Say
clearly the name or nickname that is saved on the
contact card.
3The device plays a synthesized voice tag for the
recognized contact in the selected device language,
and displays the name and number. After a timeout of
1.5 seconds, the device dials the number.
If the recognized contact was not correct, select Next
to view a list of other matches or Quit to cancel voice
dialing.
If several numbers are saved under the name, the device
selects the default number, if it has been set. Otherwise,
the device selects the first available number of the
following: Mobile, Mobile (home), Mobile (business),
Telephone, Tel. (home), and Tel. (business).
Answer or reject a call
To answer the call if the cover is open, press . To
answer a call by opening the cover, set the If the cover is
closed, open the cover, and the call will be answered
automatically. See ‘Cover display settings’, p. 84.
To mute the ringing tone when a call comes in, select
Silence. If the cover is closed, press the cover key to select
Silence.
Tip! If a compatible headset is connected to the
device, to answer and end a call, press the headset key.
If the cover is open, and you do not want to answer a call,
press or close the cover to reject it, if a compatible
headset is not connected. If the cover is closed, press the
cover key once to silence the ringing, and again to reject
the call. The caller hears a line busy tone. If you have
activated the Call divert settings > If busy function to
divert calls, rejecting an incoming call also diverts the call.
See ‘Call diverting’, p. 91.
When you reject an incoming call, you can also send a text
message to the caller informing why you cannot answer
the call. Select Options > Send text message. You can edit
the text before sending it. To set up this option and write
a standard text message, see ‘Call settings’, p. 85.
Call waiting (network service)
You can answer a call while you have another call in
progress if you have activated Call waiting in Tools >
Settings > Call > Call waiting.
Tip! To change the device tones for different
environments and events (for example, when you want
your device to be silent), see ‘Profiles—set tones’, p. 79.
To answer the waiting call, press . The first call is put
on hold.
R1114_en.book Page 50 Tuesday, January 24, 2006 2:04 PM
Make calls
51
FCC DRAFT
To switch between the two calls, select Swap. To connect
an incoming call or a call on hold with an active call and
to disconnect yourself from the calls, select Options >
Transfer . To end the active call, press . To end both
calls, select Options > End all calls.
Options during a voice call
Many of the options that you can use during a voice call
are network services. Select Options during a call for some
of the following options: Mute or Unmute, Answer,
Reject, Swap, Hold or Unhold, Activate handset, Activate
loudsp., or Activate handsfree (if a compatible headset
with Bluetooth connectivity is attached), End active call
or End all calls, New call, Conference, and Transfer.
Select from the following:
Replace—To end an active call and replace it by answering
the waiting call.
Send DTMF—To send DTMF tone strings, for example, a
password. Enter the DTMF string or search for it in
Contacts. To enter a wait character (w) or a pause
character (p), press repeatedly. Select OK to send the
tone.
Tip! You can add DTMF tones to the Phone number
or DTMF fields in a contact card.
Tip! If you select Activate loudsp., you can close the
cover and continue the call.
Log
Recent calls
To monitor the phone numbers of missed, received, and
dialed calls, press , and select My own > Log > Recent
calls. The device registers missed and received calls only if
the network supports these functions, the device is
switched on, and has network coverage.
Tip! When you see a note in the standby mode about
missed calls, select Show to access the list of missed
calls. To call back, scroll to a name or number, and
press .
To clear all recent call lists, select Options > Clear recent
calls in the recent calls main view. To clear one of the call
registers, open the register you want to erase, and select
Options > Clear list. To clear an individual event, open a
register, scroll to the event, and press .
Call duration
To monitor the approximate duration of your incoming
and outgoing calls, press , and select My own > Log >
Call duration.
R1114_en.book Page 51 Tuesday, January 24, 2006 2:04 PM
Make calls
52
FCC DRAFT
To set the display of the call duration while a call is active,
select Connect. > Log > Options > Settings > Show call
duration > Yes or No.
Note: The actual time invoiced for calls by your
service provider may vary, depending on network
features, rounding off for billing, and so forth.
To clear call duration timers, select Options > Clear
timers. For this you need the lock code, see ‘Security’, p.88
and ‘Phone and SIM’, p. 88.
Packet data
To check the amount of data sent and received during
packet data connections, press , and select My own >
Log > Packet data. For example, you may be charged for
your packet data connections by the amount of data sent
and received.
Monitor all communication events
Icons in Log:
Incoming
Outgoing
Missed communication events
To monitor all voice and video calls, text messages, or data
connections registered by the device, press , select My
own > Log, and press to open the general log. For each
communication event, you can see the sender or recipient
name, phone number, name of the service provider, or
access point. You can filter the general log to view just one
type of event and create new contact cards based on the
log information.
Tip! To see the duration of a voice call on the main
display during an active call, select Options > Settings
> Show call duration > Yes.
Tip! To view a list of sent messages, press , and
select Messaging > Sent.
Subevents, such as a text message sent in more than one
part and packet data connections, are logged as one
communication event. Connections to your mailbox,
multimedia messaging center, or Web pages are shown as
packet data connections.
To filter the log, select Options > Filter and a filter.
To erase the contents of the log, recent calls register, and
messaging delivery reports permanently, select Options >
Clear log. Select Yes to confirm. To remove a single event
from the log, press .
To set the Log duration, select Options > Settings > Log
duration. The log events remain in the device memory for
a set number of days after which they are automatically
erased to free memory. If you select No log, all the log
contents, recent calls register, and messaging delivery
reports are permanently deleted.
R1114_en.book Page 52 Tuesday, January 24, 2006 2:04 PM
Make calls
53
FCC DRAFT
To view the details of a communication event, in the
general log view scroll to an event, and press .
Tip! In the details view, to copy a phone number to
the clipboard and paste it to a text message, select
Options > Copy Number.
Packet data counter and connection timer: To view how
much data, measured in kilobytes, is transferred and how
long a certain packet data connection lasts, scroll to an
incoming or outgoing event indicated by Pack., and select
Options > View details.
R1114_en.book Page 53 Tuesday, January 24, 2006 2:04 PM
Contacts (phonebook)
54
FCC DRAFT
Contacts (phonebook)
Press , and select Contacts. In Contacts you can add a
personal ringing tone or a thumbnail image to a contact
card. You can also create contact groups, that allow you
to send text messages or e-mail to many recipients at the
same time. You can add received contact information
(business cards) to contacts. See ‘Data and settings’, p. 40.
Contact information can only be sent to or received from
compatible devices.
Save names and numbers
1Select Options > New contact.
2Fill in the fields that you want, and select Done.
To edit contact cards in Contacts, scroll to the contact
card you want to edit, and select Options > Edit.
Tip! To print contact cards on a compatible basic
print profile (BPP) equipped printer with Bluetooth
connectivity (such as HP Deskjet 450 Mobile Printer or
HP Photosmart 8150), select Options > Print.
To delete a contact card in Contacts, select a card, and
press . To delete several contact cards at the same time,
press and to mark the contacts, and press to
delete.
Tip! To add and edit contact cards, use Nokia Contacts
Editor available in Nokia PC Suite.
To attach a small thumbnail image to a contact card, open
the contact card, and select Options > Edit > Options >
Add thumbnail. The thumbnail image is shown when the
contact calls.
Tip! Speed dialing is a quick way to call frequently
used numbers. You can assign speed dialing keys to
eight phone numbers. See ‘Speed dial a phone number’,
p. 49.
Tip! To send contact information, select the card you
want to send. Select Options > Send > Via text
message, Via multimedia, Via Bluetooth, or Via
infrared. See ‘Messaging’, p. 35 and ‘Send data’, p. 72.
To add a contact to a group, select Options > Add to
group (shown only if you have created a group). See
‘Create contact groups’, p. 56.
To view the amount of contacts, groups, and the available
memory in Contacts, select Options > Memory details.
R1114_en.book Page 54 Tuesday, January 24, 2006 2:04 PM
Contacts (phonebook)
55
FCC DRAFT
Default numbers and addresses
You can assign default numbers or addresses to a contact
card. In this way if a contact has several numbers or
addresses, you can easily call or send a message to the
contact to a certain number or address. The default
number is also used in voice dialing.
1In the address book, select a contact, and press .
2Select Options > Defaults.
3Select a default to which you want to add a number or
an address, and select Assign.
4Select a number or an address you want to set as a
default.
The default number or address is underlined in the contact
card.
Copy contacts
To copy names and numbers from a SIM card to your
device, press , and select Contacts > Options > SIM
contacts > SIM directory. Select the names you want to
copy and Options > Copy to Contacts.
To copy contacts to your SIM card, press , and select
Contacts. Select the names you want to copy and
Options > Copy to SIM direct.; or select Options >
Copy > To SIM directory. Only the contact card fields
supported by your SIM card are copied.
Tip! You can synchronize your contacts to a
compatible PC with Nokia PC Suite.
SIM directory and services
For availability and information on using SIM card
services, contact your SIM card vendor. This may be the
service provider, network operator, or other vendor.
Press , and select Contacts > Options > SIM
contacts > SIM directory to see the names and numbers
stored on the SIM card. In the SIM directory you can add,
edit, or copy numbers to contacts, and you can make calls.
To view the list of fixed dialing numbers, select Options >
SIM contacts > Fixed dialing contacts. This setting is
only shown if supported by your SIM card.
To restrict calls from your device to selected phone
numbers, select Options > Activ. fixed dialing. To add
new numbers to the fixed dialing list, select Options >
New SIM contact. You need the PIN2 code for these
functions.
When you use Fixed dialing, packet data connections are
not possible, except when sending text messages over a
packet data connection. In this case, the message center
number and the recipient’s phone number must be
included on the fixed dialing list.
R1114_en.book Page 55 Tuesday, January 24, 2006 2:04 PM
Contacts (phonebook)
56
FCC DRAFT
When fixed dialing is activated, calls may be possible to
the official emergency number programmed into your
device.
Add ringing tones for contacts
When a contact or group member calls you, the device
plays the chosen ringing tone (if the caller’s phone
number is sent with the call and your device recognizes
it).
1Press to open a contact card or go to the groups
list, and select a contact group.
2Select Options > Ringing tone. A list of ringing tones
opens.
3Select the ringing tone you want to use for the
individual contact or the selected group.
To remove the ringing tone, select Default tone from the
list of ringing tones.
Create contact groups
1In Contacts, press to open the groups list.
2Select Options > New group.
3Write a name for the group or use the default name
Group , and select OK.
4Open the group, and select Options > Add members.
5Scroll to a contact, and press to mark it. To add
multiple members at a time, repeat this action on all
the contacts you want to add.
6Select OK to add the contacts to the group.
To rename a group, select Options > Rename, enter the
new name, and select OK.
Remove members from a group
1In the groups list, open the group you want to modify.
2Scroll to the contact, and select Options > Remove
from group.
3Select Yes to remove the contact from the group.
Tip! To check to which groups a contact belongs,
scroll to the contact, and select Options > Belongs to
groups.
R1114_en.book Page 56 Tuesday, January 24, 2006 2:04 PM
Services
57
FCC DRAFT
Services
Various service providers maintain pages specifically
designed for mobile devices. These pages use the wireless
markup language (WML), extensible hypertext markup
language (XHTML), or hypertext markup language (HTML).
Check the availability of services, pricing, and fees with
your network operator or service provider. Service
providers will also give you instructions on how to use their
services.
Press , and select Services.
Shortcut: To start a connection, press and hold
in the standby mode.
Services access point
To access pages, you need service settings for the page that
you want to use. You may receive the settings in a special
text message from the network operator or service
provider that offers the Web page. See ‘Data and settings’,
p. 40. For more information, contact your network
operator or service provider.
Tip! Settings may be available on the Web site of a
network operator or service provider.
Enter settings manually
1Press , select Tools > Settings > Connection >
Access points, and define the settings for an access
point. Follow the instructions given to you by your
service provider. See ‘Connection settings’, p. 86.
2Press , and select Services > Options > Bookmark
manager > Add bookmark. Write a name for the
bookmark and the address of the page defined for the
current access point.
3To set the created access point as the default access
point, select Options > Settings > Access point.
Bookmarks view
The bookmarks view opens when you open Services.
Your device may have some bookmarks loaded for sites not
affiliated with Nokia. Nokia does not warrant or endorse
these sites. If you choose to access them, you should take
the same precautions for security or content as you would
with any Internet site.
indicates the starting page defined for the default
access point.
R1114_en.book Page 57 Tuesday, January 24, 2006 2:04 PM
Services
58
FCC DRAFT
Connection security
If the security indicator is displayed during a
connection, the data transmission between the device and
the Internet gateway or server is encrypted.
The security icon does not indicate that the data
transmission between the gateway and the content server
(or place where the requested resource is stored) is secure.
The service provider secures the data transmission
between the gateway and the content server.
Select Options > Details > Security to view details about
the connection, encryption status, and information about
server and user authentication.
Security certificates may be required for some services,
such as banking services. For more information, contact
your service provider. See also ‘Certif. management’, p. 90.
Browse
Important: Use only services that you trust and that
offer adequate security and protection against harmful
software.
To download a page, select a bookmark, or enter the
address in the field ( ).
On a browser page, new links appear underlined in blue
and previously visited links in purple. Images that act as
links have a blue border around them.
To open links and make selections, press .
Shortcut: Press to jump to the end of a page, and
press to jump to the beginning of a page.
To go to the previous page while browsing, select Back. If
Back is not available, select Options > Navigation
options > History to view a chronological list of the pages
you visited during a browsing session.
To retrieve the latest content from the server, select
Options > Navigation options > Reload.
To save a bookmark, select Options > Save as bookmark.
Tip! To access the bookmarks view while browsing,
press and hold . To return to the browser view, select
Options > Back to page.
To save a page while browsing, select Options > Advanced
options > Save page. You can save pages to the device
memory or a compatible memory card (if inserted), and
browse them when offline. To access the pages later, press
in the bookmarks view to open the Saved pages view.
To enter a new URL address, select Options > Navigation
options > Go to web address.
R1114_en.book Page 58 Tuesday, January 24, 2006 2:04 PM
Services
59
FCC DRAFT
You can download files that cannot be shown on the
browser page, such as ringing tones, images, operator
logos, themes, and video clips. To download an item, scroll
to the link, and press .
When you start a download, a list of ongoing, paused, and
completed downloads from the current browsing session is
displayed. To view the list, select Options > Tools >
Downloads. In the list, scroll to an item, and select Options
to pause, resume, or cancel ongoing downloads, or open,
save, or delete completed downloads.
Copyright protections may prevent some images, music
(including ringing tones), and other content from being
copied, modified, transferred or forwarded.
Important: Only install and use applications and
other software from sources that offer adequate security
and protection against harmful software.
Download and purchase items
You can download items such as ringing tones, images,
operator logos, themes, and video clips. These items can be
provided free, or you can purchase them. Downloaded
items are handled by the respective applications in your
device. For example, a downloaded photo can be saved in
Gallery.
Important: Only install and use applications and
other software from sources that offer adequate security
and protection against harmful software.
1To download the item, scroll to the link, and press .
2Select the appropriate option to purchase the item.
3Carefully read all the information provided.
To continue the download, select Accept. To cancel the
download, select Cancel.
End a connection
To end the connection and view the browser page offline,
select Options > Advanced options > Disconnect. To end
the connection and close the browser, select Options >
Exit.
Empty the cache
The information or services you have accessed are stored
in the cache memory of the device.
A cache is a memory location that is used to store data
temporarily. If you have tried to access or have accessed
confidential information requiring passwords, empty the
cache after each use. The information or services you have
accessed are stored in the cache. To empty the cache,
select Options > Advanced options > Clear cache.
R1114_en.book Page 59 Tuesday, January 24, 2006 2:04 PM
Services
60
FCC DRAFT
Services settings
Select Options > Settings and from the following:
Access point—Change the default access point. See
‘Connection settings’, p. 86. Some or all access points may
be preset for your device by your service provider or
network operator, and you may not be able to change,
create, edit, or remove them.
Show images and objects—Select whether you want to
load images while browsing. If you select No, to load
images later during browsing, select Options > Show
images.
Font size—Select the text size.
Default encoding—If text characters are not shown
correctly, you can select another encoding according to
language.
Automatic bookmarks—Enable or disable automatic
bookmark collecting. If you want to continue collecting
automatic bookmarks but hide the folder from the
bookmarks view, select Hide folder.
Screen size—Select what is shown when you are
browsing: Select. keys only or Full screen.
Homepage—Define the home page.
Search page—Define a Web page that is downloaded
when you select Navigation options > Open search page
in the bookmarks view, or when browsing.
Volume—If you want the browser to play sounds
embedded on Web pages, select a volume level.
Rendering—If you want the page layout shown as
accurately as possible when in Small screen mode, select
By quality. If you do not want external cascading style
sheets to be downloaded, select By speed.
Cookies—Enable or disable the receiving and sending of
cookies.
Java/ECMA script—Enable or disable the use of scripts.
Security warnings—Hide or show security notifications.
Confirm touch tones—Select whether you want to
confirm before the device sends touch tones during a voice
call. See also ‘Options during a voice call’, p. 51.
R1114_en.book Page 60 Tuesday, January 24, 2006 2:04 PM
Calendar
61
FCC DRAFT
Calendar
Use Calendar to remind you of meetings, anniversaries,
and to keep track of your tasks and other notes.
Create calendar entries
Shortcut: In the day, week, or month calendar view,
press any key ( — ). An appointment entry opens,
and the characters you enter are added to the Subject
field. In the to-do view, a to-do note entry opens.
1Press , and select
Calendar > Options >
New entry and one of the
following:
Appointment—to remind
you of an appointment
that has a specific date
and time
Meeting request—to
send a meeting request by
e-mail (a mailbox must be
defined in the device)
Memo—to write a general entry for a day
Anniversary—to remind you of birthdays or special
dates (entries are repeated every year)
To-do—to remind you of a task that needs doing by a
specific date
2Fill in the fields. To set an alarm, select Alarm > On,
and enter the Alarm time and Alarm date.
To add a description for an appointment or a meeting,
select Options > Add description.
3To save the entry, select Done.
When the calendar alarms for a note, select Silence to
turn off the calendar alarm tone. The reminder text stays
on the screen. To end the calendar alarm, select Stop. To
set the alarm to snooze, select Snooze.
Tip! You can synchronize your calendar with a
compatible PC using Nokia PC Suite. When creating a
calendar entry, set the desired Synchronization
option.
Meeting requests
If you receive a meeting request to the mailbox in your
device, the request is saved to the calendar when you open
the e-mail.
R1114_en.book Page 61 Tuesday, January 24, 2006 2:04 PM
Calendar
62
FCC DRAFT
You can view received meeting requests in the mailbox or
in the calendar. To respond to a meeting request using
e-mail, select Options > Respond.
Calendar views
Tip! Select Options > Settings to change the
starting day of the week or the view that is shown
when you open the calendar.
In the month view, dates that have calendar entries are
marked with a small triangle in the right bottom corner.
In the week view, memos and anniversaries are placed
before 8 a.m. To switch between the month view, week
view, day view, and to-do view, press .
To go to a certain date, select Options > Go to date. To
jump to today, press .
To send a calendar note to a compatible device, select
Options > Send.
To print calendar entries on a compatible basic print
profile (BPP) equipped printer with Bluetooth connectivity
(such as HP Deskjet 450 Mobile Printer or HP Photosmart
8150), select Options > Print.
Manage your calendar entries
Deleting past entries in Calendar saves space in your
device memory.
To delete more than one event at a time, go to the month
view, and select Options > Delete entry > Before date or
All entries.
To mark a task as completed, scroll to it in the to-do view,
and select Options > Mark as done.
Calendar settings
To modify the Calendar alarm tone, Default view, Week
starts on, and Week view title, and Default mailbox ,
select Options > Settings.
R1114_en.book Page 62 Tuesday, January 24, 2006 2:04 PM
My own
63
FCC DRAFT
My own
Music player
Press , and select My own > Music plyr.. With the
music player, you can play music files and create and listen
to playlists.
Warning: Listen to music at a moderate level.
Continuous exposure to high volume may damage your
hearing. Do not hold the device near your ear when the
loudspeaker is in use, because the volume may be
extremely loud.
Add music
When you open the music player for the first time, the
player searches the device memory for music files to create
a music library.
After you add or remove music files in the device, update
your music library. Select Options > Music library >
Options > Update Music library.
Tip! You can transfer music files from your device to
your compatible memory card (if inserted) with Nokia
Audio Manager available in Nokia PC Suite.
Play music
When you open the music player, the previously played
track or playlist is displayed. To view the music library,
select Options > Music library and the desired song list.
To start playing the songs in the view, select Options >
Play.
When a song is playing, to change between play and
pause, press and .
To stop a song, press . To fast forward or rewind, press
and hold or . To start playing the next or previous
song, press or .
To save the song list as a playlist, select Options > Add to
track list, and create a new playlist, or select a saved
playlist.
To adjust the volume, press or .
To select between random play and normal play mode,
select Options > Random play. To select whether playing
stops at the end of the playlist or restarts from its
beginning, select Options > Loop.
Icons in Music plyr.: —Repeat; —Random;
— Repeat and random; and —Loudspeaker muted.
R1114_en.book Page 63 Tuesday, January 24, 2006 2:04 PM
My own
64
FCC DRAFT
Tip! To leave the application open and music playing
in the background, press to return to the standby
mode. To return to the application, press , and
select Music plyr..
To open your Web bookmarks for downloading music,
select Options > Track downloads.
To return to the standby mode and leave the music
playing in the background, select Options > Play in
background.
Music library
To view the music library, select Options > Music library.
All tracks lists all music. To view sorted songs, select
Albums, Artists, Genres, or Composers. The album, artist,
genre, and composer information is collected from the ID3
or M4A tags of the song files, if available.
To add songs, albums, artists, genres, or composers to a
playlist, select the items and Options > Add to track list.
You can create a new playlist or add to an existing one.
To view playlists, select Track lists. To create a new
playlist, select Options > New track list. When viewing a
playlist you have created yourself, to add more songs,
select Options > Add tracks.
To delete a playlist, press . This only deletes the
playlist, not the music files.
Visual Radio (network
service)
You can use the Visual Radio application as a traditional
FM radio with automatic tuning and saved stations. If you
tune to stations that offer Visual Radio service, you can
view visual information on the display related to the radio
program. The Visual Radio service uses packet data
(network service). You can listen to the FM radio while
using other applications.
To use the Visual Radio service, the following conditions
are required:
• The device must be switched on.
• The device must have a valid SIM card inserted.
• The station you listen to and the network operator you
use must support this service.
• An Internet access point must be defined to access the
operator’s visual radio server. See ‘Access points’, p. 86.
• The station must have the correct Visual Radio service
ID defined and Visual Radio service enabled. See ‘Saved
stations’, p. 66.
If you do not have access to the Visual Radio service, the
operators and radio stations in your area may not support
Visual Radio. The Visual Radio service may not be available
in all areas and countries.
R1114_en.book Page 64 Tuesday, January 24, 2006 2:04 PM
My own
65
FCC DRAFT
The FM radio depends on an antenna other than the
wireless device antenna. A compatible headset or
enhancement needs to be attached to the device for the
FM radio to function properly.
You can listen to the radio with the built-in loudspeaker or
a compatible headset. When using the loudspeaker, keep
the headset plugged in the device. The lead of the headset
functions as the antenna of the radio, so let it hang freely.
Warning: Listen to music at a moderate level.
Continuous exposure to high volume may damage your
hearing. Do not hold the device near your ear when the
loudspeaker is in use, because the volume may be
extremely loud.
You can make a call or answer an incoming call while
listening to the radio. The radio is turned off when there is
an active call. When the call is finished, turn the radio back
on manually.
The radio selects the used frequency band based on the
country information received from the network.
Visual Radio can be used for listening when the device
cover is closed. Channel information may be displayed on
the cover display. To mute or unmute the radio, press the
cover key.
Listen to the radio
Note that the quality of the radio broadcast depends on
the coverage of the radio station in that particular area.
Connect a compatible headset to the device. The lead of
the headset functions as the radio antenna, so let it hang
freely. Press , and select My own > Radio.
To start a station search, select or . Searching
stops when a station is found. To change the frequency
manually, select Options > Manual tuning.
If you have previously saved
radio stations, select or
to go to the next or
previous saved station. To
select the memory location
of a station press the
corresponding number key.
To adjust the volume, press
or . To listen to the
radio using the loudspeaker,
select Options > Activate
loudsp..
To view available stations based on location, select
Options > Station directory (network service).
To save the current tuned station to your station list,
select Options > Save station. To open the list of your
Add graphic and icons
in text to show the on-
screen buttons
R1114_en.book Page 65 Tuesday, January 24, 2006 2:04 PM
My own
66
FCC DRAFT
saved stations, select Options > Stations. See ‘Saved
stations’, p. 66.
To return to the standby mode and leave the FM radio
playing in the background, select Options > Play in
background.
View visual content
To check availability and costs, and to subscribe to the
service, contact your network operator or service provider.
To view available visual content for a tuned station, select
or Options > Station > Start visual service. If the
visual service ID has not been saved for the station, enter
it, or select Retrieve to search for it in the station
directory (network service).
When the connection to the visual service is established,
the display shows the current visual content designed by
the content provider.
To adjust display settings for the visual content view,
select Options > Display settings > Lighting or Screen
saver timeout.
Saved stations
You can save up to 20 radio stations in Visual Radio. To
open your station list, select Options > Stations.
To listen to a saved station, select Options > Station >
Listen. To view available visual content for a station with
Visual Radio service, select Options > Station > Start
visual service.
To change station details, select Options > Station > Edit.
Settings
Select Options > Settings and from the following:
Start-up tone—To select a tone to play when the
application is started.
Auto-start service—To have the Visual Radio service start
automatically when you select a saved station that offers
visual service, select Yes.
Access point—To select the access point used for the data
connection. You do not need an access point to use the
application as an ordinary FM radio.
Instant messaging
(network service)
Press , and select My own > IM.
Instant messaging (IM) allows you to converse with other
people using instant messages and join discussion forums
(IM groups) with specific topics. Various service providers
maintain IM servers that you can log in to after you
R1114_en.book Page 66 Tuesday, January 24, 2006 2:04 PM
My own
67
FCC DRAFT
register to an IM service. Service providers may differ in
their support of features.
Select Conversations to start or continue a conversation
with an IM user; IM contacts to create, edit, or view the
online status of your IM contacts; IM groups to start or
continue a group conversation with multiple IM users; or
Recorded chats to view a previous IM session that you
saved.
Check the availability of services, pricing, instructions, and
fees with your network operator or service provider.
Receive IM settings
You must save the settings to access the service that you
want to use. You may receive the settings in a special text
message from the network operator or service provider
that offers the IM service. See ‘Data and settings’, p. 40.
You can also enter the settings manually. See ‘Chat server
settings’, p. 69.
Connect to an IM server
1To connect to the IM server in use, open IM, and select
Options > Login. To change the IM server in use and
save new IM servers, see ‘Chat server settings’, p. 69.
2Enter your user ID and password, and press to log
in. You obtain the user ID and password for the IM
server from your service provider.
3To log out, select Options > Logout.
Modify your IM settings
Select Options > Settings > IM settings and from the
following:
Use screen name (shown only if IM groups are supported
by the server)—To enter a nickname, select Yes.
IM presence—To allow others to see if you are online,
select Active for all.
Allow messages from—To allow messages from all, select
All.
Allow invitations from—To allow invitations only from
your IM contacts, select IM contacts only. IM invitations
are sent by IM contacts who want you to join their groups.
Msg. scrolling speed—To select the speed at which new
messages are displayed.
Sort IM contacts—To select how your IM contacts are
sorted: Alphabetically or By online status.
Availability reloading—To select how to update
information about whether your IM contacts are online or
offline, select Automatic or Manual.
Offline contacts—To select whether IM contacts with an
offline status are shown in the IM contacts list.
R1114_en.book Page 67 Tuesday, January 24, 2006 2:04 PM
My own
68
FCC DRAFT
Search for IM groups and users
To search for groups, in the IM groups view, select
Options > Search. You can search by Group name, Topic,
and Members (user ID).
To search for users, in the IM contacts view, select
Options > New IM contact > Search from server. You
can search by User's name, User ID, Phone number, and
E-mail address.
Join IM groups
The IM groups view shows a list of the IM groups that you
have saved or are currently joined to.
To join a saved IM group, press .
To join an IM group that is not on the list, but for which
you know the group ID, select Options > Join new group.
To leave the IM group, select Options > Leave IM group.
Chat
After you join an IM group, you can view the messages
that are exchanged there, and send your own messages.
To send a message, write the message in the message
editor field, and press .
To send a private message to a participant, select
Options > Send private msg..
To reply to a private message sent to you, select the
message and Options > Reply.
To invite IM contacts who are online to join the IM group,
select Options > Send invitation.
To prevent receiving messages from certain participants,
select Options > Blocking options and the desired option.
Record chats
To record the messages that are exchanged during a
conversation or while you are joined in a IM group, select
Options > Record chat. To stop recording, select
Options > Stop recording. To view the recorded chats, in
the main view, select Recorded chats.
View and start conversations
The Conversations view shows a list of the individual
conversation participants that you have an ongoing
conversation with. Ongoing conversations are
automatically closed when you exit IM.
To view a conversation, scroll to a participant, and press
.
To continue the conversation, write your message, and
press .
R1114_en.book Page 68 Tuesday, January 24, 2006 2:04 PM
My own
69
FCC DRAFT
To return to the conversations list without closing the
conversation, select Back. To close the conversation, select
Options > End conversation.
To start a new conversation, select Options > New
conversation.
To save a conversation participant to your IM contacts,
select Options > Add to IM contacts.
To send automatic replies to incoming messages, select
Options > Set auto reply on. You can still receive
messages.
IM contacts
In the IM contacts view, you can retrieve chat contact lists
from the server, or add a new chat contact to a contact list.
When you log in to the server, the previously used chat
contact list is retrieved from the server automatically.
Chat server settings
Select Options > Settings > Server settings. You may
receive the settings in a special text message from the
network operator or service provider that offers the chat
service. You obtain the user ID and password from your
service provider when you register to the service. If you do
not know your user ID or password, contact your service
provider.
Servers—View a list of all defined IM servers.
Default server—Change the IM server to which you want
to connect.
IM login type—To log in automatically when you start IM,
select On app. start-up.
To add a new server to your list of IM servers, select
Servers > Options > New server. Enter the following
settings:
Server name—the name for the chat server
Access point in use—the access point you want to use for
the server
Web address—the URL address of the IM server
User ID—your user ID
Password—your login password
Games
Press , and select My own and a game. For instructions
on how to play the game, select Options > Help.
R1114_en.book Page 69 Tuesday, January 24, 2006 2:04 PM
Connectivity
70
FCC DRAFT
Connectivity
Bluetooth connectivity
You can connect wirelessly to other compatible devices
with wireless Bluetooth technology. Compatible devices
may include mobile phones, computers, and
enhancements such as headsets and car kits. You can use
Bluetooth connectivity to send images, video clips, music
and sound clips, and notes; connect wirelessly to your
compatible PC (for example, to transfer files); and connect
to a compatible printer to print images with Image print.
See ‘Image print’, p. 29.
Since devices with Bluetooth technology communicate
using radio waves, your device and the other device do not
need to be in direct line-of-sight. The two devices only
need to be within 10 meters (33 feet) of each other, but
the connection may be subject to interference from
obstructions such as walls or from other electronic
devices.
This device is compliant with Bluetooth Specification 1.2
that supports the following profiles: basic printing,
generic access, serial port, dial-up networking, headset,
handsfree, generic object exchange, object push, file
transfer, basic imaging, SIM access, and human interface
device. To ensure interoperability between other devices
supporting Bluetooth technology, use Nokia approved
enhancements for this model. Check with the
manufacturers of other devices to determine their
compatibility with this device.
Glossary: A profile corresponds to a service or a
function, and defines how different devices connect.
For example, the handsfree profile is used between a
handsfree device and your device. For devices to be
compatible, they must support the same profiles.
There may be restrictions on using Bluetooth technology in
some locations. Check with your local authorities or service
provider.
Features using Bluetooth technology, or allowing such
features to run in the background while using other
features, increase the demand on battery power and
reduce the battery life.
When the device is locked, you cannot use Bluetooth
connectivity. See ‘Security’, p. 88 for more information on
locking the device.
R1114_en.book Page 70 Tuesday, January 24, 2006 2:04 PM
Connectivity
71
FCC DRAFT
Settings
Press , and select Connect. > Bluetooth. When you
open the application for the first time, you are asked to
define a name for your device. After you set Bluetooth
connectivity on and change My phone's visibility to
Shown to all, your device and this name can be seen by
other users with devices using Bluetooth technology.
Select from the following:
Bluetooth—To connect wirelessly to another compatible
device, set Bluetooth connectivity On, and establish a
connection.
My phone's visibility—To allow your device to be found by
other devices with Bluetooth technology, select Shown to
all. To hide it from other devices, select Hidden.
My phone's name—Edit the name of your device.
Remote SIM mode—To enable another device, such as a
compatible car kit enhancement, to use the SIM card in
your device to connect to the network, select On.
Remote SIM mode
To use the remote SIM mode with a compatible car kit
enhancement, set Bluetooth connectivity on, and enable
the use of the remote SIM mode with your device. Before
the mode can be activated, the two devices must be paired
and the pairing initiated from the other device. When
pairing, use a 16-digit passcode, and set the other device
as authorized. See ‘Pair devices’, p. 72. Activate the remote
SIM mode from the other device.
When remote SIM mode is on in your Nokia N71, Remote
SIM is displayed in the standby mode. The connection to
the wireless network is turned off, as indicated by in
the signal strength indicator area, and you cannot use SIM
card services or features requiring cellular network
coverage.
When the wireless device is in the remote SIM mode, you
can only use a compatible connected enhancement, such
as a car kit, to make or receive calls. Your wireless device
will not make any calls, except to the emergency numbers
programmed into your device, while in this mode. To make
calls from your device, you must first leave the remote SIM
mode. If the device has been locked, enter the code to
unlock it first.
To leave the remote SIM mode, press , and select Exit
rem. SIM mode.
Security tips
When you are not using Bluetooth connectivity, select
Bluetooth > Off or My phone's visibility > Hidden.
Do not pair with an unknown device.
R1114_en.book Page 71 Tuesday, January 24, 2006 2:04 PM
Connectivity
72
FCC DRAFT
Send data
Several Bluetooth connections can be active at a time. For
example, if you are connected to a compatible headset,
you can also transfer files to another compatible device at
the same time.
Bluetooth connectivity indicators
• When is shown in the standby mode, Bluetooth
connectivity is on.
• When is blinking, your device is trying to connect
with another device.
• When is shown continuously, data is being
transmitted.
Tip! To send text, open Notes, write the text, and
select Options > Send > Via Bluetooth.
1Open the application where the item you want to send
is stored. For example, to send an image to another
compatible device, open Gallery.
2Select the item and Options > Send > Via Bluetooth.
Devices with Bluetooth technology within range start
to appear on the display.
Device icons: —computer, —phone, —audio or
video device, and —other device.
To interrupt the search, select Stop.
3Select the device with which you want to connect.
4If the other device requires pairing before data can be
transmitted, a tone sounds, and you are asked to enter
a passcode. See ‘Pair devices’, p. 72.
5When the connection has been established, Sending
data is shown.
The Sent folder in Messaging does not store messages sent
using Bluetooth connectivity.
Tip! When searching for devices, some devices may
show only the unique address (device address). To find
the unique address of your device, enter the code
*#2820# in the standby mode.
Pair devices
To open the paired devices view ( ), in the Bluetooth
application main view, press .
Before pairing, create your own passcode (1—16 digits),
and agree with the owner of the other device to use the
same code. Devices that do not have a user interface have
a factory-set passcode. The passcode is used only once.
To pair with a device, select Options > New paired device.
Devices with wireless Bluetooth technology within range
start to appear on the display. Select the device, and enter
the passcode. The same passcode must be entered on the
other device as well. After pairing, the device is saved to
the paired devices view.
R1114_en.book Page 72 Tuesday, January 24, 2006 2:04 PM
Connectivity
73
FCC DRAFT
Paired devices are indicated by in the device search.
To set a device as authorized or unauthorized, scroll to a
device, and select from the following options:
Set as authorized—Connections between your device and
this device can be made without your knowledge. No
separate acceptance or authorization is needed. Use this
status for your own devices, such as your compatible
headset or PC or devices that belong to someone you trust.
indicates authorized devices in the paired devices view.
Set as unauthorized—Connection requests from this
device must be accepted separately every time.
To cancel a pairing, scroll to the device, and select
Options > Delete. If you want to cancel all pairings, select
Options > Delete all.
Tip! If you are currently connected to a device and
delete the pairing with that device, pairing is removed
immediately, and the connection is switched off.
Receive data
When you receive data through Bluetooth connectivity, a
tone sounds, and you are asked if you want to accept the
message. If you accept, is shown, and the item is
placed in the Inbox folder in Messaging. Messages
received through Bluetooth connectivity are indicated by
. See ‘Inbox—receive messages’, p. 39.
Switch off Bluetooth connectivity
To switch off Bluetooth connectivity, select Bluetooth >
Off.
Infrared connection
With infrared (IR), you can transfer data such as business
cards, calendar notes, and media files with a compatible
device.
Do not point the IR beam at anyone's eye or allow it to
interfere with other IR devices. This device is a Class 1
laser product.
Send and receive data:
1Make sure that the IR ports of the sending and
receiving devices are pointing at each other, and that
there are no obstructions between the devices. The
preferable distance between the two devices is up to
1 meter (3 feet).
2The user of the receiving device activates the IR port.
To activate the IR port of your device to receive data,
press , and select Connect. > Infrared.
3The user of the sending device selects the desired IR
function to start the data transfer.
R1114_en.book Page 73 Tuesday, January 24, 2006 2:04 PM
Connectivity
74
FCC DRAFT
To send data, locate the desired file in an application
or the file manager, and select Options > Send > Via
infrared.
If data transfer is not started within 1 minute after the
activation of the IR port, the connection is cancelled and
must be started again.
All items received through IR are placed in the Inbox
folder in Messaging. New IR messages are indicated by
.
When blinks, your device is trying to connect to the
other device or a connection has been lost.
When is shown continuously, the IR connection is
active, and your device is ready to send and receive data
using its IR port.
Data cable
To select the function for which the USB data cable
connection is used, press , and select Connect. > Data
cable > Ask on connection, PC Suite, Data transfer, or
PictBridge.
PC connections
You can use your device with a variety of PC connectivity
and data communications applications. For example, with
Nokia PC Suite you can transfer images between your
device and a compatible PC.
Always create the connection from the PC to synchronize
with your device.
Your device as a modem
You can use your device as a modem to send and receive
e-mail, or to connect to the Internet with a compatible PC
by using Bluetooth connectivity, infrared, or a USB data
cable. Detailed installation instructions can be found in the
user guide for Nokia PC Suite.
Tip! When using Nokia PC Suite for the first time, to
connect your device to a compatible PC and to use
Nokia PC Suite, use the Get Connected wizard available
in Nokia PC Suite.
Connection manager
R1114_en.book Page 74 Tuesday, January 24, 2006 2:04 PM
Connectivity
75
FCC DRAFT
Press , and select Connect. > Conn. mgr.. To view the
status of data connections or end connections, select
Active data connections.
Data connections
In the active connections view, you can see the open data
connections: data calls ( ) and packet data connections
().
Note: The actual time invoiced for calls by your
service provider may vary, depending on network
features, rounding off for billing, and so forth.
To end a connection, select Options > Disconnect. To close
all open connections, select Options > Disconnect all.
To view the details of a connection, select Options >
Details. The details shown depend on the connection type.
Synchronization
Press , and select Connect. > Sync. Sync enables you
to synchronize your notes, calendar, contacts, or e-mail
with various compatible calendar and address book
applications on a compatible computer or on the Internet.
You can also create or edit synchronization settings.
The synchronization application uses SyncML technology
for synchronization. For information on SyncML
compatibility, contact the supplier of the application with
which you want to synchronize your device data.
You may receive synchronization settings in a special text
message. See ‘Data and settings’, p. 40.
Synchronize data
In the Sync main view, you can see the different
synchronization profiles.
1Select a synchronization profile and Options >
Synchronize. The status of the synchronization is
shown on the display.
To cancel synchronization before it finishes, select
Cancel.
You are notified when the synchronization is complete.
2To view the log file showing the synchronization status
and how many entries have been added, updated,
deleted, or discarded (not synchronized) in your device
or on the server, select Yes.
Device manager
Press , and select Connect. > Dev. mgr.. You may
receive server profiles and different configuration settings
R1114_en.book Page 75 Tuesday, January 24, 2006 2:04 PM
Connectivity
76
FCC DRAFT
from your network operator, service provider, or company
information management department. These
configuration settings may include access point settings
for data connections and other settings used by different
applications in your device.
To connect to a server and receive configuration settings
for your device, scroll to a profile, and select Options >
Start configuration.
To allow or deny receiving of configuration settings from
service providers, select Options > Enable config. or
Disable config..
Server profile settings
Contact your service provider for the correct settings.
Server name—Enter a name for the configuration server.
Server ID—Enter the unique ID to identify the
configuration server.
Server password—Enter a password to identify your
device to the server.
Access point—Select an access point to be used when
connecting to the server.
Host address—Enter the URL address of the server.
Port—Enter the port number of the server.
User name and Password—Enter your user name and
password.
Allow configuration—To receive configuration settings
from the server, select Yes.
Auto-accept all reqs.—If you want your device to ask for
confirmation before accepting a configuration from the
server, select No.
R1114_en.book Page 76 Tuesday, January 24, 2006 2:04 PM
Office
77
FCC DRAFT
Office
Calculator
To add, substract, multiply, divide, and calculate square
roots and percentages, press , and select Office >
Calculator.
Note: This calculator has limited accuracy and is
designed for simple calculations.
Converter
To convert measures from one unit to another, press ,
and select Office > Converter.
Converter has limited accuracy, and rounding errors may
occur.
1In the Type field, select the measure you want to use.
2In first Unit field, select the unit from which you want
to convert. In the next Unit field, select the unit to
which you want to convert.
3In the first Amount field, enter the value you want to
convert. The other Amount field changes automatically
to show the converted value.
Set base currency and exchange rates
Select Type > Currency > Options > Currency rates.
Before you can make currency conversions, you must
select a base currency and add exchange rates. The rate of
the base currency is always 1.
Note: When you change base currency, you must
enter the new rates because all previously set
exchange rates are set to zero.
Notes
To write notes, press , and select Office > Notes. You
can send notes to compatible devices, and save plain text
files (.txt format) that you receive to Notes.
To print a note on a compatible basic print profile (BPP)
equipped printer with Bluetooth connectivity (such as HP
Deskjet 450 Mobile Printer or HP Photosmart 8150), select
Options > Print.
R1114_en.book Page 77 Tuesday, January 24, 2006 2:04 PM
Office
78
FCC DRAFT
Recorder
To record voice memos, press , and select Office >
Recorder. To record a telephone conversation, open
Recorder during a voice call. Both parties hear a tone
every 5 seconds during recording.
The recorder cannot be used when a data call or GPRS
conection is active.
R1114_en.book Page 78 Tuesday, January 24, 2006 2:04 PM
Personalize your device
79
FCC DRAFT
Personalize your device
The open applications and folders that have applications
open are indicated by a small icon in the main menu.
• To use the standby display for fast access to your most
frequently used applications, see ‘Active standby
mode’, p. 81.
• To change the standby
mode background image
or what is shown in the
screen saver, see ‘Change
the look of your device’,
p. 80.
• To customize the ringing
tones, see ‘Profiles—set
tones’, p. 79 and ‘Add
ringing tones for
contacts’, p. 56.
• To change the shortcuts
assigned for the different presses of the scroll key and
selection keys in the standby mode, see ‘Standby mode’,
p. 84.
• To configure the cover display, see ‘Cover display
settings’, p. 84.
• To change the clock shown in the standby mode, press
, and select Clock > Options > Settings > Clock
type > Analog or Digital.
• To change the welcome note to an image or animation,
press , and select Tools > Settings > Phone >
General > Welcome note or logo.
• To change the main menu view, in the main menu,
select Options > View > Grid or List.
• To rearrange the main menu, in the main menu, select
Options > Move, Move to folder, or New folder. You
can move less used applications into folders, and place
applications that you use more often into the main
menu.
Profiles—set tones
To set and customize the ringing tones, message alert
tones, and other tones for different events, environments,
or caller groups, press , and select Tools > Profiles.
To change the profile, press in the standby mode.
Scroll to the profile you want to activate, and select OK.
Tip! In fold closed mode, press repeatedly until
the desired profile is selected in the cover display, and
press the cover key.
R1114_en.book Page 79 Tuesday, January 24, 2006 2:04 PM
Personalize your device
80
FCC DRAFT
To modify a profile, press , and select Tools > Profiles.
Scroll to the profile, and select Options > Customize.
Scroll to the setting you want to change, and press to
open the choices. Tones stored on the memory card are
indicated with . You can scroll through the tone list
and listen to each one before you make your selection. To
stop the sound, press any key.
When you choose a tone, Tone downloads opens a list of
bookmarks. You can select a bookmark and start
connection to a Web page to download tones.
If you want the caller’s name to be said when your device
rings, select Options > Customize > Say caller’s name >
On. The caller’s name must be saved in Contacts.
To create a new profile, select Options > Create new.
Offline profile
The Offline profile lets you use the device without
connecting to the wireless network. When you activate
the Offline profile, the connection to the wireless
network is turned off, as indicated by in the signal
strength indicator area. All wireless phone signals to and
from the device are prevented. If you try to send
messages, they are placed in the outbox to be sent later.
Warning: In the offline profile you cannot make or
receive any calls, except make calls to certain
emergency numbers, or use other features that require
network coverage. To make calls, you must first activate
the phone function by changing profiles. If the device
has been locked, enter the lock code.
To leave the Offline profile, press , and select another
profile. The device re-enables wireless transmissions
(providing there is sufficient signal strength). If a
Bluetooth connection is activated before entering the
Offline profile, it will be deactivated. A Bluetooth
connection is automatically reactivated after leaving the
Offline profile. See ‘Settings’, p. 71.
Change the look of your
device
To change the look of the display, such as the wallpaper
and icons, press , and select Tools > Themes. The active
theme is indicated by . In Themes you can group
together elements from other themes or select images
from the Gallery to personalize themes further. The
themes on the memory card (if inserted) are indicated by
. The themes on the memory card are not available if
the memory card is not inserted in the device. If you want
to use the themes saved in the memory card without the
memory card, save the themes in the device memory first.
To open a browser connection and download more themes,
select Theme downloads.
R1114_en.book Page 80 Tuesday, January 24, 2006 2:04 PM
Personalize your device
81
FCC DRAFT
To activate a theme, scroll to it, and select Options >
Apply. To preview a theme before activating it, select
Options > Preview.
To edit themes, scroll to a theme, and select Options >
Edit to change the Wallpaper and Power saver settings.
To restore the selected theme to its original settings, select
Options > Restore orig. theme when you edit a theme.
Active standby mode
Use your standby display for fast access to your most
frequently used applications. By default, the active
standby mode is on.
Press , select Tools > Settings > Phone > Standby
mode > Active standby, and press to switch the active
standby on or off.
The active standby display is
shown with default
applications across the top of
the screen, and calendar,
to-do, and player events
listed below.
Scroll to an application or
event, and press .
The standard scroll key shortcuts available in the standby
mode cannot be used when the active standby mode is on.
To change the default applications shortcuts, press ,
select Tools > Settings > Phone > Standby mode >
Active standby apps., and press .
Some shortcuts may be fixed, and you are not able to
change them.
R1114_en.book Page 81 Tuesday, January 24, 2006 2:04 PM
Tools
82
FCC DRAFT
Tools
Settings Wizard
Use Settings Wizard to configure your device settings for
e-mail, push to talk (network service).
Press , and select Tools > Settings Wizard.
Select the item from the menu that you want to configure
your device for, and press .
E-mail
1When you choose to configure your e-mail settings,
Settings Wizard detects your available network
operator, and asks you to confirm it. Select OK, or
scroll to another network operator, and select OK.
2Settings Wizard prompts you to enter the details of
your e-mail address, user name, and password.
3Select each in turn, and select Options > Change. Enter
the details, and select OK.
4Select Options > OK when you are finished.
5Select OK to confirm that you want to set up the
mailbox for the specified operator.
Push to talk (network service)
1When you choose to configure your push to talk (PTT)
settings, Settings Wizard detects your available
network operator, and asks you to confirm it. Select OK,
or scroll to another network operator, and select OK.
2Some operators require a user name, password, and
nickname. Select each in turn, and select Options >
Change. Enter the details, and select OK.
3Select Options > OK when you are finished.
4Select OK to confirm that you want to set up PTT for
the specified operator.
Operator
This menu item is only available if Settings Wizard detects
that further operator settings are available.
1When you choose to configure your operator settings,
Settings Wizard detects your available network
operator and asks you to confirm it. Select OK, or scroll
to another network operator, and select OK.
2Select OK to confirm that you want to configure your
device for the specified operator.
R1114_en.book Page 82 Tuesday, January 24, 2006 2:04 PM
Tools
83
FCC DRAFT
Update
If you cannot find your network operator, or some settings
are not available, you can check for an update to Settings
Wizard, and download the latest settings. Select Options >
Update to make an update.
To start the updating process, you need to select the access
point to be used by Settings Wizard.
To update the settings database, you must have an Internet
access point configured to your device. Check with your
network operator for details.
Share with a friend
You can share Settings Wizard with your friends using
Bluetooth connectivity.
From the main menu, select Options > Beam to friend.
To send the application using Bluetooth connectivity,
ensure that Bluetooth connectivity is switched on in both
devices. Select Via Bluetooth.
Select the recipient’s name, and select OK to start sending
or Cancel to abort.
More information
If you experience any problems with Settings Wizard, visit
http://www.nokia.com/phonesettings.
Settings
To change settings, press , and select Tools > Settings.
To open a settings group, press . Scroll to a setting you
want to change, and press .
Some settings may be preset for the device by your
network operator or service provider, and you may not be
able to change them.
Phone settings
General
Phone language—Changing the language of the display
texts in your device also affects the format and separators
used for date and time (for example, in calculations).
Automatic selects the language according to the
information on your SIM card. After you change the
display text language, the device restarts.
Changing the settings for Phone language or Writing
language affects every application in your device, and the
change remains effective until you change these settings
again.
R1114_en.book Page 83 Tuesday, January 24, 2006 2:04 PM
Tools
84
FCC DRAFT
Writing language—Changing the language affects the
characters and special characters available when writing
text and the predictive text dictionary used.
Predictive text—Set the predictive text input On or Off
for the editors in the device. The predictive text dictionary
is not available for all languages.
Welcome note or logo—The welcome note or logo is
displayed briefly each time you switch on the device.
Select Default to use the default image, Text to write a
welcome note, or Image to select an image from Gallery.
Orig. phone settings—You can reset some of the settings
to their original values. To do this, you need the lock code.
See ‘Security’, p. 88, ‘Phone and SIM’, p. 89. After
resetting, the device may take a longer time to power on.
Documents and files are unaffected.
Side key—Define the use of the side key for voice
commands or PTT.
Standby mode
Active standby—Use shortcuts to applications in the
standby mode. See ‘Active standby mode’, p. 81.
Left selection key—Assign a shortcut to ( ) in the
standby mode.
Right selection key—Assign a shortcut to ( ) in the
standby mode.
Active standby apps.—Select the application shortcuts
you want to appear in the active standby. This setting is
only available if Active standby is on.
You can also assign keypad shortcuts for the different
presses of the scroll key. The scroll key shortcuts are not
available if the Active standby is on.
Operator logo—This setting is only available if you have
received and saved an operator logo. Select Off if you do
not want the logo to be shown.
Display
Brightness—Adjust the basic brightness level of the display
to lighter or darker. However, in extreme light conditions,
the brightness of the display is automatically adjusted.
Pwr. saver time-out—Select the time-out period after
which the power saver is activated.
Light time-out—Select a time-out after which the
backlight of the display is switched off.
Cover display settings
Brightness—You can change the brightness of the cover
display to lighter or darker. Changing the brightness of the
cover display does not affect the brightness of the main
display.
R1114_en.book Page 84 Tuesday, January 24, 2006 2:04 PM
Tools
85
FCC DRAFT
Wallpaper—Select and crop a background image, and set
how time is displayed on the cover display in the standby
mode.
Power saver—Select the cover display power saver type, its
time-out period, and if an image or an animation screen
saver is shown after the time-out period before the power
saver is activated.
Opening cover answer.—Select On to answer calls by
opening the cover.
Call settings
Send my caller ID—You can set your phone number to be
displayed to (Yes) or hidden from (No) the person to whom
you are calling, or the value may be set by your network
operator or service provider when you make a subscription
(Set by network) (network service).
Call waiting—If you have activated call waiting (network
service), the network notifies you of a new incoming call
while you have a call in progress. Set the function on
(Activate) or off (Cancel), or check whether the function
is activated (Check status).
Reject call with SMS—To send a text message to a caller
informing why you could not answer the call, select Yes.
See ‘Answer or reject a call’, p. 50.
Message text—Write a text to be sent in a text message
when you reject a call.
Image in video call—You can deny video sending when you
receive a video call. Select a still image to be displayed
instead of video.
Automatic redial—To set your device to make a maximum
of 10 attempts to connect the call after an unsuccessful
call attempt. To stop automatic redialing, press .
Summary after call—Activate this setting if you want the
device to briefly display the approximate duration of the
last call.
Speed dialling—To dial numbers assigned to the speed
dialing keys ( - ) press and hold the key. See also
‘Speed dial a phone number’, p. 49.
Anykey answer—To answer an incoming call, by pressing
any key except , , , and , select On.
Line in use—This setting (network service) is shown only
if the SIM card supports two subscriber numbers, that is,
two phone lines. Select which phone line you want to use
for making calls and sending text messages. Calls on both
lines can be answered irrespective of the selected line. If
you select Line 2 and have not subscribed to this network
R1114_en.book Page 85 Tuesday, January 24, 2006 2:04 PM
Tools
86
FCC DRAFT
service, you will not be able to make calls. When line 2 is
selected, is shown in the standby mode.
Tip! To switch between the phone lines, press and
hold in the standby mode.
Line change—To prevent line selection (network service),
select Disable if supported by your SIM card. To change
this setting, you need the PIN2 code.
Connection settings
Tip! Some of your device settings can be
automatically set up using the Settings Wizard, see
‘Settings Wizard’ p. 82.
Data connections and access points
Your device supports packet data connections, such as
GPRS in the GSM network. When you use your device in
GSM network, multiple data connections can be active at
the same time, and access points can share a data
connection.
To establish a data connection, an access point is required.
You can define different kinds of access points:
• MMS access point to send and receive multimedia
messages
• Access point for the Services application to view WML
or XHTML pages
• Internet access point (IAP) to send and receive e-mail
and connect to the Internet
Check the type of access point you need with your service
provider for the service you want to access. For availability
and subscription to packet data connection services,
contact your network operator or service provider.
Access points
You may receive access point settings in a message from a
service provider. See ‘Data and settings’, p. 40. Some or all
access points may be preset for your device by your service
provider or network operator, and you may not be able to
change, create, edit, or remove them. indicates a
protected access point.
indicates a packet data access point.
To create a new access point, select Options > New access
point. To edit the settings of an access point, select
Options > Edit. Follow the instructions from your service
provider.
Connection name—Enter a descriptive name for the
connection.
Data bearer—Select the data connection type.
R1114_en.book Page 86 Tuesday, January 24, 2006 2:04 PM
Tools
87
FCC DRAFT
Depending on the data connection you select, only certain
setting fields are available. Fill in all fields marked with
Must be defined or with a red asterisk. Other fields can be
left empty, unless you have been instructed otherwise by
your service provider.
To be able to use a data connection, the network service
provider must support this feature, and if necessary,
activate it for your SIM card.
Packet data
Follow the instructions from your service provider.
Access point name—Obtain the access point name from
your network operator or service provider.
User name—The user name may be needed to make a data
connection, and is usually provided by the service provider.
Prompt password—If you must enter the password every
time you log in to a server, or if you do not want to save
your password in the device, select Yes.
Password—A password may be needed to make a data
connection, and is usually provided by the service provider.
Authentication—Define the level of authentication:
Normal or Secure.
Homepage—Depending on the access point you are
setting up, enter the Web address or the address of the
multimedia messaging center.
Select Options > Advanced settings to change the
following settings:
Network type—Select the Internet protocol type: IPv4
settings or IPv6 settings. The other settings depend on
the selected network type.
Phone IP address (for IPv4 only)—Enter the IP address of
your device.
DNS address—In Primary name server:, enter the IP
address of the primary DNS server. In Second. name
server:, enter the IP address of the secondary DNS server.
Contact your Internet service provider to obtain these
addresses.
Proxy serv. address—Define the address for the proxy
server.
Proxy port number—Enter the proxy port number.
Homepage—Define a home page.
Select Options > Advanced settings and from the
following:
IPv4 settings > Phone IP address (the IP address of your
device), Subnet mask (the subnet IP address), Default
gateway (the gateway), and DNS address—Enter the IP
R1114_en.book Page 87 Tuesday, January 24, 2006 2:04 PM
Tools
88
FCC DRAFT
addresses of the primary and secondary DNS server.
Contact your Internet service provider for these addresses.
IPv6 settings > DNS address—Select Automatic, Well-
known, or User defined.
Ad-hoc channel (only for Ad-hoc)—To enter a channel
number (1-11) manually, select User defined.
Proxy serv. address—Enter the address for the proxy
server.
Proxy port number—Enter the proxy port number.
Packet data
The packet data settings affect all access points using a
packet data connection.
Packet data conn.—If you select When available and you
are in a network that supports packet data, the device
registers to the packet data network. Starting an active
packet data connection (for example, to send and receive
e-mail) is quicker. If there is no packet data coverage, the
device periodically tries to establish a packet data
connection. If you select When needed, the device uses a
packet data connection only if you start an application or
action that needs it.
Access point—The access point name is needed to use
your device as a packet data modem to your computer.
Configurations
You may receive trusted server settings from your network
operator or service provider in a configuration message, or
the settings may be stored on your SIM card. You can save
these settings to your device, view, or delete them in
Configurations.
Date and time
See ‘Clock settings’, p. 12, and language settings in
‘General’, p. 83.
Security
Phone and SIM
PIN code request—When active, the code is requested
each time the device is switched on. Deactivating the
personal identification number (PIN) code request may not
be allowed by some SIM cards. See ‘Glossary of PIN and
lock codes’, p. 89.
PIN code, PIN2 code, and Lock code—You can change the
lock code, PIN code, and PIN2 code. These codes can only
include the numbers from 0 to 9. If you forget any of these
R1114_en.book Page 88 Tuesday, January 24, 2006 2:04 PM
Tools
89
FCC DRAFT
codes, contact your service provider. See ‘Glossary of PIN
and lock codes’, p. 89.
Avoid using access codes similar to the emergency
numbers to prevent accidental dialing of the emergency
number.
Autolock period—You can set an autolock period, a
time-out after which the device automatically locks. To
turn off the autolock period, select None.
To unlock the device, enter the lock code.
When the device is locked, calls still may be possible to the
official emergency number programmed into your device.
Tip! To lock the device manually, press . A list of
commands opens. Select Lock phone.
Lock if SIM changed—You can set the device to ask for
the lock code when an unknown SIM card is inserted into
your device. The device maintains a list of SIM cards that
are recognized as the owner’s cards.
Closed user group—You can specify a group of people to
whom you can call and who can call you (network service).
When calls are limited to closed user groups, calls still may
be possible to the official emergency number programmed
into your device.
Confirm SIM services—You can set the device to display
confirmation messages when you are using a SIM card
service (network service).
Glossary of PIN and lock codes
If you forget any of these codes, contact your service
provider.
Personal identification number (PIN) code—This code
protects your SIM card against unauthorized use. The PIN
code (4 to 8 digits) is usually supplied with the SIM card.
After three consecutive incorrect PIN code entries, the
code is blocked, and you need the PUK code to unblock it.
PIN2 code—This code (4 to 8 digits) is supplied with some
SIM cards, and is required to access some functions in
your device.
Lock code (also known as security code)—This code (5
digits) can be used to lock the device to avoid
unauthorized use. The factory setting for the lock code is
12345. To avoid unauthorized use of your device, change
the lock code. Keep the new code secret and in a safe place
separate from your device. If you forget the code, contact
your service provider.
Personal unblocking key (PUK) code and PUK2 code—These
codes (8 digits) are required to change a blocked PIN code
or PIN2 code, respectively. If the codes are not supplied
with the SIM card, contact the operator whose SIM card
is in your device.
R1114_en.book Page 89 Tuesday, January 24, 2006 2:04 PM
Tools
90
FCC DRAFT
Certif. management
Digital certificates do not guarantee safety; they are used
to verify the origin of software.
In the certificate management main view, you can see a
list of authority certificates that are stored in your device.
Press to see a list of personal certificates, if available.
Digital certificates should be used if you want to connect
to an online bank or another site or remote server for
actions that involve transferring confidential information.
They should also be used if you want to reduce the risk of
viruses or other malicious software and be sure of the
authenticity of software when downloading and installing
software.
Important: Even if the use of certificates makes the
risks involved in remote connections and software
installation considerably smaller, they must be used
correctly in order to benefit from increased security. The
existence of a certificate does not offer any protection by
itself; the certificate manager must contain correct,
authentic, or trusted certificates for increased security to
be available. Certificates have a restricted lifetime. If
Expired certificate or Certificate not valid yet is shown
even if the certificate should be valid, check that the
current date and time in your device are correct.
View certificate details
You can only be sure of the correct identity of a server
when the signature and the period of validity of a server
certificate have been checked.
You are notified if the identity of the server is not
authentic or if you do not have the correct security
certificate in your device.
To check certificate details, scroll to a certificate, and
select Options > Certificate details. When you open
certificate details, the validity of the certificate is checked,
and one of the following notes may be displayed:
Certificate not trusted—You have not set any application
to use the certificate. See ‘Change the trust settings’, p. 90.
Expired certificate—The period of validity has ended for
the selected certificate.
Certificate not valid yet—The period of validity has not
yet begun for the selected certificate.
Certificate corrupted—The certificate cannot be used.
Contact the certificate issuer.
Change the trust settings
Before changing any certificate settings, you must make
sure that you really trust the owner of the certificate and
that the certificate really belongs to the listed owner.
R1114_en.book Page 90 Tuesday, January 24, 2006 2:04 PM
Tools
91
FCC DRAFT
Scroll to an authority certificate, and select Options >
Trust settings. Depending on the certificate, a list of the
applications that can use the selected certificate is shown.
For example:
Symbian installation: Yes—The certificate is able to
certify the origin of a new Symbian operating system
application.
Internet > Yes—The certificate is able to certify servers.
App. installation > Yes—The certificate is able to certify
the origin of a new JavaTM application.
Select Options > Edit trust setting to change the value.
Track protect. object
Some copyright-protected music files may include a
transaction identifier. Select whether you allow the
identifier to be sent with the music file if you send or
forward the file. The provider of the music file can use the
identifier to track the distribution of the files.
Call diverting
Call diverting allows you to divert your incoming calls to
your voice mailbox or another phone number. For details,
contact your service provider.
Select which calls you want to divert and the desired
divert option. To divert voice calls when your number is
busy or when you reject incoming calls, select If busy. Set
the option on (Activate) or off (Cancel), or check whether
the option is activated (Check status).
Several divert options can be active at the same time.
When all calls are diverted, is shown in the
standby mode.
Call barring and call diverting cannot be active at the
same time.
Call barring
Call barring (network service) allows you to restrict the
calls that you make or receive with the device. To change
the settings, you need the barring password from your
service provider.
Select the desired barring option, and set it on (Activate)
or off (Cancel), or check whether the option is active
(Check status). Call barring affects all calls, including
data calls.
Call barring and call diverting cannot be active at the
same time.
When calls are barred, calls still may be possible to the
official emergency number programmed into your device.
R1114_en.book Page 91 Tuesday, January 24, 2006 2:04 PM
Tools
92
FCC DRAFT
Network
Operator selection—Select Automatic to set the device
to search for and select one of the available networks, or
Manual to manually select the network from a list of
networks. If the connection to the manually selected
network is lost, the device sounds an error tone and asks
you to reselect a network. The selected network must have
a roaming agreement with your home network, that is, the
operator whose SIM card is in your device.
Glossary: A roaming agreement is an agreement
between two or more network service providers to
enable the users of one service provider to use the
services of other service providers.
Cell info display—Select On to set the device to indicate
when it is used in a cellular network based on
microcellular network (MCN) technology and to activate
cell info reception.
Enhancement settings
In the standby mode, indicates a compatible headset
is connected, and that the headset is unavailable, or
a Bluetooth connection to a headset is lost. indicates
a compatible loopset is connected, that a TTY is
connected, and that a car kit is connected.
Select Headset, Loopset, TTY, Bluetooth handsfree, or
Car kit and from the following:
Default profile—Set the profile that you want activated
each time you connect a certain enhancement to your
device. See ‘Profiles—set tones’, p. 79.
Automatic answer—Set if you want the device to answer
an incoming call automatically after 5 seconds. If the
Ringing type is set to Beep once or Silent, automatic
answer is disabled. Automatic answer is not available for
TTY.
If you are using a TTY, you must activate it on your device.
Press , and select Tools > Settings > Enhancement >
TTY > Use TTY > Yes.
Voice commands
You can use voice commands to control your device. For
more information about the enhanced voice commands
supported by your device, see ‘Voice dialing’, p. 49.
To activate enhanced voice commands for starting
applications and profiles, you must open the Voice com.
application and its Profiles folder. Press , and select
R1114_en.book Page 92 Tuesday, January 24, 2006 2:04 PM
Tools
93
FCC DRAFT
Tools > Voice com. > Profiles; the device creates voice
tags for the applications and profiles. To use enhanced
voice commands, press and hold in the standby mode,
and say a voice command. The voice command is the name
of the application or profile displayed in the list.
Tip! Alternatively, to define the side key to use voice
commands, see ‘General’, p. 83.
To add more applications to the list, select Options > New
application. To add a second voice command that can be
used to start the application, select Options > Change
command, and enter the new voice command as text.
Avoid very short names, abbreviations, and acronyms.
To listen to the synthesized voice tag, select Options >
Playback.
To change voice command settings, select Options >
Settings. To switch off the synthesizer that plays
recognized voice tags and commands in the selected
device language, select Synthesizer > Off. To reset voice
recognition learning (for example, when the main user of
the device has changed), select Reset voice adapts..
Application manager
Press , and select Tools > Manager. You can install two
types of applications and software to your device:
• J2ME™ applications based on Java technology with the
extension .jad or .jar ( ).
• Other applications and software suitable for the
Symbian operating system ( ). The installation files
have the .sis extension. Only install software
specifically designed for your Nokia N71. Software
providers will often refer to the official model number
of this product: the Nokia N71-1.
Installation files may be transferred to your device from a
compatible computer, downloaded during browsing, or
sent to you in a multimedia message, as an e-mail
attachment, or using Bluetooth connectivity or infrared.
You can use Nokia Application Installer in Nokia PC Suite
to install an application to your device. If you use
Microsoft Windows Explorer to transfer a file, save the file
to a compatible memory card (local disk).
Install applications and software
indicates a .sis application, a Java application,
that the application is not fully installed, and
that the application is installed on the memory card.
Important: Only install and use applications and
other software from sources that offer adequate security
and protection against harmful software.
Before installation, note the following:
R1114_en.book Page 93 Tuesday, January 24, 2006 2:04 PM
Tools
94
FCC DRAFT
• To view the application type, version number, and the
supplier or manufacturer of the application, select
Options > View details.
• To display the security certificate details of the
application, select Options > View certificate. See
‘Certif. management’, p. 90.
• If you install a file that contains an update or repair to
an existing application, you can only restore the
original application if you have the original
installation file or a full back-up copy of the removed
software package. To restore the original application,
remove the application, and install the application
again from the original installation file or the back-up
copy.
• The .jar file is required for installing Java applications.
If it is missing, the device may ask you to download it.
If there is no access point defined for the application,
you are asked to select one. When you are
downloading the .jar file, you may need to enter a user
name and password to access the server. You obtain
these from the supplier or manufacturer of the
application.
1To locate an installation file, press , and select
Tools > Manager. Alternatively, search the device
memory or a memory card (if inserted) in File mgr., or
open a message in Messaging > Inbox that contains
an installation file.
2In Manager, select Options > Install. In other
applications, scroll to the installation file, and press
to start the installation.
During installation, the device shows information
about the progress of the installation. If you are
installing an application without a digital signature or
certification, the device displays a warning. Continue
installation only if you are sure of the origin and
contents of the application.
To start an installed application, locate it in the menu, and
press .
To start a network connection and to view extra
information about the application, select Options > Go to
web address, if available.
To see what software packages are installed or removed
and when, select Options > View log.
To send your installation log to a help desk so that they can
see what is installed or removed, select Options > Send
log > Via text message or Via e-mail (available only if the
correct e-mail settings are in place).
Remove applications and software
Scroll to a software package, and select Options >
Remove. Select Yes to confirm.
R1114_en.book Page 94 Tuesday, January 24, 2006 2:04 PM
Tools
95
FCC DRAFT
If you remove software, you can only reinstall it if you have
the original software package or a full backup of the
removed software package. If you remove a software
package, you may no longer be able to open documents
created with that software.
Note: If another software package depends on the
software package that you removed, the other software
package may stop working. Refer to the documentation
of the installed software package for details.
Settings
Select Options > Settings and from the following:
Online certif. check—Select to check the online
certificates before installing an application.
Default web address—Set the default address used when
checking online certificates.
Some Java applications may require a phone call, a
message to be sent, or a network connection to a specific
access point for downloading extra data or components. In
the Manager main view, scroll to an application, and
select Options > Suite settings to change settings related
to that specific application.
Activation keys
To view the digital rights activation keys stored in your
device, press , and select Tools > Activ. keys and from
the following:
Valid keys—View keys that are connected to one or more
media files and keys whose validity period has not started
yet.
Invalid keys—View keys that are not valid; the time period
for using the media file is exceeded or there is a protected
media file in the device but no connected activation key.
Keys not in use—View keys that have no media files
connected to them in the device.
To buy more usage time or extend the usage period for a
media file, select an invalid activation key and Options >
Activate content. Activation keys cannot be updated if
Services message reception is disabled. See ‘Service
messages’, p. 40.
To view detailed information, such as the validity status
and ability to send the file, scroll to an activation key, and
press .
R1114_en.book Page 95 Tuesday, January 24, 2006 2:04 PM
Troubleshooting
96
FCC DRAFT
Troubleshooting
Q&A
Access codes
Q: What is my password for the lock, PIN, or PUK codes?
A: The default lock code is 12345. If you forget or lose the
lock code, contact your device dealer. If you forget or lose
a PIN or PUK code, or if you have not received such a code,
contact your service provider. For information about
passwords, contact your access point provider, for
example, a commercial Internet service provider (ISP),
service provider, or network operator.
Application not responding
Q: How do I close an application that is not responding?
A: To open the application switching window, press and hold
. Scroll to the application, and press to close the
application.
Bluetooth connectivity
Q: Why can’t I find my friend’s device?
A: Check that both devices have activated Bluetooth
connectivity. Check that the distance between the two
devices is not over 10 meters (33 feet) and that there are
no walls or other obstructions between the devices. Check
that the other device is not in hidden mode. Check that
both devices are compatible.
Q: Why can’t I end a Bluetooth connection?
A: If another device is connected to your device, you can end
the connection using the other device, or by deactivating
Bluetooth connectivity. Select Connect. > Bluetooth >
Off.
Browser services
Q: What do I do if the following message is displayed: No valid
access point defined. Define one in Web settings.?
A: Insert the correct browser settings. Contact your service
provider for instructions.
Camera
Q: Why do images look smudgy?
A: Remove the protective plastic films covering the display
and camera. Ensure that the camera lens protection
window is clean.
Display
Q: Why do missing, discolored, or bright dots appear on the
screen every time I turn on my device?
A: This is a characteristic of this type of display. Some displays
may contain pixels or dots that remain on or off. This is
normal, not a fault.
R1114_en.book Page 96 Tuesday, January 24, 2006 2:04 PM
Troubleshooting
97
FCC DRAFT
Log
Q: Why does the log appear empty?
A: You may have activated a filter, and no communication
events fitting that filter have been logged. To see all events,
select My own > Log > Options > Filter > All
communication.
Memory low
Q: What can I do if my device memory is low?
A: You can delete the following items regularly to avoid
memory getting low:
• Messages from Inbox, Drafts, and Sent folders in
Messaging
• Retrieved e-mail messages from the device memory
• Saved browser pages
• Images and photos in Gallery
To delete contact information, calendar notes, call timers, call
cost timers, game scores, or any other data, go to the
respective application to remove the data. If you are deleting
multiple items and one of the following notes are shown: Not
enough memory to perform operation. Delete some data
first. or Memory low. Delete some data., try deleting items
one by one (starting from the smallest item).
Q: How can I save my data before deleting it?
A: Save your data using one of the following methods:
• Use Nokia PC Suite to make a backup copy of all data to a
compatible computer.
• Send images to your e-mail address; then save the images
to your computer.
• Send data using Bluetooth connectivity to a compatible
device.
• Store data on a compatible memory card.
Messaging
Q: Why can’t I select a contact?
A: The contact card does not have a phone number or an
e-mail address. Add the missing information to the
contact card in Contacts.
Multimedia messaging
Q: What should I do when the device cannot receive a
multimedia message because memory is full?
A: The amount of memory needed is indicated in the error
message: Not enough memory to retrieve message.
Delete some data first. To view what kind of data you
have and how much memory the different data groups
consume, select File manager > Options > Memory
details.
Q: The note Retrieving message is shown briefly. What is
happening?
A: The device is trying to retrieve a multimedia message from
the multimedia messaging center. Check that the settings
for multimedia messaging are defined correctly and that
there are no mistakes in phone numbers or addresses.
Select Messaging > Options > Settings > Multimedia
message.
R1114_en.book Page 97 Tuesday, January 24, 2006 2:04 PM
Troubleshooting
98
FCC DRAFT
Q: How can I end the data connection when the device starts
a data connection again and again?
A: To stop the device from making a data connection, select
Messaging and one of the following:
On receiving msg. > Defer retrieval—To have the
multimedia messaging center save the message to be
retrieved later, for example, after you have checked the
settings. After this change, the device still needs to send
information notes to the network. To retrieve the message
now, select Retr. immediately.
On receiving msg. > Reject message—To reject all
incoming multimedia messages. After this change, the
device needs to send information notes to the network,
and the multimedia messaging center deletes multimedia
messages that are waiting to be sent to you.
Multimedia reception > Off—To ignore all incoming
multimedia messages. After this change, the device does
not make any network connections related to multimedia
messaging.
PC connectivity
Q: Why do I have problems in connecting the device to my
PC?
A: Make sure that Nokia PC Suite is installed and running on
your PC. See the user guide for Nokia PC Suite on the
CD-ROM. For further information on how to use Nokia PC
Suite, see the help function on Nokia PC Suite or visit the
support pages at www.nokia.com.
Q: Can I use my device as a fax modem with a compatible PC?
A: You cannot use your device as a fax modem. However, with
call diverting (network service), you can divert incoming
fax calls to another phone number.
Q: Why does sending images and videos fail, when I send them
to a compatible PC that has been successfully paired with
my device?
A: The PC may reject the images and videos. Check the manual
of the PC’s operating system for the correct configuration
of PIM settings.
R1114_en.book Page 98 Tuesday, January 24, 2006 2:04 PM
Battery information
99
FCC DRAFT
Battery information
Charging and discharging
Your device is powered by a rechargeable battery. The full
performance of a new battery is achieved only after two or
three complete charge and discharge cycles. The battery can
be charged and discharged hundreds of times but it will
eventually wear out. When the talk and standby times are
noticeably shorter than normal, replace the battery. Use only
Nokia approved batteries, and recharge your battery only with
Nokia approved chargers designated for this device.
Unplug the charger from the electrical plug and the device
when not in use. Do not leave fully charged battery connected
to a charger, since overcharging may shorten its lifetime. If left
unused, a fully charged battery will lose its charge over time.
If the battery is completely discharged, it may take a few
minutes before the charging indicator appears on the display
or before any calls can be made.
Use the battery only for its intended purpose. Never use any
charger or battery that is damaged.
Do not short-circuit the battery. Accidental short-circuiting
can occur when a metallic object such as a coin, clip, or pen
causes direct connection of the positive (+) and negative (-)
terminals of the battery. (These look like metal strips on the
battery.) This might happen, for example, when you carry a
spare battery in your pocket or purse. Short-circuiting the
terminals may damage the battery or the connecting object.
Leaving the battery in hot or cold places, such as in a closed
car in summer or winter conditions, will reduce the capacity
and lifetime of the battery. Always try to keep the battery
between 15°C and 25°C (59°F and 77°F). A device with a hot
or cold battery may not work temporarily, even when the
battery is fully charged. Battery performance is particularly
limited in temperatures well below freezing.
Do not dispose of batteries in a fire as they may explode.
Batteries may also explode if damaged. Dispose of batteries
according to local regulations. Please recycle when possible.
Do not dispose as household waste.
Nokia battery authentication
guidelines
Always use original Nokia batteries for your safety. To check
that you are getting an original Nokia battery, purchase it
from an authorized Nokia dealer, look for the Nokia Original
Enhancements logo on the packaging and inspect the
hologram label using the following steps:
Successful completion of the four steps is not a total
assurance of the authenticity of the battery. If you have any
reason to believe that your battery is not an authentic original
Nokia battery, you should refrain from using it and take it to
the nearest authorized Nokia service point or dealer for
R1114_en.book Page 99 Tuesday, January 24, 2006 2:04 PM
Battery information
100
FCC DRAFT
assistance. Your authorized Nokia service point or dealer will
inspect the battery for authenticity. If authenticity cannot be
verified, return the battery to the place of purchase.
Authenticate hologram
1 When looking at the hologram on
the label, you should see the
Nokia connecting hands symbol
from one angle and the Nokia
Original Enhancements logo
when looking from another angle.
2 When you angle the hologram
left, right, down, and up, you
should see 1, 2, 3, and 4 dots on
each side respectively.
3 Scratch the side of the label to
reveal a 20-digit code, for
example
12345678919876543210. Turn
the battery so that the numbers
are facing upwards. The 20-digit
code reads starting from the
number at the top row followed
by the bottom row.
4 Confirm that the 20-digit code is
valid by following the instructions
at www.nokia.com/batterycheck.
To create a text message, key in the
20-digit code, for example
12345678919876543210, and send to
+44 7786 200276.
National and international operator charges will apply.
You should receive a message indicating whether the code can
be authenticated.
What if your battery is not authentic?
If you cannot confirm that your Nokia battery with the
hologram on the label is an authentic Nokia battery, please do
not use the battery. Take it to the nearest authorized Nokia
service point or dealer for assistance. The use of a battery that
is not approved by the manufacturer may be dangerous and
may result in poor performance and damage to your device
and its enhancements. It may also invalidate any approval or
warranty applying to the device.
To find out more about original Nokia batteries, visit
www.nokia.com/battery.
R1114_en.book Page 100 Tuesday, January 24, 2006 2:04 PM
Care and maintenance
101
FCC DRAFT
Care and maintenance
Your device is a product of superior design and craftsmanship
and should be treated with care. The suggestions below will
help you protect your warranty coverage.
• Keep the device dry. Precipitation, humidity and all types
of liquids or moisture can contain minerals that will
corrode electronic circuits. If your device does get wet,
remove the battery and allow the device to dry completely
before replacing it.
• Do not use or store the device in dusty, dirty areas. Its
moving parts and electronic components can be damaged.
• Do not store the device in hot areas. High temperatures
can shorten the life of electronic devices, damage
batteries, and warp or melt certain plastics.
• Do not store the device in cold areas. When the device
returns to its normal temperature, moisture can form
inside the device and damage electronic circuit boards.
• Do not attempt to open the device other than as instructed
in this guide.
• Do not drop, knock, or shake the device. Rough handling
can break internal circuit boards and fine mechanics.
• Do not use harsh chemicals, cleaning solvents, or strong
detergents to clean the device.
• Do not paint the device. Paint can clog the moving parts
and prevent proper operation.
• Use a soft, clean, dry cloth to clean any lenses (such as
camera, proximity sensor, and light sensor lenses).
• Use only the supplied or an approved replacement
antenna. Unauthorized antennas, modifications, or
attachments could damage the device and may violate
regulations governing radio devices.
• Use chargers indoors.
• Always create a backup of data you want to keep (such as
contacts and calendar notes) before sending your device
to a service facility.
All of the above suggestions apply equally to your device,
battery, charger, or any enhancement. If any device is not
working properly, take it to the nearest authorized service
facility for service.
R1114_en.book Page 101 Tuesday, January 24, 2006 2:04 PM
Additional safety information
102
FCC DRAFT
Additional safety information
Your device and its enhancements may contain small parts.
Keep them out of the reach of small children.
Operating environment
Remember to follow any special regulations in force in any
area and always switch off your device when its use is
prohibited or when it may cause interference or danger. Use
the device only in its normal operating positions.
This device meets RF exposure guidelines when used either in
the normal use position against the ear or when positioned at
least 7/8 inch (2.2 cm) away from the body. When a carry
case, belt clip, or holder is used for body-worn operation, it
should not contain metal and should position the device at
least 7/8 inch (2.2 cm) away from your body.
In order to transmit data files or messages, this device
requires a quality connection to the network. In some cases,
transmission of data files or messages may be delayed until
such a connection is available. Ensure the aboveseparation
distance instructions are followed until the transmission is
completed.
Medical devices
Operation of any radio transmitting equipment, including
wireless phones, may interfere with the functionality of
inadequately protected medical devices. Consult a physician or
the manufacturer of the medical device to determine if they
are adequately shielded from external RF energy or if you have
any questions. Switch off your device in health care facilities
when any regulations posted in these areas instruct you to do
so. Hospitals or health care facilities may be using equipment
that could be sensitive to external RF energy.
Pacemakers Pacemaker manufacturers recommend that a
minimum separation of 15.3 centimeters (6 inches) be
maintained between a wireless phone and a pacemaker to
avoid potential interference with the pacemaker. These
recommendations are consistent with the independent
research by and recommendations of Wireless Technology
Research. Persons with pacemakers should:
• always keep the device more than 15.3 centimeters
(6 inches) from their pacemaker;
• not carry the device in a breast pocket; and
• hold the device to the ear opposite the pacemaker to
minimize the potential for interference.
If you suspect interference, switch off your device and move
the device away.
Hearing aids Some digital wireless devices may interfere
with some hearing aids. If interference occurs, consult your
service provider.
R1114_en.book Page 102 Tuesday, January 24, 2006 2:04 PM
Additional safety information
103
FCC DRAFT
Vehicles
RF signals may affect improperly installed or inadequately
shielded electronic systems in motor vehicles such as
electronic fuel injection systems, electronic antiskid (antilock)
braking systems, electronic speed control systems, and air bag
systems. For more information, check with the manufacturer
or its representative of your vehicle or any equipment that has
been added.
Only qualified personnel should service the device, or install
the device in a vehicle. Faulty installation or service may be
dangerous and may invalidate any warranty that may apply to
the device. Check regularly that all wireless device equipment
in your vehicle is mounted and operating properly. Do not store
or carry flammable liquids, gases, or explosive materials in the
same compartment as the device, its parts, or enhancements.
For vehicles equipped with an air bag, remember that air bags
inflate with great force. Do not place objects, including
installed or portable wireless equipment in the area over the
air bag or in the air bag deployment area. If in-vehicle wireless
equipment is improperly installed and the air bag inflates,
serious injury could result.
Using your device while flying may be prohibited. Switch off
your device before boarding an aircraft. The use of wireless
teledevices in an aircraft may be dangerous to the operation
of the aircraft, disrupt the wireless telephone network, and
may be illegal.
Potentially explosive environments
Switch off your device when in any area with a potentially
explosive atmosphere and obey all signs and instructions.
Potentially explosive atmospheres include areas where you
would normally be advised to turn off your vehicle engine.
Sparks in such areas could cause an explosion or fire resulting
in bodily injury or even death. Switch off the device at
refuelling points such as near gas pumps at service stations.
Observe restrictions on the use of radio equipment in fuel
depots, storage, and distribution areas, chemical plants or
where blasting operations are in progress. Areas with a
potentially explosive atmosphere are often but not always
clearly marked. They include below deck on boats, chemical
transfer or storage facilities, vehicles using liquefied
petroleum gas (such as propane or butane), and areas where
the air contains chemicals or particles such as grain, dust or
metal powders.
Emergency calls
Important: Wireless phones, including this device,
operate using radio signals, wireless networks, landline
networks, and user-programmed functions. Because of
this, connections in all conditions cannot be guaranteed.
You should never rely solely on any wireless device for
essential communications like medical emergencies.
R1114_en.book Page 103 Tuesday, January 24, 2006 2:04 PM
Additional safety information
104
FCC DRAFT
To make an emergency call:
1If the device is not on, switch it on. Check for adequate
signal strength.
Some networks may require that a valid SIM card is
properly inserted in the device.
2Press as many times as needed to clear the display
and ready the device for calls.
3Enter the official emergency number for your present
location. Emergency numbers vary by location.
4Press the key.
If certain features are in use, you may first need to turn those
features off before you can make an emergency call. Consult
this guide or your service provider for more information.
When making an emergency call, give all the necessary
information as accurately as possible. Your wireless device
may be the only means of communication at the scene of an
accident. Do not end the call until given permission to do so.
Certification information (SAR)
THIS DEVICE MEETS THE GOVERNMENT’S REQUIREMENTS
FOR EXPOSURE TO RADIO WAVES.
Your mobile device is a radio transmitter and receiver. It is
designed and manufactured not to exceed the limits for
exposure to radio frequency (RF) energy adopted by the
governments of the USA through the Federal
Communications Commission (FCC) and Canada through
Industry Canada (IC). These limits establish permitted levels of
RF energy for the general population. The guidelines are based
on standards that were developed by independent scientific
organizations through periodic and thorough evaluation of
scientific studies. The standards include a substantial safety
margin designed to assure the safety of all persons, regardless
of age and health.
The exposure guidelines for mobile devices employ a unit of
measurement known as the Specific Absorption Rate or SAR.
The SAR limit adopted by the USA and Canada is 1.6 watts/
kilogram (W/kg) averaged over one gram of tissue. The limit
incorporates a substantial margin of safety to give additional
protection for the public and to account for any variations in
measurements. Tests for SAR are conducted using standard
operating positions with the device transmitting at its highest
certified power level in all tested frequency bands. The actual
SAR level of an operating device can be well below the
maximum value because the device is designed to use only the
power required to reach the network. That amount changes
depending on a number of factors such as how close you are
to a network base station.
The highest SAR value reported to the FCC and IC for this
device type when tested for use at the ear is 0.41W/kg, and
when properly worn on the body is 0.24W/kg. SAR information
on file with the FCC can be found under the Display Grant
section of http://www.fcc.gov/oet/fccid after searching on FCC
ID OW3RM-112. SAR values reported in other countries may
vary depending on differences in reporting and testing
requirements and the network band. Additional SAR
information may be provided under product information at
http://www.nokia.com.
Complete_Safety.fm Page 104 Tuesday, May 23, 2006 11:51 AM
FCC DRAFT
Index
105
Index
A
access points 86
settings 86
activate loudspeaker
with closed cover 51
activation keys 95
alarms
alarm clock 11
applications
installing 93
Java 93
B
backing up 12
Bluetooth 70
connecting two devices, pairing 72
device address 72
headset 92
pairing 72
security 71
switching off 73
bookmarks 57
brightness
display 84
setting in camera 17, 22
C
cache, clearing 59
calendar
create entries 61
synchronizing PC Suite 61
call register
See log
calls
dialled numbers 51
duration 51
international 48
received 51
settings 85
settings for call forwarding 91
transferring 51
camera
adjusting brightness 16, 17, 22
adjusting colour and lighting 18,
23
adjusting flash settings 16
adjusting video recorder settings
23
edit videos 26
flash 18
image setup settings 16, 18, 23
saving video clips 22
self-timer 19
sending images 17
sequence mode 18
still image camera settings 19
certificates 90
chat
See instant messaging
clear screen
See standby mode
clock 11
alarm 11
settings 12
codes 88
lock code
PIN code 89
PIN2 code 89
security code 89
computer connections 74
conference call 48
connection settings 86
contact cards 54
inserting pictures 54
sending 54
storing DTMF tones 51
R1114_en.book Page 105 Tuesday, January 24, 2006 2:04 PM
FCC DRAFT
Index
106
copying
contacts between the SIM card
and device memory 55
copyright protection
see activation keys
D
data connections
details 75
ending 75
indicators 10
date 11
device manager 75
digital rights management, DRM
see activation keys
E
editing videos
adding effects 26
adding sound clips 26
adding transitions 26
custom video clips 26
e-mail 38
automatic retrieving 42
opening 42
remote mailbox 41
retrieving from mailbox 41
settings 45
viewing attachments 42
F
file formats
.jad 93
.jar 93, 94
.sis 93
RealPlayer 31
file manager 13
fixed dialing 55
FM radio 64
G
gallery
ordering files in albums 29
presentations 28
H
handsfree
see loudspeaker
headset settings 92
help application 15
I
indicators 10
instant messaging 66
blocking 68
connecting to a server 67
recording messages 68
sending instant messages 68
Internet
See Web
Internet access points (IAP)
See access points
J
Java
See applications
L
lock code 89
log
erasing contents 52
filtering 52
log duration 52
loopset settings 92
loudspeaker 11
M
mailbox 41
automatic retrieving 42
media files
fast forward 31
file formats 31
mute sound 31
rewind 31
memory
clearing memory 13, 51, 52
viewing memory consumption 13
memory card 12
menu, rearranging 79
messaging
R1114_en.book Page 106 Tuesday, January 24, 2006 2:04 PM
FCC DRAFT
Index
107
e-mail 38
multimedia messages 37
text messages 37
movies, muvees
custom muvees 33
quick muvees 33
multimedia messages 37
music player 63
mute sound 31
P
packet data connections
settings 88
PC connections 74
PC Suite
calendar data 61
synchronization 74
transferring images to a PC 25
transferring music files to your
memory card 63
viewing device memory data 11,
14
personalization 80
phonebook
See contact cards
PIN code 89
profiles 79
R
radio 64
remote mailbox 41
remote SIM mode 71
ringing tones
personal ringing tone 56
receiving in a text message 40
S
security code
See lock code
sending
contact cards, business cards 54
images 17
video clips 28
service commands 36
Services
browser 57
settings
access codes 88
access points 86
Bluetooth connectivity 71
calendar 62
call forwarding 91
call restriction 91
certificates 90
cover display 84
data connections 86
date and time 88
display 84
IM 67, 69
language 83
lock code 89
original settings 84
personalizing the phone 79
PIN code 89
screen saver 84
shortcuts 14
SIM card
copying names and numbers to
phone 55
messages 43
names and numbers 55
sis file 93
snooze 11
software
transferring a file to your device 93
sound clips 25
sounds
muting a ringing tone 50
recording sounds 78
speed dialing 49
standby mode 79
SVG files 28
synchronization 75
T
text messages 37
R1114_en.book Page 107 Tuesday, January 24, 2006 2:04 PM
FCC DRAFT
Index
108
themes 80
time 11
transferring content from another
device 9
U
USSD commands 36
V
video clips 25
video player
See RealPlayer
Visual Radio 64
viewing content 66
visual service ID 66
voice commands 92
voice dialing 49
voice mailbox 48
changing the phone number 16,
48
forwarding calls to voice mailbox
91
voice messages 48
voice tags 92
making calls 49
volume control 11
during a call 48
loudspeaker 11
W
Web
access points, see access points
R1114_en.book Page 108 Tuesday, January 24, 2006 2:04 PM