Microsoft RM-120 CDMA 800/1900 Cellular Phone w/Bluetooth User Manual

Download:
Mirror Download [FCC.gov]
Document ID	671987
Application ID	6p4CrFy7DYJ8l+n+TSDKWA==
Document Description	Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	88.27kB (1103403 bits)
Date Submitted	2006-06-22 00:00:00
Date Available	2006-06-22 00:00:00
Creation Date	2006-06-20 10:59:54
Producing Software	Acrobat Distiller 6.0.1 (Windows)
Document Lastmod	2006-06-20 10:59:54
Document Title	untitled

Nokia 6175i User Guide
FCC DRAFT
Part No. 9250401, Issue No. 1
Copyright ©2006 Nokia. All rights reserved.
Nokia, Nokia Connecting People, Pop-Port, and the Nokia Original Enhancements logos are
trademarks or registered trademarks of Nokia Corporation. Other company and product
names mentioned herein may be trademarks or trade names of their respective owners.
US Patent No 5818437 and other pending patents. T9 text input software Copyright
©1999-2006. Tegic Communications, Inc. All rights reserved.
Bluetooth wireless technology is a registered trademark of Bluetooth SIG, Inc.
Includes RSA BSAFE cryptographic or security protocol software from
RSA Security.
Java is a trademark of Sun Microsystems, Inc.
Nokia operates a policy of continuous development. Nokia reserves the right to make
changes and improvements to any of the products descrived in this document without prior
notice.
UNDER NO CIRCUMSTANCES SHALL NOKIA BE RESPONSIBLE FOR ANY LOSS OF DATA OR
INCOME OR ANY SPECIAL, INCIDENTAL, AND CONSEQUENTIAL OR INDIRECT DAMAGES
HOWSOEVER CAUSED. THE CONTENTS OF THIS DOCUMENT ARE PROVIDED "AS IS." EXCEPT
AS REQUIRED BY APPLICABLE LAW, NO WARRANTIES OF ANY KIND, EITHER EXPRESS OR
IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE, ARE MADE IN RELATION TO
THE ACCURACY, RELIABILITY OR CONTENTS OF THIS DOCUMENT. NOKIA RESERVES THE
RIGHT TO REVISE THIS DOCUMENT OR WITHDRAW IT AT ANY TIME WITHOUT PRIOR NOTICE.
The availability of particular products may vary by region. Check with the Nokia dealer
nearest you. This device may contain commodities, technology, or software subject to export
laws and regulations from the U.S. and other countries. Diversion contrary to law is
prohibited.
Copyright protections may prevent some images, music (including ringing tones), and the
content from being copied, modified, transferred, or forwarded.
FCC/INDUSTRY CANADA NOTICE
Your device may cause TV or radio interference (for example, when using a telephone in close
proximity to receiving equipment). The FCC or Industry Canada can require you to stop using
your telephone if such interference cannot be eliminated. If you require assistance, contact
your local service facility. This device complies with part 15 of the FCC rules. Operation is
subject to the following two conditions: (1) This device may not cause harmful interference,
and (2) this device must accept any interference received, including interference that may
cause undesired operation. Any changes or modifications not expressly approved by Nokia
could void the user’s authority to operate this equipment.
FCC DRAFT
Contents
Contents
Phone at a glance ..................................................................................................................9
Set up your phone ............................................................................................................... 15
Text entry ............................................................................................................................... 21
Messaging ............................................................................................................................. 24
Log ........................................................................................................................................... 40
Contacts ................................................................................................................................. 43
Gallery..................................................................................................................................... 52
Media ...................................................................................................................................... 54
Settings .................................................................................................................................. 65
Organizer................................................................................................................................ 90
Mobile web......................................................................................................................... 102
Extras ................................................................................................................................... 105
Push to talk .........................................................................................................................106
PC connectivity ..................................................................................................................108
Enhancements ................................................................................................................... 109
Battery information ..........................................................................................................111
Index .....................................................................................................................................120
FCC DRAFT
For your safety
For your safety
Read these simple guidelines. Not following them may be dangerous or illegal.
Read the complete user guide for further information.
Switch on safely
Do not switch the phone on when wireless phone use is prohibited or
when it may cause interference or danger.
Road safety comes first
Obey all local laws. Always keep your hands free to operate the
vehicle while driving. Your first consideration while driving should be
road safety.
Interference
All wireless phones may be susceptible to interference, which could
affect performance.
Switch off in hospitals
Follow any restrictions. Switch the phone off near medical
equipment.
Switch off in aircraft
Follow any restrictions. Wireless devices can cause interference in
aircraft.
Switch off when refueling
Do not use the phone at a refueling point. Do not use near fuel or
chemicals.
Switch off near blasting
Follow any restrictions. Do not use the phone where blasting is in
progress.
Use sensibly
Use only in the normal position as explained in the product
documentation. Do not touch the antenna unnecessarily.
Qualified service
Only qualified personnel may install or repair this product.
FCC DRAFT
For your safety
Enhancements and batteries
Use only approved enhancements and batteries. Do not connect
incompatible products.
Water-resistance
Your phone is not water-resistant. Keep it dry.
Back-up copies
Remember to make back-up copies or keep a written record of all
important information stored in your phone.
Connecting to other devices
When connecting to any other device, read its user guide for detailed
safety instructions. Do not connect incompatible products.
Emergency calls
Ensure the phone is switched on and in service. Press the end key as
many times as needed to clear the display and return to the start
screen. Enter the emergency number, then press the call key. Give
your location. Do not end the call until given permission to do so.
■ About your device
The wireless device described in this guide is approved for use on the CDMA 800
and 1900, AMPS 800, and GPS networks. Contact your service provider for more
information about networks.
When using the features in this device, obey all laws and respect privacy and
legitimate rights of others.
When taking and using images or video clips, obey all laws and respect local
customs as well as privacy and legitimate rights of others.
Warning: To use any features in this device, other than the alarm clock,
the device must be switched on. Do not switch the device on when
wireless device use may cause interference or danger.
■ Network services
To use the phone you must have service from a wireless service provider. Many of
the features in this device depend on features in the wireless network to
function. These network services may not be available on all networks or you may
have to make specific arrangements with your service provider before you can
FCC DRAFT
For your safety
utilize network services. Your service provider may need to give you additional
instructions for their use and explain what charges will apply. Some networks
may have limitations that affect how you can use network services. For instance,
some networks may not support all language-dependent characters and services.
Your service provider may have requested that certain features be disabled or not
activated in your device. If so, they will not appear on your device menu. Your
device may also have been specially configured. This configuration may include
changes in menu names, menu order, and icons. Contact your service provider for
more information.
This device supports WAP 2.0 protocols (HTTP and SSL) that run on TCP/IP
protocols. Some features of this device, such as Mobile web, require network
support for these technologies.
■ Shared memory
The following features in this device may share memory: Messaging, Contacts,
Gallery, Organizer, and Extras. Use of one or more of these features may reduce
the memory available for the remaining features sharing memory. For example,
saving many photos to the Gallery may use all of the available memory. Your
device may display a message that the memory is full when you try to use a
shared memory feature. In this case, delete some of the information or entries
stored in the shared memory features before continuing. Some of the features,
such as Messaging and Contacts, may have a certain amount of memory specially
allotted to them in addition to the memory shared with other features.
FCC DRAFT
Welcome
Welcome
Congratulations on your purchase of the Nokia 6175i mobile phone. Your phone
provides many functions which are practical for daily use, such as a handsfree
loudspeaker, camera, music player, video recorder, and more. Your phone can also
connect to a PC, laptop, or other device using a USB data cable or Bluetooth
wireless technology.
■ Register your phone
Make sure to register your phone at www.warranty.nokiausa.com or call
1-888-NOKIA-2U (1-888-665-4228) so that we can serve your needs better if
you need to call a customer center or have your phone repaired.
■ Getting help
Find your phone label
If you need help, the Nokia Care Contact
Center is available for assistance. Before
calling, we recommend that you write down
the following information and have it
available:
• Electronic Serial Number (ESN) or Mobile
Equipment Identity (MEID), depending on
your service provider
• Your zip code (only in the US)
The ESN or MEID is found on the type label, which is located beneath the battery
on the back of the phone. See "Remove the back cover," p. 15 and "Remove the
battery," p. 15.
Check www.nokia.com/support or your local Nokia Web site for the latest
version of this guide, additional information, downloads, and services related to
your Nokia product.
FCC DRAFT
Welcome
Accessibility solutions
Nokia is committed to making mobile phones easy to use for all individuals,
including those with disabilities. For more information visit the Web site at
www.nokiaaccessibility.com.
FCC DRAFT
Phone at a glance
1. Phone at a glance
■ Keys and parts
Front view
Earpiece (1)
Mini-USB port (7)
Display (2)
Microphone (8)
Center selection key (3)
Keypad (9)
Right selection key (4)
Call key (10)
End/power key (5)
Left selection key (11)
Charger port (6)
Scroll key (12)
FCC DRAFT
Phone at a glance
Side view
Retractable antenna (1)
Volume keys (6)
2.5 mm stereo headset port (2)
Push-to-talk key (7)
Camera key (3)
Camera flash (8)
Back cover removal key (4)
Camera lens (9)
Self-portrait mirror (5)
■ Standby mode
Depending on your wireless service provider and the model number of your
phone, some or all of the following selection keys may appear in the standby
mode.
The standby mode indicates your phone is
idle.
Battery level (1)—A filled-in battery indicates
more power.
Names or network operator menu (2)—Press
the right selection key to select this option.
Go to (3)—Press the left selection key to select
this option.
Menu (4)—Press the center selection key to
select this option.
Go to
Menu
Signal strength (5)—More bars indicate a stronger network signal.
10
FCC DRAFT
Names
Phone at a glance
■ Quick keys (shortcuts)
Depending on your wireless service provider and the model number of your
phone, some or all of the following scroll key shortcuts may be available.
In the standby mode, the four-way scroll and center selection keys instantly take
you to frequently-accessed menus:
Scroll up key—Go to the contacts list or network operator menu.
Scroll right key—View the calendar.
Scroll down key—Go to the contacts list.
Scroll left key—Create a text message.
Center selection key—Displays available applications or selects highlighted
menus and submenus.
■ Indicators and icons
To identify the icons on your phone, select Menu > Settings > Phone details >
Icon details.
■ Phone menus
Phone features are grouped according to function and are accessed through the
main menus. Each main menu contains submenus and lists from which you can
select or view items and customize your phone features. To access these menus
and submenus, use the scroll method or use a shortcut.
Some features may not be available, depending on your network. For more
information, contact your wireless provider.
Scroll method
1. Select Menu using the center selection key. Scroll through
the main menu using the scroll key.
On the right side of the screen, a scroll bar is displayed with
a tab that moves up or down as you move through the
menus. This provides a visual representation of your current
position in the menu structure.
2. When you arrive at a menu, press Select (the center selection key) to enter
submenus.
FCC DRAFT
11
Phone at a glance
Select Back from the submenu level to return to the previous menu.
Press the end key to return to the standby mode from any menu or submenu.
Main menu display
You can control whether your phone main menu is displayed as a list or grid.
Select Menu > Options > Main menu view > List or Grid.
If supported by your wireless service provider, you can also change the order of
menus in your main menu.
Select Menu > Options > Organize. Scroll to a menu, and select Move. Scroll to a
new location, and select OK. You can repeat this procedure to customize your
main menu.
Select Done > Yes to save the changes.
In-phone help
Many features have brief descriptions (help text) that can be viewed on the
display. To view these descriptions, scroll to a feature, and wait for about
15 seconds. Scroll down to view all of the description, or select Back to exit.
To view the descriptions, you must activate help text.
Select Menu > Settings > Phone > Help text activation and an option.
■ Security settings
The security feature protects your device from unauthorized outgoing calls or
denies access to the stored information with a lock or security code. The lock
code is a four-digit number, while the security code is a five-digit number. By
default, the security feature uses the lock code (defaulted to the last four digits
of your phone number), instead of the security code.
You must enter your lock code to access the Security menu.
To access the Security menu, do the following:
1. Select Menu > Settings > Security.
2. Enter the lock code, and select OK. See "Security," p. 79.
Depending on your wireless service provider, the preset lock code may be
1234 or 0000 instead of the last four digits of your phone number. If none of
these work, contact your wireless service provider for more help.
12
FCC DRAFT
Phone at a glance
To enter the lock code to restore the factory settings, do the following:
1. Select Menu > Settings > Restore settings.
2. Enter the lock code, and select OK.
Depending on your wireless service provider, your phone may ask for the
security code (defaulted to 12345 or 00000) instead of the lock code.
If you enter the wrong lock code five times in succession, your phone will not
accept your current lock code for 5 minutes. This occurs even if when you power
down the phone between incorrect attempts.
■ Go to functions
The Go to menu allows you to change the function of the left selection key on
your phone so that your most frequently used functions can be quickly accessed
from the Go to menu.
Select options
1. Select Go to > Options > Select options.
2. Scroll to the options you want to add.
3. Select Mark to add an option or Unmark to remove an option.
4. Select Done when you have added all desired options.
5. Select Yes to save the changes.
6. Select Go to to display a list of the options that you selected in step 3.
Organize functions
Select Go to > Options > Organize. Scroll to an option, and select Move. Scroll to
move the option to a new location, and select OK. You can repeat this procedure
to customize your Go to menu.
Select Done > Yes to save the changes.
FCC DRAFT
13
Set up your phone
2. Set up your phone
■ Antenna
Your device has an external antenna. Extend the
antenna fully.
Hold the device as you would any other telephone
with the antenna area pointed up and over your
shoulder.
Note: As with any other radio transmitting device, do not touch the
antenna unnecessarily when the device is switched on.
Contact with the antenna affects call quality and may cause the device
to operate at a higher power level than otherwise needed. Avoiding
contact with the antenna area when operating the device optimizes the
antenna performance and the battery life.
■ Battery
Always switch off the power and disconnect the charger and any other device
before removing the battery. Avoid touching electronic components while
changing the covers. Always store and use the device with the covers attached.
Prolonged, continuous use of your device may increase the device temperature.
The increased temperature is a normal function of this product and does not pose
a safety concern for you or the device. If the temperature is uncomfortable to
you, use a headset or allow your device to return to room temperature before
your next call.
14
FCC DRAFT
Set up your phone
Remove the back cover
1. With the back of the phone facing you, press
down and hold the back cover latch.
2. Slide the back cover toward the bottom of
the phone, lift up, and remove.
Remove the battery
After you have removed the back cover, insert
your finger into the finger grip, and lift the
battery from its compartment.
UIM (CDMA SIM) card slot
Your phone has a UIM card slot built into the mechanics. However, the UIM is not
functional in this phone model. Avoid placing anything into the UIM card slot.
Replace the battery
1. Insert the battery, gold-colored contact
end first, into the battery slot.
2. Push down on the other end of the
battery to snap the battery into place.
Replace the back cover
1. Set the back cover on the phone with
the cover tabs aligned with the slots in
the phone.
2. Press the back cover latch down and
slide the back cover toward the top of
phone.
3. Ensure the back cover latch is secure.
FCC DRAFT
15
Set up your phone
Charge the battery
1. Plug the charger transformer into
a standard wall outlet.
2. Insert the charger output plug (1)
into the round jack at the bottom
end of the phone.
If necessary, you can use a CA-44
adapter cable (2) to connect a
charger and the phone.
After a few seconds, the battery indicator on the display scrolls. If the battery
is completely discharged, it may take a few minutes before the charging
indicator appears on the display or before any calls can be made.
■ Switch your phone on or off
1. To switch your phone on or off, press and hold the
end key for at least three seconds.
2. Enter the lock code, if necessary, and select OK.
■ Connect the headset
A compatible headset, such as the Nokia
HS-9 or HS-49 models, may be purchased
with your phone or separately as an
enhancement. See "Enhancements," p. 79.
1. Move the headset port cover down to
reveal the 2.5 mm stereo headset port.
2. Plug a compatible headset into the
headset port to allow handsfree
operation.
3. Position the headset on your ear.
With the headset connected, you can make, answer, and end calls as usual.
16
FCC DRAFT
Set up your phone
Warning: When you use the headset, your ability to hear outside sounds
may be affected. Do not use the headset where it can endanger your
safety.
■ Make calls
Call using the keypad
1. Enter the phone number (including the area code), and press the call key.
To delete a character to the left of the cursor, select Clear.
2. To end the call, press the end key. To cancel the call attempt, select End call.
Call a stored contact
See "Contacts," p. 42.
Call the last dialed number
1. Press the call key to display the last 30 numbers dialed.
2. Scroll to the number or name you wish to redial, and press the call key.
Make a conference call
Conference calling is a network service that allows you to take part in a
conference call with two other participants.
1. Make a call to the first participant.
2. With the first participant on the line, select Options > Add new call.
3. Enter the phone number of the second participant; or, to retrieve a number
from your contacts, select Search and the number you want to call.
4. Press the call key. The first participant is put on hold.
5. When the second participant answers, press the call key to connect the calls.
6. To end the conference call, select Options > End all calls, or press the end key.
■ Answer calls
You can answer a call when the keypad is locked. When you end or reject the call,
the keypad automatically relocks. See "Keyguard," p. 19.
FCC DRAFT
17
Set up your phone
Answer or silence an incoming call
To answer the call, press the call key or select Answer.
To reject the call, press the end key.
Select Silence to mute the ringing tone. Select Dismiss or do nothing, and the call
is eventually forwarded to voice mail.
If your phone is set to Silent in the Profiles menu, select Dismiss, and the call is
forwarded to voice mail.
Adjust the earpiece volume
Press the up or down arrow on the volume key to adjust the volume of the
earpiece.
When adjusting the volume, a bar chart appears on the display indicating the
volume level.
Mute the phone
To mute your phone during a call, select Mute; to unmute the phone, select
Unmute. When the phone is muted, you can hear the caller but the caller cannot
hear you.
In-call options
Many of the options that you can use during a call are network services. Check
with your wireless service provider for more information.
During a call, select Options and one of the following:
Loudsp. or Normal—Activate or deactivate the loudspeaker while in a call. The
loudspeaker is deactivated automatically when a call or a call attempt ends or
when certain enhancements are connected.
Warning: Do not hold the device near your ear when the loudspeaker is
in use because the volume may be extremely loud.
Add new call—Initiate a conference call. See "Make a conference call," p. 17 for
information.
Save—Save a number entered during a call.
Add to contact—Add a number entered during a call to a contact in your list.
End all calls—Disconnect from all active calls.
18
FCC DRAFT
Set up your phone
Send touch tones—Enter the numbers, and select Tones to send the numbers as
tones.
Contacts—View the contacts list.
Menu—View the phone menu.
■ Send business cards
You can send a business card to a compatible phone or other handheld device.
1. Scroll down to display your list of contacts.
2. Select the contact to which you want to send a business card, and select
Details.
3. Scroll to the phone number for the contact, and select Options > Send bus.
card > Via multimedia, Via text message, or Via Bluetooth.
4. Select Primary number or All details.
5. Enter the number for your recipient, or select Search to retrieve a number
from your contacts; select OK.
If you selected Via Bluetooth > All details, select a Bluetooth device. The
business card is sent to the device.
■ Keyguard
With the keyguard, you can lock the keypad to prevent keys from accidental
keypresses. If the keypad is locked, it unlocks when you receive a call. After the
call, the lock automatically reactivates.
When the keyguard is on, calls may be possible to the official emergency number
programmed into your device.
To lock the keypad when the phone is open, select Menu, and press * within two
seconds.
To unlock the keypad when the phone is open, select Unlock, and press * within
two seconds.
FCC DRAFT
19
Text entry
3. Text entry
You can use two methods for entering text and numbers: standard mode and
predictive text mode.
■ Standard mode
Standard mode is the only way to enter text in the contacts list and to rename
caller groups.
Text (Abc) and numbers (123)
• Press a key once to insert the first letter on the key, twice for the second
letter, and so on. If you pause briefly, the last letter on the display is accepted
and your phone awaits the next entry.
• Press 0 to enter a space and accept a completed word.
• Press 1 as many times as necessary to scroll through a list of commonly used
characters.
• Press and hold * to display a complete list of special characters.
• Press # multiple times to turn predictive text on and off, or to change the
capitalization mode. See "Predictive text mode," p. 21 and "Change case and
mode," p. 22.
• Press and hold # to switch to the number mode. After you type a number,
press and hold # again to return to text mode.
Change language
To change the language, do the following:
1. Press and hold #.
2. In Editor settings, select Writing language and the new language.
The phone returns to the message entry screen, and you can compose in the new
language.
20
FCC DRAFT
Text entry
Punctuation and special characters
While at any text entry screen, press * to display special characters. Press * again
to cycle through all available characters. Scroll to navigate through the list of
special characters. When a character is highlighted, select Insert to insert the
character into your message.
■ Predictive text mode
Predictive text input allows you to write messages quickly using your keypad and
the built-in dictionary. It is much faster than the standard mode method,
because for each letter, you only press the corresponding key on your keypad
once.
Activate and deactivate
At any text entry screen, select and hold Options to turn predictive text on or off
depending on the previous mode; or, select Options > Prediction on or Prediction
off. Press # twice to change from predictive text mode to standard mode and
back.
Enter text
The following illustration simulates your display each time a key is pressed. For
example, to write Nokia with predictive text on and with the English dictionary
selected, press each of the following keys once:
• Press 0 to enter a space and begin writing the next word.
• If a displayed word is not correct, press * to see other matches. To return to
the previous word in the list of matches, select Prev..
• If ? appears after a word, it is not in the dictionary. Select Spell to add the
word to the dictionary.
• Press 1 to insert a period into your message.
• Press and hold * to display special characters. Press * again to cycle through
all available characters.
FCC DRAFT
21
Text entry
• Press and hold the specific number key to enter a number, or press and hold #
to switch to number mode.
■ Change case and mode
Press # to switch between uppercase, lowercase, and sentence case, as well as
standard and predictive text modes. Press and hold # to switch to number mode.
Case and mode are indicated by the following icons that appear in the upper left
of the display screen.
Uppercase text: standard mode is on.
Lowercase text: standard mode is on.
Sentence case text: standard mode is on. This is only available at the
beginning of a sentence.
Uppercase text: predictive text is on.
Lowercase text: predictive text is on.
Sentence case text: predictive text is on. This is only available at the
beginning of a sentence.
123: number mode is on. Enter a number, and press and hold # again
to return to text mode.
■ Delete text
To delete text, use one of the following options:
• Select Clear to backspace the cursor and delete a character.
• Select and hold Clear to backspace continuously and delete characters.
22
FCC DRAFT
Messaging
4. Messaging
Your phone is capable of creating and receiving text, multimedia, voice, and
minibrowser messages. Check with your service provider to see what messaging
is available for you.
■ Text messages
Text messaging is a network service. See "Network services," p. 83. If your
wireless service provider supports this feature, you can send and receive text
messages to compatible phones that are also subscribed to the service.
When composing text messages, check the number of characters allowed in the
top right corner of the message. Using special (unicode) characters takes up more
space. If there are special characters in your message, the indicator may not show
the message length correctly. Before the message is sent, the phone tells you if
the message exceeds the maximum length allowed for one message.
Your device supports the sending of messages beyond the character limit of a
single message. Longer messages are sent as a series of two or more messages.
Your service provider may charge accordingly.
Note: When sending messages, your device may display Message sent.
This is an indication that the message has been sent by your device to the
message center number programmed into your device. This is not an
indication that the message has been received at the intended
destination. For more details about messaging services, check with your
service provider.
Text message folders and options
Select Menu > Messaging > Text messages and from the following:
Create message—Create and send messages.
Inbox—Check for received text messages. Text messages are automatically stored
in the Inbox when they are received. A notification appears when a message
arrives in the Inbox.
Outbox—Check for outgoing text messages. Text messages are automatically
stored in the Outbox as they are sent. If your service is interrupted while sending,
the text message is stored in the Outbox until another delivery attempt is made.
Sent items—Sent text messages are stored in Sent items.
FCC DRAFT
23
Messaging
Drafts—Store drafts of text messages in the Drafts folder to be completed at a
later time.
Archive—Save text messages in Archive.
Templates—Select from a collection of prewritten templates when creating text
messages. Preloaded templates can be edited and customized.
My folders—Create and name personal folders.
Delete messages—Delete messages from a selected folder or all folders.
Message settings—Change settings for reading, writing, and sending text
messages.
Send numeric page—Send a numeric page.
Add-ins—Add a sound, animation, or image.
Write and send text messages
1. Select Menu > Messaging > Text messages > Create message.
To go quickly to the Create message screen, scroll left. Shortcut keys such as
scroll left may be changed by your service provider.
2. Compose a text message using the keypad. See "Text message options," p. 25
for composing options.
3. Select Send to > Recently used, Send to number, Send to e-mail, Send to
many, or Send to distrib. list (if you have created one).
4. Select a number or distribution list, enter the recipient’s phone number or email address, or select Search to retrieve a number or e-mail address from
your contacts list; select Send.
Templates
Templates are short, prewritten messages that can be retrieved and inserted into
new text messages.
1. Select Menu > Messaging > Text messages > Create message > Options >
Use template.
2. Select one of the available templates, and complete the text message using
the keypad.
24
FCC DRAFT
Messaging
Read and reply to text messages
When you receive a text message, a notification appears, and the unopened letter
icon (
) is displayed.
1. Select Show to read the text message or Exit to dismiss the notification.
Scroll to view the whole message, if necessary.
When unopened messages are in your inbox,
corner in the standby mode as a reminder.
is shown in the upper left
2. Select Reply > Empty screen, Original text, Template, or one of the predefined
answers provided.
3. Compose your reply with the keypad, and select Send.
Text message options
Create message options
When you create or reply to a text message, depending on the mode of text input
you are using and the features supported by your wireless service provider, some
or all of the following are available:
Sending options—Mark or Unmark a message as Urgent, Delivery note, Callback
no., or Signature.
Clear text—Erase all text from your message.
Add-ins—Add a sound, animation, or image.
Styles—Change font appearance and size, and text alignment.
Insert contact—Insert a detail from your contacts list into your message.
Insert number—Insert a phone number or find a phone number in the contacts
list.
Save—Save the message in Drafts.
Exit editor—Exit the message editor.
Use template—Insert a predefined template.
Insert word or Edit word—Enter or edit the text of a new word that might not
appear in the predictive text dictionary. This is displayed only when predictive
text is on.
Insert symbol—Insert a special character. This is displayed only when predictive
text is on.
FCC DRAFT
25
Messaging
Predictive text—Choose the language you want to use.
Prediction on or Prediction off—Turn predictive text on or off.
Matches—View matches found in the predictive text dictionary for the word you
want to use. This is displayed only when predictive text is on.
Read message options
When you read a text message, the following options are available:
Delete—Discard the text message.
Message details—View the details of the text message.
Use detail > Number, E-mail address, or Web address—Select Save to create a
new contact; select Options > Add to contact, Send message, or Call for other
options.
Move—Save the message to Archive, Templates, or a folder you have created.
Forward—Forward the text message to another phone number.
Lock or Unlock—Lock or unlock the text message. The appropriate option appears.
Rename—Edit the title of the text message.
Custom folders
Your phone has a folder system that saves and stores text messages. You canalso
create custom folders.
Create a custom folder
To organize your messages, create custom folders, and save messages you want
to keep there.
1. Select Menu > Messaging > Text messages > My folders > Add fold. to create
your initial custom folder.
Select Menu > Messaging > Text messages > My folders > Options > Add
folder to create an additional custom folder.
2. Enter a name for the new folder, and select OK.
Rename a custom folder
1. Select Menu > Messaging > Text messages > My folders.
2. Folders you have created appear on the display. Scroll to the folder you wish
to rename, and select Options > Rename folder.
26
FCC DRAFT
Messaging
3. Select and hold Clear to delete the existing entry; enter a new name for the
folder; select OK to confirm or Back to exit.
Delete a custom folder
Only folders in My folders can be deleted. The Inbox, Outbox, Sent items, Drafts,
Archive, and Templates folders are protected. When you delete a folder, all
messages in the folder are also deleted.
1. Select Menu > Messaging > Text messages > My folders.
2. Scroll to the folder you wish to delete, and select Options > Delete folder.
3. Select Yes to delete or No to exit.
Delete text messages
If your message memory is full and you have more text messages waiting at the
network,
blinks. You can do the following:
• Read some of the unread text messages, and delete them.
• Delete text messages from some of your folders.
Delete a single text message
To delete a single text message, you need to open it first.
1. Select Menu > Messaging > Text messages.
2. Select the folder containing the text message you wish to delete.
3. Select the message you wish to delete and Options > Delete.
4. Select Yes to delete the message or No to exit.
Delete all messages in a folder
1. Select Menu > Messaging > Text messages > Delete messages and one of the
following:
All—Deletes all text messages in the folder.
All read—Deletes only the read text messages in the folder.
All unread—Deletes all unread text messages in the Inbox.
2. If you select All or All read, select Mark or Unmark to choose the folders from
which to delete text messages. Select Options > Mark all to choose all folders.
3. Select Done after choosing the folders.
FCC DRAFT
27
Messaging
4. Select Yes to delete the message or No to exit.
Text message settings
Sending options
Select Menu > Messaging > Text messages > Message settings > Sending
options and the setting you wish to change:
Priority > Normal or Urgent—Select the priority of the message.
Delivery note—Select On to receive a note confirming delivery of a text message.
Send callback number—Select OK to send your default phone number to the
recipient.
Signature—Select On to add a signature to an outgoing text message. If you have
not created a signature, select On; enter a signature, and select OK.
Other settings
Select Menu > Messaging > Text messages > Message settings > Other settings
and the setting you wish to change:
Message overwriting > Sent items only, Inbox only, S. items & Inbox, or Off—Set
your phone to automatically replace old messages in Inbox or Sent items when
new ones arrive. When the message memory is full, your phone cannot send or
receive any new messages.
Save sent messages—Select Always save or Always prompt to save sent text
messages to Sent items. Select Off to not save messages.
Queue msgs. when digital unavailable—Select On or On prompt to store text
messages in the Outbox until they can be sent with a digital service. Select Off to
not store messages.
Auto-playback of sounds—If you have enhanced text messaging, select On or Off
to control sound clips.
■ Multimedia messages
Multimedia messaging is a network service. See "Network services," p. 83. If your
wireless service provider supports this feature, you can send and receive
multimedia messages to compatible phones that are also subscribed to the
service.
A multimedia message can contain text, sound, an image, a video clip, a business
card, a calendar note, and a slide. Your phone supports multimedia messages that
28
FCC DRAFT
Messaging
are up to 600 KB. If the maximum size is exceeded, the phone may not be able to
receive the message.
Note: Only compatible devices that offer multimedia message features
can receive and display multimedia messages. The appearance of a
message may vary depending on the receiving device.
Depending on your network, you may receive a message that includes an Internet
address where you can view the multimedia message. Images are scaled to fit the
display area of the phone. Your phone has a multimedia message viewer for
playing messages and a multimedia inbox for storing saved messages. After you
save the multimedia message, you can use the image as a screen saver or the
sound as a ringing tone.
Copyright protections may prevent some images, ringing tones, and other
content from being copied, modified, transferred, or forwarded.
Multimedia messaging only supports the following formats:
• Images: JPEG, GIF, animated GIF, WBMP, BMP, and PNG
• Sound: MP3, WMA, AAC, AAC+, eAAC, eAAC+, MIDI, AMR-NB, QCELP, and
monophonic ringing tones
• Video: clips in MPEG4, MP4, H.263, and H.264 format with QCIF image size
You cannot receive multimedia messages if you have a call in progress, games or
other applications running, or an active browsing session. Because delivery of
multimedia messages can fail for a variety of reasons, do not rely solely upon
them for essential communications.
Multimedia message folders and options
Select Menu > Messaging > Multimedia messages and from the following:
Create message—Create and send multimedia messages.
Inbox—Check for received multimedia messages. Multimedia messages are
automatically stored in the Inbox when they are received. You receive a
notification when a message arrives in your Inbox.
Outbox—Check for outgoing multimedia messages. Multimedia messages are
automatically stored in the Outbox as they are sent. If your service is interrupted
while sending, messages are stored in the Outbox until another delivery attempt
is made.
Sent items—Sent multimedia messages are stored in Sent items.
Saved items—Save multimedia messages for later use in Saved items.
FCC DRAFT
29
Messaging
Delete messages—Delete multimedia messages from the Inbox, Outbox, Sent
items, or Saved items.
Message settings—Change the settings for multimedia messages.
Write and send multimedia messages
1. Select Menu > Messaging > Multimedia messages > Create message.
2. Scroll to the row you want to select, and select Insert and an option. See
"Multimedia message options," p. 32 for more information on the options.
3. When you have completed adding text or multimedia files to the first row,
repeat step 2 to add additional text or multimedia files to the message.
4. When you have completed adding all text and multimedia files to the
message, select Send.
5. In the To: field, enter the recipient’s phone number, or select Add or one of the
following options:
Recently used—Select a recently used contact.
Contact—Select a contact from the Contacts list.
Distribution lists—Select a distribution list.
Send to album—Send the message to an online album. This is an online
network service. Check with your service provider for more information.
Repeat this step as many times as you want to add multiple contacts.
6. When you have entered all the contacts you want, scroll to the Subject: field,
and enter a subject.
7. Scroll to the Presentation: field, and select Edit.
8. Select Options, and make changes to any option you want. The options affect
the sequence of the attachments and the layout options of the message for
presentation.
9. When you are finished making changes, select Send.
The multimedia message is moved to the Outbox for sending.
The wireless network may limit the size of multimedia messages. If the inserted
image exceeds this limit, the device may make it smaller so that it can be sent by
multimedia messaging.
30
FCC DRAFT
Messaging
It takes more time to send a multimedia message than to send a text message.
While the multimedia message is being sent, the animated indicator
is
displayed, and you can use other functions on the phone. If there is an
interruption while the message is being sent, the phone automatically tries to
resend it a few times. If this fails, the message remains in the Outbox, and you
can try to manually resend it later. Check your Outbox for unsent messages.
Note: When sending messages, your device may display the words
Multimedia message sent. This is an indication that the message has
been sent by your device to the message center number programmed
into your device. This is not an indication that the message has been
received at the intended destination. For more details about messaging
services, check with your service provider.
Messages that you send are saved in the Menu > Messaging > Multimedia
messages > Sent items folder if the setting Save sent messages is set to Yes. See
"Multimedia message settings," p. 34. This is not an indication that the message
has been received at the intended destination.
Read and reply to multimedia messages
When a multimedia message is received,
appears on the display along with
the download progress. When the message has been fully downloaded,
and
a notification appear on the display.
1. To view the multimedia message immediately, select Show.
To save the message to the inbox for later viewing, select Exit.
To view a saved message, select Menu > Messaging > Multimedia
messages > Inbox and the message you want to view.
While viewing a message, select Play to play the entire message.
2. Select Reply or Options > Reply to all, and compose your reply.
3. Select Send.
If
blinks and Multimedia me-mory full. View waiting msg. appears, the
memory for multimedia messages is full. To view the waiting message, select
Show. Before you can save the message, you need to delete some of your old
messages. See "Delete multimedia messages," p. 34.
Important: Exercise caution when opening messages. Multimedia
message objects may contain malicious software or otherwise be
harmful to your device or PC.
FCC DRAFT
31
Messaging
Multimedia message options
Create message options
When you create or reply to a multimedia message, some or all of the following
options are available from the Menu > Messaging > Multimedia messages >
Create message screen:
Insert—Choose from the following options:
• Text—Compose a text message.
• Image—Search the Images or Gallery folders to add an image, or open the
camera to create a new image that you attach to the message.
• Video clip—Search for a video clip, or record a new video clip to be attached
to the message.
• Sound clip—Open the voice recorder to create a new sound clip, or to search
for a new sound clip, to be attached to the message.
Copyright protections may prevent some images, ringing tones, and other
content from being copied, modified, transferred, or forwarded.
• Business card—Insert a contact as a business card.
• Calendar note—Insert a calendar note.
• Slide—Insert a slide into your message. Each slide can contain text, a business
card, a calendar note, one image, and one sound clip.
Send to—Forward the message to another contact or to multiple contacts.
Preview—Preview the message or slide presentation before sending it. Select Stop
to end the preview. Select Play to start the preview again or Back to return to the
list of options.
Remove—Remove the object.
Move slide—Move the slide.
Previous slide—Move to the previous slide.
Next slide—Move to the next slide.
Slide list—View a list of all slides. Select the slide you wish to edit.
Slide timing—Set the timing interval for each slide. By default, each slide appears
for 12 seconds.
Place text first or Place text last—Move text to the top or bottom of the slide. By
default, the text appears at the bottom or last.
32
FCC DRAFT
Messaging
Save—Save the message to Saved items.
Exit editor—Exit the message editor.
Insert smiley—Insert a smiley.
Insert word or Edit word—Enter or edit the text of a new word that might not
appear in the predictive text dictionary. This appears only when predictive text is
on.
Insert symbol—Insert a special character. This appears only when predictive text
is on.
Writing language—Choose the language you want to use.
Prediction on or Prediction off—Turn predictive text on or off.
Matches—View matches found in the predictive text dictionary for the word you
want to use. This appears only when predictive text is on.
Read message options
When you read a multimedia message, the following options are available:
Objects—View all objects attached to the message.
Delete—Delete the message you are viewing.
Use detail—Use a corresponding number or e-mail address. The number or e-mail
address must be highlighted.
Send to—Forward the message to another contact or to multiple contacts.
Edit—Edit the message.
Message details—View the sender’s name and phone number, the message center
used, reception date and time, and message size and type.
Set contrast—Adjust the contrast of an image. This option is only available when
viewing an image.
Details—Display the details of a highlighted file attachment.
Save image, Save sound clip, or Save video clip—Save the corresponding file to
the Gallery. Images, sound clips, and video clips must be opened before you can
save them.
Save link—Save the corresponding Web link. This appears only when a Web link is
highlighted.
Activate image, Activate tone, or Activate video clip—View or listen to the
corresponding file.
Business card—Open an attached business card.
FCC DRAFT
33
Messaging
Calendar note—Open an attached calendar note.
Reply or Reply to all—Enter a reply, and send it to the original sender and any
other recipients of the message.
Album—Forward the message to an online album. This is an online network
service. Check with your service provider for more information.
Delete multimedia messages
If your message memory is full and you have more multimedia messages waiting
at the network,
blinks. You can do the following:
• Read some of the unread multimedia messages, and delete them.
• Delete multimedia messages from some of your folders.
Delete a single multimedia message
1. Select Menu > Messaging > Multimedia messages.
2. Select the folder containing the multimedia message you wish to delete.
3. Select the message you wish to delete and Options > Delete.
4. Select Yes to delete or No to exit.
Delete all multimedia messages in a folder
1. Select Menu > Messaging > Multimedia messages > Delete messages >
Inbox, Outbox, Sent items, or Saved items.
2. Select Yes to delete the all messages in the folder or No to exit.
Multimedia message settings
Select Menu > Messaging > Multimedia messages > Message settings and one
of the following options:
Save sent messages—Select whether you want the multimedia messages that you
send saved in the Sent items folder.
Delivery reports—Request delivery reports to inform you if a message is delivered.
Scale image down—Select whether you want images to be automatically scaled
down.
Default slide timing—Enter the default time for slides in mm:ss format, and select
OK.
34
FCC DRAFT
Messaging
Allow multimedia reception—Specify whether you want to receive a message at
all times or only if you are in the service provider’s home system. This is a network
service. Check with your service provider for more information. Select one of the
following options:
• Yes—Allow all incoming messages.
• In home network—Allow incoming messages only if you are in the service
provider’s home system. This is a network service. Check with your service
provider for more information.
• No—Block all incoming messages.
Incoming multi- media messages—Select how your phone retrieves incoming
multimedia messages. Select one of the following options:
• Retrieve—Sets the phone to automatically retrieve all multimedia messages.
When new messages arrive, you are notified that a multimedia message is
received. If you choose to automatically retrieve messages, you can select
Show to read the multimedia message or Exit to view them in your inbox
later.
• Retrieve manually—Choose the messages you wish to retrieve. When new
messages arrive, you are notified that a multimedia message is available for
retrieval. If you select to manually retrieve messages, select Show to open the
message notification, then Retrieve. Select Exit to save the notification to
your inbox, and retrieve the message later.
• Reject—Sets the phone to reject multimedia messages.
Allow advertisements—Select whether to block or allow advertisements. This
setting is not available if multimedia reception is blocked. This is a network
service. Check with your service provider for more information.
■ Distribution lists
Distribution lists allow you to send text or multimedia messages to a designated
group of people.
Create distribution lists
1. Select Menu > Messaging > Distribution lists > New list.
If you create a second distribution list, select Menu > Messaging >
Distribution lists > Options > Create new list.
FCC DRAFT
35
Messaging
2. Enter a name for the list, and select OK.
3. To add a contact to this list, select Add new, and add the contacts one by one.
A distribution list only contains phone numbers of recipients.
Add and remove contacts
To add contacts, select Menu > Messaging > Distribution lists > the list > Add
new. Add the contacts one by one.
To remove contacts, select Menu > Messaging > Distribution lists > the list >
Options > remove contact name.
Distribution lists
1. Select Menu > Messaging > Distribution lists.
2. Lists you create are displayed. Scroll to the list you wish to modify; select
Options and one of the following:
Create new list—Create a new distribution list.
Send message—Send a message to the distribution list.
Rename list—Rename the distribution list.
Clear list—Clear the distribution list of all current contacts.
Delete list—Delete the distribution list.
■ Voice messages
If you subscribe to voice mail, your wireless provider will give you a voice mailbox
number. You need to save this number to your phone to use voice mail. When you
receive a voice message, your phone beeps, displays a message, or both. If you
receive more than one message, your phone shows the number of messages
received.
Save voice mailbox number
Your wireless provider may have already saved your voice mailbox number to
your phone. If so, the number appears on the display in step 2. Select OK to leave
the number unchanged.
1. Select Menu > Messaging > Voice messages > Voice mailbox number.
36
FCC DRAFT
Messaging
2. If the number is not displayed or incorrect, enter your voice mailbox area code
and number.
3. Select OK.
Set up your voice mail
1. After you save the voice mailbox, press and hold 1.
2. When you connect to voice mail and the prerecorded greeting begins, follow
the automated instructions to set up your voice mail.
Listen to your voice mail
After you set up voice mail, you can dial the number in one of four ways:
• Dial the number using the keypad.
• Press and hold 1.
• Select Listen if there is a notification on the display.
• Select Menu > Messaging > Voice messages > Listen to voice messages.
When you connect and the prerecorded greeting begins, follow the automated
instructions to listen to your voice messages.
Automate voice mail
Voice mail services vary by service provider. The following instructions are
examples of common operations. Check with your service provider for specific
instructions for using your voice mail service.
Write down number and process
1. Write down your voice mailbox number.
2. Call and check your voice mail as you normally would.
3. Write down your interaction with the recorded prompts step-by-step. Note
that each voice mail service may vary. Your steps may resemble the following:
Dial 2145551212, pause for five seconds, press 1, pause for two seconds,
press 1234, and press *.
Be precise; you need this information to setup up voice mail with dialing codes.
FCC DRAFT
37
Messaging
Set up voice mail with dialing codes
You can access your voice mail using 1-touch dialing if you assign your voice
mail number to a number on the keypad. See "Assign a key to 1-touch dialing," p.
48.
■ Minibrowser messages
Minibrowser messaging is a network service. See "Network services," p. 83.
If your wireless service provider supports this feature, you can check for e-mail
messages using the minibrowser. Select Menu > Messaging > Minibrowser
messages > Connect.
To use your phone to access web pages, see "Mobile web," p. 96.
38
FCC DRAFT
Log
5. Log
Log stores information about the last 30 missed, 30 received, or 30 dialed calls. It
also displays the total duration of all calls. When the number of calls exceeds the
maximum, the most recent call replaces the oldest.
When viewing missed, received, or dialed calls, the menu options are the same:
Time of call—Display the date and time of the call.
Send message—Send a message to the number.
Use number—Edit the number and associate a name with the number.
Save—Enter a name for the number and save it to your contacts list.
Add to contact—Add the number to an existing name in your contacts list, if the
number is not associated with a name.
Delete—Clear the number from memory.
Call—Call the number.
■ View missed calls
The missed calls feature does not function when your phone is switched off.
Missed calls are calls that were never answered.
1. Select Menu > Log > Missed calls; if a missed call notification appears, select
List.
2. Scroll to a name or number, select Options, and a menu option.
■ View received calls
Received calls are calls that have been answered.
1. Select Menu > Log > Received calls.
2. Scroll to a name or number, select Options, and a menu option.
■ View dialed numbers
Dialed calls are numbers you have previously dialed from your phone:
1. Press the call key, or select Menu > Log > Dialed numbers.
2. Scroll to a name or number, select Options, and a menu option.
FCC DRAFT
39
Log
■ Time of call
You can make or receive up to five calls to or from the same number and view the
time each call occurred. Your clock must be set for this feature to work
accurately.
1. While viewing a missed, received, or dialed call, select Options > Time of call.
2. Scroll down to view the most recent call times from this number.
3. Select Back to return to the options list.
■ Clear log lists
You can delete any missed, dialed, or received calls from phone memory.
Select Menu > Log > Clear log lists > All call lists, Missed calls, Received calls,
Dialed numbers, or Message recipients.
■ Call timers
Note: The actual invoice for calls and services from your service provider
may vary, depending on network features, rounding off for billing, taxes,
and so forth.
To view the duration of your calls, select Menu > Log > Call timers and one of the
following options:
Last call duration—Check the time of your last call.
Dialed calls' duration—Check the combined time of calls you dialed for either
Home or Roaming.
Received calls' duration—Check the combined time of calls you received for either
Home or Roaming.
All calls' duration—Check the combined time of all calls.
Life timer—Check the total airtime minutes logged on your phone.
Clear timers—Enter your lock code, and select OK to clear all timers on your
phone.
Note: Some timers, including the life timer, may be reset during service
or software upgrades.
40
FCC DRAFT
Log
■ Duration of data or fax calls
Data/fax calls are a network service. See "Network services," p. 83. If your
wireless service provider supports this feature, you can view the size or duration
of sent or received data and fax calls.
Note: The actual invoice for calls and services from your service provider
may vary, depending on network features, rounding off for billing, taxes,
and so forth.
Select Menu > Log > Data/fax calls and one of the following options:
Last sent data/fax—View the size (KB) of the last sent data or fax call.
Last received data/fax—View the size (KB) of the last received data or fax call.
All sent data/fax—View the size (KB) of all sent data and fax calls.
All received data/fax—View the size (KB) of all received data and fax calls.
Duration of last data/fax call—View the duration of the last data or fax call.
Duration of all data/fax calls—View the duration of all calls.
Clear all data/fax logs—Select Yes to clear all data and fax logs.
■ Duration of minibrowser calls
Minibrowser is a network service. See "Network services," p. 83. If your wireless
service provider supports this feature, you can view the size or duration of sent or
received data from the minibrowser.
Note: The actual invoice for calls and services from your service provider
may vary, depending on network features, rounding off for billing, taxes
and so forth.
Select Menu > Log > Minibrowser calls and one of the following options:
Last sent browser data—View the size (KB) of the last sent browser data.
Last received browser data—View the size (KB) of the last received data.
All sent browser data—View the size (KB) of all sent browser data.
All received browser data—View the size (KB) of all received browser data.
Last browser session—View the duration of the last browser session.
All browser sessions—View the duration of all browser sessions.
Clear all browser logs—Select OK > Yes to clear all browser logs.
FCC DRAFT
41
Contacts
6. Contacts
The contacts list can hold up to 500 contacts with multiple numbers and text
notes for each contact. The amount of numbers and text entries that you can
save may vary, depending on length and the total number of entries in the
contacts list.
1. Scroll down to view your contacts.
To search for a contact, scroll down and enter the first letter for the contact
name.
Note: If the right selection key on your phone is Names, you can
select Names > Options > Search in the standby mode.
2. Scroll to the contact, and select Details.
3. Scroll to a phone number, and select Call.
■ Contacts menu options
Select Menu > Contacts and from the following options:
Names—List of contacts currently on your phone. Select Details to view the
contact information. See "Add new contacts," p. 43, "More contact options," p.
45, and "Modify contact settings," p. 46.
Settings—Change your contact settings.
Groups—Assign contacts to caller groups. See "Set up caller groups," p. 46.
1-touch dialing—Assign phone numbers to keys on the keypad. See "Set up 1touch dialing," p. 48.
My number—View the current number assigned to the phone. See "Display phone
number," p. 49.
Delete all contacts—Delete all contacts on your phone. See "Delete contacts," p.
49.
Move contacts—Move contacts to a different storage location.
Copy contacts—Copy contacts to a different storage location.
42
FCC DRAFT
Contacts
■ Add new contacts
Add a contact
1. Enter the phone number you wish to save.
Select Options > Insert pause ('p') to insert a pause code or Options > Insert
wait (’w’) to insert a wait code. See "Insert dialing codes," p. 43 for more
information about dialing codes.
2. Select Save.
Select and hold Options if you want to save the phone number without
adding a name.
3. Enter the last name and first name, verify the phone number is correct, and
select Save.
You can also save a contact by selecting Menu > Contacts > Names > Options >
Add new. Enter the name and phone number, and select Save.
Insert dialing codes
Dialing codes instruct the receiving system to pause, wait, bypass, or accept the
numbers that follow them in the dialing string. Press * repeatedly to cycle
through dialing codes. When the desired code appears on the display, pause
briefly, and the code is inserted into the dialing string.
You can also insert dialing codes into contact numbers, and save the number to a
1-touch dialing location. This is useful for accessing your voice mail. See "Add
new contacts," p. 43 and "Set up 1-touch dialing," p. 48.
The following dialing codes are available:
Bypasses a set of instructions.
Causes the international access code to be replaced by +.
Pauses for 2.5 seconds before sending any numbers that follow.
Waits for you to press the call key before sending the numbers
or codes that follow.
FCC DRAFT
43
Contacts
Add contact details
You can add details to a contact when you are adding a new contact, or when
you are editing an existing contact.
To add details when you are adding a new contact, select Options > Add detail.
See "Add a contact," p. 43.
To add details to an existing contact, scroll to the contact, and select Details >
Options > Add detail. See "Contacts," p. 42.
Select any of the following options:
• Number > General, Mobile, Home, Work, or Fax—Add a new phone number to
the contact. Enter the phone number, and select Save.
The first number you save for any entry is automatically set as the default, but
the default number can always be changed. To change the number type, scroll
to the number, and select Details > Options > Change type > General,
Mobile, Home, Work, or Fax.
• E-mail address—Add the contact’s e-mail address, and select Save.
• Video—Select From Gallery to search for an existing video clip, or select New
video clip to create a new video. The phone plays the video in place of a
ringing tone when the contact calls you.
• Tone—Select Open Gallery to search for a tone in the Gallery. The phone plays
the tone you select when the contact calls you. If you have already selected a
video clip, you cannot select a tone unless you first delete the video from the
contact details.
• Web address—Enter a web address, and select Save.
• Company—Enter the contact’s company name, and select Save.
• Job title—Enter the contact’s job title, and select Save.
• Formal name—Enter the contact’s formal name, and select Save.
• Nickname—Enter the contact’s nickname, and select Save.
• Street address—Enter the contact’s street address (home or work), and select
Save.
• Birthday—Enter the contact’s birth date, and select Save. The Birthday option
is replaced with the birth date you entered.
44
FCC DRAFT
Contacts
• Note—Enter the text for the note, and select Save. The Note option is replaced
with the first 11 characters of the note.
• Image—Select From Gallery to search for an existing image to add to the
contact, or select New image to take a new photo using the camera. The
phone displays the image when the contact calls you.
Change default number
You can change the default number for an existing contact.
1. Scroll down to display your list of contacts.
2. Select the contact for which you want to change the default number and
Details.
3. Scroll to the new default number, and select Options > Set as default.
■ More contact options
After you create a contact and add details to the contact, you have many options
for updating or removing contact details. The type of detail you scroll to in the
contact information list determines what options are available for you to
perform.
1. Scroll down to display your list of contacts.
2. Scroll to a contact, and select Details.
3. Scroll to the contact detail you wish to edit, and select Options.
The following list of options varies depending on the contact detail:
View—View the phone number of the contact.
Add detail—See "Add contact details," p. 44.
Edit—Edit the details currently associated with the contact.
Play voice tag—Play the voice tag assigned to the contact. See "Voice
commands," p. 73.
Change image—Change the image associated with the contact.
Delete—Delete the detail from this contact.
Delete contact—See "Delete contacts," p. 49.
Send message—Create and send a message to the contact. See "Messaging," p.
23.
FCC DRAFT
45
Contacts
Use number—Display the phone number, ready for use.
Set as default—Make the number the default for the contact.
Change type > General, Mobile, Home, Work, or Fax—Change the number type.
Copy number—Copy the phone number.
Go to—Open the web address.
Send bus. card—See "Send business cards," p. 19.
Add to group—See "Set up caller groups," p. 46.
1-touch dialing—Assign the contact to your 1-touch dialing list. See "Set up 1touch dialing," p. 48.
■ Modify contact settings
Select Menu > Contacts > Settings and the setting you wish to change:
Memory in use—Select where you want your contacts stored.
Scrolling view—Select Normal name list, Name and number, Large name list, or
Name and image view.
Name display—Select First name first or Last name first to change how the name
displays in the Contacts list.
Memory status—View the amount of used and available memory.
■ Set up caller groups
You can add contacts to any of five caller groups, and assign a unique ringing
tone or graphic to that group. This enables you to identify callers from the group
by their unique ringing tone or graphic.
Create a new caller group
1. Select Menu > Contacts > Groups.
2. If you have not previously added a caller group, press Select.
If you have previously added a caller group, select Options > Add new group.
3. In the Group name: field, enter a name for the group, and scroll down.
4. In the Group image: field, select Add > From Gallery to search for an existing
image to add to the group profile, or select New image to take a new photo
46
FCC DRAFT
Contacts
using the camera. The phone displays the image when a member of the group
calls you.
5. In the Group tone: field, select Change > Default to select the default ringing
tone, or Open Gallery to search for a ringing tone in the Gallery.
6. Select Save to save the new caller group.
Add or remove contacts from a caller group
You can add or remove contacts from a caller group. You must have already set
up a caller group to use this feature.
Follow these steps to add a contact to a caller group:
1. Scroll down to display your list of contacts.
2. Scroll to a caller group, and select View > Add.
3. Select a contact. The contact is added to the caller group.
Follow these steps to delete a contact from a caller group:
1. Scroll down to display your list of contacts.
2. Scroll to a caller group, and select View.
3. Scroll to the contact you want to remove, and select Options > Remove
member. The contact is removed from the caller group.
Change or delete a caller group
Select Menu > Contacts > Groups and select a group and one of the following
options:
Delete group—Delete the caller group.
Group details—Change the existing caller group details such as the group name,
image, and tone. See "Create a new caller group," p. 46 for more information
about these fields.
■ Voice tags
Voice tags are automatically created for all contacts. Voice tags cannot be edited
or deleted.
Note: Using voice tags may be difficult in a noisy environment or during
an emergency, so you should not rely solely upon voice dialing in all
circumstances.
FCC DRAFT
47
Contacts
Dial using a voice tag
1. Select and hold Names.
2. When you hear several beeps and Speak now appears, release the key.
3. Pronounce the voice tag clearly into the microphone.
When the phone finds the voice tag, a notification appears, and the phone
automatically dials the number. If the phone does not locate a number or
recognize the voice tag, No match found appears.
Play a voice tag
1. Scroll down to display your list of contacts.
2. Scroll to a contact, and select Details.
3. Scroll to the contact name with the voice tag icon next to it, and select
Options.
4. Select Play voice tag.
■ Set up 1-touch dialing
You can associate any entry in your contacts with a key from 2 to 9; to dial those
entries, press and hold the assigned key. You can also assign your voice mail
number to a key to access your voice mail using 1-touch dialing.
Assign a key to 1-touch dialing
1. Select Menu > Contacts > 1-touch dialing.
2. Scroll to any empty slot, and select Assign.
3. Enter the number (including the area code), and select OK; or select Search >
Select to retrieve a number from your contacts and select it.
You can access your voice mail by assigning your voice mailbox number to a
slot. Enter your voice mailbox number, including the area code.
Enter any dialing codes as necessary using the information that you saved
from "Write down number and process," p. 37. See "Insert dialing codes," p.
43 for more information about dialing codes.
4. If necessary, enter the contact name for the number (such as "Voice mail" if
you are assigning the slot for your voice mail), and select Save.
48
FCC DRAFT
Contacts
If 1-touch dialing is off, the phone displays a prompt asking if you want to
activate 1-touch dialing. Select Yes to activate 1-touch dialing.
Change or delete 1-touch dialing numbers
1. Select Menu > Contacts > 1-touch dialing.
2. Scroll to the 1-touch dialing entry you wish to change or delete, and select
one of the following: Options > Change.
3. Select Options, and one of the following:
Change—Change the phone number. Enter the number (including the area
code), and select OK; or select Search > Select to retrieve a number from your
contacts and select it.
Delete > Yes—Delete the key assignment.
■ Display phone number
Select Menu > Contacts > My number to display your phone number.
■ Delete contacts
Delete individual contacts
1. Scroll down to display your list of contacts.
2. Scroll to a contact, and select Options > Delete contact > Yes or No.
Delete all contacts
1. Select Menu > Contacts > Delete all contacts.
2. Enter your security code, and select OK. See "Security," p. 79.
FCC DRAFT
49
Gallery
7. Gallery
You can save images, video clips, recordings, music files, and ringing tones to
folders in the Gallery, and add new folders to the ones already there. You can
download images and tones using multimedia messaging, text messaging, mobile
Internet sites, or Nokia PC Suite.
Your phone supports a digital rights management system to protect content that
you have acquired. A piece of content, such as a ringing tone, can be protected
and associated with certain usage rules, for example, the number of usage times
or a certain usage period. The rules are defined in the content activation key that
can be delivered with the content or separately, depending on the service
provider. You may be able to update these activation keys. Always check the
delivery terms of any content and activation key before acquiring them, as they
may be subject to a fee.
Copyright protection may prevent some images, ringing tones, and other content
from being copied, modified, transferred, or forwarded.
Your phone has about 20 MB of memory for storing files in the Gallery. This
memory is not shared with other functions, such as contacts. If the phone
displays a message that the memory is full, delete some existing files before
proceeding.
■ Open a folder
Select Menu > Gallery to view the folder system. The phone folder system
includes:
Images—By default, camera photos are saved to this folder.
Video clips—By default, camera video clips are saved to this folder.
Graphics—A set of graphics included with your phone are stored here.
Tones—A set of ringing tones included with your phone are stored here.
Recordings—By default, voice recordings are saved to this folder.
Themes—A set of themes included with your phone are stored here.
Your folders—Folders you create appear after the preset folders.
To open a folder, scroll to the folder and select Open. After you open the folder
list and scroll to a file, you can access the file or the options associated with that
file type.
50
FCC DRAFT
Gallery
■ Gallery options
Select Menu > Gallery > Options and one of the following:
Delete folder—Delete a folder you created. You cannot delete a preset folder.
Move—Move the selected folder into another folder. After selecting Move, scroll
to another folder, and select Move to. You cannot move a preset folder.
Rename folder—Rename a folder you created. You cannot rename a preset folder.
Details—Show the name, size, and date of creation of the selected folder.
Type of view—Choose whether to view the folders as a list with details, list only,
or grid.
Sort—Sort the contents of the selected folder by name, date, format, or size.
Add folder—Create a new folder.
Memory status—Check the available memory for the phone.
Mark or Mark all—Allows you to mark Gallery folders to be moved into another
folder. This function only applies to folders you created.
Other options appear depending on the type of files that exist in the folders.
FCC DRAFT
51
Media
8. Media
■ Camera
You can take photos and record video clips with the built-in camera and adjust
its settings. The camera lens is on the back of the phone.
The camera produces photos in JPEG format and video clips in H.263 (QCIF)
format. After you take a photo or record a video, you can attach it to a
multimedia message, save it as a wallpaper, save it to a compatible PC using
Nokia PC Suite software, and upload it to a Web address with the content image
uploader. When you attach an image to a contact, the image is displayed when
the contact calls you.
If there is not enough memory to take a new photo, delete old photos or other
files in the Gallery. See "Gallery," p. 50.
This device supports an image capture resolution of 1600 x 1200 pixels and
displays a 320 x 240 pixel resolution on the display. The image resolutions in
these materials may appear different.
Keep a safe distance when using the flash. Do not use the flash on people or
animals at close range. Do not cover the flash while taking a photo.
When the phone is in the camera mode, the interface switches from portrait to
landscape. Turn the phone on its side to use the camera and view the available
options.
Take a photo
You can use your camera to take photographs. To take a photo, complete the
following steps:
52
FCC DRAFT
Media
1. Press the camera key, or select Menu > Media
> Camera. This activates the camera.
1x
222
If you are in the Video mode, select Options >
Still image to switch to the Still image mode.
2. Press the volume keys or use the scroll keys to
zoom in and out.
Press the camera key or select Capture to take
the photo.
960
When taking a photo, you hear a shutter
Opt.
Capture
Exit
sound. The phone saves the photo in the
Images folder of the Gallery menu. The saved photo is shown on the display.
3. Select Back to take another photo, Delete to erase the photo, or Options and
one of the following:
New image—Return to camera mode.
Send—Select Via multimedia or Via Bluetooth to send the photo to a
compatible phone or PC.
Attach to contact—Attach the photo to a contact.
Rename—Edit the name of the photo.
Open Gallery—Open the Gallery, where photos are saved.
Zoom—Zoom in on a captured photo. Scroll to navigate around the photo.
Set contrast—Scroll to adjust the contrast of the photo.
Edit image—Open the photo for editing. See "Edit photos in the gallery," p. 57.
Print—Print the photo. A PictBridge compatible printer must be attached to
the phone using a USB data cable to print the photo.
Use image > Set as wallpaper, Set as scr. saver, or Set as cont. image—Use the
photo.
Details—View details of the photo.
Self-timer
You can use the camera self-timer to delay taking a photo for approximately
10 seconds.
FCC DRAFT
53
Media
1. Select Menu >Media > Camera > Opt. > Self-timer on.
2. Select Start.
A beep sounds while the self-timer is running, and beeps faster when the
camera is about to capture the photo. After the time-out, the camera takes
the photo and saves it to the Images folder of the Gallery menu.
Take a sequence of photos
You can use the camera image sequence option to take up to four photos in quick
succession.
1. Select Menu > Media > Camera > Opt. > Img. sequence on.
2. Select Sequen..
The camera takes the photos in sequence. After the photos are taken, the
camera saves them to a folder in the Images folder of the Gallery menu.
Record a video
1. Press the camera key, or select Menu > Media > Camera. This activates the
camera. The display is now landscape.
If you are in the Still image mode, select Opt. > Video to switch to the Video
mode.
2. Select Record to begin recording the video clip.
While you are recording, the indicator and the remaining recording time is
shown at the top of the display.
3. Select Pause to pause the recording, Continue to resume the recording, or
Stop to stop the recording.
The phone saves the video clip in the Video clips folder of the Gallery menu.
4. Select Back to take another video clip, Play to play the video clip, or Options
and one of the following:
Delete—Delete the video clip from the Gallery.
New video clip—Return to the Video mode.
Send > Via multimedia or Via Bluetooth—Send the video clip to a compatible
phone or PC.
Rename—Edit the name of the video clip.
54
FCC DRAFT
Media
Open Gallery—Open the Gallery, where video clips are saved.
Mute audio or Unmute audio—Turn the video clip sound on or off.
Set contrast—Use the scroll keys to adjust the contrast of the video clip.
Use video clip > Set as scr. saver, Set as call video, Set as cont. video—Use the
video clip.
Details—View details of the video clip.
Camera options
These options are only available before you take a photo or record a video. See
"Take a photo," p. 52 for information about the options that are available after
you take a photo.
Select Menu > Media > Camera > Opt. and from the following:
Still image or Video—Choose the camera mode to take a photo or record a video.
Mute or Unmute—Turn the sound on or off for the video clip. This option only
appears when the camera is in the Video mode.
Night mode on or Night mode off—Switches the camera night mode on and off.
Flash on or Flash off—Turns the camera flash on and off.
Self-timer on or Self-timer off—Turns the self-timer on and off. This option only
appears in the Still image mode.
Img. sequence on or Img. sequence off—Turns image sequencing on or off. The
images are then saved to the gallery. This option only appears in Still image
mode.
Effects—Select a special color effect to apply to the photo or video. The feature
you select remains the default until you end the camera session.
White balance—Adjust the color balance of a photo to compensate for the
ambient lighting (existing lighting in a photo). Choose from one of the following
options:
• Auto—Adjust the white balance automatically.
• Daylight—Adjust the white balance based on daylight (outdoor) ambient
light.
• Tungsten—Adjust the white balance based on tungsten (indoor) ambient
light.
FCC DRAFT
55
Media
• Fluorescent—Adjust the white balance based on fluorescent (indoor) ambient
light.
• Horizon—Adjust the white balance based on the horizon ambient lighting.
View previous—View the previous photo or video taken. This option only appears
if a photo has been taken but the photo has not been saved.
Open Gallery—Open the Gallery to view saved images, videos, and recordings.
Settings—Change the settings for the phone camera.
Camera settings
Select from the following camera settings found in the Menu > Media >
Camera > Opt. > Settings menu:
Image quality—Select the default file compression when saving the image. Highquality images have less file compression and provide the best image quality, but
take more memory.
Image size—Set the size of an image when taking a photo. A larger image has
better resolution, but takes more memory.
Video clip length—Change the maximum length of a video clip. The maximum size
of a video clip can be 600 KB. A recording stops when it reaches the maximum
size, even if the maximum length is set longer. Only video clips that are default
length or shorter can be sent in a multimedia message.
Video clip quality—Change the maximum length of a video clip. The maximum
size of a video clip can be 600 KB. A recording stops when it reaches the
maximum size, even if the maximum length is set longer. Only video clips that are
default length or shorter can be sent in a multimedia message.
Video resolution—Change the resolution of a video clip.
Image preview time—Select the amount of time an image preview is shown on
the camera display. Select End manually if you want to preview the image until
you select another option. Select No preview if you do not want to preview any
images.
Camera sounds—Turn the camera sounds that happen when a photo is taken or
video recorded on or off.
Self-timer lights—Turn the self-timer lights on or off that appear when a photo is
taken on or off.
56
FCC DRAFT
Media
Default title—Change the default title your phone uses to assign names to new
photos and video clips. If you select My title, enter the text to use as a base for
file names the phone creates.
Default mode—Change the default mode of your phone camera to Standard
photo mode or Video mode.
■ Edit photos in the gallery
1. Select Menu > Gallery, and open a folder and an image file.
2. Select Options > Edit image > Options and one of the following options:
Insert text—Insert text into the image. Enter the text you want to insert, and
select OK. After you enter the text, select Options > Font style, Font size, Font
color, or Rotate to modify the text.
Insert frame—Insert a frame around the image.
Insert clip-art—Insert clip-art into the image.
Insert image—Insert another image into the image. Open a folder, and select
the image you want to insert.
Crop image > Portrait size or Adjustable size > Crop—Crop the image.
3. Scroll to move an inserted frame, clip-art, image, or text.
■ Media player
With Media player you can download, view, and play compatible images, audio
and video files, and animated images from a variety of sources. Media player
plays streaming videos and audio from a network server. Streaming is a network
service and requires network support. Check the availability of these services,
pricing, and tariffs with your network operator or the service provider whose
service you wish to use. Service providers also give you instructions on how to use
their services. Select Menu > Media > Media player and one of the following:
Online media—Connect to the operator’s network. This is a network service.
Open Gallery—Open the Gallery. From the Gallery, you can play stored audio and
video files. See "Gallery," p. 50.
FF/Rew interval—Choose the interval at which a video clip fast forwards or
rewinds.
FCC DRAFT
57
Media
■ Music player
Your phone includes a Music player for listening to music or other tracks in MP3
or AAC format. You can transfer files from a PC to your phone using a USB data
cable or a Bluetooth wireless technology connection. To transfer music tracks
from a compatible PC and manage the music tracks and track lists, see the
instructions for the Nokia Audio Manager application in the Nokia PC Suite
online help. See "USB data cable transfer," p. 77 and "Bluetooth connectivity," p.
74 for more information on transferring music tracks to your phone.
Music files stored in the Music files folder of the Gallery are automatically
detected and added to the default playlist. Music files stored elsewhere must be
defined in a track list before you can listen to them. You can listen to the sound
files through a compatible headset or the phone loudspeaker. You can make or
answer a call while using Music player. During a call, the playback is paused.
When the call ends, Music player restarts where it left off.
Warning: Listen to music at a moderate level. Continuous exposure to
high volume may damage your hearing.
Play music tracks
Select Menu > Media > Music player. If there are no music files in the Music files
folder, you can select another folder before opening the Music player. The details
of the first track on the default track list are shown.
To use the graphical keys,
right to the desired key, and select it.
Play track—To play a track, select
, or
, on the display, scroll left or
Adjust volume—To adjust the volume level, use
the volume key or the left and right selection
keys.
Stop track—To stop the playing, select
press and hold the end key.
or
Skip tracks—To skip to the beginning of the next
track, select
. To skip to the beginning of the
previous track, select
twice.
Rewind or fast forward—To rewind the current
track, select and hold
. To fast forward the
current track, select and hold
. Release the key at the position you want.
58
FCC DRAFT
Media
Music player options
Select Music files or another music folder, Options and one of the following:
Play via Bluetooth—Make a connection to an audio enhancement using
Bluetooth connectivity.
Track list—View all the tracks available on a track list. To play a track, scroll to the
track, and select Play. Select Options > Send to send the music file. Select
Options > Refresh all tracks to refresh the track list (for example, after adding
new tracks to the list). Select Options > Change track list to change the track list
that is shown when you open the Music player menu, if several track lists are
available in the phone.
Play options—Select Random to play the tracks on the track list in random order.
Select Repeat to play the current track or the entire track list repeatedly.
Media equalizer—The equalizer enhances the sound quality when using a headset
(only) with the Music player by amplifying or attenuating frequency bands. There
are five preset equalizer settings (Normal, Pop, Rock, Jazz, and Classical) and two
customizable settings.
Headset or Loudspeaker—With the headset attached you can toggle between
listening to the Music player through a headset or the loudspeaker. When using a
compatible headset, to skip to the next track, press the headset key quickly. To
stop the playing, press and hold the headset key.
Warning: When using the stereo headset your ability to hear outside
sounds may be affected. Do not use the stereo headset where it can
endanger your safety.
Send > Via multimedia or Via Bluetooth—Send music files to a compatible device.
Memory status—View used and free memory.
■ Radio
Your phone has an FM radio that also functions as an alarm clock radio. You can
listen to the FM radio on your phone through the handsfree speaker
enhancement or with a headset. For FM stereo, connect a compatible music
stand or stereo headset to the connector on the bottom of the phone or connect
a 2.5 mm headset to the headset port on the side of the phone.
The FM radio depends on an antenna other than the wireless device antenna. A
compatible headset or enhancement needs to be attached to the device for the
FM radio to function properly. The quality of a radio broadcast depends on
coverage of the radio station in that particular area.
FCC DRAFT
59
Media
Warning: Listen to music at a moderate level. Continuous exposure to
high volume may damage your hearing.
Play radio
With an enhancement or headset connected, select Menu > Media > Radio. The
Radio turns on and plays the last radio frequency you used.
To use the graphical keys,
right to the desired key, and select it.
, or
, on the display, scroll left or
Channel search—To start a channel search, select
and hold
or
. To change the radio
frequency in 0.1 MHz steps, briefly press
or
Switch off—Press and hold the end key to turn off
the radio.
Adjust volume—To adjust the volume level, use
the volume key.
Save channel—To save the channel to a memory
location 1 to 9, press and hold the corresponding
number key. To save a channel to a memory
location 10 to 20, briefly press 1 or 2, then press
and hold the desired number. Enter the name of the channel, and select OK.
Select channel—To select to a channel, select
or
. To go directly to a
saved channel, briefly press the corresponding number keys.
When an application using a browser connection is sending or receiving data, it
may interfere with the radio.
When you place or receive a call, the radio automatically mutes. When the call
ends, the radio switches back on.
Radio options
Select Menu > Media > Radio. The radio turns on. Select Options and one of the
following:
Turn off—Turns off the radio.
Save station—Enter a name for the channel, and select OK. Select one of 20
locations to save the channel location.
60
FCC DRAFT
Media
Stations—Select from a list of saved channels on your phone. Select Options >
Delete station to clear channels or Options > Rename to rename channels.
Mono output or Stereo output—Listen to the radio in monaural mode or in stereo
(default). Stereo output is available through a stereo enhancement.
Headset or Loudspeaker—With the headset attached, listen to the radio through
a headset or the loudspeaker.
Set frequency—Manually enter the frequency of a known radio station, and select
OK. Press * to set a frequency.
■ Recorder
Recorder allows you to make a short (up to 3 minutes) recording and save it to
the Recordings folder or another folder in the Gallery. The recorder cannot be
used when a data call or GPRS connection is active.
Record speech or sound
1. Select Menu > Media > Recorder.
2. To start the recording, select the record button on the display.
3. Hold the phone in the normal position near your ear, and record your
message.
4. When you are finished recording, select the stop button on the display.
The recording is given a default name and saved to the Recordings list. The
default location of the Recordings list is the Recordings folder in the Gallery.
After you make a recording, select Play last recorded to replay the recording and
Send last recorded > Via Bluetooth or Via multimedia to send the recording to a
compatible phone. These options are only available during the current recording
session.
Recording list
1. Select Menu > Media > Recorder > Recordings list.
2. Navigate through the Recordings folder, and select a recording you want to
modify.
3. Select Open to open and play the recording or Options to use the Gallery
options.
FCC DRAFT
61
Media
■ Equalizer
The equalizer enhances the sound quality when using Music player by amplifying
or attenuating frequency bands. There are five preset equalizer settings (Normal,
Pop, Rock, Jazz, and Classical) and two customizable settings.
Activate an equalizer set
Select Menu > Media > Equalizer, and scroll to the desired equalizer setting, and
select Activate. Select Options > View to display the equalizer settings.
Create a custom equalizer set
1. Select Menu > Media > Equalizer.
2. Scroll to a customizable setting, and select Options > Edit.
The selected set appears on the display with the bar on the far left
highlighted. The bars adjust frequencies, from the lowest (the far left bar) to
the highest (the far right bar). The higher the indicator on a particular bar, the
more that frequency is amplified.
3. To adjust the lowest frequency, scroll up and down to move the indicator on
the bar.
4. To adjust other frequencies, scroll right and left to move to the other bars.
5. Repeat steps 3 and 4 to adjust the setting for each frequency.
6. When you are finished, select Save.
7. To rename the setting, select Options > Rename, enter a new name, and
select OK.
8. To activate the setting, select Activate.
62
FCC DRAFT
Settings
9. Settings
Use the Settings menu to change profiles, display settings, themes, tone settings,
time and date settings, call settings, phone settings, voice commands,
connectivity, enhancements, security settings, application settings, network
settings, network services, restore factory settings, and view phone details.
■ Profiles
Profiles define how your phone reacts when you receive a call or message, how
your keypad sounds when you press a key, and more. Ringing options, keypad
tones, and other settings for each of the available profiles can be left at their
default setting, or customized to suit your needs. The following profiles are
available: Normal, Silent, Meeting, Outdoor, and two customizable profiles.
Profiles are also available for enhancements such as a headset and car kit. See
"Enhancements," p. 79.
Activate a profile
Select Menu > Settings > Profiles > Normal, Silent, Meeting, Outdoor, or custom
profile > Activate.
Customize a profile
To modify a profile, do the following:
Select Menu > Settings > Profiles > Normal, Silent, Meeting, Outdoor, or custom
profile > Customize > and a profile option. You cannot rename the Normal
profile. To customize profile tones, see "Tones," p. 67.
Set a timed profile
Timed profiles can be used to prevent missed calls. For example, suppose you
attend an event that requires your phone be set to Silent before the event starts,
but you forget to return it to Normal until long after the event. A timed profile
can prevent missed calls by returning your phone to the default profile at a time
you specify.
To set a timed profile, do the following:
FCC DRAFT
63
Settings
1. Select Menu > Settings > Profiles > Normal, Silent, Meeting, Outdoor, or
custom profile > Timed.
2. Enter the time for the profile to expire, and select OK.
Timed profiles can be set up to 24 hours in advance.
■ Main display settings
Standby mode settings
Active standby
You can change the options that are shown when the phone is in the standby
mode.
1. Select Menu > Settings > Main display > Standby mode settings > Active
standby > My active standby > Options.
2. Select one of the following options:
Personalize view—Select items that you want to appear on the display when
the phone is in the standby mode.
Scroll to an empty slot, and select Assign. Select an option that you want to
appear on the display in the standby mode. When you are finished selecting
options, select Done. Select Yes to save your changes.
Move content—Rearrange your personalized active standby items.
Scroll to a menu item, and select Move. Scroll up or down to select the new
location, and select OK.
Enabling standby—To select how you want to activate the active standby
mode, select Navigation key up, Navigat. key down, or Nav. key up/down.
3. To turn off the Active standby mode, select Menu > Settings > Main display >
Standby mode settings > Active standby > Off.
Wallpaper
You can set your device to display a background image (wallpaper).
1. Select Menu > Settings > Main display > Standby mode settings > Wallpaper
> Wallpapers.
2. Select one of the following:
64
FCC DRAFT
Settings
Image—Browse your selected folder containing the graphic or image of your
desired wallpaper, and select the graphic.
Slide set—Browse to a folder containing the images you want to designate as
the slide set for your wallpaper. All images in the selected folder rotate as
wallpaper slides.
Open Camera—Select Capture > Set to take a photo and set it as the
wallpaper.
3. To activate or deactivate wallpaper, select Menu > Settings > Main display >
Wallpaper > On or Off. If you deactivate the wallpaper and reactivate it, the
last graphic you selected as wallpaper is activated.
4. To select a set of images to rotate as wallpaper slides, select Slide set >
Images.
Font color
You can set font color of your phone when in the standby mode.
1. Select Menu > Settings > Main display > Standby mode settings > Standby
mode font color, and select a font color.
2. Scroll to select a color from the color grid.
Navigation key icons
You can set whether the navigation key icons are displayed while in the standby
mode. Select Menu > Settings > Main display > Standby mode settings >
Navigation key icons > On or Off.
Screen saver
Select Menu > Settings > Main display > Screen saver > On, Off, Screen savers, or
Time-out.
If you selected Screen savers, select Image, Slide set, Video clip, Open Camera,
Analog clock, or Digital clock. If prompted, select the folder where the file is
located, and select the file.
If you selected Time-out, enter the amount of time you want the screen saver to
time out, and select OK.
FCC DRAFT
65
Settings
Power saver
To turn the power saver on and off, select Menu > Settings > Main display >
Power saver > On or Off.
Banner
Banner is a network service. If your network operator supports this feature, you
can choose whether the display shows the operator logo when the phone is in the
standby mode. Select Menu > Settings > Main display > Banner > Default or
Customize.
Backlight time-out
You can choose how long to set the backlights on. Select Menu > Settings > Main
display > Backlight time-out > Default or Customize (to enter the time-out
ranging from 15 seconds to 5 minutes).
■ Mini display settings
Wallpaper
You can set your device to display a background image (wallpaper).
1. Select Menu > Settings > Mini display > Wallpaper > Wallpapers.
2. Select one of the following:
Image—Browse to the folder containing the graphic or image of your
desired wallpaper, and select the graphic.
Slide set—Browse to the folder containing the images you want to designate
as the slide set for your wallpaper. All images in the selected folder rotate as
wallpaper slides.
Open Camera—Select Capture > Set to take a photo and set it as the
wallpaper.
3. To activate or deactivate wallpaper, select Menu > Settings > Mini display >
Wallpaper > On or Off. If you deactivate the wallpaper and reactivate it, the
last graphic you selected as wallpaper is activated.
Screen saver
Select Menu > Settings > Mini display > Screen saver > On, Off, Screen savers, or
Time-out.
66
FCC DRAFT
Settings
If you selected Screen savers, select Image, Slide set, Analog clock, Digital clock,
or Open Camera. If prompted, select the folder where the file is located, and
select the file.
Power saver
To turn the power saver on and off, select Menu > Settings > Mini display >
Power saver > On or Off.
■ Themes
Themes allows you to personalize the ringtone, screen saver, and background on
your phone. Select Menu > Settings > Themes > Select theme > Themes, a
theme, and Apply.
■ Tones
You can adjust the ringing volume, keypad tones, and more for the active
profile.Select Menu > Settings > Tones. Scroll up or down to the field you want
to change:
Incom. call alert:—Select how your phone alerts you when there is an incoming
call: Ringing, Ascending, Ring once, Beep once, or Off.
Ringing tone:—Select Change > Open Gallery > Tones to select the ringing tone
for incoming calls.
Ringing volume:—Scroll left and right to set the volume of your ringing tone.
Incom. call video:—Select Change > Open Gallery, the folder containing the video
clip, and Yes.
Vibrating alert:—Select On to activate the vibrating call alert.
Msg. alert tone:—Select the alert tone for incoming messages: Off, Standard,
Special, Beep once, Long & loud, or Ringing tone.
Keypad tones:—Scroll left and right to set the volume of your keypad tones (or
turn them off).
Other tones:—Turn notification tones on or off.
App. tones:—Turn application tones (such as game tones) on and off.
Alert for:—Set the phone to alert only when a member of a selected caller group
calls. See "Set up caller groups," p. 46.
FCC DRAFT
67
Settings
■ Time and date
Select Menu > Settings > Time and date and from the following options:
Clock—Set the phone to show the clock in the standby mode, adjust the clock,
and select the time zone and the time format.
Date—Set the phone to show the date in the standby mode, set the date, and
select the date format and date separator.
Auto-update of date & time (network service)—Set the phone to automatically
update the time and date according to the current time zone.
■ Call
Select the following options from the Menu > Settings > Call menu.
Location info sharing
You can set your phone to always have the GPS signal activated, or to only
activate the GPS signal when you make a call to the emergency serivces. Select
Location info sharing > Emergency or On.
GPS should not be used for precise location measurement, and you should never
rely solely on location data from the GPS receiver.
This feature is not designed to support positioning requests for related calls.
Contact your service provider for more information about how your phone
complies with government regulations on location-based emergency calling
services.
Anykey answer
When Anykey answer is on, briefly press any key except the right selection or end
key to answer a call. Select Anykey answer > On or Off.
Automatic redial
Occasionally, your network may experience heavy traffic, resulting in a fast busy
signal when you dial. With automatic redial activated, your phone redials the
number, and notifies you when the network is available. Select Automatic
redial > On or Off.
68
FCC DRAFT
Settings
1-touch dialing
To activate or deactivate 1-touch dialing, select 1-touch dialing > On or Off. See
"Set up 1-touch dialing," p. 48.
Answer when fold is opened
Set your phone to answer a call when you open the fold. If the setting is off, you
must press the call key after you open the fold. Select Answer when fold is
opened > On or Off.
Automatic update of service
If supported by your wireless service provider, this feature allows you to set your
phone to automatically receive updates from your network that may improve
service and coverage. Select Automatic update of service > On or Off.
Calling card
If you use a calling card for long distance calls, you can save the calling card
numbers in your phone. Your phone can store up to four calling cards.
Save information
1. Select Calling card.
2. Enter your security code or lock code, and select OK. See "Security," p. 79.
3. Scroll to one of the four memory locations, and select Options > Edit >
Dialing sequence.
4. Select one of the following sequence types:
Access no.+ phone no.+ card no.—Dial the access number, the phone number,
and the card number (and PIN, if required).
Access no.+ card no.+ phone no.—Dial the access number, the card number
(and PIN, if required), and phone number.
Prefix+ phone no.+ card no.—Dial the prefix (numbers that must precede the
phone number), the phone number you want to dial, and the card number
(and PIN, if required).
5. Enter the required information (access number or prefix and card number),
and select OK to confirm your entries.
6. Select Card name.
FCC DRAFT
69
Settings
7. Enter the card name, and select OK.
Contact your calling card company for more information.
Make calls
After you have saved your calling card information in your phone, you can make a
call using your calling card.
1. Select Calling card.
2. Enter your security code or lock code, and select OK.
3. Scroll to the calling card of your choice, and select OK.
4. Press the end key to return to the standby mode; then enter the phone
number, including any prefix (such as 0 or 1) that your calling card may
require when you make a calling card call. See your calling card for
instructions.
5. Press and hold the call key for a few seconds until Card call is displayed.
6. When you hear the tone or system message, select OK.
International prefix
If supported by your service provider, you can store an international prefix into
your phone. When you enter + at the beginning of a phone number, your phone
automatically inserts the international prefix that you have stored.
1. Select International prefix.
2. Enter the international prefix (for example, 0011), and select OK.
3. Enter + and the phone number you want to call (for example, +3546789).
The phone dials the international prefix you have stored in your phone and
the phone number you have entered. For example, the phone dials
0011354789.
Data and fax calls
Receive data or fax calls
Data/fax calls is a network service. See "Network services," p. 83.
If your wireless service provider supports this feature, you can set up the phone to
send or receive data or fax calls when connected to a device, such as a PDA or PC.
70
FCC DRAFT
Settings
For better performance during data calls, place the phone on a stationary surface.
Do not move the phone by holding it in your hand during a data call.
For more information on connectivity, refer to the PC/PDA Connectivity Guide.
The PC/PDA Connectivity Guide can be downloaded from the Nokia website at
www.nokiausa.com.
1. Select Data/fax calls > Incoming data/fax call and one of the following:
Normal—The phone receives incoming calls as usual.
Data calls only—The phone receives only data calls.
Fax calls only—The phone receives only fax calls.
2. If you selected Data calls only or Fax calls only, select Via cable or Via
Bluetooth.
3. When you are finished receiving the fax or data call, repeat steps 1 and 2 (if
necessary), and select Normal.
View data transfer
You can view the transmission speed when sending or receiving data or fax calls.
Select Data/fax calls > Data rate display > Graphic or Off.
Call summary
Your phone can display the time spent on a call when you hang up. Select Call
summary >On or Off.
Show all time on display
Your phone can display the call time during the phone call. Select Show call time
on display > On or Off.
Ringing tone for no caller ID
You can select a different ringing tone for calls received with no caller ID or with
a restricted number.
Select Ringing tone for no caller ID > On or Off. See "Customize a profile," p. 63
for more information on selecting a ringing tone.
■ Phone
Select Menu > Settings > Phone to access the following options.
FCC DRAFT
71
Settings
Language settings
Phone language allows you set the language of the display text seen on the
phone. Select Language settings > Phone language and the language of your
choice.
Voice playback language allows you to set the language for voice playback. Select
Menu > Settings > Phone > Language settings > Voice playback language and
the language of your choice.
Navigation key
If supported by your wireless service provider, you can set the features that are
activated when you press the scroll key.
1. Select Navigation key.
2. Scroll to the arrow you want to change, and select Change.
3. Select a function to assign to the action.
Memory status
You can view the memory usage of your phone. Some or all of the following
options are available on your phone. Select Memory status and a memory option.
Free memory shows the amount of phone memory available for file storage.
Security keyguard
If supported by your wireless service provider, Automatic keyguard controls
whether the security keyguard is on or off. Select Menu, and press *. The keyguard
is locked. To unlock the keyguard, select Unlock, and press *.
Touch tones
Touch tones are the tones that sound when you press the keys on your phone
keypad. You can use Touch tones for many automated dial-up services such as
banking and airlines or for entering your voice mailbox number and password.
Touch tones are sent during an active call. You can send them manually from your
phone keypad, or send them automatically by saving them in your phone.
Set type
Select Manual touch tones and one of the following:
Continuous—The tone sounds for as long as you press and hold a key.
72
FCC DRAFT
Settings
Fixed—Set tones to the duration you specify in the Touch tone length option.
Off—Turn off tones. No tones are heard when you press a key.
Set length
You can also specify touch tone length when using the Fixed option. Select Touch
tone length > Short (0.1 seconds) or Long (0.5 seconds).
Start-up tone
If the Start-up tone is activated, the tone sounds when you switch on your phone.
Select Start-up tone and an option.
Help text activation
Your phone displays brief descriptions for most menu items. When you arrive at a
feature or menu, pause for about 15 seconds, and wait for the help text to
display. Scroll through the full help text, if necessary. Select Help text
activation and an option.
■ Voice commands
You can set up Voice commands, for handsfree operation of certain phone
features. Select Menu > Settings > Voice commands to access the following
options.
Add or remove voice tags
Before using Voice commands, you must first add a voice tag to the phone
function. Select Options > Add all or Remove all to add or remove all voice tags.
The voice tag icon
appears next to the function options for which you added
a voice tag.
Play or edit voice tags
Select a menu option, and select a voice tag, Select Playback to listen to the voice
tag, or Options to select an edit or remove voice tag option.
Use voice commands
After you activate voice commands, you can issue a command by speaking the
voice tag.
FCC DRAFT
73
Settings
1. Select and hold Names.
2. When Speak now appears, pronounce the voice tag clearly into the
microphone.
When the phone finds the voice command tag, Found: appears, and the phone
plays the recognized voice tag through the earpiece. The function you requested
is activated.
■ Connectivity
You can connect the phone to a compatible PC using a USB data cable. You can
also use the phone as a modem to enable connectivity from the PC.
For more information, see the Nokia PC Suite online help. Nokia PC Suite and all
related software can be downloaded from the U.S. Mobile Phone products
section of www.nokiausa.com/pcsuite.
Important: Only install and use applications and other software from
sources that offer adequate security and protection against harmful
software.
Bluetooth connectivity
Bluetooth wireless technology enables cost-free wireless connections between
electronic devices and can be used to send and receive images, text, gallery files,
voice recordings, video clips, notes, business cards, and calendar notes. It can also
be used to connect wirelessly to other products that use Bluetooth wireless
technology, such as computers. You can synchronize your phone and your PC
using Bluetooth connectivity.
Since devices with Bluetooth connectivity communicate using radio waves, your
phone and the other device do not need to be in direct line-of-sight.
The two devices only need to be within 10 meters (30 feet) of each other. The
connection can be subject to interference from obstructions such as walls or
other electronic devices.
Features using Bluetooth technology, or allowing such features to run in the
background wihle using other features, increase the demand on battery power
and reduce the battery life.
Whether used actively or in the background, the Bluetooth wireless technology
application consumes the battery and reduces the operating time of the phone.
74
FCC DRAFT
Settings
This device is compliant with Bluetooth Specification 1.2 and supports the
following profiles:
• Object push profile (OPP)
• File transfer profile (FTP)
• Dial-up networking profile (DUN)
• Generic object exchange profile (GOEP)
• Headset profile (HSP)
• Handsfree profile (HFP)
• Generic access profile (GAP)
• Serial port profile (SPP)
To ensure interoperability between other devices supporting Bluetooth
technology, use Nokia approved enhancements for this model. Check with the
manufacturers of other devices to determine their compatibility with this device.
There may be restrictions on using Bluetooth technology in some locations.
Check with your local authorities or service provider. If you want more
information on this function, visit the Bluetooth Technology organization
website: https://www.bluetooth.org/.
Pairing
You can set up a permanent association (pairing) between your phone and
another device with Bluetooth technology. Some devices may require pairing
before data transfer can take place.
To pair with a device, you and the owner of the other device must agree on a
passcode of 1–16 numeric characters. The first time you try to connect the
devices, you must each enter the same passcode. After the devices are paired, you
do not need to use the passcode again, so there is no need to remember it.
Paired devices are placed in your paired device list. You can view the list even
when Bluetooth connectivity is not active or when the devices in the list are not
available for connection.
Select Menu > Settings > Connectivity > Bluetooth > Paired devices > Options
and one of the following:
Assign short name—Give a nickname to the selected device (visible to you only).
Allow this device to connect automatically?—Select No if you want the phone
to connect to the selected device automatically or Yes if you want the phone to
ask for your permission first.
FCC DRAFT
75
Settings
Delete pairing—Delete the pairing to the selected device.
Pair new device—Search for active devices with Bluetooth technology within
range, scroll to the desired device, and select Pair to establish pairing with that
device. Do not accept Bluetooth connectivity from sources you do not trust.
Bluetooth connectivity settings
You can define how your phone is shown to other devices with Bluetooth
connectivity.
Select Menu > Settings > Connectivity > Bluetooth and one of the following:
My phone's visibility—Select Perm. visibil. or Temp. visibil. to show the phone to
all other devices with Bluetooth connectivity, or select Hidden to show the phone
only to the paired devices. Operating the phone in Hidden mode is a safer way to
avoid malicious software.
My phone's name—Change your phone name that is seen by other users.
Set up a connection
1. Select Menu > Settings > Connectivity > Bluetooth > Bluetooth > On. The
active Bluetooth technology connection is indicated by
at the top of the
display.
2. Select Search for audio enhancements to search for compatible devices with
Bluetooth connectivity. The list of found devices appears on the display.
3. Select the desired device. If required, enter the Bluetooth connectivity
passcode to pair with your device.
4. If required, enter the Bluetooth connectivity passcode of the device to pair
with the device.
Your phone connects to the device. You can start data transfer.
To view the device you are connected to, select Menu > Settings >
Connectivity > Bluetooth > Active devices.
To view all inactive and active devices to which your phone is connected, select
Menu > Settings > Connectivity > Bluetooth > Paired devices.
To deactivate Bluetooth connectivity, select Menu > Settings > Connectivity >
Bluetooth > Bluetooth > Off. Deactivation of the Bluetooth technology
connection does not affect other functions of the phone.
76
FCC DRAFT
Settings
Send data
Instead of using the Connectivity menu, you can use other phone menus to send
various types of data to other devices with Bluetooth connectivity. For example,
you can send a video clip from the Video clips folder of the Gallery menu. See the
appropriate sections of the user guide for information about sending different
types of data.
Receive a data transfer
When a Bluetooth technology connection is active in your phone, you can receive
notes, business cards, video clips, and other types of data transfers from another
device with Bluetooth connectivity. When you receive a data transfer, an alarm
sounds, and a message appears in the standby mode.
To view the transferred item immediately from the standby mode, select Show. To
view the item at a later time, select Exit.
Depending on the nature of the item, it is saved in the appropriate menu in your
phone. For example, a business card is saved in Contacts, and a calendar note is
saved in Calendar.
USB data cable transfer
You can transfer data between your phone and a compatible PC or PictBridge
printer using a DKU-2 USB data cable. Check the documentation that came with
your printer to see if it supports PictBridge. Disconnect the USB data cable from
the phone to make a call.
Enable default mode connection
Connect to your PC in Nokia mode to transfer phone data and files between your
phone and PC using Nokia PC Suite.
1. Connect your PC and your phone with a DKU-2 USB data cable. A notification
appears on the display that asks which mode you want to select.
2. Select Accept > Nokia mode. A notification appears on the display stating a
connection is active.
You can now use PC Suite to connect to your phone.
Enable printing connection
Connect to your PictBridge printer using the Printing mode to print photos stored
on your phone.
FCC DRAFT
77
Settings
1. Connect your PictBridge compatible printer and your phone with a DKU-2
USB data cable. A notification appears on the display that asks which mode
you want to select.
2. Select Accept > Printing. A notification appears on the display stating a
connection is active.
You can now print photos stored on your phone.
Enable data storage connection
Connect to your PC in the Data storage mode to transfer music, photo, and video
files to the phone, and from the phone to your PC with Windows Explorer.
1. Connect your PC and your phone with a DKU-2 USB data cable. A notification
appears on the display that asks which mode you want to select.
2. Select Accept > Data storage. The notification Data storage mode is displayed
while the phone is in the data transfer mode.
3. Open Windows Explorer. Your phone appears as a local drive (named Nokia
6175i by default), and with a drive letter assigned to it.
4. Click on the folders to display a window that shows the contents of the folder
on the phone.
5. Open a second instance of Windows Explorer and display the contents of the
folder on your PC where you have audio, photo files, or video files stored.
6. Select the files on your PC that you wish to transfer to the phone.
7. Drag and drop the files from the second window into the first window and
place in a folder.
8. The files are transferred to the phone and can be played by the Music player
or accessed by the Media player.
If you selected a file or files that require more memory than can fit on the
available phone memory, you receive an error note. Deselect some of your
selected files until the required memory is less than or equal to the available
memory on your phone.
Disable data storage connection
1. To disable the USB data cable, double-click the green arrow on the taskbar at
the bottom of your PC screen.
An Unplug or Eject Hardware message is displayed.
78
FCC DRAFT
Settings
2. Click USB Device in the Hardware devices window.
The Stop a Hardware device message is displayed.
3. Highlight USB device, and click OK.
The pop-up window Safe to Remove Hardware is displayed with the message
"The ‘USB Device’ device can now be safely removed from the system.
4. Click OK.
Data and fax transfer
You can make data and fax transfers during a phone call. See "Data and fax calls,"
p. 70.
■ Enhancements
Select Menu > Settings > Enhance-ments. You can select an enhancement menu
if the phone is or has been connected to a compatible enhancement type.
Depending on enhancement, select from the following options:
Default profile—Choose the profile you wish to be automatically activated when
a headset, car kit, or loopset is connected.
Automatic answer—Answer calls automatically after one ring when a headset,
car kit, loopset, or charger is connected. Select On or Off.
Lights (for Handsfree or Charger only)—Choose to keep the phone lights always
on, or to shut off automatically after several seconds. Select On or Automatic.
If the Loopset is connected and recognized through the Pop-Port™ connector, the
phone automatically uses the Loopset.
TTY/TDD (network service)—Connect to a TTY/TDD device. Check with the
manufacturer of the TTY/TDD device for a connecting cable that is compatible
with your phone. Check with your service provider for availability and description
of services.
■ Security
To access Security for the first time, you must enter the preset lock code.
Depending on your wireless service provider, the preset lock code may be a four
digit number such as 1234, 0000, or the last four digits of your phone number.
If you enter the wrong lock code five times in succession, your phone will not
accept your current lock code for 5 minutes.This occurs even if when you power
FCC DRAFT
79
Settings
down the phone between incorrect attempts. You may also be asked to enter the
security code (defaulted to 12345).
Depending on your wireless service provider, your phone may ask for the security
code instead of the lock code. See "Security settings," p. 12. If none of these
options work, contact your wireless service provider for help.
Select Menu > Settings > Security, and enter the lock code (or security code)
and select OK to access the following options.
Phone lock
The phone lock feature protects your phone from unauthorized outgoing calls or
unauthorized access to information stored in the phone. When the phone lock is
activated, Phone locked is displayed each time you turn your phone on.
When the device is locked, you can still call the official emergency number
programmed into your phone.
Select Phone lock and one of the following:
Off—Immediately turns off the phone lock feature.
Lock now—Immediately turns on the phone lock feature.
On power-up—Turns on the phone lock feature the next time you turn the phone
on.
If you select Lock now, you must enter your lock code before the phone can
function normally.
Call not allowed appears if you attempt to place a call while your phone is locked.
To answer a call with the phone lock on, select Answer, or press the call key.
Allowed numbers
With the phone lock on, the only outgoing calls you can make are to the
emergency number programmed into your phone and the numbers stored in the
Allowed no. when phone locked location.
1. Select Allowed no. when phone locked > Assign.
2. Enter the phone number, or select Search to retrieve the number from the
contacts list, and select OK.
To place a call to an allowed number when the phone is locked, enter the allowed
number, and press the call key.
80
FCC DRAFT
Settings
Change lock code
When changing the lock code, avoid using codes similar to emergency numbers
to prevent accidental dialing of an emergency number. Make sure to remember
your lock code. If necessary, write it down and store it in a safe place away from
your phone.
1. Select Change lock code.
2. Enter the new lock code (only 4 characters), and select OK.
3. Enter the new lock code again for verification, and select OK.
Call restrictions
Call restrictions allows you to block or allow numbers for incoming or outgoing
calls.
1. Select Call restrictions and the type of calls you wish to restrict:
Restrict outgoing calls—Set restrictions on making calls.
Restrict incoming calls—Set restrictions on receiving calls.
2. Select whether to block or allow numbers:
Blocked numbers—Set numbers that are blocked on incoming calls, allowing
all other numbers. When a number is blocked, the call is sent to voice mail.
Allowed numbers—Set numbers that are allowed, blocking all other numbers.
3. To modify the restriction list, select from the following options:
Select—Add numbers to the restriction list.
Add restriction—Add a restriction to a number (unavailable if memory is full).
Edit—Edit a restriction on a number.
Delete—Delete a number from restriction list.
When calls are restricted, calls may be possible to the official emergency number
programmed into your device.
Voice privacy
Voice privacy is a network service, and its function depends on a variety of
services. Contact your service provider for more information.
FCC DRAFT
81
Settings
If your wireless service provider supports this feature, the voice privacy feature
protects the privacy of your current phone conversation from other callers
placing phone calls on your same network. Select Voice privacy > On or Off.
■ Network
The menu options you see in your phone are based on your service provider’s
network. Check with your service provider for more information.
The Network menu customizes the way your phone chooses a network in which
to operate while you are within or outside of your primary or home system. Your
phone is set to search for the most cost-effective network. If your phone cannot
find a preferred network, it selects a network automatically based on the option
you choose in the Network menu.
Roaming options
If supported by your wireless service provider, you can select which roaming
option you wish to use. Select Menu > Settings > Network > Roaming options
and one of the following.
Home only—You can make and receive calls in your home area only.
Automatic A—The phone automatically roams to another digital network. The
roaming rate applies when not in the home service area.
Automatic B—The phone automatically searches for service in another digital
network. If one is not found, the phone uses analog service. The roaming rate
applies when not in the home service area.
Mode
If supported by your wireless service provider, you can choose whether your
phone uses digital or analog service. Select Menu > Settings > Network > Mode
and one of the following.
Digital preferred—You prefer to make calls on a digital network, but will find
another network, if necessary.
Digital only—You can make and receive calls on a digital network only.
Analog per call—You can select an analog network on a call-to-call basis.
IS-95 per call—You can select an IS-95 network on a call-to-call basis.
82
FCC DRAFT
Settings
■ Network services
The following features are network services. See also "Network services," p. 83.
Select Menu > Settings > Network services to access the following options.
Store a feature code
Network feature setting allows you to activate network services in your phone
using feature codes received from your service provider. When you enter a
network feature code successfully, the feature becomes visible in the Network
services menu.
1. Select Network feature setting.
2. Enter the feature code from your service provider (for example, *900 for
activating Forward if busy), and select OK.
3. Select Call forwarding.
4. Scroll to the type of forwarding that matches the feature code you entered,
and select Activate.
The activated feature code is now stored in your phone, and you are returned to
the Feature code: prompt. Continue entering other feature codes (for example,
*900 to cancel Forward if busy), or press the end key to return to the standby
mode.
Call forwarding
Call forwarding tells your network to redirect incoming calls to another number.
Call forwarding is a network service and may not work the same in all networks,
so contact your wireless provider for availability and information.
To activate, do the following:
1. Select Call forwarding and one of the following:
Forward all calls—Forward all calls to the number you specify.
Forward if busy—Forward incoming calls when you are in a call.
Forward if not answered—Forward incoming calls to another number if you
are unable to answer. You can set a delay before forwarding takes place.
Forward if out of reach—Forward incoming calls when your phone is off.
2. Select Activate.
3. Enter the number to which your calls, data, or other information are
forwarded, and select OK.
FCC DRAFT
83
Settings
To cancel, select Call forwarding > Cancel all call forwarding.
Cancel all call forwarding may affect your ability to receive voice mail messages.
Contact your wireless provider for details.
Call waiting
If your wireless provider supports this feature, call waiting notifies you of an
incoming call even while you are in a call. You can accept, reject, or ignore the
incoming call.
To activate, select Call waiting > Activate.
During a call, select Answer or press the call key to answer the waiting call. The
first call is put on hold. Press the end key to end the active call.
To cancel, select Call waiting > Cancel.
Send my caller ID
If your wireless service provider supports this feature, you can prevent your
number from appearing on the receiving party’s caller ID. Select Send my caller
ID > Yes or No.
My number selection
To view your phone number, select My number selection. This is a network
service.
■ Restore factory settings
You can reset some of the menu settings to their original values. Data that you
have entered or downloaded is not deleted (for example, entries in your contacts
list are not affected).
1. Select Menu > Settings > Restore settings.
2. Enter the lock code, and select OK.
Depending on your wireless service provider, your device may request the security
code (defaulted to 12345) instead of the lock code.
■ Phone details
You can view the current details of your phone. Select Menu > Settings > Phone
details and one of the following options:
User details—Shows the phone’s current number details.
84
FCC DRAFT
Settings
Version details—Shows the phone model, hardware, software, and browser
version information for the phone.
System details—Shows the digital network the phone is on.
Icon details—Shows the icons used.
FCC DRAFT
85
Organizer
10. Organizer
Your phone contains features to help organize your everyday life, including an
alarm clock, calendar, calculator, countdown timer, and stopwatch.
■ Alarm clock
Select Select Menu > Organizer > Alarm clock to access the following options.
Set an alarm
The alarm clock is based on the phone clock. It sounds an alert any time you
specify and even works if the phone is turned off.
1. Select Alarm time.
2. Enter the time for the alarm in hh:mm format, and select OK.
3. Select am or pm if 12-hour clock format is on.
Alarm on appears briefly on the display, and
appears.
To reset the alarm, select Alarm time > On.
To turn off the alarm, select Alarm time > Off.
Repeat alarm
You can set the alarm to repeat every day or only on certain days of the week.
1. Select Repeat alarm > On.
2. Check the day or days of the week you wish to repeat the alarm, and select
Mark. Select Unmark to remove a day.
3. Select Done when you have added all desired days.
To revise the days for a repeated alarm, select Repeat alarm > Repetition days.
To stop a repeated alarm, select Repeat alarm > Off.
Set the alarm tone
You can set which tone is played when the alarm sounds.
Select Alarm tone and one of the following:
Standard—Select the default alarm.
86
FCC DRAFT
Organizer
Radio—Select the radio as the alarm.
Open Gallery—Select a tone from the Gallery as the alarm.
If the alarm time is reached while the phone is switched off, the phone switches
itself on and starts sounding the alarm tone. If you select Stop, the device asks
whether you want to activate the phone for calls. Select No to switch off the
device or Yes to make and receive calls. Do not select Yes when wireless phone
use may cause interference or danger.
Set the snooze time-out
You can set the Snooze time-out for the alarm. Select Snooze time-out and a
snooze time.
When the alarm sounds, your phone beeps, vibrates (if the vibrate alert is on in
the active profile), and lights up.
With the phone on, select Stop to shut the alarm off or Snooze. If you select
Snooze, the alarm stops for the amount of time you specified.
If you do not press a key, the alarm stops (snoozes) for the Snooze time-out, then
sounds again.
■ Calendar
Select Menu > Organizer > Calendar.
The current day is indicated by a frame. If there are any notes set for the day, the
day is in bold type. To view the day notes, select View. To view a week, select
Options > Week view. To delete all notes in the calendar, select the month or
week view, and select Options > Delete all notes.
Other options of the day view may be Make a note, Delete, Edit, Move, Go to date
or Go to today; Copy a note to another day; and Send note as text message or
multimedia message with IR or Bluetooth technology to the calendar of another
compatible phone.
To set the date and time settings, select Settings. To set the phone to delete old
notes automatically after a specified time, select Settings > Auto-delete notes.
Make a calendar note
Select Menu > Organizer > Calendar. Scroll to the date you want, and select
Options > Make a note > Meeting, Call, Birthday, Memo, or Reminder.
FCC DRAFT
87
Organizer
A note alarm
The phone beeps and displays the note. With a call note on the display, to call the
displayed number, press the call key. To stop the alarm and view the note, select
View. To stop the alarm for approximately 10 minutes, select Snooze. To stop the
alarm without viewing the note, select Exit.
■ Notes
You can write text notes with Notes. You can also send notes in a text message or
using Bluetooth connectivity.
Select Menu > Organizer > Notes to select from the following options. You see
your current list of notes.
If there are no notes, select Add note to create your first note. If there are existing
notes, scroll to a note, and select View.
Make a note
To create the first note, select Add note. Create your note, and select Save.
To create additional notes, select Options > Make a note. Create your note, and
select Save.
Create note options
When you create a note, select Options and one of the following options:
Insert time & date—Add the time and date to your note.
Close—Return to the notes list.
Insert smiley—Insert a smiley into your message.
Insert word or Edit word—Enter or edit the text of a new word that might not
appear in the predictive text dictionary. This option only appears when predictive
text is on.
Insert symbol—Insert a special character into your message. This option only
appears when predictive text is on.
Writing language—Choose the language you want to use.
Prediction on or Prediction off—Turn predictive text on or off.
Matches—View matches found in the predictive text dictionary for the word you
want to use. This option only appears when predictive text is on.
88
FCC DRAFT
Organizer
Send a note
Scroll to the note you wish to send, and select Options > Send note and an option
to send the note in a text message, in a multimedia message, or directly to
another device.
Notes options
These note options appear only when you have created one or more notes. Select
Options and one of the following:
Make a note—Create a new note.
Delete—Delete the note you selected.
Edit—Edit the note you selected.
Use detail—Use a detail contained in the note.
Send note—Send a note in a text message, in a multimedia message, or directly to
another device.
Delete all notes—Delete all notes.
■ To-do list
Use the To-do list feature to keep track of your tasks. You can save a task or
errand as a to-do list note, select a priority level for the to-do list note, and mark
it as done when you have completed it. You can sort the to-do list notes by
priority or by date.
Select Menu > Organizer > To-do list to access the following options.
Make a to-do list note
To make the first to-do list note, select Add note. Enter the subject, and select
Next. Select Change > High, Medium, or Low to change the priority. Continue
changing the remaining fields on the screen, and select Save.
To make additional to-do list notes, select Options > Add. Enter the subject, and
select Next. Select Change > High, Medium, or Low to change the priority.
Continue changing the remaining fields on the screen, and select Save.
To-do list note options
When you create a to-do list note, select Options to access the following options:
Insert smiley—Insert a smiley into your message.
FCC DRAFT
89
Organizer
Insert word or Edit word—Enter or edit the text of a new word that might not
appear in the predictive text dictionary. This option only appears when predictive
text is on.
Insert symbol—Insert a special character into your message. This option only
appears when predictive text is on.
Writing language—Choose the language you want to use.
Prediction on or Prediction off—Turn predictive text on or off.
Matches—View matches found in the predictive text dictionary for the word you
want to use. This option only appears when predictive text is on.
Edit to-do list notes
Select View > Edit. Edit the subject and any additional fields, and select Save.
View or send to-do list notes
Select View > Options and select from the following options:
Mark note as done or Mark as not done—Indicate whether the to-do list note is
completed.
Delete—Delete the to-do list note.
Use detail—Use a detail contained in the note.
Edit priority—Change the priority to High, Medium, or Low.
Send > Send as message, Via calendar or Via Bluetooth—Send the to-do list note
in calendar format (vCal), in a text message, in a multimedia message, or directly
to another device.
Go to calendar—Leave the to-do list, and go to the calendar.
Save to calendar—Save the to-do list note to your calendar.
To-do list options
These to-do list options appear only when you have created one or more notes.
Select Options and one of the following:
Add—Create a new to-do list note.
Delete—Delete the to-do list note you selected.
Mark note as done or Mark as not done—Indicate whether the to-do list note is
completed.
90
FCC DRAFT
Organizer
Use detail—Use a detail contained in the note.
Sort by deadline or Sort by priority—Sort the to-do list by date or priority.
Send—Send the to-do list note in calendar format (vCal), in a text message, in a
multimedia message, or directly to another device.
Go to calendar—Leave the to-do list, and go to the calendar.
Save to calendar—Save the to-do list note you selected to your calendar.
Delete done notes—Delete the completed to-do list note you selected.
Delete all notes—Delete all to-do list notes.
■ Calculator
The calculator in your phone adds, subtracts, multiplies, divides, calculates the
square and the square root, changes the sign of the number entered, and
converts currency values. Select Menu > Organizer > Calculator.
Note: This calculator has a limited accuracy and is designed for simple
calculations.
Use calculator
1. Enter the first number in the calculation.
Press # for a decimal point if necessary.
Scroll up or down to change the sign of your number or value.
Press * to cycle through the add (+), subtract (-), multiply (*), and divide (/)
characters. Pause briefly to select the displayed character.
2. Enter the second number in your calculation.
3. Select Equals.
To perform a square or square root calculation, select Options > Square or Square
root.
Currency converter
You can convert foreign currency to domestic, or vice versa, directly from the
standby mode or from the Calculator menu.
Note: When you change base currency, you must enter the new rates
because all previously set exchange rates are cleared.
1. Select Options > Exchange rate and one of the following options:
FCC DRAFT
91
Organizer
Foreign units in home units—The number of home units it takes to make one
unit of foreign currency.
Home units in foreign units—The number of foreign units it takes to make one
unit of your home currency.
2. Enter the exchange rate (press # to insert a decimal), and select OK.
3. Select Back to return to the Calculator screen, and enter the currency amount
to convert.
4. Select Options > To home or To foreign.
To home—Converts foreign currency to domestic currency.
To foreign—Converts domestic currency to foreign currency.
5. If you have not already entered an exchange rate, the device prompts you to
enter it. Select OK. You can edit the exchange rate at any time.
■ Timer
The countdown timer in your device enables you to enter a specific time (up to 99
hours, 59 minutes, and 59 seconds). When the time runs out, your device sounds
an alarm.
The countdown timer only works when the phone is on. After you turn off your
phone, the timer is no longer active Select Menu > Organizer > Timer to select
from the following options.
Set the normal timer
1. Select Normal timer.
2. Enter the time (in hh:mm:ss format), and select OK.
3. Enter a note for the timer, and select Start.
and the timer (in hh:mm:ss format) appear when the countdown timer is
running.
When the time runs out, your phone sounds an alarm, vibrates, and flashes its
lights. If you are in the standby mode, select Restart or Exit. If you are not in the
standby mode, press any key during the alarm to stop the timer.
After 60 seconds the timer alert expires automatically. Select Exit or press the
end key to clear the timer note.
92
FCC DRAFT
Organizer
Change a normal timer
After you have set a timer, you can change the time.
1. Select Change time.
2. Enter the new time, and select OK.
3. Leave the note as it is, or enter a new note, and select Start.
Create a new interval timer
1. Do one of the following:
If you there are no existing interval timers, select Interval timer > Add new
timer.
If there is an existing interval timer, select Interval timer. Select an existing
timer, and Add new timer.
2. Enter a name for the timer, and select Save.
3. Enter a name for the first period of the interval timer, and select Save.
4. Enter a time limit for the first period, and select OK.
5. The first period is displayed on the screen. Select the period, and Add period,
and repeat steps 3 and 4 to add any additional interval periods. The maximum
number of interval periods you can create is 10.
Set an existing interval timer
This option only appears if you have not previously created an interval timer.
1. Select Interval timer and an existing timer.
2. Select one of the following options:
Start timer—Start the interval timer.
View timer—View all periods in the interval timer. Select a period and Options
to add a period, edit the existing period, delete the period, or start the timer.
Edit timer—Edit the timer name or the name and time for the interval periods.
Add new timer—Add a new interval timer. See "Create a new interval timer,"
p. 93.
Delete timer—Delete the selected timer.
FCC DRAFT
93
Organizer
Set interval period transitions
You can set the interval timer to automatically start the next interval period
when the current interval period is completed.
Select Settings > Continue to the next period > Confirm first to manually start the
next interval period, or Automatic to automatically start the next interval period.
Stop the timer before the alarm sounds
After you have set the timer, you can stop the timer. Select Menu > Organizer >
Timer > Stop timer.
■ Stopwatch
Your phone has a stopwatch that can be used to track time. The stopwatch
displays time in hours, minutes, seconds, and fractions of a second in hh:mm:ss.ss
format.
Using the stopwatch or allowing it to run in the background when using other
features increases the demand on battery power and reduces the battery life.
Measure split or lap time
Use the split time or lap time functions for activities where you need to pace
yourself.
1. Select Menu > Organizer > Stopwatch > Split timing or Lap timing > Start.
Split timing—Use the split time function when you need to pace yourself (for
example, a long-distance race). Select Split to note the lapsed time. The timer
continues to run and the split time appears below the running time. Each
time you select Split, the new measured time appears at the beginning of the
list. The maximum number of splits is 20.
Lap timing—Use the lap time function when you want to track how long it
takes to complete each cycle or lap. Select Lap to note the lap time. The clock
stops, then immediately restarts from zero. The lap time appears below the
running time. Each time you select Lap, the new measured time appears at
the beginning of the list. The maximum number of laps is 20.
2. Select Stop to end timing and display total time.
94
FCC DRAFT
Organizer
Save a time
To save a time while the clock is running, select Stop > Save, enter a name for the
measurement, and select OK. If you do not enter a name, the total time is used as
the default title for the lap or split time.
Stopwatch options
Select Menu > Organizer > Stopwatch and one of the following:
Continue—Continues to measure time. This option only appears if the clock is
running and you are returning to the stopwatch screen.
Show last time—View the last measured time.
Split timing—Use the split time function.
Lap timing—Use the lap time function.
View times—Browse saved times.
Delete times > One by one or Delete all—Delete saved times.
Operation note
If you press the end key and return to the standby mode, the clock continues to
run in the background, and
appears at the top of the screen.
To return to the Stopwatch screen, do the following:
1. Select Menu > Organizer > Stopwatch > Continue.
2. To stop the clock, select Stop.
FCC DRAFT
95
Mobile web
11. Mobile web
Mobile web is a network service. See "Network services," p. 83.
Your phone has a built-in browser you can use to connect to selected services on
the mobile Internet. If your wireless service provider supports this feature, you
can view weather reports, check news or flight times, view financial information,
and much more. The Web browser on your phone can display WAP-based
content.
Your device may have some bookmarks loaded for sites not affiliated with Nokia.
Nokia does not warrant or endorse these sites. If you choose to access them, you
should take the same precautions, for security or content, as you would with any
Internet site.
If the security indicator (
) is displayed during a connection, the data
transmission between the device and the Internet gateway or server is encrypted.
The service provider secures the data transmission between the gateway and the
content server.
Important: Use only services that you trust and that offer adequate
security and protection against harmful software.
■ Mobile Internet access
Because mobile Internet content is designed to be viewed from your phone, your
wireless provider is now your mobile Internet service provider as well.
Your wireless provider has created a home page and set up your browser to go to
this page when you log on to the mobile Internet. Your service provider’s home
page may contain links to a number of other sites.
It should not be necessary to manually configure the browser on your phone.
Normally this is done by your wireless provider when you subscribe to the
feature. Contact your wireless provider if you have problems using the browser.
■ Sign on to the mobile Internet
Select Menu > Mobile web.
After a brief pause, your phone attempts to connect to your wireless provider’s
home page. If you receive an error message, your phone may not be set up for
browsing. Contact your wireless provider to ensure that your phone is configured
properly.
96
FCC DRAFT
Mobile web
■ Navigate the mobile Internet
Since your phone screen is much smaller than a computer screen, mobile Internet
content is displayed differently than you may be accustomed to seeing. This
section contains guidelines for using phone keys to navigate a WAP site.
Phone keys
• To browse the WAP site, scroll up or down.
• Select a highlighted item.
• To enter text, press # to switch text input modes, and press 0-9.
• To enter special characters, press *.
Receive a call while online
Depending on your wireless service provider, you may still be able to receive a
voice call while using the WAP browser.
• To answer the incoming call, press the call key.
• To reject the incoming call, press the end key.
After you end your voice call, the mobile Internet connection automatically
resumes.
If your wireless service provider does not support incoming calls while browsing,
incoming calls are automatically forwarded to voice mail.
Make an emergency call while online
You can end your data connection and make an emergency call.
1. To close your mobile Internet connection, press the end key.
2. Press the end key as many times as needed to clear the display and ready the
phone for calls.
3. Enter the emergency number for your present location. Emergency numbers
may vary by location.
4. Press the call key.
FCC DRAFT
97
Mobile web
Clear the cache and disconnect
A cache is a memory location that is used to store data temporarily. If you have
tried to access or have accessed confidential information requiring passwords,
empty the cache after each use. The information or services you have accessed
are stored in the cache. To empty the cache while in the browser menu, select
Navigate > Advanced > Clear. Scroll to Cache , and select > Clear. The cache also
clears when you press and hold the end key to power off your device.
To close your mobile Internet connection while browsing, press the end key.
98
FCC DRAFT
Extras
12. Extras
■ Collection
Select Menu > Extras > Collection, and an application. Scroll to an application
and select Open, or press the call key.
An application may require a few seconds to load. When you open an application,
wait for the launch screen to disappear. At that point, the application is ready.
Leaving applications running in the background increases the demand on battery
power and reduces the battery life.
Important: Only install applications from sources that offer adequate
protection against harmful software.
In an application, select Options to view available options. The options available
vary per application.
FCC DRAFT
99
Push to talk
13. Push to talk
Push to talk (PTT) is a two-way radio service available on your network service.
PTT provides direct voice communication. All users of PTT must first subscribe to
the service. Contact your service provider to subscribe.
You can use PTT to talk with one person or among a group of people. These
individuals or groups must first be set up in your PTT contacts list. When your call
is connected, the person or group you are calling receives a beeping sound. There
is no ringing. You can set your phone to listen either with the earpiece or the
loudspeaker.
You can use other functions of the phone while using PTT. However, certain
features are not available for PTT, such as voice mail.
Warning: Do not hold the device near your ear when the loudspeaker is
in use, because the volume may be extremely loud.
■ Connect to PTT
Press the PTT key on the phone. See "Side view," p. 10. The phone connects to the
PTT service. If the connection is successful, the
icon appears; and you see the
PTT contacts list.
If the connection is not successful, the
icon appears. If you cannot connect to
the PTT service, contact your service provider.
■ Set up PTT
Set up PTT contacts
To call a person using PTT, you must first add the person to your PTT contact list.
1. Connect to your PTT service.
2. Select Add new , and enter the mobile number of a PTT subscriber.
3. Select OK, and enter the name of the contact.
4. Select OK. The contact is added to the contact list.
5. Similarly, add additional contacts.
100
FCC DRAFT
Push to talk
Set up PTT groups
You can add individual subscribers to groups. When you call a group, all members
who are connected hear your calling tone. Each member can answer the call and
take turns transmitting to the group.
From the PTT contacts screen, select Options > New PTT group, enter the name of
the group, and select OK.
PTT settings
You can enable, disable, and customize your PTT settings. Select Menu > Settings
> Push to talk settings and one of the following options:
Push to talk service > Enable or Disable—Enable or disable the PTT service.
Default audio > Loudspeaker or Handset—Turn the loudspeaker on or off.
Confirm push to talk calls > Yes or No—Answer PTT calls manually or
automatically.
■ Make a PTT call
To make a call to an individual or a group:
1. From the standby mode, press the PTT key to open the PTT contacts list.
Your PTT contacts list shows the availability of each contact.
or
—The contact, or at least one member of the group, is available.
or
—The contact or group is not available.
or
—The contact or group is busy; try again later.
or
—The contact or group has requested a status of do not disturb;
try later.
or
—The contact or group is unknown to the service. Check that the
contact or members of the group are subscribed to the service.
2. Select the person or group to call, and press the PTT key again.
3. When the screen displays Conversation open, press the PTT key, and wait for a
double tone. Speak into the phone, and release the PTT key to listen.
4. When the call is complete, select End call. Your phone returns to the standby
mode.
FCC DRAFT
101
PC connectivity
14. PC connectivity
■ PC data transfer
You can transfer data, such as music, photos, and videos, from your device to a
compatible PC or from a compatible PC to your device using a Bluetooth or USB
connection. See "Connectivity," p. 74.
There may be restrictions on using Bluetooth technology in some locations.
Check with your local authorities or service provider.
■ Nokia PC Suite
Nokia PC Suite software is available for this phone. Nokia PC Suite is a collection
of powerful tools that you can use to manage your phone features and data. Each
component is a separate program that includes online help. Remember to make
back-up copies of all important data.
Nokia PC Suite software, installation instructions, and other documentation is
provided free of charge and can be downloaded from the software downloads
section of the Nokia web site: www.nokiausa.com/pcsuite.
Only install and use applications and other software from sources that offer
adequate protection against harmful software.
To disconnect the cable from the device, hold the connector, and remove the
cable.
Some of the features in your phone require network support. Contact your service
provider for availability and configuration instructions.
102
FCC DRAFT
Enhancements
15. Enhancements
Check the model number of any charger before use with
this device. This device is intended for use when supplied
with power from the AC-3 or AC-4 charger.
Warning: Use only batteries, chargers and enhancements approved by
Nokia for use with this particular model. The use of any other types may
invalidate any approval or warranty, and may be dangerous.
For availability of approved enhancements, please check with your dealer.
A few practical rules about accessories and enhancements:
• Keep all accessories and enhancements out of the reach of small children.
• When you disconnect the power cord of any accessory or enhancement, grasp
and pull the plug, not the cord.
• Check regularly that enhancements installed in a vehicle are mounted and
are operating properly.
• Installation of any complex car enhancements must be made by qualified
personnel only.
Power
• Standard 970mAh Li-Ion Battery (BL-5C)
• Compact Charger (AC-3)
• Travel Charger (AC-4)
• Mobile Charger (DC-4)
• Charger Adapter (CA-44)
Use the CA-44 charger adapter to connect the phone with Nokia chargers
with a larger barrel size, including ACP-7, ACP-8, ACP-9, ACP-12, AC-1
(retractable charger), and LCH-12 (mobile charger).
USB data cable
• USB Connectivity Cable (DKU-2)
• USB Cable with miniUSB Jack (DKE-2)
Handsfree
• CDMA Headrest Handsfree 2.5 mm (BHF-4)
FCC DRAFT
103
Enhancements
• Wireless Plug-in Handsfree (HF-6W)
• Wireless Plug-in Car Handsfree (HF-9W)
Headsets
• CDMA 2.5 mm Stereo Headset (HS-9)
• Wireless Headsets (HS-11W, HS-13W, HS-21, HS-24W, HS-25W, HS-26W,
HS-36W, HS-37W)
Miscellaneous
• Inductive Loopset (LPS-4)
• TTY Adapter (HDA-10)
• Advanced Car Kit (CK-1W)
• Universal Car Installation Kit (CK-7W)
• Mobile Holder (CR-39)
• Audio Adapter (AD-15)
• Music Stand (MD-1)
104
FCC DRAFT
Battery information
16. Battery information
■ Charging and discharging
Your device is powered by a rechargeable battery. The full performance of a new
battery is achieved only after two or three complete charge and discharge cycles.
The battery can be charged and discharged hundreds of times, but it eventually
wears out. When the talk and standby times are noticeably shorter than normal,
replace the battery. Use only Nokia approved batteries, and recharge your battery
only with Nokia approved chargers designated for this device.
If a replacement battery is being used for the first time or if the battery has not
been used for a prolonged period, it may be necessary to connect the charger
then disconnect and reconnect it to start the charging.
Unplug the charger from the electrical plug and the device when not in use. Do
not leave fully charged battery connected to a charger, since overcharging may
shorten its lifetime. If left unused, a fully charged battery loses its charge over
time.
If the battery is completely discharged, it may take a few minutes before the
charging indicator appears on the display or before any calls can be made.
Use the battery only for its intended purpose. Never use any charger or battery
that is damaged.
Do not short-circuit the battery. Accidental short-circuiting can occur when a
metallic object such as a coin, clip, or pen causes direct connection of the
positive (+) and negative (-) terminals of the battery. (These look like metal strips
on the battery.) This might happen, for example, when you carry a spare battery
in your pocket or purse. Short-circuiting the terminals may damage the battery
or the connecting object.
Leaving the battery in hot or cold places, such as in a closed car in summer or
winter conditions, reduces the capacity and lifetime of the battery. Always try to
keep the battery between 15°C and 25°C (59°F and 77°F). A device with a hot or
cold battery may not work temporarily, even when the battery is fully charged.
Battery performance is particularly limited in temperatures well below freezing.
Do not dispose of batteries in a fire as they may explode. Batteries may also
explode if damaged. Dispose of batteries according to local regulations. Please
recycle when possible. Do not dispose as household waste.
FCC DRAFT
105
Battery information
■ Nokia battery authentication guidelines
Always use original Nokia batteries for your safety. To check that you are getting
an original Nokia battery, purchase it from an authorized Nokia dealer, look for
the Nokia Original Enhancements logo on the packaging, and inspect the
hologram label using the following steps:
Successful completion of the three steps is not a total assurance of the
authenticity of the battery. If you have any reason to believe that your battery is
not an authentic original Nokia battery, you should refrain from using it and take
it to the nearest authorized Nokia service point or dealer for assistance. Your
authorized Nokia service point or dealer will inspect the battery for authenticity.
If authenticity cannot be verified, return the battery to the place of purchase.
Authenticate hologram
When looking at the hologram on the label, you should see
the Nokia connecting hands symbol from one angle and
the Nokia Original Enhancements logo when looking from
another angle.
When you angle the hologram left, right, down, and up,
you should see 1, 2, 3, and 4 dots on each side respectively.
Scratch the side of the label to reveal a 20-digit code, for
example, 12345678919876543210. Turn the battery so
that the numbers are facing upwards. The 20-digit code
reads starting from the number at the top row followed by
the bottom row. Confirm that the 20-digit code is valid by
following the instructions at www.nokia.com/
batterycheck.
What if your battery is not authentic?
If you cannot confirm that your Nokia battery with the hologram on the label is
an authentic Nokia battery, please do not use the battery. Take it to the nearest
authorized Nokia service point or dealer for assistance. The use of a battery that
106
FCC DRAFT
Battery information
is not approved by the manufacturer may be dangerous and may result in poor
performance and damage to your device and its enhancements. It may also
invalidate any approval or warranty applying to the device.
To find out more about original Nokia batteries, visit www.nokia.com/battery.
FCC DRAFT
107
Care and maintenance
Care and maintenance
Your device is a product of superior design and craftsmanship and should be
treated with care. The suggestions below will help you protect your warranty
coverage.
• Keep the device dry. Precipitation, humidity, and all types of liquids or
moisture can contain minerals that will corrode electronic circuits. If your
device does get wet, remove the battery, and allow the device to dry
completely before replacing it.
• Do not use or store the device in dusty, dirty areas. Its moving parts and
electronic components can be damaged.
• Do not store the device in hot areas. High temperatures can shorten the life of
electronic devices, damage batteries, and warp or melt certain plastics.
• Do not store the device in cold areas. When the device returns to its normal
temperature, moisture can form inside the device and damage electronic
circuit boards.
• Do not attempt to open the device other than as instructed in this guide.
• Do not drop, knock, or shake the device. Rough handling can break internal
circuit boards and fine mechanics.
• Do not use harsh chemicals, cleaning solvents, or strong detergents to clean
the device.
• Do not paint the device. Paint can clog the moving parts and prevent proper
operation.
• Use a soft, clean, dry cloth to clean any lenses, such as camera, proximity
sensor, and light sensor lenses.
• Use only the supplied or an approved replacement antenna. Unauthorized
antennas, modifications, or attachments could damage the device and may
violate regulations governing radio devices.
• Use chargers indoors.
• Always create a backup of data you want to keep, such as contacts and
calendar notes, before sending your device to a service facility.
All of the above suggestions apply equally to your device, battery, charger, or any
enhancement. If any device is not working properly, take it to the nearest
authorized service facility for service.
108
FCC DRAFT
Additional safety information
Additional safety information
Your device and its enhancements may contain small parts. Keep them out of the
reach of small children.
■ Operating environment
Remember to follow any special regulations in force in any area and always
switch off your device when its use is prohibited or when it may cause
interference or danger. Use the device only in its normal operating positions. This
device meets RF exposure guidelines when used either in the normal use position
against the ear or when positioned at least 2.2 centimeters (7/8 inches) away
from the body. When a carry case, belt clip, or holder is used for body-worn
operation, it should not contain metal and should position the device the above
stated distance from your body. To transmit data files or messages, this device
requires a quality connection to the network. In some cases, transmission of data
files or messages may be delayed until such a connection is available. Ensure the
above separation distance instructions are followed until the transmission is
completed.
Parts of the device are magnetic. Metallic materials may be attracted to the
device, and persons with a hearing aid should not hold the device to the ear with
the hearing aid. Do not place credit cards or other magnetic storage media near
the device, because information stored on them may be erased.
■ Medical devices
Operation of any radio transmitting equipment, including wireless phones, may
interfere with the functionality of inadequately protected medical devices.
Consult a physician or the manufacturer of the medical device to determine if
they are adequately shielded from external RF energy or if you have any
questions. Switch off your device in health care facilities when any regulations
posted in these areas instruct you to do so. Hospitals or health care facilities may
be using equipment that could be sensitive to external RF energy.
Pacemakers
Pacemaker manufacturers recommend that a minimum separation of
15.3 centimeters (6 inches) be maintained between a wireless phone and a
pacemaker to avoid potential interference with the pacemaker. These
recommendations are consistent with the independent research by and
FCC DRAFT
109
Additional safety information
recommendations of Wireless Technology Research. Persons with pacemakers
should do the following:
• Always keep the device more than 15.3 centimeters (6 inches) from the
pacemaker
• Not carry the device in a breast pocket
• Hold the device to the ear opposite the pacemaker to minimize the potential
for interference.
If you suspect interference, switch off your device and move the device away.
Hearing aids
Some digital wireless devices may interfere with some hearing aids. If
interference occurs, consult your service provider.
■ Vehicles
RF signals may affect improperly installed or inadequately shielded electronic
systems in motor vehicles such as electronic fuel injection systems, electronic
antiskid (antilock) braking systems, electronic speed control systems, and air bag
systems. For more information, check with the manufacturer or its representative
of your vehicle or any equipment that has been added.
Only qualified personnel should service the device, or install the device in a
vehicle. Faulty installation or service may be dangerous and may invalidate any
warranty that may apply to the device. Check regularly that all wireless device
equipment in your vehicle is mounted and operating properly. Do not store or
carry flammable liquids, gases, or explosive materials in the same compartment
as the device, its parts, or enhancements. For vehicles equipped with an air bag,
remember that air bags inflate with great force. Do not place objects, including
installed or portable wireless equipment in the area over the air bag or in the air
bag deployment area. If in-vehicle wireless equipment is improperly installed and
the air bag inflates, serious injury could result.
Using your device while flying in aircraft is prohibited. Switch off your device
before boarding an aircraft. The use of wireless teledevices in an aircraft may be
dangerous to the operation of the aircraft, disrupt the wireless telephone
network, and may be illegal.
■ Potentially explosive environments
Switch off your device when in any area with a potentially explosive atmosphere
and obey all signs and instructions. Potentially explosive atmospheres include
areas where you would normally be advised to turn off your vehicle engine.
110
FCC DRAFT
Additional safety information
Sparks in such areas could cause an explosion or fire resulting in bodily injury or
even death. Switch off the device at refueling points such as near gas pumps at
service stations. Observe restrictions on the use of radio equipment in fuel
depots, storage, and distribution areas; chemical plants; or where blasting
operations are in progress. Areas with a potentially explosive atmosphere are
often but not always clearly marked. They include below deck on boats, chemical
transfer or storage facilities, vehicles using liquefied petroleum gas (such as
propane or butane), and areas where the air contains chemicals or particles such
as grain, dust, or metal powders.
■ Emergency calls
Important: Wireless phones, including this phone, operate using radio
signals, wireless networks, landline networks, and user-programmed
functions. Because of this, connections in all conditions cannot be
guaranteed. You should never rely solely on any wireless phone for
essential communications like medical emergencies.
To make an emergency call:
1. If the phone is not on, switch it on. Check for adequate signal strength.
2. Press the end key as many times as needed to clear the display and ready the
phone for calls.
3. Enter the official emergency number for your present location. Emergency
numbers vary by location.
4. Press the call key.
If certain features are in use, you may first need to turn those features off before
you can make an emergency call. Consult this guide or your service provider.
When making an emergency call, give all the necessary information as accurately
as possible. Your wireless phone may be the only means of communication at the
scene of an accident. Do not end the call until given permission to do so.
■ Certification information (SAR)
THIS MOBILE DEVICE MEETS GUIDELINES FOR EXPOSURE TO RADIO WAVES
Your mobile device is a radio transmitter and receiver. It is designed not to
exceed the limits for exposure to radio waves recommended by international
guidelines. These guidelines were developed by the independent scientific
organization (ICNIRP) and include safety margins designed to assure the
protection of all persons, regardless of age and health.
The exposure guideline for mobile devices employ a unit of measurement known
as the Specific Absorption Rate or SAR. The SAR limit stated in the ICNIRP
FCC DRAFT
111
Additional safety information
guidelines is 2.0 watts/kilogram (W/kg) transmitting at its highest certified
power level in all tested frequency bands. The actual SAR level of an operating
device can be well below the maximum value because the device is designed to
use only the power required to reach the network. That amount changes
depending on a number of factors such as how close you are to a base station.
The highest SAR value under ICNIRP guidelines for use of this device at the ear is
0.84 W/kg.
Use of device accessories and enhancements may result in different SAR values.
Additional SAR information may be provided under product information at
www.nokia.com.
Your mobile device is also designed to meet the requirements for exposure to
radio waves established by the Federal Communications Commission (USA) and
Industry Canada. These requirements set a SAR limit of 1.6 W/kg averaged over
one gram of tissue. The highest SAR value reported under this standard during
product certification for use at the ear is 1.3 W/kg and when properly worn on
the body is 1.08 W/kg. Information about this device model can be found at
http://www.fcc.gov/oet/fccid by searching the equipment authorization system
using FCC ID: QMNRM-120.
■ Hearing aid compatibility (HAC)
Warning: For hearing aid compatibility, you must turn off the Bluetooth
radio.
Your mobile device model complies with FCC rules governing hearing aid
compatibility. These rules require an M3 microphone or higher value. The
M-value of this device (M3), refers to lower radio frequency (RF) emissions. A
higher M-value generally indicates that a device model has a lower RF emissions
level, which may improve the likelihood that the device will operate with certain
hearing aids. Some hearing aids are more immune than others are to
interference. Please consult your hearing health professional to determine the M
rating of your hearing aid and whether your hearing aid will work with this
device. More information on accessibility can be found at
www.nokiaaccessibility.com.
For best results, fully extend the antenna for hearing aid compatibility.
112
FCC DRAFT
Additional safety information
■ Technical information
Feature
Specification
Dimensions
Width, 46.5 mm; length, 94 mm; depth, 22.3 mm
Weight
101 g with BL-5C Li-Ion Battery
Wireless networks
CDMA 800 and 1900 MHz, AMPS, GPS, and Bluetooth
wireless technology
Volume
74 cc
Frequency range (Tx)
AMPS: 824.04–848.97 MHz
PCS: 1851.25–1908.75 MHz
Cellular: 824.70–848.37 MHz
Bluetooth: 2402-2480 MHz
Frequency range (Rx)
AMPS: 869.04–893.97 MHz
PCS: 1931.25–1988.75 MHz
Cellular: 869.70–893.37 MHz
Bluetooth: 2402-2480 MHz
GPS
1575.42 MHz
■ Battery information
This section provides information about battery charging times with the Nokia
Compact Charger (AC-3), the Nokia Travel Charger (AC-4), talk-times, and
standby times. Be aware that the information in this section is subject to change.
For more information, contact your service provider.
See "Charging and discharging," p. 105 and "Battery," p. 14.
Charging times
The following charging times are approximate with the BL-5C 970 mAh Li-Ion
battery:
Travel Charger (AC-4): up to 1 hour 45 minutes
Compact Charger (AC-3): up to 3 hours
FCC DRAFT
113
Additional safety information
Talk and standby times
Operation times are estimates only and depend on signal strength, phone use,
network conditions, features used, battery age and condition (including charging
habits), temperatures to which the battery is exposed, and many other factors.
Talk time: 3.5 hours (digital)
Standby time: 8 to 14 days
114
FCC DRAFT
Index
Index
Numerics
1-touch dialing 49, 72
1-touch, assign 49
accessibility 8
active profile 65
alarm clock
repeat 90
settings 90
tone 90
allowed number 84
AMPS 5
analog service 86
answer calls 18, 72
antenna 15
anykey answer 71
applications, collection 105
automatic
keyguard 75
redial 71
update of service 72
update of time and date 71
voice mail 38
back cover
remove 16
replace 16
backlight time-out 68
battery
authentication guidelines 112
charge 17
charging times 119
information 119
overview 15
remove, replace 16
supported 109
talk and standby times 119
Bluetooth connectivity
overview 77
receive data 80
set up 79
settings 79
business cards 20
calendar
make notes 92
options 91
overview 91
receive, send notes 93
settings 93
view 92
call
forward 87
log 40
register 40
settings 71
summary 74
time of 41
timers 41
waiting 88
caller
groups 47
ID, send my 88
no ID ring tone 74
calling cards 72, 73
calls
answer 18, 72
conference 18
dismiss 19
display timer 74
duration 41
end 19
make 18
missed 40
received 40
restrictions 85
silence 19
camera
options 57
overview 54
photo sequence 56
photos 54
self-timer 55
videos 56
CDMA 5
CDMA SIM card slot 16
certification information 117
charger
connect 17
settings 82
supported 109
times 119
FCC DRAFT
115
Index
clock settings 70
collection applications 105
conference calls 18
confirmation tones 69
contacts
add 44
delete 50
edit 46
settings 47
countdown timer 98
currency converter 97
custom profile 65
gallery
folders 52
options 53
global positioning system 5
go to functions 14
GPS, see global positioning system
data
call duration 42
calls 74
transfer 108
date
change 70
settings 70
dialed numbers 40
dialing codes 44
digital service 86
display
icons and indicators 11
main menu 12
phone number 50
settings, main 66
settings, mini 68
distribution lists 36
DTMF tones, see touch tones
handsfree settings 83
headset
connect 17
settings 83
supported 109
hearing aid settings 82
help
get 7
in-phone 13
text activation 13, 76
keyguard, lock and unlock 20, 75
keypad tones 69, 76
keys and parts 9
earpiece, volume 19
electronic serial number 7
emergency calls 103, 117
end calls 19
enhancements
approved 109
settings 82
equalizer 64
ESN, see electronic serial number
extras 105
fax calls 42, 74
FCC information 118
116
file transfer 81
FM radio, see radio
folders 52
icons 11
indicators 10, 11
international prefix 73
Internet, see wireless Internet
language 75
lap time 100
location information sharing 71
lock code
change 85
preset 84
settings 13
logs
clearing 41
dialed numbers 40
FCC DRAFT
Index
missed calls 40
received calls 40
time of call 41
loopset settings 83
main display settings 66
main menu
grid view 12
list view 12
maintenance services 8
make calls 18
media player 59
MEID, see mobile equipment
identity
memory
checking status 75
shared 6
messages
minibrowser 39
multimedia 29
text 24
voice mail 37, 38
mini display settings 68
minibrowser
call duration 42
messages 39
missed calls 40
mobile equipment identity 7
mobile web 102
multimedia messages 29
create 31, 33
delete 35
folders 30
overview 29
read 32
reply 32
send 31
settings 35
music player 60
mute phone 19
my phone number, display 50
navigation key 75
network
approved for 5
services 5, 87
settings 86
no caller IDs 74
Nokia Care Contact Center 7
Nokia PC Suite 108
notes
make 94
options 95
overview 94
send 95
organizer 90
PC connectivity 108
phone
allowed numbers 84
care and maintenance 114
details 89
display number 50
keys and parts 9
language 75
lock 84
open to answer 72
set up 15
volume 19, 69
photos 54
play
music tracks 60
radio 62
power switch 17
predictive text 22
profiles 65
PTT, see push to talk
push to talk 106
quick keys 11
radio
options 62
play 62
two-way
received calls 40
record sound 63
register your phone 7
FCC DRAFT
117
Index
reject calls 19
repeat alarm 90
restore factory settings 88
ring
tone for no caller ID 74
tones 69
volume 69
roaming options 86
safety information
battery 119
certification 117
explosive environments 116
hearing aids 116
operating environment 115
overview 4
pacemakers 115
vehicles 116
SAR, see specific absorption rate
scroll keys 12
scrolling 12
security
code 13
keyguard 75
settings 13, 84
selection keys 10
self-timer, camera 55
send my caller ID 88
sequence of photos 56
set
alarm 90
date 70
time 70
settings
Bluetooth 79
calendar 93
call 71
charger 82
clock 70
contacts 47
enhancements 82
factory 88
handsfree 83
headset 83
hearing aid 82
main display 66
mini display 68
multimedia messages 35
118
network 86
overview 65
security 13, 84
standby mode 66
text messages 29
time and date 70
TTY/TDD 83
shared memory 6
shortcut keys 11
SIM card slot 16
snooze time-out 91
sound, record 63
specific absorption rate 118
speech, record 63
speed dials, see 1-touch dialing
split time 100
standby mode
overview 10
settings 66
standby time 119
start-up tone 76
stereo headset 17
stopwatch 100
switch phone on or off 17
talk time 119
text entry
changing language 21
predictive 22
standard 21
text messages
create 25
delete 28
folders 24
overview 24
read 26
reply 26
send 25
settings 29
templates 25
themes 69
time
change 70
lap 100
of calls 41
set 70
settings 70
talk and standby 119
FCC DRAFT
Index
timed profiles 65
to-do list
edit 96
make 95
options 96
view 96
tones
keypad 69, 76
overview 69
start-up 76
touch 76
touch tones 76
transfer files 81
TTY/TDD settings 83
turn phone on or off 17
two-way radio 106
UIM card slot 16
update service 72
vibrating alert 69
videos 56
voice
commands 76
privacy 86
recorder 63
voice mail
access 49
play 38
voice messages
automate 38
listen 38
mailbox number 37
overview 37
setting up mailbox 38
voice tags, use 49
volume 19, 69
wallpaper 66, 67, 68
warning tones 69
wireless Internet
access 102
clear cache 104
disconnect 104
make emergency call while
online 103
receive call while online 103
sign on 102
FCC DRAFT
119
Index
120
FCC DRAFT

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.3
Linearized                      : No
Page Count                      : 120
XMP Toolkit                     : XMP toolkit 2.9.1-13, framework 1.6
About                           : uuid:5fe8ce2d-3ca5-4493-8c2e-6d3318aa0a19
Producer                        : Acrobat Distiller 6.0.1 (Windows)
Create Date                     : 2006:06:20 10:59:54-07:00
Modify Date                     : 2006:06:20 10:59:54-07:00
Document ID                     : uuid:f7d2b49e-e1d3-494a-b571-37fd62447325
Format                          : application/pdf
Title                           : untitled

EXIF Metadata provided by EXIF.tools