Microsoft RM-121 CDMA Cellular Phone User Manual 2355 FCC Draft

Microsoft Mobile Oy CDMA Cellular Phone 2355 FCC Draft

Manual rev

1FCC DRAFTNokia 2355 User Guide
2FCC DRAFTPart No. XXXXXXXXX, Issue No. 1Copyright ©2005 Nokia. All rights reserved.Nokia, Nokia Connecting People, Nokia 2355, and the Nokia Original Enhancements logos are trademarks or registered trademarks of Nokia Corporation. Other company and product names mentioned herein may be trademarks or trade names of their respective owners.US Patent No 5818437 and other pending patents. T9 text input software Copyright ©1999-2004. Tegic Communications, Inc. All rights reserved.Includes RSA BSAFE cryptographic or security protocol software from RSA Security. Java is a trademark of Sun Microsystems, Inc.The information contained in this user guide was written for the Nokia 2355 product. Nokia operates a policy of ongoing development. Nokia reserves the right to make changes to any of the products described in this document without prior notice.UNDER NO CIRCUMSTANCES SHALL NOKIA BE RESPONSIBLE FOR ANY LOSS OF DATA OR INCOME OR ANY SPECIAL, INCIDENTAL, AND CONSEQUENTIAL OR INDIRECT DAMAGES HOWSOEVER CAUSED. THE CONTENTS OF THIS DOCUMENT ARE PROVIDED "AS IS." EXCEPT AS REQUIRED BY APPLICABLE LAW, NO WARRANTIES OF ANY KIND, EITHER EXPRESS OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE, ARE MADE IN RELATION TO THE ACCURACY AND RELIABILITY OR CONTENTS OF THIS DOCUMENT. NOKIA RESERVES THE RIGHT TO REVISE THIS DOCUMENT OR WITHDRAW IT AT ANY TIME WITHOUT PRIOR NOTICE.EXPORT CONTROLSThis device may contain commodities, technology, or software subject to export laws and regulations from the U.S. and other countries. Diversion contrary to law is prohibited.FCC/INDUSTRY CANADA NOTICEYour device may cause TV or radio interference (for example, when using a telephone in close proximity to receiving equipment). The FCC or Industry Canada can require you to stop using your telephone if such interference cannot be eliminated. If you require assistance, contact your local service facility. This device complies with part 15 of the FCC rules. Operation is subject to the condition that this device does not cause harmful interference.
Contents3FCC DRAFTContents1. Phone at a glance......................................................................... 92. Set up your phone...................................................................... 143. Text entry.................................................................................... 214. Messages ..................................................................................... 245. Call log ........................................................................................ 396. Contacts ...................................................................................... 427. Gallery ......................................................................................... 508. Media .......................................................................................... 519. Settings ....................................................................................... 5410.Organizer.................................................................................... 7111.Mobile web ............................................................................... 8112.Enhancements............................................................................ 8413.Reference information ............................................................... 85
For your safety4FCC DRAFTFor your safetyRead these simple guidelines. Not following them may be dangerous or illegal. Read the complete user guide for further information.Switch on safelyDo not switch the phone on when wireless phone use is prohibited or when it may cause interference or danger.Road safety comes firstObey all local laws. Always keep your hands free to operate the vehicle while driving. Your first consideration while driving should be road safety.InterferenceAll wireless phones may be susceptible to interference, which could affect performance.Switch off in hospitalsFollow any restrictions. Switch the phone off near medical equipment.Switch off in aircraftFollow any restrictions. Wireless devices can cause interference in aircraft.Switch off when refuelingDo not use the phone at a refueling point. Do not use near fuel or chemicals.Switch off near blastingFollow any restrictions. Do not use the phone where blasting is in progress.Use sensiblyUse only in the normal position as explained in the product documentation. Do not touch the antenna unnecessarily.Qualified serviceOnly qualified personnel may install or repair this product.
For your safety5FCC DRAFTEnhancements and batteriesUse only approved enhancements and batteries. Do not connect incompatible products.Water-resistanceYour phone is not water-resistant. Keep it dry.Backup copiesRemember to make back-up copies or keep a written record of all important information stored in your phone.Connecting to other devicesWhen connecting to any other device, read its user guide for detailed safety instructions. Do not connect incompatible products.Emergency callsEnsure the phone is switched on and in service. Press the end key as many times as needed to clear the display and return to the start screen. Enter the emergency number, then press the call key. Give your location. Do not end the call until given permission to do so.■About your deviceThe wireless devices described in this guide are approved for use on the CDMA 800 networks. Contact your service provider for more information about networks. When using the features in this device, obey all laws and respect privacy and the legitimate rights of others.Warning: To use any features in this device, other than the alarm clock, the device must be switched on. Do not switch the device on when wireless phone use may cause interference or danger.■Network ServicesTo use the device you must have service from a wireless service provider. Many of the features in this device depend on features in the wireless network to function. These network services may not be available on all networks or you may have to make specific arrangements with your service provider before you can utilize them. Your service provider may need to give you additional instructions for their use and explain what charges will apply. Some networks may have
For your safety6FCC DRAFTlimitations that affect how you can use network services. For instance, some networks may not support all language-dependent characters and services.Your service provider may have requested that certain features be disabled or not activated in your device. If so, they will not appear on your device menu. Contact your service provider for more information.■Shared memoryThe following device features may share memory: contacts; text messages; images, and tones in gallery; calendar notes; games; and applications. Use of one or more of these features may reduce the memory available for the remaining features sharing memory. If your phone displays a message that the memory is full when you try to use a shared memory feature, delete some of the information or entries stored in the shared memory features before continuing. Some of the features, such as photos, images, and tones in gallery; text messages; and applications may have a certain amount of memory specially allotted to them in addition to the memory shared with other features.
Welcome7FCC DRAFTWelcomeCongratulations on your purchase of the Nokia 2355 mobile phone. Your phone provides many functions which are practical for daily use, such as a hands-free loudspeaker, alarm clock, calculator, calendar, and more.■Register your phoneMake sure to register your phone at www.warranty.nokiausa.com or call 1-888-NOKIA-2U (1-888-665-4228) so that we can serve your needs better if you should call a customer center or to have your phone repaired.■Getting helpFind your phone labelIf you need help, Nokia Customer Care is available for assistance. Before calling, we recommend that you write down the following information and have it available:• Electronic serial number (ESN)The ESN is found on the type label, which is located beneath the battery on the back of the phone.Nokia support and contact informationCheck www.nokia.com/support or your local Nokia Web site for the latest version of this guide, additional information, downloads and services related to your Nokia product.On the Web site, you can get information on the use of Nokia products and services. If you need to contact customer service, check the list of local Nokia Care contact centers at www.nokia.com/customerservice.
Welcome8FCC DRAFTUpdatesCheck www.nokia.com/support or your local Nokia Web site for the latest version of this guide, additional information, downloads, and services related to your Nokia product.Accessibility solutionsNokia is committed to making mobile phones easy to use for all individuals, including those with disabilities. For more information visit the Web site at www.nokiaaccessibility.com.
Phone at a glance9FCC DRAFT1. Phone at a glance■Open the foldTo use the device, you must open the fold. Do not try to open the fold more than the hinge allows.To close the fold, push from the top part of the device, not from the hinge.■Device keys, indicators, and connectors• Earpiece and speakerphone (1)• Display screen (2)• Left selection key (3)• Volume keys (4)• Flashlight key (5)• Call key (6)• Keypad (7)• Charger connector (8)— under the rubber cover• Headset connection (9)—under the rubber cover• 4-way scroll key (10) • Right selection key (11)• End and power key (12)• Flashlight lens (13)• Microphone (14)
Phone at a glance10FCC DRAFT■Standby modeThe standby mode is home base and indicates your phone is in idle mode.Signal strength (1)—A higher bar indicates a stronger network signal.Battery level (2)—A higher bar indicates more power in the battery.Menu (3)—Press the left selection key to select this option.ContactsGo to (4)—Press the right selection key to select this option.■Quick keysIn the standby, the four-way scroll key instantly takes you to frequently-accessed menus:•Scroll up key—View contacts.•Scroll right key—View the calendar.•Scroll down key—View contacts.•Scroll left key—Write a text message.■Indicators and iconsDepending on your wireless service provider, your phone may support some of the following indicators and icons:You have new text or picture messages. See "Read and reply," p. 26.You have attached a picture to a text message. See "Write and send," p. 24.You have new voice messages. See "Voice messages," p. 35.Your phone’s keypad is locked. See "Lock the keypad (keyguard)," p. 20.Your phone is set to the Silent profile. See "Profiles," p. 54.The alarm clock is On. See "Alarm clock," p. 71.The countdown timer is running. See "Countdown timer," p. 77.The stopwatch timer is running in the background. See "Stopwatch," p. 78.
Phone at a glance11FCC DRAFTIntegrated handsfree speaker is active. See "Using the loudspeaker," p. 19.The timed profile is selected. See "Profiles," p. 54. or An enhancement is connected to the phone. See "Enhancement settings," p. 65.You are in a digital network. See "Network Services," p. 5.You are in a 1XRTT network. See "Network Services," p. 5.■Phone menusPhone features are grouped according to function and are accessed through the main menus. Each main menu contains submenus and lists from which you can select or view items and customize your phone features. You can access these menus and submenus by using the scroll method or by using a shortcut.Note: Some features may not be available, depending on your network. For more information, contact your wireless provider.User interface featuresYou can choose from two types of menu interface: List and Grid. See "Menu view," p. 64 for more information.In the List interface, full-color images introduce the menu. Scroll up and down to navigate through the menus. The menu icons shown in this user guide represent the List interface icons.In the Grid interface, multiple menu icons appear on a single display. Use the four-way scroll keys to navigate through the icons. Scroll method1. In the standby mode, select Menu and scroll up and down through the main menus.As you scroll through the menus, the menu number appears in the upper right corner of the display. Below the number is a scroll bar with a tab that moves up or down on the right side of the
Phone at a glance12FCC DRAFTdisplay screen as you scroll through the menus, providing a visual representation of your current position in the menu structure.2. When you arrive at a menu, press the left selection key (or Select) to enter submenus.Select Back (the right selection key) to return to the previous menu.Press the end key to return to the standby mode from any menu or submenu.ShortcutsYou can go directly to almost any menu or submenu, as well as activate most features, by using a shortcut.In the standby mode, select Menu; then within 3 seconds, press the key or keys associated with the menu function you would like to view or activate. For example, to go directly to the calculator, select Menu 7-4 from the standby mode (Menu > 7Organizer > 4Calculator). After a brief pause, the calculator opens.Shortcut keysThe four-way scroll keys and the zero key also have menu shortcuts.• Scroll left to go to the SMS text editor.• Scroll right to view the monthly calendar.• Scroll up or down to see a list of names in Contacts.• A long press of the 0 (zero) launches the browser.In-phone helpMany features have brief descriptions (help text) which can be viewed on the display. To view these descriptions, scroll to a feature and wait for about 15 seconds. Select More to view all of the description, or select Back to exit.In order to view the descriptions, you must first activate help text.In the standby mode, select Menu > Settings > Phone settings > Help text activation > On or Off.■Lock code security settingsYour device has a security option allowing you to lock your phone with a code. When the code is set and turned on, no outgoing calls are allowed and the menu
Phone at a glance13FCC DRAFTcannot be accessed without entering the correct code first. This prevents unauthorized outgoing calls or access to any information stored on your device.The Security option is in the Settings menu. The first time you access the Security option, you must enter a lock code. The default lock code may vary depending on your wireless service provider. The preset lock code may be the last four digits of your phone number, 1234 or 0000. If none of these work, contact your wireless service provider for help.You must enter the lock code to access the following Security option:1. In the standby mode, select Menu > Settings > Security.2. Enter the lock code, and select OK. See ""Change lock code," p. 66" 66.■Go to functionsThe Go to menu is the right selection key on your phone. With this function, you can quickly access your most frequently used functions from the Go to menu in the standby mode. See "Personal shortcuts," p. 55 for more information on choosing and organising functions in Go to.
Set up your phone14FCC DRAFT2. Set up your phone■AntennaYour device has an internal antenna located towards the top of the phone. Hold the phone as you would any other telephone with the antenna area pointed up and over your shoulder.Note: As with any other radio transmitting device, do not touch the antenna unnecessarily when the device is switched on. Contact with the antenna affects call quality and may cause the device to operate at a higher power level than otherwise needed. Avoiding contact with the antenna area when operating the phone optimizes the antenna performance and the battery life. Not touching the antenna area during a phone call optimizes the antennae performance and the talktime of your device.■Insert the batteryNote: Always switch the device off and disconnect the charger before removing the battery. Always use original Nokia batteries. See "Batteries and chargers," p. 85.UIM card slotYour phone has a UIM (CDMA SIM) card slot built into the mechanics. However, the UIM is not functional in this phone model. Avoid placing anything into the UIM card slot.
Set up your phone15FCC DRAFTInsert the batterySlide the back cover off to remove it (1). Insert the battery so that the gold-colored connectors on the battery align with the connectors on the device (2). Replace the back cover: align the catches (3) together, and slide the cover (4) forward.
Set up your phone16FCC DRAFTCharge the battery1. Plug the charger transformer into a standard ac outlet.2. Open the rubber cover located at the top of the phone. Connect the charger plug into the connector in the device.The battery indicator bar starts scrolling. When the battery is fully charged, the bar stops scrolling. 3. Disconnect the charger from the device and the ac outlet.■Turn your phone on and offWarning: Do not switch the device on when wireless phone use is prohibited, or when it may cause interference or danger.The on-off function for this device is combined with the end key. To switch the device on or off, press and hold the end key.When you switch the device on, it may request a PIN code or security code. Enter the code and select OK. The preset security code is 12345. For information about device codes, see "Security settings," p. 65.■Connect the headsetA compatible headset may be purchased with your phone or separately as an enhancement. See "Enhancements," p. 84 for information.
Set up your phone17FCC DRAFT1. Plug the headset connector into the connector at the top end of your phone.2. Position the headset on your ear. The icon appears in the standby mode.With the headset connected, you can make, answer, and end calls as usual.• Use the keypad to enter numbers.• Press the call key to place a call.• Press the end key to end a call.■Make a callUsing the keypad1. Enter the phone number (including the area code), and press the call key. (To delete a character to the left of the cursor, select Clear.)2. Press the end key to end the call or End call to cancel the call attempt.Using the contacts list1. In the standby mode, scroll up or down to the entry you wish to view.2. Press the call key to make the call, or select Details to view details of the entry.See "Contacts," p. 42 for more information on using the contacts list.Using the last dialed number1. In the standby mode, press the call key to display the last 20 numbers dialed.2. Scroll to the number (or name) you wish to redial, and press the call key.
Set up your phone18FCC DRAFTCarrier selection provisioning (CSP)CSP functionality enables you to choose a preferred long distance carrier by entering a carrier code. The carrier code default value is null. See ""Preferred carrier," p. 56" 56.Note: CSP function affects only long distance and international calls.If CSP is active, a 2-digit preferred carrier code is displayed with the first digit of the phone number entered. This code appears after you press the call key and before you make the call.1. Enter the long distance or international number you want to call, press the call key, and verify that the 2-digit CSP code appears after the first digit of the number entered.2. Determine whether you want to turn the CSP function on or off. If you select On, you will be prompted to change or enter the CSP code. If you select Off, the CSP code will remain the same.■Answer callsAnswer or silence an incoming call1. Press the call key to answer the call.2. Press the end key or Silence to mute the ringing tone; then select Answer to answer the call, or do nothing, and the call is eventually diverted to voicemail.Answer a call with the keypad lockedTo answer a call with the keypad locked, simply press the call key. During the call, all features function as normal. When you end the call or do not answer it, the keypad automatically re-locks. See "Lock the keypad (keyguard)," p. 20 for more details.When the phone is locked, calls still may be possible to the official emergency number programmed into your phone. Adjust the earpiece volumeWhile in a call, press up or down on the volume key, located on the left side of the phone, to adjust the volume of the earpiece.
Set up your phone19FCC DRAFTWhen adjusting the volume, a bar chart appears in the display indicating the volume level.Using the loudspeakerYou can use your phone as a loudspeaker during a call. Do not hold the phone to your ear during the loudspeaker operation.• To activate the loudspeaker, select Loudsp.• To deactivate the loudspeaker during a call, select Handset.The loudspeaker is deactivated automatically when a call (or a call attempt) ends or when certain enhancements are connected.
Set up your phone20FCC DRAFTOptions during a callMany of the options that you can use during a call are Network Services. Check with your wireless service provider for more information.1. Select Options during a call to display a list of options available during a call.2. Select an option to activate it or enter its submenu.■Lock the keypad (keyguard)The keypad lock protects the device from accidental key presses. To lock or unlock the keypad, press the left selection key and quickly press *. Keyguard is not activated when you close the fold.To answer a call when the keyguard is on, press the call key. When you end or decline the call, the keypad automatically relocks. When the keyguard is on, calls may be possible to the official emergency number programmed into your phone. Enter the emergency number and press the call key.
Text entry21FCC DRAFT3. Text entryYou can use two methods for entering text and numbers: standard mode and predictive text mode.■Standard modeStandard mode is the only way to enter text into the contacts list, and to rename caller groups.Text (Abc)• Press a key once to insert the first letter on the key, twice for the second letter, etc. If you pause briefly, the last letter in the display is accepted and your phone awaits the next entry.• Press 0 to enter a space, thereby accepting a completed word.• Press 1 as many times as necessary to scroll through a list of commonly used characters.• Press * to display a complete list of special characters.• Press and hold # to access Editor settings > Number mode, Dictionary on or Dictionary off, or Writing language.Numbers (123)To switch to 123 mode from Abc mode:1. Press and hold #.2. At the Editor settings menu list, select Number mode.The phone will return to the message entry screen and switch the ABC icon in the upper left corner of the display to the 123 icon.Change languageTo change the language, do the following:1. Press and hold #.
Text entry22FCC DRAFT2. At the Editor settings menu list, select Writing language, and the new language.The phone will return to the message entry screen, and you can compose in the new language.Punctuation and special charactersWhile at any text entry screen, press * to display special characters (press and hold * if predictive text is on). Press * again to cycle through all available characters. Scroll to navigate through the list of special characters. Once a character is highlighted, select Use to insert the character into your message.■Predictive text modePredictive text input allows you to write messages quickly using your keypad and the built-in dictionary. It is much faster than the standard mode method, because for each letter, you only press the corresponding key on your keypad once.Activate and deactivateAt any text entry screen, select and hold Options or select Options > Dictionary on or Dictionary off.Predictive text is turned on and off, depending on its previous mode.Enter textThe illustration below simulates your display each time a key is pressed. For example, to write Nokia with predictive text on and with the English dictionary selected, press each of the following keys once:• Press 0 to enter a space and begin writing the next word.• If a displayed word is not correct, press * to see other matches. To return to the previous word in the list of matches, select Previous.• If ? appears after a word, it is not in the dictionary. Select Spell to add the word to the dictionary.
Text entry23FCC DRAFT• Press 1 to insert a period into your message.• Press and hold * to display special characters. Press * again to cycle through all available characters.• Press and hold the specific number key to enter a number.• Press and hold # to access Editor settings > Number mode, Dictionary on or Dictionary off, or Writing language.■Change case and modePress # to switch between uppercase, lowercase, and sentence case, as well as standard and predictive text modes. Case and mode are indicated by the following icons that appear in the upper left of the display screen. Uppercase text: standard mode is on. Lowercase text: standard mode is on. Sentence case text: standard mode is on. Only available at the beginning of a sentence. Uppercase text: predictive text is on. Lowercase text: predictive text is on. Sentence case text: predictive text is on. Only available at the beginning of a sentence.■Delete textTo delete text, use one of the following options:• Select Clear to backspace the cursor and delete a character.• Select and hold Clear to backspace continuously and delete characters.
Messages24FCC DRAFT4. MessagesIf you have subscribed to a messaging service through your wireless provider, you can send and receive messages to compatible phones that also subscribe to a compatible message service. You may also be able to send and receive picture messages and e-mail messages.When composing text messages, picture messages, or multimedia messages, check the number of characters allowed in the top right corner of the message. Using special (Unicode) characters takes up more space. If there are special characters in your message, the indicator may not show the message length correctly. Before the message is sent, the phone will tell you if the message exceeds the maximum length allowed for one message. Note: When sending messages, your device may display Message sent. This is an indication that the message has been sent by your device to the message center number programmed into your device. This is not an indication that the message has been received at the intended destination. For more details about messaging services, check with your service provider.Important: E-mail messages or multimedia message objects may contain viruses or otherwise be harmful to your device. Do not open any attachment if you are not sure of the trustworthiness of the sender.■Text messagesWrite and send1. In the standby mode, select Menu > Messages > Text messages > Create message.To go quickly to the Create message display, scroll left from the standby mode.After a brief pause, the message entry screen appears in the display.2. Compose a message using the keypad and select Options.3. Select Send to > Send to number, Send to many or Send to distrib. list. Send to distrib. list option appears only if a distribution list has been created. See "Distribution lists," p. 27.
Messages25FCC DRAFT4. Enter the recipient’s phone number or e-mail address, or select Search to retrieve a number from your contacts list; select Send.TemplatesTemplates are short, prewritten messages which can be recalled and inserted into new text messages when you are short on time.1. In the standby mode, select Menu > Messages > Text messages > Create message.2. Select Options > Use template and one the available templates.3. Complete your new message, and select Options > Send to > Send to number, Send to many or Send to distrib. list.Send to distrib. list option appears only if a distribution list has been created. See "Distribution lists," p. 27.4. Enter the recipient’s phone number or e-mail address, or select Search to retrieve an entry from your contacts list, and select Send.OptionsWhen you create a text message, depending on the mode of text input you are using and the features supported by your wireless service provider, some or all of the following options are available:Send to—Choose Send to number, Send to many or Send to distrib. list to send the message to one ore more recipients. (Send to distrib. list option appears only if a distribution list has been created. See "Distribution lists," p. 27.)Send options—Set the priority of the message, choose to receive a delivery note when a message is sent, or to send a callback number.Clear text—Erase the text from the message editor.Insert contact—Insert a name from your contacts list into your message.Insert number—Insert a phone number or find a phone number in the contacts list.Save message—Select Drafts to save the message to your drafts folder; select Templates to save the message as one of your predefined templates.Exit editor—Automatically saves the message to the Drafts folder and exits the message editor.Use template—Insert a predefined template into your message.Insert smiley—Insert the smiley face of your choice into your message.
Messages26FCC DRAFTInsert word—Enter the text of a new word that might not appear in the dictionary.Edit word—Edit the text of a new word that might not appear in the dictionary.Insert symbol—Insert a special character into your message.Matches—View matches found in the dictionary for the word you want to use.Dictionary on or Dictionary off—Turn the dictionary on or off.Writing language—Choose the language of the text editor.Read and replyWhen you receive a message, your phone beeps, and 1 message received and the unopened letter icon ( ) appear in the display.When you have unopened messages in your Inbox, is shown in the upper left corner of the screen as a reminder.1. Select Show to read the message, or Exit to dismiss the notification.Scroll up or down to view the whole message if necessary.2. Select Options > Reply.3. Select a Reply option; then compose your reply using the keypad.4. Select Options > Send. When you read a text message, the following options are available:Delete—Discard the message.Reply—Reply to the message. Create the message, and select Options > Send. The sender’s phone number or e-mail is used as the defaultUse number—Choose Save, Add to contact, Send message, or Call.Save—Save the message to a folder.Forward—Forward the message to another phone number.Rename—Edit the title of the message.When you reply to a text message, your options are the same as when creating a message. See "Options," p. 25 for more information.Change sending options1. In the standby mode, select Menu > Messages > Text messages > Message settings > Sending options.
Messages27FCC DRAFT2. Select the setting you wish to change:Priority—Set the priority of the note.Delivery note—A note is sent to you confirming delivery of the message.Send callback number—Include your callback number in a text message.Change other settingsWhen the message memory is full, your phone cannot send or receive any new messages. However, you can set your phone to automatically replace old messages in the Inbox and Outbox folders when new ones arrive.1. In the standby mode, select Menu > Messages > Text messages > Message settings > Other settings.2. Select the setting you wish to change:Message font size—Select Small font or Large font.Message overwriting—Select Sent items only, Inbox only, S. items & Inbox, or Off. Save to sent items as sending—Select to Always save, Always prompt, or Off.Queue msgs. when digital unavailable—Select On, On prompt, or Off.Distribution listsYou can send a text message to multiple recipients at one time. First, you must create a distribution list using the entries in your contacts list.1. In the standby mode, select Menu > Messages > Text messages > Distribution lists.2. Select Options > Add list.3. Enter the name of the list and select OK.4. With the list highlighted, select Options > View list > Add contact.5. Select the contact you want to add to the distribution list.6. Select the phone number you want to add.Repeat steps 4–6 to add additional contacts to the distribution list.Send a messageTo send a message to all contacts in a created distribution list:
Messages28FCC DRAFT1. In the standby mode, select Menu > Messages > Text messages > Create message.After a brief pause, the message entry screen appears in the display.2. Compose a message using the keypad and select Options.3. Select Send to > Send to distrib. list.4. Select the distribution list you are sending to, and select OK.Options1. In the standby mode, select Menu > Messages > Text messages > Distribution lists.2. Highlight a distribution list and select Options.3. Select one of the following:Add list—Create a distribution list using your contacts list.View list—View the list of contacts or numbers in a distribution list that you have created.Send message—Send a text message to the distribution list selected.Rename list—Rename a distribution list that you have created.Clear list—Delete the contacts or numbers from a distribution list that you have created.Delete list—Delete a distribution list that you have created.■Text message foldersSave messages to foldersYou can save sent or received messages to an existing folder or to a folder that you have created.1. Open the received message or create a new message, and select Options.2. Select Save message and scroll to the folder available:Sent items—Messages that have been sent by the network are automatically stored in the Sent items folder.Drafts—Messages that you create can be stored in the Drafts or Templates folder.
Messages29FCC DRAFTArchive—Store messages that have been read in the Archive folder.Templates—Prewritten templates are stored in the Templates folder. You can also save received messages in the Templates folder to use as templates. Preloaded and saved templates can be edited and customized. My folders—Keep your messages organized by creating custom folders and saving some of your messages there. Select Options > Add folder to add a custom folder. You can also select Options > Rename folder or Options > Delete folder to rename or delete a folder you have created.Note: Only folders created in My folders can be deleted. The Inbox, Outbox, Sent items, Drafts, Archive, and Templates folders are protected. When you delete a folder, all messages in the folder are also deleted.View saved messages1. In the standby mode, select Menu > Messages > Text messages.2. After a brief pause, select folder containing the message you wish to view.3. Once the folder opens, select the message you wish to view.■Multimedia messagesA multimedia message (MMS) is a network service. If your wireless service provider supports this feature, then an MMS can be created in SMIL presentation format. SMIL presentation format means that MMS can hold multiple slides each containing1image, 1 sound clip, and text, or a single slide that contains video and text only. If supported by your wireless service provider, you may also be able to receive business cards and calendar notes. Maximum MMS size is reached at 100 KB. If the maximum size is exceeded, the phone may not be able to send or receive the message. Once you save the MMS, you can play back the video clip, use the image as a screen saver, or use the sound as a ringing tone. In some networks, you may receive a message that includes an internet address where you can view the multimedia message. The default setting of the multimedia message service is generally on. The appearance of a multimedia message may vary depending on the receiving device.
Messages30FCC DRAFTNote: Only devices that offer compatible multimedia message or e-mail features can receive and display multimedia messages. Multimedia message objects may contain viruses or otherwise be harmful to your device or PC. Do not open any attachment if you are not sure of the trustworthiness of the sender.Note: When your phone is dedicated to a call in progress, an application (such as a game), or an active web browser connection, the phone cannot receive multimedia messages.Multimedia messaging supports JPEG, GIF, PNG, AGIF, BMP and WBMP picture formats; MIDI, SP-MIDI and monophonic ringing tones; QCELP and AMR audio encoders and decoders; and H.263 and MPEG4 video format.The appearance of a multimedia message may vary depending on the receiving device.Copyright protections may prevent some images, ringing tones, video clips and other content from being copied, modified, transferred, or forwarded.Write and send1. In the standby mode, select Menu > Messages > Multimedia msgs. > Create message.2. Enter the text of your message, and select Options > Insert > Image, Sound clip, Video clip, or Slide.3. Choose the object, and select Insert.4. Select Options > Send to number, Send to e-mail or Send to many.5. Enter the recipient’s phone number or e-mail address, or select Search to retrieve a number from your contacts list, and select OK.Sending optionsWhen you create an MMS, depending on the mode of text input you are using, whether you have already attached content, and whether your phone supports the feature, some or all of the following options are available:Send to number—Send the MMS to a single recipient’s phone number.Send to e-mail—Send the MMS to a single recipient’s e-mail address.Send to many—Send the MMS to more than one phone number or e-mail address.Insert—Insert an Image, Sound clip, Video clip, or Slide into the MMS.
Messages31FCC DRAFTDelete—Delete a Video clip, Image, Sound clip, or Slide that has been inserted into the MMS.Clear text—Erase the text from the message editor.Preview—View the MMS before sending it.Previous slide—Go back to the previous slide.Next slide—Jump to the next slide.Slide list—View a list of all slides for the MMS.Slide timing—Defines the display time of a slide.Place text first or Place text last—Choose where the text appears in relation to the attached content in a slide.Save message—Select Saved items to save the message into your saved items folder.More options—Choose Insert contact, Insert number, Message details, or Edit subject.Exit editor—Saves the message to your Saved items folder automatically, and leave the message editor.Insert smiley—Insert the smiley face of your choice into your message. Insert word—Enter the text of a new word that might not appear in the dictionary.Edit word—Edit the text of a new word that might not appear in the dictionary.Insert symbol—Insert a special character into your message.Matches—View matches found in the dictionary for the word you are trying to use.Dictionary on or Dictionary off—Turn the dictionary on or off.Writing language—Choose the language of the text editor.Read and replyWhen a multimedia message is being received, appears. Once the message has been fully downloaded, and Multimedia message received appear.1. To view the message, select Show.2. To view the message later, select Exit > No when asked to discard.3. While viewing the message, select Options > Reply.4. Compose your reply using the keypad.
Messages32FCC DRAFT5. Select Options > Send. Note: If blinks and Multimedia message memory full, view waiting message? appears, delete some of your old multimedia messages. See "Delete text or multimedia messages," p. 34 for more information.Reading optionsWhen you open an MMS that is in SMIL presentation format and if supported by your phone, some or all of the following options are available:Play presentation—Play the entire presentation, including any image, sound clip, video clip, business card, or calendar note that is attached.Continue present.—Appears if you have stopped a slide presentation without playing it all the way through. The presentation will begin with the slide in focus.View text—View the text attached to the MMS.Open image—View the image, if one is included.Open sound clip—Select an option associated with the sound clip, if one is included.Open video clip—Select an option associated with the video clip, if one is included.Open bus. card—Open the business card, if one is included.Open calend. note—Open the calendar note, if one is included.When you open an MMS that contains objects (pictures, tones, or text) that are not part of an SMIL presentation and if supported by your phone, the following options are available:Zoom—Enlarge the picture.Set contrast—Adjust the contrast of the image.Save image—Save a picture, if included, to the Gallery menu.Play—Listen to a sound clip or play a video, if one is included.Save sound clip—Save a sound clip, if included, to the Gallery menu.Save video clip—Save a video clip, if included, to the Gallery menu.Details—View the file name, size, date created, and other details of the object in focus.Open calend. note—Open the attached calendar note, if one is included.Open bus. card—Open the attached business card, if one is included.
Messages33FCC DRAFTThe following options are available when you open any MMS, if supported by your phone or wireless service provider.Delete message—Delete a saved message.Reply or Reply to all—Reply to the message. Select Options > Send. The sender’s phone number or e-mail is used as the default.Use detail—Extracts any phone numbers, e-mail addresses or URLs found in an MMS and, depending on the content, allows you to open, save, or use.Edit—Edit the message. You can only edit messages that you have written.Forward to no.—Forward the message to another number.Forward to e-mail—Forward the message to an e-mail address.Forward to many—Forward the message to several recipients.Message details—View the message subject, size, and class.Multimedia message settingsYou will need to define the MMS settings. MMS settings include saving your messages to the Sent items folder, receiving delivery reports, and more.1. In the standby mode, select Menu > Messages > Multimedia msgs. > Message settings.2. Select on of the following options, to activate it or enter its submenu:Save sent messages—Select Yes or No to save sent multimedia messages to the Sent items folder.Delivery reports—Select On or Off to be notified by the network if the message was sent successfully.Scale image down—Select Yes or No to scale the image size smaller.Default slide timing—Default time is 12 seconds. You can customize the time to your preference.Allow multimedia reception—Select Yes, No, or In home network for your multimedia service. In home network means that you will not receive any multimedia messages that are received outside the home network until you return to the home network.Incoming multi- media messages—Select Retrieve to automatically download multimedia messages or Ask first to receive a prompt each time a multimedia
Messages34FCC DRAFTmessage is waiting to be downloaded. Ask first allows you to retrieve or reject each MMS on an individual basis.Multimedia message foldersYou can save created messages to the Saved items folder. 1. Open the received message or create a new message and select Options.2. Select Save message > Saved items.Sent or received messages are automatically saved to one of the following folders:Inbox—Multimedia messages are automatically stored here after they are received or if you select Back when Multimedia message received appears. Multimedia messages that have been read are also stored in the inbox.Outbox—Multimedia messages that you have created and sent are temporarily stored here until they are sent by the network.Sent items—Multimedia messages that have been sent by the network are automatically stored here.■Delete text or multimedia messagesIf your text message memory is full and you have more messages waiting at the network, blinks on the screen. If your multimedia message memory is full, blinks on the screen and Multimedia message memory full, view waiting message? appears.You can do the following:• Read some of the unread messages, and delete them.• Delete messages from some of your folders.A single messageTo delete a single message, you need to open it first.1. In the standby mode, select Menu > Messages > Text messages or Multimedia msgs..2. Select the folder containing the message you wish to delete.3. Select the message you wish to delete. 4. Select Options > Delete message.
Messages35FCC DRAFT5. Select OK to delete the message or Back to exit.All SMS messages in a folder1. In the standby mode, select Menu > Messages > Text messages > Delete messages.2. Select the folder containing the messages you wish to delete and one of the following:All—Deletes all messages in the folder you choose.All read—Deletes all read messages in the folder you choose.All unread—Deletes all unread messages in the Inbox.3. Select OK to empty the folder.All MMS messages in a folder1. In the standby mode, select Menu > Messages > Multimedia msgs. > Delete messages.2. Select the folder containing the messages you wish to delete and one of the following:Inbox—Deletes all messages in Inbox folder.Outbox—Deletes all messages in Outbox folder.Sent items—Deletes all messages in Sent items folder.Saved items—Deletes all messages in Saved items folder.3. Select OK to empty the folder.■Voice messagesIf you subscribe to voice mail, your wireless provider will furnish you with a voice mailbox number. You need to save this number to your phone to use voice mail. When you receive a voice message, your phone lets you know by beeping, displaying a message, or both. If you receive more than one message, your phone shows the number of messages received.
Messages36FCC DRAFTSave voice mailbox numberYour wireless provider may have already saved your voice mailbox number to your phone. If so, the number will appear in the display in step 2. Select OK to leave the number unchanged.1. In the standby mode, select Menu > Messages > Voice messages > Voice mailbox number.After a brief pause, the Voice mailbox number screen appears in the display.2. If the box is empty, enter the voice mailbox area code and number.3. Select OK. Call and setup your voice mail1. Once you have saved the voice mailbox number, press and hold 1. 2. When you connect to voice mail and the prerecorded greeting begins, follow the service’s automated instructions to setup your voice mail.Listen to your voice messagesOnce you have setup voice mail, you can dial the voice mailbox number in one of four ways:• Dial the voice mailbox number using the keypad.• Press and hold 1.• Select Listen if there is a notification message in the display.• In the standby mode, select Menu > Messages > Voice messages > Listen to voice messages. Once you connect and the prerecorded greeting begins, follow the automated instructions to listen to your voice messages.Clear voicemail iconTo clear the new voicemail icon from the standby mode, select Menu > Messages > Voice messages > Clear voice mail icon.
Messages37FCC DRAFTAutomate voice mailYou can insert special characters called dialing codes into phone numbers such as voice mail, and save the number to a 1-touch dialing location. Dialing codes instruct the receiving system to pause, wait, bypass, or accept the numbers that follow them in the dialing string.Note: Voice mail services vary by service provider. The following instructions are examples of common operations. Please check with your service provider for specific instructions for using your voice mail service.Write down voice mailbox number and process1. Write down your voice mailbox number.2. Call and check your voice mail as you normally would.3. Write down your interaction with the recorded prompts step-by-step. Keep in mind that each voice mail service may vary. However, it should look something like this:Dial 2145551212, pause 5 seconds, press 1, pause 2 seconds, press 1234, press #.Be precise; you will need this information in "Setup voice mail with dialing codes," p. 37.Insert dialing codesPress * repeatedly to cycle through dialing codes. Once the desired code appears in the display, pause briefly and the code is inserted into the dialing string.The following dialing codes are available: *—Bypasses a set of instructions.p—Pauses for 2.5 seconds before sending any numbers that follow.w—Waits for you to press the call key before sending the numbers or codes that follow.Setup voice mail with dialing codes1. In the standby mode, select Menu > Contacts > Speed dial.2. Scroll to an empty 1-touch dialing slot and select Assign.3. Enter your voice mailbox number, including the area code.
Messages38FCC DRAFT4. Refer to dialing codes and enter any codes as necessary using the information that you wrote down from "Write down voice mailbox number and process," p. 37.For example, if you pause for 5 seconds after connecting to voice mail, enter p twice after the voice mailbox number, for example, 2145551212pp.5. Enter any remaining pauses or other information that allows you to listen to your messages, and select OK.6. Enter a name (such as Voice Mail), and select OK.To dial and listen to your voice mail, press and hold the assigned 1-touch dialing key while in standby mode.If 1-touch dialing is off, the phone displays a prompt asking if you would like to turn 1-touch dialing on.■Minibrowser messagesMinibrowser messaging is a network service. See "Network Services," p. 5 for more information.If your wireless service provider supports this feature, you can check for e-mail messages using the minibrowser. In the standby mode, select Menu > Messages > Minibrowser messages, and select Connect.
Call log39FCC DRAFT5. Call logCall log stores information about your last 30 missed, received, and dialed calls respectively and adds the total duration of all calls. When the number of calls exceeds the maximum, the most recent call replaces the oldest.Whether viewing missed, received, or dialed calls, select Options to access these menu options:Time of call—Displays the date and time of the call.Send message—Sends a message to the number.Edit number—Edits the number and associates a name with the number.Save—Enters a name for the number and saves it to your contacts list.Add to contact—Adds a number to a contact and saves it to your contacts list (available only with the number not yet stored in your contacts list).Delete—Clears the number from memory.Call—Calls the number.■View missed callsThe missed calls feature does not function with your device switched off. Missed calls are calls you have never answered. To view missed calls, do the following:1. In the standby mode, select Menu > Call log > Missed calls, or with missed call notification displayed, select List.2. Scroll to a name or number, and select Options and an option to view or activate.■View received callsReceived calls are calls that have been answered.1. In the standby mode, select Menu > Call log > Received calls.2. Scroll to a name or number, and select Options and an option to view or activate.■View dialed numbersDialed calls are previous numbers you have dialed from your device.
Call log40FCC DRAFT1. In the standby mode, press the call key, or select Menu > Call log > Dialed numbers.2. Scroll to a name or number, and select Options.3. Select an option to view or activate.View call timesYou can make or receive calls to or from the same number and view up to five calls displayed with the time each call occurred. Your device clock must be set for this feature to work accurately.1. In the standby mode, select Menu > Call log > Missed calls, Received calls, or Dialed numbers.2. Highlight your desired name or number, and select Options > Time of call.3. Scroll down to view the call times from this number; select Back to return to the options list. ■Delete call logsYou can delete any missed, dialed, or received calls from your device memory.1. In the standby mode, select Menu > Call log > Delete recent calls list.2. Select the call type you want to clear: All, Missed, Received, or Dialed.■Call durationContact your network operator for the actual calls and services invoice, which may vary depending on network features, rounding off for billing, taxes, and so forth. Select Menu to view the duration of your last call, all your dialed calls, all your received calls, all your calls, your life timer, or to clear your timers. After you select Clear timers, enter your lock code, and select OK. See ""Change lock code," p. 66" 66.Note: All call timers, except the life timer, are reset to zero with Clear timers selected.Note: Some timers, including the life timer, may be reset during service or software upgrades.
Call log41FCC DRAFTTo activate the call timer on the display screen, in the standby mode, select Menu > Call log > Call timers > Show call time on display >On.To activate the call timer in the standby mode while in a call, select Details > Show call time on display > On or Off.To view the duration of dialed or received calls placed while in the home network or while roaming, select Details > Home or Roaming.■Minibrowser durationMinibrowser is a network service. See ""Network Services," p. 5" 5. If your network operator supports this feature, you can view the size or duration of sent or received data from the minibrowser.Note: The actual time invoiced for calls and services by your network operator may vary, depending on network features, rounding off for billing, taxes, and so forth.In the standby mode, select Menu > Call log > Minibrowser calls and one of the following options:Last sent browser data—View the size (KB) of the last sent browser data.Last received browser data—View the size (KB) of the last received data.All sent browser data—View the size (KB) of all sent browser data.All received browser data—View the size (KB) of all received browser data.Last browser session—View the duration time of the last browser session.All browser sessions—View the duration time of all browser sessions.Clear all browser logs > OK > Yes —Clear all browser logs.
Contacts42FCC DRAFT6. ContactsThe contacts list can hold up to 500 contacts, with multiple numbers and text notes for each contact. The amount of numbers and text entries that you can save may vary, depending on length and the total number of entries in the contacts list.Select Contacts in the main menu to access all options in the menu. To quickly find names saved in the Contacts list, scroll up or down with the four-way scroll.■Add new contactsSave a name and number1. In the standby mode, enter the phone number you wish to save.2. Select Options > Save.3. Enter the name, and select OK > Done.Save (only) a number1. In the standby mode, enter the phone number you wish to save.2. Select and hold Options. Save an entry1. In the standby mode, select Menu >Contacts > Add new.2. Enter the name, and select OK.3. Enter the phone number, and select OK > Done.Save multiple numbers and text itemsYou can save different types of phone numbers, addresses, and notes to entries in the contacts list. The first number you save for any entry is automatically set as the default, or primary number, but the default number can always be changed.1. In the standby mode, scroll down to the entry you wish to add a phone number or text item.2. Select Details > Options > Add number or Add detail.
Contacts43FCC DRAFTIf you selected Add number, select General, Mobile, Home, Work, or Fax.If you selected Add detail, select E-mail address, Web address, Street address, or Note.3. Enter the number or text for the type you have selected, and select OK.4. To change a number type (General, Mobile, Home, Work, or Fax), select Change type in the options list.You can also change which phone number is the default number for the contact entry.1. In the standby mode, scroll down to the number you wish to change, and select Details. 2. Scroll to the number you wish to set as default, and select Options > Set as default.Voice dialingYou can dial up to 25 stored numbers using voice dialing (voice tags).Before using voice tags, note that:• Voice tags are not language dependent. They are dependent on the speaker’s voice.• You must say the name exactly as you said it when you recorded it.• Voice tags are sensitive to background noise. Record voice tags and use them in a quiet environment.• Very short names are not accepted. Use long names and avoid similar names for different numbers.Note: Using voice tags may be difficult in a noisy environment or during an emergency, so you should not rely solely upon voice dialing in all circumstances.Assign a voice tag to an entryBefore you can use voice dialing, you must first assign a voice tag to the number.1. In the standby mode, scroll down to enter the contacts list.2. Highlight the contact you want to assign a voice tag, select Details > Options > Add voice tag > Start.3. Speak clearly into the microphone.
Contacts44FCC DRAFTNote: Do not select Quit unless you want to cancel the recording.The phone automatically stops recording and saves and replays the voice tag. The icon appears next to commands which have voice tags assigned.If recording is not successful, your phone displays an error message. Select Options > Add voice tag and repeat Step 3.Dial a number1. Select and hold Contacts > Go to.2. When you hear several beeps and Speak now appears, release the key.3. Pronounce the voice tag clearly into the microphone.When the phone finds the voice tag, Found: appears, and the phone automatically dials the number. If the phone does not locate a number or recognize the voice tag, No match found appears. OptionsAfter you have associated a voice tag to a contact, you can choose one of the following options:Play back1. Select Menu > Voice > Voice tags.2. Scroll to the voice tag you want to hear.3. Select Options > Playback.Change1. Select Menu > Voice > Voice tags.2. Scroll to the voice tag you want to change.3. Select Options > Change.4. Select Start. The phone repeats your voice tag, and Voice tag saved appears.Delete1. Select Menu > Voice > Voice tags.
Contacts45FCC DRAFT2. Scroll to the voice tag you want to erase.3. Select Options >Delete. Delete voice tag? appears.4. Select OK to erase the voice tag.Caller groupsYou can add contacts list entries to any of five caller groups, and then assign a unique ringing tone or graphic to that group. This enables you to identify callers from the group by their unique ringing tone or graphic.Setup a group1. In the standby mode, scroll down to display the list of entries in your contacts list.2. Scroll to a name you would like to add to a caller group, and select Details.3. Select Options > Caller groups.4. Select the caller group to which you would like to add the name. Options1. In the standby mode, select Menu > Contacts > Caller groups.Family, VIP, Friends, Business, and Other are the available caller groups.2. Select a group to display the following caller group options:Group name—Rename the group to your preference.Group ringing tone—Set the ringing tone for the group.Group logo—Turn the graphic for the caller group on or off.Group members—Add or remove members from the caller group.Set up 1-touch dialingYou can associate any entry in the contacts list with a key from 2–9; then dial those entries by pressing and holding the assigned key.Assign a key to 1-touch dialing1. In the standby mode, select Menu > Contacts > 1-touch dialing.2. Scroll to any (empty) slot, and select Assign.
Contacts46FCC DRAFT3. Enter the number (including the area code), and select OK; or select Search to retrieve a number from the contacts list.4. Enter a name for the number, and select OK. If 1-touch dialing is off, the phone displays a prompt asking if you would like to turn 1-touch dialing on.5. Select Yes to activate 1-touch dialing. Change 1-touch dialing numbers1. In the standby mode, select Menu > Contacts > 1-touch dialing.2. Scroll to the 1-touch dialing entry you wish to change, and select Options > Change.3. Enter the new number; or select Search to retrieve a number from the contacts list, and select OK.4. Enter a name for the entry, and select OK. Delete 1-touch dialing numbers1. In the standby mode, select Menu > Contacts > 1-touch dialing.2. Scroll to the 1-touch dialing location you wish to delete, and select Options > Delete.3. Select OK to delete the key assignment.■Edit contacts list entries1. In the standby mode, scroll down to the contact entry you would like to edit, and select Details.2. Scroll to the phone number, e-mail address, web address, postal address, or note you wish to edit, and select Options.Depending upon the contact entry you are editing, you may select from the following options:Add voice tag—Add a voice tag to the contact.Edit number—Edit an existing phone number of the contact.Delete number—Delete a phone number from the contact.Use number—Displays the phone number on the screen, ready to be called.
Contacts47FCC DRAFTView—View the details of the contact entry.Change type—Change the number type to General, Mobile, Home, Work, or Fax or the detail type to E-mail address, Web address, Street address, or Note.Set as default—Change the default number of the contact.Add number—Add a number to the contact.Add detail—Add an address or note to the contact.Add image—Add an image from the gallery to the contact.Caller groups—Add the contact to an existing caller group.Custom tone—Add a custom ring tone to the contact.Send bus. card—Send the contact via text message to another phone.Send message—Create and send the contact a message.1-touch dialing—Add the contact to your 1-touch dialing list.Edit name—Edit the name of the contact.View name—View the name of the contact.Delete—Delete the entire contact entry from your contacts list.Edit detail—Allows you to edit e-mail address, web address, postal address, or note.Delete detail—Deletes e-mail address, web address, postal address, or note.Open—Launches the Minibrowser to the highlighted web address.3. Edit the option to your preference, and select OK.■Delete contacts list entries1. In the standby mode, select Menu > Contacts > Delete.2. To delete individual entries, select One by one. 3. Scroll to the entry you wish to delete, select Delete > OK to confirm.4. To delete the entire contents of your contacts list, select Delete all.5. Select OK to confirm.6. Enter the security code and select OK. (See "Security settings," p. 65 for more information.)
Contacts48FCC DRAFT■View ContactsIn the standby mode, select Menu > Contacts and one of the following options:Search—Find a name or select from a list.Add new—Add a contact to your contacts list.Edit name—Edit an existing name.Delete—Delete a name and its associated numbers.Add number—Add a number to an existing name.Settings—Change the contacts list view or check the memory status of your phone.1-touch dialing—View or modify the list of 1-touch dialing numbers.Voice tags—Attach, listen to, or modify a voice tag to a contact in thecontacts list.My number—View your own phone number.Caller groups—View and edit the properties for any of the caller groups, including Family, VIP, Friends, Business, or Other.Search for a name1. In the standby mode, scroll down to display the contents of your contacts list.2. Press the key which corresponds to the first letter of the name for which you are performing a search. Press the key as many times as necessary until the desired letter appears.3. Scroll up or down to select a contact, and select Details to view the details.Configure settingsYou can select how the contacts appear in your contacts list and view the amount of memory used or available in your phone.1. In the standby mode, select Menu > Contacts >Settings. 2. Select one of the following options:Scrolling view—Select Name list, Name and number, or Name and image view.Memory status—View the amount of phone memory used as well as the amount of phone memory available
Contacts49FCC DRAFTNote: For more information on used and available memory, see "Shared memory," p. 6.■Send and receive contacts (business cards)If supported by your wireless provider, you can send and receive a business card as a text message to a compatible phone or other handheld device.Send a business card1. Highlight the entry from the contacts list that you wish to send and select Details > Options > Send bus. card > Via text message.2. Select Primary number or All details (if more than one number or detail exists for the contact entry).3. Enter the number for your recipient, or select Search to retrieve a number from your contacts list.4. select OK and the business card is sent.
Gallery50FCC DRAFT7. GalleryYou can save pictures and ringing tones to folders in the gallery, or create folders of your own and save them there. You can also download images and tones using web sites.Note: Only devices that offer compatible multimedia message or e-mail features can receive and display multimedia messages.■Open the galleryIn the standby mode, select Menu > Gallery. The following submenus are displayed:View folders—Explore the folders in the gallery menu. See View folders in the following section for more info.Add folder—Add a folder of your own.Delete folder—Delete a folder you have created.Rename folder—Rename a folder you have created.■View folders1. In the standby mode, select Menu > Gallery > View folders > Images, Graphics, Clip-arts, Tones or Recordings > Open.2. Scroll through the list of images, graphics, clip-arts, tones or recordings, select Options > Open, Delete, Send, Edit image, Move, Rename, Set as wallpaper or Set as ring tone, Details, Sort, or Open in sequence.
Media51FCC DRAFT8. Media■RadioYour phone has an FM radio that also functions as an alarm clock radio. To listen to the FM radio on your phone, connect a headset to the connector on the top of the phone. The FM radio uses the wire of the headset as an antenna. A compatible headset needs to be attached to the device for the FM radio to function properly.The quality of a radio broadcast depends on coverage of the radio station in that particular area.Warning: Listen to music at a moderate level. Continuous exposure to high volume may damage your hearing.Turn the radio on and off1. Connect the phone to a compatible headset or music stand.2. From the start screen, select Menu > Media > Radio. 3. To turn off the radio, press and hold the end key.Use the radioWith the radio on, select Options and one of the following options:Turn off—Turn off the radio.Save channel—Save the current station to one of 20 locations.Automatic tuning—Use the scroll key up or down to start the channel search. Select OK when a channel is found.Manual tuning—Press the scroll key up or down to search in increments of 0.1 MHz.Set frequency—Manually enter the frequency of a known radio station.Delete channel—Delete a saved channel.Rename—Rename a saved channel, and select OK.Loudspeaker or Headset—Listen to the radio through the speakerphone or through the headset.To set the radio frequency, press * and use the keypad to enter the frequency of a known radio station. To tune the radio manually, press #; then press the scroll key up or down to search in increments of 0.1 MHz.
Media52FCC DRAFTTo adjust the radio volume, press the upper volume key to increase or lower volume key to decrease the volume.When an application that uses a browser connection sends or receives data, it may interfere with the radio. When you place or receive a call, the radio automatically mutes. Once the call is ended, the radio switches back on.Save a radio channelYou can save a preset station to any one of 20 locations in memory, and then tune to that station with the 4-way scroll key.1. With the radio on, press and hold the scroll key up or down to start the channel search. Searching stops when a channel is found.2. To save the channel, select Options > Save channel.3. Enter a name for the channel, and select OK. 4. Select an (empty) location to save the channel.While the radio is playing, you can quickly save an FM station to 1–9 memory locations.1. Press and hold the corresponding number key while the radio is playing.2. Enter the name of the channel, and select OK.■Voice recorderThis feature allows you to record pieces of speech or sound with your device and listen to them later. The total available time is 3 minutes if no memos have been stored. The maximum length of a recording depends on how much memory is available.From the start screen, select Menu > Media > Voice recorder > Record to start the recording. Select Recordings list to manage the folders you have defined for recording storage. You can save recordings to the Recordings folder or to another folder in the Gallery menu.Record speech or sound1. In the standby mode, select Menu > Media > Voice recorder > Record.2. After the recorder start tone is heard, begin recording speech or sound.3. When you are finished recording, select Stop and your recording is saved to the Recordings folder in the Gallery menu.
Media53FCC DRAFT4. Select Recordings list, open the Recordings folder in the Gallery and scroll to the recording you created.OptionsAfter you have saved the recording to the Recordings folder, select Recordings list, open the Recordings folder in the Gallery, and scroll to the recording you created. Select using the earpiece or Options and the following options:Open or Play—Listen to the recording. Delete—Erase the recording.Rename—Change the name of the recording.Details—Show the name, size, date of creation, length, format, and copyright of the selected recording.Sort—Sort the contents of the selected folder by name, date, format, or size.
Settings54FCC DRAFT9. SettingsUse this menu to set or change your profiles, personal shortcuts, call settings, phone settings, time and date settings, display settings, tone settings, voice commands, enhancement settings, security settings, network, network services, and to restore the factory settings.■ProfilesProfiles define how your phone reacts when you receive a call or message, how your keypad sounds when you press a key, and more. You can choose from one of the prenamed profiles, or customize profiles of your own. The following profiles are available: Normal, Silent, Meeting, Outdoor, My profile1, and My profile 2. Ringing options, keypad tones, and other settings for each of the available profiles can be left at their default setting, or customized to suit your needs. Profiles are also available for enhancements such as a headset and car kit. See "Enhancement settings," p. 65 for more information about enhancement profiles.Activate a profile1. In the standby mode, select Menu > Settings > Profiles.2. Select the profile of your choice.3. Select Activate.Customize a profileYou can persomalize any of the profiles a variety of ways.1. In the standby mode, select Menu > Settings > Profiles.2. Select the profile you wish to customize.3. Select Customize.4. Select the option you want to personalize (Incoming call alert, Ringing tone, Ringing volume, Vibrating alert, Light alert, Message alert tone, Keypad tones, Warning tones, or Alert for ).Note: You cannot rename the Normal profile.
Settings55FCC DRAFTSet a timed profileTimed profiles can be used to prevent missed calls. For example, suppose you attend an event that requires your phone be set to Silent before the event starts, but you forget to return it to Normal until long after the event. A timed profile can prevent missed calls by returning your phone to the default profile at a time you specify.Note: Timed profiles can be set up to 24 hours in advance.1. In the standby mode, select Menu > Settings > Profiles.2. Select the profile you wish to activate and set for timed expiration.3. Select Timed.4. Enter the time for the profile to expire, and select OK. ■Personal shortcutsThe personal shortcuts menu allows you to change the function of the right selection key on your phone so that your most frequently used functions can be quickly accessed from the Go to menu while in standby mode. Choose ’Go to’ functions1. In the standby mode, select Menu > Settings > Personal shortcuts > Select 'Go to' options.2. Scroll up and down to highlight the desired functions from the list of available functions.3. Select Mark to add a function. Use Unmark to remove a function.4. Select Done when you have added all desired functions.5. Select Yes to save the changes.6. In the standby mode, select Go to to display a list of the functions that you selected in step 3.Organize functions1. In the standby mode, select Menu > Settings > Personal shortcuts > Organize 'Go to' options.
Settings56FCC DRAFT2. Scroll up and down to highlight the function you wish to rearrange, and select Move.3. Select Move up, Move down, Move to top, or Move to bottom.4. Select Done > Yes to save the changes.■Call settingsAnykey answerAnykey answer allows you to answer an incoming call by briefly pressing any key except the right selection, or end key.In the standby mode, select Menu > Settings > Call settings > Anykey answer > On or Off.Preferred carrierPreferred carrier chooses a preferred long distance carrier. In the standby mode, select Menu > Settings > Call > Preferred carrier > On or Off.With this feature enabled, you must enter the 2-digit carrier code.Automatic redialOccasionally, your network may experience heavy traffic, resulting in a fast busy signal when you dial. With automatic redial activated, your phone redials the number (number of redials depends on your wireless service provider), and notifies you once the network is available.In the standby mode, select Menu > Settings > Call settings > Automatic redial > On or Off.1-touch dialingYou can activate or deactivate 1-touch dialing. For more information, see"Set up 1-touch dialing," p. 45.Calling cardIf you use a calling card for long distance calls, you can save the calling card numbers in your phone. Your phone can store up to four calling cards.
Settings57FCC DRAFTSave information1. In the standby mode, select Menu > Settings > Call settings > Calling card.2. Enter your security code, and select OK. (See "Security settings," p. 65 for more information.)3. Scroll to one of the four memory locations, and select Options > Edit > OK > Dialing sequence.4. Select one of the following sequence types:Access no.+ phone no.+ card no.—Dial 1-800 access number, phone number, then card number (+ PIN if required)Access no.+ card no.+ phone no.—Dial 1-800 access number, card number (+ PIN if required), then phone numberPrefix+ phone no.+ card no.—Dial the prefix (numbers that must precede the phone number) and phone number you want to dial, then card number (+ PIN if required)5. Enter the required information (access number or prefix and card number), and select OK to confirm your entries.6. Select Card name.7. Enter the card name, and select OK.Note: Contact your calling card company for more information.Make callsAfter you have saved your calling card information in your phone, you can make a call using your calling card.1. In the standby mode, select Menu > Settings > Call settings > Calling card. 2. Enter your security code, and select OK. (See "Security settings," p. 65 for more information.)3. Scroll to the calling card of your choice, select Options > Select > OK.4. Press the end key to return to standby mode; then enter the phone number, including any prefix (such as 0 or 1) that your calling card may require when you make a calling card call.See your calling card for instructions.
Settings58FCC DRAFT5. Press and hold the call key for a few seconds until Card call is displayed.6. When you hear the tone or system message, select OK.International prefixYou can store an international dialing prefix into your phone. When you enter "+" at the beginning of a phone number, your phone automatically inserts the international dialing prefix that you have stored.Note: Entering the international dialing prefix with the "+" is a network service. Check with your service provider for availability.1. In the standby mode, select Menu > Settings > Call settings > International prefix.2. Enter the international dialing prefix (for example, 0011) and select OK.3. In the standby mode, press the */+ key twice to use "+" to enter the phone number you wish to call. (For example, +3546789.)The phone dials the international dialing prefix you have stored in your phone and the phone number you have entered. (For example, the phone dials 0011354789.)Call summaryYou can view the time spent on a call when you hang up.In the standby mode, select Menu > Settings > Call settings > Call summary > On or Off.■Phone settingsLanguage settings1. In the standby mode, select Menu > Settings > Phone settings > Language settings > Phone language or Writing language.Phone language—Changes the display language on your phone.Writing language—Changes the language of the text editor.2. Select the language of your choice.
Settings59FCC DRAFTThe Phone language setting affects the time and date formats of the clock, alarm clock, and calendar.Automatic keyguardYou can set the keypad of your phone to lock automatically after a preset time delay (from 10 seconds to 60 minutes).1. In the standby mode, select Menu > Settings > Phone settings > Automatic keyguard > On or Off. 2. If you selected On, Set delay: appears in the display. 3. Enter the delay (in mm:ss format), and select OK.Important: When keyguard is on, it may be possible to dial the emergency number programmed into your phone. Key in the emergency number and press the call key. The number is displayed only after you have keyed in its last digit.Touch tonesTouch tones, are the tones that sound when you press the keys on your device keypad. You can use touch tones for many automated dial-up services such as banking and airlines or for entering your voice mailbox number and password. Touch tones are sent during an active call. You can send them manually from your device keypad, or send them automatically by saving them in your device.Set typeIn the standby mode, select Menu > Settings > Phone settings > Touch tones > Manual touch tones and one of the following options:Continuous—Used to set the tone sound for as long as you press and hold a key.Fixed—Used to send tones of the duration you specify in the Touch tone length option.Off—Used to turn off tones. No tones are sent when you press a key.Set length You can specify touch-tone length for the Fixed option. In the standby mode, select Menu > Settings > Phone settings > Touch tones > Touch tone length > Short (95 ms) or Long (350 ms).
Settings60FCC DRAFTStart-up toneYou can set your phone to play (or not to play) a start-up tone when the phone is powered on.In the standby mode, select Menu > Settings > Phone settings > Start-up tone > On or Off.Welcome noteYou can write a welcome note which briefly appears on the display screen whenever you switch your phone on.Note: Dictionary mode is not available for entering welcome note text.1. In the standby mode, select Menu > Settings > Phone settings > Welcome note.2. Enter a note (up to 44 characters). Press * to display and select from available special characters.3. When you are finished, select Options > Save. Select Options > Delete to delete the previous text and begin creating another welcome note.Choose a bannerBanner is a carrier-dependent feature. If your network operator supports this feature, you can choose whether the display shows the operator logo when the phone is in the idle state. In the standby mode, select Menu > Settings > Phone settings > Banner > Default or Customize.Help text activationYour phone displays brief descriptions for most menu items. When you arrive at a feature or menu, pause for about 15 seconds and wait for the help text to display. Use the scroll keys to page through the full help text, if necessary.The default setting for Help text is on. However, you can turn help text on or off by doing the following.In the standby mode, select Menu >Settings > Phone settings > Help text activation > On or Off.
Settings61FCC DRAFT■Voice commandsYou can set as many as 10 voice commands, which allow hands-free operation of certain phone features. Add a voice commandBefore using voice commands, you must first add a voice tag to the phone function. 1. In the standby mode, select Menu > Voice > Voice commands.2. Select the phone function you wish to tag (Profiles, Voice mailboxRadio, Radio, Voice recorder, or Call log).3. If necessary, select an option associated with that function.4. Select Options > Add command.5. Select Start, and speak the voice tag clearly into the microphone.Note: Do not select Quit unless you want to cancel the recording.The phone replays and then saves the recorded tag. The icon appears next to commands which have voice tags assigned.Activate a voice commandAfter you have associated a voice tag with a phone function, you can issue a command by speaking the voice tag.1. Select and hold ContactsGo to.2. When Speak now appears, pronounce the voice tag clearly into the microphone. When the phone finds the voice tag, Found: appears, and the phone plays the recognized voice tag through the earpiece. The function you requested is activated.OptionsAfter you have associated a voice tag to a command, you can choose one of the following options:• Select Playback to listen to the voice command.• Select Change to change the voice command.
Settings62FCC DRAFT• Select Delete to erase the voice command.■Time and date settingsTimeShow/hide the clockIn the standby mode, select Menu > Settings > Time and date settings > Clock > Show clock or Hide clock.Set the time1. In the standby mode, select Menu > Settings > Time and date settings > Clock > Set the time.2. Enter the time (in hh:mm format), and select OK.3. Select am or pm if 12-hour format is used.Change the formatIn the standby mode, select Menu > Settings > Time and date settings > Clock > Time format > 24-hour or 12-hour. DateShow/hide the dateIn the standby mode, select Menu > Settings > Time and date settings > Date > Show date or Hide date.Set the date1. In the standby mode, select Menu > Settings > Time and date settings > Date > Set the date.2. Enter the date, and select OK.Change the date format1. In the standby mode, select Menu > Settings > Time and date settings > Date.2. Select Date separator.3. Select a separator of your choice. 4. Select Date format. 5. Select the format of your choice.
Settings63FCC DRAFTSet the auto-update of date & timeAuto-update is a network service. See "Network Services," p. 5 for more information.If your wireless service provider supports this feature, you can allow the digital network to set the clock, which is useful when you are out of your home area, for instance when you have traveled to another network or time zone.In the standby mode, select Menu > Settings > Time and date settings > Auto-update of date & time > On, Confirm first, or Off.If you use the Auto-update of date & time option while outside your digital network, you may be prompted to enter the time manually. Network time will replace the time and date when you re-enter your digital network.If your battery has been removed or has drained outside the digital network, you may be prompted to enter the time manually (once the battery is replaced/recharged, and you are still outside of the digital network). ■Display settingsWallpaperYou can set your phone to display a background picture (wallpaper) while in standby mode. 1. In the standby mode, select Menu > Settings > Display settings > Wallpaper > Select wallpaper. 2. Browse the folders in the gallery, highlight a folder, and select Open.3. Highlight the image of your choice, select Options > Set as wallpaper.To activate or deactivate wallpaper, in the standby mode, select Menu > Settings > Display settings > Wallpaper > On or Off.Color schemesYou can change the color of some display components in your phone, such as indicators and signal bars.In the standby mode, select Menu > Settings > Display settings > Color schemes and color scheme of your choice.
Settings64FCC DRAFTScreen saverIf you have turned the screen saver on, then the screen saver is activated when no function of the phone is used after a preset period of time. Press any key to deactivate the screen saver. In the standby mode, select Menu > Settings > Display settings > Screen saver. and one of the following options:On—Activate the screen saver.Off—Deactivate the screen saver.Select s. saver—Choose a screen saver from the Graphics folder in the Gallery menu.Time-out—Set your phone to display a screen saver after a preset time or after a custom time (up to 60 minutes) of your choosing.Menu viewYou can choose whether the menu items in your phone appear as a list or as a 3x3 grid. (Grid is the default selection in your phone.) For more information, see "User interface features," p. 11.In the standby mode, select Menu > Settings > Display settings > Menu view > List or Grid.Display brightnessYou can change the brightness of your phone display.1. In the standby mode, select Menu > Settings > Display settings > Display brightness.2. Scroll left and right to adjust the contrast level to your preference, and select OK to accept your settings.Backlight time-outThe light on the screen (backlight) times out after 15 seconds of no activity. However, you can personalize the backlight to time out for up to 5 minutes.In the standby mode, select Menu > Settings > Display settings > Backlight time-out > Always off, 7 seconds, 15 seconds, or 30 seconds.
Settings65FCC DRAFT■Tone settingsFrom this menu, you can adjust the ringing volume, keypad tones, and other tone settings for the currently active profile. See "Customize a profile," p. 54 for more information on profile settings.■Enhancement settingsThe Enhancement settings menu is shown only if the phone is or has been connected to a compatible enhancement.In the standby mode, select Menu > Settings > Enhancement settings > Headset or Charger.Note: This phone does not support Text phone.HeadsetSelect an option to enter the submenu and modify its settings. Default profile—Choose the profile you wish to be automatically activated when a headset is connectedAutomatic answer—Calls are answered automatically after one ring when a headset is connected. Select On or Off.ChargerSelect an option to enter the submenu and modify its settings. Default profile—Choose the profile you wish to be automatically activated when a charger is connectedLights—Choose to keep the phone lights always on, or to shut off automatically after several seconds. Select On or Automatic.■Security settingsSecurity settingsWhen first accessing the security settings, enter the preset lock code, by default, the last four digits of your phone number. Depending on your wireless service provider, the preset lock code can be a four digit number such as 1234 or 0000. If none of these work, contact your wireless service provider for help.
Settings66FCC DRAFTPhone lockThe phone lock feature protects your device from unauthorized outgoing calls or unauthorized access to information stored in the device. With phone lock activated, Phone locked is displayed each time you turn your device on or off.With the device locked, calls may still be possible to the official emergency number programmed into your device.1. In the standby mode, select Menu > Settings > Security.2. Enter the lock code, and select OK. See ""Change lock code," p. 66" 66.3. Select Phone lock and one of the following options:Off—Immediately turns off the device lock feature.Lock now—Immediately turns on the device lock feature.On power-up—Turns on the device lock feature the next time you turn the device on.With Lock now selected, you must enter your lock code before the device can function normally. With the lock code accepted, your device functions normally.Call not allowed is displayed if you attempt to place a call with your device locked. To answer a call with phone lock on, select Answer, or press the call key.Allow numbersWith phone lock on, the only outgoing calls you can make are to the emergency number programmed into your device (for example, 911) or the number stored in the Allowed no. when phone locked location:1. In the standby mode, select Menu > Settings > Security.2. Enter the lock code, and select OK. See ""Change lock code," p. 66" 66.3. Select Allowed no. when phone locked. With an empty folder selected, select Assign, and enter the phone number; or select Assign > Find to recall the number from your contacts list. Select OK.To call the allowed phone number, in the standby mode, scroll down to highlight the number you want to call, or enter it on the keypad; press the call key to place the call.Change lock codeThe preset lock code, by default, is the last four digits of your phone number. Depending on your wireless service provider, the preset lock code can be a four
Settings67FCC DRAFTdigit number such as 1234 or 0000. If none of these work, contact your wireless service provider for help.To ensure the security of your device, you may want to change the preset lock code to your own selected four digit number. Avoid using codes similar to emergency numbers such as 911 to prevent accidental dialing of the emergency number.If you enter an incorrect lock code five times in a row, your device may ask you for the security code. By default, the security code is 12345, a five digit number.Note: With the wrong lock code entered five times in succession, your phone will not accept your correct lock code for 5 minutes, even if you power off the device between incorrect entries.1. In the standby mode, select Menu > Settings > Security.2. Enter the lock code, and select OK.3. Select Change lock code.4. Enter the new lock code (must be 4 characters in length).5. Reenter the new lock code for verification, and select OK.When changing your lock code, make sure you store it in a safe place, away from your device. Avoid entering access codes similar to emergency numbers to prevent accidental emergency calls.Call restrictionsSelect call restrictions to block or allow numbers for incoming and outgoing calls. With any numbers entered as allowed numbers, all those entered as blocked numbers are ignored. With a number blocked, the phone blocks any call from it, and send the caller to the voice mail.1. In the standby mode, select Menu > Settings > Security.2. Enter the lock code, and select OK. See ""Change lock code," p. 66" 66.3. Select Call restrictions. 4. Select the types of calls you want to restrict:Restrict outgoing calls—Set restrictions on making calls.Restrict incoming calls—Set restrictions on receiving calls.5. Select whether to block or allow numbers:Blocked numbers—Set the numbers the phone can only block, allowing all the rest.
Settings68FCC DRAFTAllowed numbers—Set the numbers the phone can only call or receive, blocking all the rest. 6. Select one of these options: Select, Add restriction (unavailable with memory full), Edit (unavailable with no number added), or Delete (unavailable with no number added).Note: With restricted calls, you may still call the official emergency number programmed into your device.■NetworkThe following features are network services. See "Network Services," p. 5 for more information. The menu options you see in your phone are based on your service provider’s network. The network determines which options actually appear in the phone menu. Check with your service provider for more information.The Network menu allows you to customize the way your phone chooses a network in which to operate while you are within or outside of your primary or home system. Your phone is set to search for the most cost-effective network. If your phone cannot find a preferred network, it selects a network automatically based on the option you choose in the Network menu.In the standby mode, select Menu > Settings > Network and one of the following options:Home only—You can make and receive calls in your home are only. While roaming, No network coverage appears and you cannot make or receive calls.Automatic—The phone automatically roams to another digital network. The roaming rate applies when not in the home service area.■Network servicesThe following features are network services. See ""Network Services," p. 5".Store a feature code1. In the standby mode, select Menu > Settings > Network services > Network feature setting. 2. Enter the feature code from your service provider (for example, *633), and select OK.
Settings69FCC DRAFT3. Select the type of service that matches the feature code you entered (for example, Call forwarding).The activated feature code is now stored in your device, and you are returned to the Feature code: field. Continue entering other feature codes (for example, *633), or press the end key to return to the standby mode. When you enter a network feature code successfully, the feature becomes visible in the Network services menu. Call forwardingCall forwarding tells your network to redirect incoming calls to another number. Call forwarding is a network service and may not work the same in all networks, so contact your wireless service provider for availability.ActivateThe following options may not all appear in the display. Contact your wireless service provider for more information.1. In the standby mode, select Menu > Settings > Network services > Call forwarding and one of the following options:Forward all calls—Divert all calls to the number you specify.Forward if busy—Divert incoming calls when you are in a call.Forward if not answered—Divert incoming calls to another number if you are unable to answer. You can set a delay before diverting takes place.Forward if out of reach—Divert incoming calls when your device is off.2. Select Activate.3. Enter the number to which to divert your calls, and select OK.CancelIn the standby mode, select Menu > Settings > Network services > Call forwarding > Cancel all diverts. Cancel all diverts may affect your ability to receive voice mail messages. Contact your wireless service provider for specific details.
Settings70FCC DRAFTCall waitingIf your wireless service provider supports this feature, call waiting notifies you of an incoming call even while you are in a call. You can then accept, reject, or ignore the incoming call.1. In the standby mode, select Menu > Settings > Network services > Call waiting > Activate or Cancel.2. During a call, select Answer, or press the call key or voice key to answer the waiting call. The first call is put on hold.3. Press the end key to end the active call.Send my caller IDIf your wireless service provider supports this feature, then you can prevent your number from appearing on the receiving party’s caller ID.In the standby mode, select Menu > Settings > Network services > Send my caller ID >Yes or NoView your phone numberIn the standby mode, select Menu > Settings > Network services > Own number selection.■Restore factory settingsYou can reset some of the menu settings to their original values. Data that you have entered or downloaded is not deleted, for example, entries in your contacts list are not affected.1. In the standby mode, select Menu > Settings > Restore factory settings.2. Enter the security code, and select OK. (See "Security settings," p. 65 for more information.)
Organizer71FCC DRAFT10. OrganizerYour phone contains features to help organize your everyday life, including an alarm clock, calendar, to-do list, calculator, countdown timer, stopwatch, and calorie calculator.■Alarm clockSet an alarmThe alarm clock is based on the phone clock. It sounds an alert any time you specify and even works if the phone is turned off. If you have not set the time on your phone clock, you will be prompted to do so before setting an alarm.1. In the standby mode, select Menu > Organizer > Alarm clock > Alarm time.2. Enter the time for the alarm in hh:mm format, and select OK. 3. Select am or pm (if using 12-hour format).Alarm on appears briefly in the display and appears while in standby mode.Change the time1. In the standby mode, select Menu > Organizer > Alarm clock > Alarm time > On. 2. Enter the time for the alarm in hh:mm format, and select OK. 3. Select am or pm (if using 12-hour format).Alarm on appears briefly in the display and appears while in standby mode.
Organizer72FCC DRAFTSet the alarm toneYou can set which tone is played when the alarm sounds.1. In the standby mode, select Menu > Organizer > Alarm clock > Alarm tone.2. Select Standard, Radio, Ringing tone, or Open Gallery to choose the tone of your choice.Note: Connect a headset to the phone when using the radio for an alarm tone.Repeat an alarmYou can set the alarm to repeat every day or only on certain days of the week.1. In the standby mode, select Menu > Organizer > Alarm clock > Repeat alarm > On.2. Highlight the day (or days) of the week you wish to repeat the alarm and select Mark. (Use Unmark to remove a day.)3. Select Done when you have added all desired days.Alarm conditionsWhen the alarm sounds, your phone beeps and the display lights up.With the phone on, select Stop to shut the alarm off, or select Snooze. The alarm stops for 10 minutes and Snooze on appears in the display. Select Stop at any time to turn the snooze off.The alarm sounds for one minute. If you do not press a key, the alarm stops (snoozes) for 10 minutes, then sounds again.If the alarm time is reached while the phone is switched off, the phone switches itself on and starts sounding the alarm tone. If you select Stop, the device asks whether you want to activate the phone for calls. Select No to switch off the device or Yes to make and receive calls. Do not select Yes when wireless phone use may cause interference or danger.Turn an alarm offIn the standby mode, select Menu > Organizer > Alarm clock > Alarm time > Off.
Organizer73FCC DRAFT■CalendarThe calendar keeps track of reminders, memos, calls you need to make, meetings, and birthdays. You can even set an alarm for any of these events.Monthly view provides an overview of the selected month and weeks. It also allows you to jump to a specific date. Any days or dates that appear in bold font contain calendar notes such as a meeting or reminder.OpenIn the standby mode, select Menu > Organizer > Calendar.Note: To open the calendar quickly, scroll right while in standby mode.You can move the cursor in some calendar views by scrolling.Go to date1. In the standby mode, select Menu > Organizer > Calendar > Options > Go to date.2. Enter the date (for example, 06/30/2005), and select OK.Make a noteYou can choose from five types of notes: Meeting, Call, Birthday, Memo, and Reminder. Your phone asks for further information depending on which note you choose. You also have the option to set an alarm for any note that you select.1. Go to the date for which you want to set a reminder. (See "Go to date," p. 73 if you need more information.)2. From the monthly view (with the date highlighted), select Options > Make a note.3. Select one of the following note types, and select Options > Save:Meeting—Enter a subject, location, and a start and end time. Choose an alarm option.Call—Enter a phone number, a name, and the time. Choose an alarm option.Birthday—Enter the person’s name, and year of birth. Choose an alarm option.
Organizer74FCC DRAFTMemo—Enter a subject, a start date, and an end date. Choose an alarm option.Reminder—Enter the subject you wish to be reminded about. Choose an alarm option.View notes (day view)After you have created some calendar notes, you can view them as follows:1. In the standby mode, select Menu > Organizer > Calendar.2. Scroll to the date containing the note. Any days containing notes will be in bold font.3. Select Options > Day notes. 4. To view more details of a highlighted note, select Options > View.Options while viewing a list of notesSelect Options while viewing a day’s notes to access the following options:The options listed below are available either while viewing the body of a note or viewing the header of a note. View—View the full details of the note.Make a note—Create a new note for the selected date.Delete—Delete the note.Edit—Edit the note.Move—Move the note to another date on your calendar.Repeat—Enable the note to recur on a regular basis (daily, weekly,biweekly, monthly, or yearly).Go to date—Jump to another date on your calendar.Send note—Send the note to another device using text message or in vCal format.Copy—Copy the note. You can then paste the note to another date.Settings—Set the date and time, date and time formats, the day each week starts, and whether you want your notes to auto-delete after a specified time.Go to to-do list—Takes you to the to-do list for the selected date.
Organizer75FCC DRAFTSend a calendar note1. In the standby mode, select Menu > Organizer > Calendar.2. Scroll to the date containing the note you wish to send. Any days containing notes will be in bold font.3. Select Options > Day notes.4. Scroll to the note you wish to send, and select Options > Send note > Via calendar or Via text message.5. If you selected Via calendar, enter the recipient’s phone number or e-mail address, and select OK; or select Search to retrieve a number from your contacts list, and select Send. The note is sent.6. If you selected Via text message, the note appears in the display as a text message. Select Options > Send to > Send to number, Send to e-mail, Send to many, or Send to distrib. list.Send to distrib. list is available only if there are distribution lists programmed in the phone.Enter the recipient’s phone number or e-mail address, and select OK; or select Search to retrieve a number from your contacts list, and select Send. The note is sent.Receive a calendar noteWhen you receive a calendar note, your phone displays Calendar note received. You can then save the note in your Calendar and set an alarm for a date and time.View notes1. When your phone displays Calendar note received, select Show.2. Scroll to view the entire message, if necessary.Save notesAfter viewing the calendar note, select Options > Save.Discard notesAfter viewing the calendar note, select Options > Discard.
Organizer76FCC DRAFT■To-do listYou can keep track of your tasks with the To-do list feature. The number of notes you can save depends on their length and the unused memory of the phone. To-do notes are not related to specific dates.Add a To-do note1. In the standby mode, select Menu > Organizer > To-do list > Options > Add.If this is your first time to use the to-do list, Add is highlighted.2. Enter your to-do note, and select Options > Save > High, Medium, or Low priority. Options while viewing To-do notesSelect Options while viewing the header or body of a note, and select an option to activate it or enter its submenu.■CalculatorUse calculatorThe calculator in your phone adds, subtracts, multiplies, divides, calculates the square and the square root, and converts currency values.Note: This calculator has a limited accuracy and is designed for simple calculations.1. In the standby mode, select Menu > Organizer > Calculator.2. Enter the first number in the calculation.Press # for a decimal point if necessary.To perform a square or square root calculation, select Options > Square or Square root. 3. Press * to cycle through the add (+), subtract (-), multiply (*), and divide (/) characters. Pause briefly to select the displayed character.4. Enter the second number in your calculation.5. Select Options > Equals.
Organizer77FCC DRAFTUse currency converterYou can convert foreign currency to domestic or vice versa.1. In the standby mode, enter a currency amount to convert.2. Select Options > In domestic or In foreign.In domestic—converts foreign currency to domestic currency.In foreign—converts domestic currency to foreign currency.If you have not done so already, you are prompted to enter the exchange rate.3. Enter the exchange rate (press # to insert a decimal), and select OK.Change exchange rateAt any time, you can edit the exchange rate used by the currency converter.Note: When you change base currency, you must key in the new rates because all previously set exchange rates are set to zero.1. In the standby mode, select Menu > Organizer > Calculator > Options > Exchange rate > Foreign unit in domestic units or Domestic unit in foreign units.Foreign unit in domestic units—the number of home units it takes to make one unit of foreign currencyDomestic unit in foreign units—the number of foreign units it takes to make one unit of your home currency2. Enter the exchange rate, and select OK.■Countdown timerYou can enter a specified time (up to 99 hours, 59 minutes, and 59 seconds). When the time runs out, your phone sounds an alarm.Note: The countdown timer only works when the phone is on. Once you turn off your phone, the timer is no longer active.Set the countdown timer1. In the standby mode, select Menu > Organizer > Countdown timer.2. Enter the time (in hh:mm:ss format), and select OK.
Organizer78FCC DRAFT3. Enter a note for the timer, and select OK. The icon appears on the screen when the countdown timer is set.When the time runs out, your phone sounds an alarm, displays the timer note, and flashes its lights. • Press any key during the alarm to stop the alarm.• After 30 seconds the timer alert expires automatically.Change the timeAfter you have set the timer, you can change the time. 1. In the standby mode, select Menu > Organizer > Countdown timer > Change time.2. Enter the new time, and select OK.3. Leave the note as it was, or enter a new note, and select OK. Stop the timer before the alarm soundsAfter you have set the timer, you can stop the timer.In the standby mode, select Menu > Organizer > Countdown timer > Stop timer.■StopwatchYour phone has a stopwatch that can be used to track time. The stopwatch displays time in hours, minutes, seconds and fractions of a second in hh:mm:ss:s format.Using the stopwatch or allowing it to run in the background when using other features increases the demand on battery power and reduces the battery life.Measure split or lap timeUse the split time or lap time functions for activities where you need to pace yourself.1. In the standby mode, select Menu > Organizer > Stopwatch > Split timing or Lap timing > Start.Split timing—Use the split time function for such activities as a long distance race when you need to pace yourself. Select Split to note the lapsed time. The timer continues to run and the split time appears below the running time.
Organizer79FCC DRAFTEach time you select Split, the new measured time appears at the beginning of the list.Lap timing—Use the lap time function when you want to track how long it takes to complete each cycle or lap. Select Lap to note the lap time. The clock stops, then immediately restarts from zero. The lap time appears below the running time. Each time you select Lap, the new measured time appears at the beginning of the list.2. Select Stop to end timing and display total time.Save the time1. While the clock is running, select Stop > Options > Save. 2. Enter a name for the measurement, and select OK.If you do not enter a name, the total time is used as the default title for the time.OptionsYou can choose the following options when using the stopwatch for split timing or lap timing:Continue—Shows up when the stopwatch is working in the background.Show last—Allows you to view the last measured time.Split timing—Track a long distance race when you need to pace yourself.Lap timing—Track how long it takes to complete each cycle or lap.View times—Allows you to browse the saved times.Delete times—Allows you to delete any saved times. You can delete the saved times one by one or all at once.Operation noteIf you press the end key and return to standby mode while the stopwatch is still running, the stopwatch continues to run in the background and the icon appears in the upper left corner of the screen.To return to the stopwatch screen:1. In the standby mode, select Menu > Organizer > Stopwatch >Continue.2. To stop the clock, select Stop.
Organizer80FCC DRAFT■Calorie calculatorThe calorie calculator estimates the amount of energy used in various physical activities. The energy used depends on age, weight, and gender. You can save up to 10 activities in your phone.The calorie calculator provides general measurements for personal use that may vary from scientific measurements.Save personal data1. In the standby mode, select Menu > Organizer > Calorie counter > Settings.2. Enter Weight, Age, Gender, and if desired, change the Weight format, Calorie format, or Velocity format.3. Select OK.Select an activity1. In the standby mode, select Menu > Organizer > Calorie counter > Activities, and select Add new; or select Options > Add new.2. Select an activity.3. If prompted, select an intensity level.4. Enter the duration of the activity (in hh:mm format), and select OK.5. Select OK to save the activity.Edit and delete activities1. To edit activities, select Options while in the Activities menu.2. You can now add a new activity, edit an existing one, total the calorie amount of all selected activities, or delete an activity.3. To delete all activities at once, select Menu > Organizer > Calorie counter > Delete all > OK.
Mobile web81FCC DRAFT11. Mobile web Minibrowser is a network service. See "Network Services," p. 5.Your device has a built-in browser you can use to connect to selected services on the mobile internet. If your network operator supports this feature, then you can view weather reports, check news or flight times, view financial information, and much more. The web browser on your device can display WAP-based content.Your device may have some bookmarks loaded for sites not affiliated with Nokia. Nokia does not warrant or endorse these sites. If you choose to access them, you should take the same precautions, for security or content, as you would with any internet site.The security icon does not indicate that the data transmission between the gateway and the content server (or place where the requested resource is stored) is secure. The network operator secures the data transmission between the gateway and the content server.■Mobile Internet accessBecause mobile Internet content is designed to be viewed from your device, your network operator is now your mobile Internet service provider as well.It is likely that your network operator has created a home page and set up your browser to go to this page when you log on to the mobile Internet. At your service provider’s home page, you may find links to a number of other sites.It should not be necessary to manually configure the browser on your device. Normally this is done by your network operator after you subscribe to the feature. Contact your network operator if you have problems using the browser.■Sign onIn the standby mode, select Menu >Mobile web > Minibrowser > Connect or the operator provided menu item.After a brief pause, your device attempts to connect to your network operator’s home page. If you receive an error message, your device may not be set up for browsing. Contact your network operator to make sure that your device is configured properly.
Mobile web82FCC DRAFT■Navigate the mobile InternetSince your device screen is much smaller than a computer screen, mobile Internet content is displayed differently than you may be accustomed to seeing. This section contains guidelines for using the keys to navigate a WAP site.Phone keys• Press the power key to display the minibrowser home screen.• Scroll up or down to browse the WAP site.• Select an item.• To enter letters and numbers, press a key from 0–9.• To enter special characters, press *.Receive a call while onlineIf your data connection is not active, you may still be able to receive a voice call while using the WAP browser.• To answer the incoming call, press the call key. • To reject the incoming call, press the end key (a carrier-dependent feature). While in the voice call, you are not able to load new pages in the browser.Note: If your data connection is active, the incoming calls are automatically forwarded to voice mail, depending on your carrier.Make an emergency call while onlineYou can end your data connection and make an emergency call. 1. To close your mobile Internet connection, press the end key.2. Press the end key as many times as needed to clear the display and ready the device for calls. 3. Enter the emergency number for your present location (for example, 911). Emergency numbers vary by location.4. Press the call key.
Mobile web83FCC DRAFTClear the cache and disconnectA cache is a memory location that is used to store data temporarily. If you have tried to access or have accessed confidential information requiring passwords, empty the cache after each use. The information or services you have accessed are stored in the cache. To empty the cache while in the browser menu, select Navigate > Advanced > Clear > Cache from the home page. To clear the cache and power off your device, press and hold the power key.To close your mobile internet connection while browsing, press the end key.
Enhancements84FCC DRAFT12. EnhancementsCheck the model number of any charger before use with this device. This device is intended for use when supplied with power from ACP-12 or other compatible charger.Warning: Use only batteries, chargers and enhancements approved by Nokia for use with this particular model. The use of any other types may invalidate any approval or warranty, and may be dangerous. Your device and its enhancements may contain small parts. Keep them out of reach of small children.A few practical rules about accessories and enhancements:• Keep all accessories and enhancements out of the reach of small children.• When you disconnect the power cord of any accessory or enhancement, grasp and pull the plug, not the cord.• Check regularly that enhancements installed in a vehicle are mounted and are operating properly.• Installation of any complex car enhancements must be made by qualified personnel only.For availability of approved enhancements, please check with your dealer.Power• Standard 970 mAh Li-Ion Battery (BL-5C)• Standard Charger (ACP-7)• Travel Charger (ACP-12)• Compact Charger (AC-1)Audio• UHJ Headset (HS-9)Car• Universal Headrest Handsfree (BHF-4)• Mobile Charger LCH-12
Reference information85FCC DRAFT13. Reference informationThis section provides information about your phone batteries, enhancements, chargers, safety guidelines, and technical information. Be aware that the information in this section is subject to change as batteries, chargers, and enhancements change.■Batteries and chargersYour device is powered by a rechargeable battery. The full performance of a new battery is achieved only after two or three complete charge and discharge cycles. The battery can be charged and discharged hundreds of times, but it will eventually wear out. When the talk and standby times are noticeably shorter than normal, replace the battery. Use only Nokia approved batteries, and recharge your battery only with Nokia approved chargers designated for this device.If a replacement battery is being used for the first time or if the battery has not been used for a prolonged period, it may be necessary to connect the charger and then disconnect and reconnect it to start the charging.Unplug the charger from the electrical plug and the device when not in use. Do not leave fully charged battery connected to a charger, since overcharging may shorten its lifetime. If left unused, a fully charged battery will lose its charge over time.If the battery is completely discharged, it may take a few minutes before the charging indicator appears on the display or before any calls can be made.Use the battery only for its intended purpose. Never use any charger or battery that is damaged.Do not short-circuit the battery. Accidental short-circuiting can occur when a metallic object such as a coin, clip, or pen causes direct connection of the positive (+) and negative (-) terminals of the battery. (These look like metal strips on the battery.) This might happen, for example, when you carry a spare battery in your pocket or purse. Short-circuiting the terminals may damage the battery or the connecting object.Leaving the battery in hot or cold places, such as in a closed car in summer or winter conditions, will reduce the capacity and lifetime of the battery. Always try to keep the battery between 15°C and 25°C (59°F and 77°F). A device with a hot
Reference information86FCC DRAFTor cold battery may not work temporarily, even when the battery is fully charged. Battery performance is particularly limited in temperatures well below freezing.Do not dispose of batteries in a fire as they may explode. Batteries may also explode if damaged. Dispose of batteries according to local regulations. Please recycle when possible. Do not dispose as household waste.■Nokia battery authentication guidelinesAlways use original Nokia batteries for your safety. To check that you are getting an original Nokia battery, purchase it from an authorized Nokia dealer, look for the Nokia Original Enhancements logo on the packaging and inspect the hologram label using the following steps:Successful completion of the three steps is not a total assurance of the authenticity of the battery. If you have any reason to believe that your battery is not an authentic original Nokia battery, you should refrain from using it and take it to the nearest authorized Nokia service point or dealer for assistance. Your authorized Nokia service point or dealer will inspect the battery for authenticity. If authenticity cannot be verified, return the battery to the place of purchase. Authenticate hologram1. When looking at the hologram on the label, you should see the Nokia connecting hands symbol from one angle and the Nokia Original Enhancements logo when looking from another angle.2. When you angle the hologram left, right, down, and up, you should see 1, 2, 3, and 4 dots on each side respectively.
Reference information87FCC DRAFT3. Scratch the side of the label to reveal a 20-digit code, for example 12345678919876543210. Turn the battery so that the numbers are facing upwards. The 20-digit code reads starting from the number at the top row followed by the bottom row. Confirm that the 20-digit code is valid by following the instructions at www.nokia.com/batterycheck.What if your battery is not authentic?If you cannot confirm that your Nokia battery with the hologram on the label is an authentic Nokia battery, please do not use the battery. Take it to the nearest authorized Nokia service point or dealer for assistance. The use of a battery that is not approved by the manufacturer may be dangerous and may result in poor performance and damage to your device and its enhancements. It may also invalidate any approval or warranty applying to the device.To find out more about original Nokia batteries, visit www.nokia.com/battery.
Care and maintenance88FCC DRAFTCare and maintenanceYour device is a product of superior design and craftsmanship and should be treated with care. The suggestions below will help you protect your warranty coverage.• Keep the device dry. Precipitation, humidity and all types of liquids or moisture can contain minerals that will corrode electronic circuits. If your device does get wet, remove the battery and allow the device to dry completely before replacing it.• Do not use or store the device in dusty, dirty areas. Its moving parts and electronic components can be damaged.• Do not store the device in hot areas. High temperatures can shorten the life of electronic devices, damage batteries, and warp or melt certain plastics.• Do not store the device in cold areas. When the device returns to its normal temperature, moisture can form inside the device and damage electronic circuit boards.• Do not attempt to open the device other than as instructed in this guide.• Do not drop, knock, or shake the device. Rough handling can break internal circuit boards and fine mechanics.• Do not use harsh chemicals, cleaning solvents, or strong detergents to clean the device.• Do not paint the device. Paint can clog the moving parts and prevent proper operation.• Use a soft, clean, dry cloth to clean any lenses, such as camera, proximity sensor, and light sensor lenses.• Use only the supplied or an approved replacement antenna. Unauthorized antennas, modifications, or attachments could damage the device and may violate regulations governing radio devices.• Use chargers indoors.• Always create a backup of data you want to keep, such as contacts and calendar notes, before sending your device to a service facility.All of the above suggestions apply equally to your device, battery, charger, or any enhancement. If any device is not working properly, take it to the nearest authorized service facility for service.
Additional safety information89FCC DRAFTAdditional safety information■Operating environmentThis device meets RF exposure guidelines when used either in the normal use position against the ear or when positioned at least 1.5 cm (5/8 inches) away from the body. When a carry case, belt clip or holder is used for body-worn operation, it should not contain metal and should position the device the above-stated distance from your body.In order to transmit data files or messages, this device requires a good quality connection to the network. In some cases, transmission of data files or messages may be delayed until such a connection is available. Ensure the above separation distance instructions are followed until the transmission is completed.■Medical devicesOperation of any radio transmitting equipment, including wireless phones, may interfere with the functionality of inadequately protected medical devices. Consult a physician or the manufacturer of the medical device to determine if they are adequately shielded from external RF energy or if you have any questions. Switch off your device in health care facilities when any regulations posted in these areas instruct you to do so. Hospitals or health care facilities may be using equipment that could be sensitive to external RF energy.PacemakersPacemaker manufacturers recommend that a minimum separation of 15.3 centimeters (6 inches) be maintained between a wireless phone and a pacemaker to avoid potential interference with the pacemaker. These recommendations are consistent with the independent research by and recommendations of Wireless Technology Research. Persons with pacemakers should:• always keep the device more than 15.3 centimeters (6 inches) from the pacemaker;• not carry the device in a breast pocket; and • hold the device to the ear opposite the pacemaker to minimize the potential for interference.If you suspect interference, switch off your device and move the device away.
Additional safety information90FCC DRAFTHearing aidsSome digital wireless devices may interfere with some hearing aids. If interference occurs, consult your service provider.■VehiclesRF signals may affect improperly installed or inadequately shielded electronic systems in motor vehicles such as electronic fuel injection systems, electronic antiskid (antilock) braking systems, electronic speed control systems, air bag systems. For more information, check with the manufacturer or its representative of your vehicle or any equipment that has been added.Only qualified personnel should service the device, or install the device in a vehicle. Faulty installation or service may be dangerous and may invalidate any warranty that may apply to the device. Check regularly that all wireless device equipment in your vehicle is mounted and operating properly. Do not store or carry flammable liquids, gases, or explosive materials in the same compartment as the device, its parts, or enhancements. For vehicles equipped with an air bag, remember that air bags inflate with great force. Do not place objects, including installed or portable wireless equipment in the area over the air bag or in the air bag deployment area. If in-vehicle wireless equipment is improperly installed and the air bag inflates, serious injury could result.Using your device while flying in aircraft is prohibited. Switch off your device before boarding an aircraft. The use of wireless teledevices in an aircraft may be dangerous to the operation of the aircraft, disrupt the wireless telephone network, and may be illegal.■Potentially explosive environmentsSwitch off your device when in any area with a potentially explosive atmosphere and obey all signs and instructions. Potentially explosive atmospheres include areas where you would normally be advised to turn off your vehicle engine. Sparks in such areas could cause an explosion or fire resulting in bodily injury or even death. Switch off the device at refuelling points such as near gas pumps at service stations. Observe restrictions on the use of radio equipment in fuel depots, storage, and distribution areas, chemical plants or where blasting operations are in progress. Areas with a potentially explosive atmosphere are often but not always clearly marked. They include below deck on boats, chemical transfer or storage facilities, vehicles using liquefied petroleum gas (such as propane or butane), and areas where the air contains chemicals or particles such as grain, dust, or metal powders.
Additional safety information91FCC DRAFT■Emergency callsImportant: Wireless phones, including this phone, operate using radio signals, wireless networks, landline networks, and user-programmed functions. Because of this, connections in all conditions cannot be guaranteed. You should never rely solely on any wireless phone for essential communications like medical emergencies.To make an emergency call: 1. If the phone is not on, switch it on. Check for adequate signal strength. 2. Press the end key as many times as needed to clear the display and ready the phone for calls. 3. Enter the official emergency number for your present location. Emergency numbers vary by location. 4. Press the call key.If certain features are in use, you may first need to turn those features off before you can make an emergency call. Consult this guide or your service provider.When making an emergency call, give all the necessary information as accurately as possible. Your wireless phone may be the only means of communication at the scene of an accident. Do not end the call until given permission to do so.■Certification information (SAR)THIS MOBILE DEVICE MEETS GUIDELINES FOR EXPOSURE TO RADIO WAVES.Your mobile device is a radio transmitter and receiver. It is designed not to exceed the limits for exposure to radio waves recommended by international guidelines. These guidelines were developed by the independent scientific organization ICNIRP and include safety margins designed to assure the protection of all persons, regardless of age and health.The exposure guidelines for mobile devices employ a unit of measurement known as the Specific Absorption Rate or SAR. The SAR limit stated in the ICNIRP guidelines is 2.0 watts/kilogram (W/kg) averaged over ten grams of tissue. Tests for SAR are conducted using standard operating positions with the device transmitting at its highest certified power level in all tested frequency bands. The actual SAR level of an operating device can be below the maximum value because the device is designed to use only the power required to reach the network. That amount changes depending on a number of factors such as how close you are to a network base station. The highest SAR value under the ICNIRP guidelines for use of the device at the ear is 0.80 W/kg.
Additional safety information92FCC DRAFTUse of device accessories and enhancements may result in different SAR values. SAR values may vary depending on national reporting and testing requirements and the network band. Additional SAR information may be provided under product information at www.nokia.com.Your mobile device is also designed to meet the requirements for exposure to radio waves established by the Federal Communications Commission (USA) and Industry Canada. These requirements set a SAR limit of 1.6 W/kg averaged over one gram of tissue. The highest SAR value reported under this standard during product certification for use at the ear is 1.25 W/kg and when properly worn on the body is 0.92 W/kg. Information about this device model can be found at http://www.fcc.gov/oet/fccid by searching the equipment authorization system using FCC ID: QMNRM-121.■Technical informationDimensions: Width (43 mm), Length (81 mm), Depth (22 mm)Weight: 78 g with BL-5C 970 mAh Li-Ion BatteryVolume: 66 ccWireless networks—CDMA 800Frequency range (Tx)—Cellular: 824.70–848.37 MHzFrequency range (Rx)—Cellular: 869.70–893.37 MHz■Battery informationThis section provides information about battery charging times with the Travel Charger (ACP-12), the Standard Charger (ACP-7), talk-times, and standby times. Be aware that the information in this section is subject to change. For more information, contact your service provider.Charging timesThe following charging times are approximate.Charger options with BL-5C 970 mAh Li-Ion BatteryACP-12 (800mA) - 1.5 hoursACP-7 (340mA) - 3.5 hoursTalk and standby timesOperation times are estimates only and depend on signal strength, phone use, network conditions, features used, battery age and condition (including charging habits), temperatures to which the battery is exposed, and many other factors.
Additional safety information93FCC DRAFTTalk time: up to 3.9 - 4.3 hoursStandby time: up to 5.3 - 8.8 days
Index94FCC DRAFTIndexNUMERICS1-touch dialing 45, 56Aalarm clock 71antenna 14anykey answer 56automate voicemail 37automatic keyguard 59automatic redial 56auto-update 63Bbattery 85charge 16charging times 93information 93talk and standby times 93business cards 49Ccalculator 76calendar 73call duration 40call forwarding 69call log 39call restrictions 67call settings 56call summary 58call waiting 70caller groups 45calling cards 56callsanswering 18in-call options 20making 17calorie calculator 80certification information (SAR) 91charger 65, 85connect 16times 93clear the cache 83clip-arts 50color schemes 63contacts 42add 42delete 47edit 46send 49settings 48view 48countdown timer 77currency converter 77Ddeleting call logs 40display brightness 64display settings 63distribution list 27Eemergency calls 91while using wireless Internet 82with keypad locked 59enhancement settings 65charger 65headset 65enhancements 84ESN 7exchange rate 77FFCC information 92feature codes 68Ggallery 50go to 55organize 55Go to functions 13Hheadset 16, 65helpgetting 7help text 12, 60
Index95FCC DRAFTIindicators and icons 10Insert the battery 14international dialing prefix 58Kkeyguard 20Llanguages 58lock code 66loudspeaker 19Mmenucontacts 42gallery 50messages 24organizer 71settings 54menu view 64grid 64list 64messagesdelete 34minibrowser messages 38multimedia messages 29text messages 24voice messages 35minibrowser 81minibrowser duration 41minibrowser messages 38mobile web 81multimedia messages 29Nnetwork 68network services 5, 68Nokia Customer Care 7Oon or off switch 16organizer 71Ppersonal shortcuts 55phone lock 66change lock code 66phone settings 58predictive text 22preferred carrier 56profiles 54activate 54customize 54timed 55Qquick keys 10RRadio 51register your phone 7restore factory settings 70roaming 68Ssafety guidelines 4screen saver 64screen savers 50scrolling 11security settings 65send own caller ID 70setdate 62time 62settings 54shared memory 6shortcuts 12standbytime 93standby mode 10start-up tone 60stopwatch 78switch phone on or off 16Ttalk time 93technical information 93text entry 21changing language 21
Index96FCC DRAFTpredictive mode 22standard mode 21text messages 24time and date settings 62to-do list 76tone settings 65tones 50Touch tones 59Uuser interface 11Vviewcall duration 40call times 40dialed numbers 39minibrowser duration 41missed calls 39own phone number 70received calls 39voice commands 61voice dialing 43voice messages 35voice recorder 52voicemail 36volumeadjusting 18using the loudspeaker 19Wwallpaper 63welcome note 60wireless Internet 81make an emergency call 82receive a call while online 82sign off 83sign on 81wireless networks 93

Navigation menu