Microsoft RM-13 GSM 900/1800/1900 w BT User Manual 8800 ENv1 9238830

Microsoft Mobile Oy GSM 900/1800/1900 w BT 8800 ENv1 9238830

UserManual.wiki >

RM 13 User Manual

Manual

1Nokia 8800 User Guide Draft 9232467Issue 1_draft07

2LEGAL INFORMATIONDECLARATION OF CONFORMITYWe, NOKIA CORPORATION declare under our sole responsibility that the product RM-13 is in conformity with the provisions of the following Council Directive:1999/5/EC.A copy of the Declaration of Conformity can be found at http://www.nokia.com/phones/declaration_of_conformity/.PART NO. 9238830, ISSUE NO. 1Copyright © 2005 Nokia. All rights reserved.Nokia, Nokia Connecting People, Nokia 8800, Pop-Port, PC Suite, and the Nokia Original Enhancements logos are trademarks or registered trademarks of Nokia Corporation. Other company and product names mentioned herein may be trademarks or trade names of their respective owners.Nokia tune is a sound mark of Nokia Corporation.US Patent No 5818437 and other pending patents. T9 text input software Copyright © 1999-2004. Tegic Communications, Inc. All rights reserved.Includes RSA BSAFE cryptographic or security protocol software from RSA Security.Java is a trademark of Sun Microsystems, Inc.Bluetooth is a registered trademark of Bluetooth SIG, Inc.USE OF THIS PRODUCT IN ANY MANNER THAT COMPLIES WITH THE MPEG-4 VISUAL STANDARD IS PROHIBITED, EXCEPT FOR USE DIRECTLY RELATED TO (A) DATA OR INFORMATION ENCODED BY A CONSUMER FOR PERSONAL AND NONCOMMERCIAL USE WITHOUT REMUNERATION; AND (B) OTHER USES SPECIFICALLY AND SEPARATELY LICENSED BY MPEG LA, L.L.C.The information contained in this user guide was written for the Nokia 8800 product. Nokia operates a policy of ongoing development. Nokia reserves the right to make changes to any of the products described in this document without prior notice.UNDER NO CIRCUMSTANCES SHALL NOKIA BE RESPONSIBLE FOR ANY LOSS OF DATA OR INCOME OR ANY SPECIAL, INCIDENTAL, AND CONSEQUENTIAL OR INDIRECT DAMAGES HOWSOEVER CAUSED. THE CONTENTS OF THIS DOCUMENT ARE PROVIDED "AS IS." EXCEPT AS REQUIRED BY APPLICABLE LAW, NO WARRANTIES OF ANY KIND, EITHER EXPRESS OR

3IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE, ARE MADE IN RELATION TO THE ACCURACY AND RELIABILITY OR CONTENTS OF THIS DOCUMENT. NOKIA RESERVES THE RIGHT TO REVISE THIS DOCUMENT OR WITHDRAW IT AT ANY TIME WITHOUT PRIOR NOTICE.EXPORT CONTROLS This device may contain commodities, technology, or software subject to export laws and regulations from the U.S. and other countries. Diversion contrary to law is prohibited.FCC/INDUSTRY CANADA NOTICE Your device may cause TV or radio interference (for example, when using a telephone in close proximity to receiving equipment). The FCC or Industry Canada can require you to stop using your telephone if such interference cannot be eliminated. If you require assistance, contact your local service facility. This device complies with part 15 of the FCC rules. Operation is subject to the condition that this device does not cause harmful interference.

Contents4Contents1. Welcome................................ 82. Getting started .................. 113. Your phone......................... 154. Phone security ................... 185. Call functions..................... 206. Phone menus...................... 227. Messages ............................ 238. Contacts ............................. 409. Call log ............................... 4710.Settings............................. 4911.Operator menu ................. 6012.Gallery............................... 6113.Media ................................ 6314.Organizer .......................... 6915.Applications...................... 7816.Web................................... 8017.SIM services...................... 8818.Computer connectivity .... 8919.Enhancements .................. 9020.Reference information..... 91Index..................................... 102

For your safety5For your safetyRead these simple guidelines. Not following them may be dangerous or illegal. Read the complete user guide for further information.SWITCH ON SAFELYDo not switch the device on when wireless phone use is prohibited or when it may cause interference or danger.ROAD SAFETY COMES FIRSTObey all local laws. Always keep your hands free to operate the vehicle while driving. Your first consideration while driving should be road safety.INTERFERENCEAll wireless phones may get interference, which could affect performance.SWITCH OFF IN HOSPITALSFollow any regulations or rules. Switch the phone off near medical equipment.SWITCH OFF IN AIRCRAFTFollow any restrictions. Wireless devices can cause interference in aircraft.SWITCH OFF WHEN REFUELLINGDon't use the phone at a refuelling point. Don't use near fuel or chemicals.SWITCH OFF NEAR BLASTINGFollow any restrictions. Don't use the phone where blasting is in progress.USE SENSIBLYUse only in the normal position as explained in the product documentation. Don't touch the antenna unnecessarily.QUALIFIED SERVICEOnly qualified personnel may install or repair this product.ENHANCEMENTS AND BATTERIESUse only approved enhancements and batteries. Do not connect incompatible products.

For your safety6BACKUP COPIESRemember to make back-up copies or keep a written record of all important information.WATER-RESISTANCEYour phone is not water-resistant. Keep it dry.CONNECTING TO OTHER DEVICESWhen connecting to any other device, read its user guide for detailed safety instructions. Do not connect incompatible products.EMERGENCY CALLSEnsure the phone is switched on and in service. Press the end key as many times as needed to clear the display and return to the start screen. Enter the emergency number, then press the call key. Give your location. Do not end the call until given permission to do so.■About your deviceThe wireless device described in this guide is approved for use on the EGSM 900, GSM 1800, and GSM 1900 networks.When using the features in this device, obey all laws and respect privacy and legitimate rights of others.Warning: To use any features in this device, other than the alarm clock, the phone must be switched on. Do not switch the device on when wireless phone use may cause interference or danger.■Network servicesTo use the phone you must have service from a wireless service provider. Many of the features in this device depend on features in the wireless network to function. These Network Services may not be available on all networks or you may have to make specific arrangements with your service provider before you can utilize Network Services. Your service provider may need to give you additional instructions for their use and explain what charges will apply. Some networks may have limitations that affect how you can use Network Services. For instance, some networks may not support all language-dependent characters and services.Your service provider may have requested that certain features be disabled or not activated in your device. If so, they will not appear on your device menu. Contact your service provider for more information.

For your safety7■Shared memoryThe phone has two different memories. The following features in this device may share the first memory: contacts, text messages, multimedia messages (but no attachments), instant messages, groups, voice tags, calendar, and to-do notes. The second shared memory is used by files stored in the Gallery, attachments of multimedia messages, e-mail, and Java applications. Use of one or more of these features may reduce the memory available for the remaining features sharing memory. For example, saving many JavaTM applications may use all of the available memory. Your device may display a message that the memory is full when you try to use a shared memory feature. In this case, delete some of the information or entries stored in the shared memory features before continuing. Some of the features, such as text messages, may have a certain amount of memory specially allotted to them in addition to the memory shared with other features.

Welcome81. WelcomeCongratulations on your purchase of the Nokia 8800 mobile phone. Since this is a product of superior design and craftsmanship, please handle your phone with special care. Besides the Nokia 8800 mobile phone’s stainless steel covers and scratch resistant glass display, some its other features include a calendar, a clock, an alarm clock, a radio, a music player, and a built-in camera.■UpdatesFrom time to time, Nokia may update this guide to reflect changes. The latest version may be available at www.nokiausa.com. Also, an interactive tutorial may be available at www.nokiausa.com.■Register your phoneMake sure to register your phone at www.warranty.nokiausa.com or call 1-888-NOKIA-2U (1-888-665-4228) so that we can serve your needs better if you should need to call a customer center or to have your phone repaired.■Get helpFind your phone labelIf you need to call the Nokia Customer Care Center or your service provider, you will need to provide specific information about your phone. This information is provided on the phone label (1), which is on the back of the phone (under the battery). It contains the model and serial numbers, as well as other important information about your phone.To help Nokia promptly answer your questions, please have the following information available before contacting the Nokia Customer Care Center: • Your phone model number (8800)• Type number (RM-13)• International mobile equipment identity (IMEI)

Welcome9• Your zip code• The phone or enhancement in question■Accessibility solutionsNokia is committed to making mobile phones easy to use for all individuals, including those with disabilities. For more information, visit the web site at www.nokiaaccessibility.com.■E-newslettersWhen you register your phone, you can sign up for the Nokia e-newsletter, Nokia Connections. You will receive tips and tricks on using your phone, enhancement information, and special offers.■Copyright protectionCopyright protections may prevent some images, ringing tones, and other content from being copied, modified, transferred, or forwarded.■Configuration settings serviceTo use some of the network services, such as mobile Internet services, multimedia messaging service (MMS), or remote Internet server synchronization, your phone needs the correct configuration settings. You may be able to receive the settings directly as a configuration message. After receiving the settings, you need to save them on your phone. The service provider may provide a PIN that is needed to save the settings. For more information on availability of the settings, contact your service provider.When you have received a configuration message, Configuration settings received is displayed. • To save the settings, select Show >Save. If the phone requests Enter settings' PIN:, enter the PIN code for the settings, and select OK. To receive the PIN code, contact the service provider who supplies the settings. If no settings are saved yet, these settings are saved and set as default configuration settings. Otherwise, the phone asks, Activate saved configuration settings?.• To discard the received settings, select Show > Discard.

Welcome10• To edit the settings, see "Configuration" on page 57.■Network supportThis device supports WAP 2.0 protocols (HTTP and SSL) that run on TCP/IP protocols. Some features of this device, such as text messages, multimedia messages, instant messages, e-mail, presence enhanced contacts, mobile Internet services, content and application downloads, and synchronization with a remote Internet server, require network support for these technologies.

Getting started112. Getting started■SIM card installationKeep all SIM cards out of the reach of small children. For availability and information on using SIM card services, contact your SIM card vendor. This may be the service provider, network operator, or another vendor. Before installing the SIM card and removing the battery, always make sure that the phone is switched off and disconnected from any enhancement.The SIM card and its contacts can easily be damaged by scratches or bending, so be careful when handling, inserting, or removing the card. To install the SIM card:1. Push the sideways release buttons to release the back cover of the phone.2. Slide the back cover to remove it from the phone.3. Remove the battery, as shown in the illustration.4. Insert the SIM card into the SIM card holder as shown. Make sure that the gold colored contact area on the SIM card is facing downwards.

Getting started125. Position the battery so the gold colored contacts match up with those on the phone. Insert the battery, contact end first into the battery slot. Snap the other end of the battery into place. 6. Slide the back cover into place.■Charge the batteryWarning: Use only batteries, chargers, and enhancements approved by Nokia for use with this particular model. The use of any other types may invalidate any approval or warranty, and may be dangerous.This device is intended for use with the BL-5X battery. Always use original Nokia batteries. See "Nokia battery authentication guidelines" on page 92.Check the model number of any charger before use with this device. This device is intended for use when supplied with power from the ACP-12 charger.For availability of approved enhancements, please check with your dealer. 1. Connect the charger to a standard wall outlet.2. Insert the charger plug into the round jack in the bottom of the phone. If the battery is completely empty, it may take a few minutes before the charging indicator appears on the display or before any calls can be made.3. Disconnect the charger from the phone when the battery is fully charged.You can use the phone while the charger is connected. The charging time depends on the charger and the battery used. For example, charging a BL-5X

Getting started13battery with the ACP-12 charger takes approximately 1 hour and 5 minutes while the phone is in the standby mode.■Turn the phone on and offWarning: Do not switch the phone on when wireless phone use is prohibited or when it may cause interference or danger.Press and hold the power key as shown. If the phone asks for a PIN, enter the code, and select OK.When you turn on your phone for the first time, the phone is in standby mode (see "Standby mode" on page 16) and a query appears, asking for the configuration settings from your service provider (network service). Confirm or decline the query. See "Configuration settings service" on page 9.■Open the keypad1. Hold the phone in one hand.2. With the other hand, press your thumb on the part of the phone that is below the display screen.3. Push the top part of the phone (slide) upwards, as shown in the illustration. ■Normal operating positionUse the phone only in its normal operating position. Your device has an internal antenna.

Getting started14Note: As with any other radio transmitting device, do not touch the antenna unnecessarily when the device is switched on. Contact with the antenna affects call quality and may cause the device to operate at a higher power level than otherwise needed. Avoiding contact with the antenna area when operating the device optimizes the antenna performance and the battery life.

Your phone153. Your phone■Keys and parts• Power key (1)• Loudspeaker (2)• Earpiece (3)• Left selection key (4)Right selection key (5)Middle selection key (6)The function of the selection key depends on the guiding text shown on the display above the key.• 4-way scroll key (7) that allows you to scroll up, down, left and right.• Call key (8) dials a phone number and answers a call• End key (9) ends an active call and allows you to exit from any function• Battery cover release buttons (10)• Microphone (11)• Charger connector (12)• Enhancements connector (13)• Camera lens (14)• Headset HS-15, rotating clip (15)15

Your phone16■Standby modeWhen you turn on your phone, the first screen that appears is the start screen, which indicates your phone is in the standby mode. When your phone is in the standby mode, the selection keys access specific functions, and the indicators appear on the start screen. Indicators show the status of the phone.• The name of the wireless service provider (1) displays in the middle of the start screen. • The signal strength indicator (2) shows the strength of the signal to your phone. The higher the bar, the stronger the signal.• The battery strength indicator (3) shows how much power is left in your phone battery. The higher the bar, the more power in the battery.• The left selection key (4) in the standby mode is Go to. Your most frequently used functions can be quickly accessed from the Go to menu.To activate a function, select it.To view a list with available functions, select Options > Select options. To add a function to the shortcut list, select Mark or to remove a function from the list, select Unmark.To rearrange the functions in your personal shortcut list, select Options > Organize. Scroll to the function you want, select Move, and scroll to where you want to move the function.• The middle selection key in the standby mode is Menu (5).• The right selection key in the standby mode may be Names (6) to access the Names menu, an operator-specific key to access an operator’s home page, or a specific function that you have selected in the right selection key menu.Power saving screen saverTo save power, a digital clock screen saver overwrites the display when no function of the phone has been used for a certain period of time. Select Menu > Settings > Display > Power saver > On to activate the screen saver or press any key to deactivate it.

Your phone17■Indicators and iconsYour phone has two types of identifiers: indicators and icons. IndicatorsSee "Standby mode" on page 16 for information on indicators.IconsIcons are graphical representations of a specific item or situation. The following list describes each icon.You have received one or several text or multimedia messages. You have received one or several multimedia messages.The phone registered a missed call. The phone keypad is locked. The phone does not ring for an incoming call or text message when Incoming call alert is set to Off and Message alert tone is set to Off.The alarm clock is set.Shown in the top left of the display when the packet data connection mode Always online is selected and the packet data service is available. Shown in the top left of the display when the packet data connection is established. Shown in the top right of the display when the packet data connection is suspended (on hold); for example, if there is an incoming or outgoing call during the packet data connection. Indicates an active Bluetooth wireless connection.

Phone security184. Phone securityYour phone is equipped with different security features that allow you to avoid making accidental calls and prevent unauthorized use of your phone.■Keypad lock (keyguard)The keyguard disables your keypad to prevent accidental key presses.• To lock the keypad and the power key, close the slide and confirm Lock keypad? with Yes; or select Menu and press * within 3.5seconds.• To unlock the keypad, open the slide; or select Unlock and press * within 1.5 seconds.If the Security keyguard is set to On, enter the security code if requested.To answer a call when the keyguard is on, press the call key. When you end or reject the call, the keypad is automatically locked.When the keyguard is on, calls still may be possible to the official emergency number programmed into your phone. Enter the emergency number and press the call key.For information about Automatic keyguard and Security keyguard, see "Phone" on page 56.■Access codesSecurity codeThe security code (5 to 10 digits) helps to protect your phone against unauthorized use. The preset code is 12345. To change the code, and to set the phone to request the code, see "Security" on page 58.PIN codes, module PIN, and signing PINThe PIN (personal identification number) code and the UPIN (universal personal identification number) code (4 to 8 digits) help to protect your SIM card against unauthorized use. See "Security" on page 58.The PIN2 code (4 to 8 digits) may be supplied with the SIM card and is required to access some functions, such as call counters.

Phone security19The module PIN is required to access the information in the security module. See "Security module" on page 85. The signing PIN is required for the digital signature. See "Digital signature" on page 87. PUK codesThe PUK (personal unblocking key) code and the UPUK (universal personal unblocking key) code (8 digits) is required to change a blocked PIN code and UPIN code, respectively. The PUK2 code (8 digits) is required to change a blocked PIN2 code. Call restrictions passwordThe call restrictions password (4 digits) is required when using the Call restrictions function. See "Security" on page 58.Wallet codeThe wallet code (4 to 10 digits) is required to access the wallet services. For further information, see "Wallet" on page 71.

Call functions205. Call functions■Make a call1. Enter the phone number, including the area code. To delete an incorrect character, select Clear.For international calls, press * twice for the international prefix (the + character replaces the international access code) and then enter the country code, the area code without the leading 0, if necessary, and the phone number.2. To call the number, press the call key.3. To end the call or to cancel the call attempt, press the end key, or close the slide.1-touch dialingAssign a phone number to one of the 1-touch dialing keys, 2 to 9. Call the number by one of the following ways:• Press a 1-touch dialing key and then press the call key.•If 1-touch dialing is set to On, press and hold a 1-touch dialing key until the call is started. See 1-touch dialing in "Call" on page 55.■Answer or reject a call• Open the slide or press the call key to answer the call. To mute the ringing tone, select Silence.• To reject an incoming call when the slide is open, press the end key.If Forward if busy is activated in your voice is activated in your voice mailbox, the call is forwarded to your voice mail. If not, the call is rejected. If a compatible headset supplied with the headset key is connected to the phone, press the headset key to answer and end a call.Call waiting (network service)To answer the waiting call during an active call, press the call key. The first call is put on hold. To end the active call, press the end key.

Call functions21To activate the Call waiting function, see "Call" on page 55.■Options during a callMany of the options that you can use during a call are network services. For availability, contact your network operator or service provider.For some of the following options, select Options during a call:Mute or Unmute, Contacts, Menu, Record, Lock keypad, Audio enhancing, Loudspeaker or Handset, and the network services Hold or Unhold, Answer and Decline, New call, Touch tones (to send tone strings), Swap (to switch between the active call and the call on hold), Transfer calls (to connect a call on hold to an active call and disconnect yourself), Conference (to make a conference call that allows up to five persons to take part in a conference call), Add to conference, Private call (to discuss privately in a conference call), End call, and End all calls.Do not hold the device near your ear when the loudspeaker is in use, because the volume may be extremely loud.

Phone menus226. Phone menusPhone features are grouped according to function and are accessed through the main menus of your phone. Each main menu contains submenus and lists from which you can select or view items and customize phone features. You can access these menus and submenus by using the scroll method. Some menus may not be available, depending on your network. For more information, contact your service provider.■Menu viewsYour phone may have two types of menu views: List and Grid.In the List interface, images introduce every menu. Use the scroll up and scroll down keys to navigate through the menus. As you scroll through the menus, the menu number appears in the upper right corner of the display. Below the menu number is a scroll bar with a tab. The tab moves up or down as you scroll through the menus, providing a visual representation of your current position in the menu structure.In the Grid interface, multiple menu icons appear on a single display. Use the four-way scroll key to navigate through the icons. The name of the menu appears at the top of the display and the icon for the selected menu is outlined.To change the menu view, select Options > Main menu view > List or Grid.■Access a menu function1. Select Menu and the menu you want.2. If the menu contains submenus, select the one that you want.3. If the selected menu contains further submenus, select the one that you want 4. To return to the previous menu level, select Back. To exit the menu, select Exit.

Messages237. MessagesYou can use mobile messages to keep in touch with friends, family, and business associates by using the short message service (SMS). Not all messaging features are available in all wireless networks. Contact your service provider for availability and subscription information.When sending messages, your phone may display the words Message sent. This is an indication that the message has been sent by your device to the message centre number programmed into your device. This is not an indication that the message has been received at the intended destination. For more details about messaging services, check with your service provider.■Text messages (network service)Your device supports the sending of text messages beyond the character limit for a single message. If your message exceeds 160 characters, it will be sent as a series of two or more messages. In the navigation bar, you can see the message length indicator counting backwards from 160. For example, 10/2 means that you can still add 10 characters for the text to be sent as two messages.Using special (Unicode) characters, such as ë, â, á, ì, takes up more space. If there are special characters in your message, the indicator may not show the message length correctly. Before the message is sent, the device tells you if the message exceeds the maximum length allowed for one message. You can cancel sending by selecting Cancel or you can save the message in the inbox. You can add pictures and templates to your text messages. Text templates are indicated by and picture templates are indicated by . Each picture message is made up of several text messages. Therefore, sending one picture message may cost more than sending one text message. Contact your service provider for pricing information.Before you can send any text, picture, or e-mail message, you need to save some message settings. See "Message settings" on page 36.To check SMS e-mail service availability and to subscribe to the service, contact your service provider.

Messages24Text entryYou can enter text while writing messages by using traditional or predictive text input. When using traditional text input, press a number key, 1 to 9, repeatedly until the character you want appears. In predictive text input you can enter a letter with a single key press.When you write text, appears at the top left of the display, indicating predictive text input, and appears, indicating traditional text input. , , or appears next to the text input indicator, indicating the character case. To change the character case, press #. indicates number mode. To change from the letter to number mode, press and hold #, and select Number mode.SettingsTo set the writing language to a language other than that selected (see Phone language on page 56), select Options > Writing language. Predictive text input is only available for the languages on the list.To set the predictive text input option, select Options > Dictionary on, or to set traditional text input option select Options > Dictionary off.Predictive text inputPredictive text input allows you to write text quickly by using the phone keypad and a built-in dictionary.1. Start writing a word, using the keys, 2 to 9, and press each key only once for one letter. The word changes after each keystroke.2. When you finish writing the word and it is correct, press 0.3. If a displayed word is not correct, press * repeatedly or select Options > Matches. When the word that you want appears, select Use.4. If the ? character is displayed after the word, the word you intended to write is not in the dictionary. To add the word to the dictionary, select Spell. The phone displays the entered letters. Enter the word (traditional text input is used), and select Save.Traditional text inputPress a number key, 1 to 9, repeatedly until the character you want appears. Not all characters available under a number key are printed on the key. The characters available depend on the selected writing language. See "Settings" on page 24

Messages264. To send the message to the displayed number, select Send > OK.TemplatesTo access the template list, select Menu > Messages > Saved items > Text messages > Templates. ■Multimedia messages (network service)Note: Only devices that offer compatible multimedia message or e-mail features can receive and display multimedia messages. Multimedia message objects may contain viruses or otherwise be harmful to your device or PC. Do not open any attachment if you are not sure of the trustworthiness of the sender.A multimedia message can contain text, sound, a picture, a calendar note, a business card, or a video clip. The phone supports multimedia messages that are up to 300KB in size. If the message is too large, the phone may not be able to receive it. Some networks allow text messages that include an Internet address where you can view the multimedia message.Multimedia messaging supports the following formats:• Picture: JPEG, GIF, WBMP, BMP, and PNG• Sound: MP3, AAC, Scalable polyphonic MIDI (SP-MIDI), AMR audio and monophonic ringing tones• Video clips: 3GP format with QCIF and SubQCIF image size and AMR, WB AMR, or ACC LC audioYou cannot receive multimedia messages during a call, a game, another Java application, or an active browsing session over GSM data. Because delivery of multimedia messages can fail for various reasons, do not rely solely upon them for essential communications.Write and sendTo set the settings for multimedia messaging, see "Multimedia" on page 37. To check availability and to subscribe to the multimedia messaging service, contact your service provider.1. Select Menu > Messages > Create message > Multimedia msg.2. Enter a message. See "Text entry" on page 24.

Messages27• To insert a file from the Gallery, select Options > Insert > Image, Sound clip or Video clip and the option you want.If you select Options >Insert > New sound clip, the Recorder opens, and you can start a new recording. When you have finished the recording, it is added to the message.If you select Options >Insert >New image, the Camera opens, and you can take a new photo to add to the message.• To insert a business card or a calendar note in the message, select Options > Insert > Business card or Calendar note.• Your phone supports multimedia messages that contain several pages (slides). Each slide can contain text, one image, a calendar note, a business card, and one sound clip. To insert a slide in the message, select Options > Insert > Slide.To open the slide you want (if the message contains several slides), select Options > Previous slide > Next slide or Slide list.To set the interval between the slides, select Options > Slide timing. To move the text component to the top or bottom of the message, select Options > Place text first or Place text last.• The following options may also be available: Delete to delete an image, slide or sound clip from the message, Clear text, Preview, Save message. In More options, the following options may be available: Insert contact, Insert number, Message details, and Edit subject.3. To send the message, select Send > Recently used, To phone number, To e-mail address or To many.4. Enter the recipient’s phone number or e-mail address, or search for it in Contacts > Names. Select OK and the message is moved to the Outbox folder for sending.While the multimedia message is being sent, the animated icon is displayed and you can use other functions on the phone. If the sending fails, the phone tries to resend it a few times. If this fails, the message remains in the Outbox folder and you can try to resend it later.If Save sent messages > Yes is selected, the sent message is saved in the Sent items folder. See "Multimedia" on page 37. When the message is sent, it is

Messages28not an indication that the message has been received at the intended destination.Read and replyThe default setting of the multimedia message service is generally on. The appearance of a multimedia message may vary depending on the receiving device.When your phone is receiving a multimedia message, the animated icon is displayed. When the message has been received, and the text Multimedia message received are shown.1. To read the message, select Show. To view it later, select Exit.To read the message later, select Menu > Messages > Inbox. In the list of messages, indicates an unread message. Select the message that you want to view.2. The function of the middle selection key changes according to the currently displayed attachment in the message.To view the whole message if the received message contains a presentation, select Play.Otherwise, select Play to listen to a sound clip or view a video clip attached to the message. To zoom in on an image, select Zoom. To view a business card or a calendar note, or to open a theme object, select Open. To open a streaming link, select Load.3. To reply to the message, select Options > Reply > Text message or Multimedia msg. Enter the reply message, and select Send. You can send the reply message only to the person who sent you the original message.Select Options and some of the following options may be also available: Play presentation, View text, Open image, Open sound clip or Open video clip, Save image, Save sound clip, Save video clip, Details, Delete message, Reply, Reply to all, Forward to no., Forward to e-mail or Forward to many, Edit, and Message details.Memory fullWhen you have a new multimedia message waiting and the memory for the messages is full, blinks and Multimedia memory full. View waiting

Messages29message. is shown. To view the waiting message, select Show. To save the message, select Save. To delete old messages, select the folder and the message you want to delete.To discard the waiting message, select Exit > Yes. If you select No, you can view the message.FoldersThe phone saves received text and multimedia messages in the Inbox folder.Multimedia messages that have not yet been sent are moved to the Outbox folder.If you have selected Message settings > Text messages >Save sent messages > Yes > Message settings > Multimedia msgs.> Save sent messages > Yes, the sent messages are saved in the Sent items folder.To save the text message that you are writing and wish to send later in the Saved items folder, select Options > Save message > Saved text msgs. For multimedia messages, select the option Save message. indicates unsent messages.To organize your text messages, you can move some of them to My folders, or add new folders for your messages. Select Messages > Saved items > Text messages > My folders.To add a folder, select Options > Add folder. If you have not saved any folders, select Add.To delete or rename a folder, scroll to the folder you want, and select Options > Delete folder or Rename folder.■Instant messaging (network service)You can take text messaging to the next level by experiencing instant messaging (IM) in a wireless environment. You can engage in instant messaging with friends and family, regardless of the mobile system or platform (like the Internet) they are using, as long as you all use the same instant messaging service.Before you can start using instant messaging, you must first subscribe to your wireless service provider’s text messaging service and register with the instant messaging service you want to use. You must also obtain a user name and password before you can use instant messaging. See "Register with an instant messaging service" on page 30 for more information.

Messages30Note: Depending on both your IM service provider and your wireless service provider, you may not have access to all of the features described in this guide.To set the required settings for the instant messaging service, see Connect. settings in "Access" on page 30. The icons and texts on the display may vary, depending on the instant messaging service.Depending on the network, the active instant messaging conversation may consume the phone battery faster, and you may need to connect the phone to a charger.Register with an instant messaging serviceYou can do this by registering over the Internet with the IM service provider you have selected to use. During the registration process, you will have the opportunity to create the user name and password of your choice. For more information about signing up for instant messaging services, contact your wireless service provider.AccessTo access the menu while still offline, select Menu > Messages > Instant messages. If more than one set of connection settings for instant messaging service is available, select the one you want. If there is only one set defined, it is selected automatically.The following options are shown: Login to connect to the instant messaging service, Saved conversations to view, erase or rename the instant messages conversations that you have saved during the instant messages session, or Connect. settings to edit the settings needed for messaging and presence connection.ConnectTo connect to the instant messaging service, open the Instant messages menu, activate an instant messaging service, and select Login. When the phone has successfully connected, Logged in is displayed.To disconnect from the instant messaging service, select Logout.SessionsConnect to the instant messaging service and select one of the following

Messages31Conversations to view the list of new and read instant messages or invitations to instant messaging during the active instant messaging session. Scroll to the message or invitation that you want and select Open to read the message.• indicates a new group message• indicates a read group message• indicates a new instant message• indicates a read instant message • indicates an invitationThe icons and texts on the display may vary, depending on the instant messaging service you have selected.IM contacts includes the contacts that you have added. Scroll to the contact with whom you would like to chat and select Chat or Open if a new contact is shown in the list. To add contacts see "IM contacts" on page 32. indicates the online and the offline contacts in the phone contacts memory. indicates a blocked contact. indicates a contact that has been sent a new message.Groups > Public groups. The list of bookmarks to public groups provided by the service provider is displayed. To start a instant messaging session with a group, scroll to a group, and select Join. Enter the screen name that you want to use in the conversation. When you have successfully joined the group conversation, you can start a group conversation. To create a private group, see "Groups" on page 33.Search > Users or Groups to search for other instant messaging users or public groups on the network by phone number, screen name, e-mail address, or name. If you select Groups, you can search for a group by a member in the group, or by group name, topic, or ID.To start the conversation when you have found the user or the group that you want, select Options > Chat or Join group.Accept or reject an invitationIn the standby mode, when you are connected to the instant messaging service and you receive a new invitation, New invitation received is displayed. To read it, select Read. If more than one invitation is received, scroll to the invitation you want, and select Open. To join the private group conversation, select Accept, and enter the screen name; or to reject or delete the invitation, select Options > Reject or Delete.

Messages32Read an instant messageIn the standby mode, when you are connected to the instant messaging service, and you receive a new message that is not a message associated with an active conversation, New instant message is displayed. To read it, select Read. If you receive more than one message, scroll to the message, and select Open.New messages received during an active conversation are held in Instant messages > Conversations. If you receive a message from someone who is not in IM contacts, the sender ID is displayed. To save a new contact that is not in the phone memory, select Options > Save contact.Participate in a conversationJoin or start an IM session by selecting Write. Write your message, and select Send or press the call key to send it. If you select Options, some of the following options are available: View conversation, Save contact, Group members, Block contact, and End conversation.Set your availabilityYou can determine if other users can tell whether you are available or not.1. Connect to the instant messaging service.2. To view and edit your own availability information, or screen name, select My settings.3. To allow all the other instant messaging users to see you as being online, select Availability > Available for all.To allow only the contacts in your instant messaging contacts list to see you as being online, select Availability > Avail. for contacts.To appear as being offline, select Availability > Appear offline.When you are connected to the instant messaging service, indicates that you are online and that you are not visible to others.IM contactsTo add contacts to the instant messaging contacts list, connect to the instant messaging service, and select IM contacts. To add a contact to the list, select Options > Add contact, or if you have no contacts added, select Add. Select Enter ID manually, Search from serv., Copy from server, or By mobile number.

Messages33Scroll to a contact, and to start a conversation, select Chat, or select Options > Contact info, Block contact (or Unblock contact), Add contact, Remove contact, Change list, Copy to server, or Availability alerts.Block or unblock messagesTo block messages, connect to the instant messaging service, and select Conversations > IM contacts; or join or start a conversation. Scroll to the contact from whom you want to block incoming messages, select Options > Block contact > OK.To unblock the messages, connect to the instant messaging service, and select Blocked list. Scroll to the contact from whom you want to unblock the messages, and select Unblock.GroupsYou can create your own private groups for an instant messaging conversation, or use the public groups provided by the service provider. The private groups exist only during an instant messaging conversation, and the groups are saved on the server of the service provider. If the server you are logged into does not support group services, all group-related menus are dimmed.PublicYou can bookmark public groups that your service provider may maintain. Connect to the instant messaging service, and select Groups > Public groups. Scroll to a group with which you want to chat, and select Join. If you are not in the group, enter your screen name as your nickname for the group. To delete a group from your group list, select Options > Delete group. To search for a group, select Groups > Public groups > Search groups. You can search for a group by a member in the group, by group name, topic, or ID.PrivateConnect to the instant messaging service, and select Groups > Create group. Enter the name for the group and the screen name that you want to use. Mark the private group members in the contacts list, and write an invitation.■E-mail applicationThe e-mail application allows you to access your compatible e-mail account from your phone when you are not in the office or at home. This e-mail application is different from the SMS e-mail function.

Messages34Your phone supports POP3 and IMAP4 e-mail servers. Before you can send and retrieve any e-mails, you may need to do the following: • Obtain a new e-mail account or use the current one. For availability of your e-mail account, contact your e-mail service provider. • For the settings required for e-mail, contact your e-mail service provider. You may receive the e-mail configuration settings as a configuration message. See "Configuration settings service" on page 9. You can also enter the settings manually. See "Configuration" on page 57. To activate the e-mail settings, select Menu > Messages > Message settings > E-mail messages. See "E-mail" on page 37.This application does not support keypad tones.Write and send1. Select Menu > Messages > E-mail > Create e-mail.2. Enter the recipient’s e-mail address, a subject, and the e-mail message.3. To attach a file to the e-mail, select Options > Attach and the file you want from the Gallery.4. Select Send > Send now.Download1. To download e-mail messages that have been sent to your e-mail account, select Menu > Messages > E-mail > Retrieve.2. To download new e-mail messages and to send e-mails that have been saved in the Outbox folder, select Menu > Messages > E-mail > Options > Retrieve and send.3. To first download the headings of the new e-mail messages that have been sent to you e-mail account, select Options > Check new e-mail. Then, to download the selected e-mails, mark the ones you want, and select Options > Retrieve.4. Select the new message in Inbox. To view it later, select Back. indicates an unread message.

Messages35Read and replySelect Menu > Messages > E-mail > Inbox and Options to view the available options.To reply to an e-mail, select Reply > Original text or Empty screen. To reply to many e-mails, select Options > Reply to all. Confirm or edit the e-mail address and subject, then write your reply. To send the message, select Send > Send now.Inbox and other foldersYour phone saves e-mails that you have downloaded from your e-mail account in the Inbox folder. Other folders contains the following folders: Drafts for saving unfinished e-mails, Archive for organizing and saving your e-mails, Outbox for saving e-mails that have not been sent, and Sent items for saving e-mails that have been sent.To manage the folders and their e-mail content, select Options > Manage folder.Delete messages1. Select Menu > Messages > E-mail > Options > Manage folder and the folder you want.2. Select the messages that you want to delete and Options > Delete.Deleting an e-mail from your phone does not delete it from the e-mail server. To set the phone to delete the e-mail from the e-mail server, select Menu > Messages > E-mail > Options > Extra settings > Leave c. on server > Delete retr. msgs.■Voice messages (network service)If you subscribe to voice mail, your service provider will furnish you with a voice mailbox number. You need to save this number to your phone to use voice mail. When you receive a voice message, your phone lets you know by beeping, displaying a message, or both. If you receive more than one message, your phone shows the number of messages received.To call your voice mailbox, select Menu > Messages > Voice messages > Listen to voice messages. To enter, search for, or edit your voice mailbox number, select Voice mailbox number.If supported by the network, shows new voice messages. Select Listen to call your voice mailbox number.

Messages37MultimediaThe message settings affect the sending, receiving, and viewing of multimedia messages.Select Menu > Messages > Message settings > Multimedia msgs. and one of the following options:•Save sent messages > Yes to set the phone to save sent multimedia messages in the Sent items folder. •Delivery reports to ask the network to send delivery reports about your messages (network service).•Scale image down to define the image size when you insert an image to a multimedia message.•Default slide timing to define the default time between slides in multimedia messages.•Allow multimedia reception. To receive or to block the multimedia message, select Yes or No. If you select In home network, you cannot receive multimedia messages when outside your home network.•Incoming multimedia messages. To allow the reception of multimedia messages automatically, manually after being prompted, or to reject the reception, select Retrieve, Retrieve manually, or Reject, respectively.•Configuration settings > Configuration. Only the configurations that support multimedia messaging are shown. Select a service provider, Default, or Personal config. for multimedia messaging.Select Account and a multimedia messaging service account contained in the active configuration settings.•Allow advertisements to receive or reject advertisements. This setting is not shown if Allow multimedia reception is set to No.E-mailThe settings affect the sending, receiving and viewing of e-mail.You may receive the configuration settings for the e-mail application as a configuration message. See "Configuration settings service" on page 9. You can also enter the settings manually. See "Configuration" on page 57.

Messages38To activate the settings for the e-mail application, select Menu > Messages > Message settings > E-mail messages and one of the following options:•Configuration. Select the set that you would like to activate.•Account. Select an account provided by the service provider.•My name. Enter your name or nickname.•E-mail address. Enter your e-mail address.•Include signature. You can define a signature that is automatically added to the end of your e-mail when you write your message.•Reply-to address. Enter the e-mail address to which you want the replies to be sent.•SMTP user name. Enter the name that you want to use for outgoing mail.•SMTP password. Enter the password that you want to use for outgoing mail.•Display terminal window. Select Yes to perform manual user authentication for intranet connections.•Incoming server type. Select either POP3 or IMAP4 depending on the type of e-mail system that you are using. If both types are supported, select IMAP4.•Incoming mail settings If you selected POP3 as the incoming server type, the following options are shown: Retrieve e-mails, POP3 user name, POP3 password, and Display terminal window.If you selected IMAP4 as the incoming server type, the following options are shown: Retrieve e-mails, Retrieval method, IMAP4 user name, IMAP4 password, and Display terminal window.Other settingsTo select other settings for messages, select Menu > Messages > Message settings > Other settings. • To change the font size for reading and writing messages, select Font size.• To set the phone to replace character-based smileys into graphical ones, select Graphical smileys > Yes.

Messages39Message counterThe message counter gives you information on how many text messages have been sent and received. You can view the amount of sent and received messages, view details about the messages and reset the counter. To access the message counter, select Menu > Messages > Message counter.

Contacts408. ContactsIn Contacts, you can store and manage contact information, such as names, phone numbers, and addresses. You can save names and numbers in the internal memory of the phone, the SIM card memory, or in a combination of the two. Names and numbers saved in the SIM card memory, are indicated by . ■SearchSelect Menu > Contacts > Names > Options > Find and scroll though the list of contacts or enter the first letter of the name you are trying to find.■Save names and phone numbersNames and numbers are saved in the used memory. 1. Select Menu > Contacts > Names > Options > Add new contact.2. Enter the name and the phone number.■Save numbers, items, or an imageIn the phone memory for contacts, you can save different types of phone numbers and short text items per name.The first number you save is automatically set as the default number, and it is indicated with a frame around the number type indicator (for example, ). When you select a name, the default number is used unless you select another number.1. Make sure that the memory in use is either Phone or Phone and SIM. 2. Scroll to the name to which you want to add a new number or text item, and select Details > Options > Add detail.3. To add a number, select Number and one of the number types.4. To add another detail, select a text type, or an image from the Gallery.5. To search for an ID from the server of your service provider (if you have connected to the presence service), select User ID > Search. See "My presence (network service)" on page 42. If only one ID is found, it is

Contacts41automatically saved. Otherwise, to save the ID, select Options > Save. To enter the ID, select Enter ID manually.6. To change the number type, scroll to the number you want, and select Options >Change type. To set the selected number as the default number, select Set as default.7. Enter the number or text item; to save it, select OK.8. To return to standby mode, select Back > Exit.■Copy a contactSearch for the contact you want to copy, and select Options > Copy. You can copy names and phone numbers from the phone contact memory to the SIM card memory, or vice versa. The SIM card memory can save names with one phone number attached to them.■Edit contact details1. Search for the contact you want to edit, select Details, and scroll to the name, number, text item, or image you want.2. To edit a name, number, or text item, or to change image, select Options > Edit name, Edit number, Edit detail, or Change image.You cannot edit an ID when it is on the IM contacts or the Subscribed names list.■Delete contacts or detailsTo delete all the contacts and the details attached to them from the phone or SIM card memory, select Menu > Contacts > Delete all contacts > From phone mem., or From SIM card. Confirm with the security code.To delete a contact, search for the contact you want, and select Options > Delete contact.To delete a number, text item, or an image attached to the contact, search for the contact, and select Options > Contact details. Scroll to the detail you want, and select Options >Delete > Delete number, Delete detail, or Delete image. Deleting an image from contacts does not delete it from the Gallery.

Contacts43■Subscribed namesYou can create a list of contacts for whom you want presence status information available. You can view the information, if it is allowed by the contacts and the network. To view these subscribed names, scroll through the contacts, or use the Subscribed names menu.Make sure that the memory in use is either Phone or Phone and SIM.To connect to the Presence service, select Menu > Contacts > My presence > Connect to 'My presence' service.Add contacts1. Select Menu > Contacts > Subscribed names.2. If you have no contacts in your list, select Add. Otherwise, select Options > Subscribe new. The list of your contacts is shown.3. Select a contact from the list and if the contact has an user ID saved, the contact is added to the subscribed names list.ViewTo view the presence information, see "Search" on page 40.1. Select Menu > Contacts > Subscribed names.The status information of the first contact in the subscribed names list is displayed. The information that the person wants to give to the others may include text and some of the following icons:, or indicate that the person is either available, discreet or not available. indicates that the person’s presence information is not available.2. Select Details to view the details of the selected contact; or select Options > Subscribe new, Chat, Send message, Send bus. card, or Unsubscribe.UnsubcribeTo unsubscribe a name, select Menu > Contacts > Subscribed names > Options > Unsubscribe.To unsubscribe a contact from the Contacts list, select the contact and Details; then select the user ID and Options > Unsubscribe > OK.

Contacts44■SettingsSelect Menu > Contacts > Settings, and select either Memory in use to select SIM card or phone memory for your contacts. To recall names and number from both memories, select Phone and SIM. In that case, the names and numbers will be saved in the phone memory. To select how the names and numbers in contacts are displayed, select Contacts view. To view the free and used memory capacity, select Memory status.■GroupsSelect Menu > Contacts > Groups to arrange the names and phone numbers saved in the memory into caller groups with a different ringing tone and a group image.■1-touch dialingTo assign a number to a 1-touch dialing key, select Menu > Contacts > 1-touch dialing, and scroll to the 1-touch dialing number that you want.Select Assign, or if a number has already been assigned to the key, select Options > Change. Select Find and the name first and then the number you want to assign. If the 1-touch dialing function is off, the phone asks whether you want to activate it. To make a call using 1-touch dialing, see "1-touch dialing" on page 20.■Voice dialingYou can make a phone call by saying a voice tag that has been added to a phone number. Any spoken words, such as a name, can be a voice tag. The number of voice tags you can create is limited.Before using voice tags, note that:• Voice tags are not language-dependent. They are dependent on the speaker's voice. • You must say the name exactly as you said it when you recorded it.• Voice tags are sensitive to background noise. Record voice tags and use them in a quiet environment.• Very short names are not accepted. Use long names and avoid similar names for different numbers.

Contacts45Note: Using voice tags may be difficult in a noisy environment or during an emergency, so you should not rely solely upon voice dialing in all circumstances.Add and manager voice tagsSave or copy to the phone memory the contacts for which you want to add a voice tag. You can also add voice tags to the names in the SIM card, but if you replace your SIM card with a new one, you first must delete the old voice tags before you can add new ones.1. Search for the contact to which you want to add a voice tag.2. Select Details, scroll to the phone number you want, and select Options > Add voice tag.3. Select Start, and say clearly the words you want to record as a voice tag. After recording, the phone plays the recorded tag. appears after the phone number with a voice tag in Contacts.To check the voice tags, select Menu > Contacts > Voice tags. Scroll to the contact with the voice tag that you want, and select an option to listen to, delete, or change the recorded voice tag.Make a call using a voice tagIf the phone has an application running that is sending or receiving data using a GPRS connection, you must end the application before voice dialing.1. In the standby mode, press and hold the right selection key. A short tone is heard, and Speak now is displayed.2. Say the voice tag clearly. The phone plays the recognized voice tag, and dials the phone number of the voice tag after 1.5 seconds.If you are using a compatible headset with the headset key, press and hold the headset key to start the voice dialing.■Info, service and my numbersSelect Menu > Contacts and one of the following functions, which may be available:Info numbers to call the information numbers of your service provider if the numbers are included on your SIM card (network service).

Contacts46My numbers to view the phone numbers assigned to your SIM card, if the numbers are included on your SIM card.Service numbers to call the service numbers of your service provider if the numbers are included on your SIM card (network service).

Call log479. Call logThe phone registers the phone numbers of identified missed, received, and dialed calls, and the approximate length of your calls. The phone registers missed and received calls only if the network supports these functions, and the phone is switched on and within the network’s service area.■Recent calls listWhen you select Options in the Missed calls, Received calls, Dialed numbers, or Message Recipients menu, you can view the time of the call; edit, view or call the registered phone number; add it to the memory; or delete it from the list. You can also send a text message. To delete the recent calls lists, select Delete recent call lists.■Counters and timersNote: The actual invoice for calls and services from your service provider may vary, depending upon network features, rounding-off for billing, taxes and so forth.Some timers may be reset during service or software upgrades.Select Menu > Call log > Call timers, Packet data counter, or Packet data conn. timer for approximate information on your recent communications.■Positioning informationThe network may send you a location request. You can ensure that the network will deliver location information of your phone only if you approve it (network service). Contact your service provider to subscribe and to agree upon the delivery of location information. Some networks allow you to request the position of the phone (network service).To accept or reject the location request, select Accept or Reject. If you miss the request, the phone automatically accepts or rejects it according to what you have agreed with your service provider. The phone displays 1 missed position request. To view the missed location request, select Show.

Call log48To view the information on the 10 most recent privacy notifications and requests or to delete them, select Menu > Call log > Positioning > Position log > Open folder or Delete all.

Settings51■Time and dateSelect Menu > Settings > Time and date and one of the following options:•Clock to set the phone to show the clock in the standby mode, adjust the clock, and select the time zone and the time format.•Date to set the phone to show the date in the standby mode, set the date, and select the date format and date separator.•Auto-update of date & time (network service) to set the phone to automatically update the time and date according to the current time zone.■My shortcutsYou can set your most frequently used functions to be quickly accessed through the My shortcuts feature.Right selection keyTo set a specific function (from a predefined list) to the right selection key, select Menu > Settings > My shortcuts > Right selection key. This function can be used only if it is supported by your service provider.Navigation keyTo assign other phone functions (from a predefined list) to the navigation key, select Menu > Settings > My shortcuts > Navigation key.Voice tagsTo activate phone functions by saying a voice tag, select Menu > Settings > My shortcuts > Voice commands. Select a folder, scroll to a function to which you want to add a voice tag, and select Add. indicates a voice tag.■ConnectivityYou can connect your phone to compatible devices by using Bluetooth wireless technology. You can also define the settings for packet data dial-up connections.

Settings53For maximum security, you should set your Bluetooth visibility to Hidden. To do this, select Menu > Settings > Connectivity > Bluetooth > Bluetooth settings > My phone's visibility or My phone's nameConnectionSelect Menu > Settings > Connectivity > Bluetooth. To check which Bluetooth connection is currently active, select Active device. To view a list of Bluetooth devices that are currently paired with the phone, select Paired devices.Select Options to access some of the following functions depending on the status of the device and the Bluetooth connection. Select Connect > Assign short name or Auto-conn. without confirmation.■Packet data (EGPRS) (network service)Enhanced general packet radio service (EGPRS), packet data, is a network service that allows mobile phones to send and receive data over an Internet protocol (IP)-based network. It enables wireless access to data networks, such as the Internet.The applications that may use packet data are MMS, video streaming, browsing sessions, e-mail, remote SyncML, Java application downloading, and the PC dial-up.To define how to use the service, select Menu > Settings > Connectivity > Packet data > Packet data connection and one of the following:•When needed — to set the packet data registration and connection to established when an application using packet data needs it and closed when you end the application.•Always online — to set the phone to automatically register to an packet data network when you switch the phone on. is shown.Modem settingsYou can connect the phone to a compatible computer by using Bluetooth wireless technology. The phone can be used as a modem to enable EGPRS connectivity from the computer.To define the settings for connections from the PC, select Menu > Settings > Connectivity > Packet data > Packet data settings > Active access point, activate the access point you want to use, and select Edit active access point. Select Alias for access point, and enter a nickname for the currently selected

Settings54access point. Select Packet data access point, and enter the access point name (APN) to establish a connection to an EGPRS network.You can also set the dial-up service settings (access point name) on the computer, by using the Nokia Modem Options software. See "Nokia PC Suite" on page 89. If you have set the settings both on the PC and your phone, the PC settings are used.Data transfer and synchronizationSynchronize your data from calendar, notes, and contacts with another compatible device (for example, a mobile phone), a compatible PC, or a remote Internet server (network service).Partner listTo copy or synchronize data from your phone, the name of the device and the settings must be in the list of partners in transfer contacts. If you receive data from another compatible device, the partner is automatically added to the list, using the contact data from the other device. Server sync and PC sync settings are the original items in the list.To add a new partner to the list, such as a new device, select Menu > Settings > Connectivity > Data transfer >Transfer contacts > Options > Add transfer contact > Phone sync or Phone copy, and enter the settings according to the transfer type.To edit the copy and synchronize settings, select a contact from the partner list, and select Options > Edit.To delete a selected partner, select Options > Delete. You cannot delete Server sync and Phone sync.Data transfer with a compatible deviceFor synchronization, Bluetooth wireless technology is used. The other device is in the standby mode.To start a data transfer, select Menu > Settings > Connectivity > Data transfer > Transfer contacts, and the transfer partner from the list, other than Server sync and Phone sync. Based upon the settings, the selected data will be copied or synchronized.Data transfer with SIM cardYour phone allows the data transfer without having a SIM card inserted.

Settings55Turn on your phone (with no SIM card inserted), and select Transfer and from the following options:Transfer contacts and select a contact, other than Server sync and Phone sync, from the partner list to transfer data from your phone. The phone starts a synchronization or copy session.Select Receive data >Via Bluetooth to receive data from the other phone.Synchronize from a compatible PCTo synchronize data from calendar, notes, and contacts from a compatible PC, use Bluetooth wireless technology. You also need the correct version of Nokia PC Suite software for your phone installed on the PC. See "Computer connectivity" on 89 for information about Nokia PC Suite.Synchronize the data in the phone contacts, calendar, and notes to correspond with the data of your compatible PC by starting the synchronization from the PC.Synchronize from a serverTo use a remote Internet server, you have to subscribe to a synchronization service. For more information and the settings required for this service, contact your service provider. You may receive the settings as a configuration message. See "Configuration settings service" on page 9 and "Configuration" on page 57.If you have saved data on the remote Internet server, you can synchronize your phone by starting the synchronization from your phone.Select Menu > Settings > Connectivity > Data transfer > Server sync. Depending on the settings, select Initializing sync or Initializing copy.If the contacts or calendar are full, synchronizing may take up to 30 minutes to complete, when synchronizing for the first time, or after an interrupted synchronization.■CallSelect Menu > Settings > Call and one of following options:•Call forwarding (network service) — to forward your incoming calls. You may not be able to forward your call if some call restrictions functions are active. See Call restrictions in "Security" on page 58. •Anykey answer > On — to answer an incoming call by briefly pressing any key, except the power key, the left and right selection keys, or the end key.

Settings56•Automatic redial > On — to set your phone to make a maximum of ten attempts to connect the call after an unsuccessful call attempt.•Audio enhancing > Active — to enhance speech intelligibility, especially in noisy environments.•1-touch dialing > On and the names and phone numbers assigned to the 1-touch dialing keys, 2 to 9. To dial, press and hold the corresponding number key.•Call waiting > Activate — to set the network to notify you of an incoming call while you have a call in progress (network service). See "Call waiting (network service)" on page 20.•Summary after call > On — to briefly display the approximate duration and cost (network service) of the call after each call.•Send my caller ID (network service) > Yes, or Set by network.•Line for outgoing calls (network service) — to select the phone line 1 or 2 to make calls, if supported by your SIM card.■PhoneSelect Menu > Settings > Phone and one of the following options: •Phone language — to set the display language of your phone. If you select Automatic, the phone selects the language according to the information on the SIM card.•Memory status — to view the free memory and the used memory for each function in the list.•Automatic keyguard — to set the keypad of your phone to lock automatically after a pre-set time delay when the phone is in the standby mode and no function of the phone has been used. Select On, and you can set the time from 5 seconds to 60 minutes.•Security keyguard — to set the phone to ask for the security code when you unlock the keyguard. Enter the security code, and select On. When the keyguard is on, calls still may be possible to the official emergency number programmed into your device.•Cell info display > On — to receive information from the service provider, depending on the network cell used (network service).

Settings58To save the configuration settings received as a configuration message, see "Configuration settings service" on page 9.Select Menu > Settings > Configuration and one of the following options:•Default configuration settings — to view the service providers saved in the phone. Scroll to a service provider, and select Details to view the applications that the configuration settings of this service provider supports. To set the configuration settings of the service provider as default settings, select Options > Set as default. To delete configuration settings, select Delete.•Activate default in all applications — to activate the default configuration settings for supported applications.•Preferred access point — to view the saved access points. Scroll to an access point, and select Options > Details to view the name of the service provider, data bearer, and packet data access point or GSM dial-up number.•Connect to service provider support — to download the configuration settings from your service provider.•Personal configuration settings — to add new personal accounts for various services manually, and to activate or delete them. To add a new personal account if you have not added any, select Add new; otherwise, select Options > Add new. Select the service type, and enter each of the required parameters. The parameters differ according to the selected service type. To delete or activate a personal account, scroll to it, and select Options > Delete or Activate.■SecurityWhen security features that restrict calls are in use (such as call restrictions, closed user group, and fixed dialing) calls still may be possible to the official emergency number programmed into your device.Select Menu > Settings > Security and one of the following options:•PIN code request — to set the phone to ask for your PIN or UPIN code every time the phone is switched on. Some SIM cards do not allow the code request to be turned off.•Call restrictions (network service) — to restrict incoming calls to and outgoing calls from your phone. A password is required.

Settings59•Fixed dialing — to restrict your outgoing calls to selected phone numbers, if this function is supported by your SIM card.•Closed user group (network service) — to specify a group of people whom you can call and who can call you.•Security level > Phone — the phone asks for the security code whenever a new SIM card is inserted into the phone. Select Memory and the phone asks for the security code when the SIM card’s memory is selected and you want to change the memory in use.•Access codes — to set the PIN code or UPIN code in use, or to change the security code, PIN code, UPIN code, PIN2 code, and call restrictions password.•Code in use — to select whether the PIN code or UPIN code should be active.•Pin2 code request — to select whether a PIN2 code is required when using a specific phone feature which is covered by the PIN2 code.■Restore factory settingsTo reset some of the menu settings to their original values, select Menu > Settings > Restore factory settings and enter the security code. Data that you have entered or downloaded is not deleted. For example, names and numbers in Contacts are not affected.

Operator menu6011. Operator menuYour service provider may have programmed an operator-specific menu into your phone. If this menu exists in your phone, its functions depend entirely upon the service provider. Contact your service provider for more information.

Gallery6112. GalleryIn this menu, you can manage graphics, images, recordings, and tones. These files are arranged in folders.Your phone supports an activation key system to protect acquired content. Always check the delivery terms of any content and activation key before acquiring them, as they may be subject to a fee.The files stored in the Gallery use a memory that may have a capacity of approximately 52 MB in the phone.1. Select Menu > Gallery.The original folders in the Gallery are: Images, Video clips, Music files, Themes, Graphics, Tones, Recordings, and Received files.2. Scroll to the folder you want, select Open, scroll to an image, tone or voice recording, select Options and one of the following options may be available: Downloads, Delete folder, Move, Rename folder, Details, Type of view, Sort, Add folder, Memory status, and Activation key list.3. Scroll to the file you want to view and select Open.4. Select Options, and use one of the following functions that may be available for the selected file: Downloads, Delete, Move, Rename, Apply theme, Set as wallpaper, Set as ring tone, Details, Type of view, Sort, Add folder, or Memory status.The following options are also available:Send — to send the selected file using MMS or Bluetooth wireless technology.Delete all — to delete all the files and folders in the selected folder.Edit image — to insert text, a frame, or clip-art into the selected picture, or to crop the image.Open in sequence — to view the files in the folder one by one.Zoom — to increase the size of the image.Mute audio (Unmute audio) — to mute (unmute) the sound file.Set contrast — to adjust the contrast level of the image.

Gallery62Activate content — to update the activation key of the selected file. The option is only shown if the activation key update is supported by the file.Activation key list — to view the list of all available activation keys. You can delete expired keys.

Media6313. Media■CameraYou can take photos or record video clips with the built-in camera. The camera produces pictures in JPEG format and video clips in 3GP format.When taking and using images or video clips, obey all laws and respect local customs, as well as privacy and legitimate rights of others.Take a photo1. Select Menu > Media > Camera > Capture.The phone saves the photo in Gallery > Images2. To take another photo, select Back.3. To send the photo as a multimedia message, select Send.4. To view the options, select Options.Record a video clipSelect Menu > Media > Camera. To select the video mode, scroll left or right, or select Options > Video, and select Record. To pause the recording, select Pause; to resume the recording, select Contin. To stop the recording, select Stop. The phone saves the recording in Gallery > Video clips. To view the options, select Options.■Media playerWith the media player you can view, play, and download files, such as images, audio, video and animated images. You can also view compatible streaming videos from a network server (network service).Select Menu > Media > Media player > Open gallery, Bookmarks, Go to address, or Media downloads. When pressing the navigation key right (fast forward button) or the navigation key left (rewind button), select FF/rew interval to set the length of a scrolling jump during streaming audio.

Media64Set for streaming serviceYou may receive the configuration settings required for the streaming as a configuration message from the network operator or service provider. See "Configuration settings service" on page 9. To enter the settings manually, see "Configuration" on page 57.Select Menu > Media > Media player > Streaming settings and one of the following options:Configuration — only the configurations that support streaming are shown. Select a service provider, Default, or Personal config.Account and a streaming service account contained in the active configuration settings.■Music playerYour phone includes a music player for listening to music tracks, recordings, or other MP3 or AAC sound files that you have transferred to the phone with the Nokia Audio Manager application. Music files are automatically detected and added to the default track list.Play music tracks1. Select Menu > Media > Music player. The details of the first track on the default track list are shown.2. To play a track, scroll to the track that you want, and select .3. To skip to the beginning of the next track, select . To skip to the beginning of the previous track, select twice.4. To rewind the current track, select and hold . To fast forward the current track, select and hold . Release the key at the position you want.5. To stop the playing, select .Warning: Listen to music at a moderate level. Continuous exposure to high volume may damage your hearing. Do not hold the device near your ear when the loudspeaker is in use, because the volume may be extremely loud.SettingsIn the Music player menu, the following options may be available:

Media65•Volume — to change the volume level by pressing the navigation key left or right•Play via bluetooth — to make a connection to an audio enhancement using a Bluetooth connection.•Track list — to view all the tracks available on the track list. To play a track, scroll to the track you want, and select Play. Select Options > Refresh all tracks or Change track list — to refresh the track list (for example, after adding new tracks to the list) or change the track list that is shown when you open the Music player menu, if several track lists are available in the phone.•Play options > Random > On — to play the tracks in the track list in random order. Select Repeat > Current track or All tracks to play the current track or the entire track list repeatedly.•Media equalizer — to open the list of media equalizer sets. See "Equalizer" on page 67.•Loudspeaker or Headset — to listen to the music player through the loudspeaker or a compatible headset connected to the phone. When using a headset, you can skip to the next track by pressing the headset key.•Send — to send the selected file using MMS or a Bluetooth connection.•Music downloads — to connect to a browser service related to the current track. This function is only available when the address of the service is included in the track.•Memory status — to view the free and used memory capacity.■RadioThe FM radio uses the wire of the headset as an antenna. A compatible headset needs to be attached to the device for the FM radio to function properly.Note: Listen to music at a moderate level. Continuous exposure to high volume may damage your hearing.Select Menu > Media > Radio. To use the graphical keys , , , or on the phone display, scroll left or right to the key you want and select it.

Media66Save channels1. To start the channel search, select and hold or . To change the radio frequency in 0.05 MHz steps, press or .2. To save the channel to a memory location 1 to 9, press and hold the corresponding number key.3. To save the channel in the memory location from 10 to 20, press 1 or 2, and press and hold the number key (0 to 9) you want.4. Enter the name of the channel, and select OK.Listen1. Select Menu > Media > Radio. 2. To scroll to the channel you want, select or , or press the headset key.3. To select a radio channel location, briefly press the corresponding number keys.4. Select Options and one of the following options:•Turn off — to turn off the radio.•Volume — to change the volume level by pressing the navigation key left or right.•Save channel — to save a new channel by entering the channel’s name.•Channels — to select the list of saved channels. To delete or rename a channel, scroll to the channel you want, and select Options > Delete channel or Rename.•Loudspeaker or Headset — to listen to the radio using the loudspeaker or headset. Keep the headset connected to the phone. The lead of the headset functions as the radio antenna.•Set frequency — to enter the frequency of the radio channel you want.You can normally make a call or answer an incoming call while listening to the radio. During the call, the volume of the radio is muted.When an application using a packet data or HSCSD connection is sending or receiving data, it may interfere with the radio.

Media67■RecorderYou can record pieces of speech, sound, or an active call. This is useful when recording a name and phone number for writing them down later.The recorder cannot be used when a data call or GPRS connection is active.Record sound1. Select Menu > Media > Recorder.2. To start the recording, select . To start the recording during a call, select Options > Record. While recording a call, all parties to the call hear a faint beeping sound approximately every five seconds. When recording a call, hold the phone in the normal position near to your ear.3. To end the recording, select .The recording is saved in Gallery > Recordings.4. To listen to the latest recording, select Options > Play last recorded.5. To send the last recording using Bluetooth, or as a multimedia message, select Options > Send last recorded.List of recordings1. Select Menu > Media > Recorder > Options > Recordings list. The list of folders in the Gallery is shown. 2. Open Recordings to see the list with recordings.3. Select Options to select options for files in the Gallery. See "Gallery" on page 61.Define a storage folderTo use a folder other than Recordings as the default folder in the Gallery, select Menu > Media > Recorder > Options > Select memory and a folder from the list.■EqualizerYou can control the sound quality when using the music player by amplifying or attenuating frequency bands.

Media681. Select Menu > Media > Equalizer.2. To activate a set, scroll to one of the equalizer sets, and select Activate.3. To view, edit, or rename a selected set, select Options > View, Edit, or Rename. Not all sets can be edited or renamed.

Organizer6914. OrganizerYour Nokia 8800 mobile phone has many useful features for organizing your everyday life. The following features are found in Organizer: alarm clock, calendar, to-do list, notes, wallet, calculator, countdown timer, and stopwatch.■Alarm clockThe alarm clock uses the time format set for the clock. The alarm clock works even when the phone is switched off if there is enough power in the battery. To set the alarm, select Menu > Organizer > Alarm clock > Alarm time, and enter the alarm time. To change the alarm time when the alarm time is set, select On. To set the phone to alert you on selected days of the week, select Repeat alarm.To select the alarm tone or set a radio channel as the alarm tone, select Menu > Organizer > Alarm clock > Alarm tone. If you select the radio as an alarm tone, connect the headset to the phone. The phone uses the last channel you listened to as the alarm, and the alarm plays through the loudspeaker. If you remove the headset or switch off the phone, the default alarm tone replaces the radio.To set a snooze time-out, select Snooze time-out.Alert tone and messageThe phone sounds an alert tone, and Alarm! and the current time are displayed, even if the phone is switched off. To stop the alarm, select Stop. If you let the phone continue to sound the alarm for a minute, or select Snooze, the alarm stops for the selected snooze timeout and then resumes.If the alarm time is reached while the device is switched off, the device switches itself on and starts sounding the alarm tone. If you select Stop, the device asks whether you want to activate the device for calls. Select No to switch off the device or Yes to make and receive calls. Do not select Yes when wireless phone use may cause interference or danger.■CalendarThe calendar helps you keep track of reminders, calls that you need to make, meetings, and birthdays.

Organizer70Select Menu > Organizer > Calendar.The current day is indicated by a frame. If there are any notes set for the day, the day is in bold type. To view the day notes, select View. To view a week, select Options > Week view. To delete all notes in the calendar, select the month or week view, and select Options > Delete all notes.Other options for the calendar day view can be make a note; delete, edit, move, or repeat a note; copy a note to another day; send a note with Bluetooth technology; or send a note as a text message or multimedia message to the calendar of another compatible phone. In Settings, you can set the date and time settings. In the Auto-delete notes option, you can set the phone to delete old notes automatically after a specified time.Make a note1. Select Menu > Organizer > Calendar and the date you want.2. Select Options > Make a note and one of the following note types: Meeting, Call, Birthday, Memo or Reminder.Note alarmThe phone beeps, and displays the note. If a call note appears, you can call the displayed number by pressing the call key. To stop the alarm and to view the note, select View. To stop the alarm for 10 minutes, select Snooze. To stop the alarm without viewing the note, select Exit.■To-do listYou can save a note for a task that you have to do, select a priority level for the note, and mark it as done when you have completed it. You can sort the notes by priority or by date.Add a to-do note1. Select Menu > Organizer > To-do list.2. If no note is added, select Add; otherwise, select Options > Add. 3. Write the note, and select Save, the priority, the deadline and the alarm type for the note.4. To view a note, scroll to it, and select View.

Organizer71OptionsYou can also select an option to delete the selected note and delete all the notes that you have marked as done. You can sort the notes by priority or by deadline, send a note as a text message or a multimedia message to another phone, save a note as a calendar note, or access the calendar.While viewing a note, you can also select an option to edit the deadline or priority for the note, or mark the note as done.■NotesYou can use this function for writing and sending notes to compatible devices by Bluetooth, SMS, or MMS.1. Select Menu > Organizer > Notes.2. To make a note if one is not added, select Add; otherwise, select Options > Make a note. 3. Write the note, and select Save.4. To view a note, scroll to it, and select View.OptionsOther options for notes include deleting and editing a note. While editing a note, you can also exit the text editor without saving the changes. If the note is too long to be sent as a text message, the phone prompts you to delete the appropriate number of characters from your note.■WalletIn Wallet, you can save personal information, such as credit card numbers, addresses, and access codes to services that require a user name and password. You can easily retrieve the information in the wallet to fill in online forms, if the service supports it.The first time you access the wallet, you must define the wallet code that protects your encrypted data. 1. When Create wallet code: appears, enter the code, and select OK.2. When Verify wallet code: appears, enter the code again, and select OK. See "Wallet code" on page 19.

Organizer76The exchange rate remains in the memory until you replace it with another one. 4. To perform the currency conversion, enter the amount to be converted, select Options > To home or To foreign.■Countdown timer1. Select Menu > Organizer > Countdown timer, enter the alarm time in hours, minutes, and seconds, and select OK.You can write your own note text, which will display when the time expires.2. To start the countdown timer, select Start. 3. To change the countdown time, select Change time.4. To stop the timer, select Stop timer.If the alarm time is reached when the phone is in the standby mode, the phone sounds a tone and flashes the note text (if it is set) or Countdown completed. Stop the alarm by pressing any key. If no key is pressed, the alarm automatically stops within 30 seconds. To stop the alarm and to delete the note text, select Exit. To restart the countdown timer, select Restart.■StopwatchYou can measure time, take intermediate times, or take lap times using the stopwatch. During timing, the other functions of the phone can be used. To set the stopwatch timing in the background, press the end key.Using the stopwatch or allowing it to run in the background when using other features increases the demand on battery power and reduces the battery life.Select Menu > Organizer > Stopwatch and one of the following options:•Split timing — to take intermediate times. • To start the time observation, select Start.• Select Split every time you want to take an intermediate time.• To stop the time observation, select Stop.• To save the measured time, select Save.• To start the time observation again, select Options > Start. The new time is added to the previous time.

Organizer77• To reset the time without saving it, select Reset.• To set the stopwatch timing in the background, press the end key.•Lap timing — to take lap times. To set the stopwatch timing in the background, press the end key.•Continue — to view the timing that you have set in the background.•Show last time — to view the most recently measured time if the stopwatch is not reset.•View times or Delete times — to view or delete the saved times.

Applications7815. Applications■GamesYour phone software includes some games. LaunchSelect Menu > Applications > Games, scroll to the game you want, and select Open, or press the call key.For options related to a game, see "Other application options" on page 78.DownloadsSelect Menu > Applications > Options > Downloads > Game downloads. The list of available bookmarks is shown. Select More bookmarks to access the list of bookmarks in the Web menu. See "Bookmarks" on page 83.Note: Only install sources that offer adequate protection against harmful software.SettingsTo set sounds, lights, and shakes for the game, select Menu > Applications > Options > Application settings.■CollectionYour phone software includes some Java applications specially designed for this Nokia phone. Launch an applicationSelect Menu > Applications > Collection, scroll to an application, and select Open, or press the call key.Other application optionsDelete — to delete the application or application set from the phone.Details — to give additional information about the application.

Applications79Update version — to check if a new version of the application is available for download from the Web (network service).Web page — to provide further information or additional data for the application from an Internet page. This feature must be supported by the network. It is only shown if an Internet address has been provided with the application.Application access — to restrict the application from accessing the network. Different categories are shown. Select in each category, if available, one of the following permissions:•Ask every time and the phone asks always for net access.•Ask first time only and the phone asks on first attempt to net access.•Always allowed to allow the net access.•Not allowed to not allow the net access.Download applicationsYour phone supports J2ME Java applications. Make sure that the application is compatible with your phone before downloading it. You can download new Java applications in different ways:Select Menu > Applications > Options > Downloads > App. downloads, and the list of available bookmarks is shown. Select More bookmarks to access the list of bookmarks in the Web menu. Select the appropriate bookmark to connect to the page you want. For the availability of different services, pricing, and tariffs, contact your service provider.Select Menu > Web > Downloads. Download an appropriate application or game. See "Downloads" on page 78.Use the game download function. See "Downloads" on page 78.Use the Nokia Application Installer from Nokia PC Suite to download the applications to your phone.Your device may have some bookmarks loaded for sites not affiliated with Nokia. Nokia does not warrant or endorse these sites. If you choose to access them, you should take the same precautions, for security or content, as you would with any Internet site.When downloading an application, it may be saved in the Games menu instead of the Applications menu.

Web8016. WebYour phone has a built-in browser you can use to connect to selected services on the mobile Internet. Many wireless mobile Internet access features are network-dependent, and some features may not be available. Contact your service provider for more information.■Technology backgroundA technology called Wireless Application Protocol (WAP) is to mobile devices what the World Wide Web (WWW) is to personal computers. The mobile community began developing WAP several years ago to provide access to the Internet for mobile users.Most WAP sites are made up of text and hyperlinks. Some pages even contain low-resolution graphics, or require data input. Your service provider and others are free to design WAP sites as they choose, so the sites are as varied as the web pages on the Internet.Internet content on your personal computer is called a “web page.” Internet content on your mobile phone is called a “page,” “WAP card,” or a “Deck of cards.” You may not be able to view all the details of the mobile Internet pages, as page appearance may vary due to screen size.■Service providerBecause mobile Internet content is designed to be viewed from your phone, your service provider is now your mobile Internet service provider as well. It is likely that your service provider has created a home page and set up your WAP browser to go to this page when you log on to the mobile Internet. Once at your service provider’s home page, you may find links to a number of other sites.■Access serviceSet up serviceYou may receive the configuration settings required for browsing as a configuration message from the network operator or service provider that offers the service that you want to use. See "Configuration settings service" on page 9.

Web81You can also enter all the configuration settings manually. See "Configuration" on page 57.Activate the settingsMake sure that the Web settings of the service you want to use are activated.1. Select Menu > Web > Settings > Configuration settings > Configuration.Only the configurations that support the browsing service are shown2. Select a service provider, Default, or Personal config. for browsing. 3. Select Account and a browsing service account contained in the active configuration settings.4. If you want to perform manual user authentication for intranet connections, select Display terminal window > Yes.Connect to a serviceThere are several ways to connect to a service.• To open the service’s home page, select Menu > Web > Home; or in the standby mode, press and hold 0.• To select a bookmark, select Menu > Web > Bookmarks.• To select the last viewed web site, select Menu > Web > Last web address.• To enter the address of the service, select Menu > Web > Go to address, enter the address of the service, and select OK.■BrowseIt should not be necessary to manually configure the browser on your phone. Normally this is done by your service provider once you have subscribed to the feature. Contact your service provider if you have problems using the browser.After you make a connection to the service, you can start browsing its pages. The function of the phone keys may vary in different services. Follow the text guides on the phone display. For more information, contact your service provider.If packet data is selected as the data bearer, is shown in the top left of the display during browsing. If you receive a call or a text message, or make a call during a packet data connection, is shown in the top right of the display to

Web82indicate that the packet data connection is suspended (on hold). After a call, the phone tries to reconnect the packet data connection.Phone keys• Press the scroll key in any direction to browse through the page.• To select a highlighted item, press the call key.• To enter letters and numbers, press the keys, 0 to 9. • To enter special characters, press *.OptionsThe following options may be available: Use wallet info, Home, Shortcuts, Add bookmark, Bookmarks, Page options, History, Downloads, Other options, Reload, and Quit. Your service provider may also offer other options.Direct callingThe browser supports functions that you can access while browsing. You can make a phone call or save a name and a phone number from a page.Appearance settingsWhile browsing, select Options > Other options > Appearance settings; or in the standby mode, select Menu > Web > Settings > Appearance settings and one of the following options:Text wrapping > On — to set the text to continue on the next line on the display. If you select Off, the text is abbreviated.Font size > Extra small, Small, or Medium — to set the font size.Show images > No — to hide pictures on the page. This can speed up the browsing of pages that contain a lot of pictures.Alerts > Alert for unsecure connection > Yes — to set the phone to alert when a encrpyted connection changes to an unencrpyted one during browsing.Alerts > Alert for unsecure items > Yes — to set the phone to alert when a encrpyted page contains an unsecure item. These alerts do not guarantee a secure connection. For more information, see "Browser security" on page 85.Character encoding > Content encoding — to select the encoding for the browser page content.

Web83Character encoding > Unicode (UTF-8) web addresses > On — to set the phone to send a URL as a UTF-8 encoding. You may need this setting when you access a Web page created in a foreign language.CookiesA cookie is data that a site saves in the cache memory of your phone. Cookies are saved until you clear the cache memory. See "Cache memory" on page 85.While browsing, select Options > Other options > Security > Cookie settings; or in the standby mode, select Menu > Web > Settings > Security settings > Cookies. To allow or prevent the phone receiving cookies, select Allow or Reject.Scripts over secure connectionYou can select whether to allow the running of scripts from a secure page. The phone supports WML scripts.1. While browsing, select Options > Other options > Security settings > Script settings; or in the standby mode, select Menu > Web > Settings > Security settings > Scripts over secure connection.2. To allow the scripts, select Allow.■BookmarksYou can save page addresses as bookmarks in the phone memory.1. While browsing, select Options > Bookmarks; or in the standby mode, select Menu > Web > Bookmarks.2. Scroll to a bookmark, and select it; or press the call key to make a connection to the page associated with the bookmark.3. Select Options to view, edit, delete, or send the bookmark; create a new bookmark; or save the bookmark to a folder.Your device may have some bookmarks loaded for sites not affiliated with Nokia. Nokia does not warrant or endorse these sites. If you choose to access them, you should take the same precautions, for security or content, as you would with any Internet site.

Web84ReceiveWhen you have received a bookmark that is sent as a bookmark, 1 bookmark received is displayed. To save the bookmark, select Show > Save. To view or delete the bookmark, select Options > View or Delete. To discard the bookmark directly after you have received the bookmark, select Exit > OK.■Downloads (network service)To download more tones, images, games, or applications to your phone, select Menu > Web > Downloads > Tone downloads, Graphic downloads, Game downloads, Video downloads, Theme downloads, or App. downloads.Only install and use applications and other software from sources that offer adequate security and protection against harmful software.To save all downloaded files automatically in Gallery, select Menu > Web > Settings > Downloading settings > Automatic saving > On.■Service inbox (network service)The phone is able to receive service messages (pushed messages) sent by your service provider. Service messages are notifications of news headlines, for example, and they may contain a text message or an address of a service.To access the Service inbox in the standby mode, when you have received a service message, select Show. If you select Exit, the message is moved to the Service inbox. To access the Service inbox later, select Menu > Web > Service inbox.To access the Service inbox while browsing, select Options > Other options > Service inbox. Scroll to the message you want, and select Retrieve to activate the browser and download the marked content. To display detailed information on the service notification, or to delete the message, select Options > Details or Delete.SettingsSelect Menu > Web > Settings > Service inbox settings.To set whether you want to receive service message, select Service messages > On or Off.

Web85To set the phone to receive service messages only from content authors approved by the service provider, select Message filter > On. To view the list of the approved content authors, select Trusted channels.To set the phone to automatically activate the browser from the standby mode when the phone has received a service message, select Automatic connection > On. If you select Off, the phone activates the browser only after you select Retrieve when the phone has received a service message.■Cache memoryA cache is a memory location that is used to store data temporarily. If you have tried to access or have accessed confidential information requiring passwords, empty the cache after each use. The information or services you have accessed is stored in the cache.• To empty the cache, while browsing, select Options > Other options > Clear the cache.• To empty the cache, while in the standby mode, select Menu > Web > Clear the cache.■Browser securitySecurity features may be required for some services, such as online banking or shopping. For such connections, you need security certificates and possibly a security module, which may be available on your SIM card. For more information, contact your service provider.Security moduleThe security module improves security services for applications requiring a browser connection, and allows you to use a digital signature. The security module may contain certificates as well as private and public keys. The certificates are saved in the security module by the service provider. Select Menu > Web > Settings > Security settings > Security module settings and one of the following options:Security module details — to show the security module title, status, manufacturer, and serial number.

Web86Module PIN request — to set the phone to ask for the module PIN when using services provided by the security module. Enter the code, and select On. To disable the module PIN request, select Off.Change module PIN — to change the module PIN, if allowed by the security module. Enter the current module PIN code, then enter the new code twice.Change signing PIN — to change the signing PIN code for the digital signature. Select the signing PIN you want to change. Enter the current PIN code, then enter the new code twice.See also "Access codes" on page 18.CertificatesImportant: Note that even if the use of certificates makes the risks involved in remote connections and software installation considerably smaller, they must be used correctly in order to benefit from increased security. The existence of a certificate does not offer any protection by itself; the certificate manager must contain correct, authentic, or trusted certificates for increased security to be available. Certificates have a restricted lifetime. If Expired certificate or Certificate not valid yet is shown even if the certificate should be valid, check that the current date and time in your device are correct.Before changing any certificate settings, you must make sure that you really trust the owner of the certificate and that the certificate really belongs to the listed owner.There are three kinds of certificates: server certificates, authority certificates, and user certificates. You may receive these certificates from your service provider. Authority certificates and user certificates may also be saved in the security module by the service provider.To view the list of the authority or user certificates downloaded into your phone, select Menu > Web > Settings > Security settings > Authority certificates or User certificates.The security indicator is displayed during a connection, if the data transmission between the phone and the content server is encrypted.The security icon does not indicate that the data transmission between the gateway and the content server (or place where the requested resource is stored) is secure. The service provider secures the data transmission between the gateway and the content server.

Web87Digital signatureYou can make digital signatures with your phone if your SIM card has a security module. Using the digital signature can be the same as signing your name to a paper bill, contract, or other document. To make a digital signature, select a link on a page, such as the title of the book you want to buy and its price. The text to sign, which may include the amount and date, is shown.Check that the header text is Read and that the digital signature icon is shown.If the digital signature icon does not appear, there is a security breach, and you should not enter any personal data such as your signing PIN.To sign the text, read all of the text first, and then select Sign.The text may not fit within a single screen. Therefore, make sure to scroll through and read all of the text before signing.Select the user certificate you want to use. Enter the signing PIN (see "Access codes" on page 18), and select OK. The digital signature icon disappears, and the service may display a confirmation of your purchase.

SIM services8817. SIM servicesYour SIM card may provide additional services that you can access. This menu is shown only if it is supported by your SIM card. The name and contents of the menu depend on the SIM card.For availability, rates, and information on using SIM services, contact your service provider.You can set the phone to show you the confirmation messages sent between your phone and the network when you are using the SIM services by selecting the option Yes within the menu Confirm SIM service actions, in Phone settings.Note that accessing these services may involve sending messages or making a phone call for which you may be charged.

Computer connectivity8918. Computer connectivity■Nokia PC SuiteNokia PC Suite software is available for the Nokia 8800 phone. Nokia PC Suite is a collection of powerful tools that you can use to manage your phone features and data. Each component is a separate program that includes online helps. Nokia PC Suite software, installation instructions, and other documentation is provided free of charge and can be downloaded from the software downloads of the Nokia web site: www.nokiausa.com/pcsuite.■Packet data, HSCSD, and CSDWith your phone you can use the packet data, HSCSD (high-speed circuit switched data), and CSD (circuit switched data, GSM data) services.For availability and subscription to data services, contact your service provider.The use of HSCSD services consumes the phone battery faster than normal voice or data calls. You may need to connect the phone to a charger for the duration of data transfer.See "Packet data (EGPRS) (network service)" on page 53.■Data communication applicationsFor information on using a data communication application, refer to the documentation provided with it.Making or answering phone calls during a computer connection is not recommended, as it might disrupt the operation.For better performance during data calls, place the phone on a stationary surface, with the keypad facing downward. Do not move the phone by holding it in your hand during a data call.

Enhancements9019. EnhancementsIf you want to enhance phone functionality, a range of enhancements is available for you. You can select any of these items to help accommodate your specific communication needs. Check the model number of any charger before use with this device. This device is intended for use when supplied with power from the ACP-12 charger.Warning: Use only batteries, chargers and enhancements approved by Nokia for use with this particular model. The use of any other types may invalidate any approval or warranty, and may be dangerous. For availability of approved enhancements, please check with your dealer. Your device and its enhancements may contain small parts. Keep them out of reach of small children.A few practical rules about accessories and enhancements:• Keep all accessories and enhancements out of the reach of small children.• When you disconnect the power cord of any accessory or enhancement, grasp and pull the plug, not the cord.• Check regularly that enhancements installed in a vehicle are mounted and are operating properly.• Installation of any complex car enhancements must be made by qualified personnel only.

Reference information9120. Reference information■Battery informationCharging and dischargingYour device is powered by a rechargeable battery. The full performance of a new battery is achieved only after two or three complete charge and discharge cycles. The battery can be charged and discharged hundreds of times but it will eventually wear out. When the talk and standby times are noticeably shorter than normal, replace the battery. Use only Nokia approved batteries, and recharge your battery only with Nokia approved chargers designated for this device.Unplug the charger from the electrical plug and the device when not in use. Do not leave the battery connected to a charger. Overcharging may shorten its lifetime. If left unused, a fully charged battery will lose its charge over time. Temperature extremes can affect the ability of your battery to charge.Use the battery only for its intended purpose. Never use any charger or battery that is damaged.Do not short-circuit the battery. Accidental short-circuiting can occur when a metallic object such as a coin, clip, or pen causes direct connection of the positive (+) and negative (-) terminals of the battery. (These look like metal strips on the battery.) This might happen, for example, when you carry a spare battery in your pocket or purse. Short-circuiting the terminals may damage the battery or the connecting object.Leaving the battery in hot or cold places, such as in a closed car in summer or winter conditions, will reduce the capacity and lifetime of the battery and its ability to charge. Always try to keep the battery between 15°C and 25°C (59°F and 77°F). A device with a hot or cold battery may not work temporarily, even when the battery is fully charged. Battery performance is particularly limited in temperatures well below freezing.Do not dispose of batteries in a fire as they may explode. Batteries may also explode if damaged. Dispose of batteries according to local regulations. Please recycle when possible. Do not dispose as household waste.

Reference information93authorized Nokia service point or dealer for assistance. The use of a battery that is not approved by the manufacturer may be dangerous and may result in poor performance and damage to your device and its enhancements. It may also invalidate any approval or warranty applying to the device. To find out more about original Nokia batteries visit www.nokia.com/battery. ■Additional safety informationOperating environmentRemember to follow any special regulations in force in any area and always switch off your device when its use is prohibited or when it may cause interference or danger. Use the device only in its normal operating positions. This device meets RF exposure guidelines when used either in the normal use position against the ear or when positioned at least 5/8 inch (1.5 cm) away from the body. When a carry case, belt clip, or holder is used for body-worn operation, it should not contain metal and should position the device at least 5/8 inch (1.5 cm) away from your body.In order to transmit data files or messages, this device requires a quality connection to the network. In some cases, transmission of data files or messages may be delayed until such a connection is available. Ensure the above separation distance instructions are followed until the transmission is completed.Parts of the device are magnetic. Metallic materials may be attracted to the device, and persons with a hearing aid should not hold the device to the ear with the hearing aid. Always secure the device in its holder, because metallic materials may be attracted by the earpiece. Do not place credit cards or other magnetic storage media near the device, because information stored on them may be erased.Medical devicesOperation of any radio transmitting equipment, including wireless phones, may interfere with the functionality of inadequately protected medical devices. Consult a physician or the manufacturer of the medical device to determine if they are adequately shielded from external RF energy or if you have any questions. Switch off your phone in health care facilities when any regulations posted in these areas instruct you to do so. Hospitals or health care facilities may be using equipment that could be sensitive to external RF energy.

Reference information94PacemakersPacemaker manufacturers recommend that a minimum separation of 6 in (15.3 cm) be maintained between a wireless phone and a pacemaker to avoid potential interference with the pacemaker. These recommendations are consistent with the independent research by and recommendations of Wireless Technology Research. To minimize the potential for interference, persons with pacemakers should• Always keep the device more than 6 in (15.3 cm) from their pacemaker when the device is switched on• Not carry the device in a breast pocket• Hold the device to the ear opposite the pacemakerIf you have any reason to suspect that interference is taking place, switch off your device immediately.Hearing aidsSome digital wireless devices may interfere with some hearing aids. If interference occurs, consult your service provider.VehiclesRF signals may affect improperly installed or inadequately shielded electronic systems in motor vehicles such as electronic fuel injection systems, electronic antiskid (antilock) braking systems, electronic speed control systems, air bag systems. For more information, check with the manufacturer or its representative of your vehicle or any equipment that has been added.Only qualified personnel should service the device, or install the device in a vehicle. Faulty installation or service may be dangerous and may invalidate any warranty that may apply to the device. Check regularly that all wireless device equipment in your vehicle is mounted and operating properly. Do not store or carry flammable liquids, gases, or explosive materials in the same compartment as the device, its parts, or enhancements. For vehicles equipped with an air bag, remember that an air bags inflate with great force. Do not place objects, including installed or portable wireless equipment in the area over the air bag or in the air bag deployment area. If in-vehicle wireless equipment is improperly installed and the air bag inflates, serious injury could result.AirplanesUsing your device while flying may be prohibited. Switch off your device before boarding an aircraft. The use of wireless teledevices in an aircraft may be

Reference information95dangerous to the operation of the aircraft, disrupt the wireless telephone network, and may be illegal.Potentially explosive environmentsSwitch off your device when in any area with a potentially explosive atmosphere and obey all signs and instructions. Potentially explosive atmospheres include areas where you would normally be advised to turn off your vehicle engine. Sparks in such areas could cause an explosion or fire resulting in bodily injury or even death. Switch off the device at refuelling points such as near gas pumps at service stations. Observe restrictions on the use of radio equipment in fuel depots, storage, and distribution areas, chemical plants or where blasting operations are in progress. Areas with a potentially explosive atmosphere are often but not always clearly marked. They include below deck on boats, chemical transfer or storage facilities, vehicles using liquefied petroleum gas (such as propane or butane), and areas where the air contains chemicals or particles such as grain, dust or metal powders.■Emergency callsImportant: Wireless phones, including this phone, operate using radio signals, wireless networks, landline networks, and user-programmed functions. Because of this, connections in all conditions cannot be guaranteed. You should never rely solely on any wireless phone for essential communications like medical emergencies.To make an emergency call:1. If the phone is not on, switch it on. Check for adequate signal strength. Some networks may require that a valid SIM card is properly inserted in the phone.2. Press the end key as many times as needed to clear the display and ready the phone for calls. 3. Enter the official emergency number for your present location. Emergency numbers vary by location.4. Press the call key.If certain features are in use, you may first need to turn those features off before you can make an emergency call. Consult this guide or your service provider. When making an emergency call, give all the necessary information as accurately as possible. Your wireless phone may be the only means of communication at the scene of an accident. Do not end the call until given permission to do so.

Reference information96■Certification Information (SAR)THE NOKIA 8800 DEVICE MEETS INTERNATIONAL GUIDELINES FOR EXPOSURE TO RADIO WAVESYour mobile device is a radio transmitter and receiver. It is designed and manufactured not to exceed the limits for exposure to radio frequency (RF) energy recommended by international guidelines (ICNIRP). These limits establish permitted levels of RF energy for the general population. The guidelines are based on standards that were developed by independent scientific organizations through periodic and thorough evaluation of scientific studies. The standards and guidelines include a substantial safety margin designed to assure the safety of the public, regardless of age and health and to account for any variations in measurements.The exposure guidelines for mobile devices employ a unit of measurement known as the Specific Absorption Rate or SAR. The SAR limit stated in the international guidelines is 2.0 watts/kilogram (W/kg) averaged over ten grams of tissue. Tests for SAR are conducted using standard operating positions with the device transmitting at its highest certified power level in all tested frequency bands. The actual SAR level of an operating device can be well below the maximum value because the device is designed to use only the power required to reach the network. That amount changes depending on a number of factors such as how close you are to a network base station. The highest SAR value when tested according to international testing procedures for use at the ear for device type RM-13 is 0.50 W/kg. Your phone’s device type is listed on the label located under the battery.SAR values may vary depending on national reporting and testing requirements and the network band. Use of device accessories and enhancements may result in different SAR values. Additional SAR information may be provided under product information at www.nokia.com. USA and Canada: The SAR limit of USA (FCC) and Canada (IC) is 1.6 W/kg averaged over one gram of tissue. Device type RM-13 has also been tested against this SAR limit. The highest SAR value reported under this standard during product certification for use at the ear is 0.46 W/kg and when properly worn on the body is 0.37 W/kg. Information about this device can be found on the FCC's website at http://www.fcc.gov/oet/fccid by searching the equipment authorization system using FCC ID: QTKRM-13.

Reference information97■Charging, talk and standby timesThis section provides information about battery charging times with the Travel Charger (ACP-12), talk-times, and standby times. Be aware that the information in this section is subject to change. For more information, contact your service provider.Charging timeThe following charging time is approximate with the BL-5X 600 mAh Li-Ion internal fixed battery:Travel Charger (ACP-12): up to 1 hour, 5 minutesTalk and standby timesOperation times are estimates only and depend on signal strength, phone use, network conditions, features used, battery age and condition (including charging habits), temperatures to which the battery is exposed, and many other factors.Talk time: up to 2 hours, 40 minutesStandby time: up to 200 hours■Technical informationDimensions:• Width: 45mm• Height: 107 mm• Thickness: 16.5 mmWeight: 141 gmWireless networks: GSM 900, 1800 and 1900 Size (volume): 67 cu cmFrequency range (Tx):• GSM 900: 880–915 MHz• GSM 1800: 1710–1785 MHz• GSM 1900: 1850–1910 MHzFrequency range (Rx):• GSM 900: 925–960 MHz

Reference information98• GSM 1800: 1805–1880 MHz• GSM 1900: 1930–1990 MHzTransmitter output power:• 2W (GSM 900 max)• 1W (GSM 1800/GSM 1900 max)Operating temperature: 14° F to + 131° F (-10° C to + 55° C)■Patent informationManufactured or sold under one or more of the following US patents:4868846 4945633 5001372 5053928 5083240 51011755124672 5151946 5152004 5173927 5212834 52300915241583 5266782 5271056 5311151 5317283 53316385335362 5341149 5353328 5371481 5378935 53847825390223 5392460 5396657 5400949 5408504 54164355430740 5442521 5444816 5446364 5446422 54774225479476 5442521 5444816 5446364 5446422 54774225479476 5487084 5526366 5534878 5548616 55510675553125 5557639 5565821 5566201 5570369 55812445594797 5600708 5606548 5613235 5625274 56403955664053 5675611 5677620 5692032 5697074 56994825701392 5722074 5729541 5760568 5787341 57941425797102 5802465 5805301 5809413 5819165 58218915822366 5827082 5835858 5835889 5839101 5842141

Reference information995844884 5845219 5850607 5857151 5859843 58621785870683 5884103 5884190 5889770 5898775 58989255903832 5903839 5907823 5912570 5914690 59147965917868 5920826 5926147 5926769 5929813 59302335946651 5953665 5956332 5956625 5956633 59603545960389 5963901 5966378 5977887 5983081 59871375987639 5991857 6005857 6006114 6009328 60118536011971 6014113 6014551 6014573 6025802 60261616028567 6031827 6035189 6035194 6038238 60437606047196 6049796 6050415 6054954 6054966 60554396060193 6069923 6072787 6073001 6079993 60817326084471 6084855 6084920 6084962 6088746 60945876097964 6105784 6112099 6115617 6118775 61190026119180 6121846 6122498 6128322 6128509 61306506133884 6137789 6138091 6140966 6144243 61446766148209 6151485 6151507 6163609 6164547 61670386167248 6167273 6170073 6171127 6178535 61821016184592 6185295 6185302 6185422 6188909 61953386199035 6201712 6201876 6202109 6219560 62230376223059 6223059 6240076 6249584 6259312 62627356266321 6266330 6269126 6271794 6272361 62824366285888 6292668 6295286 6307512 6308084 6311054

Reference information1006314166 6317083 6324389 6324412 6333716 63472186356759 6359865 6359904 6363259 6370362 63703896377803 6377820 6381468 6385254 6385451 63926056392660 6400958 6417817 6430163 6434133 64377116438370 6445932 6453179 6456237 6456826 64632786470470 6487397 6510148 6522670 6591116 6606508D481,674

Care and maintenance101Care and maintenanceYour device is a product of superior design and craftsmanship and should be treated with care. The suggestions below will help you protect your warranty coverage and enjoy your device for many years.• Keep the device dry. Precipitation, humidity, and all types of liquids or moisture can contain minerals that will corrode electronic circuits. If your device does get wet, remove the battery and allow the device to dry completely before replacing it.• Do not use or store the device in dusty, dirty areas. Its moving parts and electronic components can be damaged.• Do not store the device in hot areas. High temperatures can shorten the life of electronic devices, damage batteries, and warp or melt certain plastics.• Do not store the device in cold areas. When the device returns to its normal temperature, moisture can form inside the device and damage electronic circuit boards.• Do not attempt to open the device other than as instructed in this guide.• Do not drop, knock, or shake the device. Rough handling can break internal circuit boards and fine mechanics. • Do not use harsh chemicals, cleaning solvents, or strong detergents to clean the device. • Do not paint the device. Paint can clog the moving parts and prevent proper operation.• Use a soft, clean, dry cloth to clean any lenses (such as camera, proximity sensor, and light sensor lenses).• Use chargers indoors.• Always create a backup of data you want to keep (such as contacts and calendar notes) before sending your device to a service facility.All of the above suggestions apply equally to your device, battery, charger, or any enhancement. If any device is not working properly, take it to the nearest authorized service facility for service.

Statements from other agencies102Statements from other agencies■Message from the CTIA (Cellular Telecommunications & Internet Association) to all users of mobile phones© 2001 Cellular Telecommunications & Internet Association. All Rights Reserved.1250 Connecticut Avenue, NW Suite 800, Washington, DC 20036. Phone: (202) 785-0081Safety is the most important call you will ever make.A Guide to Safe and Responsible Wireless Phone UseTens of millions of people in the U.S. today take advantage of the unique combination of convenience, safety and value delivered by the wireless telephone. Quite simply, the wireless phone gives people the powerful ability to communicate by voice—almost anywhere, anytime—with the boss, with a client, with the kids, with emergency personnel or even with the police. Each year, Americans make billions of calls from their wireless phones, and the numbers are rapidly growing.But an important responsibility accompanies those benefits, one that every wireless phone user must uphold. When driving a car, driving is your first responsibility. A wireless phone can be an invaluable tool, but good judgment must be exercised at all times while driving a motor vehicle—whether on the phone or not.The basic lessons are ones we all learned as teenagers. Driving requires alertness, caution and courtesy. It requires a heavy dose of basic common sense—keep your head up, keep your eyes on the road, check your mirrors frequently and watch out for other drivers. It requires obeying all traffic signs and signals and staying within the speed limit. It means using seatbelts and requiring other passengers to do the same. But with wireless phone use, driving safely means a little more. This brochure is a call to wireless phone users everywhere to make safety their first priority when behind the wheel of a car. Wireless telecommunications is keeping us in touch, simplifying our lives, protecting us in emergencies and providing opportunities to help others in need. When it comes to the use of wireless phones, safety is your most important call. Wireless Phone "Safety Tips"Below are safety tips to follow while driving and using a wireless phone which should be easy to remember.

Statements from other agencies1031. Get to know your wireless phone and its features such as speed dial and redial. Carefully read your instruction manual and learn to take advantage of valuable features most phones offer, including automatic redial and memory. Also, work to memorize the phone keypad so you can use the speed dial function without taking your attention off the road.2. When available, use a hands-free device. A number of hands-free wireless phone accessories are readily available today. Whether you choose an installed mounted device for your wireless phone or a speaker phone accessory, take advantage of these devices if available to you.3. Position your wireless phone within easy reach. Make sure you place your wireless phone within easy reach and where you can grab it without removing your eyes from the road. If you get an incoming call at an inconvenient time, if possible, let your voice mail answer it for you.4. Suspend conversations during hazardous driving conditions or situations. Let the person you are speaking with know you are driving; if necessary, suspend the call in heavy traffic or hazardous weather conditions. Rain, sleet, snow and ice can be hazardous, but so is heavy traffic. As a driver, your first responsibility is to pay attention to the road.5. Do not take notes or look up phone numbers while driving. If you are reading an address book or business card, or writing a "to do" list while driving a car, you are not watching where you are going. It’s common sense. Don’t get caught in a dangerous situation because you are reading or writing and not paying attention to the road or nearby vehicles.6. Dial sensibly and assess the traffic; if possible, place calls when you are not moving or before pulling into traffic. Try to plan your calls before you begin your trip or attempt to coincide your calls with times you may be stopped at a stop sign, red light or otherwise stationary. But if you need to dial while driving, follow this simple tip—dial only a few numbers, check the road and your mirrors, then continue.7. Do not engage in stressful or emotional conversations that may be distracting. Stressful or emotional conversations and driving do not mix—they are distracting and even dangerous when you are behind the wheel of a car. Make people you are talking with aware you are driving and if necessary, suspend conversations which have the potential to divert your attention from the road.8. Use your wireless phone to call for help. Your wireless phone is one of the greatest tools you can own to protect yourself and your family in dangerous situations—with your phone at your side, help is only three numbers away. Dial 9-1-1 or other local emergency number in the case of fire, traffic

Statements from other agencies104accident, road hazard or medical emergency. Remember, it is a free call on your wireless phone!9. Use your wireless phone to help others in emergencies. Your wireless phone provides you a perfect opportunity to be a "Good Samaritan" in your community. If you see an auto accident, crime in progress or other serious emergency where lives are in danger, call 9-1-1 or other local emergency number, as you would want others to do for you.10. Call roadside assistance or a special wireless nonemergency assistance number when necessary. Certain situations you encounter while driving may require attention, but are not urgent enough to merit a call for emergency services. But you still can use your wireless phone to lend a hand. If you see a broken-down vehicle posing no serious hazard, a broken traffic signal, a minor traffic accident where no one appears injured or a vehicle you know to be stolen, call roadside assistance or other special non-emergency wireless number.Careless, distracted individuals and people driving irresponsibly represent a hazard to everyone on the road. Since 1984, the Cellular Telecommunications Industry Association and the wireless industry have conducted educational outreach to inform wireless phone users of their responsibilities as safe drivers and good citizens. As we approach a new century, more and more of us will take advantage of the benefits of wireless telephones. And, as we take to the roads, we all have a responsibility to drive safely.The wireless industry reminds you to use your phone safely when driving.For more information, please call 1-888-901-SAFE.For updates: http://www.wow-com.com/consumer/issues/driving/articles.cfm?ID=85■Message from the FDA The U.S. Food and Drug Administration (FDA) provides the following consumer information about wireless phones.See http://www.fda.gov/cellphones/ for updated information.Do wireless phones pose a health hazard?The available scientific evidence does not show that any health problems are associated with using wireless phones. There is no proof, however, that wireless phones are absolutely safe. Wireless phones emit low levels of radiofrequency energy (RF) in the microwave range while being used. They also emit very low levels of RF when in the stand-by mode. Whereas high levels of RF can produce health effects (by heating tissue), exposure to low level RF that does not produce heating effects causes no known adverse health effects. Many studies of low

Statements from other agencies105level RF exposures have not found any biological effects. Some studies have suggested that some biological effects may occur, but such findings have not been confirmed by additional research. In some cases, other researchers have had difficulty in reproducing those studies, or in determining the reasons for inconsistent results.What is FDA's role concerning the safety of wireless phones?Under the law, FDA does not review the safety of radiation-emitting consumer products such as wireless phones before they can be sold, as it does with new drugs or medical devices. However, the agency has authority to take action if wireless phones are shown to emit radiofrequency energy (RF) at a level that is hazardous to the user. In such a case, FDA could require the manufacturers of wireless phones to notify users of the health hazard and to repair, replace or recall the phones so that the hazard no longer exists.Although the existing scientific data do not justify FDA regulatory actions, FDA has urged the wireless phone industry to take a number of steps, including the following:• Support needed research into possible biological effects of RF of the type emitted by wireless phones; • Design wireless phones in a way that minimizes any RF exposure to the user that is not necessary for device function; and • Cooperate in providing users of wireless phones with the best possible information on possible effects of wireless phone use on human health.FDA belongs to an interagency working group of the federal agencies that have responsibility for different aspects of RF safety to ensure coordinated efforts at the federal level. The following agencies belong to this working group:• National Institute for Occupational Safety and Health• Environmental Protection Agency• Federal Communications Commission• Occupational Safety and Health Administration• National Telecommunications and Information AdministrationThe National Institutes of Health participates in some interagency working group activities, as well.FDA shares regulatory responsibilities for wireless phones with the Federal Communications Commission (FCC). All phones that are sold in the United States must comply with FCC safety guidelines that limit RF exposure. FCC relies on FDA and other health agencies for safety questions about wireless phones.

Statements from other agencies106FCC also regulates the base stations that the wireless phone networks rely upon. While these base stations operate at higher power than do the wireless phones themselves, the RF exposures that people get from these base stations are typically thousands of times lower than those they can get from wireless phones. Base stations are thus not the primary subject of the safety questions discussed in this document.What is FDA doing to find out more about the possible health effects of wireless phone RF?FDA is working with the U.S. National Toxicology Program and with groups of investigators around the world to ensure that high priority animal studies are conducted to address important questions about the effects of exposure to radiofrequency energy (RF). FDA has been a leading participant in the World Health Organization International Electromagnetic Fields (EMF) Project since its inception in 1996. An influential result of this work has been the development of a detailed agenda of research needs that has driven the establishment of new research programs around the world. The Project has also helped develop a series of public information documents on EMF issues. FDA and the Cellular Telecommunications & Internet Association (CTIA) have a formal Cooperative Research and Development Agreement (CRADA) to do research on wireless phone safety. FDA provides the scientific oversight, obtaining input from experts in government, industry, and academic organizations. CTIA-funded research is conducted through contracts to independent investigators. The initial research will include both laboratory studies and studies of wireless phone users. The CRADA will also include a broad assessment of additional research needs in the context of the latest research developments around the world.What steps can I take to reduce my exposure to radiofrequency energy from my wireless phone?If there is a risk from these products--and at this point we do not know that there is--it is probably very small. But if you are concerned about avoiding even potential risks, you can take a few simple steps to minimize your exposure to radiofrequency energy (RF). Since time is a key factor in how much exposure a person receives, reducing the amount of time spent using a wireless phone will reduce RF exposure.If you must conduct extended conversations by wireless phone every day, you could place more distance between your body and the source of the RF, since the exposure level drops off dramatically with distance. For example, you could use a headset and carry the wireless phone away from your body or use a wireless phone connected to a remote antenna

Statements from other agencies107Again, the scientific data do not demonstrate that wireless phones are harmful. But if you are concerned about the RF exposure from these products, you can use measures like those described above to reduce your RF exposure from wireless phone use.What about children using wireless phones?The scientific evidence does not show a danger to users of wireless phones, including children and teenagers. If you want to take steps to lower exposure to radiofrequency energy (RF), the measures described above would apply to children and teenagers using wireless phones. Reducing the time of wireless phone use and increasing the distance between the user and the RF source will reduce RF exposure. Some groups sponsored by other national governments have advised that children be discouraged from using wireless phones at all. For example, the government in the United Kingdom distributed leaflets containing such a recommendation in December 2000. They noted that no evidence exists that using a wireless phone causes brain tumors or other ill effects. Their recommendation to limit wireless phone use by children was strictly precautionary; it was not based on scientific evidence that any health hazard exists.Do hands-free kits for wireless phones reduce risks from exposure to RF emissions?Since there are no known risks from exposure to RF emissions from wireless phones, there is no reason to believe that hands-free kits reduce risks. Hands-free kits can be used with wireless phones for convenience and comfort. These systems reduce the absorption of RF energy in the head because the phone, which is the source of the RF emissions, will not be placed against the head. On the other hand, if the phone is mounted against the waist or other part of the body during use, then that part of the body will absorb more RF energy. Wireless phones marketed in the U.S. are required to meet safety requirements regardless of whether they are used against the head or against the body. Either configuration should result in compliance with the safety limit.Do wireless phone accessories that claim to shield the head from RF radiation work?Since there are no known risks from exposure to RF emissions from wireless phones, there is no reason to believe that accessories that claim to shield the head from those emissions reduce risks. Some products that claim to shield the user from RF absorption use special phone cases, while others involve nothing more than a metallic accessory attached to the phone. Studies have shown that these products generally do not work as advertised. Unlike "hand-free" kits, these so-called "shields" may interfere with proper operation of the phone. The phone

Statements from other agencies108may be forced to boost its power to compensate, leading to an increase in RF absorption. In February 2002, the Federal trade Commission (FTC) charged two companies that sold devices that claimed to protect wireless phone users from radiation with making false and unsubstantiated claims. According to FTC, these defendants lacked a reasonable basis to substantiate their claim.How does FCC Audit Cell Phone RF?After FCC grants permission for a particular cellular telephone to be marketed, FCC will occasionally conduct “post-grant” testing to determine whether production versions of the phone are being produced to conform with FCC regulatory requirements. The manufacturer of a cell phone that does not meet FCC’s regulatory requirements may be required to remove the cell phone from use and to refund the purchase price or provide a replacement phone, and may be subject to civil or criminal penalties. In addition, if the cell phone presents a risk of injury to the user, FDA may also take regulatory action. The most important post-grant test, from a consumer’s perspective, is testing of the RF emissions of the phone. FCC measures the Specific Absorption Rate (SAR) of the phone, following a very rigorous testing protocol. As is true for nearly any scientific measurement, there is a possibility that the test measurement may be less than or greater than the actual RF emitted by the phone. This difference between the RF test measurement and actual RF emission is because test measurements are limited by instrument accuracy, because test measurement and actual use environments are different, and other variable factors. This inherent variability is known as “measurement uncertainty.” When FCC conducts post-grant testing of a cell phone, FCC takes into account any measurement uncertainty to determine whether regulatory action is appropriate. This approach ensures that when FCC takes regulatory action, it will have a sound, defensible scientific basis.FDA scientific staff reviewed the methodology used by FCC to measure cell phone RF, and agreed it is an acceptable approach, given our current understanding of the risks presented by cellular phone RF emissions. RF emissions from cellular phones have not been shown to present a risk of injury to the user when the measured SAR is less than the safety limits set by FCC (an SAR of 1.6 w/kg). Even in a case where the maximum measurement uncertainty permitted by current measurement standards was added to the maximum permissible SAR, the resulting SAR value would be well below any level known to produce an acute effect. Consequently, FCC’s approach with measurement uncertainty will not result in consumers being exposed to any known risk from the RF emitted by cellular telephones.FDA will continue to monitor studies and literature reports concerning acute effects of cell phone RF, and concerning chronic effects of long-term exposure to

Statements from other agencies109cellular telephone RF (that is, the risks from using a cell phone for many years). If new information leads FDA to believe that a change to FCC’s measurement policy may be appropriate, FDA will contact FCC and both agencies will work together to develop a mutually-acceptable approach.Updated July 29, 2003

Index110IndexNUMERICS1-touch dialing 20Aaccess codes 18alarm clock 69antenna 13Bbatterycharge 12strength indicator 16bluetooth 52bookmarks 83browser 81appearance settings 82options 82business cards 42Ccalendar 69callanswer 20counters 47end 20make 20options 21reject 20timers 47voice mail 36waiting 20camera 63color schemes 50contacts 40add 40copy 41delete 41edit 41search 40

Index111Eemergency calls 95enhancements 53, 90Kkeyguard 18automatic 56security 56Mmedia player 63menufunctions 22views 22message counter 39messages 23info 36multimedia 26text 23voice 35music player 64my shortcuts 51NNetwork Services 6Nokia PC Suite 89notescalendar 70to-do 70numbersinfo 45my 46service 46Ooperator menu 60Pphonekeys and parts 15label 8profiles 49Rradio 65

Index112recent call lists 47Sscreen saver 16, 50service commands 36service inbox 84settingscall 55configuration 57display 50enhancement 57message 36modem 53phone 56restore factory 59security 58time and date 51tones 50shared memory 7SIM card 11standby mode 16summary after call 56synchronization 54Ttext entry 24themes 49to-do list 70Uuser guide updates 8Vvoice dialing 44voice tags 51Wwallpaper 50warranty 8

Navigation menu

Upload a User Manual

Namespaces

Wiki Guide
HTML
PDF
Info

Views

User Manual
Discussion / Help

Navigation

© 2024 UserManual.wiki | Privacy Policy

Contact Us
DMCA